Merge branch 'vendor/TNFTP'
[dragonfly.git] / Makefile.inc1
CommitLineData
984263bc
MD
1#
2# $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
78792546 3# $DragonFly: src/Makefile.inc1,v 1.118 2008/06/24 20:22:30 thomas Exp $
cecff5c1
MD
4#
5# Build-time options are documented in make.conf(5).
984263bc
MD
6#
7# The intended user-driven targets are:
1397f94a 8#
984263bc 9# buildworld - rebuild *everything*, including glue to help do upgrades
1397f94a
MD
10# quickworld - skip the glue and do a depend+build on the meat
11# realquickworld - skip the glue and depend stages and just build the meat
12# crossworld - only build the glue (particularly the cross-build environment)
984263bc 13# installworld- install everything built by "buildworld"
984263bc
MD
14# most - build user commands, no libraries or include files
15# installmost - install user commands, no libraries or include files
16#
17# Standard targets (not defined here) are documented in the makefiles in
18# /usr/share/mk. These include:
19# obj depend all install clean cleandepend cleanobj
20
21# Put initial settings here.
22SUBDIR=
23
24# We must do share/info early so that installation of info `dir'
25# entries works correctly. Do it first since it is less likely to
26# grow dependencies on include and lib than vice versa.
27.if exists(${.CURDIR}/share/info)
28SUBDIR+= share/info
29.endif
30
31# We must do include and lib early so that the perl *.ph generation
32# works correctly as it uses the header files installed by this.
33.if exists(${.CURDIR}/include)
34SUBDIR+= include
35.endif
36.if exists(${.CURDIR}/lib)
37SUBDIR+= lib
38.endif
17d0fefe
MD
39# This exists simply to ensure that the obj dir hierarchy is
40# intact for nrelease, allowing the nrelease Makefile's to
41# reference ${.OBJDIR}.
42#
43.if exists(${.CURDIR}/nrelease)
44SUBDIR+= nrelease
45.endif
984263bc
MD
46
47.if exists(${.CURDIR}/bin)
48SUBDIR+= bin
49.endif
cecff5c1 50.if exists(${.CURDIR}/games) && !defined(NO_GAMES)
984263bc
MD
51SUBDIR+= games
52.endif
53.if exists(${.CURDIR}/gnu)
54SUBDIR+= gnu
55.endif
984263bc
MD
56.if exists(${.CURDIR}/libexec)
57SUBDIR+= libexec
58.endif
59.if exists(${.CURDIR}/sbin)
60SUBDIR+= sbin
61.endif
cecff5c1 62.if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
984263bc
MD
63SUBDIR+= secure
64.endif
cecff5c1 65.if exists(${.CURDIR}/share) && !defined(NO_SHARE)
984263bc
MD
66SUBDIR+= share
67.endif
68.if exists(${.CURDIR}/sys)
69SUBDIR+= sys
70.endif
71.if exists(${.CURDIR}/usr.bin)
72SUBDIR+= usr.bin
73.endif
74.if exists(${.CURDIR}/usr.sbin)
75SUBDIR+= usr.sbin
76.endif
77
984263bc
MD
78.if exists(${.CURDIR}/etc)
79SUBDIR+= etc
80.endif
81
82# These are last, since it is nice to at least get the base system
83# rebuilt before you do them.
84.if defined(LOCAL_DIRS)
85.for _DIR in ${LOCAL_DIRS}
86.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
87SUBDIR+= ${_DIR}
88.endif
89.endfor
90.endif
91
92.if defined(SUBDIR_OVERRIDE)
93SUBDIR= ${SUBDIR_OVERRIDE}
94.endif
95
96.if defined(NOCLEANDIR)
97CLEANDIR= clean cleandepend
98.else
99CLEANDIR= cleandir
100.endif
101
9974d917
SS
102.if defined(NO_CLEAN)
103NOCLEAN= # defined
104.endif
d0a8f509 105
1397f94a
MD
106# Object directory base in primary make. Note that when we rerun make
107# from inside this file we change MAKEOBJDIRPREFIX to the appropriate
108# subdirectory because the rest of the build system needs it that way.
109# The original object directory base is saved in OBJTREE.
110#
984263bc 111MAKEOBJDIRPREFIX?= /usr/obj
1397f94a
MD
112OBJTREE?= ${MAKEOBJDIRPREFIX}
113
114# Used for stage installs and pathing
115#
116DESTDIRBASE?= ${OBJTREE}${.CURDIR}
117
c89fd520
SS
118# Remove DESTDIR from MAKEFLAGS. It is present in the environment
119# anyhow, and we need to be able to override it for stage installs
120.MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*}
121
79809ae1
SS
122# This sets the compiler we use to build the world/kernel with
123WORLD_CCVER?= gcc41
123dec51 124WORLD_BINUTILSVER?= binutils217
ded5c503 125
b2b3ffcd
SS
126# temporary until everybody has converted to x86_64
127.if ${MACHINE_ARCH} == "amd64"
128MACHINE_ARCH= x86_64
129.makeenv MACHINE_ARCH
130.endif
131
984263bc
MD
132TARGET_ARCH?= ${MACHINE_ARCH}
133.if ${TARGET_ARCH} == ${MACHINE_ARCH}
134TARGET?= ${MACHINE}
135.else
136TARGET?= ${TARGET_ARCH}
137.endif
138.if make(buildworld)
139BUILD_ARCH!= sysctl -n hw.machine_arch
b2b3ffcd
SS
140
141# temporary until everybody has converted to x86_64
142.if ${BUILD_ARCH} == "amd64"
143BUILD_ARCH= x86_64
144.endif
145
984263bc
MD
146.if ${MACHINE_ARCH} != ${BUILD_ARCH}
147.error To cross-build, set TARGET_ARCH.
148.endif
149.endif
1397f94a 150
0955fd91
MD
151# Backwards compatibility with older make's or older sys.mk's. make
152# is expected to define MACHINE_PLATFORM.
153#
154.if !defined(MACHINE_PLATFORM)
155MACHINE_PLATFORM= pc32
156.endif
4d005c1d
SS
157
158# XXX this is ugly and we need to come up with a nicer solution
159.if !defined(TARGET_PLATFORM)
160.if ${TARGET_ARCH} == "i386"
161TARGET_PLATFORM= pc32
b2b3ffcd 162.elif ${TARGET_ARCH} == "x86_64"
4d005c1d
SS
163TARGET_PLATFORM= pc64
164.else
165.error Unknown target architecture.
166.endif
167.endif
0955fd91 168
5f87b7d3
SZ
169THREAD_LIB?= thread_xu
170.if ${THREAD_LIB} == "c_r"
171.if defined(NO_LIBC_R)
172.error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
173.endif
174.endif
175
1397f94a
MD
176# BTOOLS (Natively built) All non-cross-development tools that the
177# main build needs. This includes things like 'mkdir' and 'rm'.
178# We will not use the native system's exec path once we start
179# on WORLD. (bootstrap-tools and build-tools or BTOOLS)
180#
181# CTOOLS (Natively built) Cross development tools which are specific
182# to the target architecture.
183#
184# WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and
185# CTOOLS.
186#
0955fd91
MD
187# MACHINE_PLATFORM Platform Architecture we are building on
188# MACHINE Machine Architecture (usually the same as MACHINE_ARCH)
e2ea6619
MD
189# MACHINE_ARCH Cpu Architecture we are building on
190#
0955fd91
MD
191# TARGET_PLATFORM Platform Architecture we are building for
192# TARGET Machine Architecture we are building for
e2ea6619 193# TARGET_ARCH Cpu Architecture we are building for
1397f94a
MD
194#
195BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH}
196CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
197WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH}
198
79aa78bc
MD
199# The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
200# cross-tools stages to augment the existing command path to access newer
201# versions of certain utilities such as 'patch' that the cross-tools stage
202# might expect.
203#
204BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
205
1397f94a
MD
206# The strict temporary command path contains all binaries required
207# by the buildworld system after the cross-tools stage.
208#
209STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
984263bc
MD
210
211TMPDIR?= /tmp
212TMPPID!= echo $$$$
984263bc
MD
213
214#
215# Building a world goes through the following stages
216#
217# 1. bootstrap-tool stage [BMAKE]
218# This stage is responsible for creating programs that
219# are needed for backward compatibility reasons. They
220# are not built as cross-tools.
221# 2. build-tool stage [TMAKE]
222# This stage is responsible for creating the object
223# tree and building any tools that are needed during
224# the build process.
225# 3. cross-tool stage [XMAKE]
226# This stage is responsible for creating any tools that
227# are needed for cross-builds. A cross-compiler is one
228# of them.
229# 4. world stage [WMAKE]
230# This stage actually builds the world.
231# 5. install stage (optional) [IMAKE]
232# This stage installs a previously built world.
233#
234
984263bc 235# bootstrap-tool stage
1397f94a
MD
236#
237BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
238 OBJTREE=${OBJTREE} \
44831353 239 DESTDIR=${BTOOLSDEST} \
79aa78bc 240 PATH=${BTOOLSPATH}:${PATH} \
984263bc 241 INSTALL="sh ${.CURDIR}/tools/install.sh"
1397f94a 242
984263bc 243BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
e486d225
SS
244 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
245 -DNO_WERROR -DNO_NLS
984263bc
MD
246
247# build-tool stage
1397f94a
MD
248#
249TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
250 OBJTREE=${OBJTREE} \
984263bc 251 DESTDIR= \
79aa78bc 252 PATH=${BTOOLSPATH}:${PATH} \
984263bc 253 INSTALL="sh ${.CURDIR}/tools/install.sh"
1397f94a
MD
254
255TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
e486d225 256 -DNO_FORTRAN -DNOSHARED
984263bc
MD
257
258# cross-tool stage
1397f94a
MD
259#
260# note: TOOLS_PREFIX points to the obj root holding the cross
44831353
MD
261# compiler binaries, while USRDATA_PREFIX points to the obj root
262# holding the target environment (and also determines where cross-built
263# libraries, crt*.o, and include files are installed).
1397f94a
MD
264#
265XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \
266 OBJTREE=${OBJTREE} \
267 DESTDIR=${CTOOLSDEST} \
268 INSTALL="sh ${.CURDIR}/tools/install.sh" \
269 TOOLS_PREFIX=${CTOOLSDEST} \
79aa78bc
MD
270 USRDATA_PREFIX=${WORLDDEST} \
271 PATH=${BTOOLSPATH}:${PATH}
1397f94a 272
44831353 273XMAKE= ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
e486d225 274 -DBOOTSTRAPPING -DNOSHARED
1397f94a
MD
275
276# world stage, note the strict path and note that TOOLS_PREFIX is left
277# unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
278# which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
279# for both binary and library paths, even though it is being compiled to
280# WORLDDEST. None of the programs in the world stage are ever actually
281# executed during the buildworld/installworld.
282#
283CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \
284 OBJTREE=${OBJTREE} \
285 MACHINE_ARCH=${TARGET_ARCH} \
286 MACHINE=${TARGET} \
0955fd91 287 MACHINE_PLATFORM=${TARGET_PLATFORM} \
ded5c503 288 OBJFORMAT_PATH=${CTOOLSDEST} \
ce6fa878 289 HOST_CCVER=${HOST_CCVER} \
123dec51
SS
290 CCVER=${WORLD_CCVER} \
291 BINUTILSVER=${WORLD_BINUTILSVER}
984263bc 292
984263bc 293WMAKEENV= ${CROSSENV} \
1397f94a 294 DESTDIR=${WORLDDEST} \
984263bc 295 INSTALL="sh ${.CURDIR}/tools/install.sh" \
1397f94a
MD
296 PATH=${STRICTTMPPATH}
297
984263bc
MD
298WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1
299
300# install stage
b07b69cc 301#
984263bc 302IMAKEENV= ${CROSSENV} \
1397f94a 303 PATH=${STRICTTMPPATH}
984263bc
MD
304IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1
305
306# kernel stage
b07b69cc
MD
307#
308KMAKEENV= ${WMAKEENV}
984263bc 309
984263bc
MD
310# buildworld
311#
312# Attempt to rebuild the entire system, with reasonable chance of
313# success, regardless of how old your existing system is.
314#
2cde9453
SS
315_worldtmp: _cleantmp _mtreetmp
316.ORDER: _cleantmp _mtreetmp
317
318_cleantmp:
984263bc
MD
319 @echo
320 @echo "--------------------------------------------------------------"
321 @echo ">>> Rebuilding the temporary build tree"
322 @echo "--------------------------------------------------------------"
323.if !defined(NOCLEAN)
1397f94a 324 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
984263bc
MD
325.else
326 # XXX - These two can depend on any header file.
327 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
328 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
329.endif
2cde9453
SS
330
331_mtreetmp:
1397f94a
MD
332 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
333.for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
334 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \
335 -p ${_dir}/ > /dev/null
336 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
337 -p ${_dir}/usr > /dev/null
984263bc 338.endfor
1397f94a
MD
339 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
340 -p ${WORLDDEST}/usr/include > /dev/null
062db326 341 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
1397f94a 342
984263bc
MD
343_bootstrap-tools:
344 @echo
345 @echo "--------------------------------------------------------------"
346 @echo ">>> stage 1: bootstrap tools"
347 @echo "--------------------------------------------------------------"
348 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
349_cleanobj:
984263bc
MD
350 @echo
351 @echo "--------------------------------------------------------------"
1397f94a 352 @echo ">>> stage 2a: cleaning up the object tree"
984263bc
MD
353 @echo "--------------------------------------------------------------"
354 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
984263bc
MD
355_obj:
356 @echo
357 @echo "--------------------------------------------------------------"
1397f94a 358 @echo ">>> stage 2b: rebuilding the object tree"
984263bc
MD
359 @echo "--------------------------------------------------------------"
360 cd ${.CURDIR}; ${WMAKE} par-obj
361_build-tools:
362 @echo
363 @echo "--------------------------------------------------------------"
1397f94a 364 @echo ">>> stage 2c: build tools"
984263bc
MD
365 @echo "--------------------------------------------------------------"
366 cd ${.CURDIR}; ${TMAKE} build-tools
367_cross-tools:
368 @echo
369 @echo "--------------------------------------------------------------"
370 @echo ">>> stage 3: cross tools"
371 @echo "--------------------------------------------------------------"
372 cd ${.CURDIR}; ${XMAKE} cross-tools
373_includes:
374 @echo
375 @echo "--------------------------------------------------------------"
1397f94a 376 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
984263bc
MD
377 @echo "--------------------------------------------------------------"
378 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
379_libraries:
380 @echo
381 @echo "--------------------------------------------------------------"
1397f94a 382 @echo ">>> stage 4b: building libraries"
984263bc
MD
383 @echo "--------------------------------------------------------------"
384 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
385_depend:
386 @echo
387 @echo "--------------------------------------------------------------"
1397f94a 388 @echo ">>> stage 4c: make dependencies"
984263bc
MD
389 @echo "--------------------------------------------------------------"
390 cd ${.CURDIR}; ${WMAKE} par-depend
391everything:
392 @echo
393 @echo "--------------------------------------------------------------"
1397f94a 394 @echo ">>> stage 4d: building everything.."
984263bc
MD
395 @echo "--------------------------------------------------------------"
396 cd ${.CURDIR}; ${WMAKE} all
397
1397f94a
MD
398# note: buildworld no longer depends on _cleanobj because we rm -rf the
399# entire object tree and built the bootstrap tools in a different location.
400#
401# buildworld - build everything from scratch
402# quickworld - skip the bootstrap, build, and cross-build steps
403# realquickworld - skip the bootstrap, build, crossbuild, and depend step.
404#
405# note: we include _obj in realquickworld to prevent accidental creation
406# of files in /usr/src.
984263bc 407
c08b39fe 408WMAKE_TGTS=
984263bc
MD
409.if !defined(SUBDIR_OVERRIDE)
410WMAKE_TGTS+= _worldtmp _bootstrap-tools
411.endif
1397f94a 412WMAKE_TGTS+= _obj _build-tools
984263bc
MD
413.if !defined(SUBDIR_OVERRIDE)
414WMAKE_TGTS+= _cross-tools
415.endif
416WMAKE_TGTS+= _includes _libraries _depend everything
417
418buildworld: ${WMAKE_TGTS}
1397f94a 419
2cde9453 420quickworld: _mtreetmp _obj _includes _libraries _depend everything
1397f94a 421
2cde9453 422realquickworld: _mtreetmp _obj _includes _libraries everything
1397f94a
MD
423
424crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
425
984263bc 426.ORDER: ${WMAKE_TGTS}
9ce30817 427.ORDER: _obj _includes
2cde9453 428.ORDER: _mtreetmp _obj
984263bc
MD
429
430#
431# installcheck
432#
c08b39fe 433# Checks to be sure system is ready for installworld
984263bc
MD
434#
435installcheck:
436.if !defined(NO_SENDMAIL)
f35282e3
MD
437 @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
438 @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
984263bc 439.endif
f35282e3 440 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
f35282e3
MD
441 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; exit 1)
442 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
9b815a46 443.if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
f7ed9937 444 @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; exit 1;; esac
9b815a46 445.endif
984263bc
MD
446#
447# installworld
448#
449# Installs everything compiled by a 'buildworld'.
450#
5cccfb7b 451installworld: installcheck
984263bc 452 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
ec6483ce 453 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/
984263bc
MD
454
455#
456# reinstall
457#
458# If you have a build server, you can NFS mount the source and obj directories
459# and do a 'make reinstall' on the *client* to install new binaries from the
460# most recent server build.
461#
462reinstall:
463 @echo "--------------------------------------------------------------"
464 @echo ">>> Making hierarchy"
465 @echo "--------------------------------------------------------------"
466 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
467 @echo
468 @echo "--------------------------------------------------------------"
469 @echo ">>> Installing everything.."
470 @echo "--------------------------------------------------------------"
471 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
984263bc 472
984263bc 473#
fc7aca3e 474# buildkernel, nativekernel, quickkernel, and installkernel
984263bc
MD
475#
476# Which kernels to build and/or install is specified by setting
477# KERNCONF. If not defined a GENERIC kernel is built/installed.
478# Only the existing (depending TARGET) config files are used
479# for building kernels and only the first of these is designated
480# as the one being installed.
481#
c2c83759
MD
482# You can specify INSTALLSTRIPPED=1 if you wish the installed
483# kernel and modules to be stripped of its debug info (required
484# symbols are left intact). You can specify INSTALLSTRIPPEDMODULES
485# if you only want to strip the modules of their debug info. These
486# only apply if you have DEBUG=-g in your kernel config or make line.
487#
984263bc
MD
488# Note that we have to use TARGET instead of TARGET_ARCH when
489# we're in kernel-land. Since only TARGET_ARCH is (expected) to
490# be set to cross-build, we have to make sure TARGET is set
491# properly.
492
493.if !defined(KERNCONF) && defined(KERNEL)
494KERNCONF= ${KERNEL}
495KERNWARN= yes
496.else
702a95cc
SS
497# XXX makeshift fix to build the right kernel for the (target) architecture
498# We should configure this in the platform files somehow
499.if ${TARGET_ARCH} == "i386"
984263bc 500KERNCONF?= GENERIC
702a95cc 501.else
b2b3ffcd 502KERNCONF?= X86_64_GENERIC
702a95cc 503.endif
984263bc
MD
504.endif
505INSTKERNNAME?= kernel
506
507KRNLSRCDIR= ${.CURDIR}/sys
4e54470f 508KRNLCONFDIR= ${KRNLSRCDIR}/config
984263bc
MD
509KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
510KERNCONFDIR?= ${KRNLCONFDIR}
511
512BUILDKERNELS=
513INSTALLKERNEL=
514.for _kernel in ${KERNCONF}
515.if exists(${KERNCONFDIR}/${_kernel})
516BUILDKERNELS+= ${_kernel}
517.if empty(INSTALLKERNEL)
518INSTALLKERNEL= ${_kernel}
519.endif
520.endif
521.endfor
522
9a359590
MD
523# kernel version numbers survive rm -rf
524#
525.for _kernel in ${BUILDKERNELS}
526.if exists(${KRNLOBJDIR}/${_kernel}/version)
527KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
528.endif
529.endfor
530
984263bc
MD
531#
532# buildkernel
533#
534# Builds all kernels defined by BUILDKERNELS.
535#
fc7aca3e 536bk_tools:
e05c8c84
MD
537 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
538 echo "You must buildworld before buildkernel. If you wish"; \
539 echo "to build a kernel using native tools, config it manually"; \
540 echo "or use the nativekernel target if you are in a rush"; \
541 exit 1; \
c2c83759
MD
542 fi
543
544maybe_bk_tools:
545.for _kernel in ${BUILDKERNELS}
546 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
547 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
548 echo "The kernel was build using buildworld tools which no" ; \
549 echo "longer appear to exist, quickkernel failed!" ; \
550 exit 1; \
551 fi; \
552 fi
553.endfor
e05c8c84 554
fc7aca3e 555bk_build_list:
984263bc
MD
556.if empty(BUILDKERNELS)
557 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
603cdb58 558 @echo ">>> Did you move your kernel configs from i386/conf to config/?"
984263bc
MD
559 @false
560.endif
fc7aca3e
MD
561
562bk_kernwarn:
984263bc
MD
563.if defined(KERNWARN)
564 @echo "--------------------------------------------------------------"
565 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
566 @echo "--------------------------------------------------------------"
567 @sleep 3
568.endif
569 @echo
fc7aca3e
MD
570
571# The buildkernel target rebuilds the specified kernels from scratch
572# using the crossbuild tools generated by the last buildworld. It is
573# the safest (but also the most time consuming) way to build a new kernel.
574#
575buildkernel: bk_tools bk_build_list bk_kernwarn
984263bc
MD
576.for _kernel in ${BUILDKERNELS}
577 @echo "--------------------------------------------------------------"
578 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
579 @echo "--------------------------------------------------------------"
580 @echo "===> ${_kernel}"
fc7aca3e
MD
581.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
582 rm -rf ${KRNLOBJDIR}/${_kernel}
583.else
e05c8c84 584 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
fc7aca3e 585 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
e05c8c84 586 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
fc7aca3e 587.endif
984263bc
MD
588 mkdir -p ${KRNLOBJDIR}
589.if !defined(NO_KERNELCONFIG)
590 cd ${KRNLCONFDIR}; \
1397f94a 591 PATH=${STRICTTMPPATH} \
984263bc
MD
592 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
593 ${KERNCONFDIR}/${_kernel}
9a359590
MD
594.endif
595.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
596 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
984263bc 597.endif
e05c8c84 598 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
984263bc
MD
599.if !defined(NO_KERNELDEPEND)
600 cd ${KRNLOBJDIR}/${_kernel}; \
601 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
602.endif
603 cd ${KRNLOBJDIR}/${_kernel}; \
604 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
605 @echo "--------------------------------------------------------------"
606 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
607 @echo "--------------------------------------------------------------"
608.endfor
609
fc7aca3e 610# The nativekernel target rebuilds the specified kernels from scratch
114580ac 611# using the system's standard compiler rather than using the crossbuild
fc7aca3e
MD
612# tools generated by the last buildworld. This is fairly safe if your
613# system is reasonable up-to-date.
e05c8c84 614#
fc7aca3e 615nativekernel: bk_build_list bk_kernwarn
e05c8c84
MD
616.for _kernel in ${BUILDKERNELS}
617 @echo "--------------------------------------------------------------"
618 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
619 @echo "--------------------------------------------------------------"
620 @echo "===> ${_kernel}"
fc7aca3e
MD
621.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
622 rm -rf ${KRNLOBJDIR}/${_kernel}
623.else
e05c8c84 624 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
fc7aca3e 625 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
e05c8c84 626 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
fc7aca3e 627.endif
e05c8c84
MD
628 mkdir -p ${KRNLOBJDIR}
629.if !defined(NO_KERNELCONFIG)
630 cd ${KRNLCONFDIR}; \
631 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
632 ${KERNCONFDIR}/${_kernel}
9a359590
MD
633.endif
634.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
635 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
e05c8c84
MD
636.endif
637 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
e05c8c84
MD
638 cd ${KRNLOBJDIR}/${_kernel}; \
639 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
640 ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
641.if !defined(NO_KERNELDEPEND)
642 cd ${KRNLOBJDIR}/${_kernel}; \
643 ${MAKE} KERNEL=${INSTKERNNAME} depend
644.endif
645 cd ${KRNLOBJDIR}/${_kernel}; \
646 ${MAKE} KERNEL=${INSTKERNNAME} all
647 @echo "--------------------------------------------------------------"
648 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
649 @echo "--------------------------------------------------------------"
650.endfor
651
fc7aca3e
MD
652# The quickkernel target rebuilds the specified kernels as quickly
653# as possible. It will use the native tools or the buildworld cross tools
654# based on whether the kernel was originally generated via buildkernel or
655# nativekernel. Config is rerun but the object hierarchy is not rebuilt,
656# nor is the make depend step run.
984263bc 657#
c2c83759 658quickkernel: maybe_bk_tools bk_build_list bk_kernwarn
fc7aca3e
MD
659.for _kernel in ${BUILDKERNELS}
660 @echo "--------------------------------------------------------------"
661 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
662 @echo "--------------------------------------------------------------"
663 @echo "===> ${_kernel}"
664.if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
665.if !defined(NO_KERNELCONFIG)
666 cd ${KRNLCONFDIR}; \
667 PATH=${STRICTTMPPATH} \
668 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
669 ${KERNCONFDIR}/${_kernel}
670.endif
671 cd ${KRNLOBJDIR}/${_kernel}; \
672 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
673.else
674.if !defined(NO_KERNELCONFIG)
675 cd ${KRNLCONFDIR}; \
676 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
677 ${KERNCONFDIR}/${_kernel}
678.endif
679 cd ${KRNLOBJDIR}/${_kernel}; \
680 ${MAKE} KERNEL=${INSTKERNNAME} all
681.endif
682 @echo "--------------------------------------------------------------"
683 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
684 @echo "--------------------------------------------------------------"
685.endfor
686
687
984263bc
MD
688# installkernel
689#
690# Install the kernel defined by INSTALLKERNEL
691#
692installkernel reinstallkernel:
982b0507
MD
693 @echo "--------------------------------------------------------------"
694 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
695 @echo "--------------------------------------------------------------"
696.if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
984263bc 697 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
982b0507 698 ${IMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
c2c83759
MD
699.else
700 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
701 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
702.endif
984263bc 703
984263bc
MD
704#
705# most
706#
707# Build most of the user binaries on the existing system libs and includes.
708#
709most:
710 @echo "--------------------------------------------------------------"
711 @echo ">>> Building programs only"
712 @echo "--------------------------------------------------------------"
713.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
714 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all
715.endfor
716
717#
718# installmost
719#
720# Install the binaries built by the 'most' target. This does not include
721# libraries or include files.
722#
723installmost:
724 @echo "--------------------------------------------------------------"
725 @echo ">>> Installing programs only"
726 @echo "--------------------------------------------------------------"
727.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
728 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install
729.endfor
730
731#
732# ------------------------------------------------------------------------
733#
734# From here onwards are utility targets used by the 'make world' and
735# related targets. If your 'world' breaks, you may like to try to fix
736# the problem and manually run the following targets to attempt to
737# complete the build. Beware, this is *not* guaranteed to work, you
738# need to have a pretty good grip on the current state of the system
739# to attempt to manually finish it. If in doubt, 'make world' again.
740#
741
79aa78bc
MD
742# bootstrap-tools: Build all tools required to build all tools. Note that
743# order is important in a number of cases and also note that the bootstrap
744# and build tools stages have access to earlier binaries they themselves
745# had generated.
984263bc 746#
79aa78bc
MD
747# patch: older patch's do not have -i. This program must be built
748# first so other bootstrap tools that need to apply patches
749# can use it.
17030342
MD
750# [x]install: dependancies on various new install features
751# rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
752# envs are not compatible with older objformat binaries.
753#
cecff5c1 754.if exists(${.CURDIR}/games) && !defined(NO_GAMES)
984263bc
MD
755_strfile= games/fortune/strfile
756.endif
757
758bootstrap-tools:
062db326 759 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
1397f94a 760.for _tool in ${_strfile} \
1a7434d5 761 usr.bin/patch \
e2ea6619 762 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo bin/test \
11ba1493 763 bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
b07b69cc 764 bin/hostname bin/kill \
1397f94a 765 usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \
1320c43d 766 usr.bin/m4 usr.bin/rpcgen usr.bin/make usr.bin/awk usr.bin/stat \
a96913f0 767 usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \
1397f94a
MD
768 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
769 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
770 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
b07b69cc 771 usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
e909bba2 772 usr.bin/cap_mkdb usr.bin/true usr.bin/false \
c02263c2 773 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
79ecda55 774 usr.bin/tail usr.bin/unifdef \
1397f94a 775 usr.sbin/chown usr.sbin/mtree usr.sbin/config \
ed5d5720 776 usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \
dea0b85a 777 gnu/usr.bin/texinfo gnu/usr.bin/grep gnu/usr.bin/sort \
32a7b49a 778 usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb
1397f94a 779 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
984263bc
MD
780 cd ${.CURDIR}/${_tool}; \
781 ${MAKE} DIRPRFX=${_tool}/ obj; \
782 ${MAKE} DIRPRFX=${_tool}/ depend; \
783 ${MAKE} DIRPRFX=${_tool}/ all; \
1397f94a 784 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
984263bc 785.endfor
e05c8c84 786 touch ${BTOOLSDEST}/.bootstrap_done
984263bc 787
bceb727e 788# build-tools: Build special purpose build tools.
984263bc 789#
1397f94a
MD
790# XXX we may be able to remove or consolidate this into bootstrap-tools
791# now that we have the native helper (.nx/.no) infrastructure.
792#
cecff5c1 793.if exists(${.CURDIR}/share) && !defined(NO_SHARE)
984263bc
MD
794_share= share/syscons/scrnmaps
795.endif
796
ddf7cc86
SS
797_gcc41_cross= gnu/usr.bin/cc41
798_gcc41_tools= gnu/usr.bin/cc41/cc_prep gnu/usr.bin/cc41/cc_tools
d8280c36 799.if !defined(NO_GCC44)
4f5ea479
SS
800_gcc44_cross= gnu/usr.bin/cc44
801_gcc44_tools= gnu/usr.bin/cc44/cc_prep gnu/usr.bin/cc44/cc_tools
d8280c36 802.endif
c97b9141 803_custom_cross= libexec/customcc
123dec51 804_binutils= gnu/usr.bin/${WORLD_BINUTILSVER}
17030342 805
984263bc 806build-tools:
96c51b62 807.for _tool in ${_gcc41_tools} ${_gcc44_tools} ${_libkrb5} ${_share}
1397f94a 808 ${ECHODIR} "===> ${_tool} (build-tools)"; \
984263bc
MD
809 cd ${.CURDIR}/${_tool}; \
810 ${MAKE} DIRPRFX=${_tool}/ obj; \
1397f94a
MD
811 ${MAKE} DIRPRFX=${_tool}/ depend; \
812 ${MAKE} DIRPRFX=${_tool}/ all; \
813 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
984263bc 814.endfor
e05c8c84 815 touch ${BTOOLSDEST}/.build_done
984263bc
MD
816
817#
818# cross-tools: Build cross-building tools
819#
984263bc
MD
820.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
821_btxld= usr.sbin/btxld
822.endif
823
824cross-tools:
da5b39ba 825.for _tool in ${_btxld} ${_binutils} \
97c14704 826 usr.bin/objformat \
96c51b62 827 ${_gcc41_cross} ${_gcc44_cross} ${_custom_cross}
1397f94a 828 ${ECHODIR} "===> ${_tool} (cross-tools)"; \
984263bc
MD
829 cd ${.CURDIR}/${_tool}; \
830 ${MAKE} DIRPRFX=${_tool}/ obj; \
831 ${MAKE} DIRPRFX=${_tool}/ depend; \
832 ${MAKE} DIRPRFX=${_tool}/ all; \
1397f94a 833 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
984263bc 834.endfor
e05c8c84 835 touch ${CTOOLSDEST}/.cross_done
984263bc
MD
836
837#
838# hierarchy - ensure that all the needed directories are present
839#
840hierarchy:
841 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
842
843#
844# libraries - build all libraries, and install them under ${DESTDIR}.
845#
846# The list of libraries with dependents (${_prebuild_libs}) and their
847# interdependencies (__L) are built automatically by the
848# ${.CURDIR}/tools/make_libdeps.sh script.
849#
5228fe46
MD
850# .makeenv does not work when bootstrapping from 4.x, so we must be sure
851# to specify the correct CCVER or 'cc' will not exec the correct compiler.
852#
984263bc 853libraries:
ddf7cc86
SS
854 cd ${.CURDIR}; \
855 HOST_CCVER=${HOST_CCVER} CCVER=gcc41 \
856 ${MAKE} -f Makefile.inc1 _startup_libs41;
d8280c36 857.if !defined(NO_GCC44)
4f5ea479
SS
858 cd ${.CURDIR}; \
859 HOST_CCVER=${HOST_CCVER} CCVER=gcc44 \
860 ${MAKE} -f Makefile.inc1 _startup_libs44;
d8280c36 861.endif
29d48e65 862 cd ${.CURDIR}; \
984263bc
MD
863 ${MAKE} -f Makefile.inc1 _startup_libs; \
864 ${MAKE} -f Makefile.inc1 _prebuild_libs; \
865 ${MAKE} -f Makefile.inc1 _generic_libs;
e05c8c84 866 touch ${WORLDDEST}/.libraries_done
984263bc
MD
867
868# These dependencies are not automatically generated:
869#
fd8b66cd 870# gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
4f5ea479
SS
871# shared libraries for ELF. The target for _startup_libsXX is
872# specifically built using gccXX.
984263bc 873#
fd8b66cd 874_startup_libs41= gnu/lib/gcc41/csu gnu/lib/gcc41/libgcc
4f5ea479 875_startup_libs44= gnu/lib/gcc44/csu gnu/lib/gcc44/libgcc
e1da6819 876_startup_libs= lib/csu lib/libc lib/libc_rtld
984263bc 877
50ef37d2 878_prebuild_libs= lib/libbz2 lib/libz
0b153c05 879_prebuild_libs+= lib/libutil
984263bc
MD
880
881_generic_libs= gnu/lib
882
984263bc 883_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
7d1ab061 884 lib/libncurses/libncurses lib/libopie lib/libradius \
48d67717 885 lib/libsbuf lib/libtacplus lib/libm \
9f95f3e0 886 lib/libpam lib/libypclnt lib/lib${THREAD_LIB} \
3d91d947 887 lib/libpthread lib/libprop lib/libdevattr
984263bc
MD
888
889lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
984263bc
MD
890
891_generic_libs+= lib
892
cecff5c1 893.if !defined(NO_CRYPT)
984263bc
MD
894.if !defined(NO_OPENSSL)
895_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl
896.if !defined(NO_OPENSSH)
897_prebuild_libs+= secure/lib/libssh
898secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
899.endif
900.endif
901_generic_libs+= secure/lib
902.endif
903
904_generic_libs+= usr.bin/lex/lib
905
96c51b62 906.for _lib in ${_startup_libs41} ${_startup_libs44} \
4db2a28c 907 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
984263bc
MD
908${_lib}__L: .PHONY
909.if exists(${.CURDIR}/${_lib})
910 ${ECHODIR} "===> ${_lib}"; \
911 cd ${.CURDIR}/${_lib}; \
912 ${MAKE} DIRPRFX=${_lib}/ depend; \
913 ${MAKE} DIRPRFX=${_lib}/ all; \
914 ${MAKE} DIRPRFX=${_lib}/ install
915.endif
916.endfor
917
918_startup_libs: ${_startup_libs:S/$/__L/}
ddf7cc86 919_startup_libs41: ${_startup_libs41:S/$/__L/}
4f5ea479 920_startup_libs44: ${_startup_libs44:S/$/__L/}
984263bc
MD
921_prebuild_libs: ${_prebuild_libs:S/$/__L/}
922_generic_libs: ${_generic_libs:S/$/__L/}
923
1397f94a
MD
924# library targets must be ordered because there are inter-library
925# races (e.g. generation of tconfig.h)
926#
ddf7cc86 927.ORDER: ${_startup_libs41:S/$/__L/}
4f5ea479 928.ORDER: ${_startup_libs44:S/$/__L/}
1397f94a
MD
929.ORDER: ${_startup_libs:S/$/__L/}
930.ORDER: ${_prebuild_libs:S/$/__L/}
931.ORDER: ${_generic_libs:S/$/__L/}
932
933.for __target in clean cleandepend cleandir obj depend includes
984263bc
MD
934.for entry in ${SUBDIR}
935${entry}.${__target}__D: .PHONY
936 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
937 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
938 edir=${entry}.${MACHINE_ARCH}; \
939 cd ${.CURDIR}/$${edir}; \
940 else \
941 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
942 edir=${entry}; \
943 cd ${.CURDIR}/$${edir}; \
944 fi; \
945 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
946.endfor
947par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
1397f94a 948.ORDER: ${SUBDIR:S/$/.${__target}__D/}
984263bc 949.endfor
1397f94a 950.ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
984263bc 951
cb0f1574
MD
952# The wmake target is used by /usr/bin/wmake to run make in a
953# world build environment.
954#
955wmake:
1397f94a 956 @echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}'
cb0f1574 957
5c7da0d7
MD
958wmakeenv:
959 @echo '${WMAKEENV} /bin/sh'
960
1397f94a
MD
961bmake:
962 @echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}'
963
17030342
MD
964bmakeenv:
965 @echo '${BMAKEENV} /bin/sh'
966
1397f94a
MD
967tmake:
968 @echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}'
969
17030342
MD
970tmakeenv:
971 @echo '${TMAKEENV} /bin/sh'
972
66834c05
SS
973xmake:
974 @echo '${XMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${XMAKE_ARGS}'
975
976xmakeenv:
977 @echo '${XMAKEENV} /bin/sh'
978
984263bc 979.include <bsd.subdir.mk>
cb0f1574 980