Changed the address of my Harmony fork to github.
[ikiwiki.git] / varialus / index.mdwn
CommitLineData
f66ddf87 1# et
ed370e87 2# Anisoptera
e04d20e7 3*The following is an unpaid personal wiki page. The views and opinions expressed herein do not necessarily reflect those of the DragonFly BSD mascot nor its management.*
5e91eec6 4
c2c5c660 5## Table of Contents
6
71. **Featured**
8
0befd86f 9* Walkthrough of Xfce 4.6 Installation via Custom DVD/IMG Installer
c2c5c660 10
112. **Tidbits**
12
52ea7cc8 13* Shell/Console/Command-Line-Prompt: tcsh/bash, ctrl-d/tab-tab, partial-previous-command-up-key/ctrl-r-partial-previous-command, rehash
14* Package-Management: pkgin/apt-get
15* Administration/root su/sudo/wheel
16* Text-Editor: vi :q!
17* Manual: man man
18* Networking: hosts
19* Power-Down: shutdown -p now
20* File-System: Hammer
21* Operating System: DragonFly BSD
22* Graphical-User-Interface: Xfce
23* Programming: Dissonance/Apache Harmony
24* Programming: Jython/Python
25* Text-Editor: ee/nano
26* Networking: Debian resolv.conf
27
283. **Issues**
c2c5c660 29
30* Disclaimer
31* Default GUI Too Bare
32* Early Keyboard Selection
33* GUI Keyboard Selection
34* Encryption Keyboard Selection
35* Disabled Caps Lock in GUI
36* Random Key for Encrypted Swap
37* Stay Decrypted for Configuration
38* No Confirmation for Decryption
39* Plain Text Password in Install Log
40* USB Installation Media Named Uniquely
41* 3TB+ HD Install
42* Overwrite 3TB+ Partition Table
43* Lackluster Default Shell
44* Wiki Centered Text
45* XOrg Quit Errors
46
52ea7cc8 474. **Workarounds**
c2c5c660 48
49* Enable Caps Lock in GUI
50* Install Non-GUI on 3TB+ Hard Drive
51* Install Xfce 4.6 (Notes)
52* Install Xfce 4.8 (Stub)
53* Install Xfce 4.10 (Stub)
54* Set GUI Keyboard Layout
55
b1839790 565. **Contribute**
6848ea64 57
b1839790 58* Port VirtualBox to DragonFly BSD
59* Port Xfce 4.10 to DragonFly BSD
60* DragonFly BSD Network Shares Walkthrough
61* Port bxpkg to DragonFly BSD
6848ea64 62
5e91eec6 63## Featured
64
c2c5c660 65**Walkthrough of Xfce 4.6 Installation via Custom DVD/IMG Installer**
5e91eec6 66
66660ae6 67There is a new [Xfce based DVD/IMG installer](http://island.quantumachine.net/~swildner/LiveDVD/x86_64/) which is built by [one of](http://leaf.dragonflybsd.org/mailarchive/users/2012-07/msg00123.html) the [DragonFly BSD team members](http://www.dragonflybsd.org/team/). As far as I can tell it is functionally identical to the official GUI installer except that it includes the Xfce 4.6 desktop environment rather than the FVWM window manager. Please help test it out so that we can hopefully get it included in the next stable release!
68
691. Download and extract the [Xfce installer](http://island.quantumachine.net/~swildner/LiveDVD/).
702. If the version of the installer is less than or equal to 20120826-2055, then installing onto a uniprocessor computer may not work.
713. If installng onto a VirtualBox virtual machine, the recommended operating system type is FreeBSD (64 bit).
724. If installing onto a VirtualBox virtual machine, set the hardware clock to UTC time.
735. After starting the computer but before it finishes booting, you will be greeted with the following boot menu.
74
75
76 DragonFly/i386 bootstrap loader, Revision 1.1
77 (s@advancer.yo, Sun Aug 26 21:24:11 CEST 2012)
78 |
79 1. Boot DragonFly [kernel] | ,--, | ,--,
80 2. Boot DragonFly in Safe Mode | | `-, ,^, ,-' |
81 3. Boot DragonFly without AHCI driver | `, `-, (/ \) ,-' ,'
82 4. Boot DragonFly without ACPI driver | `-, `-,/ \,-' ,-'
83 9. Escape to loader prompt (also ESC) | `------( )------'
84 s. Boot DragonFly in single user mode | ,----------( )----------,
85 v. Boot DragonFly with verbose logging | | _,-( )-,_ |
86 R. Reboot | `-,__,-' \ / `-,__,-'
87 | | |
88 | | |
89 | | |
90 | | |
91 | | |
92 | | |
93 | `|'
94 |
95 Booting in 10 seconds... _
96
976. After the computer finishes booting, you will be greeted with the following welcome message and login prompt.
98
99 Welcome to DragonFly!
100
101 To Start the installer, login as 'installer'. To just get a shell prompt,
102 login as 'root'. To start a root gui, login as 'root' and run 'startx'.
103
104 DragonFly/x86_64 (dflyd.yo) (ttyv0)
105
106 login: _
107
1087. Type 'installer' without quotes and press enter.
1098. You will be greeted with the following menu.
110
111 F10=Refresh Display .
112 .
113 ,--, | ,--, .
114 ------------------------| Welcome to DragonFly BSD |------------------------- .
115 | |.
116 | Welcome to the DragonFly BSD Live CD. |.
117 | |.
118 | DragonFly BSD is an efficient and elegant BSD Unix-derived operating |.
119 | system. For more information, see http://www.dragonflybsd.org |.
120 | |.
121 | From this CD, you can boot into DragonFly BSD ``live'' (without installing |.
122 | it) to evaluate it, to install it manually, or to troubleshoot problems |.
123 | with an existing installation, using either a command prompt or menu-driven |.
124 | utilities. |.
125 | |.
126 | Also, you can use this automated application to assist you in installing |.
127 | DragonFly BSD on this computer and configuring it once it is installed. |.
128 | |.
129 | < Install DragonFly BSD >_ < Configure an Installed System > |.
130 | < Live CD Utilities > < Exit to Live CD > < Reboot this Computer > |.
131 | < Setup NetBoot Install Services > |.
132 ----------------------------------------------------------------------------- .
133 .
134 .
135 Install DragonFly BSD on a HDD or HDD partition on this computer .
136
13710. The bottom line changes depending on which option is selected.
13811. Highlight the option < Install DragonFly BSD > and press enter.
13912. You will then be greeted by the following menu.
140
141 F10=Refresh Display .
142 .
143 ,--, | ,--, .
144 | `-, ,^, ,-' | .
145 `, `-, (/ \) ,-' ,' .
146 --------------------------| Begin Installation |----------------------------- .
147 | |.
148 | This application will install DragonFly BSD on one of the hard disk drives |.
149 | attached to this computer. It has been designed to make it easy to install |.
150 | DragonFly BSD in the typical case. If you have special requirements that |.
151 | are not addressed by this installer, or if you have problems using it, you |.
152 | are welcome to install DragonFly BSD manually. To do so select Exit to Live |.
153 | CD, login as root, and follow the instructions given in the file /README . |.
154 | |.
155 | NOTE! As with any installation process, YOU ARE STRONGLY ENCOURAGED TO BACK |.
156 | UP ANY IMPORTANT DATA ON THIS COMPUTER BEFORE PROCEEDING! |.
157 | |.
158 | < Install DragonFly BSD >_ < Return to Welcome Menu > < Exit to Live CD > |.
159 ----------------------------| Press F1 for Help |---------------------------- .
160 .
161 .
162 .
163 .
164 .
165 .
166 .
167
16813. Highlight the option < Install DragonFly BSD > and press enter.
16914. The following menu, specific to your hardware, will be displayed.
170
171 F10=Refresh Display .
172 .
173 ,--, | ,--, .
174 | `-, ,^, ,-' | .
175 `, `-, (/ \) ,-' ,' .
176 `-, `-,/ \,-' ,-' .
177 `------( )------' .
178 ,----------( )----------, .
179 | _,-( )-,_ | .
180 ----------------------| Select Disk |----------------------,__,-' .
181 | | .
182 | Select a disk on which to install DragonFly BSD | .
183 | | .
184 | < ad1: 1337TB <VBOX HARDDISK 1.0> at ata0-master UDMA33 >_| .
185 | < Return to Begin Installation > | .
186 ----------------------------------------------------------- .
187 `|' .
188 .
189 .
190 .
191 .
192 .
193 .
194 .
195 .
196
19715. Highlight the disk on which to install DragonFly BSD and press Enter.
19816. The following menu will be displayed.
199
200 F10=Refresh Display .
201 .
202 ,--, | ,--, .
203 | `-, ,^, ,-' | .
204 `, `-, (/ \) ,-' ,' .
205 `-, `-,/ \,-' ,-' .
206 `------( )------' .
207 ,----------( )----------, .
208 ----------------------------| Select Disk |---------------------- | .
209 | |' .
210 | Select how much of this disk you want to use for DragonFly BSD | .
211 | | .
212 | ad1: 1337TB <VBOX HARDDISK 1.0> at ata0-master UDMA33 | .
213 | | .
214 | < Use Entire Disk >_ < Use Part of Disk > | .
215 | < Return to Select Disk > | .
216 ----------------------------------------------------------------- .
217 .
218 .
219 .
220 .
221 .
222 .
223 .
224 .
225
22617. If you would like to use your entire disk, then highlight < Use Entire Disk > and press enter.
22718. The following menu will be displayed.
228
229 F10=Refresh Display .
230 .
231 ,--, | ,--, .
232 | `-, ,^, ,-' | .
233 ------| Are you absolutely sure? |------/ \) ,-' ,' .
234 | | \,-' ,-' .
235 | WARNING! ALL data in ALL partitions on | )------' .
236 | the disk | )----------, .
237 | | )-,_ | .
238 | ad1: 1337TB <VBOX HARDDISK 1.0> at | / `-,__,-' .
239 | ata0-master UDMA33 | | .
240 | | | .
241 | will be IRREVOCABLY ERASED! | | .
242 | | | .
243 | Are you ABSOLUTELY SURE you wish to | | .
244 | take this action? This is your LAST | | .
245 | CHANCE to cancel! ||' .
246 | | .
247 | < OK >_ < Cancel > | .
248 ---------------------------------------- .
249 .
250 .
251 .
252 .
253 .
254
25519. If you are absolutely sure, highlight < OK > and press enter.
25620. The following menu will be displayed.
257
258 F10=Refresh Display .
259 .
260 ,--, | ,--, .
261 | `-, ,^, ,-' | .
262 `, `-, (/ \) ,-' ,' .
263 `-, `-,/ \,-' ,-' .
264 `------( )------' .
265 ---------| Information |-------------( )----------, .
266 | |( )-,_ | .
267 | The disk |\ / `-,__,-' .
268 | | | | .
269 | ad1: 1337TB <VBOX HARDDISK 1.0> at | | | .
270 | ata0-master UDMA33 | | | .
271 | | | | .
272 | was formatted. | | | .
273 | | | | .
274 | < OK > | `|' .
275 ------------------------------------ .
276 .
277 .
278 .
279 .
280 .
281 .
282 .
283
28421. Press enter.
28522. The following menu will be displayed.
286
287 F10=Refresh Display .
288 .
289 ,--, | ,--, .
290 | `-, ,^, ,-' | .
291 `, `-, (/ \) ,-' ,' .
292 `-, `-,/ \,-' ,-' .
293 `------( )------' .
294 -----------------| Select file system |------------------------, .
295 | | | .
296 | Please select the file system you want to use with |,__,-' .
297 | DragonFly BSD. | .
298 | | .
299 | HAMMER is the new DragonFly BSD file system. UFS is the | .
300 | traditional BSD file system. | .
301 | | .
302 | < Use HAMMER >_ < Use UFS > < Return to Select Disk > | .
303 --------------------------------------------------------- .
304 .
305 .
306 .
307 .
308 .
309 .
310 .
311 .
312
31323. If you want to use HAMMER, and honestly why wouldn't you, then highlight HAMMER and press enter.
31424. The following menu will be displayed.
315
316 F10=Refresh Display .
317 .
318 ,--, | ,--, .
319 --------------------| Create Subpartitions |--------------------- | .
320 | | ,' .
321 | Set up the partitions (also knows as just `partitions' in |' .
322 | BSD tradition) you want to have on this primary partition. In | .
323 | most cases you should be fine with the default settings. |-, .
324 | | | .
325 | For Capacity, use 'M' to indicate megabytes, 'G' to indicate |-' .
326 | gigabytes, or a single '*' to indicate 'use the remaining space | .
327 | on the primary partition'. | .
328 | | .
329 | Mountpoint Capacity Encrypted | .
330 | [/boot_ ] [768M ] [ ] < Ins > < Del > | .
331 | [swap ] [2048M ] [ ] < Ins > < Del > | .
332 | [/ ] [* ] [ ] < Ins > < Del > | .
333 | < Add > | .
334 | | .
335 | < Accept and Create > < Return to Select Disk > | .
336 -------------------| Press F1 for Help |------------------------- .
337 .
338 .
339 .
340 .
341
34225. Highlight < Accept and Create > and press enter.
34326. The following menu will be displayed.
344
345 F10=Refresh Display .
346 .
347 ,--, | ,--, .
348 | `-, ,^, ,-' | .
349 `, `-, (/ \) ,-' ,' .
350 `-, `-,/ \,-' ,-' .
351 -------------------------| Install OS |-------------------------- .
352 | |-, .
353 | Everything is now ready to install the actual files which | | .
354 | comprise the DragonFly BSD operating system on the selected |-' .
355 | partition of the selected disk. | .
356 | | .
357 | Note that this process will take quite a while to finish. You | .
358 | may wish to take a break now and come back to the computer in a | .
359 | short while. | .
360 | | .
361 | < Begin Installing Files >_ < Return to Create Subpartitions > | .
362 ----------------------------------------------------------------- .
363 .
364 .
365 .
366 .
367 .
368 .
369 .
370 .
371
37227. Highlight < Begin Installing Files > and press enter.
37328. The following progress bar will be displayed.
374
375 F10=Refresh Display .
376 .
377 ,--, | ,--, .
378 | `-, ,^, ,-' | .
379 `, `-, (/ \) ,-' ,' .
380 `-, `-,/ \,-' ,-' .
381 `------( )------' .
382 ,----------( )----------, .
383 -------------------| Executing Commands |------------------- | .
384 | |_,-' .
385 | /bin/cpdup -o -vvv -u /usr/pkg /mnt/usr/pkg | .
386 | | .
387 | [*#################58%# ] | .
388 | | .
389 | < Cancel >_ | .
390 ------------------------------------------------------------ .
391 `|' .
392 .
393 .
394 .
395 .
396 .
397 .
398 .
399 .
400
40129. Go brush your teeth. And don't forget to floss.
40230. When it finishes, the following menu will be displayed.
403
404 F10=Refresh Display .
405 .
406 ,--, | ,--, .
407 | `-, ,^, ,-' | .
408 ---------------| Install Bootblock(s) |----------------,-' ,' .
409 | | ,-' .
410 | You may now wish to install bootblocks on one or more |--' .
411 | disks. If you already have a boot manager installed, |------, .
412 | you can skip this step (but you may have to configure | | .
413 | your boot manager separately.) If you installed |-,__,-' .
414 | DragonFly BSD on a disk other than your first disk, | .
415 | you will need to put the bootblock on at least your | .
416 | first disk and the DragonFly disk. | .
417 | | .
418 | Disk Drive Install Bootblock? Packet Mode? | .
419 | [ad1_ ] [X] [X] | .
420 | | .
421 | < Accept and Install Bootblocks > | .
422 | < Skip this Step > | .
423 -----------------| Press F1 for Help |----------------- .
424 .
425 .
426 .
427 .
428 The disk on which you wish to install a bootblock .
429
43031. Highlight < Accept and Install Bootblocks > and press enter.
43132. An Information dialog box will be displayed which says: Bootblocks were successfully installed!
43233. Press enter.
43334. The following menu will be displayed.
434
435 ---| DragonFly BSD is Installed! |--
436 |
437 | Congratulations!
0befd86f 438 |
66660ae6 439 | DragonFly BSD has successfully been installed on this computer.
440 | You may now proceed to configure the installation. Alternately,
441 | you may wish to reboot the computer and boot into the installed
442 | system to confirm that it works.
443 |
444 | < Configure this System >_ < Reboot >
445 | < Return to Welcome Menu >
446 ---
5e91eec6 447
0befd86f 44835. Highlight < Configure this System > and press enter.
44936. The following menu will be displayed.
450
451 ---| Configure an Installed System |--
452 |
453 | The options on this menu allow you to
454 | configure a DragonFly BSD system after
455 | it has already been installed.
456 | < Select timezone >_
457 | < Set date and time >
458 | < Set keyboard map >
459 | < Set root password >
460 | < Add a user >
461 | < Configure network interfaces >
462 | < Configure hostname and domain >
463 | < Set console font >
464 | < Set screen map >
465 | < Remove software packages >
466 | < Return to Welcome Menu >
467 ---
468
46937. Highlight < Select timezone > and press enter.
470
471(The only purpose of this line is to reduce the indentation of the following bullet points.)
472
473* Highlight < Set keyboard map > and press enter.
474* Highlight < Set root password > and press enter.
475* changeme
476* Highlight < Add a user > and press enter.
477* Password: changeme
478* Highlight < Configure network interfaces > and press enter.
479* Highlight < Configure hostname and domain > and press enter.
480* Highlight < Return to Welcome Menu > and press enter.
481* Highlight < Reboot this Computer > and press enter.
482* Highlight < Reboot > and press enter.
483* Remove installation media.
484* The operating system has halted.
485* Please press any key to reboot.
486* Log in as root.
487* Change password.
488* ee /etc/hosts
489* # Replace hostname and domain with the ones that you chose during configuration.
490* ::1 localhost hostname.domain
491* 127.0.0.1 localhost hostname.domain
492* Ctrl-[
493* a) leave editor
494* a) save changes
495* exit
496* Log in as user.
497* Change password.
e59d72e5 498* startxfce4 (I think that running startx from the root user starts Xfce, but running it from a regular user starts the non-Xfce GUI.)
0befd86f 499
5e91eec6 500## Tidbits
52ea7cc8 501* In the default shell, **tcsh**, ctrl-d is equivalent to tab-tab in **bash**, both of which display possible auto completions. If the list of possible auto completions has changed, running the command rehash will update it. Typing part of a previous command and then pressing the up key is equivalent to pressing ctrl-r and then typing part of a previous command, both of which search previously run commands.
37b8379c 502* **pkgin** is roughly equivalent to **apt-get**. They are both fairly straightforward command line package management utilities. Regular programs installed via pkgin are generally located in /usr/pkg/bin.
503* Like Debian, DragonFly BSD is configured by default to use su by default rather sudo, which is the default in Ubuntu. Running su changes the user you are logged in within a single shell instance whereas sudo lets you run a single command as another user. Both programs default to changing the user to root user. To enable your regular user to use su to become root, as root run nano /etc/groups and then change the line wheel:*:0:root to wheel:*:root,yourusername except of course replace rourusername with your user name. Running su - will change the shell environment variables to that of the user to which you're changing.
52ea7cc8 504* The console text editor vi is supposedly great, but if you're not familiar with it and some command you run opens some system file with it, it can be quite alarming. Don't panic! To exit without saving changes type :q! and then press enter.
505* The command line program man, short for manual, is very handy for finding out information about programs, system files and more. One way to navigate man pages is by using your arrow keys. You can exit out of a manual page by pressing the letter q on your keyboard. To learn more about the man command, run the command man man which will show you the manual page for the man command.
506* When your computer contacts another computer over the Internet, it converts server's name, such as example.com, to numbered address. The server's name is called a domain name and the numbered address is called an IP address, short for Internet protocol address. To find out which domain name goes with which IP address, you computer usually contacts a special server called a DNS server, DNS being an abbreviation of domain name system. DNS generally works pretty well automatically, but when it causes a problem, it can be very frustrating. As of DragonFly BSD 3.0.3, there's a non-critical DNS configuration setting that the DragonFly BSD installer doesn't set. The file /etc/hosts is a text file that can override DNS name-address bindings. The IP addresses 127.0.0.1 and ::1 always point to one's own computer, so your computer's domain name should always point to these two addresses. This is the setting that currently doesn't get set automatically. You can see or set your host name within the file /etc/rc.conf on a line by itself in the following format.
507
508 hostname="computername.localnetworkname"
509
510 And with that name, you can update your /etc/hosts file with your computer's domain name by editing it to contain the following lines.
511
512 ::1 localhost computername.localnetworkname
513 127.0.0.1 localhost computername.localnetworkname
514
515* In DragonFly BSD the command *shutdown -p now* will shutdown and turn off your computer. Using the -h switch instead of -p will shutdown and halt the computer but not turn it off. In Debian and probably other Linux distributions, the command *shutdown -h now* will shutdown and turn off your computer. The -p switch isn't available, but there may be a way to shutdown and halt without turning off your computer.
c73a5f26 516* **Hammer** is hands down the best file system currently in existence. It has block level deduplication, it is supported out of the box by operating system with great underpinnings, and it runs great on regular hardware.
517* **DragonFly BSD** is an awesome operating system for many reasons other than that it's the only OS with Hammer, but Hammer is why I'm making the switch. DragonFly's default GUI configuration is a bit rough around the edges for everyday use. But it's nothing that a little ironing can't fix.
8df94b7a 518* **[Xfce](http://xfce.org/)** is a lightweight yet feature rich desktop environment. It has maintains an excellent balance between [innovation and compatibility](http://lwn.net/Articles/430598/).
88174747 519* **[Dissonance](https://github.com/varialus/dissonance)** is my fork of Apache Harmony, which is a clean room implementation of Java with a permissive license. Sun and now Oracle refuse to license the TCK, a tool used to validate Java compatibility, for use with Harmony. As a result of the dissonance caused by this refusal to cooperate with the community, Apache retired Harmony and resigned from the Java Community Process Executive Committee. I would have preferred for Apache and the community to have instead just written their own TCK, but I don't know what effects the dissonance had on their organization and it was their decision to make, so I can't blame them. It's unfortunate that such a great project has been effectively abandoned, and so it it is with that in mind that I call on the community to support Dissonance; make your own TCK and make it so much better so as to make passing Oracle's TCK effectively meaningless.
12e7194b 520* **[Jython](http://www.jython.org/)** is Python written in Java. It's not included in DragonFly BSD by default, but it's a great tool and I use it.
521* **ee** is roughly equivalent to **nano**. They are both easy to use command line text editors. The exit option will ask you whether you want to save. You can get to the exit confirmation by pressing Ctrl-[ and selecting 'a) leave editor'.
52ea7cc8 522* If NetworkManager Applet is installed, use it to override an unreliable DNS server rather than editing /etc/resolv.conf directly. Observed in NetworkManager 0.8.1 on Debian Squeeze. (This seems to not always work, particularly the first time you connect and perhaps after idling for a certain amount of time. I haven't narrowed down the exact cause.)
c73a5f26 523
5e91eec6 524## Issues
b5491331 525* Varialus should ensure that these issues are properly logged. Yes, I know that they should be properly logged and I intend to eventually get them all logged. In the mean time hopefully my notes will help someone still trying to find the answers to life's persistent questions.
8df94b7a 526* The installer should offer the Xfce desktop environment as a supported option. Observed in DragonFly 3.0.2. See workaround below.
74c82ddf 527* The installer should set the keyboard layout before any typing is required. Observed in DragonFly 3.0.2.
c1758fdf 528* The installer should set the keyboard layout for the GUI. Observed in DragonFly 3.0.2. See workaround below.
dabfe801 529* The installer should set the keyboard layout for the encryption password prompt. Observed in DragonFly 3.0.2.
c1758fdf 530* The installer should configure the keyboard within the GUI to be able to use the caps lock key. Observed in DragonFly 3.0.2. See workaround below.
74c82ddf 531* When encrypting the swap partition, the installer should configure the boot loader to generate a random key each time the system is booted so that the password doesn't have to be typed twice when the system is booted. Observed in DragonFly 3.0.2.
532* When configuring the system from the installer, if the system just finished installing with encryption, the hard drive should stay unlocked so that the user doesn't have to type in his password again. Observed in DragonFly 3.0.2.
533* When configuring the system from the installer, if the system is encrypted but was not just barely installed, the user should only have to type in his password once, not twice. Observed in DragonFly 3.0.2.
2085015f 534* When creating a user password in the installer, the password should not be written to a plain text installation log. Observed in DragonFly BSD 3.0.2.
74c82ddf 535* When installing from a USB device onto a USB device, the installer should ensure that installed media is named such that when booted without the USB installer, the installed device name doesn't change. Observed in DragonFly 3.0.2.
c1758fdf 536* When installing onto a 3TB+ hard drive, the default partition table should be able to handle that size. Observed in DragonFly 3.0.2. Fixed and tested in snapshot on 8/14/2012. See workaround below.
74c82ddf 537* After selecting to install using all of a 3TB+ hard drive that already has an MS-DOS/MBR partition table on it, the installer should overwrite the partition table with an adequate partition table such as GPT. Observed in snapshot on 8/14/2012.
dabfe801 538* The default shell provided by the installer should list valid auto completion options after typing a partial command and then pressing tab two or more times. Observed in DragonFly 3.0.2.
74c82ddf 539* ->Excepting the bullet point, this syntax should center text in this wiki.<- Observed on 8/25/2012.
12e7194b 540* The following errors should not occur when quitting from the GUI.
541
542 waiting for X server to shut down xterm: fatal IO error 35 (Resource temporarily unavailable) or KillClient on X server ":0.0"
543 xterm: fatal IO error 35 (Resource temporarily unavailable) or KillClient on X server "0.0"
544 failed to unset mtrr: Device not configured
545
546
547 xauth: (argv):1: bad display name "myhostname.mysubdomain.mytld:0" in "remove" command
548
549 Observed in DragonFly BSD 3.0.2 64-bit on VirtualBox 4.1.20 in Debian Squeeze.
a7b44ded 550
5e91eec6 551## Workarounds
c1758fdf 552**Enable the Caps Lock Key within the GUI**
553
554Edit the file /etc/X11/xorg.conf.
555
556 ee /etc/X11/xorg.conf
557
558Delete the ctrl:nocaps XkbOptions option from the InputDevice section with the identifier Keyboard0 of the xorg.conf file. Or comment it out by prefixing the line with the # symbol.
559
560 Section "InputDevice"
561 Identifier "Keyboard0"
562 Driver "kbd"
563 #Option "XkbOptions" "ctrl:nocaps"
564 EndSection
565
c73a5f26 566Observed in DragonFly BSD 3.0.2.
567
c1758fdf 568**Install Non-GUI on 3TB+ Hard Drive**
569
570*WARNING:* This workaround includes instructions which will delete all data from a hard drive.
571
572Delete the partition table from the hard drive. There are various tools with which to do this, one particularly easy to use tool is the [GParted Live CD/USB](http://gparted.sourceforge.net/livecd.php).
573
574Install from a [snapshot version of DragonFly](http://avalon.dragonflybsd.org/snapshots/). Be aware that snapshot versions are less thoroughly tested than stable releases.
575
576Tested in snapshot on 8/14/2012.
577
f378b134 578**Install Xfce 4.6**
579
580*WARNING:* This workaround is not yet complete. Contributions are welcome.
581
2085015f 582The following testing is being done with a root account and no user account. Additional testing with a regular user account will be done later.
583
584*DragonFly BSD 3.1-DEVELOPMENT Non-GUI Instructions*
585
5cde5737 586Summary
587
588* Install XOrg if it's not already installed.
589* Ensure that mouse works.
590* Get the xfce4 meta-package make file.
591* Install binary files listed in xfce4 meta-package make file.
592
593These instructions are currently a mess. They're currently just a rough outline of how I got it working. I'll go through and clean it up later.
594
6216ff22 595Get a list of which packages would be included if Xfce was installed from source. If you haven't already done so, [create and update the pkgsrc tree](http://www.dragonflybsd.org/docs/howtos/HowToPkgsrc/#index2h2). Running make pkgsrc-create failed for me when I ran it in my virtual machine with 2 GB, but succeeded when I ran it with 3171 MB.
2085015f 596
597 cd /usr/
598 make pkgsrc-create
599 make pkgsrc-update
6216ff22 600 cd /usr/pkgsrc/meta-pkgs/xfce4
601 pkgin update
5cde5737 602 pkgin in `cat Makefile | grep -E "xfce4.*mk" | sed -e 's/.include.*\/xf/xf/g' -e 's/\/.*/ /g' | tr -d "\n"`
6216ff22 603 pkg_radd modular-xorg
604 ls /dev/
605
606Log into another console window by pressing Ctrl-Alt-F2 or in VirtualBox, Alt-F2.
607
608 man moused
609
610Scroll down until you find where it mentions mouse dev names.
611
612 ee /etc/X11/xorg.conf
613
614Comment out the /dev/sysmouse line by putting a # in front of it. Add the following line.
615
616 Option "Device" "/dev/psm0"
617
618Except replace psm0 with whichever mouse you've got listed in /dev. Then save the file.
619
620 startxfce4
2085015f 621
622*DragonFly BSD 3.0.2 GUI Instructions*
623
624I got the message Error Code 1 while creating and updating my pkgsrc tree. I haven't yet looked into it further.
625
626Get a list of which packages would be included if Xfce was installed from source. If you haven't already done so, [create and update the pkgsrc tree](http://www.dragonflybsd.org/docs/howtos/HowToPkgsrc/#index2h2).
627
628 cd /usr/
629 make pkgsrc-create
630 make pkgsrc-update
631
632Get a list of which packages would be included if Xfce was installed from source. The pkgsrc tree was maybe already created by default on this version of DragonFly BSD. If it has not already been created, you'd first want to [create it](http://www.dragonflybsd.org/docs/howtos/HowToPkgsrc/#index2h2) before continuing. Update the pkgsrc tree.
633
634 cd /usr/
635 make pkgsrc-update
636
637*Notes*
f378b134 638
9ddcfc4c 639* [XFCE based LiveDVD/IMG](http://leaf.dragonflybsd.org/mailarchive/users/2012-07/msg00123.html)
640* [Installing a Desktop Environment: Xfce4](http://www.dragonflybsd.org/docs/how_to_get_to_the_desktop/#index11h3)
641* [Desktop Environments: Xfce](http://www.dragonflybsd.org/docs/newhandbook/X/#index9h3)
642* [Longest DragonFly BSD Review: Running Xfce in DragonFlyBSD 3.0.1](http://insidesocal.com/click/2012/04/review-dragonflybsd-301----the-5.html)
f378b134 643* [Instructions via Google Translate](http://www.google.com/translate_c?langpair=en&u=http://dragonflybsd.fr/index.php?page=Installation+de+Xfce4)
644* [Installing pkgsrc](http://www.dragonflybsd.org/docs/howtos/HowToPkgsrc/#index2h2)
645
2085015f 646 pkgin search xfce
647
f378b134 648**Install Xfce 4.8**
649
650*WARNING:* This workaround is not yet complete. Contributions are welcome.
651
652* [Choosing between portability and innovation](http://lwn.net/Articles/430598/)
653* [Xfce 4.8 on BSD flavors](http://gezeiten.org/post/2011/01/Xfce-4.8-on-BSD-flavors)
654* [Xfce 4.8 tour](http://xfce.org/about/tour48)
655
9ddcfc4c 656**Install Xfce 4.10**
657
658*WARNING:* This workaround is not yet complete. Contributions are welcome.
659
660* [Xfce 4.10 released](http://www.xfce.org/about/news/?post=1335571200)
661* [Xfce 4.10 tour](http://xfce.org/about/tour)
662
a7b44ded 663**Set the GUI Keyboard Layout**
664
665Edit the file /etc/X11/xorg.conf.
666
667 ee /etc/X11/xorg.conf
668
669Set the XkbVariant option to your keyboard variant.
670
671 Section "InputDevice"
672 Identifier "Keyboard0"
673 Driver "kbd"
674 Option "XkbVariant" "dvorak"
675 EndSection
676
677Valid keyboard options can be found by searching through /usr/pkg/share/X11/xkb/symbols/ for example to find references to the dvorak keyboard layout, run the following command.
678
679 grep --color -n -r dvorak /usr/pkg/share/X11/xkb/symbols
680
681If too many lines scroll by, you can use your arrow buttons to scroll back within the non-graphical console screen by pressing the Scroll Lock button on your keyboard.
682
74c82ddf 683Tested in DragonFly 3.0.2.
6848ea64 684
b1839790 685## Contribute
686
687**Port VirtualBox to DragonFly BSD**
688
b2a6f092 689 - Build VirtualBox in GhostBSD (GhostBSD is FreeBSD with Gnome or LXDE installed out of the box.)
690 - Install GhostBSD (Gnome version 3.0 RC1 in VirtualBox)
691 - It's easier to change the keyboard layout in the Gnome version.
692 - If your keyboard stops working during the install then do the following.
693 - Restart GhostBSD LiveCD/LiveUSB
694 - Applications > Accessories > Text Editor
695 - Type your answers to the following fields.
696 - root password
697 - username
698 - full name of user
699 - user password
700 - hostname.
701 - Copy and paste your answers into the installer.
702 - Initialize build environment: http://www.freebsd.org/doc/handbook/updating-upgrading-portsnap.html
703 - Handbook Instructions: http://www.freebsd.org/doc/handbook/updating-upgrading-portsnap.html
704 - portsnap fetch (68 MB as root)
705 - portsnap extract (as root)
706 - portsnap update (as root)
707 - Install Guest Additions (from FreeBSD, not from Oracle)
708 - Initialize build environment (See above)
709 - Wiki Instructions: http://wiki.freebsd.org/VirtualBox#Installing_Guest_Additions_for_FreeBSD_guests
710 - Handbook Instructions: http://www.freebsd.org/doc/handbook/virtualization-guest.html
711 - Notes: http://forums.ghostbsd.org/viewtopic.php?f=8&t=693
712 - More Notes: http://forums.freebsd.org/showthread.php?t=29172
713 - Create a supfile.
714 - ee /root/9rel-supfile (as root)
715 - Firefox within VM http://www.dragonflybsd.org/varialus/
716 - Copy and paste the following into your supfile.
717 *default host=CHANGE_THIS.FreeBSD.org
718 *default base=/var/db
719 *default prefix=/usr
720 *default release=cvs tag=RELENG_9_1
721 *default delete use-rel-suffix
722 *default compress
723 src-all
724 - Firefox http://www.freebsd.org/doc/en/books/handbook/cvsup.html#CVSUP-MIRRORS
725 - Pick close server and change line *default host=CHANGE_THIS.FreeBSD.org
726 - Optionally pick fastest server: http://www.freshports.org/sysutils/fastest_cvsup
727 - Ctrl-[
728 - a) leave editor
729 - a) save changes
730 - cd /root/ (as root)
731 - csup 9rel-supfile (as root)
0eb38dce 732 - If outgoing connections to port 5999 are blocked, here are a few possible solutions which I have not yet tried.
733 - http://lists.freebsd.org/pipermail/freebsd-stable/2005-August/017991.html
734 - http://lists.freebsd.org/pipermail/freebsd-questions/2004-February/034761.html
735 - http://lists.freebsd.org/pipermail/freebsd-questions/2004-March/041566.html
b2a6f092 736 - cd /usr/ports/emulators/virtualbox-ose-additions && make install clean (as root)
d3c598d8 737 - The following console dialog will be be displayed.
738 - Options for virtualbox-ose-additions 4.1.22
739 - [ ] DEBUG Install debug symbols
740 - [ ] OPENGL OpenGL support
741 - [X] X11 X11 support (graphics)
742 - < OK > <Cancel>
743 - Highlight < OK > and press enter.
9b3baec9 744 - The first time I ran this I got a missing dependency error because there had been a minor version update recently. The dependency error was fixed a few hours later. Right after that, the official version of 4.2 was released. To see the original error error, see the edit from 01:48:39 09/13/12.
745 - The following console dialog will be be displayed.
746 - Options for help2man1.40.11
747 - [X] NLS Native Language Support
748 - < OK > <Cancel>
749 - Highlight < OK > and press enter.
750 - The following console dialog will be be displayed.
751 - Options for m4 1.4.16_1,1
752 - [ ] LIBSIGSEGV Use libsigsegv for better diagnostics
753 - < OK > <Cancel>
754 - Highlight < OK > and press enter.
755 - Wait for a little while until it successfully finishes.
756 - Restart virtual machine. (This probably wasn't needed yet.)
757 - Screen resolution increased, but no mouse integration nor copy and paste. Host is Debian Squeeze.
758 - ee /etc/rc.conf (as root)
759 - Add the following lines
be07e999 760
9b3baec9 761 vboxguest_enable="YES"
762 vboxservice_enable="YES"
be07e999 763
9b3baec9 764 - The notes at the URL above mention adding lines to xorg.conf for mouse integration, but I didn't see an xorg.conf in /etc/X11 or in /etc so I skipped this step for now.
765 - The notes also mentioned creating a file for HAL users or copying it, but I didn't see a file at /usr/local/share/hal/fdi/policy/10osvendor/90-vboxguest.fdi so I am skipping this step for the moment.
766 - Restart.
767 - I just noticed that the lines had already been added to /etc/rc.conf, so I removed the extra ones that I had added.
768 - Changed to terminal without X server. Host+F2 in VirtualBox, Ctrl-Alt-F2 on hardware.
769 - Log in as root.
770 - The following didn't work.
771 - killall -9 gdm gdm-binary Xorg
772 - Xorg -configure
773 - Xorg -config /root/xorg.conf.new
774 - X started with black screen, no mouse.
775 - I've run out of time to look into this at the moment. I'll return to it later.
b2a6f092 776 - Build VirtualBox
777 - Initialize build environment (See above)
778 - Build Guest Additions
779 - Build VirtualBox in DragonFly BSD
780 - Install DragonFly BSD (Xfce IMG/ISO Installer)
781 - Build VirtualBox
782 - Install VirtualBox
783 - Test VirtualBox
784 - Build Guest Additions
785 - Install Guest Additions
786 - Test Guest Additions
787 - Package for pkgsrc
788 - Upload to pkgsrc
b1839790 789
790**Port Xfce 4.10 to DragonFly BSD**
791
b2a6f092 792 - Install DragonFly BSD (Xfce IMG/ISO Installer in VirtualBox)
793 - Build Instructions: http://docs.xfce.org/xfce/building
794 - Package for pkgsrc
795 - Upload to pkgsrc
b1839790 796
797**DragonFly BSD Network Shares Walkthrough**
798
b2a6f092 799 - Install DragonFly BSD (Xfce IMG/ISO Installer in VirtualBox)
b1839790 800
801**Port bxpkg to DragonFly BSD**
802
b2a6f092 803 - Install DragonFly BSD (Xfce IMG/ISO Installer in VirtualBox)