1 # Installing Applications using NetBSD's pkgsrc framework
4 <!-- XXX: possibly also mention pkgin and other fancy stuff. -->
8 ## Overview of Software Installation
10 If you have used a UNIX® system before you will know that the typical procedure for installing third party software goes something like this:
13 1. Download the software, which might be distributed in source code format, or as a binary.
15 1. Unpack the software from its distribution format (typically a tarball compressed with [compress(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=compress§ion1), [gzip(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=gzip§ion=1), or [bzip2(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=bzip2§ion=1)).
17 1. Locate the documentation (perhaps an `INSTALL` or `README` file, or some files in a `doc/` subdirectory) and read up on how to install the software.
19 1. If the software was distributed in source format, compile it. This may involve editing a `Makefile`, or running a `configure` script, and other work.
21 1. Test and install the software.
24 And that is only if everything goes well. If you are installing a software package that was not deliberately ported to DragonFly you may even have to go in and edit the code to make it work properly. Should you want to, you can continue to install software the ***traditional*** way with DragonFly. However, DragonFly provides technology from NetBSD, which can save you a lot of effort: pkgsrc. At the time of writing, over 8,000 third party applications have been made available in this way.
27 For any given application, the DragonFly Binary package for that application is a single file which you must download. The package contains pre-compiled copies of all the commands for the application, as well as any configuration files or documentation. A downloaded package file can be manipulated with DragonFly package management commands, such as [pkg_radd(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=pkg_add§ion1), [pkg_delete(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=pkg_delete§ion=1), [pkg_info(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=pkg_info§ion=1), and so on. Installing a new application can be carried out with a single command.
31 In addition the pkgsrc collection supplies a collection of files designed to automate the process of compiling an application from source code. Remember that there are a number of steps you would normally carry out if you compiled a program yourself (downloading, unpacking, patching, compiling, installing). The files that make up a pkgsrc source collection contain all the necessary information to allow the system to do this for you. You run a handful of simple commands and the source code for the application is automatically downloaded, extracted, patched, compiled, and installed for you. In fact, the pkgsrc source subsystem can also be used to generate packages which can later be manipulated with `pkg_add` and the other package management commands that will be introduced shortly.
34 Pkgsrc understands ***dependencies***. Suppose you want to install an application that depends on a specific library being installed. Both the application and the library have been made available through the pkgsrc collection. If you use the `pkg_add` command or the pkgsrc subsystem to add the application, both will notice that the library has not been installed, and automatically install the library first. You might be wondering why pkgsrc® bothers with both. Binary packages and the source tree both have their own strengths, and which one you use will depend on your own preference.
38 **Binary Package Benefits**
43 * A compressed package tarball is typically smaller than the compressed tarball containing the source code for the application.
46 * Packages do not require any additional compilation. For large applications, such as ***Mozilla***, ***KDE***, or ***GNOME*** this can be important, particularly if you are on a slow system.
49 * Packages do not require any understanding of the process involved in compiling software on DragonFly.
53 **Pkgsrc source Benefits**
58 * Binary packages are normally compiled with conservative options, because they have to run on the maximum number of systems. By installing from the source, you can tweak the compilation options to (for example) generate code that is specific to a Pentium IV or Athlon processor.
61 * Some applications have compile time options relating to what they can and cannot do. For example, <i>Apache</i> can be configured with a wide variety of different built-in options. By building from the source you do not have to accept the default options, and can set them yourself. In some cases, multiple packages will exist for the same application to specify certain settings. For example, <i>vim</i> is available as a `vim` package and a `vim-gtk` package, depending on whether you have installed an X11 server. This sort of rough tweaking is possible with packages, but rapidly becomes impossible if an application has more than one or two different compile time options.
64 * The licensing conditions of some software distributions forbid binary distribution. They must be distributed as source code.
67 * Some people do not trust binary distributions. With source code, it is possible to check for any vulnerabilities built into the program before installing it to an otherwise secure system. Few people perform this much review, however.
70 * If you have local patches, you will need the source in order to apply them.
73 * Some people like having code around, so they can read it if they get bored, hack it, borrow from it (license permitting, of course), and so on.
77 To keep track of updated pkgsrc releases subscribe to the [NetBSD pkgsrc users mailing list](http://www.netbsd.org/MailingLists/pkgsrc-users) and the [NetBSD pkgsrc users mailing list](http://www.netbsd.org/MailingLists/tech-pkgsrc). It's also useful to watch the [DragonFly User related mailing list](http://leaf.dragonflybsd.org/mailarchive/) as errors with pkgsrc on DragonFly should be reported there.
81 **Warning:** Before installing any application, you should check http://www.pkgsrc.org/ for security issues related to your application.
85 Audit-packages will automatically check all installed applications for known vulnerabilities, a check will be also performed before any application build. Meanwhile, you can use the command `audit-packages -d` after you have installed some packages.
90 ## Finding Your Application
94 Before you can install any applications you need to know what you want, and what the application is called. DragonFly's list of available applications is growing all the time. Fortunately, there are a number of ways to find what you want:
96 Since DragonFly 1.11 [pkg_search(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=pkg_search§ion1) is included in the base system. [pkg_search(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=pkg_search§ion=1) searches an already installed pkgsrc® INDEX for for a given package name. If pkgsrc® is not installed or the INDEX file is missing, it fetches the [pkg_summary(5)](http://leaf.dragonflybsd.org/cgi/web-man?command=pkg_summary§ion=5) file.
98 **Example. Find a Package**
101 fvwm-2.4.20nb1 Newer version of X11 Virtual window manager
102 fvwm-2.5.24 Development version of X11 Virtual window manager
103 fvwm-themes-0.6.2nb8 Configuration framework for fvwm2 with samples
104 fvwm-wharf-1.0nb1 Copy of AfterStep's Wharf compatible with fvwm2
105 fvwm1-1.24rnb1 Virtual window manager for X
109 # pkg_search -v fvwm-2.5
110 Name : fvwm-2.5.24-50
112 Desc : Development version of X11 Virtual window manager
114 Deps : perl>#5.0 gettext-lib>0.14.5 png>=1.2.4 libXext>=0.99.0 libX11>=1.1 libXau>=1.0 libXdmcp>=0.99 libX11>=0.99 libXft>=2.1.10 fontconfig>=2.2 freetype2>=2.1.8
115 freetype2>=2.1.3 expat>=1.95.7 expat>=1.95.4 freetype2>=2.1.10nb1 expat>=2.0.0nb1 fontconfig>=2.4.2 fontconfig>=2.1nb2 libXrender>=0.9.2 libXpm>=3.5.4.2 libXt>=1.0.0
116 libSM>=0.99.2 libICE>=0.99.1 png>=1.2.9nb2
119 To get more verbose information about a package (dependencies, path in `/usr/pkgsrc`, Description) use the `-v` switch.
121 There is a pkgsrc® related web site that maintains an up-to-date searchable list of all the available applications, at [http://pkgsrc.se](http://pkgsrc.se). The packages and the corresponding source tree are divided into categories, and you may either search for an application by name (if you know it), or see all the applications available in a category.
123 ## Get the description of a package
125 To get a more verbose description of the package use pkg_search's `-s` switch with the exact package name (e.g. as given by a normal query):
127 # pkg_search -s fvwm-2.5.24
128 Fvwm is a very famous window manager for X, which provides a
129 virtual/multiple disjoint desktop, a 3-D look for windows decorations,
130 shaped/color icons. It gives a very good emulation of mwm. A nice
131 button-bar can be used to provide convenient access to frequently used
132 functions or programs.
134 This package is based on the unstable 2.5.x series of fvwm. Do not
135 use it unless comfortable running beta software.
138 **Note:** To use the `-s` switch you need a complete pkgsrc tree installed.
142 ## Using the Binary Packages System
144 ***DragonFly customizations contributed by Chern Lee and Adrian Nida. ***
148 ### Installing a Binary Package
150 You can use the [pkg_add(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=pkg_add§ion=1) utility to install a pkgsrc® software package from a local file or from a server on the network.
152 The [pkg_radd(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=pkg_radd§ion=1) tool conveniently fetches and installs the requested package from one of DragonFly's pkg servers without having to know the full URL to it.
154 <!-- XXX: put in pkg_radd example, it's more meaningful; also check the url below (ftp.pkgsrc-box.org) -->
157 Binary package files are distributed in `.tgz` formats. You can find them at the default location ftp://ftp.pkgsrc-box.org/packages/, among other sites. The layout of the packages is similar to that of the `/usr/pkgsrc` tree. Each category has its own directory, and every package can be found within the `All` directory.
161 The directory structure of the binary package system matches the source tree layout; they work with each other to form the entire package system.
165 Since DragonFly 1.11 you can use [pkg_radd(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=pkg_radd§ion=1) to install binary packages without having to set `PACKAGESITE` or providing the complete URL. [pkg_radd(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=pkg_radd§ion=1) will handle that for you:
173 ### Dealing with different package versions
175 Due to the fact that the official packages are only build for the RELEASE-Version of DragonFly, it is possible that you see a warning when installing binary packages on a DEVELOPMENT-version of DragonFly. The warning could look like this:
177 pkg_add: Warning: package `vim-gtk2-7.1.116.tgz' was built for a different version of the OS:
178 pkg_add: DragonFly/i386 1.10.1 (pkg) vs. DragonFly/i386 1.11.0 (this host)
180 You can safely ignore this warning. Normally all packages build for RELEASE run fine on DEVELOPMENT unless a major API-breakage was introduced. In this case you would see a message from the developers on the appropriate mailing list.
182 ### Managing Packages
184 [pkg_info(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=pkg_info§ion=1) is a utility that lists and describes the various packages installed.
189 digest-20050731 Message digest wrapper utility
190 screen-4.0.2nb4 Multi-screen window manager
193 [pkg_version(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=pkg_version§ion=1) is a utility that summarizes the versions of all installed packages. It compares the package version to the current version found in the ports tree.
195 ### Deleting a Package
197 To remove a previously installed software package, use the [pkg_delete(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=pkg_delete§ion=1) utility.
200 # pkg_delete screen-4.0.3.tgz
204 All package information is stored within the `/var/db/pkg` directory. The installed file list and descriptions of each package can be found within subdirectories of this directory.
208 ## Using the pkgsrc® Source Tree
210 The following sections provide basic instructions on using the pkgsrc source tree to install or remove programs from your system.
212 ### Obtaining the pkgsrc Source Tree
214 Before you can install pkgsrc® packages from source, you must first obtain the pkgsrc source tree--which is essentially a set of `Makefiles`, patches, and description files placed in `/usr/pkgsrc`.
218 The primary method to obtain and keep your pkgsrc collection up to date is by using **CVS**. This is a quick method for getting the pkgsrc collection using **CVS** .
223 # cvs -d anoncvs@anoncvs.us.netbsd.org:/cvsroot co pkgsrc
226 Running the following command later will download and apply all the recent changes to your source tree.
232 #### The DragonFly Way
234 As of the 1.10 release, you can use the `/usr/Makefile` to checkout & update the pkgsrc tree quickly.
242 to checkout from git repository, or
248 to update. **NOTE**: If you use CVS instead of git please do edit the Makefile to use an appropriately speedy CVS mirror for your location and to reduce load on the main pkgsrc CVS server.
250 ## Installing Packages from Source
252 The first thing that should be explained when it comes to the source tree is what is actually meant by a ***skeleton***. In a nutshell, a source skeleton is a minimal set of files that tell your DragonFly system how to cleanly compile and install a program. Each source skeleton should include:
254 * A `Makefile`. The `Makefile` contains various statements that specify how the application should be compiled and where it should be installed on your system.
257 * A `distinfo` file. This file contains information about the files that must be downloaded to build the port and their checksums, to verify that files have not been corrupted during the download using [md5(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=md5§ion=1).
260 * A `files` directory. This directory contains the application specific files that are needed for the programs appropriate run-time configuration.
262 This directory may also contain other files used to build the port.
265 * A `patches` directory. This directory contains patches to make the program compile and install on your DragonFly system. Patches are basically small files that specify changes to particular files. They are in plain text format, and basically say <i>Remove line 10</i> or <i>Change line 26 to this ...</i>. Patches are also known as <i>diffs</i> because they are generated by the [diff(1)](http://leaf.dragonflybsd.org/cgi/web-man?command#diff§ion1) program.
268 * A `DESCR` file. This is a more detailed, often multiple-line, description of the program.
271 * A `PLIST` file. This is a list of all the files that will be installed by the port. It also tells the pkgsrc system what files to remove upon deinstallation.
275 Some pkgsrc source skeletons have other files, such as `MESSAGE`. The pkgsrc system uses these files to handle special situations. If you want more details on these files, and on pkgsrc in general, check out [The pkgsrc guide](http://www.netbsd.org/Documentation/pkgsrc/), available at the [NetBSD website](http://www.netbsd.org/).
279 Now that you have enough background information to know what the pkgsrc source tree is used for, you are ready to install your first compiled package. There are two ways this can be done, and each is explained below.
281 Another way to find a particular source tree is by using the pkgsrc collection's built-in search mechanism. To use the search feature, you will need to be in the `/usr/pkgsrc` directory. Once in that directory, run `bmake search key=program-name` where `program-name` is the name of the program you want to find. This searches packages names, comments, descriptions and dependencies and can be used to find packages which relate to a particular subject if you don't know the name of the program you are looking for. For example, if you were looking for `apache2`:
285 # bmake search key="apache2"
286 Extracting complete dependency database. This may take a while...
287 ....................................................................................................
289 ....................................................................................................
293 ....................................................................................................
295 .................................................................................................Reading database file
296 Flattening dependencies
297 Flattening build dependencies
298 Generating INDEX file
299 Indexed 5999 packages
303 Info: Apache HTTP (Web) server, version 2
304 Maint: tron@NetBSD.org
306 B-deps: perl>#5.0 apr-util>1.2.8 apr>=1.2.8 libtool-base>=1.5.22nb1 pkg-config>=0.19 expat>=1.95.7 gmake>=3.78 gettext-lib>=0.14.5
307 {gettext-tools>=0.14.5,gettext>=0.10.36<0.14.5} expat>=1.95.4 expat>=2.0.0nb1 apr-util>=1.2.8nb1
308 R-deps: perl>#5.0 apr-util>1.2.8 apr>=1.2.8 expat>=1.95.7 expat>=1.95.4 expat>=2.0.0nb1 apr-util>=1.2.8nb1
312 The part of the output you want to pay particular attention to is the <i>Path</i> line, since that tells you where to find the source tree for the requested application. The other information provided is not needed in order to install the package, so it will not be covered here.
314 The search string is case-insensitive. Searching for <i>APACHE</i> will yield the same results as searching for <i>apache</i>.
318 **Note:** It should be noted that <i>Extracting [the] complete dependency database</i> does indeed take a while.
322 **Note:** You must be logged in as `root` to install packages.
326 Now that you have found an application you would like to install, you are ready to do the actual installation. The source package includes instructions on how to build source code, but does not include the actual source code. You can get the source code from a CD-ROM or from the Internet. Source code is distributed in whatever manner the software author desires. Frequently this is a tarred and gzipped file, but it might be compressed with some other tool or even uncompressed. The program source code, whatever form it comes in, is called a ***distfile***. You can get the distfile from a CD-ROM or from the Internet.
330 **Warning:** Before installing any application, you should be sure to have an up-to-date source tree and you should check http://www.pkgsrc.org/ for security issues related to your port.
333 A security vulnerabilities check can be automatically done by **audit-packages** before any new application installation. This tool can be found in the pkgsrc collection ([security/audit-packages](http://pkgsrc.se/security/audit-packages)). Consider running `auditpackages -d` before installing a new package, to fetch the current vulnerabilities database. A security audit and an update of the database will be performed during the daily security system check. For more informations read the audit-packages and [periodic(8)](http://leaf.dragonflybsd.org/cgi/web-man?command#periodic§ion8) manual pages.
337 **Note:** It should be noted that the current setup of DragonFly requires the use of `bmake` instead of `make`. This is because the current version of make on DragonFly does not support all the parameters that NetBSD's does.
341 **Note:** You can save an extra step by just running `bmake install` instead of `bmake` and `bmake install` as two separate steps.
345 **Note:** Some shells keep a cache of the commands that are available in the directories listed in the `PATH` environment variable, to speed up lookup operations for the executable file of these commands. If you are using one of these shells, you might have to use the `rehash` command after installing a package, before the newly installed commands can be used. This is true for both shells that are part of the base-system (such as `tcsh`) and shells that are available as packages (for instance, [shells/zsh](http://pkgsrc.se/shells/zsh)).
347 <!-- XXX: mention the stuff about the pkgsrc security audit thingie -->
350 ### Installing Packages from the Internet
352 As with the last section, this section makes an assumption that you have a working Internet connection. If you do not, you will need to put a copy of the distfile into `/usr/pkgsrc/distfiles` manually. Installing a package from the Internet is done exactly the same way as it would be if you already had the distfile. The only difference between the two is that the distfile is downloaded from the Internet on demand.
355 Here are the steps involved:
358 # cd /usr/pkgsrc/chat/ircII
359 # bmake install clean
360 => ircii-20040820.tar.bz2 doesn't seem to exist on this system.
361 => Attempting to fetch ircii-20040820.tar.bz2 from ftp://ircii.warped.com/pub/ircII/.
363 [FTP transfer snipped]
364 150 Opening BINARY mode data connection for 'ircii-20040820.tar.bz2' (559843 bytes).
365 100% |***************************************| 550 KB 110.34 KB/s 00:00 ETA
366 226 Transfer complete.
367 [FTP transfer snipped]
368 221 Thank you for using the FTP service on bungi.sjc.warped.net.
369 => Checksum SHA1 OK for ircii-20040820.tar.bz2.
370 => Checksum RMD160 OK for ircii-20040820.tar.bz2.
371 work -> /usr/obj/pkgsrc/chat/ircII/work
372 ##=> Extracting for ircII-20040820
373 #########################################################################=
374 The supported build options for this package are:
378 You can select which build options to use by setting PKG_DEFAULT_OPTIONS
379 or the following variable. Its current value is shown:
382 PKG_OPTIONS.ircII (not defined)
384 #########################################################################=
385 #########################################################################=
386 The following variables will affect the build process of this package,
387 ircII-20040820. Their current value is shown below:
391 You may want to abort the process now with CTRL-C and change their value
392 before continuing. Be sure to run `/usr/pkg/bin/bmake clean' after
394 #########################################################################=
395 ##=> Patching for ircII-20040820
396 ##=> Applying pkgsrc patches for ircII-20040820
397 ##=> Overriding tools for ircII-20040820
398 ##=> Creating toolchain wrappers for ircII-20040820
399 ##=> Configuring for ircII-20040820
401 [configure output snipped]
403 ##=> Building for ircII-20040820
405 [compilation output snipped]
407 ##=> Installing for ircII-20040820
409 [installation output snipped]
411 ##=> [Automatic manual page handling]
412 ##=> Registering installation for ircII-20040820
413 ##=> Cleaning for ircII-20040820
418 <!-- XXX: mention /usr/pkg/etc/mk.conf for options, etc -->
420 As you can see, the only difference are the lines that tell you where the system is fetching the package's distfile from.
424 The pkgsrc system uses [ftp(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=ftp§ion=1) to download the files, which honors various environment variables, including `FTP_PASSIVE_MODE`, `FTP_PROXY`, and `FTP_PASSWORD`. You may need to set one or more of these if you are behind a firewall, or need to use an FTP/HTTP proxy. See [ftp(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=ftp§ion=1) for the complete list.
428 For users which cannot be connected all the time, the `bmake fetch` option is provided. Just run this command at the top level directory (`/usr/pkgsrc`) and the required files will be downloaded for you. This command will also work in the lower level categories, for example: `/usr/pkgsrc/net`. Note that if a package depends on libraries or other packages this will ***not*** fetch the distfiles of those packages as well.
432 **Note:** You can build all the packages in a category or as a whole by running `bmake` in the top level directory, just like the aforementioned `bmake `fetch*** method. This is dangerous, however, as some applications cannot co-exist. In other cases, some packages can install two different files with the same filename.
436 In some rare cases, users may need to acquire the tarballs from a site other than the `MASTER_SITES` (the location where files are downloaded from). You can override the `MASTER_SORT`, `MASTER_SORT_REGEX` and `INET_COUNTRY` options either within the `/etc/mk.conf`.
440 **Note:** Some packages allow (or even require) you to provide build options which can enable/disable parts of the application which are unneeded, certain security options, and other customizations. A few which come to mind are [`www/mozilla`](http://pkgsrc.se/www/mozilla), [`security/gpgme`](http://pkgsrc.se/security/gpgme), and [`mail/sylpheed-claws`](http://pkgsrc.se/mail/sylpheed-claws). To find out what build options the application you are installing requires type:
452 To change the build process, either change the values of PKG_DEFAULT_OPTIONS or PKG_OPTIONS.`***PackageName***` in `/etc/mk.conf` or on the commandline as so:
458 # bmake PKG_OPTIONS.ircII="-ssl"
464 An option is enabled if listed. It is disabled if it is prefixed by a minus sign.
468 #### Dealing with imake
472 Some applications that use `imake` (a part of the X Window System) do not work well with `PREFIX`, and will insist on installing under `/usr/X11R6`. Similarly, some Perl ports ignore `PREFIX` and install in the Perl tree. Making these applications respect `PREFIX` is a difficult or impossible job.
476 ### Removing Installed Packages
480 Now that you know how to install packages, you are probably wondering how to remove them, just in case you install one and later on decide that you installed the wrong program. We will remove our previous example (which was `ircII` for those of you not paying attention). As with installing packages, the first thing you must do is change to the package directory, `/usr/pkgsrc/chat/ircII`. After you change directories, you are ready to uninstall `ircII`. This is done with the `bmake deinstall` command:
484 # cd /usr/pkgsrc/chat/ircII
486 ##=> Deinstalling for ircII-20040820
489 That was easy enough. You have removed `ircII` from your system. If you would like to reinstall it, you can do so by running `bmake reinstall` from the `/usr/pkgsrc/chat/ircII` directory.
493 The `bmake deinstall` and `bmake reinstall` sequence does not work once you have run `bmake clean`. If you want to deinstall a package after cleaning, use [pkg_delete(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=pkg_delete§ion=1) as discussed in the [pkgsrc-using.html Pkgsrc section of the Handbook].
497 ### Packages and Disk Space
501 Using the pkgsrc collection can definitely eat up your disk space. For this reason you should always remember to clean up the work directories using `bmake clean`. This will remove the `work` directory after a package has been built, and installed. You can also remove the tar files from the `distfiles` directory, and remove the installed package when their use has delimited.
505 ### Upgrading Packages
508 **Note:** Once you have updated your pkgsrc collection, before attempting a package upgrade, you should check the `/usr/pkgsrc/UPDATING` file. This file describes various issues and additional steps users may encounter and need to perform when updating a port.
510 There are multiple ways to upgrade your installed packages.
514 Keeping your packages up to date can be a tedious job. For instance, to upgrade a package you would go to the package directory, build the package, deinstall the old package , install the new package, and then clean up after the build. Imagine doing that for five packages, tedious right? This was a large problem for system administrators to deal with, and now we have utilities which do this for us. For instance the `pkg_chk` utility will do everything for you!
516 **Using `pkg_chk` utility:**
518 pkg_chk requires a few steps in order to work correctly. They are listed here.
520 # pkg_chk -g # make initial list of installed packages
521 # pkg_chk -r # remove all packages that are not up to date and packages that depend on them
522 # pkg_chk -a # install all missing packages (use binary packages, this is the default
523 # pkg_chk -as # install all missing packages (build from source)
525 The above process removes all packages at once and installs the missing packages one by one.This can cause longer disruption of services when the removed package has to wait a long time for its turn to get installed.
527 **Using `pkg_rolling-replace` utility:**
529 "pkg_rolling-replace" replaces packages one by one and one can use it for a better way of package management. You can install "pkg_rolling-replace" by the following procedure.
531 # cd /usr/pkgsrc/pkgtools/pkg_rolling-replace/
534 Once pkg_rolling-replace is installed you can update the packages through the following steps.
536 # cd /usr && make pkgsrc-update
537 # pkg_rolling-replace -u
539 If some package like "bmake" does not get updated and throws an error during the above steps you can update it manually.
540 Inside the packages directory (/usr/pkgsrc/devel/bmake in this case)
542 # env USE_DESTDIR=full bmake package
543 # bmake clean-depends clean
545 And Go to the packages directory and install the binary package with
547 # pkg_add -u <pkg_name> (i.e. the name of the .tgz file).
549 **Using `pkgin` utility:**
551 You can also use "pkgin" to update software using binary packages just like apt or yum.
553 # cd /usr/pkgsrc/pkgtools/pkgin/
556 Once "pkgin" is installed edit "/usr/pkg/etc/pkgin/repositories.conf" to contain the line ( for i386 packages ).
558 http://avalon.dragonflybsd.org/packages/i386/DragonFly-2.5/stable/All
560 Then you can run the following commands to get the packages updated.
567 ## Post-installation Activities
571 After installing a new application you will normally want to read any documentation it may have included, edit any configuration files that are required, ensure that the application starts at boot time (if it is a daemon), and so on.
575 The exact steps you need to take to configure each application will obviously be different. However, if you have just installed a new application and are wondering ***What now?*** these tips might help:
580 Use [pkg_info(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=pkg_info§ion=1) to find out which files were installed, and where. For example, if you have just installed Foo_Package version 1.0.0, then this command
582 # pkg_info -L foopackage-1.0.0 | less
584 will show all the files installed by the package. Pay special attention to files in `man/` directories, which will be manual pages, `etc/` directories, which will be configuration files, and `doc/`, which will be more comprehensive documentation. If you are not sure which version of the application was just installed, a command like this
588 pkg_info | grep -i foopackage
591 will find all the installed packages that have <i>foopackage</i> in the package name. Replace <i>foopackage</i> in your command line as necessary.
594 Once you have identified where the application's manual pages have been installed, review them using [man(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=man§ion=1). Similarly, look over the sample configuration files, and any additional documentation that may have been provided.
597 If the application has a web site, check it for additional documentation, frequently asked questions, and so forth. If you are not sure of the web site address it may be listed in the output from
601 # pkg_info foopackage-1.0.0
604 A `WWW:` line, if present, should provide a URL for the application's web site.
607 Packages that should start at boot (such as Internet servers) will usually install a sample script in `/usr/pkg/etc/rc.d`. You should review this script for correctness and edit or rename it if needed.
614 ## Dealing with Broken Packages
618 If you come across a package that does not work for you, there are a few things you can do, including:
622 1. Fix it! The [pkgsrc Guide](http://www.netbsd.org/Documentation/pkgsrc/) includes detailed information on the ***pkgsrc®*** infrastructure so that you can fix the occasional broken package or even submit your own!
624 1. Gripe--***by email only***! Send email to the maintainer of the package first. Type `bmake maintainer` or read the `Makefile` to find the maintainer's email address. Remember to include the name and version of the port (send the `$NetBSD:` line from the `Makefile`) and the output leading up to the error when you email the maintainer. If you do not get a response from the maintainer, you can try [users](http://leaf.dragonflybsd.org/mailarchive/) .
626 1. Grab the package from an FTP site near you. The ***master*** package collection is on `packages.stura.uni-rostock.de` in the [All directory](ftp://packages.stura.uni-rostock.de/pkgsrc-current/DragonFly/RELEASE/i386/All/). These are more likely to work than trying to compile from source and are a lot faster as well. Use the [pkg_add(1)](http://leaf.dragonflybsd.org/cgi/web-man?command=pkg_add§ion=1) program to install the package on your system.