dragonfly.git
11 years agoDon't write errno to the GOT, but properly follow the indirection
Simon Schubert [Sat, 19 Jan 2008 13:30:51 +0000 (13:30 +0000)]
Don't write errno to the GOT, but properly follow the indirection

This only applies to PIC objects without TLS support, i.e. rtld.
This was broken since long but didn't get caught, because rtld is the
only consumer of this configuration and doesn't deal with errno a lot.

Noticed-by: godlkwrth on IRC while porting WINE
11 years agoUse correct register
Simon Schubert [Sat, 19 Jan 2008 13:27:02 +0000 (13:27 +0000)]
Use correct register

11 years ago- Don't set hardware slot time according to "short slot time" capability
Sepherosa Ziehau [Sat, 19 Jan 2008 10:08:52 +0000 (10:08 +0000)]
- Don't set hardware slot time according to "short slot time" capability
  in various management frames from AP.  2560 part seems to have trouble
  to acknowledge frames sent at CCK/DS rates by certain APs (e.g. Linksys)
  Add comment about it.
- 54/48/36/24Mb should use 24Mb as acknowledge rate.  18/12Mb should use
  12Mb as acknowledge rate.  9/6Mb should use 6Mb as acknowledge rate.
  Adjust register values accordingly (infered from Ralink RT2500 comment).

# With this commit (properly ack frames sent at CCK/DS rates) and by setting
# txpower to 70 (avoid excessive retry at 48Mb and 54Mb), ASUS WL-107g now
# works quite well with the Linksys AP (WRT54G, with the default firmware).

11 years agoRemove some unnecessary initialization.
Sascha Wildner [Sat, 19 Jan 2008 08:50:12 +0000 (08:50 +0000)]
Remove some unnecessary initialization.

11 years agoAdd a manual page for contigmalloc() and contigfree().
Sascha Wildner [Sat, 19 Jan 2008 08:23:17 +0000 (08:23 +0000)]
Add a manual page for contigmalloc() and contigfree().

Taken from FreeBSD with some adjustments and a few lines about
M_WAITOK behavior.

Reviewed-by: sephe
11 years ago- Capabilities information field is 2bytes long. Mark old sta info
Sepherosa Ziehau [Sat, 19 Jan 2008 07:34:13 +0000 (07:34 +0000)]
- Capabilities information field is 2bytes long.  Mark old sta info
  structure's capinfo as deprecated.  Add new field in sta info to
  deliver capabilities information to userland applications.
- Update ifconfig(8)

11 years ago- Capabilities information field is 2bytes long. Mark old scan result
Sepherosa Ziehau [Sat, 19 Jan 2008 07:03:55 +0000 (07:03 +0000)]
- Capabilities information field is 2bytes long.  Mark old scan result
  structure's capinfo as deprecated.  Use padding field in scan result
  to deliver capabilities information.
- Update ifconfig(8) and wpa_supplicant(8) accordingly

11 years agogbk.5 was added by mistake.
Sascha Wildner [Fri, 18 Jan 2008 20:49:59 +0000 (20:49 +0000)]
gbk.5 was added by mistake.

11 years agoFix time conversion bugs in the stamp command.
Matthew Dillon [Fri, 18 Jan 2008 19:38:29 +0000 (19:38 +0000)]
Fix time conversion bugs in the stamp command.

Submitted-by: YONETANI Tomokazu <qhwt+dfly@les.ath.cx>
11 years agoFix an issue with cache_rename(). This procedure previously copied a
Matthew Dillon [Fri, 18 Jan 2008 19:13:16 +0000 (19:13 +0000)]
Fix an issue with cache_rename().  This procedure previously copied a
namecache entry to a new one and then invalidated the old one, operating
under the idea that the namespace structures should remain consistent.
However, the curret, root, and jail directories for a process are stored as
pointers to namecache structures and renaming a directory resulted in
the current, root, or jail directory for related processes becoming invalid.

Changes to the namecache structure over the years (separately allocated
nc_name, rehash support, etc) now make it possible to implement the
cache_rename() by physically renaming the namecache structure instead
of copying it, allowing process references to be retained.

NOTE: There may still be a race against nlookup's.

Reported-by: Vincent Stemen <vs1@crel.us>
Testing-by: Vincent Stemen <vs1@crel.us>
11 years agoAdd hammer_recover.c for kernel builds w/ HAMMER.
Matthew Dillon [Fri, 18 Jan 2008 19:06:29 +0000 (19:06 +0000)]
Add hammer_recover.c for kernel builds w/ HAMMER.

11 years agoFix a bug preventing burncd(8) from dispaying the progress of CD-RW (maybe
Matthias Schmidt [Fri, 18 Jan 2008 13:53:46 +0000 (13:53 +0000)]
Fix a bug preventing burncd(8) from dispaying the progress of CD-RW (maybe
more operations) blanking/erasing.  Originally from FreeBSD.

Before:
# burncd -f /dev/acd0 erase
erasing CD (stalls here and you can't see any progress)

After:
# burncd -f /dev/acd0 erase
erasing CD - xx % done

11 years agoHAMMER 21/many: B-Tree node locking finalization.
Matthew Dillon [Fri, 18 Jan 2008 07:02:41 +0000 (07:02 +0000)]
HAMMER 21/many: B-Tree node locking finalization.

* Implement the final locking scheme for B-Tree nodes.  Use shared locks
  for all searches, upgrade to exclusive locks for modifications.  If
  unable to upgrade fall through with an EDEADLK error code and retry the
  operation after releasing all other locks and blocking on the lock that
  could not be obtained.

  Simple iterations never fail and do not need to handle an EDEADLK error
  code.

  Because EDEADLK can actually occur quite often the error paths for most
  code modules will begin to get some exercise, which is good for code
  stability.

  It is possible to cache cursor positions closer to the desired target
  to reduce re-lookup times but I don't try to do this yet.

* Finalize code for basic (unbalanced) deletions.   Neither leaf nor internal
  nodes are allowed to be empty any more (except at the root of a cluster),
  but recursive deletions may deadlock while going up the tree and leave
  an internal node with a zero'd out element.   The search and iteration
  code now properly detects such elements and finishes off the deletion,
  though a complete cleaning will be left up to the balancing module.

* Remove most instances of recursively instantiated cursors.  There is still
  one left in the directory deletion code.

* Remove all remaining unprotected cursor transitions (where locks had to be
  released to avoid deadlocks).

11 years agoNuke staled code
Sepherosa Ziehau [Fri, 18 Jan 2008 03:58:05 +0000 (03:58 +0000)]
Nuke staled code

11 years ago- Extract RX sensitivity calibration capability from EEPROM
Sepherosa Ziehau [Fri, 18 Jan 2008 03:52:02 +0000 (03:52 +0000)]
- Extract RX sensitivity calibration capability from EEPROM
- Skip invalid BBP register/value entries extracted from EEPROM
- More debug messages

11 years ago- If channel TX power from EEPROM is above 32, set it to 24
Sepherosa Ziehau [Fri, 18 Jan 2008 02:15:43 +0000 (02:15 +0000)]
- If channel TX power from EEPROM is above 32, set it to 24
- Rename rt2560_read_eeprom() to rt2560_read_config()

11 years agoFix EEPROM channel TX power parsing.
Sepherosa Ziehau [Fri, 18 Jan 2008 01:43:07 +0000 (01:43 +0000)]
Fix EEPROM channel TX power parsing.

Based-on: Ralink RT2500

11 years agoAdd some words about /usr/share/i18n and /usr/share/openssl/man.
Sascha Wildner [Thu, 17 Jan 2008 23:02:40 +0000 (23:02 +0000)]
Add some words about /usr/share/i18n and /usr/share/openssl/man.

11 years agoAdd TX power compensation support in TX power calibration.
Sepherosa Ziehau [Thu, 17 Jan 2008 13:33:11 +0000 (13:33 +0000)]
Add TX power compensation support in TX power calibration.
EEPROM layout for TSSI is obtained from Ralink RT61

11 years agoRemove tcsh emacs script which is obsolete due to the latest tcsh import.
Matthias Schmidt [Thu, 17 Jan 2008 12:51:22 +0000 (12:51 +0000)]
Remove tcsh emacs script which is obsolete due to the latest tcsh import.

Reminded-by: swildner@
11 years agoAdd RX sensitivity calibration according to false CCA at relative long distance.
Sepherosa Ziehau [Thu, 17 Jan 2008 08:56:14 +0000 (08:56 +0000)]
Add RX sensitivity calibration according to false CCA at relative long distance.

RX sensitivity adjustment step and two false CCA thresholds are according to
Ralink RT61, though they adjust RX sensitivity in the wrong direction.

# For my EW-7608PG
# without RX sensitivity calibration, false CCA is ~1200
# with RX sensitivity calibration, false CCA is 0 for most of the time

11 years agountabify
Sascha Wildner [Thu, 17 Jan 2008 07:39:00 +0000 (07:39 +0000)]
untabify

11 years ago- Add auto TX power and RX sensitivity calibration support. Add two sysctl
Sepherosa Ziehau [Thu, 17 Jan 2008 07:35:38 +0000 (07:35 +0000)]
- Add auto TX power and RX sensitivity calibration support.  Add two sysctl
  nodes to enable/disable them.  Calibration is only done when NIC operates
  as STA, since it does not make sense when the NIC operates in other mode.
  By default, they are all disabled.
- Add sysctl node for TX power correction.  TX power correction is disabled
  by default.  This could be used when TX power calibration should not be
  performed, e.g. when NIC operates as AP

Enable TX power and RX sensitivity calibration and set TX power correction
to 8 (-4db) makes my EW-7608PG work well @48Mb and @54Mb when it is near AP
(-44dbm ~ -58dbm), @54Mb ~50 retries for ~1080 packets.  Originally the NIC
requires at least one retry for every packets @48Mb.

TX power calibration needs further investigation.  Calibrating TX power
based on RSSI may not work weel; integrate it into TX rate control may work
better.

Various limits and correction values are obtained from Ralink RT61 driver.

# TX power stepping for Auto-AGC capable NICs is not in place yet.
# RX sensitivity calibration for long distance is not in place yet.

11 years agoHAMMER utilities:
Matthew Dillon [Thu, 17 Jan 2008 05:14:49 +0000 (05:14 +0000)]
HAMMER utilities:

* Fix missing releases, fix endless loop in cache flush.

11 years agoHAMMER 20B/many: New spike topology, simplify the B-Tree code.
Matthew Dillon [Thu, 17 Jan 2008 05:06:09 +0000 (05:06 +0000)]
HAMMER 20B/many: New spike topology, simplify the B-Tree code.

* Specify a spike as two B-Tree leaf elements instead of one B-Tree
  internal element.  This simplifies boundary corrections when traversing
  through internal nodes.

* Remove subtree_count, which means we don't have to recurse through the
  parent nodes to update it any more.

* Simplify the recursive deletion case.  Neither Leaf or internal nodes
  can be empty.  If unable to remove a node due to a deadlock, simply zero
  out the subtree_offset in the parent (internal) node and deal with it
  later.

* Add some Debugger() shims for deletion cases not yet handled.

11 years agoHAMMER utilities:
Matthew Dillon [Thu, 17 Jan 2008 04:59:50 +0000 (04:59 +0000)]
HAMMER utilities:

* Add a 'show' command to the hammer utility.  This command dumps the B-Tree
  for a HAMMER filesystem, allowing me to see just how bad my spike code
  currently is.

* Remove the ClusterSize global (well, move it to newfs_hammer), the
  hammer utilities pull the cluster size out of the volume header.

* UsingSuperClusters is only used by newfs_hammer.  Super-cluster use
  can be controlled on a volume-by-volume basis so pull the information
  out of the volume header.

11 years agoSync with FreeBSD to get support for SHA256
Matthias Schmidt [Wed, 16 Jan 2008 14:18:57 +0000 (14:18 +0000)]
Sync with FreeBSD to get support for SHA256

11 years agoNuke staled code
Sepherosa Ziehau [Wed, 16 Jan 2008 12:37:55 +0000 (12:37 +0000)]
Nuke staled code

11 years ago- Save two sets of average RSSI for 2529RF
Sepherosa Ziehau [Wed, 16 Jan 2008 12:31:25 +0000 (12:31 +0000)]
- Save two sets of average RSSI for 2529RF
- Extract secondary RSSI connection value from EEPROM

11 years agoUpdate the list of USB device IDs for umass(4) and needed routines.
Matthias Schmidt [Wed, 16 Jan 2008 12:27:49 +0000 (12:27 +0000)]
Update the list of USB device IDs for umass(4) and needed routines.

Reviewed-by: hasso@
Taken-from: FreeBSD

11 years agoUpdate the list of USB device IDs for uscanner(4).
Matthias Schmidt [Wed, 16 Jan 2008 12:25:36 +0000 (12:25 +0000)]
Update the list of USB device IDs for uscanner(4).

Reviewed-by: hasso@
Taken-from: FreeBSD

11 years agoUpdated the list of USB device IDs for uvscom(4).
Matthias Schmidt [Wed, 16 Jan 2008 12:24:31 +0000 (12:24 +0000)]
Updated the list of USB device IDs for uvscom(4).

Reviewed-by: hasso@
Taken-from: FreeBSD

11 years agoUpdated the list of USB device IDs for uvisor(4) and needed routines.
Matthias Schmidt [Wed, 16 Jan 2008 12:23:01 +0000 (12:23 +0000)]
Updated the list of USB device IDs for uvisor(4) and needed routines.

Reviewed-by: hasso@
Taken-from: FreeBSD

11 years agoAdd some more rc vars for Bluetooth to rc.conf and document them.
Sascha Wildner [Wed, 16 Jan 2008 11:33:43 +0000 (11:33 +0000)]
Add some more rc vars for Bluetooth to rc.conf and document them.

11 years agoMention /etc/upgrade
Matthias Schmidt [Wed, 16 Jan 2008 09:28:58 +0000 (09:28 +0000)]
Mention /etc/upgrade

11 years agoHAMMER 20A/many: B-Tree lookup API cleanup, B-Tree changes.
Matthew Dillon [Wed, 16 Jan 2008 01:15:37 +0000 (01:15 +0000)]
HAMMER 20A/many: B-Tree lookup API cleanup, B-Tree changes.

* Abstract the as-of TID in the cursor API to hide the implementation
  details.

* Key off of delete_tid instead of create_tid.

* Deal with a boundary key issue related to as-of lookups.  This issue arises
  when several records which differ only by their create_tid/delete_tid
  reside in different leaf nodes.  For example:

o(10) (delete_tid's listed)
       /    \
      6     16

  If we want to do an as-of lookup of say, (8), the btree scan will dive
  into the left branch and fail to find any elements visible to our as-of
  request.  The element '16' in the right branch, however, is visible
  because it was deleted after the as-of timestamp of 8.

  When this case arises btree_search() now detects that the boundary
  element (10) exactly matches the request except for the delete_tid
  and btree_search() now automatically iterates if an as-of search
  is being executed.

  For non-asof searches, such as insertion searches, the delete_tid is
  treated as an absolute and it is desireable to recurse into the left
  branch and stop there.  If we popped over to the right branch our
  new element (8) would be to the right of our boundary element (10)
  instead of to the left.

* Remove code related to dealing with spike ranges in preparation for
  a major change in the way spikes operate.

11 years agoAdjust for the DragonFly ELF ABI
Simon Schubert [Wed, 16 Jan 2008 01:02:40 +0000 (01:02 +0000)]
Adjust for the DragonFly ELF ABI

11 years agoMention that '_enable' is not needed.
Sascha Wildner [Tue, 15 Jan 2008 21:35:46 +0000 (21:35 +0000)]
Mention that '_enable' is not needed.

11 years ago* Document the valid values for variables of type bool. They is already
Sascha Wildner [Tue, 15 Jan 2008 21:35:09 +0000 (21:35 +0000)]
* Document the valid values for variables of type bool. They is already
  documented in rc.subr(8) but it seems appropriate to add this info
  here, too.

* Mention that '_enable' is not needed.

11 years agoAdd bluetooth files to the 'distribution' target.
Sascha Wildner [Tue, 15 Jan 2008 20:54:02 +0000 (20:54 +0000)]
Add bluetooth files to the 'distribution' target.

11 years agoDefaults for btconfig and sdpd rc.d scripts.
Hasso Tepper [Tue, 15 Jan 2008 19:17:36 +0000 (19:17 +0000)]
Defaults for btconfig and sdpd rc.d scripts.

Reminded-by: swildner@ and matthias@
11 years agoIf make upgrade deletes a file, print its name to stdout.
Matthias Schmidt [Tue, 15 Jan 2008 14:48:47 +0000 (14:48 +0000)]
If make upgrade deletes a file, print its name to stdout.

11 years agoRemove 3rd clause
Matthias Schmidt [Tue, 15 Jan 2008 14:21:00 +0000 (14:21 +0000)]
Remove 3rd clause

11 years agoIncrease size of the umsm(4) buffers and tty(4) input buffer to allow high
Hasso Tepper [Tue, 15 Jan 2008 14:19:11 +0000 (14:19 +0000)]
Increase size of the umsm(4) buffers and tty(4) input buffer to allow high
speed serial devices like HSDPA modems work more reliably.

11 years agoRemove sh.exp.c.patch. The fix is included in version 6.15.00
Matthias Schmidt [Tue, 15 Jan 2008 13:56:18 +0000 (13:56 +0000)]
Remove sh.exp.c.patch.  The fix is included in version 6.15.00

11 years agoSwitch to tcsh 6.15.00
Matthias Schmidt [Tue, 15 Jan 2008 13:54:43 +0000 (13:54 +0000)]
Switch to tcsh 6.15.00

11 years agoAdd checkpoiting support to tcsh
Matthias Schmidt [Tue, 15 Jan 2008 13:50:59 +0000 (13:50 +0000)]
Add checkpoiting support to tcsh

11 years agoAdd our READMEs
Matthias Schmidt [Tue, 15 Jan 2008 13:46:32 +0000 (13:46 +0000)]
Add our READMEs

11 years agoMerge from vendor branch TCSH:
Matthias Schmidt [Tue, 15 Jan 2008 13:41:47 +0000 (13:41 +0000)]
Merge from vendor branch TCSH:
Vendor import of tcsh 6.15.00

11 years agoVendor import of tcsh 6.15.00
Matthias Schmidt [Tue, 15 Jan 2008 13:41:47 +0000 (13:41 +0000)]
Vendor import of tcsh 6.15.00

11 years agoo Prepend output with a <TAB>
Matthias Schmidt [Tue, 15 Jan 2008 12:30:44 +0000 (12:30 +0000)]
o Prepend output with a <TAB>
o Fix typo

11 years agoAdd our register layout changes.
Simon Schubert [Tue, 15 Jan 2008 10:09:29 +0000 (10:09 +0000)]
Add our register layout changes.

11 years agoMore ids.
Sepherosa Ziehau [Tue, 15 Jan 2008 09:45:35 +0000 (09:45 +0000)]
More ids.

Obtained-from: Ralink RT73

11 years ago- Store tx rate control parameters in drivers, so switching between tx rate
Sepherosa Ziehau [Tue, 15 Jan 2008 09:01:13 +0000 (09:01 +0000)]
- Store tx rate control parameters in drivers, so switching between tx rate
  control algorithms will not loose configured values.
- Move tx rate control private structures into its implementation file.

11 years agoHAMMER 19/Many - Cleanup pass, cluster recovery code.
Matthew Dillon [Tue, 15 Jan 2008 06:02:57 +0000 (06:02 +0000)]
HAMMER 19/Many - Cleanup pass, cluster recovery code.

11 years agoSimplify tx rate control for drivers which only support periodic TX
Sepherosa Ziehau [Tue, 15 Jan 2008 03:03:25 +0000 (03:03 +0000)]
Simplify tx rate control for drivers which only support periodic TX
data statistics.

11 years agoUpdate for import
Simon Schubert [Tue, 15 Jan 2008 00:39:15 +0000 (00:39 +0000)]
Update for import

11 years agoMerge from vendor branch GDB:
Simon Schubert [Tue, 15 Jan 2008 00:38:45 +0000 (00:38 +0000)]
Merge from vendor branch GDB:
Import missed files from gdb-6.7.1

11 years agoImport missed files from gdb-6.7.1
Simon Schubert [Tue, 15 Jan 2008 00:38:45 +0000 (00:38 +0000)]
Import missed files from gdb-6.7.1

11 years agoSwitch to gdb-6.7.1
Simon Schubert [Mon, 14 Jan 2008 21:36:39 +0000 (21:36 +0000)]
Switch to gdb-6.7.1

11 years agoAdd our READMEs
Simon Schubert [Mon, 14 Jan 2008 21:27:06 +0000 (21:27 +0000)]
Add our READMEs

11 years agoRemove erroneously imported files
Simon Schubert [Mon, 14 Jan 2008 21:25:33 +0000 (21:25 +0000)]
Remove erroneously imported files

11 years agoCustomize the code to make it compile nicely.
Simon Schubert [Mon, 14 Jan 2008 21:04:52 +0000 (21:04 +0000)]
Customize the code to make it compile nicely.

11 years agoImport a stripped gdb-6.7.1
Simon Schubert [Mon, 14 Jan 2008 21:00:22 +0000 (21:00 +0000)]
Import a stripped gdb-6.7.1

11 years agoMerge from vendor branch GDB:
Simon Schubert [Mon, 14 Jan 2008 21:00:22 +0000 (21:00 +0000)]
Merge from vendor branch GDB:
Import a stripped gdb-6.7.1

11 years agoAdd support for Cisco-Linksys WUSB54GC which has a different vendor ID
Joe Talbott [Mon, 14 Jan 2008 19:27:11 +0000 (19:27 +0000)]
Add support for Cisco-Linksys WUSB54GC which has a different vendor ID
than the Linksys WUSB54GC.

11 years agoAttempt to fix an interrupt recursion which can occur in specific
Matthew Dillon [Mon, 14 Jan 2008 15:27:17 +0000 (15:27 +0000)]
Attempt to fix an interrupt recursion which can occur in specific
situations.  The 'slow' interrupt code schedules an interrupt thread
without holding a critical section in an attempt to allow the thread to
preempt the current thread.  If the thread preempts it can re-arm the
interrupt prior to returning and cause an interrupt recursion to occur
before the interrupt code is able to finish doreti, leading to a stack
overflow.

Since we want to preempt we cannot use a critical section to prevent
the recursion.  Instead, use curthread->td_nest_count to prevent
recursive interrupts while the thread is unprotected by a critical
section.  The same condition will now cause successive interrupts to
be queued and then dispatched synchronously by doreti.

Reported-by: "Simon 'corecode' Schubert" <corecode@fs.ei.tum.de>
11 years agoo Install Makefile_upgrade.inc to /etc/upgrade instead of /var/db.
Matthias Schmidt [Mon, 14 Jan 2008 12:39:27 +0000 (12:39 +0000)]
o Install Makefile_upgrade.inc to /etc/upgrade instead of /var/db.
Requested-by: dillon@
o Install the file really _after_ installworld this time.  Thanks to
  corecode@ for the report.  This unbreaks buildworld
o Add an entry to the mtree file for /etc/upgrade
o Print a short message before deleting files

11 years agoCreate four instead of one devices for vnode disks in /dev. If you use
Matthias Schmidt [Mon, 14 Jan 2008 12:34:44 +0000 (12:34 +0000)]
Create four instead of one devices for vnode disks in /dev.  If you use
vn(4) one entry is not enough in most cases.

11 years agoRemove the entries for the deleted tools.
Matthias Schmidt [Sun, 13 Jan 2008 19:05:27 +0000 (19:05 +0000)]
Remove the entries for the deleted tools.

11 years agoRemove rc/tools/tools/html-mv which is useless.
Matthias Schmidt [Sun, 13 Jan 2008 19:03:08 +0000 (19:03 +0000)]
Remove rc/tools/tools/html-mv which is useless.

11 years agoDelete src/tools/tools/tcl_bmake. We don't have tcl in the source so the
Matthias Schmidt [Sun, 13 Jan 2008 19:01:52 +0000 (19:01 +0000)]
Delete src/tools/tools/tcl_bmake.  We don't have tcl in the source so the
script is useless.

11 years agoNuke src/tools/tools/epfe. The script is useless because we don't have
Matthias Schmidt [Sun, 13 Jan 2008 19:00:33 +0000 (19:00 +0000)]
Nuke src/tools/tools/epfe.  The script is useless because we don't have
a locally installed SGML handbook.  If someone wants to use the tool with
the FreeBSD handbook, the tool remains in the Attic as well as in the
FreeBSD source.

11 years agoAdd a new tool to convert FreeBSD USB device IDs to the format we use
Matthias Schmidt [Sun, 13 Jan 2008 18:21:50 +0000 (18:21 +0000)]
Add a new tool to convert FreeBSD USB device IDs to the format we use
in DragonFly.  This eases the process of getting new IDs from FreeBSD, which
is currently necessary due to the fact that their lists are much longer
than our lists :)

To use the tool you need the usbdevs file from FreeBSD:
http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/usb/usbdevs

usage: ./convert_usb_ids.sh [-d] < FREEBSD-IDs > DFLY-IDs

The tool operates in two modi.  The first one is for umass entries and
converts entries like this

  { USB_VENDOR_ADDONICS2, USB_PRODUCT_ADDONICS2_CABLE_205, RID_WILDCARD,
  UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
  NO_QUIRKS
  },

to

  /* Addonics Cable 205  */
  { .vendor = 0x0bf6, .product = 0xa001, release = WILDCARD_ID,
    .proto  = UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
    .quirks = NO_QUIRKS
  },

Pass -d option to use umass modi.  The second one converts easier
entries:

  {{ USB_VENDOR_ACEECA, USB_PRODUCT_ACEECA_MEZ1000 }, PALM4 },

to

  {{ USB_DEVICE(0x4766, 0x0001) }, PALM4 }, /* Aceeca MEZ1000 RDA  */

NOTE:  Due to some peculiarities of the usbdevs file, it is possible that you
can get duplicate entries or wrong comments.  So make sure that your converted
entry is correct.

11 years agoGC ifdef magic for old gcc version.
Simon Schubert [Sun, 13 Jan 2008 18:02:20 +0000 (18:02 +0000)]
GC ifdef magic for old gcc version.

11 years agohandbook.txt has been removed
Sascha Wildner [Sun, 13 Jan 2008 17:56:03 +0000 (17:56 +0000)]
handbook.txt has been removed

11 years agoNuke remains of recently removed stuff.
Sascha Wildner [Sun, 13 Jan 2008 17:51:36 +0000 (17:51 +0000)]
Nuke remains of recently removed stuff.

11 years agoHuawei UMTS/HSDPA adapetrs are already handled by umsm(4).
Hasso Tepper [Sun, 13 Jan 2008 16:04:02 +0000 (16:04 +0000)]
Huawei UMTS/HSDPA adapetrs are already handled by umsm(4).

11 years agoAdd Makefile_upgrade.inc to the tree. This file contains all files
Matthias Schmidt [Sun, 13 Jan 2008 10:59:31 +0000 (10:59 +0000)]
Add Makefile_upgrade.inc to the tree.  This file contains all files
which are obsolete as of now and can be removed by a 'make upgrade'
run.  This should prevent further polluting of etc/Makefile with
rm -rf $foo statements.

The file is installed by 'make installworld' to ${DESTDIR}/var/db
and gets parsed by 'make upgrade'.  If a user exchanges the two commands
by accident, 'make upgrade' prints a warning and doesn't remove any
files.  The upgrade file itself is removed after a successful run.

11 years agoo Correct quirks entry for a MP3 player
Matthias Schmidt [Sun, 13 Jan 2008 10:05:21 +0000 (10:05 +0000)]
o Correct quirks entry for a MP3 player
o Add new quirk for Netak OnlyDisk drive

Obtained-from: FreeBSD

11 years agoRearrange a bit to avoid duplicate code.
Sascha Wildner [Sun, 13 Jan 2008 08:41:15 +0000 (08:41 +0000)]
Rearrange a bit to avoid duplicate code.

11 years agoSync page with FreeBSD to get mode pages for removable devices.
Matthias Schmidt [Sat, 12 Jan 2008 20:11:53 +0000 (20:11 +0000)]
Sync page with FreeBSD to get mode pages for removable devices.

11 years agoSync the file with FreeBSD to get the latest USB HID usage tables for
Matthias Schmidt [Sat, 12 Jan 2008 20:08:49 +0000 (20:08 +0000)]
Sync the file with FreeBSD to get the latest USB HID usage tables for
usbhid(3).

11 years agoRemove src/share/examples/BSD_daemon containing images/sources for the
Matthias Schmidt [Sat, 12 Jan 2008 19:47:05 +0000 (19:47 +0000)]
Remove src/share/examples/BSD_daemon containing images/sources for the
BSD daemon and FreeBSD CD covers.

11 years agoRemove src/share/examples/worm used to build FreeBSD CDROMs. Its it
Matthias Schmidt [Sat, 12 Jan 2008 19:43:50 +0000 (19:43 +0000)]
Remove src/share/examples/worm used to build FreeBSD CDROMs.  Its it
useless on DragonFly.  Users who want to build their own CDROM can use our
nrelease stuff.

11 years agoRemove src/share/examples/FreeBSD_version which is not really useful on
Matthias Schmidt [Sat, 12 Jan 2008 19:41:00 +0000 (19:41 +0000)]
Remove src/share/examples/FreeBSD_version which is not really useful on
DragonFly.

11 years agoRemove some ancient HTML files and an obsolete copy of 'Theory' (there
Sascha Wildner [Sat, 12 Jan 2008 17:53:16 +0000 (17:53 +0000)]
Remove some ancient HTML files and an obsolete copy of 'Theory' (there
is a newer version in share/zoneinfo).

11 years agoRemove handbook during next make upgrade run.
Matthias Schmidt [Sat, 12 Jan 2008 16:30:47 +0000 (16:30 +0000)]
Remove handbook during next make upgrade run.

11 years agoRemove the SUBDIR line. The last entry was the handbook.
Matthias Schmidt [Sat, 12 Jan 2008 16:25:57 +0000 (16:25 +0000)]
Remove the SUBDIR line.  The last entry was the handbook.

11 years agoRemove the ascii version of the handbook from the base system. This version
Matthias Schmidt [Sat, 12 Jan 2008 16:16:38 +0000 (16:16 +0000)]
Remove the ascii version of the handbook from the base system.  This version
is badly out of date and barely helpful.

OK-by: swildner@
11 years agoClean up etc/mtree a bit:
Sascha Wildner [Sat, 12 Jan 2008 15:47:43 +0000 (15:47 +0000)]
Clean up etc/mtree a bit:

* Remove BSD.release.dist, BSD.x11.dist and BSD.x11-4.dist which are
  unused.

* Untabify the remaining files as per etc/mtree/README.

11 years agoMake sure we really do only the software part if we're dying. Fixes panic
Hasso Tepper [Sat, 12 Jan 2008 12:30:22 +0000 (12:30 +0000)]
Make sure we really do only the software part if we're dying. Fixes panic
while detaching ohci device.

11 years agoMinor fix.
Nicolas Thery [Sat, 12 Jan 2008 08:17:44 +0000 (08:17 +0000)]
Minor fix.

11 years agoUse .Fx and .Dx.
Sascha Wildner [Sat, 12 Jan 2008 07:09:41 +0000 (07:09 +0000)]
Use .Fx and .Dx.

11 years agopoll.h header should define the nfds_t type as required by the SUSv3.
Nuno Antunes [Sat, 12 Jan 2008 06:01:27 +0000 (06:01 +0000)]
poll.h header should define the nfds_t type as required by the SUSv3.

Include the definition in the header and adjust poll(2) prototype.
Update the manpage accordingly.

Obtained from: FreeBSD
Ok by: swildner@

11 years agoAdd support for EVDO/UMTS card found in X61s Thinkpads.
Hasso Tepper [Fri, 11 Jan 2008 19:45:27 +0000 (19:45 +0000)]
Add support for EVDO/UMTS card found in X61s Thinkpads.

11 years agoAdd SparkLan RT2573
Sepherosa Ziehau [Fri, 11 Jan 2008 14:28:59 +0000 (14:28 +0000)]
Add SparkLan RT2573

Obtained-from: OpenBSD via FreeBSD

11 years ago- Fix compiling umsm(4) with UMSM_DEBUG
Hasso Tepper [Fri, 11 Jan 2008 12:25:30 +0000 (12:25 +0000)]
- Fix compiling umsm(4) with UMSM_DEBUG
- Make it attach to individual interfaces, not to the device. All supported
  devices I have seen have more than one ucom(4) device.
- Add support for Huawei Mobile Connect (various models use same id's).

11 years ago- Split if_clone.c out of if.c, license in if.c is attached to if_clone.c
Sepherosa Ziehau [Fri, 11 Jan 2008 11:59:41 +0000 (11:59 +0000)]
- Split if_clone.c out of if.c, license in if.c is attached to if_clone.c
- Split if_clone.h out of if.h and if_var.h, license of if_var.h is attached
  to if_clone.h
- Staticize some variables and function in if_clone.c
- if_clonereq is the only userland visible structure related to this commit;
  it is kept in if.h for now, so userland application won't be aware of this
  commit.  It will be moved to net/if_clone.h

No functional changes.

# if_clone.c is subjected to change to support clone creation with
# additional parameters.

11 years agoDon't supress attach messages from devices other than first one while
Hasso Tepper [Fri, 11 Jan 2008 11:41:50 +0000 (11:41 +0000)]
Don't supress attach messages from devices other than first one while
attaching per interface.