LINT*: Fix some wrong paths in the comments.

diff --git a/sys/config/LINT b/sys/config/LINT
index 7ac2a0b..09c36d5 100644 (file)
--- a/sys/config/LINT
+++ b/sys/config/LINT
@@ -1824,7 +1824,7 @@ device            trm             # Tekram DC395U/UW/F and DC315U
 #      ISP_TARGET_MODE         -       enable target mode operation
 #options       ISP_TARGET_MODE=1
 
-# Options used in dev/sym/ (Symbios SCSI driver).
+# Options used in dev/disk/sym/ (Symbios SCSI driver).
 #options       SYM_SETUP_LP_PROBE_MAP  #-Low Priority Probe Map (bits)
                                        # Allows the ncr to take precedence
                                        # 1 (1<<0) -> 810a, 860
@@ -2199,7 +2199,7 @@ options           ASR_COMPAT
 #                           option will create more trouble than solve.
 #   DPT_TIMEOUT_FACTOR      Used to compute the excessive amount of time to
 #                           wait when timing out with the above option.
-#  DPT_DEBUG_xxxx           These are controllable from sys/dev/dpt/raid/dpt.h
+#  DPT_DEBUG_xxxx           These are controllable from sys/dev/raid/dpt/dpt.h
 #  DPT_LOST_IRQ             When enabled, will try, once per second, to catch
 #                           any interrupt that got lost.  Seems to help in some
 #                           DPT-firmware/Motherboard combinations.  Minimal

diff --git a/sys/config/LINT64 b/sys/config/LINT64
index 74e3631..9b1c481 100644 (file)
--- a/sys/config/LINT64
+++ b/sys/config/LINT64
@@ -1609,7 +1609,7 @@ device            trm             # Tekram DC395U/UW/F and DC315U
 #      ISP_TARGET_MODE         -       enable target mode operation
 #options       ISP_TARGET_MODE=1
 
-# Options used in dev/sym/ (Symbios SCSI driver).
+# Options used in dev/disk/sym/ (Symbios SCSI driver).
 #options       SYM_SETUP_LP_PROBE_MAP  #-Low Priority Probe Map (bits)
                                        # Allows the ncr to take precedence
                                        # 1 (1<<0) -> 810a, 860
@@ -1967,7 +1967,7 @@ device            asr
 #                           option will create more trouble than solve.
 #   DPT_TIMEOUT_FACTOR      Used to compute the excessive amount of time to
 #                           wait when timing out with the above option.
-#  DPT_DEBUG_xxxx           These are controllable from sys/dev/dpt/raid/dpt.h
+#  DPT_DEBUG_xxxx           These are controllable from sys/dev/raid/dpt/dpt.h
 #  DPT_LOST_IRQ             When enabled, will try, once per second, to catch
 #                           any interrupt that got lost.  Seems to help in some
 #                           DPT-firmware/Motherboard combinations.  Minimal