From: varialus Date: Tue, 29 Jul 2014 03:34:22 +0000 (+0000) Subject: Added dfly config walkthrough, removed deprecated walkthrough X-Git-Url: https://gitweb.dragonflybsd.org/ikiwiki.git/commitdiff_plain/5a38262a5c84fe52ccb0acd94749a90de4c5c289 Added dfly config walkthrough, removed deprecated walkthrough --- diff --git a/varialus/index.mdwn b/varialus/index.mdwn index a0778a11..3fcb34fc 100644 --- a/varialus/index.mdwn +++ b/varialus/index.mdwn @@ -6,16 +6,12 @@ 1. **Featured** -* (In Progress) Walkthrough of DragonFly BSD Installation and Configuration +* Walkthrough of DragonFly BSD Installation and Configuration * (Not Yet Started) Walkthrough of Xfce Installation and Configuration * (Not Yet Started) Walkthrough of Applications Installation and Configuration * (Not Yet Started) Walkthrough of C and Go Development Environment Installation and Configuration -2. **Deprecated** - -* Walkthrough of Xfce 4.6 Installation via Custom DVD/IMG Installer - -3. **Tidbits** +2. **Tidbits** * Shell/Console/Command-Line-Prompt: tcsh/bash, ctrl-d/tab-tab, partial-previous-command-up-key/ctrl-r-partial-previous-command, rehash * Package-Management: pkgin/apt-get @@ -32,7 +28,7 @@ * Text-Editor: ee/nano * Networking: Debian resolv.conf -4. **Issues** +3. **Issues** * Disclaimer * Default GUI Too Bare @@ -51,7 +47,7 @@ * Wiki Centered Text * XOrg Quit Errors -5. **Workarounds** +4. **Workarounds** * Enable Caps Lock in GUI * Install Non-GUI on 3TB+ Hard Drive @@ -60,14 +56,14 @@ * Install Xfce 4.10 (Stub) * Set GUI Keyboard Layout -6. **Contribute** +5. **Contribute** * Port VirtualBox to DragonFly BSD * Port Xfce 4.10 to DragonFly BSD * DragonFly BSD Network Shares Walkthrough * Port bxpkg to DragonFly BSD -7. **Not Yet Formatted Text Dump** +6. **Not Yet Formatted Text Dump** * Project HAMMER Debian @@ -119,7 +115,8 @@ This walkthrough describes how I install and configure DragonFly BSD. You should login: _ 6. Type 'installer' without quotes and press enter. -7. You will be greeted with the following menu. + +7. The following menu will be displayed. F10=Refresh Display . . @@ -148,8 +145,10 @@ This walkthrough describes how I install and configure DragonFly BSD. You should Install DragonFly BSD on a HDD or HDD partition on this computer . 8. The bottom line changes depending on which option is selected. + 9. Highlight the option < Install DragonFly BSD > and press enter. -10. You will be greeted by the following menu. + +10. The following menu will be displayed. F10=Refresh Display . . @@ -179,6 +178,7 @@ This walkthrough describes how I install and configure DragonFly BSD. You should . 11. Highlight the option < Install DragonFly BSD > and press enter. + 12. The following menu, specific to your hardware, will be displayed. F10=Refresh Display . @@ -208,6 +208,7 @@ This walkthrough describes how I install and configure DragonFly BSD. You should . 13. Highlight the disk on which to install DragonFly BSD and press Enter. + 14. The following menu will be displayed. F10=Refresh Display . @@ -237,6 +238,7 @@ This walkthrough describes how I install and configure DragonFly BSD. You should . 15. If you would like to use your entire disk, then highlight < Use Entire Disk > and press enter. + 16. The following menu will be displayed. F10=Refresh Display . @@ -266,6 +268,7 @@ This walkthrough describes how I install and configure DragonFly BSD. You should . 17. If you are absolutely sure, highlight < OK > and press enter. + 18. The following menu will be displayed. F10=Refresh Display . @@ -295,6 +298,7 @@ This walkthrough describes how I install and configure DragonFly BSD. You should . 19. Press enter. + 20. The following menu will be displayed. F10=Refresh Display . @@ -324,6 +328,7 @@ This walkthrough describes how I install and configure DragonFly BSD. You should . 21. If you want to use HAMMER, and honestly why wouldn't you, then highlight HAMMER and press enter. + 22. The following menu will be displayed. F10=Refresh Display . @@ -353,6 +358,7 @@ This walkthrough describes how I install and configure DragonFly BSD. You should . 23. Highlight < Accept and Create > and press enter. + 24. The following menu will be displayed. F10=Refresh Display . @@ -383,6 +389,7 @@ This walkthrough describes how I install and configure DragonFly BSD. You should . 25. Highlight < Begin Installing Files > and press enter. + 26. The following progress bar will be displayed. F10=Refresh Display . @@ -440,6 +447,7 @@ This walkthrough describes how I install and configure DragonFly BSD. You should The disk on which you wish to install a bootblock . 28. Highlight < Accept and Install Bootblocks > and press enter. + 29. The following dialog box will be displayed. F10=Refresh Display . @@ -469,6 +477,7 @@ This walkthrough describes how I install and configure DragonFly BSD. You should . 30. Press enter. + 31. The following menu will be displayed. F10=Refresh Display . @@ -491,6 +500,7 @@ This walkthrough describes how I install and configure DragonFly BSD. You should ----------------------------------------------------------------- . 32. Highlight < Configure this System > and press enter. + 33. The following menu will be displayed. F10=Refresh Display . @@ -517,108 +527,89 @@ This walkthrough describes how I install and configure DragonFly BSD. You should . . . - . +Set the Time Zone of your physical location . 34. Highlight < Select timezone > and press enter. -35. In Progress - -## Deprecated - -**Walkthrough of Xfce 4.6 Installation via Custom DVD/IMG Installer** - -There is a new [Xfce based DVD/IMG installer](http://island.quantumachine.net/~swildner/LiveDVD/x86_64/) which is built by [one of](http://leaf.dragonflybsd.org/mailarchive/users/2012-07/msg00123.html) the [DragonFly BSD team members](http://www.dragonflybsd.org/team/). As far as I can tell it is functionally identical to the official GUI installer except that it includes the Xfce 4.6 desktop environment rather than the FVWM window manager. Please help test it out so that we can hopefully get it included in the next stable release! - -1. Download and extract the [Xfce installer](http://island.quantumachine.net/~swildner/LiveDVD/). -2. If the version of the installer is less than or equal to 20120826-2055, then installing onto a uniprocessor computer may not work. -3. If installing onto a VirtualBox virtual machine, the recommended operating system type is FreeBSD (64 bit). -4. If installing onto a VirtualBox virtual machine, set the hardware clock to UTC time. -5. After starting the computer but before it finishes booting, you will be greeted with the following boot menu. - - - DragonFly/i386 bootstrap loader, Revision 1.1 - (s@advancer.yo, Sun Aug 26 21:24:11 CEST 2012) - | - 1. Boot DragonFly [kernel] | ,--, | ,--, - 2. Boot DragonFly in Safe Mode | | `-, ,^, ,-' | - 3. Boot DragonFly without AHCI driver | `, `-, (/ \) ,-' ,' - 4. Boot DragonFly without ACPI driver | `-, `-,/ \,-' ,-' - 9. Escape to loader prompt (also ESC) | `------( )------' - s. Boot DragonFly in single user mode | ,----------( )----------, - v. Boot DragonFly with verbose logging | | _,-( )-,_ | - R. Reboot | `-,__,-' \ / `-,__,-' - | | | - | | | - | | | - | | | - | | | - | | | - | `|' - | - Booting in 10 seconds... _ -6. After the computer finishes booting, you will be greeted with the following welcome message and login prompt. - - Welcome to DragonFly! - - To Start the installer, login as 'installer'. To just get a shell prompt, - login as 'root'. To start a root gui, login as 'root' and run 'startx'. - - DragonFly/x86_64 (dflyd.yo) (ttyv0) - - login: _ - -7. Type 'installer' without quotes and press enter. -8. You will be greeted with the following menu. +35. The following menu will be displayed. F10=Refresh Display . . ,--, | ,--, . - ------------------------| Welcome to DragonFly BSD |------------------------- . - | |. - | Welcome to the DragonFly BSD Live CD. |. - | |. - | DragonFly BSD is an efficient and elegant BSD Unix-derived operating |. - | system. For more information, see http://www.dragonflybsd.org |. - | |. - | From this CD, you can boot into DragonFly BSD ``live'' (without installing |. - | it) to evaluate it, to install it manually, or to troubleshoot problems |. - | with an existing installation, using either a command prompt or menu-driven |. - | utilities. |. - | |. - | Also, you can use this automated application to assist you in installing |. - | DragonFly BSD on this computer and configuring it once it is installed. |. - | |. - | < Install DragonFly BSD >_ < Configure an Installed System > |. - | < Live CD Utilities > < Exit to Live CD > < Reboot this Computer > |. - | < Setup NetBoot Install Services > |. - ----------------------------------------------------------------------------- . - . - . - Install DragonFly BSD on a HDD or HDD partition on this computer . + | `-, ,^, ,-' | . + `, `-, (/ \) ,-' ,' . + `-, `-,/ \,-' ,-' . + `------( )------' . + ,----------( )----------, . + | Local or UTC (Greenwich Mean Time) clock | )-,_ | . + | |/ `-,__,-' . + | Is this machine's CMOS clock set to | . + | UTC? | . + | | . + | If it is set to local time, or you | . + | don't know, please choose NO here! | . + | | . + | < Yes >_ < No > | . + -------------------------------------------- . + . + . + . + . + . + . + . + +36. Highlight < Yes > and press enter. + +37. The following menu will be displayed. + + F10=Refresh Display ----------| Select Time Zone |---------- . + | # . + | Select a Time Zone appropriate to your #| ,--, . + | physical location. #^, ,-' | . + | # \) ,-' ,' . + | < Africa >_ # \,-' ,-' . + | < America > # )------' . + | < Antarctica > # )----------, . + | < Arctic > # )-,_ | . + | < Asia > # / `-,__,-' . + | < Atlantic > # | . + | < Australia > # | . + | < CET > # | . + | < CST6CDT > # | . + | < EET > # | . + | < EST > # | . + | < EST5EDT > #|' . + | < Etc > # . + | < Europe > * . + | < GMT > * . + | < HST > * . + | < Indian > * . + | < MET > * . + | < MST > * . + ---------------------------------------- . -10. The bottom line changes depending on which option is selected. -11. Highlight the option < Install DragonFly BSD > and press enter. -12. You will then be greeted by the following menu. +38. Highlight < GMT > and press enter. + +39. The following dialog box will be displayed. F10=Refresh Display . . ,--, | ,--, . | `-, ,^, ,-' | . `, `-, (/ \) ,-' ,' . - --------------------------| Begin Installation |----------------------------- . - | |. - | This application will install DragonFly BSD on one of the hard disk drives |. - | attached to this computer. It has been designed to make it easy to install |. - | DragonFly BSD in the typical case. If you have special requirements that |. - | are not addressed by this installer, or if you have problems using it, you |. - | are welcome to install DragonFly BSD manually. To do so select Exit to Live |. - | CD, login as root, and follow the instructions given in the file /README . |. - | |. - | NOTE! As with any installation process, YOU ARE STRONGLY ENCOURAGED TO BACK |. - | UP ANY IMPORTANT DATA ON THIS COMPUTER BEFORE PROCEEDING! |. - | |. - | < Install DragonFly BSD >_ < Return to Welcome Menu > < Exit to Live CD > |. - ----------------------------| Press F1 for Help |---------------------------- . + `-, `-,/ \,-' ,-' . + `------( )------' . + ,----------( )----------, . + | _,-( )-,_ | . + --------| Information |-------- \ / `-,__,-' . + | | | | . + | The Time Zone has been set to | | | . + | /mnt/usr/share/zoneinfo/GMT. | | | . + | | | | . + | < OK >_ | | | . + ------------------------------- | | . + `|' . . . . @@ -626,9 +617,84 @@ There is a new [Xfce based DVD/IMG installer](http://island.quantumachine.net/~s . . . + . + +40. Press enter. + +41. The menu from step 33 will be displayed. + +42. Highlight < Set keyboard map > and press enter. -13. Highlight the option < Install DragonFly BSD > and press enter. -14. The following menu, specific to your hardware, will be displayed. +43. The following menu will be displayed. + + F10=Refresh Display -------| Select Keyboard Map |-------- . + | # . + | Select a keyboard map appropriate to # | ,--, . + | your keyboard layout. #,^, ,-' | . + | #/ \) ,-' ,' . + | < be.iso.acc.kbd >_ # \,-' ,-' . + | < be.iso.kbd > # )------' . + | < bg.bds.ctrlcaps.kbd > * )----------, . + | < bg.phonetic.ctrlcaps.kbd > * )-,_ | . + | < br275.cp850.kbd > * / `-,__,-' . + | < br275.iso.acc.kbd > *| | . + | < br275.iso.kbd > *| | . + | < by.cp1131.kbd > *| | . + | < by.cp1251.kbd > *| | . + | < by.iso5.kbd > *| | . + | < ce.iso2.kbd > *| | . + | < colemak.iso15.acc.kbd > *'|' . + | < cs.latin2.qwertz.kbd > * . + | < cz.iso2.kbd > * . + | < danish.cp865.kbd > * . + | < danish.iso.kbd > * . + | < el.iso07.kbd > * . + | < estonian.cp850.kbd > * . + | < estonian.iso.kbd > * . + -------------------------------------- . + +44. Highlight < us.dvorak.kbd > and press enter. + +45. The menu from step 33 will be displayed. + +46. Highlight < Add a user > and press enter. + +47. The following menu will be displayed. + + F10=Refresh D -------------------| Add user |-------------------- . + | | . + | Here you can add a user to an installed system. | ,--, . + | | ,-' | . + | You can leave the Home Directory, User ID, and | ,-' ,' . + | Login Group fields empty if you want these items |' ,-' . + | to be automatically allocated by the system. |----' . + | |--------, . + | Note: this user's password will appear in the |_ | . + | install log. If this is a problem, please add the | `-,__,-' . + | user manually after rebooting into the installed | . + | system instead. | . + | | . + | Username [_ ] | . + | Real Name [ ] | . + | Password [ ] | . + | Password (Again) [ ] | . + | Shell [/bin/tcsh ] | . + | Home Directory [ ] | . + | User ID [ ] | . + | Login Group [ ] | . + | Other Group Memberships [ ] | . + | | . + | < Accept and Add > < Return to Configure Menu > | . + Enter the use --------------------------------------------------- . + +48. In the following fields type the following values without quotes and then highlight and press enter. + +* Username: 'user' +* Real Name: 'User' +* Password: 'ChangeMe' +* Password (Again): 'ChangeMe' + +49. The following dialog box will be displayed. F10=Refresh Display . . @@ -639,13 +705,13 @@ There is a new [Xfce based DVD/IMG installer](http://island.quantumachine.net/~s `------( )------' . ,----------( )----------, . | _,-( )-,_ | . - ----------------------| Select Disk |----------------------,__,-' . - | | . - | Select a disk on which to install DragonFly BSD | . - | | . - | < ad1: 1337TB at ata0-master UDMA33 >_| . - | < Return to Begin Installation > | . - ----------------------------------------------------------- . + -----| Information |---- ,-' \ / `-,__,-' . + | | | | . + | User `user' was added. | | | . + | | | | . + | < OK >_ | | | . + ------------------------ | | . + | | . `|' . . . @@ -656,66 +722,81 @@ There is a new [Xfce based DVD/IMG installer](http://island.quantumachine.net/~s . . -15. Highlight the disk on which to install DragonFly BSD and press Enter. -16. The following menu will be displayed. +50. Press enter. + +51. The menu from step 33 will be displayed. + +52. Highlight < Set root password > and press enter. + +53. The following menu will be displayed. F10=Refresh Display . . ,--, | ,--, . | `-, ,^, ,-' | . `, `-, (/ \) ,-' ,' . - `-, `-,/ \,-' ,-' . - `------( )------' . - ,----------( )----------, . - ----------------------------| Select Disk |---------------------- | . - | |' . - | Select how much of this disk you want to use for DragonFly BSD | . - | | . - | ad1: 1337TB at ata0-master UDMA33 | . - | | . - | < Use Entire Disk >_ < Use Part of Disk > | . - | < Return to Select Disk > | . - ----------------------------------------------------------------- . - . - . + -------------------| Set Root Password |------------------- ,-' . + | |' . + | Here you can set the super-user (root) password. |----, . + | | | . + | Note: root's new password will appear in the install log. |__,-' . + | If this is a problem, please set root's password manually | . + | after rebooting into the installed system instead. | . + | | . + | Root password [_ ] | . + | Root password again [ ] | . + | | . + | < Accept and Set Password > | . + | < Return to Configure Menu > | . + ----------------------------------------------------------- . . . . . . . + Enter the root password you would like to use . -17. If you would like to use your entire disk, then highlight < Use Entire Disk > and press enter. -18. The following menu will be displayed. +54. In the following fields type the following values without quotes and then highlight and press enter. + +* Root password: 'ChangeMe' +* Root password again: 'ChangeMe' + +55. The following dialog box will be displayed. F10=Refresh Display . . ,--, | ,--, . | `-, ,^, ,-' | . - ------| Are you absolutely sure? |------/ \) ,-' ,' . - | | \,-' ,-' . - | WARNING! ALL data in ALL partitions on | )------' . - | the disk | )----------, . - | | )-,_ | . - | ad1: 1337TB at | / `-,__,-' . - | ata0-master UDMA33 | | . - | | | . - | will be IRREVOCABLY ERASED! | | . - | | | . - | Are you ABSOLUTELY SURE you wish to | | . - | take this action? This is your LAST | | . - | CHANCE to cancel! ||' . - | | . - | < OK >_ < Cancel > | . - ---------------------------------------- . + `, `-, (/ \) ,-' ,' . + `-, `-,/ \,-' ,-' . + `------( )------' . + ,----------( )----------, . + | _,-( )-,_ | . + ------------| Information |----------- \ / `-,__,-' . + | | | | . + | User root password has been changed. | | | . + | | | | . + | < OK >_ | | | . + -------------------------------------- | | . + | | . + `|' . + . + . + . . . . . . -19. If you are absolutely sure, highlight < OK > and press enter. -20. The following menu will be displayed. +56. Press enter. + +57. The menu from step 33 will be displayed. + +58. Highlight < Configure network interfaces > and press enter. + +59. The following menu will be displayed. F10=Refresh Display . . @@ -723,18 +804,18 @@ There is a new [Xfce based DVD/IMG installer](http://island.quantumachine.net/~s | `-, ,^, ,-' | . `, `-, (/ \) ,-' ,' . `-, `-,/ \,-' ,-' . - `------( )------' . - ---------| Information |-------------( )----------, . - | |( )-,_ | . - | The disk |\ / `-,__,-' . - | | | | . - | ad1: 1337TB at | | | . - | ata0-master UDMA33 | | | . - | | | | . - | was formatted. | | | . - | | | | . - | < OK > | `|' . - ------------------------------------ . + ----------| Assign IP Address |---------- )------' . + | | )----------, . + | Please select which interface you would | )-,_ | . + | like to configure: | / `-,__,-' . + | | | . + | < em0 >_ | | . + | < faith0 > | | . + | < lo0 > | | . + | < ppp0 > | | . + | < sl0 > | | . + | < Cancel > ||' . + ----------------------------------------- . . . . @@ -743,8 +824,9 @@ There is a new [Xfce based DVD/IMG installer](http://island.quantumachine.net/~s . . -21. Press enter. -22. The following menu will be displayed. +60. Highlight < em0 > and press enter. + +61. The following menu will be displayed. F10=Refresh Display . . @@ -753,16 +835,16 @@ There is a new [Xfce based DVD/IMG installer](http://island.quantumachine.net/~s `, `-, (/ \) ,-' ,' . `-, `-,/ \,-' ,-' . `------( )------' . - -----------------| Select file system |------------------------, . - | | | . - | Please select the file system you want to use with |,__,-' . - | DragonFly BSD. | . - | | . - | HAMMER is the new DragonFly BSD file system. UFS is the | . - | traditional BSD file system. | . - | | . - | < Use HAMMER >_ < Use UFS > < Return to Select Disk > | . - --------------------------------------------------------- . + --------------| Use DHCP? |-------------- )----------, . + | | )-,_ | . + | DHCP allows the interface to | / `-,__,-' . + | automatically obtain an IP address from | | . + | a nearby DHCP server. | | . + | | | . + | Would you like to enable DHCP for em0? | | . + | | | . + | < Use DHCP >_ < Configure Manually > | | . + ----------------------------------------- |' . . . . @@ -772,37 +854,43 @@ There is a new [Xfce based DVD/IMG installer](http://island.quantumachine.net/~s . . -23. If you want to use HAMMER, and honestly why wouldn't you, then highlight HAMMER and press enter. -24. The following menu will be displayed. +62. Highlight < Use DHCP > and press enter. + +63. The following menu, specific to your hardware and network connection, will be displayed. F10=Refresh Display . . ,--, | ,--, . - --------------------| Create Subpartitions |--------------------- | . - | | ,' . - | Set up the partitions (also knows as just `partitions' in |' . - | BSD tradition) you want to have on this primary partition. In | . - | most cases you should be fine with the default settings. |-, . - | | | . - | For Capacity, use 'M' to indicate megabytes, 'G' to indicate |-' . - | gigabytes, or a single '*' to indicate 'use the remaining space | . - | on the primary partition'. | . - | | . - | Mountpoint Capacity Encrypted | . - | [/boot_ ] [768M ] [ ] < Ins > < Del > | . - | [swap ] [2048M ] [ ] < Ins > < Del > | . - | [/ ] [* ] [ ] < Ins > < Del > | . - | < Add > | . - | | . - | < Accept and Create > < Return to Select Disk > | . - -------------------| Press F1 for Help |------------------------- . - . + -------------| Information |------------- ^, ,-' | . + | | \) ,-' ,' . + | em0: | \,-' ,-' . + | flags=8843 mtu 1500 | )----------, . + | options=1b | / `-,__,-' . + | inet6 fe80::a00:27ff:fe98:67cc%em0 | | . + | prefixlen 64 scopeid 0x1 | | . + | inet 10.0.2.15 netmask 0xffffff00 | | . + | broadcast 10.0.2.255 | | . + | ether 08:00:27:98:67:cc | | . + | media: Ethernet autoselect (1000baseT | | . + | ) ||' . + | status: active | . + | | . + | | . + | < OK >_ | . + ----------------------------------------- . . . . -25. Highlight < Accept and Create > and press enter. -26. The following menu will be displayed. +64. Press enter. + +65. The menu from step 33 will be displayed. + +66. Highlight < Configure hostname and domain > and press enter. + +67. The following menu will be displayed. F10=Refresh Display . . @@ -810,29 +898,40 @@ There is a new [Xfce based DVD/IMG installer](http://island.quantumachine.net/~s | `-, ,^, ,-' | . `, `-, (/ \) ,-' ,' . `-, `-,/ \,-' ,-' . - -------------------------| Install OS |-------------------------- . - | |-, . - | Everything is now ready to install the actual files which | | . - | comprise the DragonFly BSD operating system on the selected |-' . - | partition of the selected disk. | . - | | . - | Note that this process will take quite a while to finish. You | . - | may wish to take a break now and come back to the computer in a | . - | short while. | . - | | . - | < Begin Installing Files >_ < Return to Create Subpartitions > | . - ----------------------------------------------------------------- . - . - . + `------( )------' . + -------| Set Hostname/Domain |-------- )----------, . + | | )-,_ | . + | Please enter this machine's hostname | / `-,__,-' . + | and domain name. || | . + | || | . + | Hostname [_ ] || | . + | Domain [ ] || | . + | || | . + | || | . + | < OK > < Cancel > |`|' . + -------------------------------------- . . . . . . . + Enter the Hostname (e.g. `machine') . + +68. In the following fields type the following values without quotes and then highlight and press enter. + +* Hostname: 'dfly' +* Domain: 'localhost' -27. Highlight < Begin Installing Files > and press enter. -28. The following progress bar will be displayed. +69. The menu from step 33 will be displayed. + +70. Highlight < Return to Welcome Menu > and press enter. + +71. The menu from step 7 will be displayed. + +72. Highlight < Reboot this Computer > and press enter. + +73. The following menu will be displayed. F10=Refresh Display . . @@ -841,17 +940,17 @@ There is a new [Xfce based DVD/IMG installer](http://island.quantumachine.net/~s `, `-, (/ \) ,-' ,' . `-, `-,/ \,-' ,-' . `------( )------' . - ,----------( )----------, . - -------------------| Executing Commands |------------------- | . - | |_,-' . - | /bin/cpdup -o -vvv -u /usr/pkg /mnt/usr/pkg | . - | | . - | [*#################58%# ] | . - | | . - | < Cancel >_ | . - ------------------------------------------------------------ . - `|' . - . + ---------------| Reboot |--------------- )----------, . + | | )-,_ | . + | This machine is about to be shut down. | / `-,__,-' . + | After the machine has reached its | | . + | shutdown state, you may remove the CD | | . + | from the CD-ROM drive tray and press | | . + | Enter to reboot from the HDD. | | . + | | | . + | < Reboot > | | . + | < Return to Welcome Menu > ||' . + ---------------------------------------- . . . . @@ -860,104 +959,79 @@ There is a new [Xfce based DVD/IMG installer](http://island.quantumachine.net/~s . . -29. Go brush your teeth. And don't forget to floss. -30. When it finishes, the following menu will be displayed. +74. Highlight < Reboot > and press enter. - F10=Refresh Display . +75. The following message will be displayed. + + The operating system has halted. + Please press any key to reboot. + +76. Remove the virtual CD installation media from the virtual machine. + +77. Press any key to reboot. Before it finishes booting, the will be greeted with the menu from step 4. + +78. After the computer finishes booting, you will be greeted with the following welcome message and login prompt. + + DragonFly/x86_64 (dfly.localhost) (ttyv0) + + login: _ + +79. Log in as root. + +80. You will be greeted with the following message and shell prompt. + + Copyright (c) 2003-2014 The DragonFly Project. . + Copyright (c) 1992-2003 The FreeBSD Project. . + Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 . + The Regents of the University of California. All rights reserved. . + . + DragonFly v3.8.1-RELEASE (X86_64_GENERIC) #16 Mon Jun 16 21:36:15 PDT 2014 . + . + Welcome to DragonFly! . + . + dfly# _ . + +81. Type 'passwd' without quotes and press enter. + +82. Type in a new root password and press enter and then retype the new root password and press enter again. + +83. Type 'ee /etc/hosts' without quotes and press enter. + +84. Without quotes twice replace 'localhost.my.domain' with 'dfly.localhost'. + +85. Press Ctrl-[, then highlight 'a) leave editor' and press enter, then highlight 'a) save changes' and press enter. + +86. Type 'exit' without quotes and press enter. + +87. Log in as user. + +88. You will be greeted with the following message and shell prompt. + + Copyright (c) 2003-2014 The DragonFly Project. . + Copyright (c) 1992-2003 The FreeBSD Project. . + Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 . + The Regents of the University of California. All rights reserved. . . - ,--, | ,--, . - | `-, ,^, ,-' | . - ---------------| Install Bootblock(s) |----------------,-' ,' . - | | ,-' . - | You may now wish to install bootblocks on one or more |--' . - | disks. If you already have a boot manager installed, |------, . - | you can skip this step (but you may have to configure | | . - | your boot manager separately.) If you installed |-,__,-' . - | DragonFly BSD on a disk other than your first disk, | . - | you will need to put the bootblock on at least your | . - | first disk and the DragonFly disk. | . - | | . - | Disk Drive Install Bootblock? Packet Mode? | . - | [ad1_ ] [X] [X] | . - | | . - | < Accept and Install Bootblocks > | . - | < Skip this Step > | . - -----------------| Press F1 for Help |----------------- . + DragonFly v3.8.1-RELEASE (X86_64_GENERIC) #16 Mon Jun 16 21:36:15 PDT 2014 . . + Welcome to DragonFly! . . + Man pages are divided into section depending on topic. There are 9 different . + sections numbered from 1 (General Commands) to 9 (Kernel Developer's Manual). . + You can get an introduction to each topic by typing . . + man intro . . - The disk on which you wish to install a bootblock . + In other words, to get the intro to general commands, type . + . + man 1 intro . + > _ . + +89. Type 'passwd' without quotes and press enter. + +90. Type 'ChangeMe' without quotes and press enter, then type a new password and press enter, and then retype the new password and press enter again. -31. Highlight < Accept and Install Bootblocks > and press enter. -32. An Information dialog box will be displayed which says: Bootblocks were successfully installed! -33. Press enter. -34. The following menu will be displayed. - - ---| DragonFly BSD is Installed! |-- - | - | Congratulations! - | - | DragonFly BSD has successfully been installed on this computer. - | You may now proceed to configure the installation. Alternately, - | you may wish to reboot the computer and boot into the installed - | system to confirm that it works. - | - | < Configure this System >_ < Reboot > - | < Return to Welcome Menu > - --- - -35. Highlight < Configure this System > and press enter. -36. The following menu will be displayed. - - ---| Configure an Installed System |-- - | - | The options on this menu allow you to - | configure a DragonFly BSD system after - | it has already been installed. - | < Select timezone >_ - | < Set date and time > - | < Set keyboard map > - | < Set root password > - | < Add a user > - | < Configure network interfaces > - | < Configure hostname and domain > - | < Set console font > - | < Set screen map > - | < Remove software packages > - | < Return to Welcome Menu > - --- - -37. Highlight < Select timezone > and press enter. - -(The only purpose of this line is to reduce the indentation of the following bullet points.) - -* Highlight < Set keyboard map > and press enter. -* Highlight < Set root password > and press enter. -* changeme -* Highlight < Add a user > and press enter. -* Password: changeme -* Highlight < Configure network interfaces > and press enter. -* Highlight < Configure hostname and domain > and press enter. -* Highlight < Return to Welcome Menu > and press enter. -* Highlight < Reboot this Computer > and press enter. -* Highlight < Reboot > and press enter. -* Remove installation media. -* The operating system has halted. -* Please press any key to reboot. -* Log in as root. -* Change password. -* ee /etc/hosts -* # Replace hostname and domain with the ones that you chose during configuration. -* ::1 localhost hostname.domain -* 127.0.0.1 localhost hostname.domain -* Ctrl-[ -* a) leave editor -* a) save changes -* exit -* Log in as user. -* Change password. -* startxfce4 (I think that running startx from the root user starts Xfce, but running it from a regular user starts the non-Xfce GUI.) +91. Type 'exit' without quotes and press enter. ## Tidbits * In the default shell, **tcsh**, ctrl-d is equivalent to tab-tab in **bash**, both of which display possible auto completions. If the list of possible auto completions has changed, running the command rehash will update it. Typing part of a previous command and then pressing the up key is equivalent to pressing ctrl-r and then typing part of a previous command, both of which search previously run commands.