--- /dev/null
+DragonFly bop.ideasyncratic.net 2.5.1-DEVELOPMENT DragonFly v2.5.1.134.g04709-DEVELOPMENT #0: Mon Oct 26 19:04:51 CDT 2009 elijah@bop.ideasyncratic.net:/usr/obj/usr/src/sys/GENERIC i386
+
+Installed from late October 2009 snapshot usb image.
+
+At the bootloader, select option "7. Escape to loader prompt", then
+
+>load ehci
+
+>boot
+
+***
+Ethernet works. Wireless does not work. Sound not tested. X11 not tested. Suspend/Resume not tested.
+****
+
+***
+### pciconf -l -v
+ hostb0@pci0:0:0:0: class=0x060000 card=0x02b01028 chip=0x27ac8086 rev=0x03 hdr=0x00
+ vendor = 'Intel Corporation'
+ device = 'Mobile 945GME Express Processor to DRAM Controller'
+ class = bridge
+ subclass = HOST-PCI
+ vgapci0@pci0:0:2:0: class=0x030000 card=0x02b01028 chip=0x27ae8086 rev=0x03 hdr=0x00
+ vendor = 'Intel Corporation'
+ device = 'Mobile 945 Express Chipset Family'
+ class = display
+ subclass = VGA
+ vgapci1@pci0:0:2:1: class=0x038000 card=0x02b01028 chip=0x27a68086 rev=0x03 hdr=0x00
+ vendor = 'Intel Corporation'
+ device = 'Mobile 945GM/GU Express Integrated Graphics Controller'
+ class = display
+ none0@pci0:0:27:0: class=0x040300 card=0x02b01028 chip=0x27d88086 rev=0x02 hdr=0x00
+ vendor = 'Intel Corporation'
+ device = '82801G (ICH7 Family) High Definition Audio'
+ class = multimedia
+ subclass = HDA
+ pcib1@pci0:0:28:0: class=0x060400 card=0x02b01028 chip=0x27d08086 rev=0x02 hdr=0x01
+ vendor = 'Intel Corporation'
+ device = '82801G (ICH7 Family) PCIe Root Port'
+ class = bridge
+ subclass = PCI-PCI
+ pcib2@pci0:0:28:1: class=0x060400 card=0x02b01028 chip=0x27d28086 rev=0x02 hdr=0x01
+ vendor = 'Intel Corporation'
+ device = '82801G (ICH7 Family) PCIe Root Port'
+ class = bridge
+ subclass = PCI-PCI
+ pcib3@pci0:0:28:2: class=0x060400 card=0x02b01028 chip=0x27d48086 rev=0x02 hdr=0x01
+ vendor = 'Intel Corporation'
+ device = '82801G (ICH7 Family) PCIe Root Port'
+ class = bridge
+ subclass = PCI-PCI
+ uhci0@pci0:0:29:0: class=0x0c0300 card=0x02b01028 chip=0x27c88086 rev=0x02 hdr=0x00
+ vendor = 'Intel Corporation'
+ device = '82801G (ICH7 Family) USB Universal Host Controller'
+ class = serial bus
+ subclass = USB
+ uhci1@pci0:0:29:1: class=0x0c0300 card=0x02b01028 chip=0x27c98086 rev=0x02 hdr=0x00
+ vendor = 'Intel Corporation'
+ device = '82801G (ICH7 Family) USB Universal Host Controller'
+ class = serial bus
+ subclass = USB
+ uhci2@pci0:0:29:2: class=0x0c0300 card=0x02b01028 chip=0x27ca8086 rev=0x02 hdr=0x00
+ vendor = 'Intel Corporation'
+ device = '82801G (ICH7 Family) USB Universal Host Controller'
+ class = serial bus
+ subclass = USB
+ uhci3@pci0:0:29:3: class=0x0c0300 card=0x02b01028 chip=0x27cb8086 rev=0x02 hdr=0x00
+ vendor = 'Intel Corporation'
+ device = '82801G (ICH7 Family) USB Universal Host Controller'
+ class = serial bus
+ subclass = USB
+ none1@pci0:0:29:7: class=0x0c0320 card=0x02b01028 chip=0x27cc8086 rev=0x02 hdr=0x00
+ vendor = 'Intel Corporation'
+ device = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
+ class = serial bus
+ subclass = USB
+ pcib4@pci0:0:30:0: class=0x060401 card=0x02b01028 chip=0x24488086 rev=0xe2 hdr=0x01
+ vendor = 'Intel Corporation'
+ device = '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to PCI Bridge'
+ class = bridge
+ subclass = PCI-PCI
+ isab0@pci0:0:31:0: class=0x060100 card=0x02b01028 chip=0x27b98086 rev=0x02 hdr=0x00
+ vendor = 'Intel Corporation'
+ device = '82801GBM (ICH7-M) LPC Interface Controller'
+ class = bridge
+ subclass = PCI-ISA
+ atapci0@pci0:0:31:1: class=0x01018a card=0x02b01028 chip=0x27df8086 rev=0x02 hdr=0x00
+ vendor = 'Intel Corporation'
+ device = '82801G (ICH7 Family) Ultra ATA Storage Controller'
+ class = mass storage
+ subclass = ATA
+ none2@pci0:0:31:3: class=0x0c0500 card=0x02b01028 chip=0x27da8086 rev=0x02 hdr=0x00
+ vendor = 'Intel Corporation'
+ device = '82801G (ICH7 Family) SMBus Controller'
+ class = serial bus
+ subclass = SMBus
+ none3@pci0:2:0:0: class=0x088000 card=0x02b01028 chip=0x2382197b rev=0x00 hdr=0x00
+ vendor = 'JMicron Technology Corp.'
+ device = 'JMB38X JMB38X SD/MMC Host Controller'
+ class = base peripheral
+ none4@pci0:2:0:2: class=0x080501 card=0x02b01028 chip=0x2381197b rev=0x00 hdr=0x00
+ vendor = 'JMicron Technology Corp.'
+ device = 'Standard SD Host Controller'
+ class = base peripheral
+ subclass = SD host controller
+ none5@pci0:2:0:3: class=0x088000 card=0x02b01028 chip=0x2383197b rev=0x00 hdr=0x00
+ vendor = 'JMicron Technology Corp.'
+ device = 'JMB38X JMB38X MS Host Controller'
+ class = base peripheral
+ none6@pci0:3:0:0: class=0x028000 card=0x04b514e4 chip=0x431514e4 rev=0x01 hdr=0x00
+ vendor = 'Broadcom Corporation'
+ device = 'BCM4315/BCM22062000 Broadcom Wireless b/g'
+ class = network
+ re0@pci0:4:0:0: class=0x020000 card=0x02b01028 chip=0x813610ec rev=0x02 hdr=0x00
+ vendor = 'Realtek Semiconductor'
+ device = 'RTL8100-8101E-8102E-PCIEXPRESS RTL8100E/RTL8101E/RTL8102E-GR'
+ class = network
+ subclass = ethernet
+***
+
+### dmesg
+***
+ Copyright (c) 2003-2009 The DragonFly Project.
+ Copyright (c) 1992-2003 The FreeBSD Project.
+ Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
+ The Regents of the University of California. All rights reserved.
+ DragonFly v2.5.1.134.g04709-DEVELOPMENT #0: Mon Oct 26 19:04:51 CDT 2009
+ elijah@bop.ideasyncratic.net:/usr/obj/usr/src/sys/GENERIC
+ TSC clock: 1596037272 Hz, i8254 clock: 1193209 Hz
+ CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (1596.01-MHz 686-class CPU)
+ Origin = "GenuineIntel" Id = 0x106c2 Stepping = 2
+ Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
+ Features2=0x40c39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE>
+ Hyperthreading: 2 logical CPUs
+ real memory = 1064108032 (1039168K bytes)
+ avail memory = 1018646528 (994772K bytes)
+ kbd1 at kbdmux0
+ Pentium Pro MTRR support enabled
+ md0: Malloc disk
+ ACPI: RSDP 0xf7f70 00024 (v2 PTLTD )
+ ACPI: XSDT 0x3f6dc059 0006C (v1 PTLTD XSDT 06040000 LTP 00000000)
+ ACPI: FACP 0x3f6e1d48 000F4 (v3 INTEL CALISTGA 06040000 ALAN 00000001)
+ ACPI: DSDT 0x3f6dcf3e 04D96 (v1 INTEL CALISTGA 06040000 INTL 20050624)
+ ACPI: FACS 0x3f6e2fc0 00040
+ ACPI: APIC 0x3f6e1e3c 00068 (v1 INTEL CALISTGA 06040000 LOHR 0000005A)
+ ACPI: HPET 0x3f6e1ea4 00038 (v1 INTEL CALISTGA 06040000 LOHR 0000005A)
+ ACPI: MCFG 0x3f6e1edc 0003C (v1 INTEL CALISTGA 06040000 LOHR 0000005A)
+ ACPI: TCPA 0x3f6e1f18 00032 (v1 PTLTD CALISTGA 06040000 PTL 00000001)
+ ACPI: TMOR 0x3f6e1f4a 00026 (v1 PTLTD 06040000 PTL 00000003)
+ ACPI: APIC 0x3f6e1f70 00068 (v1 PTLTD APIC 06040000 LTP 00000000)
+ ACPI: BOOT 0x3f6e1fd8 00028 (v1 PTLTD $SBFTBL$ 06040000 LTP 00000001)
+ ACPI: SSDT 0x3f6dc0c5 004F6 (v2 PmRef CpuPm 00003000 INTL 20050624)
+ npx0: <math processor> on motherboard
+ npx0: INT 16 interface
+ Using XMM optimized bcopy/copyin/copyout
+ acpi0: <PTLTD XSDT> on motherboard
+ acpi0: Power Button (fixed)
+ Warning: ACPI is disabling APM's device. You can't run both
+ $PIR: checksum failed!
+ acpi_ec0: <Embedded Controller: GPE 0x19> port 0x66,0x62 on acpi0
+ acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
+ cpu0: <ACPI CPU> on acpi0
+ cpu_cst0: <ACPI CPU C-State> on cpu0
+ ACPI: SSDT 0x3f6dc5bb 005E5 (v2 PmRef Cpu0Cst 00003001 INTL 20050624)
+ ACPI: SSDT 0x3f6dcc25 00245 (v2 PmRef Cpu0Ist 00003000 INTL 20050624)
+ cpu_pst0: <ACPI CPU P-State> on cpu0
+ acpi_tz0: <Thermal Zone> on acpi0
+ acpi_lid0: <Control Method Lid Switch> on acpi0
+ acpi_button0: <Power Button> on acpi0
+ acpi_button1: <Sleep Button> on acpi0
+ acpi_acad0: <AC Adapter> on acpi0
+ battery0: <ACPI Control Method Battery> on acpi0
+ atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
+ atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
+ kbd0 at atkbd0
+ ACPI: domain0 misses processors, should be 2, got 1
+ psm0: failed to get data.
+ psm0: <PS/2 Mouse> irq 12 on atkbdc0
+ psm0: model Generic PS/2 mouse, device ID 0
+ cryptosoft0: <software crypto> on motherboard
+ pcib0: <Host to PCI bridge> pcibus 0 on motherboard
+ pci0: <PCI bus> on pcib0
+ vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf0300000-0xf033ffff,0xd0000000-0xdfffffff,0xf0000000-0xf007ffff irq 7 at device 2.0 on pci0
+ agp0: <Intel 945GME SVGA controller> on vgapci0
+ agp0: detected 7932k stolen memory
+ agp0: aperture size is 256M
+ vgapci1: <VGA-compatible display> mem 0xf0080000-0xf00fffff at device 2.1 on pci0
+ pci0: <multimedia, HDA> (vendor 0x8086, dev 0x27d8) at device 27.0 irq 10
+ pcib1: <PCI-PCI bridge> irq 11 at device 28.0 on pci0
+ pcib1: Disable PCI Express hot-plug interrupts(0x0008)
+ pci2: <PCI bus> on pcib1
+ pci2: <base peripheral> (vendor 0x197b, dev 0x2382) at device 0.0 irq 7
+ pci2: <base peripheral, SD host controller> (vendor 0x197b, dev 0x2381) at device 0.2 irq 7
+ pci2: <base peripheral> (vendor 0x197b, dev 0x2383) at device 0.3 irq 7
+ pcib2: <PCI-PCI bridge> irq 7 at device 28.1 on pci0
+ pcib2: Disable PCI Express hot-plug interrupts(0x0008)
+ pci3: <PCI bus> on pcib2
+ pci3: <network> (vendor 0x14e4, dev 0x4315) at device 0.0 irq 11
+ pcib3: <PCI-PCI bridge> irq 11 at device 28.2 on pci0
+ pcib3: Disable PCI Express hot-plug interrupts(0x0008)
+ pci4: <PCI bus> on pcib3
+ re0: <RealTek 810x PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xf0600000-0xf060ffff,0xf0610000-0xf0610fff irq 11 at device 0.0 on pci4
+ re0: Hardware rev. 0x24800000; MAC ver. 0x15; PCI-E 125MHz
+ miibus0: <MII bus> on re0
+ rlphy0: <RTL8201L 10/100 media interface> on miibus0
+ rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
+ re0: MAC address: 00:21:70:f6:8c:ed
+ uhci0: <Intel 82801G (ICH7) USB controller> port 0x1820-0x183f irq 5 at device 29.0 on pci0
+ usb0: <Intel 82801G (ICH7) USB controller> on uhci0
+ usb0: USB revision 1.0
+ uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
+ uhub0: 2 ports with 2 removable, self powered
+ uhci1: <Intel 82801G (ICH7) USB controller> port 0x1840-0x185f irq 10 at device 29.1 on pci0
+ usb1: <Intel 82801G (ICH7) USB controller> on uhci1
+ usb1: USB revision 1.0
+ uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
+ uhub1: 2 ports with 2 removable, self powered
+ uhci2: <Intel 82801G (ICH7) USB controller> port 0x1860-0x187f irq 11 at device 29.2 on pci0
+ usb2: <Intel 82801G (ICH7) USB controller> on uhci2
+ usb2: USB revision 1.0
+ uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
+ uhub2: 2 ports with 2 removable, self powered
+ uhci3: <Intel 82801G (ICH7) USB controller> port 0x1880-0x189f irq 7 at device 29.3 on pci0
+ usb3: <Intel 82801G (ICH7) USB controller> on uhci3
+ usb3: USB revision 1.0
+ uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
+ uhub3: 2 ports with 2 removable, self powered
+ pci0: <serial bus, USB> (vendor 0x8086, dev 0x27cc) at device 29.7 irq 5
+ pcib4: <PCI-PCI bridge> at device 30.0 on pci0
+ pci5: <PCI bus> on pcib4
+ isab0: <PCI-ISA bridge> at device 31.0 on pci0
+ isa0: <ISA bus> on isab0
+ atapci0: <Intel ICH7 UDMA100 controller> port 0x1810-0x181f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
+ ata0: <ATA channel 0> on atapci0
+ ad0: FAILURE - SETFEATURES ENABLE RCACHE status=51<READY,DSC,ERROR> error=1<ILLEGAL_LENGTH>
+ ad0: 14694MB <STEC PATA 16GB E5221-10> at ata0-master UDMA100
+ ata1: <ATA channel 1> on atapci0
+ pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x27da) at device 31.3 irq 10
+ orm0: <Option ROMs> at iomem 0xcf000-0xcffff,0xe0000-0xe17ff on isa0
+ pmtimer0 on isa0
+ fdc0: ready for input in output
+ fdc0: cmd 3 failed at out byte 1 of 3
+ vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
+ sc0: <System console> at flags 0x100 on isa0
+ sc0: VGA <16 virtual consoles, flags=0x300>
+ sio0: can't drain, serial port might not exist, disabling
+ sio1: can't drain, serial port might not exist, disabling
+ ppc0: parallel port not found.
+ ip: MPSAFE
+ arp: MPSAFE
+ CAM: Configuring 2 busses
+ CAM: finished configuring all busses (0 left)
+ Mounting root from ufs:/dev/serno/STM0000C03CF.s1a
+ tryroot serno/STM0000C03CF.s1a
+ Mounting devfs
+***
projects / ikiwiki.git / commitdiff