3 Copyright (c) 2003-2009 The DragonFly Project.
4 Copyright (c) 1992-2003 The FreeBSD Project.
5 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
6 The Regents of the University of California. All rights reserved.
7 DragonFly 2.2.0-RELEASE #0: Sun Feb 15 17:55:25 PST 2009
8 root@pkgbox.dragonflybsd.org:/build/usr.obj/usr/src/sys/DFLYLIVE
9 TSC clock: 2394005832 Hz, i8254 clock: 1193185 Hz
10 CPU: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (2394.02-MHz 686-class CPU)
11 Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
12 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
13 Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
14 Hyperthreading: 2 logical CPUs
15 real memory = 3756367872 (3668328K bytes)
16 avail memory = 3637329920 (3552080K bytes)
17 Preloaded elf kernel "/boot/kernel" at 0xc0809000.
18 Preloaded elf module "/boot/modules/acpi.ko" at 0xc08092ec.
19 Pentium Pro MTRR support enabled
21 pcibios: BIOS version 2.10
22 Using $PIR table, 13 entries at 0xc00fa570
23 ACPI: RSDP @ 0x0xfbb10/0x0024 (v 2 DELL )
24 ACPI: XSDT @ 0x0xdfe5d200/0x0064 (v 1 DELL M08 0x27D80C0B ASL 0x00000061)
25 ACPI: FACP @ 0x0xdfe5d09c/0x00F4 (v 4 DELL M08 0x27D80C0B ASL 0x00000061)
26 ACPI: DSDT @ 0x0xdfe5d800/0x63B2 (v 2 INT430 SYSFexxx 0x00001001 INTL 0x20050624)
27 ACPI: FACS @ 0x0xdfe6c000/0x0040
28 ACPI: HPET @ 0x0xdfe5d300/0x0038 (v 1 DELL M08 0x00000001 ASL 0x00000061)
29 ACPI: APIC @ 0x0xdfe5d400/0x0068 (v 1 DELL M08 0x27D80C0B ASL 0x00000047)
30 ACPI: ASF! @ 0x0xdfe5d000/0x007E (v 32 DELL M08 0x27D80C0B ASL 0x00000061)
31 ACPI: MCFG @ 0x0xdfe5d3c0/0x003E (v 16 DELL M08 0x27D80C0B ASL 0x00000061)
32 ACPI: TCPA @ 0x0xdfe5d700/0x0032 (v 1 0x00000000 ASL 0x00000000)
33 ACPI: SLIC @ 0x0xdfe5d49c/0x0176 (v 1 DELL M08 0x27D80C0B ASL 0x00000061)
34 ACPI: SSDT @ 0x0xdfe5b97e/0x04CC (v 1 PmRef CpuPm 0x00003000 INTL 0x20050624)
35 npx0: <math processor> on motherboard
36 npx0: INT 16 interface
37 Using XMM optimized bcopy/copyin/copyout
38 acpi0: <DELL M08 > on motherboard
39 ACPI: SSDT @ 0x0xdfe6c080/0x0043 (v 1 LMPWR DELLLOM 0x00001001 INTL 0x20050624)
40 Warning: ACPI is disabling APM's device. You can't run both
41 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
42 cpu0: <ACPI CPU> on acpi0
43 ACPI: SSDT @ 0x0xdfe5be4a/0x05E5 (v 1 PmRef Cpu0Cst 0x00003001 INTL 0x20050624)
44 ACPI: SSDT @ 0x0xdfe5c4b4/0x02C8 (v 1 PmRef Cpu0Ist 0x00003000 INTL 0x20050624)
45 acpi_tz0: <Thermal Zone> on acpi0
46 acpi_lid0: <Control Method Lid Switch> on acpi0
47 acpi_button0: <Power Button> on acpi0
48 acpi_button1: <Sleep Button> on acpi0
49 acpi_acad0: <AC Adapter> on acpi0
50 battery0: <ACPI Control Method Battery> on acpi0
51 battery1: <ACPI Control Method Battery> on acpi0
52 atkbdc0: <Keyboard controller (i8042)> port 0x66,0x62,0x64,0x60 irq 1 on acpi0
53 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
55 psm0: <PS/2 Mouse> irq 12 on atkbdc0
56 psm0: model GlidePoint, device ID 0
57 sio0 port 0x3f8-0x3ff irq 4 on acpi0
59 legacypci0 on motherboard
60 pcib0: <Host to PCI bridge> on legacypci0
61 pci0: <PCI bus> on pcib0
62 pcib1: <PCI to PCI bridge (vendor=8086 device=2a01)> at device 1.0 on pci0
63 pci1: <PCI bus> on pcib1
64 pci1: <NVidia model 0429 graphics accelerator> at 0.0 irq 5
65 uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 11 at device 26.0 on pci0
66 usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
67 usb0: USB revision 1.0
68 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
69 uhub0: 2 ports with 2 removable, self powered
70 uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 10 at device 26.1 on pci0
71 usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
72 usb1: USB revision 1.0
73 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
74 uhub1: 2 ports with 2 removable, self powered
75 pci0: <USB controller> at 26.7 irq 9
76 pci0: <unknown card> (vendor=0x8086, dev=0x284b) at 27.0 irq 10
77 pcib2: <PCI to PCI bridge (vendor=8086 device=283f)> at device 28.0 on pci0
78 pcib2: Disable PCI Express hot-plug interrupts(0x0008)
79 pci11: <PCI bus> on pcib2
80 pcib3: <PCI to PCI bridge (vendor=8086 device=2841)> at device 28.1 on pci0
81 pcib3: Disable PCI Express hot-plug interrupts(0x0008)
82 pci12: <PCI bus> on pcib3
83 pci12: <unknown card> (vendor=0x14e4, dev=0x4328) at 0.0 irq 3
84 pcib4: <PCI to PCI bridge (vendor=8086 device=2845)> at device 28.3 on pci0
85 pcib4: Disable PCI Express hot-plug interrupts(0x0008)
86 pci13: <PCI bus> on pcib4
87 pcib5: <PCI to PCI bridge (vendor=8086 device=2849)> at device 28.5 on pci0
88 pcib5: Disable PCI Express hot-plug interrupts(0x0008)
89 pci9: <PCI bus> on pcib5
90 bge0: <Broadcom BCM5755M Gigabit Ethernet> mem 0xf1bf0000-0xf1bfffff irq 3 at device 0.0 on pci9
91 bge0: CHIP ID 0xa0020000; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E
92 miibus0: <MII bus> on bge0
93 brgphy0: <BCM5755 10/100/1000baseT PHY> on miibus0
94 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
95 bge0: MAC address: 00:1d:09:ac:e2:3e
96 uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 11 at device 29.0 on pci0
97 usb2: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
98 usb2: USB revision 1.0
99 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
100 uhub2: 2 ports with 2 removable, self powered
101 uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 10 at device 29.1 on pci0
102 usb3: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
103 usb3: USB revision 1.0
104 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
105 uhub3: 2 ports with 2 removable, self powered
106 uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 9 at device 29.2 on pci0
107 usb4: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
108 usb4: USB revision 1.0
109 uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
110 uhub4: 2 ports with 2 removable, self powered
111 pci0: <USB controller> at 29.7 irq 11
112 pcib6: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
113 pci3: <PCI bus> on pcib6
114 cbb0: <PCI-CardBus Bridge> at device 1.0 on pci3
115 cardbus0: <CardBus bus> on cbb0
116 pccard0: <16-bit PCCard bus> on cbb0
117 pcib6: routed slot 1 INTA to irq 255
118 cbb: Unable to map IRQ...
119 device_probe_and_attach: cbb0 attach returned 12
120 fwohci0: vendor=1217, dev=f7
121 fwohci0: <1394 Open Host Controller Interface> mem 0xf1afe800-0xf1afefff,0xf1aff000-0xf1afffff irq 9 at device 1.4 on pci3
122 fwohci0: OHCI version 1.10 (ROM=0)
123 fwohci0: No. of Isochronous channel is 8.
124 fwohci0: EUI64 47:4f:c0:00:02:6a:ac:70
125 fwohci0: Phy 1394a available S400, 1 ports.
126 fwohci0: Link S400, max_rec 2048 bytes.
127 firewire0: <IEEE1394(FireWire) bus> on fwohci0
128 fwe0: <Ethernet over FireWire> on firewire0
129 fwe0: MAC address: 46:4f:c0:6a:ac:70
130 sbp0: <SBP-2/SCSI over FireWire> on firewire0
131 fwohci0: Initiate bus reset
132 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
133 firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
134 firewire0: bus manager 0 (me)
135 isab0: <PCI to ISA bridge (vendor=8086 device=2815)> at device 31.0 on pci0
136 isa0: <ISA bus> on isab0
137 atapci0: <Intel ATA controller> port 0x6fa0-0x6faf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 5 at device 31.1 on pci0
138 ata0: <ATA channel 0> on atapci0
139 uhub5: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 2> on uhub4
140 uhub5: 4 ports with 3 removable, self powered
141 acd0: DVDR <Optiarc DVD+/-RW AD-5560A/DD11> at ata0-master UDMA33
142 ata1: <ATA channel 1> on atapci0
143 atapci1: <Intel ICH8M SATA300 controller> port 0xeff0-0xefff,0x6ee0-0x6eef,0x6ec8-0x6ecb,0x6ec0-0x6ec7,0x6eb8-0x6ebb,0x6eb0-0x6eb7 irq 10 at device 31.2 on pci0
144 ata2: <ATA channel 0> on atapci1
145 ata3: <ATA channel 1> on atapci1
146 pci0: <unknown card> (vendor=0x8086, dev=0x283e) at 31.3 irq 3
147 eisa0: <EISA bus> on motherboard
148 mainboard0: <Y__ffff (System Board)> on eisa0 slot 0
150 fdc0: ready for input in output
151 fdc0: cmd 3 failed at out byte 1 of 3
152 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
153 sc0: <System console> at flags 0x100 on isa0
154 sc0: VGA <16 virtual consoles, flags=0x300>
155 sio2: can't drain, serial port might not exist, disabling
156 ppc0: parallel port not found.
157 ugen0: <vendor 0x413c product 0x8140, class 224/1, rev 2.00/43.15, addr 2> on uhub0
158 ugen1: <Novatel Wireless Novatel Wireless HSDPA Modem, class 0/0, rev 1.10/0.00, addr 2> on uhub1
159 ugen2: <O2 O2Micro CCID SC Reader, class 0/0, rev 1.10/1.10, addr 3> on uhub5
160 Mounting root from cd9660:cd0c
161 cd0 at ata0 bus 0 target 0 lun 0
162 cd0: <Optiarc DVD+-RW AD-5560A DD11> Removable CD-ROM SCSI-0 device
163 cd0: 33.000MB/s transfers
164 cd0: cd present [619632 x 2048 byte records]
165 (cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 17 22 0 0 1 0
166 (cd0:ata0:0:0:0): CAM Status: SCSI Status Error
167 (cd0:ata0:0:0:0): SCSI Status: Check Condition
168 (cd0:ata0:0:0:0): MEDIUM ERROR asc:2,0
169 (cd0:ata0:0:0:0): No seek complete
170 (cd0:ata0:0:0:0): Retrying Command (per Sense Data)
171 (cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 8 95 74 0 0 1 0
172 (cd0:ata0:0:0:0): CAM Status: SCSI Status Error
173 (cd0:ata0:0:0:0): SCSI Status: Check Condition
174 (cd0:ata0:0:0:0): MEDIUM ERROR asc:2,0
175 (cd0:ata0:0:0:0): No seek complete
176 (cd0:ata0:0:0:0): Retrying Command (per Sense Data)
177 (cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 3 2d 0 0 1 0
178 (cd0:ata0:0:0:0): CAM Status: SCSI Status Error
179 (cd0:ata0:0:0:0): SCSI Status: Check Condition
180 (cd0:ata0:0:0:0): MEDIUM ERROR asc:2,0
181 (cd0:ata0:0:0:0): No seek complete
182 (cd0:ata0:0:0:0): Retrying Command (per Sense Data)
183 (cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 3 27 0 0 1 0
184 (cd0:ata0:0:0:0): CAM Status: SCSI Status Error
185 (cd0:ata0:0:0:0): SCSI Status: Check Condition
186 (cd0:ata0:0:0:0): MEDIUM ERROR asc:2,0
187 (cd0:ata0:0:0:0): No seek complete
188 (cd0:ata0:0:0:0): Retrying Command (per Sense Data)
193 dev 70,root;72,var;74,tmp;76,etc;78;dev,80;usr,82;k
195 hostb0@pci0:0:0:0: class=0x060000 card=0x01fe1028 chip=0x2a008086 rev=0x0c hdr=0x00
196 vendor = 'Intel Corporation'
197 device = 'Mobile PM965/GM965/GL960 Express Processor to DRAM Controller'
200 pcib1@pci0:0:1:0: class=0x060400 card=0x01fe1028 chip=0x2a018086 rev=0x0c hdr=0x01
201 vendor = 'Intel Corporation'
202 device = 'Mobile PM965/GM965/GL960 Express PCIe Root Port'
205 uhci0@pci0:0:26:0: class=0x0c0300 card=0x01fe1028 chip=0x28348086 rev=0x02 hdr=0x00
206 vendor = 'Intel Corporation'
207 device = '82801H (ICH8 Family) USB UHCI'
210 uhci1@pci0:0:26:1: class=0x0c0300 card=0x01fe1028 chip=0x28358086 rev=0x02 hdr=0x00
211 vendor = 'Intel Corporation'
212 device = '82801H (ICH8 Family) USB UHCI'
215 none0@pci0:0:26:7: class=0x0c0320 card=0x01fe1028 chip=0x283a8086 rev=0x02 hdr=0x00
216 vendor = 'Intel Corporation'
217 device = '81EC1043 (?) ICH8 Enhanced USB2 Enhanced Host Controller'
220 none1@pci0:0:27:0: class=0x040300 card=0x01fe1028 chip=0x284b8086 rev=0x02 hdr=0x00
221 vendor = 'Intel Corporation'
222 device = '82801H Intel audio controller embedded with the 82801H chipset ( ICH8 chipset )'
225 pcib2@pci0:0:28:0: class=0x060400 card=0x01fe1028 chip=0x283f8086 rev=0x02 hdr=0x01
226 vendor = 'Intel Corporation'
227 device = '82801H (ICH8 Family) PCIe Port 1'
230 pcib3@pci0:0:28:1: class=0x060400 card=0x01fe1028 chip=0x28418086 rev=0x02 hdr=0x01
231 vendor = 'Intel Corporation'
232 device = '82801H (ICH8 Family) PCIe Port 2'
235 pcib4@pci0:0:28:3: class=0x060400 card=0x01fe1028 chip=0x28458086 rev=0x02 hdr=0x01
236 vendor = 'Intel Corporation'
237 device = '82801H (ICH8 Family) PCIe Port 4'
240 pcib5@pci0:0:28:5: class=0x060400 card=0x01fe1028 chip=0x28498086 rev=0x02 hdr=0x01
241 vendor = 'Intel Corporation'
242 device = '82801H (ICH8 Family) PCIe Port 6'
245 uhci2@pci0:0:29:0: class=0x0c0300 card=0x01fe1028 chip=0x28308086 rev=0x02 hdr=0x00
246 vendor = 'Intel Corporation'
247 device = '82801H (ICH8 Family) USB UHCI'
250 uhci3@pci0:0:29:1: class=0x0c0300 card=0x01fe1028 chip=0x28318086 rev=0x02 hdr=0x00
251 vendor = 'Intel Corporation'
252 device = '82801H (ICH8 Family) USB UHCI'
255 uhci4@pci0:0:29:2: class=0x0c0300 card=0x01fe1028 chip=0x28328086 rev=0x02 hdr=0x00
256 vendor = 'Intel Corporation'
257 device = '82801H (ICH8 Family) USB UHCI'
260 none2@pci0:0:29:7: class=0x0c0320 card=0x01fe1028 chip=0x28368086 rev=0x02 hdr=0x00
261 vendor = 'Intel Corporation'
262 device = '82801H (ICH8 Family) USB2 EHCI'
265 pcib6@pci0:0:30:0: class=0x060401 card=0x01fe1028 chip=0x24488086 rev=0xf2 hdr=0x01
266 vendor = 'Intel Corporation'
267 device = '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to PCI Bridge'
270 isab0@pci0:0:31:0: class=0x060100 card=0x01fe1028 chip=0x28158086 rev=0x02 hdr=0x00
271 vendor = 'Intel Corporation'
272 device = '82801HEM (ICH8M-E) LPC Interface Controller'
275 atapci0@pci0:0:31:1: class=0x01018a card=0x01fe1028 chip=0x28508086 rev=0x02 hdr=0x00
276 vendor = 'Intel Corporation'
277 device = '82801H (ICH8 Family) Ultra ATA Storage Controllers'
280 atapci1@pci0:0:31:2: class=0x01018f card=0x01fe1028 chip=0x28288086 rev=0x02 hdr=0x00
281 vendor = 'Intel Corporation'
282 device = '82801 (ICH8M) 3 port SATA Controller'
285 none3@pci0:0:31:3: class=0x0c0500 card=0x01fe1028 chip=0x283e8086 rev=0x02 hdr=0x00
286 vendor = 'Intel Corporation'
287 device = '82801H (ICH8 Family) SMBus Controller'
290 vgapci0@pci0:1:0:0: class=0x030000 card=0x01fe1028 chip=0x042910de rev=0xa1 hdr=0x00
291 vendor = 'Nvidia Corp'
292 device = 'Unknown nVidia Quadro NVS 135M or Quadro NVS 140M'
295 none4@pci0:12:0:0: class=0x028000 card=0x000a1028 chip=0x432814e4 rev=0x03 hdr=0x00
296 vendor = 'Broadcom Corporation'
297 device = 'BCM4321KFBG Broadcom 432AGN 802.11a/b/g/draft-n Wi-Fi Solution'
299 bge0@pci0:9:0:0: class=0x020000 card=0x01fe1028 chip=0x167314e4 rev=0x02 hdr=0x00
300 vendor = 'Broadcom Corporation'
301 device = 'NetXtreme BCM5755M Gigabit Ethernet PCIe'
304 cbb0@pci0:3:1:0: class=0x060700 card=0x01fe1028 chip=0x71351217 rev=0x21 hdr=0x02
305 vendor = 'O2 Micro Inc'
306 device = 'OZ711EZ1 MemoryCardBus Controller'
308 subclass = PCI-CardBus
309 fwohci0@pci0:3:1:4: class=0x0c0010 card=0x01fe1028 chip=0x00f71217 rev=0x02 hdr=0x00
310 vendor = 'O2 Micro Inc'
311 device = '0x00f71217 1394 Open Host Controller Interface'
316 default 2.4.1 (1) bootoutput live and/or installed:
318 sio2: can't drain, serial port might not exist, disabling
319 ppc0:parallel port not found (blocked, catatonic, won't respond....)
320 boot option 2 (ACPI disabled) gets along rather perfect til:
323 bge0: no carrier.......
325 ...via switch.2716 all is go, network still manually must patchthrough.
327 main thing compatibilize dell powerconnect switch 2716, straght ethernet cabling ok, boot to linux then via switch works, tried dlfy command ifconfig 0.0.0.0 bge0 up still no carrier via switch though as single client no problem, mostly very impressive results, tripleboot ubuntu karmic, mandriva, dfly ok, mostly learning this and peripherals compatibilizations:
331 device = 'Mobile PM965&GM965&GL960 to DRAM'
335 device = 'Mobile PM965&GM965&GL960 to DRAM'
339 device = '82801H ICH8 USB'
345 device = 'Unknown nVidia Quadro NVS 135M or Quadro NVS 140M'
348 vendor= 'Broadcom Corporation'
349 device = 'BCM4321KFBG Broadcom 432AGM 802.11a Wi/Fi'
351 vendor= 'Broadcom Corporation'
352 device = 'NetXtreme BCM5755M Gigabit Ethernet PCIe'
355 cbb@pci3:1:0: class=0x060700 card=0x01fe1028 chip=0x71351217 rev=0x21 hdr=0x02
356 . ..cardbus irrelevance...
358 serial ports disabled (by me by bios)
359 parallel port not found
360 . .seemingly irrelevant already working stuff...
362 bge0 <Broadcom BCM5775M Gigabit Ethernet> mem 0xf1bf0000-0xf1bffff irq
363 5 at device 0.0 on pci9
364 bge0: CHIP ID 0xa0020000; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E
365 miibus0: <MII bus> on bge0
366 details boot log via option 2 no ACPI:
368 ppc0 parallel port not found
369 cd9660 dev/cd0 invalid argument
370 then comes online , multiboots, multfilesystems verified Linux,DOS,Hammer same disk same time
371 intermittent dell switch compatibilization via switch powerconnect 2716/ethernet failed status no carrier, /bge0 no link, ifconfig 0.0.0.0 up, still no link, straight via cable its online instantly
375 look at bmake output:
380 bmake: don't know how to make print-summary-data. Stop WARNING (printdepends): the package in wip/dump had problem with /usr/pkg/bin/bmake print-summary-data
381 database information for this package will be dropped
382 bmake: don't know how to make print-summary-data. Stop. unknown modifier: 'x'
385 fredahead.c:38 implicit function declaration
387 >10000 > 5999 previously noted
389 bmake works, details:
390 Copyright (c) 2003-2009 The DragonFly Project.
391 Copyright (c) 1992-2003 The FreeBSD Project.
392 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
393 The Regents of the University of California. All rights reserved.
394 DragonFly v2.4.1-RELEASE #4: Wed Sep 30 20:07:33 PDT 2009
395 root@test28.backplane.com:/usr/obj/usr/src-misc/sys/DFLYLIVE
396 TSC clock: 2394065580 Hz, i8254 clock: 1193214 Hz
397 CPU: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (2394.02-MHz 686-class CPU)
398 Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
399 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
400 Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
401 Hyperthreading: 2 logical CPUs
402 real memory = 3756367872 (3668328K bytes)
403 avail memory = 3636994048 (3551752K bytes)
405 Pentium Pro MTRR support enabled
406 fildesc_drvinit() building stdin, stdout, stderr:
408 npx0: <math processor> on motherboard
409 npx0: INT 16 interface
410 Using XMM optimized bcopy/copyin/copyout
411 pcib0: <Host to PCI bridge> pcibus 0 on motherboard
412 pir0: <PCI Interrupt Routing Table: 13 Entries> on motherboard
413 pci0: <PCI bus> on pcib0
414 pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
415 pci1: <PCI bus> on pcib1
416 vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem 0xf2000000-0xf3ffffff,0xe0000000-0xefffffff,0xf5000000-0xf5ffffff irq 5 at device 0.0 on pci1
417 uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 11 at device 26.0 on pci0
418 usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
419 usb0: USB revision 1.0
420 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
421 uhub0: 2 ports with 2 removable, self powered
422 uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 10 at device 26.1 on pci0
423 usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
424 usb1: USB revision 1.0
425 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
426 uhub1: 2 ports with 2 removable, self powered
427 pci0: <serial bus, USB> (vendor 0x8086, dev 0x283a) at device 26.7 irq 9
428 pci0: <multimedia, HDA> (vendor 0x8086, dev 0x284b) at device 27.0 irq 10
429 pcib2: <PCIBIOS PCI-PCI bridge> at device 28.0 on pci0
430 pci11: <PCI bus> on pcib2
431 pcib3: <PCIBIOS PCI-PCI bridge> at device 28.1 on pci0
432 pci12: <PCI bus> on pcib3
433 pci12: <network> (vendor 0x14e4, dev 0x4328) at device 0.0 irq 3
434 pcib4: <PCIBIOS PCI-PCI bridge> at device 28.3 on pci0
435 pci13: <PCI bus> on pcib4
436 pcib5: <PCIBIOS PCI-PCI bridge> at device 28.5 on pci0
437 pci9: <PCI bus> on pcib5
438 bge0: <Broadcom BCM5755M Gigabit Ethernet> mem 0xf1bf0000-0xf1bfffff irq 3 at device 0.0 on pci9
439 bge0: CHIP ID 0xa0020000; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E
440 alignment check failed
441 miibus0: <MII bus> on bge0
442 brgphy0: <BCM5755 10/100/1000baseT PHY> on miibus0
443 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
444 bge0: MAC address: 00:1c:23:b3:9a:b7
445 uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 11 at device 29.0 on pci0
446 usb2: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
447 usb2: USB revision 1.0
448 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
449 uhub2: 2 ports with 2 removable, self powered
450 uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 10 at device 29.1 on pci0
451 usb3: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
452 usb3: USB revision 1.0
453 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
454 uhub3: 2 ports with 2 removable, self powered
455 uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 9 at device 29.2 on pci0
456 usb4: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
457 usb4: USB revision 1.0
458 uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
459 uhub4: 2 ports with 2 removable, self powered
460 pci0: <serial bus, USB> (vendor 0x8086, dev 0x2836) at device 29.7 irq 11
461 pcib6: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
462 pci3: <PCI bus> on pcib6
463 cbb0: <PCI-CardBus Bridge> irq 9 at device 1.0 on pci3
464 cardbus0: <CardBus bus> on cbb0
465 pccard0: <16-bit PCCard bus> on cbb0
466 fwohci0: vendor=1217, dev=f7
467 fwohci0: <1394 Open Host Controller Interface> mem 0xf1afe800-0xf1afefff,0xf1aff000-0xf1afffff irq 9 at device 1.4 on pci3
468 fwohci0: OHCI version 1.10 (ROM=0)
469 fwohci0: No. of Isochronous channel is 8.
470 fwohci0: EUI64 47:4f:c0:00:02:6a:ac:70
471 fwohci0: Phy 1394a available S400, 1 ports.
472 fwohci0: Link S400, max_rec 2048 bytes.
473 firewire0: <IEEE1394(FireWire) bus> on fwohci0
474 fwe0: <Ethernet over FireWire> on firewire0
475 fwe0: MAC address: 46:4f:c0:6a:ac:70
476 sbp0: <SBP-2/SCSI over FireWire> on firewire0
477 fwohci0: Initiate bus reset
478 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
479 firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
480 firewire0: bus manager 0 (me)
481 isab0: <PCI-ISA bridge> at device 31.0 on pci0
482 isa0: <ISA bus> on isab0
483 atapci0: <Intel ATA controller> port 0x6fa0-0x6faf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 5 at device 31.1 on pci0
484 ata0: <ATA channel 0> on atapci0
485 uhub5: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 2> on uhub4
486 acd0: DVDR <Optiarc DVD+/-RW AD-5560A/DD11> at ata0-master UDMA33
487 ata1: <ATA channel 1> on atapci0
488 atapci1: <Intel ICH8M SATA300 controller> port 0xeff0-0xefff,0x6ee0-0x6eef,0x6ec8-0x6ecb,0x6ec0-0x6ec7,0x6eb8-0x6ebb,0x6eb0-0x6eb7 irq 10 at device 31.2 on pci0
489 ata2: <ATA channel 0> on atapci1
490 uhub5: 4 ports with 3 removable, self powered
491 ad4: 152627MB <Seagate ST9160823AS 3.ADC> at ata2-master SATA300
492 ata3: <ATA channel 1> on atapci1
493 pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x283e) at device 31.3 irq 3
494 orm0: <Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcffff on isa0
495 fdc0: ready for input in output
496 fdc0: cmd 3 failed at out byte 1 of 3
497 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
498 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
500 psm0: <PS/2 Mouse> irq 12 on atkbdc0
501 psm0: model GlidePoint, device ID 0
502 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
503 sc0: <System console> at flags 0x100 on isa0
504 sc0: VGA <16 virtual consoles, flags=0x300>
505 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
507 sio1: can't drain, serial port might not exist, disabling
508 ppc0: parallel port not found.
509 intr 9 at 40001/40000 hz, livelocked limit engaged!
510 sched_ithd: stray interrupt 7 on cpu 0
511 sched_ithd: stray interrupt 7 on cpu 0
512 sched_ithd: stray interrupt 7 on cpu 0
513 sched_ithd: stray interrupt 7 on cpu 0
514 sched_ithd: stray interrupt 7 on cpu 0
515 sched_ithd: stray interrupt 7 on cpu 0
516 sched_ithd: stray interrupt 7 on cpu 0
517 sched_ithd: stray interrupt 7 on cpu 0
518 sched_ithd: 10 stray interrupts 7 on cpu 0 - there will be no further reports
519 ugen0: <O2 O2Micro CCID SC Reader, class 0/0, rev 1.10/1.10, addr 3> on uhub5
522 CAM: Configuring 5 busses
523 CAM: finished configuring all busses (0 left)
524 cd0 at ata0 bus 0 target 0 lun 0
525 cd0: <Optiarc DVD+-RW AD-5560A DD11> Removable CD-ROM SCSI-0 device
526 cd0: 33.000MB/s transfers
527 cd0: Attempt to query device size failed: NOT READY, Medium not present
528 intr 9 at 0/20000 hz, livelock removed
529 Mounting root from hammer:serno/5NK0J13Z.s1d
530 tryroot serno/5NK0J13Z.s1d