2 ***Updated for X.Org's X11 server by Ken Tom and Marc Fonvieille. Updated for DragonFly by Victor Balada Diaz.***
9 DragonFly uses X11 to provide users with a powerful graphical user interface. X11 is an open-source implementation of the X Window System that includes both **X.org** and **XFree86™** . DragonFly default official flavor is **X.org**. This chapter will cover the installation and configuration of X11. For more information on the video hardware that X11 supports, check either [X.org](http://www.x.org/) web site.
13 After reading this chapter, you will know:
18 * The various components of the X Window System, and how they interoperate.
19 * How to install and configure X11.
20 * How to install and use different window managers.
21 * How to use True***Type® fonts in X11.
22 * How to set up your system for graphical logins ( **XDM** ).
26 Before reading this chapter, you should:
28 * Know how to install additional third-party software. Compare the pkgsrc chapter of the handbook.
36 ### The Window Manager
40 The X design philosophy is much like the UNIX design philosophy, ***tools, not policy***. This means that X does not try to dictate how a task is to be accomplished. Instead, tools are provided to the user, and it is the user's responsibility to decide how to use those tools. This philosophy extends to X not dictating what windows should look like on screen, how to move them around with the mouse, what keystrokes should be used to move between windows (i.e., **Alt** + **Tab** , in the case of Microsoft Windows), what the title bars on each window should look like, whether or not they have close buttons on them, and so on.
44 Instead, X delegates this responsibility to an application called a ***Window Manager***. There are dozens of window managers available for X: ***'After***Step***', **Blackbox** , **ctwm** , **Enlightenment** , **fvwm** , **Sawfish** , **twm** , **Window Maker** , and more. Each of these window managers provides a different look and feel; some of them support ***virtual desktops***; some of them allow customized keystrokes to manage the desktop; some have a ***Start*** button or similar device; some are ***themeable***, allowing a complete change of look-and-feel by applying a new theme. These window managers, and many more, are available in the `wm` category of the pkgsrc collection.
48 In addition, the **KDE** and **GNOME** desktop environments both have their own window managers which integrate with the desktop. Each window manager also has a different configuration mechanism; some expect configuration file written by hand, others feature GUI tools for most of the configuration tasks; at least one ( **Sawfish** ) has a configuration file written in a dialect of the Lisp language.
56 **X.org** is currently available in the DragonFly pkgsrc framework.
61 # cd /usr/pkgsrc/x11/modular-xorg
67 Alternatively, X11 can be installed directly from pre built packages with [pkg_radd(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=pkg_radd§ion=1). So to fetch and install the package of **X.org**, type:
70 # pkg_radd modular-xorg
73 **Note:** The examples above will install the complete X11 distribution including the server, drivers, programs, libraries and fonts. Separate packages for everything are available.
86 ***Contributed by Christopher Shumway. ***
92 As of version 7.3, Xorg can often work without any configuration file by simply typing at prompt:
101 If this does not work, or if the default configuration is not acceptable, then X11 must be configured manually. Configuration of X11 is a multi-step process. The first step is to build an initial configuration file. As the super user, simply run:
108 This will generate an X11 configuration skeleton file in the `/root` directory called `xorg.conf.new` (whether you [su(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=su&section=1) or do a direct login affects the inherited supervisor `$HOME` directory variable). The X11 program will attempt to probe the graphics hardware on the system and write a configuration file to load the proper drivers for the detected hardware on the target system.
112 The next step is to test the existing configuration to verify that **X.org** can work with the graphics hardware on the target system. To perform this task, type:
116 # Xorg -config xorg.conf.new
119 If a black and grey grid and an X mouse cursor appear, the configuration was successful. To exit the test, just press **Ctrl** + **Alt** + **Backspace** simultaneously.
123 **Note:** If the mouse does not work, you will need to first configure it before proceeding. This can usually be achieved by just using `/dev/sysmouse` as the input device in the config file and enabling `moused`:
127 **Note** http://technoninja.blogspot.com/2010/07/dragonflybsd-mouse-wtf-problem-fix.html
129 Next, you may need the following information about the target system:
133 * Monitor specifications
136 * Video Adapter chipset
139 * Video Adapter memory
143 The specifications for the monitor are used by X11 to determine the resolution and refresh rate to run at. These specifications can usually be obtained from the documentation that came with the monitor or from the manufacturer's website. There are two ranges of numbers that are needed, the horizontal scan rate and the vertical synchronization rate.
147 The video adapter's chipset defines what driver module X11 uses to talk to the graphics hardware. With most chipsets, this can be automatically determined, but it is still useful to know in case the automatic detection does not work correctly.
151 Video memory on the graphic adapter determines the resolution and color depth which the system can run at. This is important to know so the user knows the limitations of the system.
153 Tune the `xorg.conf.new` configuration file to taste. Open the file in a text editor such as [vi(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=vi§ion=1) or [ee(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=ee&section=1). First, add the frequencies for the target system's monitor. These are usually expressed as a horizontal and vertical synchronization rate. These values are added to the `xorg.conf.new` file under the `"Monitor"` section:
158 Identifier "Monitor0"
159 VendorName "Monitor Vendor"
160 ModelName "Monitor Model"
167 The `HorizSync` and `VertRefresh` keywords may be missing in the configuration file. If they are, they need to be added, with the correct horizontal synchronization rate placed after the `HorizSync` keyword and the vertical synchronization rate after the `VertRefresh` keyword. In the example above the target monitor's rates were entered.
171 X allows DPMS (Energy Star) features to be used with capable monitors. The [xset(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=xset§ion=1) program controls the time-outs and can force standby, suspend, or off modes. If you wish to enable DPMS features for your monitor, you must add the following line to the monitor section:
177 While the `xorg.conf.new` configuration file is still open in an editor, select the default resolution and color depth desired. This is defined in the `"Screen"` section:
196 The `DefaultDepth` keyword describes the color depth to run at by default. This can be overridden with the `-depth` command line switch to [Xorg(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=xorg§ion=1). The `Modes` keyword describes the resolution to run at for the given color depth. Note that only VESA standard modes are supported as defined by the target system's graphics hardware. In the example above, the default color depth is twenty-four bits per pixel. At this color depth, the accepted resolution is 1024 by 768 pixels.
199 Finally, write the configuration file and test it using the test mode given above.
202 **Note:** One of the tools available to assist you during troubleshooting process are the X11 log files, which contain information on each device that the X11 server attaches to. **X.org** log file names are in the format of `/var/log/Xorg.0.log`. The exact name of the log can vary from `Xorg.0.log` to `Xorg.8.log` and so forth.
206 If all is well, the configuration file needs to be installed in a common location where [Xorg(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=xorg§ion=1) can find it. This is typically `/etc/X11/xorg.conf` or `/usr/pkg/xorg/lib/X11/xorg.conf`.
210 # cp xorg.conf.new /etc/X11/xorg.conf
214 The X11 configuration process is now complete. You can start **X.org** with [startx(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=startx§ion=1). The X11 server may also be started with the use of [xdm(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=xdm§ion=1).
217 **Note:** There is also a graphical configuration tool, [xorgcfg(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=xorgcfg§ion=1), that comes with the X11 distribution. It allows you to interactively define your configuration by choosing the appropriate drivers and settings. This program can be invoked from the console, by typing the command `xorgcfg -textmode`. For more details, refer to the [xorgcfg(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=xorgcfg§ion=1) manual page.
220 Alternatively, there is also a tool called [xorgconfig(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=xorgconfig§ion=1), this program is a console utility that is less user friendly, but it may work in situations where the other tools do not.
224 ### Advanced Configuration Topics
228 #### Configuration with Intel® i810 Graphics Chipsets
232 Configuration with Intel® i810 integrated chipsets requires the `agpgart` AGP programming interface for X11 to drive the card. See the [agp(4)](http://leaf.dragonflybsd.org/cgi/web-man?command=agp&section=4) driver manual page for more information.
235 This will allow configuration of the hardware as any other graphics board. Note on systems without the [agp(4)](http://leaf.dragonflybsd.org/cgi/web-man?command#agp§ion4) driver compiled in the kernel, trying to load the module with [kldload(8)](http://leaf.dragonflybsd.org/cgi/web-man?command=kldload§ion=8) will not work. This driver has to be in the kernel at boot time through being compiled in or using `/boot/loader.conf`.
238 **Note:** If you are using **XFree86 4.1.0** (or later) and messages about unresolved symbols like `fbPictureInit` appear, try adding the following line after `Driver "i810"` in the X11 configuration file:
253 ## Using Fonts in X11
254 <!-- XXX: do we really need this? -->
257 ***Contributed by Murray Stokely. ***
265 The default fonts that ship with X11 are less than ideal for typical desktop publishing applications. Large presentation fonts show up jagged and unprofessional looking, and small fonts in **Netscape®** are almost completely unintelligible. However, there are several free, high quality Type1 (Post***Script®) fonts available which can be readily used with X11. For instance, the Freefonts collection (['fonts/freefonts'](http://pkgsrc.se/fonts/freefonts)) includes a lot of fonts, but most of them are intended for use in graphics software such as the **Gimp** , and are not complete enough to serve as screen fonts. In addition, X11 can be configured to use True***Type® fonts with a minimum of effort. For more details on this, see the [X(7)](http://leaf.dragonflybsd.org/cgi/web-man?command=X§ion=7) manual page or the [ section on TrueType fonts](x-fonts.html#TRUETYPE).
269 To install the Freefonts font collection from the pkgsrc framework, run the following commands:
275 # cd /usr/pkgsrc/fonts/freefonts
277 # bmake install clean
283 And likewise with the other collections. To have the X server detect these fonts, add an appropriate line to the X server configuration file in `/etc/X11/xorg.conf`, which reads:
289 FontPath "/usr/pkg/lib/X11/fonts/freefont/"
295 Alternatively, at the command line in the X session run:
301 % xset fp+ /usr/pkg/lib/X11/fonts/freefont/
309 This will work but will be lost when the X session is closed, unless it is added to the startup file (`~/.xinitrc` for a normal `startx` session, or `~/.xsession` when logging in through a graphical login manager like **XDM** ). A third way is to use the new `/usr/pkg/xorg/etc/fonts/local.conf` file: see the section on [ anti-aliasing](x-fonts.html#ANTIALIAS).
317 **X.org** has built in support for rendering True***Type fonts. There are two different modules that can enable this functionality. The freetype module is used in this example because it is more consistent with the other font rendering back-ends. To enable the freetype module just add the following line to the `"Module"` section of the `/etc/X11/xorg.conf` file.
329 Now make a directory for the True***Type fonts (for example, `/usr/pkg/xorg/lib/X11/fonts/TrueType`) and copy all of the True***Type fonts into this directory. Keep in mind that True***Type fonts cannot be directly taken from a Macintosh®; they must be in UNIX®/MS-DOS®/Windows® format for use by X11. Once the files have been copied into this directory, use **ttmkfdir** to create a `fonts.dir` file, so that the X font renderer knows that these new files have been installed. 'ttmkfdir' is available from the pkgsrc framework as [`fonts/ttmkfdir2`](http://pkgsrc.se/fonts/ttmkfdir2).
335 # cd /usr/pkg/xorg/lib/X11/fonts/TrueType
337 # ttmkfdir -o fonts.dir
343 Now add the True***Type directory to the font path. This is just the same as described above for [ Type1](x-fonts.html#TYPE1) fonts, that is, use
349 % xset fp+ /usr/pkg/xorg/lib/X11/fonts/TrueType
357 or add a `FontPath` line to the `xorg.conf` file.
361 That's it. Now **Netscape** , **Gimp** , ***'Star***Office™***', and all of the other X applications should now recognize the installed True***Type fonts. Extremely small fonts (as with text in a high resolution display on a web page) and extremely large fonts (within **Star`Office** ) will look much better now.
365 ### Anti-Aliased Fonts
369 ***Updated by Joe Marcus Clarke. ***
373 Anti-aliasing has been available in X11 since **XFree86** 4.0.2. However, font configuration was cumbersome before the introduction of **XFree86** 4.3.0. Beginning with **XFree86** 4.3.0, all fonts in X11 that are found in `/usr/pkg/xorg/lib/X11/fonts/` and `~/.fonts/` are automatically made available for anti-aliasing to Xft-aware applications. Not all applications are Xft-aware, but many have received Xft support. Examples of Xft-aware applications include Qt 2.3 and higher (the toolkit for the **KDE** desktop), GTK+ 2.0 and higher (the toolkit for the **GNOME** desktop), and **Mozilla** 1.2 and higher.
377 In order to control which fonts are anti-aliased, or to configure anti-aliasing properties, create (or edit, if it already exists) the file `/usr/pkg/xorg/lib/etc/fonts/local.conf`. Several advanced features of the Xft font system can be tuned using this file; this section describes only some simple possibilities. For more details, please see [fonts-conf(5)](http://leaf.dragonflybsd.org/cgi/web-man?command=fonts-conf§ion=5).
381 This file must be in XML format. Pay careful attention to case, and make sure all tags are properly closed. The file begins with the usual XML header followed by a DOCTYPE definition, and then the `<fontconfig>` tag:
387 <?xml version="1.0"?>;
389 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
397 As previously stated, all fonts in `/usr/pkg/xorg/lib/X11/fonts/` as well as `~/.fonts/` are already made available to Xft-aware applications. If you wish to add another directory outside of these two directory trees, add a line similar to the following to `/usr/pkg/lib/etc/fonts/local.conf`:
403 <dir>/path/to/my/fonts</dir>;
409 After adding new fonts, and especially new font directories, you should run the following command to rebuild the font caches:
421 Anti-aliasing makes borders slightly fuzzy, which makes very small text more readable and removes "staircases" from large text, but can cause eyestrain if applied to normal text. To exclude font sizes smaller than 14 point from anti-aliasing, include these lines:
427 <match target="font">
429 <test name#"size" compare"less">
435 <edit name#"antialias" mode"assign">
443 <match target="font">
445 <test name#"pixelsize" compare"less" qual="any">
451 <edit mode#"assign" name"antialias">
463 Spacing for some monospaced fonts may also be inappropriate with anti-aliasing. This seems to be an issue with **KDE** , in particular. One possible fix for this is to force the spacing for such fonts to be 100. Add the following lines:
469 <match target#"pattern" name"family">
471 <test qual#"any" name"family">
473 <string>fixed</string>
477 <edit name#"family" mode"assign">
479 <string>mono</string>
485 <match target#"pattern" name"family">
487 <test qual#"any" name"family">
489 <string>console</string>
493 <edit name#"family" mode"assign">
495 <string>mono</string>
505 (this aliases the other common names for fixed fonts as `"mono"`), and then add:
511 <match target#"pattern" name"family">
513 <test qual#"any" name"family">
515 <string>mono</string>
519 <edit name#"spacing" mode"assign">
531 Certain fonts, such as Helvetica, may have a problem when anti-aliased. Usually this manifests itself as a font that seems cut in half vertically. At worst, it may cause applications such as **Mozilla** to crash. To avoid this, consider adding the following to `local.conf`:
537 <match target#"pattern" name"family">
539 <test qual#"any" name"family">
541 <string>Helvetica</string>
545 <edit name#"family" mode"assign">
547 <string>sans-serif</string>
557 Once you have finished editing `local.conf` make sure you end the file with the `</fontconfig>` tag. Not doing this will cause your changes to be ignored.
561 The default font set that comes with X11 is not very desirable when it comes to anti-aliasing. A much better set of default fonts can be found in the ['fonts/vera-ttf'](http://pkgsrc.se/fonts/vera-ttf) port. This port will install a `/usr/pkg/lib/etc/fonts/local.conf` file if one does not exist already. If the file does exist, the port will create a `/usr/pkg/lib/etc/fonts/local.conf-vera ` file. Merge the contents of this file into `/usr/pkg/lib/etc/fonts/local.conf`, and the Bitstream fonts will automatically replace the default X11 Serif, Sans Serif, and Monospaced fonts.
565 Finally, users can add their own settings via their personal `.fonts.conf` files. To do this, each user should simply create a `~/.fonts.conf`. This file must also be in XML format.
569 One last point: with an LCD screen, sub-pixel sampling may be desired. This basically treats the (horizontally separated) red, green and blue components separately to improve the horizontal resolution; the results can be dramatic. To enable this, add the line somewhere in the `local.conf` file:
575 <match target="font">
577 <test qual#"all" name"rgba">
579 <const>unknown</const>
583 <edit name#"rgba" mode"assign">
595 **Note:** Depending on the sort of display, `rgb` may need to be changed to `bgr`, `vrgb` or `vbgr`: experiment and see which works best.
601 Anti-aliasing should be enabled the next time the X server is started. However, programs must know how to take advantage of it. At present, the Qt toolkit does, so the entire **KDE** environment can use anti-aliased fonts. GTK+ and **GNOME** can also be made to use anti-aliasing via the "Font" capplet (see [x11-wm.html#X11-WM-GNOME-ANTIALIAS Section 5.7.1.3] for details). By default, **Mozilla** 1.2 and greater will automatically use anti-aliasing. To disable this, rebuild **Mozilla** with the `-DWITHOUT_XFT` flag.
608 ## The X Display Manager
610 ***Contributed by Seth Kingsley.***
618 The X Display Manager ( **XDM** ) is an optional part of the X Window System that is used for login session management. This is useful for several types of situations, including minimal "X Terminals", desktops, and large network display servers. Since the X Window System is network and protocol independent, there are a wide variety of possible configurations for running X clients and servers on different machines connected by a network. **XDM** provides a graphical interface for choosing which display server to connect to, and entering authorization information such as a login and password combination.
622 Think of **XDM** as providing the same functionality to the user as the [getty(8)](http://leaf.dragonflybsd.org/cgi/web-man?command=getty§ion=8) utility (see [ Section 17.3.2](term.html#TERM-CONFIG) for details). That is, it performs system logins to the display being connected to and then runs a session manager on behalf of the user (usually an X window manager). **XDM** then waits for this program to exit, signaling that the user is done and should be logged out of the display. At this point, **XDM** can display the login and display chooser screens for the next user to login.
630 The **XDM** daemon program is located in `/usr/pkg/xorg/bin/xdm`. This program can be run at any time as `root` and it will start managing the X display on the local machine. If **XDM** is to be run every time the machine boots up, a convenient way to do this is by adding an entry to `/etc/ttys`. For more information about the format and usage of this file, see [ Section 17.3.2.1](term.html#TERM-ETCTTYS). There is a line in the default `/etc/ttys` file for running the **XDM** daemon on a virtual terminal:
636 ttyv8 "/usr/pkg/xorg/bin/xdm -nodaemon" xterm off secure
642 By default this entry is disabled; in order to enable it change field 5 from `off` to `on` and restart [init(8)](http://leaf.dragonflybsd.org/cgi/web-man?command=init§ion=8) using the directions in [ Section 17.3.2.2](term.html#TERM-HUP). The first field, the name of the terminal this program will manage, is `ttyv8`. This means that **XDM** will start running on the 9th virtual terminal.
650 The **XDM** configuration directory is located in `/var/lib/xdm`. The sample configuration files are in `/usr/pkg/share/examples/xorg/xdm/`, in this directory there are several files used to change the behavior and appearance of **XDM** . Typically these files will be found:
654 <tablestyle="width:100%"> **File** | **Description**
655 <tablestyle="width:100%"> `Xaccess` | Client authorization ruleset.
656 `Xresources` | Default X resource values.
657 `Xservers` | List of remote and local displays to manage.
658 `Xsession` | Default session script for logins.
659 `Xsetup_`* | Script to launch applications before the login interface.
660 `xdm-config` | Global configuration for all displays running on this machine.
661 `xdm-errors` | Errors generated by the server program.
662 `xdm-pid` | The process ID of the currently running XDM. |
667 Also in this directory are a few scripts and programs used to set up the desktop when **XDM** is running. The purpose of each of these files will be briefly described. The exact syntax and usage of all of these files is described in [xdm(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=xdm§ion=1).
671 The default configuration is a simple rectangular login window with the hostname of the machine displayed at the top in a large font and "Login:" and "Password:" prompts below. This is a good starting point for changing the look and feel of **XDM** screens.
679 The protocol for connecting to **XDM** controlled displays is called the X Display Manager Connection Protocol (XDMCP). This file is a ruleset for controlling XDMCP connections from remote machines. It is ignored unless the `xdm-config` is changed to listen for remote connections. By default, it does not allow any clients to connect.
687 This is an application-defaults file for the display chooser and the login screens. This is where the appearance of the login program can be modified. The format is identical to the app-defaults file described in the X11 documentation.
695 This is a list of the remote displays the chooser should provide as choices.
703 This is the default session script for **XDM** to run after a user has logged in. Normally each user will have a customized session script in `~/.xsession` that overrides this script.
711 These will be run automatically before displaying the chooser or login interfaces. There is a script for each display being used, named `Xsetup_` followed by the local display number (for instance `Xsetup_0`). Typically these scripts will run one or two programs in the background such as `xconsole`.
719 This contains settings in the form of app-defaults that are applicable to every display that this installation manages.
727 This contains the output of the X servers that **XDM** is trying to run. If a display that **XDM** is trying to start hangs for some reason, this is a good place to look for error messages. These messages are also written to the user's `~/.xsession-errors` file on a per-session basis.
731 ### Running a Network Display Server
735 In order for other clients to connect to the display server, edit the access control rules, and enable the connection listener. By default these are set to conservative values. To make **XDM** listen for connections, first comment out a line in the `xdm-config` file:
741 ! SECURITY: do not listen for XDMCP or Chooser requests
743 ! Comment out this line if you want to manage X terminals with xdm
745 DisplayManager.requestPort: 0
751 and then restart **XDM** . Remember that comments in app-defaults files begin with a "!" character, not the usual "#". More strict access controls may be desired. Look at the example entries in `Xaccess`, and refer to the [xdm(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=xdm§ion=1) manual page for further information.
755 ### Replacements for XDM
759 Several replacements for the default **XDM** program exist. One of them, **kdm** (bundled with **KDE** ) is described later in this chapter. The **kdm** display manager offers many visual improvements and cosmetic frills, as well as the functionality to allow users to choose their window manager of choice at login time.
766 ## Desktop Environments
768 ***Contributed by Valentino Vaschetto. ***
770 This section describes the different desktop environments available for X on FreeBSD. A ***desktop environment*** can mean anything ranging from a simple window manager to a complete suite of desktop applications, such as **KDE** or **GNOME** .
782 **GNOME** is a user-friendly desktop environment that enables users to easily use and configure their computers. **GNOME** includes a panel (for starting applications and displaying status), a desktop (where data and applications can be placed), a set of standard desktop tools and applications, and a set of conventions that make it easy for applications to cooperate and be consistent with each other. Users of other operating systems or environments should feel right at home using the powerful graphics-driven environment that **GNOME** provides.
786 #### Installing GNOME
790 **GNOME** can be easily installed from a package or from the pkgsrc framework:
794 To install the **GNOME** package from the network, simply type:
802 To build **GNOME** from source, use the ports tree:
806 # cd /usr/pkgsrc/meta-pkgs/gnome
808 # bmake install clean
812 Once **GNOME** is installed, the X server must be told to start **GNOME** instead of a default window manager.
816 The easiest way to start **GNOME** is with **GDM** , the GNOME Display Manager. **GDM** , which is installed as a part of the **GNOME** desktop (but is disabled by default), can be enabled by adding `gdm_enable="YES"` to `/etc/rc.conf`. Once you have rebooted, **GNOME** will start automatically once you log in -- no further configuration is necessary.
820 **GNOME** may also be started from the command-line by properly configuring a file named `.xinitrc`. If a custom `.xinitrc` is already in place, simply replace the line that starts the current window manager with one that starts **/usr/pkg/bin/gnome-session** instead. If nothing special has been done to the configuration file, then it is enough simply to type:
826 % echo "/usr/pkg/bin/gnome-session" > ~/.xinitrc
832 Next, type `startx`, and the **GNOME** desktop environment will be started.
835 **Note:** If an older display manager, like **XDM** , is being used, this will not work. Instead, create an executable `.xsession` file with the same command in it. To do this, edit the file and replace the existing window manager command with **/usr/pkg/bin/gnome-session** :
841 % echo "#!/bin/sh" > ~/.xsession
843 % echo "/usr/pkg/bin/gnome-session" >> ~/.xsession
845 % chmod +x ~/.xsession
851 Yet another option is to configure the display manager to allow choosing the window manager at login time; the section on [ KDE details](x11-wm.html#X11-WM-KDE-DETAILS) explains how to do this for **kdm** , the display manager of **KDE** .
855 #### Anti-aliased Fonts with GNOME
859 X11 supports anti-aliasing via its ***RENDER*** extension. GTK+ 2.0 and greater (the toolkit used by **GNOME** ) can make use of this functionality. Configuring anti-aliasing is described in [ Section 5.5.3](x-fonts.html#ANTIALIAS).
861 So, with up-to-date software, anti-aliasing is possible within the **GNOME** desktop. Just go to **Applications->Desktop Preferences->Font** , and select either Best shapes, Best contrast, or Subpixel smoothing (LCDs). For a GTK+ application that is not part of the **GNOME** desktop, set the environment variable `GDK_USE_XFT` to `1` before launching the program.
873 **KDE** is an easy to use contemporary desktop environment. Some of the things that **KDE** brings to the user are:
875 * A beautiful contemporary desktop
877 * A desktop exhibiting complete network transparency
879 * An integrated help system allowing for convenient, consistent access to help on the use of the **KDE** desktop and its applications
881 * Consistent look and feel of all **KDE** applications
883 * Standardized menu and toolbars, keybindings, color-schemes, etc.
885 * Internationalization: **KDE** is available in more than 40 languages
887 * Centralized consisted dialog driven desktop configuration
889 * A great number of useful **KDE** applications
891 **KDE** comes with a web browser called **Konqueror** , which represents a solid competitor to other existing web browsers on UNIX® systems. More information on **KDE** can be found on the [KDE website](http://www.kde.org/).
898 Just as with **GNOME** or any other desktop environment, the easiest way to install **KDE** is through the pkgsrc framework or from a package:
902 To install the **KDE** package from the network, simply type:
906 or if you prefer the newer **KDE 4**, type:
910 [pkg_radd(1)](http://leaf.dragonflybsd.org/cgi/web-man?command#pkg_radd§ion1) will automatically fetch the latest version of the application.
913 To build **KDE** from source, use the pkgsrc framework:
915 # cd /usr/pkgsrc/meta-pkgs/kde3
917 # bmake install clean
923 After **KDE** has been installed, the X server must be told to launch this application instead of the default window manager. This is accomplished by editing the `.xinitrc` file:
926 % echo "exec startkde" > ~/.xinitrc
929 Now, whenever the X Window System is invoked with `startx`, **KDE** will be the desktop.
931 If a display manager such as **XDM** is being used, the configuration is slightly different. Edit the `.xsession` file instead. Instructions for **kdm** are described later in this chapter.
935 #### More Details on KDE
939 Now that **KDE** is installed on the system, most things can be discovered through the help pages, or just by pointing and clicking at various menus. Windows® or Mac® users will feel quite at home.
941 The best reference for **KDE** is the on-line documentation. **KDE** comes with its own web browser, **Konqueror** , dozens of useful applications, and extensive documentation. The remainder of this section discusses the technical items that are difficult to learn by random exploration.
945 #### The KDE Display Manager
949 An administrator of a multi-user system may wish to have a graphical login screen to welcome users. [ XDM](x-xdm.html) can be used, as described earlier. However, **KDE** includes an alternative, **kdm** , which is designed to look more attractive and include more login-time options. In particular, users can easily choose (via a menu) which desktop environment ( **KDE** , **GNOME** , or something else) to run after logging on.
953 To enable **kdm** , the `ttyv8` entry in `/etc/ttys` has to be adapted. The line should look as follows:
956 ttyv8 "/usr/pkg/bin/kdm -nodaemon" xterm on secure
967 **XFce** is a desktop environment based on the GTK+ toolkit used by **GNOME** , but is much more lightweight and meant for those who want a simple, efficient desktop which is nevertheless easy to use and configure. Visually, it looks very much like **CDE** , found on commercial UNIX systems. Some of **XFce** 's features are:
969 * A simple, easy-to-handle desktop
971 * Fully configurable via mouse, with drag and drop, etc
973 * Main panel similar to **CDE** , with menus, applets and applications launchers
975 * Integrated window manager, file manager, sound manager, **GNOME** compliance module, and other things
977 * Themeable (since it uses GTK+)
979 * Fast, light and efficient: ideal for older/slower machines or machines with memory limitations
982 More information on **XFce** can be found on the [XFce website](http://www.xfce.org/).
990 A binary package for **XFce** exists. To install, simply type:
995 Alternatively, to build from source, use the pkgsrc framework:
999 # cd /usr/pkgsrc/meta-pkgs/xfce4
1001 # bmake install clean
1006 Now, tell the X server to launch **XFce** the next time X is started. Simply type this:
1008 % echo "/usr/pkg/bin/startxfce4" > ~/.xinitrc
1012 The next time X is started, **XFce** will be the desktop. As before, if a display manager like **XDM** is being used, create an `.xsession`, as described in the section on [ GNOME](x11-wm.html#X11-WM-GNOME), but with the `/usr/pkg/bin/startxfce4` command; or, configure the display manager to allow choosing a desktop at login time, as explained in the section on [ kdm](x11-wm.html#X11-WM-KDE-KDM).
1016 <!-- XXX: FreeBSD's handbook has a nice user-oriented section about X applications here. maybe we should have one, too -->