# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ # # On the handling of kernel options # # All kernel options should be listed in LINT64, with suitable # descriptions. Negative options (options that make some code not # compile) should be commented out; LINT64 should compile as much code # as possible. Try to structure option-using code so that a single # option only switch code on, or only switch code off, to make it # possible to have a full compile-test. If necessary, you can include # "opt_lint.h" and check for COMPILING_LINT to get maximum code # coverage. # # All new options shall also be listed in either "conf/options" or # "platform//conf/options". Options that affect a single # source-file .[c|s] should be directed into "opt_.h", while # options that affect multiple files should either go in # "opt_global.h" if this is a kernel-wide option (used just about # everywhere), or in "opt_.h" if it affect # only some files. Note that the effect of listing only an option # without a header-file-name in conf/options (and cousins) is that the # last convention is followed. # # This handling scheme is not yet fully implemented. # # # Format of this file: # Option name filename # # If filename is missing, the default is # opt_.h # Adaptec Array Controller driver options AAC_DEBUG opt_aac.h ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory # mapped I/O AMR_DEBUG opt_amr.h TWA_DEBUG opt_twa.h #options for ACPI support ACPI_DEBUG opt_acpi.h # Miscellaneous options. COMPILING_LINT opt_lint.h DDB DDB_TRACE DDB_UNATTENDED opt_ddb.h GDB_REMOTE_CHAT opt_ddb.h KTRACE LIBICONV MD_NSECT opt_md.h MD_ROOT opt_md.h MD_ROOT_SIZE opt_md.h MFI_DEBUG opt_mfi.h NSWAPDEV opt_swap.h NSWBUF_MIN opt_swap.h PPS_SYNC opt_ntp.h QUOTA SUIDDIR opt_suiddir.h SHMMIN opt_sysvipc.h SHMMNI opt_sysvipc.h SHMSEG opt_sysvipc.h SEMMAP opt_sysvipc.h SEMMNI opt_sysvipc.h SEMMNS opt_sysvipc.h SEMMNU opt_sysvipc.h SEMMSL opt_sysvipc.h SEMOPM opt_sysvipc.h SEMUME opt_sysvipc.h MSGMNB opt_sysvipc.h MSGMNI opt_sysvipc.h MSGSEG opt_sysvipc.h MSGSSZ opt_sysvipc.h MSGTQL opt_sysvipc.h NO_SYSCTL_DESCR opt_global.h UCONSOLE ICMP_BANDLIM # POSIX kernel options _KPOSIX_PRIORITY_SCHEDULING opt_posix.h # Do we want the config file compiled into the kernel? INCLUDE_CONFIG_FILE opt_config.h # Options for static file systems. These should only be used at config # time, since the corresponding lkms cannot work if there are any static # dependencies. Unusability is enforced by hiding the defines for the # options in a never-included header. EXT2FS opt_dontuse.h HAMMER opt_dontuse.h HAMMER2 opt_dontuse.h HPFS opt_dontuse.h MFS opt_dontuse.h MSDOSFS opt_dontuse.h NTFS opt_dontuse.h NULLFS opt_dontuse.h PROCFS opt_dontuse.h SMBFS opt_dontuse.h TMPFS opt_dontuse.h UDF opt_dontuse.h AUTOFS opt_dontuse.h FUSE opt_dontuse.h # These static filesystems has one slightly bogus static dependency in # sys/platform/.../x86_64/autoconf.c. If any of these filesystems are # statically compiled into the kernel, code for mounting them as root # filesystems will be enabled - but look below. Boot-code is purposely # unavailable for the LKM-based versions. CD9660 FFS NFS # filesystems and libiconv bridge CD9660_ICONV opt_dontuse.h MSDOSFS_ICONV opt_dontuse.h NTFS_ICONV opt_dontuse.h # SMB/CIFS requester NETSMB opt_netsmb.h # If you are following the conditions in the copyright, # you can enable soft-updates which will speed up a lot of things # and make the system safer from crashes at the same time. # otherwise a STUB module will be compiled in. SOFTUPDATES opt_ffs.h # Enable fast hash lookups for large directories on UFS-based filesystems. UFS_DIRHASH opt_ufs.h # The above static dependencies are planned removed, with a # _ROOT option to control if it usable as root. This list # allows these options to be present in config files already (though # they won't make any difference yet). NFS_ROOT opt_nfsroot.h # Options used only in subr_param.c. HZ_DEFAULT opt_param.h MAXFILES opt_param.h NBUF opt_param.h NMBCLUSTERS opt_param.h NMBUFS opt_param.h VM_BCACHE_SIZE_MAX opt_param.h VM_SWZONE_SIZE_MAX opt_param.h MAXUSERS DFLDSIZ opt_param.h MAXDSIZ opt_param.h MAXSSIZ opt_param.h # Generic SCSI options. CAM_MAX_HIGHPOWER opt_cam.h CAMDEBUG opt_cam.h CAM_DEBUG_DELAY opt_cam.h CAM_DEBUG_BUS opt_cam.h CAM_DEBUG_TARGET opt_cam.h CAM_DEBUG_LUN opt_cam.h CAM_DEBUG_FLAGS opt_cam.h SCSI_DELAY opt_scsi.h SCSI_NO_SENSE_STRINGS opt_scsi.h SCSI_NO_OP_STRINGS opt_scsi.h # iSCSI options ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h # Options used only in cam/scsi/scsi_cd.c CHANGER_MIN_BUSY_SECONDS opt_cd.h CHANGER_MAX_BUSY_SECONDS opt_cd.h # Options used only in cam/scsi/scsi_sa.c. SA_IO_TIMEOUT opt_sa.h SA_SPACE_TIMEOUT opt_sa.h SA_REWIND_TIMEOUT opt_sa.h SA_ERASE_TIMEOUT opt_sa.h SA_1FM_AT_EOD opt_sa.h # Options used only in cam/scsi/scsi_pt.c SCSI_PT_DEFAULT_TIMEOUT opt_pt.h # Options used only in cam/scsi/scsi_ses.c SES_ENABLE_PASSTHROUGH opt_ses.h # Options used in dev/sym/ (Symbios SCSI driver). SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) # Allows the ncr to take precedence # 1 (1<<0) -> 810a, 860 # 2 (1<<1) -> 825a, 875, 885, 895 # 4 (1<<2) -> 895a, 896, 1510d SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 # disabled:0 (default), enabled:1 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking # disabled:0, enabled:1 (default) SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported # default:8, range:[1..64] # Options used only in pci/ncr.c SCSI_NCR_DEBUG opt_ncr.h SCSI_NCR_MAX_SYNC opt_ncr.h SCSI_NCR_MAX_WIDE opt_ncr.h SCSI_NCR_MYADDR opt_ncr.h # Options used only in pci/isp_pci.c ISP_TARGET_MODE opt_isp.h # Options used in the 'nata' ATA/ATAPI driver ATA_STATIC_ID opt_ata.h # Options used in the 'nata' chipset driver ATA_NO_ACARD opt_ata.h ATA_NO_ACERLABS opt_ata.h ATA_NO_AHCI opt_ata.h ATA_NO_AMD opt_ata.h ATA_NO_CYPRESS opt_ata.h ATA_NO_CYRIX opt_ata.h ATA_NO_HIGHPOINT opt_ata.h ATA_NO_INTEL opt_ata.h ATA_NO_ITE opt_ata.h ATA_NO_JMICRON opt_ata.h ATA_NO_MARVELL opt_ata.h ATA_NO_NATIONAL opt_ata.h ATA_NO_NETCELL opt_ata.h ATA_NO_NVIDIA opt_ata.h ATA_NO_PROMISE opt_ata.h ATA_NO_SERVERWORKS opt_ata.h ATA_NO_SILICONIMAGE opt_ata.h ATA_NO_SIS opt_ata.h ATA_NO_VIA opt_ata.h PVSCSI_DEBUG_LOGGING opt_pvscsi.h # Net stuff. # altq stuff ALTQ opt_global.h ALTQ_CBQ opt_altq.h ALTQ_RED opt_altq.h ALTQ_RIO opt_altq.h ALTQ_HFSC opt_altq.h ALTQ_PRIQ opt_altq.h ALTQ_FAIRQ opt_altq.h ALTQ_NOPCC opt_altq.h ALTQ_DEBUG opt_altq.h ACCEPT_FILTER_DATA ACCEPT_FILTER_HTTP BOOTP opt_bootp.h BOOTP_COMPAT opt_bootp.h BOOTP_NFSROOT opt_bootp.h BOOTP_WIRED_TO opt_bootp.h CARP opt_carp.h MROUTING opt_mrouting.h PIM opt_mrouting.h INET opt_inet.h INET6 opt_inet6.h IPDIVERT DUMMYNET opt_ipdn.h DUMMYNET_DEBUG opt_ipdn.h IPFIREWALL opt_ipfw.h IPFIREWALL3 opt_ipfw.h IPFIREWALL_DEBUG opt_ipfw.h IPFIREWALL_VERBOSE opt_ipfw.h IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h IPV6FIREWALL opt_ip6fw.h IPV6FIREWALL_VERBOSE opt_ip6fw.h IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h IPSTEALTH LIBMCHAIN MPLS opt_mpls.h TCPDEBUG #TCP_SIGNATURE opt_inet.h TCP_DROP_SYNFIN opt_tcp_input.h ICMPPRINTFS XBONEHACK MBUF_STRESS_TEST opt_mbuf_stress_test.h # (New netgraph, port still in progress) # # Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. # Each netgraph node type can be either be compiled into the kernel # or loaded dynamically. To get the former, include the corresponding # option below. Each type has its own man page, e.g. ng_async(4). NETGRAPH7 NETGRAPH7_DEBUG opt_netgraph.h NETGRAPH7_ASYNC opt_netgraph.h NETGRAPH7_ATMLLC opt_netgraph.h NETGRAPH7_ATM_ATMPIF opt_netgraph.h NETGRAPH7_BLUETOOTH opt_netgraph.h NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h NETGRAPH7_BPF opt_netgraph.h NETGRAPH7_BRIDGE opt_netgraph.h NETGRAPH7_CAR opt_netgraph.h NETGRAPH7_CISCO opt_netgraph.h NETGRAPH7_DEFLATE opt_netgraph.h NETGRAPH7_DEVICE opt_netgraph.h NETGRAPH7_ECHO opt_netgraph.h NETGRAPH7_EIFACE opt_netgraph.h NETGRAPH7_ETF opt_netgraph.h NETGRAPH7_ETHER opt_netgraph.h NETGRAPH7_FEC opt_netgraph.h NETGRAPH7_FRAME_RELAY opt_netgraph.h NETGRAPH7_GIF opt_netgraph.h NETGRAPH7_GIF_DEMUX opt_netgraph.h NETGRAPH7_HOLE opt_netgraph.h NETGRAPH7_HUB opt_netgraph.h NETGRAPH7_IFACE opt_netgraph.h NETGRAPH7_IP_INPUT opt_netgraph.h NETGRAPH7_IPFW opt_netgraph.h NETGRAPH7_KSOCKET opt_netgraph.h NETGRAPH7_L2TP opt_netgraph.h NETGRAPH7_LMI opt_netgraph.h # MPPC compression requires proprietary files (not included) NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h NETGRAPH7_NAT opt_netgraph.h NETGRAPH7_NETFLOW opt_netgraph.h NETGRAPH7_ONE2MANY opt_netgraph.h NETGRAPH7_PPP opt_netgraph.h NETGRAPH7_PPPOE opt_netgraph.h NETGRAPH7_PPTPGRE opt_netgraph.h NETGRAPH7_PRED1 opt_netgraph.h NETGRAPH7_RFC1490 opt_netgraph.h NETGRAPH7_SOCKET opt_netgraph.h NETGRAPH7_SPLIT opt_netgraph.h NETGRAPH7_SPPP opt_netgraph.h NETGRAPH7_TAG opt_netgraph.h NETGRAPH7_TCPMSS opt_netgraph.h NETGRAPH7_TEE opt_netgraph.h NETGRAPH7_TTY opt_netgraph.h NETGRAPH7_UI opt_netgraph.h NETGRAPH7_VJC opt_netgraph.h # NgATM options NGATM7_ATM opt_netgraph.h NGATM7_ATMBASE opt_netgraph.h NGATM7_SSCOP opt_netgraph.h NGATM7_SSCFU opt_netgraph.h NGATM7_UNI opt_netgraph.h NGATM7_CCATM opt_netgraph.h # Netgraph(4). Use option NETGRAPH to enable the base netgraph code. # Each netgraph node type can be either be compiled into the kernel # or loaded dynamically. To get the former, include the corresponding # option below. Each type has its own man page, e.g. ng_async(8). NETGRAPH NETGRAPH_ASYNC opt_netgraph.h NETGRAPH_BPF opt_netgraph.h NETGRAPH_BRIDGE opt_netgraph.h NETGRAPH_CISCO opt_netgraph.h NETGRAPH_ECHO opt_netgraph.h NETGRAPH_EIFACE opt_netgraph.h NETGRAPH_ETHER opt_netgraph.h NETGRAPH_FEC opt_netgraph.h NETGRAPH_FRAME_RELAY opt_netgraph.h NETGRAPH_HOLE opt_netgraph.h NETGRAPH_IFACE opt_netgraph.h NETGRAPH_KSOCKET opt_netgraph.h NETGRAPH_LMI opt_netgraph.h NETGRAPH_L2TP opt_netgraph.h # MPPC compression requires proprietary files (not included) NETGRAPH_MPPC_COMPRESSION opt_netgraph.h NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h NETGRAPH_ONE2MANY opt_netgraph.h NETGRAPH_PPP opt_netgraph.h NETGRAPH_PPPOE opt_netgraph.h NETGRAPH_PPTPGRE opt_netgraph.h NETGRAPH_RFC1490 opt_netgraph.h NETGRAPH_SOCKET opt_netgraph.h NETGRAPH_TEE opt_netgraph.h NETGRAPH_TTY opt_netgraph.h NETGRAPH_UI opt_netgraph.h NETGRAPH_VJC opt_netgraph.h # AGP options AGP_DEBUG opt_agp.h # DRM options DRM_DEBUG opt_drm.h VGA_SWITCHEROO opt_drm.h # DPT driver debug flags DPT_MEASURE_PERFORMANCE opt_dpt.h DPT_HANDLE_TIMEOUTS opt_dpt.h DPT_TIMEOUT_FACTOR opt_dpt.h DPT_LOST_IRQ opt_dpt.h DPT_RESET_HBA opt_dpt.h # Misc debug flags. Most of these should probably be replaced with # 'DEBUG', and then let people recompile just the interesting modules # with 'make CC="cc -DDEBUG"'. CLUSTERDEBUG opt_debug_cluster.h DEBUG_1284 opt_ppb_1284.h VP0_DEBUG opt_vpo.h LPT_DEBUG opt_lpt.h PLIP_DEBUG opt_plip.h LOCKF_DEBUG opt_debug_lockf.h # Fb options FB_DEBUG opt_fb.h FB_INSTALL_CDEV opt_fb.h # ppbus related options PERIPH_1284 opt_ppb_1284.h DONTPROBE_1284 opt_ppb_1284.h # smbus related options ENABLE_ALART opt_intpm.h # These cause changes all over the kernel NO_LWKT_SPLIT_USERPRI opt_global.h BLKDEV_IOSIZE opt_global.h DEBUG opt_global.h DEBUG_LOCKS opt_global.h DEBUG_LOCKS_LATENCY opt_global.h DEBUG_CRIT_SECTIONS opt_global.h DIAGNOSTIC opt_global.h INVARIANTS opt_global.h VFS_BIO_DEBUG opt_global.h SOCKBUF_DEBUG opt_global.h PANIC_DEBUG opt_global.h MBUF_DEBUG opt_global.h PMAP_DEBUG opt_global.h VM_PAGE_DEBUG opt_global.h SLAB_DEBUG opt_global.h # Sample system/interrupt PC DEBUG_PCTRACK opt_pctrack.h # These are VM related options NO_SWAPPING opt_vm.h # sys/netkey KEY # Size of the kernel message buffer MSGBUF_SIZE opt_msgbuf.h # NFS options NFS_MINATTRTIMO opt_nfs.h NFS_MAXATTRTIMO opt_nfs.h NFS_MINDIRATTRTIMO opt_nfs.h NFS_MAXDIRATTRTIMO opt_nfs.h NFS_GATHERDELAY opt_nfs.h NFS_UIDHASHSIZ opt_nfs.h NFS_WDELAYHASHSIZ opt_nfs.h NFS_MUIDHASHSIZ opt_nfs.h NFS_NOSERVER opt_nfs.h NFS_DEBUG opt_nfs.h # MSDOSFS options MSDOSFS_DEBUG opt_msdosfs.h # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver BROOKTREE_SYSTEM_DEFAULT opt_bktr.h BROOKTREE_ALLOC_PAGES opt_bktr.h BKTR_OVERRIDE_CARD opt_bktr.h BKTR_OVERRIDE_TUNER opt_bktr.h BKTR_OVERRIDE_DBX opt_bktr.h BKTR_OVERRIDE_MSP opt_bktr.h BKTR_SYSTEM_DEFAULT opt_bktr.h BKTR_ALLOC_PAGES opt_bktr.h BKTR_USE_PLL opt_bktr.h BKTR_GPIO_ACCESS opt_bktr.h BKTR_NO_MSP_RESET opt_bktr.h BKTR_430_FX_MODE opt_bktr.h BKTR_SIS_VIA_MODE opt_bktr.h BKTR_NEW_MSP34XX_DRIVER opt_bktr.h # Various mi ISA bus flags COM_ESP opt_sio.h COM_MULTIPORT opt_sio.h BREAK_TO_DEBUGGER opt_comconsole.h ALT_BREAK_TO_DEBUGGER opt_comconsole.h # options for bus/device framework BUS_DEBUG opt_bus.h # options for USB support OHCI_DEBUG opt_usb.h USB_DEBUG opt_usb.h # options for the Realtek RTL8188*U/RTL8192CU driver (urtwn) URTWN_WITHOUT_UCODE opt_urtwn.h # Vinum options VINUMDEBUG opt_vinum.h # Embedded system options UKBD_DFLT_KEYMAP opt_ukbd.h INIT_PATH opt_init_path.h ROOTDEVNAME opt_rootdevname.h FDC_DEBUG opt_fdc.h PCFCLOCK_VERBOSE opt_pcfclock.h PCFCLOCK_MAX_RETRIES opt_pcfclock.h # Network device queue based polling IFPOLL_ENABLE opt_ifpoll.h # options for ubsec driver UBSEC_DEBUG opt_ubsec.h UBSEC_RNDTEST opt_ubsec.h UBSEC_NO_RNG opt_ubsec.h # options for hifn driver HIFN_DEBUG opt_hifn.h HIFN_RNDTEST opt_hifn.h HIFN_NO_RNG opt_hifn.h # options for safenet driver SAFE_DEBUG opt_safe.h SAFE_NO_RNG opt_safe.h SAFE_RNDTEST opt_safe.h # KTR options KTR opt_global.h KTR_ENTRIES opt_global.h KTR_ALL opt_ktr.h KTR_ACPI_EC opt_ktr.h KTR_CTXSW opt_ktr.h KTR_DMCRYPT opt_ktr.h KTR_ETHERNET opt_ktr.h KTR_HAMMER opt_ktr.h KTR_IFQ opt_ktr.h KTR_IF_BGE opt_ktr.h KTR_IF_EM opt_ktr.h KTR_IF_EMX opt_ktr.h KTR_IF_START opt_ktr.h KTR_IPIQ opt_ktr.h KTR_KERNENTRY opt_ktr.h KTR_LAPIC opt_ktr.h KTR_MEMORY opt_ktr.h KTR_SERIALIZER opt_ktr.h KTR_SPIN_CONTENTION opt_ktr.h KTR_TESTLOG opt_ktr.h KTR_TOKENS opt_ktr.h KTR_TSLEEP opt_ktr.h KTR_USCHED_BSD4 opt_ktr.h KTR_USCHED_DFLY opt_ktr.h KTR_VERBOSE opt_ktr.h KTR_IF_POLL opt_ktr.h KTR_UDP opt_ktr.h KTR_SOWAKEUP opt_ktr.h # NTFS options NTFS_DEBUG opt_ntfs.h # options for the Atheros driver ATH_DEBUG opt_ath.h #ATH_DEBUG_ALQ opt_ath.h ATH_DIAGAPI opt_ath.h #ATH_EEPROM_FIRMWARE opt_ath.h #ATH_ENABLE_11N opt_ath.h ATH_ENABLE_DFS opt_ath.h #ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h ATH_KTR_INTR_DEBUG opt_ath.h #ATH_TX99_DIAG opt_ath.h # ...and its HAL AH_AR5416_INTERRUPT_MITIGATION opt_ah.h AH_ASSERT opt_ah.h AH_DEBUG opt_ah.h #AH_DEBUG_ALQ opt_ah.h #AH_DEBUG_COUNTRY opt_ah.h AH_INTERRUPT_DEBUGGING opt_ah.h AH_MAXCHAN opt_ah.h AH_NEED_DESC_SWAP opt_ah.h AH_PRIVATE_DIAG opt_ah.h AH_RXCFG_SDMAMW_4BYTES opt_ah.h AH_SUPPORT_AR5416 opt_ah.h AH_SUPPORT_AR9130 opt_ah.h AH_SUPPORT_AR9330 opt_ah.h AH_SUPPORT_AR9340 opt_ah.h AH_USE_INIPDGAIN opt_ah.h #AH_WRITE_EEPROM opt_ah.h #AH_WRITE_REGDOMAIN opt_ah.h # bce driver BCE_RSS_DEBUG opt_bce.h BCE_TSS_DEBUG opt_bce.h # bnx driver BNX_RSS_DEBUG opt_bnx.h BNX_TSO_DEBUG opt_bnx.h BNX_TSS_DEBUG opt_bnx.h # bwn driver BWN_DEBUG opt_bwn.h BWN_RXRING_SLOTS opt_bwn.h BWN_TXRING_SLOTS opt_bwn.h # siba_bwn driver SIBA_DEBUG opt_siba.h # emx driver EMX_RSS_DEBUG opt_emx.h EMX_TSO_DEBUG opt_emx.h EMX_TSS_DEBUG opt_emx.h # jme driver JME_RSS_DEBUG opt_jme.h # igb driver IGB_RSS_DEBUG opt_igb.h IGB_TSS_DEBUG opt_igb.h IGB_MSIX_DEBUG opt_igb.h # ix driver IX_RSS_DEBUG opt_ix.h # Options for the Intel 802.11ac wireless driver IWM_DEBUG opt_iwm.h # Options for the Intel 802.11n wireless driver IWN_DEBUG opt_iwn.h # Options for the Intel 3945ABG wireless driver WPI_DEBUG opt_wpi.h # dcons options DCONS_BUF_SIZE opt_dcons.h DCONS_POLL_HZ opt_dcons.h DCONS_FORCE_CONSOLE opt_dcons.h DCONS_FORCE_GDB opt_dcons.h # deprecated drivers and options I_WANT_DEPRECATED_STUFF opt_deprecated.h # Receive Side Scaling (now basecode) RSS_DEBUG opt_rss.h # Panic settings WDOG_DISABLE_ON_PANIC opt_panic.h ERROR_LED_ON_PANIC opt_panic.h # 802.11 support layer IEEE80211_DEBUG opt_wlan.h IEEE80211_DEBUG_REFCNT opt_wlan.h IEEE80211_SUPPORT_MESH opt_wlan.h IEEE80211_SUPPORT_SUPERG opt_wlan.h IEEE80211_SUPPORT_TDMA opt_wlan.h # 802.11 TDMA support TDMA_SLOTLEN_DEFAULT opt_tdma.h TDMA_SLOTCNT_DEFAULT opt_tdma.h TDMA_BINTVAL_DEFAULT opt_tdma.h TDMA_TXRATE_11B_DEFAULT opt_tdma.h TDMA_TXRATE_11G_DEFAULT opt_tdma.h TDMA_TXRATE_11A_DEFAULT opt_tdma.h TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h TDMA_TXRATE_HALF_DEFAULT opt_tdma.h TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h TDMA_TXRATE_11NA_DEFAULT opt_tdma.h TDMA_TXRATE_11NG_DEFAULT opt_tdma.h # Sound options SND_DEBUG opt_snd.h SND_DIAGNOSTIC opt_snd.h SND_FEEDER_MULTIFORMAT opt_snd.h SND_FEEDER_FULL_MULTIFORMAT opt_snd.h SND_FEEDER_RATE_HP opt_snd.h SND_OLDSTEREO opt_snd.h PANIC_REBOOT_WAIT_TIME opt_panic.h # This options turns TPM into entropy source. TPM_HARVEST opt_tpm.h # Evdev protocol support EVDEV_SUPPORT opt_evdev.h EVDEV_DEBUG opt_evdev.h # Sysctl debugging SYSCTL_DEBUG opt_sysctl.h # Obsolete options (will be removed in the future) # NDISAPI opt_dontuse.h