+++ /dev/null
-.\"
-.\" Copyright (c) 2000,2001,2002 Søren Schmidt <sos@FreeBSD.org>
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer,
-.\" without modification, immediately at the beginning of the file.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. The name of the author may not be used to endorse or promote products
-.\" derived from this software without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\" $FreeBSD: src/usr.sbin/burncd/burncd.8,v 1.6.2.8 2003/03/12 22:08:13 trhodes Exp $
-.\" $DragonFly: src/usr.sbin/burncd/burncd.8,v 1.8 2008/05/02 02:05:07 swildner Exp $
-.\"
-.Dd December 4, 2001
-.Os
-.Dt BURNCD 8
-.Sh NAME
-.Nm burncd
-.Nd control the ATAPI CD-R/RW driver
-.Sh SYNOPSIS
-.Nm
-.Op Fl delmnpqtv
-.Op Fl f Ar device
-.Op Fl s Ar speed
-.Op Ar command
-.Op Ar command Ar
-.Sh DESCRIPTION
-The
-.Nm
-utility is used to burn CD-R/RW media using the ATAPI cd driver.
-.Pp
-Available options and operands:
-.Bl -tag -width XXXXXXXXXXXX
-.It Fl d
-burn the CD-R/RW in DAO (disk at once) mode.
-.It Fl e
-eject the media when done.
-.It Fl f Ar device
-set the device to use for the burning process.
-.It Fl l
-read a list of image files from filename.
-.It Fl m
-close disk in multisession mode (otherwise disk is closed as singlesession).
-.It Fl n
-do not write gaps between data tracks in DAO mode.
-.It Fl p
-use preemphasis on audio tracks.
-.It Fl q
-quiet, do not print progress messages.
-.It Fl s Ar speed
-set the speed of the burner device.
-Defaults to 1.
-Specify
-.Dq Li max
-to use the drive's fastest speed.
-.It Fl t
-test write, do not actually write on the media.
-.It Fl v
-verbose, print extra progress messages.
-.El
-.Pp
-.Ar command
-may be one of:
-.Bl -tag -width XXXXXXXXXXXX
-.It Cm msinfo
-Show the first LBA of the last track on the media
-and the next writeable address on the media for use with the
-.Xr mkisofs 8 Ns 's
-.Fl C
-switch when adding additional data to ISO file systems with extra sessions.
-.It Cm blank
-Blank a CD-RW medium.
-This uses the fast blanking method, so data are not physically overwritten,
-only those areas that make the media appear blank for further usage are erased.
-.It Cm erase
-Erase a CD-RW medium.
-This erases the entire media.
-Can take up to 1 hour to finish.
-.It Cm fixate
-Fixate the medium so that the TOC is generated and the media can be used
-in an ordinary CD drive.
-The driver defaults to creating singlesession media (see
-.Fl m
-option).
-Should be the last command to
-.Nm
-as the program exits when this has been done.
-Ignored in DAO mode (see
-.Fl d
-option).
-.It Cm raw | audio
-Set the write mode to produce audio (raw mode) tracks for the following
-images on the command line.
-.It Cm data | mode1
-Set the write mode to produce data (mode1) tracks for the following
-image files
-on the command line.
-.It Cm mode2
-Set the write mode to produce data (mode2) tracks for the following
-image files
-on the command line.
-.It Cm XAmode1
-Set the write mode to produce data (XAmode1) tracks for the following image
-files on the command line.
-.It Cm XAmode2
-Set the write mode to produce data (XAmode2) tracks for the following image
-files on the command line.
-.It Cm vcd
-Set the write mode to produce VCD/SVCD tracks for the following image files
-on the command line.
-This automatically sets DAO
-.Pq Fl d
-and
-.Dq "no gaps"
-.Pq Fl n
-modes.
-.It Ar file
-All other arguments are treated as filenames of images to write to the media,
-or in case the
-.Fl l
-option is used as files containing lists of images.
-.El
-.Pp
-Files whose length are not a multiple of the current media blocksize are
-quietly zero padded to fit the blocksize requirement.
-The conventional filename
-.Fl
-refers to stdin, and can only be used once.
-.Sh EXAMPLES
-The typical usage for burning a data CD-R:
-.Pp
-.Dl "burncd -f /dev/acd0c data file1 fixate"
-.Pp
-The typical usage for burning an audio CD-R:
-.Pp
-.Dl "burncd -f /dev/acd0c audio file1 file2 file3 fixate"
-.Pp
-The typical usage for burning an audio CD-R in DAO mode:
-.Pp
-.Dl "burncd -f /dev/acd0c -d audio file1 file2 file3"
-.Pp
-The typical usage for burning a mixed mode CD-R:
-.Pp
-.Dl "burncd -f /dev/acd0c data file1 audio file2 file3 fixate"
-.Pp
-The typical usage for burning from a compressed image file on stdin:
-.Pp
-.Dl "gunzip -c file.iso.gz | burncd -f /dev/acd0c data - fixate"
-.Pp
-In the examples above, the files burned to data CD-Rs are assumed to
-be ISO9660 file systems.
-.Xr mkisofs 8 ,
-available in the
-.Xr pkgsrc 7
-collection, is commonly used to create ISO9660 file system images
-from a given directory tree.
-.Sh HISTORY
-The
-.Nm
-utility appeared in
-.Fx 4.0 .
-.Sh AUTHORS
-The
-.Nm
-utility and this manpage was contributed by
-.An S\(/oren Schmidt ,
-Denmark
-.Aq sos@FreeBSD.org .
-.Sh BUGS
-Probably, please report when found.
+++ /dev/null
-/*-
- * Copyright (c) 2000,2001,2002 Søren Schmidt <sos@freebsd.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer,
- * without modification, immediately at the beginning of the file.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * $FreeBSD: src/usr.sbin/burncd/burncd.c,v 1.10.2.6 2002/11/20 00:26:18 njl Exp $
- * $DragonFly: src/usr.sbin/burncd/burncd.c,v 1.4 2008/06/05 18:06:33 swildner Exp $
- */
-
-#include <unistd.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <err.h>
-#include <sysexits.h>
-#include <fcntl.h>
-#include <sys/errno.h>
-#include <sys/ioctl.h>
-#include <sys/stat.h>
-#include <sys/cdio.h>
-#include <sys/cdrio.h>
-#include <sys/param.h>
-
-#define BLOCKS 16
-
-struct track_info {
- int file;
- char *file_name;
- u_int file_size;
- int block_size;
- int block_type;
- int pregap;
- int addr;
-};
-static struct track_info tracks[100];
-static int fd, quiet, verbose, saved_block_size, notracks;
-
-void add_track(char *, int, int, int);
-void do_DAO(int, int);
-void do_TAO(int, int);
-int write_file(struct track_info *);
-int roundup_blocks(struct track_info *);
-void cue_ent(struct cdr_cue_entry *, int, int, int, int, int, int, int);
-void cleanup(int);
-void usage(void);
-
-int
-main(int argc, char **argv)
-{
- int ch, arg, addr;
- int dao = 0, eject = 0, fixate = 0, list = 0, multi = 0, preemp = 0;
- int nogap = 0, speed = 4 * 177, test_write = 0;
- int block_size = 0, block_type = 0, cdopen = 0;
- const char *dev = "/dev/acd0c";
-
- while ((ch = getopt(argc, argv, "def:lmnpqs:tv")) != -1) {
- switch (ch) {
- case 'd':
- dao = 1;
- break;
-
- case 'e':
- eject = 1;
- break;
-
- case 'f':
- dev = optarg;
- break;
-
- case 'l':
- list = 1;
- break;
-
- case 'm':
- multi = 1;
- break;
-
- case 'n':
- nogap = 1;
- break;
-
- case 'p':
- preemp = 1;
- break;
-
- case 'q':
- quiet = 1;
- break;
-
- case 's':
- if (strcasecmp("max", optarg) == 0)
- speed = CDR_MAX_SPEED;
- else
- speed = atoi(optarg) * 177;
- if (speed <= 0)
- errx(EX_USAGE, "Invalid speed: %s", optarg);
- break;
-
- case 't':
- test_write = 1;
- break;
-
- case 'v':
- verbose = 1;
- break;
-
- default:
- usage();
- }
- }
- argc -= optind;
- argv += optind;
-
- if (argc == 0)
- usage();
-
- if ((fd = open(dev, O_RDWR, 0)) < 0)
- err(EX_NOINPUT, "open(%s)", dev);
-
- if (ioctl(fd, CDRIOCGETBLOCKSIZE, &saved_block_size) < 0)
- err(EX_IOERR, "ioctl(CDRIOCGETBLOCKSIZE)");
-
- if (ioctl(fd, CDRIOCWRITESPEED, &speed) < 0)
- err(EX_IOERR, "ioctl(CDRIOCWRITESPEED)");
-
- err_set_exit(cleanup);
-
- for (arg = 0; arg < argc; arg++) {
- if (!strcasecmp(argv[arg], "fixate")) {
- fixate = 1;
- break;
- }
- if (!strcasecmp(argv[arg], "msinfo")) {
- struct ioc_read_toc_single_entry entry;
- struct ioc_toc_header header;
-
- if (ioctl(fd, CDIOREADTOCHEADER, &header) < 0)
- err(EX_IOERR, "ioctl(CDIOREADTOCHEADER)");
- bzero(&entry, sizeof(struct ioc_read_toc_single_entry));
- entry.address_format = CD_LBA_FORMAT;
- entry.track = header.ending_track;
- if (ioctl(fd, CDIOREADTOCENTRY, &entry) < 0)
- err(EX_IOERR, "ioctl(CDIOREADTOCENTRY)");
- if (ioctl(fd, CDRIOCNEXTWRITEABLEADDR, &addr) < 0)
- err(EX_IOERR, "ioctl(CDRIOCNEXTWRITEABLEADDR)");
- fprintf(stdout, "%d,%d\n",
- ntohl(entry.entry.addr.lba), addr);
-
- break;
- }
- if (!strcasecmp(argv[arg], "erase") || !strcasecmp(argv[arg], "blank")){
- int error, blank, percent;
-
- if (!strcasecmp(argv[arg], "erase"))
- blank = CDR_B_ALL;
- else
- blank = CDR_B_MIN;
- if (!quiet)
- fprintf(stderr, "%sing CD, please wait..\r",
- blank == CDR_B_ALL ? "eras" : "blank");
-
- if (ioctl(fd, CDRIOCBLANK, &blank) < 0)
- err(EX_IOERR, "ioctl(CDRIOCBLANK)");
- while (1) {
- sleep(1);
- error = ioctl(fd, CDRIOCGETPROGRESS, &percent);
- if (percent > 0 && !quiet)
- fprintf(stderr,
- "%sing CD - %d %% done \r",
- blank == CDR_B_ALL ?
- "eras" : "blank", percent);
- if (error || percent == 100)
- break;
- }
- if (!quiet)
- printf("\n");
- continue;
- }
- if (!strcasecmp(argv[arg], "audio") || !strcasecmp(argv[arg], "raw")) {
- block_type = CDR_DB_RAW;
- block_size = 2352;
- continue;
- }
- if (!strcasecmp(argv[arg], "data") || !strcasecmp(argv[arg], "mode1")) {
- block_type = CDR_DB_ROM_MODE1;
- block_size = 2048;
- continue;
- }
- if (!strcasecmp(argv[arg], "mode2")) {
- block_type = CDR_DB_ROM_MODE2;
- block_size = 2336;
- continue;
- }
- if (!strcasecmp(argv[arg], "xamode1")) {
- block_type = CDR_DB_XA_MODE1;
- block_size = 2048;
- continue;
- }
- if (!strcasecmp(argv[arg], "xamode2")) {
- block_type = CDR_DB_XA_MODE2_F2;
- block_size = 2324;
- continue;
- }
- if (!strcasecmp(argv[arg], "vcd")) {
- block_type = CDR_DB_XA_MODE2_F2;
- block_size = 2352;
- dao = 1;
- nogap = 1;
- continue;
- }
- if (!block_size)
- errx(EX_NOINPUT, "no data format selected");
- if (list) {
- char file_buf[MAXPATHLEN + 1], *eol;
- FILE *fp;
-
- if ((fp = fopen(argv[arg], "r")) == NULL)
- err(EX_NOINPUT, "fopen(%s)", argv[arg]);
-
- while (fgets(file_buf, sizeof(file_buf), fp) != NULL) {
- if (*file_buf == '#' || *file_buf == '\n')
- continue;
- if ((eol = strchr(file_buf, '\n')))
- *eol = 0;
- add_track(file_buf, block_size, block_type, nogap);
- }
- if (feof(fp))
- fclose(fp);
- else
- err(EX_IOERR, "fgets(%s)", file_buf);
- }
- else
- add_track(argv[arg], block_size, block_type, nogap);
- }
- if (notracks) {
- if (ioctl(fd, CDIOCSTART, 0) < 0)
- err(EX_IOERR, "ioctl(CDIOCSTART)");
- if (!cdopen) {
- if (ioctl(fd, CDRIOCINITWRITER, &test_write) < 0)
- err(EX_IOERR, "ioctl(CDRIOCINITWRITER)");
- cdopen = 1;
- }
- if (dao)
- do_DAO(test_write, multi);
- else
- do_TAO(test_write, preemp);
- }
- if (fixate && !dao) {
- if (!quiet)
- fprintf(stderr, "fixating CD, please wait..\n");
- if (ioctl(fd, CDRIOCFIXATE, &multi) < 0)
- err(EX_IOERR, "ioctl(CDRIOCFIXATE)");
- }
-
- if (ioctl(fd, CDRIOCSETBLOCKSIZE, &saved_block_size) < 0) {
- err_set_exit(NULL);
- err(EX_IOERR, "ioctl(CDRIOCSETBLOCKSIZE)");
- }
-
- if (eject)
- if (ioctl(fd, CDIOCEJECT) < 0)
- err(EX_IOERR, "ioctl(CDIOCEJECT)");
- close(fd);
- exit(EX_OK);
-}
-
-void
-add_track(char *name, int block_size, int block_type, int nogap)
-{
- struct stat sb;
- int file;
- static int done_stdin = 0;
-
- if (!strcmp(name, "-")) {
- if (done_stdin) {
- warn("skipping multiple usages of stdin");
- return;
- }
- file = STDIN_FILENO;
- done_stdin = 1;
- }
- else if ((file = open(name, O_RDONLY, 0)) < 0)
- err(EX_NOINPUT, "open(%s)", name);
- if (fstat(file, &sb) < 0)
- err(EX_IOERR, "fstat(%s)", name);
- tracks[notracks].file = file;
- tracks[notracks].file_name = name;
- if (file == STDIN_FILENO)
- tracks[notracks].file_size = -1;
- else
- tracks[notracks].file_size = sb.st_size;
- tracks[notracks].block_size = block_size;
- tracks[notracks].block_type = block_type;
-
- if (nogap && notracks)
- tracks[notracks].pregap = 0;
- else {
- if (tracks[notracks - (notracks > 0)].block_type == block_type)
- tracks[notracks].pregap = 150;
- else
- tracks[notracks].pregap = 255;
- }
-
- if (verbose) {
- int pad = 0;
-
- if (tracks[notracks].file_size / tracks[notracks].block_size !=
- roundup_blocks(&tracks[notracks]))
- pad = 1;
- fprintf(stderr,
- "adding type 0x%02x file %s size %d KB %d blocks %s\n",
- tracks[notracks].block_type, name, (int)sb.st_size/1024,
- roundup_blocks(&tracks[notracks]),
- pad ? "(0 padded)" : "");
- }
- notracks++;
-}
-
-void
-do_DAO(int test_write, int multi)
-{
- struct cdr_cuesheet sheet;
- struct cdr_cue_entry cue[100];
- int format = CDR_SESS_CDROM;
- int addr, i, j = 0;
-
- int bt2ctl[16] = { 0x0, -1, -1, -1, -1, -1, -1, -1,
- 0x4, 0x4, 0x4, 0x4, 0x4, 0x4, -1, -1 };
-
- int bt2df[16] = { 0x0, -1, -1, -1, -1, -1, -1, -1,
- 0x10, 0x30, 0x20, -1, 0x21, -1, -1, -1 };
-
- if (ioctl(fd, CDRIOCNEXTWRITEABLEADDR, &addr) < 0)
- err(EX_IOERR, "ioctl(CDRIOCNEXTWRITEABLEADDR)");
- if (verbose)
- fprintf(stderr, "next writeable LBA %d\n", addr);
-
- cue_ent(&cue[j++], bt2ctl[tracks[0].block_type], 0x01, 0x00, 0x0,
- (bt2df[tracks[0].block_type] & 0xf0) |
- (tracks[0].block_type < 8 ? 0x01 : 0x04), 0x00, addr);
-
- for (i = 0; i < notracks; i++) {
- if (bt2ctl[tracks[i].block_type] < 0 ||
- bt2df[tracks[i].block_type] < 0)
- err(EX_IOERR, "track type not supported in DAO mode");
-
- if (tracks[i].block_type >= CDR_DB_XA_MODE1)
- format = CDR_SESS_CDROM_XA;
-
- if (i == 0) {
- addr += tracks[i].pregap;
- tracks[i].addr = addr;
-
- cue_ent(&cue[j++], bt2ctl[tracks[i].block_type],
- 0x01, i+1, 0x1, bt2df[tracks[i].block_type],
- 0x00, addr);
-
- }
- else {
- if (tracks[i].pregap) {
- if (tracks[i].block_type > 0x7) {
- cue_ent(&cue[j++],bt2ctl[tracks[i].block_type],
- 0x01, i+1, 0x0,
- (bt2df[tracks[i].block_type] & 0xf0) |
- (tracks[i].block_type < 8 ? 0x01 :0x04),
- 0x00, addr);
- }
- else
- cue_ent(&cue[j++],bt2ctl[tracks[i].block_type],
- 0x01, i+1, 0x0,
- bt2df[tracks[i].block_type],
- 0x00, addr);
- }
- tracks[i].addr = tracks[i - 1].addr +
- roundup_blocks(&tracks[i - 1]);
-
- cue_ent(&cue[j++], bt2ctl[tracks[i].block_type],
- 0x01, i+1, 0x1, bt2df[tracks[i].block_type],
- 0x00, addr + tracks[i].pregap);
-
- if (tracks[i].block_type > 0x7)
- addr += tracks[i].pregap;
- }
- addr += roundup_blocks(&tracks[i]);
- }
-
- cue_ent(&cue[j++], bt2ctl[tracks[i - 1].block_type], 0x01, 0xaa, 0x01,
- (bt2df[tracks[i - 1].block_type] & 0xf0) |
- (tracks[i - 1].block_type < 8 ? 0x01 : 0x04), 0x00, addr);
-
- sheet.len = j * 8;
- sheet.entries = cue;
- sheet.test_write = test_write;
- sheet.session_type = multi ? CDR_SESS_MULTI : CDR_SESS_NONE;
- sheet.session_format = format;
- if (verbose) {
- u_int8_t *ptr = (u_int8_t *)sheet.entries;
-
- fprintf(stderr,"CUE sheet:");
- for (i = 0; i < sheet.len; i++)
- if (i % 8)
- fprintf(stderr," %02x", ptr[i]);
- else
- fprintf(stderr,"\n%02x", ptr[i]);
- fprintf(stderr,"\n");
- }
-
- if (ioctl(fd, CDRIOCSENDCUE, &sheet) < 0)
- err(EX_IOERR, "ioctl(CDRIOCSENDCUE)");
-
- for (i = 0; i < notracks; i++) {
- if (write_file(&tracks[i]))
- err(EX_IOERR, "write_file");
- }
-
- ioctl(fd, CDRIOCFLUSH);
-}
-
-void
-do_TAO(int test_write, int preemp)
-{
- struct cdr_track track;
- int i;
-
- for (i = 0; i < notracks; i++) {
- track.test_write = test_write;
- track.datablock_type = tracks[i].block_type;
- track.preemp = preemp;
- if (ioctl(fd, CDRIOCINITTRACK, &track) < 0)
- err(EX_IOERR, "ioctl(CDRIOCINITTRACK)");
-
- if (ioctl(fd, CDRIOCNEXTWRITEABLEADDR, &tracks[i].addr) < 0)
- err(EX_IOERR, "ioctl(CDRIOCNEXTWRITEABLEADDR)");
- if (!quiet)
- fprintf(stderr, "next writeable LBA %d\n",
- tracks[i].addr);
- if (write_file(&tracks[i]))
- err(EX_IOERR, "write_file");
- if (ioctl(fd, CDRIOCFLUSH) < 0)
- err(EX_IOERR, "ioctl(CDRIOCFLUSH)");
- }
-}
-
-int
-write_file(struct track_info *track_info)
-{
- int size, count, filesize;
- char buf[2352*BLOCKS];
- static int tot_size = 0;
-
- filesize = track_info->file_size / 1024;
-
- if (ioctl(fd, CDRIOCSETBLOCKSIZE, &track_info->block_size) < 0)
- err(EX_IOERR, "ioctl(CDRIOCSETBLOCKSIZE)");
-
- if (track_info->addr >= 0)
- lseek(fd, track_info->addr * track_info->block_size, SEEK_SET);
-
- if (verbose)
- fprintf(stderr, "addr = %d size = %d blocks = %d\n",
- track_info->addr, track_info->file_size,
- roundup_blocks(track_info));
-
- if (!quiet) {
- if (track_info->file == STDIN_FILENO)
- fprintf(stderr, "writing from stdin\n");
- else
- fprintf(stderr,
- "writing from file %s size %d KB\n",
- track_info->file_name, filesize);
- }
- size = 0;
-
- while ((count = read(track_info->file, buf,
- MIN((track_info->file_size - size),
- track_info->block_size * BLOCKS))) > 0) {
- int res;
-
- if (count % track_info->block_size) {
- /* pad file to % block_size */
- bzero(&buf[count],
- (track_info->block_size * BLOCKS) - count);
- count = ((count / track_info->block_size) + 1) *
- track_info->block_size;
- }
- if ((res = write(fd, buf, count)) != count) {
- fprintf(stderr, "\nonly wrote %d of %d bytes err=%d\n",
- res, count, errno);
- break;
- }
- size += count;
- tot_size += count;
- if (!quiet) {
- int pct;
-
- fprintf(stderr, "written this track %d KB", size/1024);
- if (track_info->file != STDIN_FILENO && filesize) {
- pct = (size / 1024) * 100 / filesize;
- fprintf(stderr, " (%d%%)", pct);
- }
- fprintf(stderr, " total %d KB\r", tot_size/1024);
- }
- if (size >= track_info->file_size)
- break;
- }
-
- if (!quiet)
- fprintf(stderr, "\n");
- close(track_info->file);
- return 0;
-}
-
-int
-roundup_blocks(struct track_info *track)
-{
- return ((track->file_size + track->block_size - 1) / track->block_size);
-}
-
-void
-cue_ent(struct cdr_cue_entry *cue, int ctl, int adr, int track, int idx,
- int dataform, int scms, int lba)
-{
- cue->adr = adr;
- cue->ctl = ctl;
- cue->track = track;
- cue->index = idx;
- cue->dataform = dataform;
- cue->scms = scms;
- lba += 150;
- cue->min = lba / (60*75);
- cue->sec = (lba % (60*75)) / 75;
- cue->frame = (lba % (60*75)) % 75;
-}
-
-void
-cleanup(int dummy __unused)
-{
- if (ioctl(fd, CDRIOCSETBLOCKSIZE, &saved_block_size) < 0)
- err(EX_IOERR, "ioctl(CDRIOCSETBLOCKSIZE)");
-}
-
-void
-usage(void)
-{
- fprintf(stderr,
- "Usage: %s [-delmnpqtv] [-f device] [-s speed] [command]"
- " [command file ...]\n", getprogname());
- exit(EX_USAGE);
-}
projects / dragonfly.git / commitdiff