#
#
-# SCSI host adapters: `aha', `aic', `bt'
+# SCSI host adapters: `aic' and `bt'
#
# adv: All Narrow SCSI bus AdvanSys controllers.
# adw: Second Generation AdvanSys controllers including the ADV940UW.
-# aha: Adaptec 154x
# ahc: Adaptec 274x/284x/294x
# aic: Adaptec 152x
# bt: Most Buslogic controllers
device bt0 at isa? port IO_BT0
device adv0 at isa?
device adw
-device aha0 at isa?
device aic0 at isa?
device ncv
device nsp
device fd1 at fdc0 drive 1
#
-# Other standard PC hardware: `mse', `sio', etc.
-#
-# mse: Logitech and ATI InPort bus mouse ports
# sio: serial ports (see sio(4))
-device mse0 at isa? port 0x23c irq 5
-
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
#
device puc
#
-# Network interfaces: `ed', `el', `ep', `ie', `is', `le', `lnc'
+# Network interfaces: `ed', `ep', `is', `lnc'
#
# ar: Arnet SYNC/570i hdlc sync 2/4 port V.35/X.21 serial driver (requires sppp)
# cs: IBM Etherjet and other Crystal Semi CS89x0-based adapters
# ed: Western Digital and SMC 80xx; Novell NE1000 and NE2000; 3Com 3C503
-# el: 3Com 3C501 (slow!)
# ep: 3Com 3C509
# ex: Intel EtherExpress Pro/10 and other i82595-based adapters
# fe: Fujitsu MB86960A/MB86965A Ethernet
-# ie: AT&T StarLAN 10 and EN100; 3Com 3C507; unknown NI5210; Intel EtherExpress
-# le: Digital Equipment EtherWorks 2 and EtherWorks 3 (DEPCA, DE100,
-# DE101, DE200, DE201, DE202, DE203, DE204, DE205, DE422)
# lnc: Lance/PCnet cards (Isolan, Novell NE2100, NE32-VL, AMD Am7990 & Am79C960)
-# rdp: RealTek RTL 8002-based pocket ethernet adapters
# sbni: Granch SBNI12-xx adapters
# sbsh: Granch SBNI16 SHDSL modem PCI adapters
# sr: RISCom/N2 hdlc sync 1/2 port V.35/X.21 serial driver (requires sppp)
-# wl: Lucent Wavelan (ISA card only).
# wi: Lucent WaveLAN/IEEE 802.11 PCMCIA adapters. Note: this supports both
# the PCMCIA and ISA cards: the ISA card is really a PCMCIA to ISA
# bridge with a PCMCIA adapter plugged into it.
device ar0 at isa? port 0x300 irq 10 iomem 0xd0000
device cs0 at isa? port 0x300
device ed0 at isa? port 0x280 irq 5 iomem 0xd8000
-device el0 at isa? port 0x300 irq 9
device ep
device ex
device fe0 at isa? port 0x300
-device ie0 at isa? port 0x300 irq 5 iomem 0xd0000
-device ie1 at isa? port 0x360 irq 7 iomem 0xd0000
-device le0 at isa? port 0x300 irq 5 iomem 0xd0000
device lnc0 at isa? port 0x280 irq 10 drq 0
-device rdp0 at isa? port 0x378 irq 7 flags 2
device sbni0 at isa? port 0x210 irq 5 flags 0xefdead
device sln
device sr
device wlan_wep # 802.11 WEP support
device wlan_xauth # 802.11 WPA or 802.1x authentication for AP
device wlan_amrr # 802.11 AMRR TX rate control algorithm
-options WLCACHE # enables the signal-strength cache
-options WLDEBUG # enables verbose debugging output
device an # Aironet Communications 4500/4800
device ath # Atheros AR521x
options AH_SUPPORT_AR5416
device wi # WaveLAN/IEEE, PRISM-II, Spectrum24 802.11DS
#device rtw # RealTek 8180
#device acx # TI ACX100/ACX111.
-device wl0 at isa? port 0x300 # T1 speed ISA/radio lan
device xe # Xircom PCMCIA
device ral # Ralink Technology 802.11 wireless NIC
device wpi
#
# Miscellaneous hardware:
#
-# wt: Wangtek and Archive QIC-02/QIC-36 tape drives
-# ctx: Cortex-I frame grabber
# apm: Laptop Advanced Power Management (experimental)
-# spigot: The Creative Labs Video Spigot video-acquisition board
# bktr: Brooktree bt848/848a/849a/878/879 video capture and TV Tuner board
# cy: Cyclades serial driver
-# dgb: Digiboard PC/Xi and PC/Xe series driver (ALPHA QUALITY!)
-# dgm: Digiboard PC/Xem driver
-# gp: National Instruments AT-GPIB and AT-GPIB/TNT board
-# asc: GI1904-based hand scanners, e.g. the Trust Amiscan Grey
-# gsc: Genius GS-4500 hand scanner.
# joy: joystick
-# labpc: National Instrument's Lab-PC and Lab-PC+
-# rc: RISCom/8 multiport card
# rp: Comtrol Rocketport(ISA) - single card
-# tw: TW-523 power line interface for use with X-10 home control products
# si: Specialix SI/XIO 4-32 port terminal multiplexor
# spic: Sony Programmable I/O controller (VAIO notebooks)
# stl: Stallion EasyIO and EasyConnection 8/32 (ISA and PCI), EasyConnection 8/64 PCI
# If apm is omitted, some systems require sysctl -w kern.timecounter.method=1
# for correct timekeeping.
-# Notes on the spigot:
-# The video spigot is at 0xad6. This port address can not be changed.
-# The irq values may only be 10, 11, or 15
-# I/O memory is an 8kb region. Possible values are:
-# 0a0000, 0a2000, ..., 0fffff, f00000, f02000, ..., ffffff
-# The start address must be on an even boundary.
-# Add the following option if you want to allow non-root users to be able
-# to access the spigot. This option is not secure because it allows users
-# direct access to the I/O page.
-# options SPIGOT_UNSECURE
-
# Notes on the Comtrol Rocketport driver:
#
# The exact values used for rp0 depend on how many boards you have
#
# device rp
-# Notes on the Digiboard driver:
-#
-# The following flag values have special meanings:
-# 0x01 - alternate layout of pins (dgb & dgm)
-# 0x02 - use the windowed PC/Xe in 64K mode (dgb only)
-
# Notes on the Specialix SI/XIO driver:
# **This is NOT a Specialix supported Driver!**
# The host card is memory, not IO mapped.
# Stallion: flags 1 iosiz 0x10000
# For the PCI cards, "device stl" will suffice.
-# for the SoundBlaster 16 multicd - up to 4 devices
-device wt0 at isa? port 0x300 irq 5 drq 1
-device ctx0 at isa? port 0x230 iomem 0xd0000
-device spigot0 at isa? port 0xad6 irq 15 iomem 0xee000
device apm0
-device gp0 at isa? port 0x2c0
-device gsc0 at isa? port IO_GSC1 drq 3
device joy0 at isa? port IO_GAME
device cy0 at isa? irq 10 iomem 0xd4000 iosiz 0x2000
-#device dgb0 at isa? port 0x220 iomem 0xfc000
-#options NDGBPORTS=16 # Defaults to 16*NDGB
-device dgm0 at isa? port 0x104 iomem 0xd0000
-device labpc0 at isa? port 0x260 irq 5
-device rc0 at isa? port 0x220 irq 12
device nrp
-#device rp0 at isa? port 0x280
-# the port and irq for tw0 are fictitious
-device tw0 at isa? port 0x380 irq 11
device si0 at isa? iomem 0xd0000 irq 12
-device asc0 at isa? port IO_ASC1 drq 3 irq 10
device spic0 at isa? irq 0 port 0x10a0
device stl0 at isa? port 0x2a0 irq 10
device stli0 at isa? port 0x2a0 iomem 0xcc000 flags 23 iosiz 0x1000