dmesg:

    Copyright (c) 2003-2009 The DragonFly Project.
    Copyright (c) 1992-2003 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
    DragonFly 2.2.0-RELEASE #0: Sun Feb 15 17:55:25 PST 2009
    root@pkgbox.dragonflybsd.org:/build/usr.obj/usr/src/sys/DFLYLIVE
    TSC clock: 2394005832 Hz, i8254 clock: 1193185 Hz
    CPU: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz (2394.02-MHz 686-class CPU)
    Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
    Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
    Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
    Hyperthreading: 2 logical CPUs
    real memory  = 3756367872 (3668328K bytes)
    avail memory = 3637329920 (3552080K bytes)
    Preloaded elf kernel "/boot/kernel" at 0xc0809000.
    Preloaded elf module "/boot/modules/acpi.ko" at 0xc08092ec.
    Pentium Pro MTRR support enabled
    md0: Malloc disk
    pcibios: BIOS version 2.10
    Using $PIR table, 13 entries at 0xc00fa570
    ACPI: RSDP @ 0x0xfbb10/0x0024 (v  2 DELL  )
    ACPI: XSDT @ 0x0xdfe5d200/0x0064 (v  1 DELL    M08     0x27D80C0B ASL  0x00000061)
    ACPI: FACP @ 0x0xdfe5d09c/0x00F4 (v  4 DELL    M08     0x27D80C0B ASL  0x00000061)
    ACPI: DSDT @ 0x0xdfe5d800/0x63B2 (v  2 INT430 SYSFexxx 0x00001001 INTL 0x20050624)
    ACPI: FACS @ 0x0xdfe6c000/0x0040
    ACPI: HPET @ 0x0xdfe5d300/0x0038 (v  1 DELL    M08     0x00000001 ASL  0x00000061)
    ACPI: APIC @ 0x0xdfe5d400/0x0068 (v  1 DELL    M08     0x27D80C0B ASL  0x00000047)
    ACPI: ASF! @ 0x0xdfe5d000/0x007E (v 32 DELL    M08     0x27D80C0B ASL  0x00000061)
    ACPI: MCFG @ 0x0xdfe5d3c0/0x003E (v 16 DELL    M08     0x27D80C0B ASL  0x00000061)
    ACPI: TCPA @ 0x0xdfe5d700/0x0032 (v  1                 0x00000000 ASL  0x00000000)
    ACPI: SLIC @ 0x0xdfe5d49c/0x0176 (v  1 DELL    M08     0x27D80C0B ASL  0x00000061)
    ACPI: SSDT @ 0x0xdfe5b97e/0x04CC (v  1  PmRef    CpuPm 0x00003000 INTL 0x20050624)
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    Using XMM optimized bcopy/copyin/copyout
    acpi0: <DELL M08    > on motherboard
    ACPI: SSDT @ 0x0xdfe6c080/0x0043 (v  1  LMPWR  DELLLOM 0x00001001 INTL 0x20050624)
    Warning: ACPI is disabling APM's device.  You can't run both
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
    cpu0: <ACPI CPU> on acpi0
    ACPI: SSDT @ 0x0xdfe5be4a/0x05E5 (v  1  PmRef  Cpu0Cst 0x00003001 INTL 0x20050624)
    ACPI: SSDT @ 0x0xdfe5c4b4/0x02C8 (v  1  PmRef  Cpu0Ist 0x00003000 INTL 0x20050624)
    acpi_tz0: <Thermal Zone> on acpi0
    acpi_lid0: <Control Method Lid Switch> on acpi0
    acpi_button0: <Power Button> on acpi0
    acpi_button1: <Sleep Button> on acpi0
    acpi_acad0: <AC Adapter> on acpi0
    battery0: <ACPI Control Method Battery> on acpi0
    battery1: <ACPI Control Method Battery> on acpi0
    atkbdc0: <Keyboard controller (i8042)> port 0x66,0x62,0x64,0x60 irq 1 on acpi0
    atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
    kbd0 at atkbd0
    psm0: <PS/2 Mouse> irq 12 on atkbdc0
    psm0: model GlidePoint, device ID 0
    sio0 port 0x3f8-0x3ff irq 4 on acpi0
    sio0: type 16550A
    legacypci0 on motherboard
    pcib0: <Host to PCI bridge> on legacypci0
    pci0: <PCI bus> on pcib0
    pcib1: <PCI to PCI bridge (vendor=8086 device=2a01)> at device 1.0 on pci0
    pci1: <PCI bus> on pcib1
    pci1: <NVidia model 0429 graphics accelerator> at 0.0 irq 5
    uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 11 at device 26.0 on pci0
    usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
    usb0: USB revision 1.0
    uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
    uhub0: 2 ports with 2 removable, self powered
    uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 10 at device 26.1 on pci0
    usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
    usb1: USB revision 1.0
    uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
    uhub1: 2 ports with 2 removable, self powered
    pci0: <USB controller> at 26.7 irq 9
    pci0: <unknown card> (vendor=0x8086, dev=0x284b) at 27.0 irq 10
    pcib2: <PCI to PCI bridge (vendor=8086 device=283f)> at device 28.0 on pci0
    pcib2: Disable PCI Express hot-plug interrupts(0x0008)
    pci11: <PCI bus> on pcib2
    pcib3: <PCI to PCI bridge (vendor=8086 device=2841)> at device 28.1 on pci0
    pcib3: Disable PCI Express hot-plug interrupts(0x0008)
    pci12: <PCI bus> on pcib3
    pci12: <unknown card> (vendor=0x14e4, dev=0x4328) at 0.0 irq 3
    pcib4: <PCI to PCI bridge (vendor=8086 device=2845)> at device 28.3 on pci0
    pcib4: Disable PCI Express hot-plug interrupts(0x0008)
    pci13: <PCI bus> on pcib4
    pcib5: <PCI to PCI bridge (vendor=8086 device=2849)> at device 28.5 on pci0
    pcib5: Disable PCI Express hot-plug interrupts(0x0008)
    pci9: <PCI bus> on pcib5
    bge0: <Broadcom BCM5755M Gigabit Ethernet> mem 0xf1bf0000-0xf1bfffff irq 3 at device 0.0 on pci9
    bge0: CHIP ID 0xa0020000; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E
    miibus0: <MII bus> on bge0
    brgphy0: <BCM5755 10/100/1000baseT PHY> on miibus0
    brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
    bge0: MAC address: 00:1d:09:ac:e2:3e
    uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 11 at device 29.0 on pci0
    usb2: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
    usb2: USB revision 1.0
    uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
    uhub2: 2 ports with 2 removable, self powered
    uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 10 at device 29.1 on pci0
    usb3: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
    usb3: USB revision 1.0
    uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
    uhub3: 2 ports with 2 removable, self powered
    uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 9 at device 29.2 on pci0
    usb4: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
    usb4: USB revision 1.0
    uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
    uhub4: 2 ports with 2 removable, self powered
    pci0: <USB controller> at 29.7 irq 11
    pcib6: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
    pci3: <PCI bus> on pcib6
    cbb0: <PCI-CardBus Bridge> at device 1.0 on pci3
    cardbus0: <CardBus bus> on cbb0
    pccard0: <16-bit PCCard bus> on cbb0
    pcib6: routed slot 1 INTA to irq 255
    cbb: Unable to map IRQ...
    device_probe_and_attach: cbb0 attach returned 12
    fwohci0: vendor=1217, dev=f7
    fwohci0: <1394 Open Host Controller Interface> mem 0xf1afe800-0xf1afefff,0xf1aff000-0xf1afffff irq 9 at device 1.4 on pci3
    fwohci0: OHCI version 1.10 (ROM=0)
    fwohci0: No. of Isochronous channel is 8.
    fwohci0: EUI64 47:4f:c0:00:02:6a:ac:70
    fwohci0: Phy 1394a available S400, 1 ports.
    fwohci0: Link S400, max_rec 2048 bytes.
    firewire0: <IEEE1394(FireWire) bus> on fwohci0
    fwe0: <Ethernet over FireWire> on firewire0
    fwe0: MAC address: 46:4f:c0:6a:ac:70
    sbp0: <SBP-2/SCSI over FireWire> on firewire0
    fwohci0: Initiate bus reset
    fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
    firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
    firewire0: bus manager 0 (me)
    isab0: <PCI to ISA bridge (vendor=8086 device=2815)> at device 31.0 on pci0
    isa0: <ISA bus> on isab0
    atapci0: <Intel ATA controller> port 0x6fa0-0x6faf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 5 at device 31.1 on pci0
    ata0: <ATA channel 0> on atapci0
    uhub5: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 2> on uhub4
    uhub5: 4 ports with 3 removable, self powered
    acd0: DVDR <Optiarc DVD+/-RW AD-5560A/DD11> at ata0-master UDMA33
    ata1: <ATA channel 1> on atapci0
    atapci1: <Intel ICH8M SATA300 controller> port 0xeff0-0xefff,0x6ee0-0x6eef,0x6ec8-0x6ecb,0x6ec0-0x6ec7,0x6eb8-0x6ebb,0x6eb0-0x6eb7 irq 10 at device 31.2 on pci0
    ata2: <ATA channel 0> on atapci1
    ata3: <ATA channel 1> on atapci1
    pci0: <unknown card> (vendor=0x8086, dev=0x283e) at 31.3 irq 3
    eisa0: <EISA bus> on motherboard
    mainboard0: <Y__ffff (System Board)> on eisa0 slot 0
    pmtimer0 on isa0
    fdc0: ready for input in output
    fdc0: cmd 3 failed at out byte 1 of 3
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    sio2: can't drain, serial port might not exist, disabling
    ppc0: parallel port not found.
    ugen0: <vendor 0x413c product 0x8140, class 224/1, rev 2.00/43.15, addr 2> on uhub0
    ugen1: <Novatel Wireless Novatel Wireless HSDPA Modem, class 0/0, rev 1.10/0.00, addr 2> on uhub1
    ugen2: <O2 O2Micro CCID SC Reader, class 0/0, rev 1.10/1.10, addr 3> on uhub5
    Mounting root from cd9660:cd0c
    cd0 at ata0 bus 0 target 0 lun 0
    cd0: <Optiarc DVD+-RW AD-5560A DD11> Removable CD-ROM SCSI-0 device 
    cd0: 33.000MB/s transfers
    cd0: cd present [619632 x 2048 byte records]
    (cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 17 22 0 0 1 0 
    (cd0:ata0:0:0:0): CAM Status: SCSI Status Error
    (cd0:ata0:0:0:0): SCSI Status: Check Condition
    (cd0:ata0:0:0:0): MEDIUM ERROR asc:2,0
    (cd0:ata0:0:0:0): No seek complete
    (cd0:ata0:0:0:0): Retrying Command (per Sense Data)
    (cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 8 95 74 0 0 1 0 
    (cd0:ata0:0:0:0): CAM Status: SCSI Status Error
    (cd0:ata0:0:0:0): SCSI Status: Check Condition
    (cd0:ata0:0:0:0): MEDIUM ERROR asc:2,0
    (cd0:ata0:0:0:0): No seek complete
    (cd0:ata0:0:0:0): Retrying Command (per Sense Data)
    (cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 3 2d 0 0 1 0 
    (cd0:ata0:0:0:0): CAM Status: SCSI Status Error
    (cd0:ata0:0:0:0): SCSI Status: Check Condition
    (cd0:ata0:0:0:0): MEDIUM ERROR asc:2,0
    (cd0:ata0:0:0:0): No seek complete
    (cd0:ata0:0:0:0): Retrying Command (per Sense Data)
    (cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 3 27 0 0 1 0 
    (cd0:ata0:0:0:0): CAM Status: SCSI Status Error
    (cd0:ata0:0:0:0): SCSI Status: Check Condition
    (cd0:ata0:0:0:0): MEDIUM ERROR asc:2,0
    (cd0:ata0:0:0:0): No seek complete
    (cd0:ata0:0:0:0): Retrying Command (per Sense Data)


pciconf:

    dev 70,root;72,var;74,tmp;76,etc;78;dev,80;usr,82;k 

    hostb0@pci0:0:0:0:	class=0x060000 card=0x01fe1028 chip=0x2a008086 rev=0x0c hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile PM965/GM965/GL960 Express Processor to DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
    pcib1@pci0:0:1:0:	class=0x060400 card=0x01fe1028 chip=0x2a018086 rev=0x0c hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Mobile PM965/GM965/GL960 Express PCIe Root Port'
    class      = bridge
    subclass   = PCI-PCI
    uhci0@pci0:0:26:0:	class=0x0c0300 card=0x01fe1028 chip=0x28348086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI'
    class      = serial bus
    subclass   = USB
    uhci1@pci0:0:26:1:	class=0x0c0300 card=0x01fe1028 chip=0x28358086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI'
    class      = serial bus
    subclass   = USB
    none0@pci0:0:26:7:	class=0x0c0320 card=0x01fe1028 chip=0x283a8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '81EC1043 (?) ICH8 Enhanced USB2 Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
    none1@pci0:0:27:0:	class=0x040300 card=0x01fe1028 chip=0x284b8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H Intel audio controller embedded with the 82801H chipset ( ICH8 chipset )'
    class      = multimedia
    subclass   = HDA
    pcib2@pci0:0:28:0:	class=0x060400 card=0x01fe1028 chip=0x283f8086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 1'
    class      = bridge
    subclass   = PCI-PCI
    pcib3@pci0:0:28:1:	class=0x060400 card=0x01fe1028 chip=0x28418086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 2'
    class      = bridge
    subclass   = PCI-PCI
    pcib4@pci0:0:28:3:	class=0x060400 card=0x01fe1028 chip=0x28458086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 4'
    class      = bridge
    subclass   = PCI-PCI
    pcib5@pci0:0:28:5:	class=0x060400 card=0x01fe1028 chip=0x28498086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 6'
    class      = bridge
    subclass   = PCI-PCI
    uhci2@pci0:0:29:0:	class=0x0c0300 card=0x01fe1028 chip=0x28308086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI'
    class      = serial bus
    subclass   = USB
    uhci3@pci0:0:29:1:	class=0x0c0300 card=0x01fe1028 chip=0x28318086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI'
    class      = serial bus
    subclass   = USB
    uhci4@pci0:0:29:2:	class=0x0c0300 card=0x01fe1028 chip=0x28328086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI'
    class      = serial bus
    subclass   = USB
    none2@pci0:0:29:7:	class=0x0c0320 card=0x01fe1028 chip=0x28368086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB2 EHCI'
    class      = serial bus
    subclass   = USB
    pcib6@pci0:0:30:0:	class=0x060401 card=0x01fe1028 chip=0x24488086 rev=0xf2 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
    isab0@pci0:0:31:0:	class=0x060100 card=0x01fe1028 chip=0x28158086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801HEM (ICH8M-E) LPC Interface Controller'
    class      = bridge
    subclass   = PCI-ISA
    atapci0@pci0:0:31:1:	class=0x01018a card=0x01fe1028 chip=0x28508086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) Ultra ATA Storage Controllers'
    class      = mass storage
    subclass   = ATA
    atapci1@pci0:0:31:2:	class=0x01018f card=0x01fe1028 chip=0x28288086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801 (ICH8M) 3 port SATA Controller'
    class      = mass storage
    subclass   = ATA
    none3@pci0:0:31:3:	class=0x0c0500 card=0x01fe1028 chip=0x283e8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) SMBus Controller'
    class      = serial bus
    subclass   = SMBus
    vgapci0@pci0:1:0:0:	class=0x030000 card=0x01fe1028 chip=0x042910de rev=0xa1 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'Unknown nVidia Quadro NVS 135M or Quadro NVS 140M'
    class      = display
    subclass   = VGA
    none4@pci0:12:0:0:	class=0x028000 card=0x000a1028 chip=0x432814e4 rev=0x03 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'BCM4321KFBG Broadcom 432AGN 802.11a/b/g/draft-n Wi-Fi Solution'
    class      = network
    bge0@pci0:9:0:0:	class=0x020000 card=0x01fe1028 chip=0x167314e4 rev=0x02 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'NetXtreme BCM5755M Gigabit Ethernet PCIe'
    class      = network
    subclass   = ethernet
    cbb0@pci0:3:1:0:	class=0x060700 card=0x01fe1028 chip=0x71351217 rev=0x21 hdr=0x02
    vendor     = 'O2 Micro Inc'
    device     = 'OZ711EZ1 MemoryCardBus Controller'
    class      = bridge
    subclass   = PCI-CardBus
    fwohci0@pci0:3:1:4:	class=0x0c0010 card=0x01fe1028 chip=0x00f71217 rev=0x02 hdr=0x00
    vendor     = 'O2 Micro Inc'
    device     = '0x00f71217 1394 Open Host Controller Interface'
    class      = serial bus
    subclass   = FireWire


default 2.4.1 (1) bootoutput live and/or installed:

    sio2: can't drain, serial port might not exist, disabling
    ppc0:parallel port not found (blocked, catatonic, won't respond....)
boot option 2 (ACPI disabled) gets along rather perfect til:

    bge0: no link.......
    bge0: no carrier.......

...via switch.2716 all is go, network still manually must patchthrough.

main thing compatibilize dell powerconnect switch 2716, straght ethernet cabling ok, boot to linux then via switch works, tried dlfy command ifconfig 0.0.0.0 bge0 up still no carrier via switch though as single client no problem, mostly very impressive results, tripleboot ubuntu karmic, mandriva, dfly ok, mostly learning this and peripherals compatibilizations:

    pciconf -lv
    vendor= 'Intel'
    device = 'Mobile PM965&GM965&GL960 to DRAM'
    class = bridge
    subclass = PCI-PCI
    vendor= 'Intel'
    device = 'Mobile PM965&GM965&GL960 to DRAM'
    class = bridge
    subclass = HOST-PCI
    vendor= 'Intel'
    device = '82801H ICH8 USB'
    class = serial bus
    subclass = USB
...

    vendor= 'Nvidia'
    device = 'Unknown nVidia Quadro NVS 135M or Quadro NVS 140M'
    class = display
    subclass = VGA
    vendor= 'Broadcom Corporation'
    device = 'BCM4321KFBG Broadcom 432AGM 802.11a Wi/Fi'
    class = network
    vendor= 'Broadcom Corporation'
    device = 'NetXtreme BCM5755M Gigabit Ethernet PCIe'
    class = network
    subclass = ethernet
    cbb@pci3:1:0:  class=0x060700 card=0x01fe1028 chip=0x71351217 rev=0x21 hdr=0x02
. ..cardbus irrelevance...
###dmesg
serial ports disabled (by me by bios)
parallel port not found
. .seemingly irrelevant already working stuff...

    bge0 <Broadcom BCM5775M Gigabit Ethernet> mem 0xf1bf0000-0xf1bffff irq
    5 at device 0.0 on pci9
    bge0: CHIP ID 0xa0020000; ASIC REV 0x0a; CHIP REV 0xa0;  PCI-E
    miibus0:  <MII bus> on bge0
details boot log via option 2 no ACPI:
liveboot ok
ppc0 parallel port not found
    cd9660 dev/cd0 invalid argument
then comes online , multiboots, multfilesystems verified Linux,DOS,Hammer same disk same time
intermittent dell switch compatibilization via switch powerconnect 2716/ethernet failed status no carrier, /bge0 no link, ifconfig 0.0.0.0 up, still no link, straight via cable its online instantly
todo:
turbo 3g
switch harmonization
look at bmake output:
..........
7600
...

    bmake: don't know how to make print-summary-data. Stop WARNING (printdepends): the package in wip/dump had problem with /usr/pkg/bin/bmake print-summary-data
    database information for this package will be dropped
    bmake: don't know how to make print-summary-data. Stop. unknown modifier: 'x'
.....7700...

    fredahead.c:38 implicit function declaration
...
>10000 > 5999 previously noted

bmake works, details:
Copyright (c) 2003-2009 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly v2.4.1-RELEASE #4: Wed Sep 30 20:07:33 PDT 2009
    root@test28.backplane.com:/usr/obj/usr/src-misc/sys/DFLYLIVE
TSC clock: 2394065580 Hz, i8254 clock: 1193214 Hz
CPU: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz (2394.02-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  Hyperthreading: 2 logical CPUs
real memory  = 3756367872 (3668328K bytes)
avail memory = 3636994048 (3551752K bytes)
kbd1 at kbdmux0
Pentium Pro MTRR support enabled
fildesc_drvinit() building stdin, stdout, stderr: 
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 13 Entries> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem 0xf2000000-0xf3ffffff,0xe0000000-0xefffffff,0xf5000000-0xf5ffffff irq 5 at device 0.0 on pci1
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 11 at device 26.0 on pci0
usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 10 at device 26.1 on pci0
usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> (vendor 0x8086, dev 0x283a) at device 26.7 irq 9
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x284b) at device 27.0 irq 10
pcib2: <PCIBIOS PCI-PCI bridge> at device 28.0 on pci0
pci11: <PCI bus> on pcib2
pcib3: <PCIBIOS PCI-PCI bridge> at device 28.1 on pci0
pci12: <PCI bus> on pcib3
pci12: <network> (vendor 0x14e4, dev 0x4328) at device 0.0 irq 3
pcib4: <PCIBIOS PCI-PCI bridge> at device 28.3 on pci0
pci13: <PCI bus> on pcib4
pcib5: <PCIBIOS PCI-PCI bridge> at device 28.5 on pci0
pci9: <PCI bus> on pcib5
bge0: <Broadcom BCM5755M Gigabit Ethernet> mem 0xf1bf0000-0xf1bfffff irq 3 at device 0.0 on pci9
bge0: CHIP ID 0xa0020000; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E
alignment check failed
miibus0: <MII bus> on bge0
brgphy0: <BCM5755 10/100/1000baseT PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: MAC address: 00:1c:23:b3:9a:b7
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 11 at device 29.0 on pci0
usb2: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 10 at device 29.1 on pci0
usb3: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 9 at device 29.2 on pci0
usb4: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> (vendor 0x8086, dev 0x2836) at device 29.7 irq 11
pcib6: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci3: <PCI bus> on pcib6
cbb0: <PCI-CardBus Bridge> irq 9 at device 1.0 on pci3
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: vendor=1217, dev=f7
fwohci0: <1394 Open Host Controller Interface> mem 0xf1afe800-0xf1afefff,0xf1aff000-0xf1afffff irq 9 at device 1.4 on pci3
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 8.
fwohci0: EUI64 47:4f:c0:00:02:6a:ac:70
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
fwe0: MAC address: 46:4f:c0:6a:ac:70
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ATA controller> port 0x6fa0-0x6faf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 5 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
uhub5: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 2> on uhub4
acd0: DVDR <Optiarc DVD+/-RW AD-5560A/DD11> at ata0-master UDMA33
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH8M SATA300 controller> port 0xeff0-0xefff,0x6ee0-0x6eef,0x6ec8-0x6ecb,0x6ec0-0x6ec7,0x6eb8-0x6ebb,0x6eb0-0x6eb7 irq 10 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
uhub5: 4 ports with 3 removable, self powered
ad4: 152627MB <Seagate ST9160823AS 3.ADC> at ata2-master SATA300
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x283e) at device 31.3 irq 3
orm0: <Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcffff on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
intr 9 at 40001/40000 hz, livelocked limit engaged!
sched_ithd: stray interrupt 7 on cpu 0
sched_ithd: stray interrupt 7 on cpu 0
sched_ithd: stray interrupt 7 on cpu 0
sched_ithd: stray interrupt 7 on cpu 0
sched_ithd: stray interrupt 7 on cpu 0
sched_ithd: stray interrupt 7 on cpu 0
sched_ithd: stray interrupt 7 on cpu 0
sched_ithd: stray interrupt 7 on cpu 0
sched_ithd: 10 stray interrupts 7 on cpu 0 - there will be no further reports
ugen0: <O2 O2Micro CCID SC Reader, class 0/0, rev 1.10/1.10, addr 3> on uhub5
ip: MPSAFE
arp: MPSAFE
CAM: Configuring 5 busses
CAM: finished configuring all busses (0 left)
cd0 at ata0 bus 0 target 0 lun 0
cd0: <Optiarc DVD+-RW AD-5560A DD11> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
intr 9 at 0/20000 hz, livelock removed
Mounting root from hammer:serno/5NK0J13Z.s1d
tryroot serno/5NK0J13Z.s1d
Mounting devfs