1 DragonFly 2.4.1-RELEASE DragonFly v2.4.1-RELEASE #4: Wed Sep 30 20:07:33 PDT 2009 root@test28.backplane.com:/usr/obj/usr/src-misc/sys/DFLYLIVE i386
4 0. edit ACPI /boot/loader.conf
6 debug.acpi.disabled="sysresource"
11 4. scannerdriver (canon lide not even works with linux sane)
12 5. phone harmonizations
16 hostb0@pci0:0:0:0: class=0x060000 card=0x01fe1028 chip=0x2a008086 rev=0x0c hdr=0x00
17 vendor = 'Intel Corporation'
18 device = 'Mobile PM965/GM965/GL960 Express Processor to DRAM Controller'
21 pcib1@pci0:0:1:0: class=0x060400 card=0x01fe1028 chip=0x2a018086 rev=0x0c hdr=0x01
22 vendor = 'Intel Corporation'
23 device = 'Mobile PM965/GM965/GL960 Express PCIe Root Port'
26 uhci0@pci0:0:26:0: class=0x0c0300 card=0x01fe1028 chip=0x28348086 rev=0x02 hdr=0x00
27 vendor = 'Intel Corporation'
28 device = '82801H (ICH8 Family) USB UHCI'
31 uhci1@pci0:0:26:1: class=0x0c0300 card=0x01fe1028 chip=0x28358086 rev=0x02 hdr=0x00
32 vendor = 'Intel Corporation'
33 device = '82801H (ICH8 Family) USB UHCI'
36 none0@pci0:0:26:7: class=0x0c0320 card=0x01fe1028 chip=0x283a8086 rev=0x02 hdr=0x00
37 vendor = 'Intel Corporation'
38 device = '81EC1043 (?) ICH8 Enhanced USB2 Enhanced Host Controller'
41 none1@pci0:0:27:0: class=0x040300 card=0x01fe1028 chip=0x284b8086 rev=0x02 hdr=0x00
42 vendor = 'Intel Corporation'
43 device = '82801H Intel audio controller embedded with the 82801H chipset ( ICH8 chipset )'
46 pcib2@pci0:0:28:0: class=0x060400 card=0x01fe1028 chip=0x283f8086 rev=0x02 hdr=0x01
47 vendor = 'Intel Corporation'
48 device = '82801H (ICH8 Family) PCIe Port 1'
51 pcib3@pci0:0:28:1: class=0x060400 card=0x01fe1028 chip=0x28418086 rev=0x02 hdr=0x01
52 vendor = 'Intel Corporation'
53 device = '82801H (ICH8 Family) PCIe Port 2'
56 pcib4@pci0:0:28:3: class=0x060400 card=0x01fe1028 chip=0x28458086 rev=0x02 hdr=0x01
57 vendor = 'Intel Corporation'
58 device = '82801H (ICH8 Family) PCIe Port 4'
61 pcib5@pci0:0:28:5: class=0x060400 card=0x01fe1028 chip=0x28498086 rev=0x02 hdr=0x01
62 vendor = 'Intel Corporation'
63 device = '82801H (ICH8 Family) PCIe Port 6'
66 uhci2@pci0:0:29:0: class=0x0c0300 card=0x01fe1028 chip=0x28308086 rev=0x02 hdr=0x00
67 vendor = 'Intel Corporation'
68 device = '82801H (ICH8 Family) USB UHCI'
71 uhci3@pci0:0:29:1: class=0x0c0300 card=0x01fe1028 chip=0x28318086 rev=0x02 hdr=0x00
72 vendor = 'Intel Corporation'
73 device = '82801H (ICH8 Family) USB UHCI'
76 uhci4@pci0:0:29:2: class=0x0c0300 card=0x01fe1028 chip=0x28328086 rev=0x02 hdr=0x00
77 vendor = 'Intel Corporation'
78 device = '82801H (ICH8 Family) USB UHCI'
81 none2@pci0:0:29:7: class=0x0c0320 card=0x01fe1028 chip=0x28368086 rev=0x02 hdr=0x00
82 vendor = 'Intel Corporation'
83 device = '82801H (ICH8 Family) USB2 EHCI'
86 pcib6@pci0:0:30:0: class=0x060401 card=0x01fe1028 chip=0x24488086 rev=0xf2 hdr=0x01
87 vendor = 'Intel Corporation'
88 device = '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to PCI Bridge'
91 isab0@pci0:0:31:0: class=0x060100 card=0x01fe1028 chip=0x28158086 rev=0x02 hdr=0x00
92 vendor = 'Intel Corporation'
93 device = '82801HEM (ICH8M-E) LPC Interface Controller'
96 atapci0@pci0:0:31:1: class=0x01018a card=0x01fe1028 chip=0x28508086 rev=0x02 hdr=0x00
97 vendor = 'Intel Corporation'
98 device = '82801H (ICH8 Family) Ultra ATA Storage Controllers'
101 atapci1@pci0:0:31:2: class=0x01018f card=0x01fe1028 chip=0x28288086 rev=0x02 hdr=0x00
102 vendor = 'Intel Corporation'
103 device = '82801 (ICH8M) 3 port SATA Controller'
106 none3@pci0:0:31:3: class=0x0c0500 card=0x01fe1028 chip=0x283e8086 rev=0x02 hdr=0x00
107 vendor = 'Intel Corporation'
108 device = '82801H (ICH8 Family) SMBus Controller'
111 vgapci0@pci0:1:0:0: class=0x030000 card=0x01fe1028 chip=0x042910de rev=0xa1 hdr=0x00
112 vendor = 'Nvidia Corp'
113 device = 'Unknown nVidia Quadro NVS 135M or Quadro NVS 140M'
116 none4@pci0:12:0:0: class=0x028000 card=0x000a1028 chip=0x432814e4 rev=0x03 hdr=0x00
117 vendor = 'Broadcom Corporation'
118 device = 'BCM4321KFBG Broadcom 432AGN 802.11a/b/g/draft-n Wi-Fi Solution'
120 bge0@pci0:9:0:0: class=0x020000 card=0x01fe1028 chip=0x167314e4 rev=0x02 hdr=0x00
121 vendor = 'Broadcom Corporation'
122 device = 'NetXtreme BCM5755M Gigabit Ethernet PCIe'
125 cbb0@pci0:3:1:0: class=0x060700 card=0x01fe1028 chip=0x71351217 rev=0x21 hdr=0x02
126 vendor = 'O2 Micro Inc'
127 device = 'OZ711EZ1 MemoryCardBus Controller'
129 subclass = PCI-CardBus
130 fwohci0@pci0:3:1:4: class=0x0c0010 card=0x01fe1028 chip=0x00f71217 rev=0x02 hdr=0x00
131 vendor = 'O2 Micro Inc'
132 device = '0x00f71217 1394 Open Host Controller Interface'
137 default 2.4.1 (1) bootoutput live and/or installed:
139 sio2: can't drain, serial port might not exist, disabling
140 ppc0:parallel port not found (blocked, catatonic, won't respond....)
141 boot option 2 (ACPI disabled) gets along rather perfect til:
144 bge0: no carrier.......
146 ...via switch.2716 all is go, network still manually must patchthrough.
148 main thing compatibilize dell powerconnect switch 2716, straght ethernet cabling ok, boot to linux then via switch works, tried dlfy command ifconfig 0.0.0.0 bge0 up still no carrier via switch though as single client no problem, mostly very impressive results, tripleboot ubuntu karmic, mandriva, dfly ok, mostly learning this and peripherals compatibilizations:
152 device = 'Mobile PM965&GM965&GL960 to DRAM'
156 device = 'Mobile PM965&GM965&GL960 to DRAM'
160 device = '82801H ICH8 USB'
166 device = 'Unknown nVidia Quadro NVS 135M or Quadro NVS 140M'
169 vendor= 'Broadcom Corporation'
170 device = 'BCM4321KFBG Broadcom 432AGM 802.11a Wi/Fi'
172 vendor= 'Broadcom Corporation'
173 device = 'NetXtreme BCM5755M Gigabit Ethernet PCIe'
176 cbb@pci3:1:0: class=0x060700 card=0x01fe1028 chip=0x71351217 rev=0x21 hdr=0x02
177 . ..cardbus irrelevance...
179 serial ports disabled (by me by bios)
180 parallel port not found
181 . .seemingly irrelevant already working stuff...
183 bge0 <Broadcom BCM5775M Gigabit Ethernet> mem 0xf1bf0000-0xf1bffff irq
184 5 at device 0.0 on pci9
185 bge0: CHIP ID 0xa0020000; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E
186 miibus0: <MII bus> on bge0
187 details boot log via option 2 no ACPI:
189 ppc0 parallel port not found
190 cd9660 dev/cd0 invalid argument
191 then comes online , multiboots, multfilesystems verified Linux,DOS,Hammer same disk same time
192 intermittent dell switch compatibilization via switch powerconnect 2716/ethernet failed status no carrier, /bge0 no link, ifconfig 0.0.0.0 up, still no link, straight via cable its online instantly
196 look at bmake output:
201 bmake: don't know how to make print-summary-data. Stop WARNING (printdepends): the package in wip/dump had problem with /usr/pkg/bin/bmake print-summary-data
202 database information for this package will be dropped
203 bmake: don't know how to make print-summary-data. Stop. unknown modifier: 'x'
206 fredahead.c:38 implicit function declaration
208 >10000 > 5999 previously noted
210 bmake works, details:
211 Copyright (c) 2003-2009 The DragonFly Project.
212 Copyright (c) 1992-2003 The FreeBSD Project.
213 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
214 The Regents of the University of California. All rights reserved.
215 DragonFly v2.4.1-RELEASE #4: Wed Sep 30 20:07:33 PDT 2009
216 root@test28.backplane.com:/usr/obj/usr/src-misc/sys/DFLYLIVE
217 TSC clock: 2394065580 Hz, i8254 clock: 1193214 Hz
218 CPU: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (2394.02-MHz 686-class CPU)
219 Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
220 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
221 Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
222 Hyperthreading: 2 logical CPUs
223 real memory = 3756367872 (3668328K bytes)
224 avail memory = 3636994048 (3551752K bytes)
226 Pentium Pro MTRR support enabled
227 fildesc_drvinit() building stdin, stdout, stderr:
229 npx0: <math processor> on motherboard
230 npx0: INT 16 interface
231 Using XMM optimized bcopy/copyin/copyout
232 pcib0: <Host to PCI bridge> pcibus 0 on motherboard
233 pir0: <PCI Interrupt Routing Table: 13 Entries> on motherboard
234 pci0: <PCI bus> on pcib0
235 pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
236 pci1: <PCI bus> on pcib1
237 vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem 0xf2000000-0xf3ffffff,0xe0000000-0xefffffff,0xf5000000-0xf5ffffff irq 5 at device 0.0 on pci1
238 uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 11 at device 26.0 on pci0
239 usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
240 usb0: USB revision 1.0
241 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
242 uhub0: 2 ports with 2 removable, self powered
243 uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 10 at device 26.1 on pci0
244 usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
245 usb1: USB revision 1.0
246 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
247 uhub1: 2 ports with 2 removable, self powered
248 pci0: <serial bus, USB> (vendor 0x8086, dev 0x283a) at device 26.7 irq 9
249 pci0: <multimedia, HDA> (vendor 0x8086, dev 0x284b) at device 27.0 irq 10
250 pcib2: <PCIBIOS PCI-PCI bridge> at device 28.0 on pci0
251 pci11: <PCI bus> on pcib2
252 pcib3: <PCIBIOS PCI-PCI bridge> at device 28.1 on pci0
253 pci12: <PCI bus> on pcib3
254 pci12: <network> (vendor 0x14e4, dev 0x4328) at device 0.0 irq 3
255 pcib4: <PCIBIOS PCI-PCI bridge> at device 28.3 on pci0
256 pci13: <PCI bus> on pcib4
257 pcib5: <PCIBIOS PCI-PCI bridge> at device 28.5 on pci0
258 pci9: <PCI bus> on pcib5
259 bge0: <Broadcom BCM5755M Gigabit Ethernet> mem 0xf1bf0000-0xf1bfffff irq 3 at device 0.0 on pci9
260 bge0: CHIP ID 0xa0020000; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E
261 alignment check failed
262 miibus0: <MII bus> on bge0
263 brgphy0: <BCM5755 10/100/1000baseT PHY> on miibus0
264 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
265 bge0: MAC address: 00:1c:23:b3:9a:b7
266 uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 11 at device 29.0 on pci0
267 usb2: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
268 usb2: USB revision 1.0
269 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
270 uhub2: 2 ports with 2 removable, self powered
271 uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 10 at device 29.1 on pci0
272 usb3: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
273 usb3: USB revision 1.0
274 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
275 uhub3: 2 ports with 2 removable, self powered
276 uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 9 at device 29.2 on pci0
277 usb4: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
278 usb4: USB revision 1.0
279 uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
280 uhub4: 2 ports with 2 removable, self powered
281 pci0: <serial bus, USB> (vendor 0x8086, dev 0x2836) at device 29.7 irq 11
282 pcib6: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
283 pci3: <PCI bus> on pcib6
284 cbb0: <PCI-CardBus Bridge> irq 9 at device 1.0 on pci3
285 cardbus0: <CardBus bus> on cbb0
286 pccard0: <16-bit PCCard bus> on cbb0
287 fwohci0: vendor=1217, dev=f7
288 fwohci0: <1394 Open Host Controller Interface> mem 0xf1afe800-0xf1afefff,0xf1aff000-0xf1afffff irq 9 at device 1.4 on pci3
289 fwohci0: OHCI version 1.10 (ROM=0)
290 fwohci0: No. of Isochronous channel is 8.
291 fwohci0: EUI64 47:4f:c0:00:02:6a:ac:70
292 fwohci0: Phy 1394a available S400, 1 ports.
293 fwohci0: Link S400, max_rec 2048 bytes.
294 firewire0: <IEEE1394(FireWire) bus> on fwohci0
295 fwe0: <Ethernet over FireWire> on firewire0
296 fwe0: MAC address: 46:4f:c0:6a:ac:70
297 sbp0: <SBP-2/SCSI over FireWire> on firewire0
298 fwohci0: Initiate bus reset
299 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
300 firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
301 firewire0: bus manager 0 (me)
302 isab0: <PCI-ISA bridge> at device 31.0 on pci0
303 isa0: <ISA bus> on isab0
304 atapci0: <Intel ATA controller> port 0x6fa0-0x6faf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 5 at device 31.1 on pci0
305 ata0: <ATA channel 0> on atapci0
306 uhub5: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 2> on uhub4
307 acd0: DVDR <Optiarc DVD+/-RW AD-5560A/DD11> at ata0-master UDMA33
308 ata1: <ATA channel 1> on atapci0
309 atapci1: <Intel ICH8M SATA300 controller> port 0xeff0-0xefff,0x6ee0-0x6eef,0x6ec8-0x6ecb,0x6ec0-0x6ec7,0x6eb8-0x6ebb,0x6eb0-0x6eb7 irq 10 at device 31.2 on pci0
310 ata2: <ATA channel 0> on atapci1
311 uhub5: 4 ports with 3 removable, self powered
312 ad4: 152627MB <Seagate ST9160823AS 3.ADC> at ata2-master SATA300
313 ata3: <ATA channel 1> on atapci1
314 pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x283e) at device 31.3 irq 3
315 orm0: <Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcffff on isa0
316 fdc0: ready for input in output
317 fdc0: cmd 3 failed at out byte 1 of 3
318 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
319 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
321 psm0: <PS/2 Mouse> irq 12 on atkbdc0
322 psm0: model GlidePoint, device ID 0
323 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
324 sc0: <System console> at flags 0x100 on isa0
325 sc0: VGA <16 virtual consoles, flags=0x300>
326 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
328 sio1: can't drain, serial port might not exist, disabling
329 ppc0: parallel port not found.
330 intr 9 at 40001/40000 hz, livelocked limit engaged!
331 sched_ithd: stray interrupt 7 on cpu 0
332 sched_ithd: stray interrupt 7 on cpu 0
333 sched_ithd: stray interrupt 7 on cpu 0
334 sched_ithd: stray interrupt 7 on cpu 0
335 sched_ithd: stray interrupt 7 on cpu 0
336 sched_ithd: stray interrupt 7 on cpu 0
337 sched_ithd: stray interrupt 7 on cpu 0
338 sched_ithd: stray interrupt 7 on cpu 0
339 sched_ithd: 10 stray interrupts 7 on cpu 0 - there will be no further reports
340 ugen0: <O2 O2Micro CCID SC Reader, class 0/0, rev 1.10/1.10, addr 3> on uhub5
343 CAM: Configuring 5 busses
344 CAM: finished configuring all busses (0 left)
345 cd0 at ata0 bus 0 target 0 lun 0
346 cd0: <Optiarc DVD+-RW AD-5560A DD11> Removable CD-ROM SCSI-0 device
347 cd0: 33.000MB/s transfers
348 cd0: Attempt to query device size failed: NOT READY, Medium not present
349 intr 9 at 0/20000 hz, livelock removed
350 Mounting root from hammer:serno/5NK0J13Z.s1d
351 tryroot serno/5NK0J13Z.s1d