From c15aac18786340f4916a0888530fe5b4d4053dae Mon Sep 17 00:00:00 2001 From: Niklas Date: Sat, 20 Feb 2010 12:35:01 -0800 Subject: [PATCH] dmesg view to enable Novatel HSDPA, disable beep and learning local keymap --- docs/user/delld830/index.mdwn | 198 ++++++++++++++++++++++++++++++++-- 1 file changed, 189 insertions(+), 9 deletions(-) diff --git a/docs/user/delld830/index.mdwn b/docs/user/delld830/index.mdwn index 6d50dd9a..e22a5786 100644 --- a/docs/user/delld830/index.mdwn +++ b/docs/user/delld830/index.mdwn @@ -1,14 +1,194 @@ -diskless networked online displays capacity > available DragonFly 2.(2,4).1-RELEASE DragonFly v2.4.1-RELEASE #4: Wed Sep 30 20:07:33 PDT 2009 fluxbox works from (live)bootoption 2 passing curious (nonblocker) output +dmesg: + + Copyright (c) 2003-2009 The DragonFly Project. + Copyright (c) 1992-2003 The FreeBSD Project. + Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 + The Regents of the University of California. All rights reserved. + DragonFly 2.2.0-RELEASE #0: Sun Feb 15 17:55:25 PST 2009 + root@pkgbox.dragonflybsd.org:/build/usr.obj/usr/src/sys/DFLYLIVE + TSC clock: 2394005832 Hz, i8254 clock: 1193185 Hz + CPU: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (2394.02-MHz 686-class CPU) + Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 + Features=0xbfebfbff + Features2=0xe3bd + Hyperthreading: 2 logical CPUs + real memory = 3756367872 (3668328K bytes) + avail memory = 3637329920 (3552080K bytes) + Preloaded elf kernel "/boot/kernel" at 0xc0809000. + Preloaded elf module "/boot/modules/acpi.ko" at 0xc08092ec. + Pentium Pro MTRR support enabled + md0: Malloc disk + pcibios: BIOS version 2.10 + Using $PIR table, 13 entries at 0xc00fa570 + ACPI: RSDP @ 0x0xfbb10/0x0024 (v 2 DELL ) + ACPI: XSDT @ 0x0xdfe5d200/0x0064 (v 1 DELL M08 0x27D80C0B ASL 0x00000061) + ACPI: FACP @ 0x0xdfe5d09c/0x00F4 (v 4 DELL M08 0x27D80C0B ASL 0x00000061) + ACPI: DSDT @ 0x0xdfe5d800/0x63B2 (v 2 INT430 SYSFexxx 0x00001001 INTL 0x20050624) + ACPI: FACS @ 0x0xdfe6c000/0x0040 + ACPI: HPET @ 0x0xdfe5d300/0x0038 (v 1 DELL M08 0x00000001 ASL 0x00000061) + ACPI: APIC @ 0x0xdfe5d400/0x0068 (v 1 DELL M08 0x27D80C0B ASL 0x00000047) + ACPI: ASF! @ 0x0xdfe5d000/0x007E (v 32 DELL M08 0x27D80C0B ASL 0x00000061) + ACPI: MCFG @ 0x0xdfe5d3c0/0x003E (v 16 DELL M08 0x27D80C0B ASL 0x00000061) + ACPI: TCPA @ 0x0xdfe5d700/0x0032 (v 1 0x00000000 ASL 0x00000000) + ACPI: SLIC @ 0x0xdfe5d49c/0x0176 (v 1 DELL M08 0x27D80C0B ASL 0x00000061) + ACPI: SSDT @ 0x0xdfe5b97e/0x04CC (v 1 PmRef CpuPm 0x00003000 INTL 0x20050624) + npx0: on motherboard + npx0: INT 16 interface + Using XMM optimized bcopy/copyin/copyout + acpi0: on motherboard + ACPI: SSDT @ 0x0xdfe6c080/0x0043 (v 1 LMPWR DELLLOM 0x00001001 INTL 0x20050624) + Warning: ACPI is disabling APM's device. You can't run both + acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 + cpu0: on acpi0 + ACPI: SSDT @ 0x0xdfe5be4a/0x05E5 (v 1 PmRef Cpu0Cst 0x00003001 INTL 0x20050624) + ACPI: SSDT @ 0x0xdfe5c4b4/0x02C8 (v 1 PmRef Cpu0Ist 0x00003000 INTL 0x20050624) + acpi_tz0: on acpi0 + acpi_lid0: on acpi0 + acpi_button0: on acpi0 + acpi_button1: on acpi0 + acpi_acad0: on acpi0 + battery0: on acpi0 + battery1: on acpi0 + atkbdc0: port 0x66,0x62,0x64,0x60 irq 1 on acpi0 + atkbd0: flags 0x1 irq 1 on atkbdc0 + kbd0 at atkbd0 + psm0: irq 12 on atkbdc0 + psm0: model GlidePoint, device ID 0 + sio0 port 0x3f8-0x3ff irq 4 on acpi0 + sio0: type 16550A + legacypci0 on motherboard + pcib0: on legacypci0 + pci0: on pcib0 + pcib1: at device 1.0 on pci0 + pci1: on pcib1 + pci1: at 0.0 irq 5 + uhci0: port 0x6f20-0x6f3f irq 11 at device 26.0 on pci0 + usb0: on uhci0 + usb0: USB revision 1.0 + uhub0: on usb0 + uhub0: 2 ports with 2 removable, self powered + uhci1: port 0x6f00-0x6f1f irq 10 at device 26.1 on pci0 + usb1: on uhci1 + usb1: USB revision 1.0 + uhub1: on usb1 + uhub1: 2 ports with 2 removable, self powered + pci0: at 26.7 irq 9 + pci0: (vendor=0x8086, dev=0x284b) at 27.0 irq 10 + pcib2: at device 28.0 on pci0 + pcib2: Disable PCI Express hot-plug interrupts(0x0008) + pci11: on pcib2 + pcib3: at device 28.1 on pci0 + pcib3: Disable PCI Express hot-plug interrupts(0x0008) + pci12: on pcib3 + pci12: (vendor=0x14e4, dev=0x4328) at 0.0 irq 3 + pcib4: at device 28.3 on pci0 + pcib4: Disable PCI Express hot-plug interrupts(0x0008) + pci13: on pcib4 + pcib5: at device 28.5 on pci0 + pcib5: Disable PCI Express hot-plug interrupts(0x0008) + pci9: on pcib5 + bge0: mem 0xf1bf0000-0xf1bfffff irq 3 at device 0.0 on pci9 + bge0: CHIP ID 0xa0020000; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E + miibus0: on bge0 + brgphy0: on miibus0 + brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto + bge0: MAC address: 00:1d:09:ac:e2:3e + uhci2: port 0x6f80-0x6f9f irq 11 at device 29.0 on pci0 + usb2: on uhci2 + usb2: USB revision 1.0 + uhub2: on usb2 + uhub2: 2 ports with 2 removable, self powered + uhci3: port 0x6f60-0x6f7f irq 10 at device 29.1 on pci0 + usb3: on uhci3 + usb3: USB revision 1.0 + uhub3: on usb3 + uhub3: 2 ports with 2 removable, self powered + uhci4: port 0x6f40-0x6f5f irq 9 at device 29.2 on pci0 + usb4: on uhci4 + usb4: USB revision 1.0 + uhub4: on usb4 + uhub4: 2 ports with 2 removable, self powered + pci0: at 29.7 irq 11 + pcib6: at device 30.0 on pci0 + pci3: on pcib6 + cbb0: at device 1.0 on pci3 + cardbus0: on cbb0 + pccard0: <16-bit PCCard bus> on cbb0 + pcib6: routed slot 1 INTA to irq 255 + cbb: Unable to map IRQ... + device_probe_and_attach: cbb0 attach returned 12 + fwohci0: vendor=1217, dev=f7 + fwohci0: <1394 Open Host Controller Interface> mem 0xf1afe800-0xf1afefff,0xf1aff000-0xf1afffff irq 9 at device 1.4 on pci3 + fwohci0: OHCI version 1.10 (ROM=0) + fwohci0: No. of Isochronous channel is 8. + fwohci0: EUI64 47:4f:c0:00:02:6a:ac:70 + fwohci0: Phy 1394a available S400, 1 ports. + fwohci0: Link S400, max_rec 2048 bytes. + firewire0: on fwohci0 + fwe0: on firewire0 + fwe0: MAC address: 46:4f:c0:6a:ac:70 + sbp0: on firewire0 + fwohci0: Initiate bus reset + fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode + firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) + firewire0: bus manager 0 (me) + isab0: at device 31.0 on pci0 + isa0: on isab0 + atapci0: port 0x6fa0-0x6faf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 5 at device 31.1 on pci0 + ata0: on atapci0 + uhub5: on uhub4 + uhub5: 4 ports with 3 removable, self powered + acd0: DVDR at ata0-master UDMA33 + ata1: on atapci0 + atapci1: port 0xeff0-0xefff,0x6ee0-0x6eef,0x6ec8-0x6ecb,0x6ec0-0x6ec7,0x6eb8-0x6ebb,0x6eb0-0x6eb7 irq 10 at device 31.2 on pci0 + ata2: on atapci1 + ata3: on atapci1 + pci0: (vendor=0x8086, dev=0x283e) at 31.3 irq 3 + eisa0: on motherboard + mainboard0: on eisa0 slot 0 + pmtimer0 on isa0 + fdc0: ready for input in output + fdc0: cmd 3 failed at out byte 1 of 3 + vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 + sc0: at flags 0x100 on isa0 + sc0: VGA <16 virtual consoles, flags=0x300> + sio2: can't drain, serial port might not exist, disabling + ppc0: parallel port not found. + ugen0: on uhub0 + ugen1: on uhub1 + ugen2: on uhub5 + Mounting root from cd9660:cd0c + cd0 at ata0 bus 0 target 0 lun 0 + cd0: Removable CD-ROM SCSI-0 device + cd0: 33.000MB/s transfers + cd0: cd present [619632 x 2048 byte records] + (cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 17 22 0 0 1 0 + (cd0:ata0:0:0:0): CAM Status: SCSI Status Error + (cd0:ata0:0:0:0): SCSI Status: Check Condition + (cd0:ata0:0:0:0): MEDIUM ERROR asc:2,0 + (cd0:ata0:0:0:0): No seek complete + (cd0:ata0:0:0:0): Retrying Command (per Sense Data) + (cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 8 95 74 0 0 1 0 + (cd0:ata0:0:0:0): CAM Status: SCSI Status Error + (cd0:ata0:0:0:0): SCSI Status: Check Condition + (cd0:ata0:0:0:0): MEDIUM ERROR asc:2,0 + (cd0:ata0:0:0:0): No seek complete + (cd0:ata0:0:0:0): Retrying Command (per Sense Data) + (cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 3 2d 0 0 1 0 + (cd0:ata0:0:0:0): CAM Status: SCSI Status Error + (cd0:ata0:0:0:0): SCSI Status: Check Condition + (cd0:ata0:0:0:0): MEDIUM ERROR asc:2,0 + (cd0:ata0:0:0:0): No seek complete + (cd0:ata0:0:0:0): Retrying Command (per Sense Data) + (cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 3 27 0 0 1 0 + (cd0:ata0:0:0:0): CAM Status: SCSI Status Error + (cd0:ata0:0:0:0): SCSI Status: Check Condition + (cd0:ata0:0:0:0): MEDIUM ERROR asc:2,0 + (cd0:ata0:0:0:0): No seek complete + (cd0:ata0:0:0:0): Retrying Command (per Sense Data) - cd9660 /dev/cd0: Invalid argument -set ACPI disabled and hardware bios parallell port also disabled since otherwise hangs on ppc0:parallel port not found -Now mainly postsync dd67db98 (lookup) cache, (perfect) process and (why) manual pfi.conf mount -0 edit ACPI /boot/loader.conf debug.acpi.disabled="sysresource" -1 hsdpa turbo 3g & phone harmonizations -2 wire(d,less) networking -3 scannerdriver (canon lide no linux sane) -details and hardware are: +pciconf: dev 70,root;72,var;74,tmp;76,etc;78;dev,80;usr,82;k -- 2.41.0