msk(4): Disable ASF on the chips that have it
[dragonfly.git] / sys / dev / netif / msk / if_msk.c
2011-08-15 Sepherosa Ziehaumsk(4): Disable ASF on the chips that have it
2011-08-15 Sepherosa Ziehaumsk(4): Make sure to enable all clocks before accessing...
2011-08-14 Sepherosa Ziehaumsk(4): Only Yukon FE, XL and EC have RAM registers
2011-08-14 Sepherosa Ziehaumsk(4): Enable store and forward mode except for jumbo...
2011-08-14 Sepherosa Ziehaumsk(4): Do not blindly clear entire GPHY control register.
2011-08-14 Sepherosa Ziehaumsk(4): Don't process incoming packets if the interface...
2011-08-14 Sepherosa Ziehaumsk(4): Don't unnecessarily clear interrupt masks
2011-08-10 Sepherosa Ziehaumsk(4): Add support for 88E8059
2011-08-10 Sepherosa Ziehaumsk(4): Disable non-ASF packet flushing on Yukon Extreme.
2011-08-10 Sepherosa Ziehaumsk(4): RX_GMF_{LP,UP}_THR are 16bits registers
2011-08-10 Sepherosa Ziehaumsk(4): PCI_OUR_REG_* and PCI_CFG_REG_* should be acces...
2011-08-10 Sepherosa Ziehaumsk(4): Enable flow-control only if link is full-duplex
2011-08-10 Sepherosa Ziehaumsk(4): Don't hardcod register offset to set PCIe max...
2011-08-10 Sepherosa Ziehaumsk(4): Add support for 88E8057
2011-08-10 Sepherosa Ziehaumsk(4): Force link state detection, if link is not up.
2011-08-02 Sepherosa Ziehaumsk(4): Recognize 88E8402
2011-08-02 Sepherosa Ziehaumsk(4): Remove "FIFO overrun" debug logging, which...
2011-08-02 Sepherosa Ziehaumsk(4): Yukon XL can't flush FIFO
2011-08-01 Sepherosa Ziehaumsk(4): Add Yukon Extreme support
2011-07-31 Sepherosa Ziehaumsk(4): 88E80{35,36,37,38} are 100baseT only
2011-07-31 Sepherosa Ziehaumsk(4): Add Yukon FE+ support
2011-07-31 Sepherosa Ziehaumsk(4): Explicitly reset GMAC Controls and clear GM_GP_CTRL
2011-07-31 Sepherosa Ziehaumsk(4): Disable HW WOL for Yukon EC Ultra
2011-07-31 Sepherosa Ziehaumsk(4): If link is down, don't disable RX/TX MACs if...
2011-07-31 Sepherosa Ziehaumsk(4): Fix link status detection
2011-07-31 Sepherosa Ziehaumsk(4): Add flag to mark the controller is 100baseTX...
2011-07-31 Sepherosa Ziehaumsk(4): Unify PROMISC and ALLMULTI settings
2011-07-11 Sepherosa Ziehaumsk(4): Pass through mii_mediachg() return value
2011-07-11 Sepherosa Ziehaumsk(4): Align RX buffer on 8bytes for hardware w/ ram...
2011-07-11 Sepherosa Ziehaumsk(4): Workaround GMAC hardware hang of Yukon II on...
2011-06-24 Sascha Wildnerkernel: Use NULL for DRIVER_MODULE()'s evh ...
2010-08-29 Matthew Dillonkernel - gcc -Os/-O2 warnings pass
2010-06-12 Sascha Wildnernetwork code: Convert if_multiaddrs from LIST to TAILQ.
2009-03-21 Sepherosa Ziehauether_input/rss: Pass packet info to ether_input_chain.
2009-02-17 Sepherosa Ziehaumsk(4): Align TX buffer to 64bytes boundary instead...
2009-02-17 Sepherosa Ziehaumsk(4): Align TX buffer to 8bytes boundary to improve...
2009-02-17 Sepherosa Ziehaumsk(4): Avoid busdma map leakage on error handling...
2009-02-17 Sepherosa Ziehaumsk(4): Adjust TX path
2009-02-17 Sepherosa Ziehaumsk(4): Utilize bus_dmamap_load_mbuf_segment()
2009-02-17 Sepherosa Ziehaumsk(4): Utilize bus_dmamem_coherent() and don't sync...
2009-02-17 Sepherosa Ziehaumsk(4): Correct parameters passed to busdma(9) functions
2008-11-23 Sepherosa ZiehauSave the value read from TX queue CSR, so we don't...
2008-09-17 Sepherosa ZiehauAlways enable ETHER_INPUT_CHAIN support
2008-09-17 Sepherosa ZiehauRemove the '2' suffix from ether_input_chain and vlan_i...
2008-08-03 Sepherosa ZiehauPromote sysctl_int_range()
2008-07-27 Sepherosa ZiehauSwitch to ETHER_INPUT2 on ethernet input path by default:
2008-06-26 Sepherosa ZiehauMake msk(4) aware ETHER_INPUT_CHAIN and ETHER_INPUT2
2008-05-14 Sepherosa ZiehauReduce ifnet.if_serializer contention on output path:
2008-03-23 Sepherosa ZiehauNuke debug prints.
2008-03-22 Sepherosa Ziehau- Set number of TX descriptors to 512.
2007-12-26 Sepherosa ZiehauImport msk(4) which supports Marvell Yukon II based...