2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
3 # $DragonFly: src/Makefile.inc1,v 1.118 2008/06/24 20:22:30 thomas Exp $
5 # Build-time options are documented in make.conf(5).
7 # The intended user-driven targets are:
9 # buildworld - rebuild *everything*, including glue to help do upgrades
10 # quickworld - skip the glue and do a depend+build on the meat
11 # realquickworld - skip the glue and depend stages and just build the meat
12 # crossworld - only build the glue (particularly the cross-build environment)
13 # installworld- install everything built by "buildworld"
14 # most - build user commands, no libraries or include files
15 # installmost - install user commands, no libraries or include files
17 # Standard targets (not defined here) are documented in the makefiles in
18 # /usr/share/mk. These include:
19 # obj depend all install clean cleandepend cleanobj
21 # Put initial settings here.
24 # We must do share/info early so that installation of info `dir'
25 # entries works correctly. Do it first since it is less likely to
26 # grow dependencies on include and lib than vice versa.
27 .if exists(${.CURDIR}/share/info)
31 # We must do include and lib early so that the perl *.ph generation
32 # works correctly as it uses the header files installed by this.
33 .if exists(${.CURDIR}/include)
36 .if exists(${.CURDIR}/lib)
39 # This exists simply to ensure that the obj dir hierarchy is
40 # intact for nrelease, allowing the nrelease Makefile's to
41 # reference ${.OBJDIR}.
43 .if exists(${.CURDIR}/nrelease)
47 .if exists(${.CURDIR}/bin)
50 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
53 .if exists(${.CURDIR}/gnu)
56 .if exists(${.CURDIR}/libexec)
59 .if exists(${.CURDIR}/sbin)
62 .if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
65 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
68 .if exists(${.CURDIR}/sys)
71 .if exists(${.CURDIR}/usr.bin)
74 .if exists(${.CURDIR}/usr.sbin)
78 .if exists(${.CURDIR}/etc)
82 # These are last, since it is nice to at least get the base system
83 # rebuilt before you do them.
84 .if defined(LOCAL_DIRS)
85 .for _DIR in ${LOCAL_DIRS}
86 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
92 .if defined(SUBDIR_OVERRIDE)
93 SUBDIR= ${SUBDIR_OVERRIDE}
96 .if defined(NOCLEANDIR)
97 CLEANDIR= clean cleandepend
102 .if defined(NO_CLEAN)
106 # Object directory base in primary make. Note that when we rerun make
107 # from inside this file we change MAKEOBJDIRPREFIX to the appropriate
108 # subdirectory because the rest of the build system needs it that way.
109 # The original object directory base is saved in OBJTREE.
111 MAKEOBJDIRPREFIX?= /usr/obj
112 OBJTREE?= ${MAKEOBJDIRPREFIX}
114 # Used for stage installs and pathing
116 DESTDIRBASE?= ${OBJTREE}${.CURDIR}
118 # Remove DESTDIR from MAKEFLAGS. It is present in the environment
119 # anyhow, and we need to be able to override it for stage installs
120 .MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*}
122 # This sets the compiler we use to build the world/kernel with
125 TARGET_ARCH?= ${MACHINE_ARCH}
126 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
129 TARGET?= ${TARGET_ARCH}
132 BUILD_ARCH!= sysctl -n hw.machine_arch
133 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
134 .error To cross-build, set TARGET_ARCH.
138 # Backwards compatibility with older make's or older sys.mk's. make
139 # is expected to define MACHINE_PLATFORM.
141 .if !defined(MACHINE_PLATFORM)
142 MACHINE_PLATFORM= pc32
145 # XXX this is ugly and we need to come up with a nicer solution
146 .if !defined(TARGET_PLATFORM)
147 .if ${TARGET_ARCH} == "i386"
148 TARGET_PLATFORM= pc32
149 .elif ${TARGET_ARCH} == "amd64"
150 TARGET_PLATFORM= pc64
152 .error Unknown target architecture.
156 THREAD_LIB?= thread_xu
157 .if ${THREAD_LIB} == "c_r"
158 .if defined(NO_LIBC_R)
159 .error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
163 # BTOOLS (Natively built) All non-cross-development tools that the
164 # main build needs. This includes things like 'mkdir' and 'rm'.
165 # We will not use the native system's exec path once we start
166 # on WORLD. (bootstrap-tools and build-tools or BTOOLS)
168 # CTOOLS (Natively built) Cross development tools which are specific
169 # to the target architecture.
171 # WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and
174 # MACHINE_PLATFORM Platform Architecture we are building on
175 # MACHINE Machine Architecture (usually the same as MACHINE_ARCH)
176 # MACHINE_ARCH Cpu Architecture we are building on
178 # TARGET_PLATFORM Platform Architecture we are building for
179 # TARGET Machine Architecture we are building for
180 # TARGET_ARCH Cpu Architecture we are building for
182 BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH}
183 CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
184 WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH}
186 # The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
187 # cross-tools stages to augment the existing command path to access newer
188 # versions of certain utilities such as 'patch' that the cross-tools stage
191 BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
193 # The strict temporary command path contains all binaries required
194 # by the buildworld system after the cross-tools stage.
196 STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
202 # Building a world goes through the following stages
204 # 1. bootstrap-tool stage [BMAKE]
205 # This stage is responsible for creating programs that
206 # are needed for backward compatibility reasons. They
207 # are not built as cross-tools.
208 # 2. build-tool stage [TMAKE]
209 # This stage is responsible for creating the object
210 # tree and building any tools that are needed during
212 # 3. cross-tool stage [XMAKE]
213 # This stage is responsible for creating any tools that
214 # are needed for cross-builds. A cross-compiler is one
216 # 4. world stage [WMAKE]
217 # This stage actually builds the world.
218 # 5. install stage (optional) [IMAKE]
219 # This stage installs a previously built world.
222 # bootstrap-tool stage
224 BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
226 DESTDIR=${BTOOLSDEST} \
227 PATH=${BTOOLSPATH}:${PATH} \
228 INSTALL="sh ${.CURDIR}/tools/install.sh"
230 BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
231 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
236 TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
239 PATH=${BTOOLSPATH}:${PATH} \
240 INSTALL="sh ${.CURDIR}/tools/install.sh"
242 TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
243 -DNO_FORTRAN -DNOSHARED
247 # note: TOOLS_PREFIX points to the obj root holding the cross
248 # compiler binaries, while USRDATA_PREFIX points to the obj root
249 # holding the target environment (and also determines where cross-built
250 # libraries, crt*.o, and include files are installed).
252 XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \
254 DESTDIR=${CTOOLSDEST} \
255 INSTALL="sh ${.CURDIR}/tools/install.sh" \
256 TOOLS_PREFIX=${CTOOLSDEST} \
257 USRDATA_PREFIX=${WORLDDEST} \
258 PATH=${BTOOLSPATH}:${PATH}
260 XMAKE= ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
261 -DBOOTSTRAPPING -DNOSHARED
263 # world stage, note the strict path and note that TOOLS_PREFIX is left
264 # unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
265 # which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
266 # for both binary and library paths, even though it is being compiled to
267 # WORLDDEST. None of the programs in the world stage are ever actually
268 # executed during the buildworld/installworld.
270 CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \
272 MACHINE_ARCH=${TARGET_ARCH} \
274 MACHINE_PLATFORM=${TARGET_PLATFORM} \
275 OBJFORMAT_PATH=${CTOOLSDEST} \
276 HOST_CCVER=${HOST_CCVER} \
279 WMAKEENV= ${CROSSENV} \
280 DESTDIR=${WORLDDEST} \
281 INSTALL="sh ${.CURDIR}/tools/install.sh" \
282 PATH=${STRICTTMPPATH}
284 WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1
288 IMAKEENV= ${CROSSENV} \
289 PATH=${STRICTTMPPATH}
290 IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1
294 KMAKEENV= ${WMAKEENV}
298 # Attempt to rebuild the entire system, with reasonable chance of
299 # success, regardless of how old your existing system is.
303 @echo "--------------------------------------------------------------"
304 @echo ">>> Rebuilding the temporary build tree"
305 @echo "--------------------------------------------------------------"
306 .if !defined(NOCLEAN)
307 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
309 # XXX - These two can depend on any header file.
310 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
311 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
313 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
314 .for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
315 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \
316 -p ${_dir}/ > /dev/null
317 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
318 -p ${_dir}/usr > /dev/null
320 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
321 -p ${WORLDDEST}/usr/include > /dev/null
322 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
326 @echo "--------------------------------------------------------------"
327 @echo ">>> stage 1: bootstrap tools"
328 @echo "--------------------------------------------------------------"
329 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
332 @echo "--------------------------------------------------------------"
333 @echo ">>> stage 2a: cleaning up the object tree"
334 @echo "--------------------------------------------------------------"
335 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
338 @echo "--------------------------------------------------------------"
339 @echo ">>> stage 2b: rebuilding the object tree"
340 @echo "--------------------------------------------------------------"
341 cd ${.CURDIR}; ${WMAKE} par-obj
344 @echo "--------------------------------------------------------------"
345 @echo ">>> stage 2c: build tools"
346 @echo "--------------------------------------------------------------"
347 cd ${.CURDIR}; ${TMAKE} build-tools
350 @echo "--------------------------------------------------------------"
351 @echo ">>> stage 3: cross tools"
352 @echo "--------------------------------------------------------------"
353 cd ${.CURDIR}; ${XMAKE} cross-tools
356 @echo "--------------------------------------------------------------"
357 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
358 @echo "--------------------------------------------------------------"
359 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
362 @echo "--------------------------------------------------------------"
363 @echo ">>> stage 4b: building libraries"
364 @echo "--------------------------------------------------------------"
365 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
368 @echo "--------------------------------------------------------------"
369 @echo ">>> stage 4c: make dependencies"
370 @echo "--------------------------------------------------------------"
371 cd ${.CURDIR}; ${WMAKE} par-depend
374 @echo "--------------------------------------------------------------"
375 @echo ">>> stage 4d: building everything.."
376 @echo "--------------------------------------------------------------"
377 cd ${.CURDIR}; ${WMAKE} all
379 # note: buildworld no longer depends on _cleanobj because we rm -rf the
380 # entire object tree and built the bootstrap tools in a different location.
382 # buildworld - build everything from scratch
383 # quickworld - skip the bootstrap, build, and cross-build steps
384 # realquickworld - skip the bootstrap, build, crossbuild, and depend step.
386 # note: we include _obj in realquickworld to prevent accidental creation
387 # of files in /usr/src.
390 .if !defined(SUBDIR_OVERRIDE)
391 WMAKE_TGTS+= _worldtmp _bootstrap-tools
393 WMAKE_TGTS+= _obj _build-tools
394 .if !defined(SUBDIR_OVERRIDE)
395 WMAKE_TGTS+= _cross-tools
397 WMAKE_TGTS+= _includes _libraries _depend everything
399 buildworld: ${WMAKE_TGTS}
401 quickworld: _obj _includes _libraries _depend everything
403 realquickworld: _obj _includes _libraries everything
405 crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
407 .ORDER: ${WMAKE_TGTS}
408 .ORDER: _obj _includes
413 # Checks to be sure system is ready for installworld
416 .if !defined(NO_SENDMAIL)
417 @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
418 @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
420 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
421 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; exit 1)
422 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
423 .if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
424 @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; exit 1;; esac
429 # Installs everything compiled by a 'buildworld'.
431 installworld: installcheck
432 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
433 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/
438 # If you have a build server, you can NFS mount the source and obj directories
439 # and do a 'make reinstall' on the *client* to install new binaries from the
440 # most recent server build.
443 @echo "--------------------------------------------------------------"
444 @echo ">>> Making hierarchy"
445 @echo "--------------------------------------------------------------"
446 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
448 @echo "--------------------------------------------------------------"
449 @echo ">>> Installing everything.."
450 @echo "--------------------------------------------------------------"
451 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
452 .if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
454 @echo "--------------------------------------------------------------"
455 @echo ">>> Rebuilding man page indices"
456 @echo "--------------------------------------------------------------"
457 cd ${.CURDIR}/share/man; ${MAKE} makedb
461 # buildkernel, nativekernel, quickkernel, and installkernel
463 # Which kernels to build and/or install is specified by setting
464 # KERNCONF. If not defined a GENERIC kernel is built/installed.
465 # Only the existing (depending TARGET) config files are used
466 # for building kernels and only the first of these is designated
467 # as the one being installed.
469 # You can specify INSTALLSTRIPPED=1 if you wish the installed
470 # kernel and modules to be stripped of its debug info (required
471 # symbols are left intact). You can specify INSTALLSTRIPPEDMODULES
472 # if you only want to strip the modules of their debug info. These
473 # only apply if you have DEBUG=-g in your kernel config or make line.
475 # Note that we have to use TARGET instead of TARGET_ARCH when
476 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
477 # be set to cross-build, we have to make sure TARGET is set
480 .if !defined(KERNCONF) && defined(KERNEL)
486 INSTKERNNAME?= kernel
488 KRNLSRCDIR= ${.CURDIR}/sys
489 KRNLCONFDIR= ${KRNLSRCDIR}/config
490 KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
491 KERNCONFDIR?= ${KRNLCONFDIR}
495 .for _kernel in ${KERNCONF}
496 .if exists(${KERNCONFDIR}/${_kernel})
497 BUILDKERNELS+= ${_kernel}
498 .if empty(INSTALLKERNEL)
499 INSTALLKERNEL= ${_kernel}
504 # kernel version numbers survive rm -rf
506 .for _kernel in ${BUILDKERNELS}
507 .if exists(${KRNLOBJDIR}/${_kernel}/version)
508 KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
515 # Builds all kernels defined by BUILDKERNELS.
518 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
519 echo "You must buildworld before buildkernel. If you wish"; \
520 echo "to build a kernel using native tools, config it manually"; \
521 echo "or use the nativekernel target if you are in a rush"; \
526 .for _kernel in ${BUILDKERNELS}
527 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
528 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
529 echo "The kernel was build using buildworld tools which no" ; \
530 echo "longer appear to exist, quickkernel failed!" ; \
537 .if empty(BUILDKERNELS)
538 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
539 @echo ">>> Did you move your kernel configs from i386/conf to config/?"
544 .if defined(KERNWARN)
545 @echo "--------------------------------------------------------------"
546 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
547 @echo "--------------------------------------------------------------"
552 # The buildkernel target rebuilds the specified kernels from scratch
553 # using the crossbuild tools generated by the last buildworld. It is
554 # the safest (but also the most time consuming) way to build a new kernel.
556 buildkernel: bk_tools bk_build_list bk_kernwarn
557 .for _kernel in ${BUILDKERNELS}
558 @echo "--------------------------------------------------------------"
559 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
560 @echo "--------------------------------------------------------------"
561 @echo "===> ${_kernel}"
562 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
563 rm -rf ${KRNLOBJDIR}/${_kernel}
565 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
566 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
567 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
569 mkdir -p ${KRNLOBJDIR}
570 .if !defined(NO_KERNELCONFIG)
572 PATH=${STRICTTMPPATH} \
573 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
574 ${KERNCONFDIR}/${_kernel}
576 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
577 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
579 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
580 .if !defined(NO_KERNELDEPEND)
581 cd ${KRNLOBJDIR}/${_kernel}; \
582 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
584 cd ${KRNLOBJDIR}/${_kernel}; \
585 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
586 @echo "--------------------------------------------------------------"
587 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
588 @echo "--------------------------------------------------------------"
591 # The nativekernel target rebuilds the specified kernels from scratch
592 # using the system's standard compiler rather than using the crossbuild
593 # tools generated by the last buildworld. This is fairly safe if your
594 # system is reasonable up-to-date.
596 nativekernel: bk_build_list bk_kernwarn
597 .for _kernel in ${BUILDKERNELS}
598 @echo "--------------------------------------------------------------"
599 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
600 @echo "--------------------------------------------------------------"
601 @echo "===> ${_kernel}"
602 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
603 rm -rf ${KRNLOBJDIR}/${_kernel}
605 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
606 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
607 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
609 mkdir -p ${KRNLOBJDIR}
610 .if !defined(NO_KERNELCONFIG)
612 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
613 ${KERNCONFDIR}/${_kernel}
615 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
616 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
618 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
619 cd ${KRNLOBJDIR}/${_kernel}; \
620 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
621 ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
622 .if !defined(NO_KERNELDEPEND)
623 cd ${KRNLOBJDIR}/${_kernel}; \
624 ${MAKE} KERNEL=${INSTKERNNAME} depend
626 cd ${KRNLOBJDIR}/${_kernel}; \
627 ${MAKE} KERNEL=${INSTKERNNAME} all
628 @echo "--------------------------------------------------------------"
629 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
630 @echo "--------------------------------------------------------------"
633 # The quickkernel target rebuilds the specified kernels as quickly
634 # as possible. It will use the native tools or the buildworld cross tools
635 # based on whether the kernel was originally generated via buildkernel or
636 # nativekernel. Config is rerun but the object hierarchy is not rebuilt,
637 # nor is the make depend step run.
639 quickkernel: maybe_bk_tools bk_build_list bk_kernwarn
640 .for _kernel in ${BUILDKERNELS}
641 @echo "--------------------------------------------------------------"
642 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
643 @echo "--------------------------------------------------------------"
644 @echo "===> ${_kernel}"
645 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
646 .if !defined(NO_KERNELCONFIG)
648 PATH=${STRICTTMPPATH} \
649 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
650 ${KERNCONFDIR}/${_kernel}
652 cd ${KRNLOBJDIR}/${_kernel}; \
653 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
655 .if !defined(NO_KERNELCONFIG)
657 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
658 ${KERNCONFDIR}/${_kernel}
660 cd ${KRNLOBJDIR}/${_kernel}; \
661 ${MAKE} KERNEL=${INSTKERNNAME} all
663 @echo "--------------------------------------------------------------"
664 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
665 @echo "--------------------------------------------------------------"
671 # Install the kernel defined by INSTALLKERNEL
673 installkernel reinstallkernel:
674 @echo "--------------------------------------------------------------"
675 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
676 @echo "--------------------------------------------------------------"
677 .if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
678 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
679 ${IMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
681 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
682 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
688 # Build most of the user binaries on the existing system libs and includes.
691 @echo "--------------------------------------------------------------"
692 @echo ">>> Building programs only"
693 @echo "--------------------------------------------------------------"
694 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
695 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all
701 # Install the binaries built by the 'most' target. This does not include
702 # libraries or include files.
705 @echo "--------------------------------------------------------------"
706 @echo ">>> Installing programs only"
707 @echo "--------------------------------------------------------------"
708 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
709 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install
713 # ------------------------------------------------------------------------
715 # From here onwards are utility targets used by the 'make world' and
716 # related targets. If your 'world' breaks, you may like to try to fix
717 # the problem and manually run the following targets to attempt to
718 # complete the build. Beware, this is *not* guaranteed to work, you
719 # need to have a pretty good grip on the current state of the system
720 # to attempt to manually finish it. If in doubt, 'make world' again.
723 # bootstrap-tools: Build all tools required to build all tools. Note that
724 # order is important in a number of cases and also note that the bootstrap
725 # and build tools stages have access to earlier binaries they themselves
728 # patch: older patch's do not have -i. This program must be built
729 # first so other bootstrap tools that need to apply patches
731 # [x]install: dependancies on various new install features
732 # rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
733 # envs are not compatible with older objformat binaries.
735 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
736 _strfile= games/fortune/strfile
740 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
741 .for _tool in ${_strfile} \
743 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo bin/test \
744 bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
745 bin/hostname bin/kill \
746 usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \
747 usr.bin/m4 usr.bin/rpcgen usr.bin/make usr.bin/awk usr.bin/stat \
748 usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \
749 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
750 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
751 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
752 usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
753 usr.bin/cap_mkdb usr.bin/true usr.bin/false \
754 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
756 usr.sbin/chown usr.sbin/mtree usr.sbin/config \
757 usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \
758 gnu/usr.bin/texinfo gnu/usr.bin/grep gnu/usr.bin/sort \
759 usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb
760 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
761 cd ${.CURDIR}/${_tool}; \
762 ${MAKE} DIRPRFX=${_tool}/ obj; \
763 ${MAKE} DIRPRFX=${_tool}/ depend; \
764 ${MAKE} DIRPRFX=${_tool}/ all; \
765 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
767 touch ${BTOOLSDEST}/.bootstrap_done
769 # build-tools: Build special purpose build tools.
771 # XXX we may be able to remove or consolidate this into bootstrap-tools
772 # now that we have the native helper (.nx/.no) infrastructure.
774 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
775 _share= share/syscons/scrnmaps
778 _gcc41_cross= gnu/usr.bin/cc41
779 _gcc41_tools= gnu/usr.bin/cc41/cc_prep gnu/usr.bin/cc41/cc_tools
780 .if !defined(NO_GCC44)
781 _gcc44_cross= gnu/usr.bin/cc44
782 _gcc44_tools= gnu/usr.bin/cc44/cc_prep gnu/usr.bin/cc44/cc_tools
784 _custom_cross= libexec/customcc
785 _binutils= gnu/usr.bin/binutils217
788 .for _tool in ${_gcc41_tools} ${_gcc44_tools} ${_libkrb5} ${_share}
789 ${ECHODIR} "===> ${_tool} (build-tools)"; \
790 cd ${.CURDIR}/${_tool}; \
791 ${MAKE} DIRPRFX=${_tool}/ obj; \
792 ${MAKE} DIRPRFX=${_tool}/ depend; \
793 ${MAKE} DIRPRFX=${_tool}/ all; \
794 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
796 touch ${BTOOLSDEST}/.build_done
799 # cross-tools: Build cross-building tools
801 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
802 _btxld= usr.sbin/btxld
806 .for _tool in ${_btxld} ${_binutils} \
808 ${_gcc41_cross} ${_gcc44_cross} ${_custom_cross}
809 ${ECHODIR} "===> ${_tool} (cross-tools)"; \
810 cd ${.CURDIR}/${_tool}; \
811 ${MAKE} DIRPRFX=${_tool}/ obj; \
812 ${MAKE} DIRPRFX=${_tool}/ depend; \
813 ${MAKE} DIRPRFX=${_tool}/ all; \
814 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
816 touch ${CTOOLSDEST}/.cross_done
819 # hierarchy - ensure that all the needed directories are present
822 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
825 # libraries - build all libraries, and install them under ${DESTDIR}.
827 # The list of libraries with dependents (${_prebuild_libs}) and their
828 # interdependencies (__L) are built automatically by the
829 # ${.CURDIR}/tools/make_libdeps.sh script.
831 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
832 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
836 HOST_CCVER=${HOST_CCVER} CCVER=gcc41 \
837 ${MAKE} -f Makefile.inc1 _startup_libs41;
838 .if !defined(NO_GCC44)
840 HOST_CCVER=${HOST_CCVER} CCVER=gcc44 \
841 ${MAKE} -f Makefile.inc1 _startup_libs44;
844 ${MAKE} -f Makefile.inc1 _startup_libs; \
845 ${MAKE} -f Makefile.inc1 _prebuild_libs; \
846 ${MAKE} -f Makefile.inc1 _generic_libs;
847 touch ${WORLDDEST}/.libraries_done
849 # These dependencies are not automatically generated:
851 # gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
852 # shared libraries for ELF. The target for _startup_libsXX is
853 # specifically built using gccXX.
855 _startup_libs41= gnu/lib/gcc41/csu gnu/lib/gcc41/libgcc
856 _startup_libs44= gnu/lib/gcc44/csu gnu/lib/gcc44/libgcc
857 _startup_libs= lib/csu lib/libc lib/libc_rtld
859 _prebuild_libs= lib/libbz2 lib/libz
860 _prebuild_libs+= lib/libutil
862 _generic_libs= gnu/lib
864 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
865 lib/libncurses/libncurses lib/libopie lib/libradius \
866 lib/libsbuf lib/libtacplus lib/libm \
867 lib/libpam lib/libypclnt lib/lib${THREAD_LIB}
869 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
873 .if !defined(NO_CRYPT)
874 .if !defined(NO_OPENSSL)
875 _prebuild_libs+= secure/lib/libcrypto secure/lib/libssl
876 .if !defined(NO_OPENSSH)
877 _prebuild_libs+= secure/lib/libssh
878 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
881 _generic_libs+= secure/lib
884 _generic_libs+= usr.bin/lex/lib
886 .for _lib in ${_startup_libs41} ${_startup_libs44} \
887 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
889 .if exists(${.CURDIR}/${_lib})
890 ${ECHODIR} "===> ${_lib}"; \
891 cd ${.CURDIR}/${_lib}; \
892 ${MAKE} DIRPRFX=${_lib}/ depend; \
893 ${MAKE} DIRPRFX=${_lib}/ all; \
894 ${MAKE} DIRPRFX=${_lib}/ install
898 _startup_libs: ${_startup_libs:S/$/__L/}
899 _startup_libs41: ${_startup_libs41:S/$/__L/}
900 _startup_libs44: ${_startup_libs44:S/$/__L/}
901 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
902 _generic_libs: ${_generic_libs:S/$/__L/}
904 # library targets must be ordered because there are inter-library
905 # races (e.g. generation of tconfig.h)
907 .ORDER: ${_startup_libs41:S/$/__L/}
908 .ORDER: ${_startup_libs44:S/$/__L/}
909 .ORDER: ${_startup_libs:S/$/__L/}
910 .ORDER: ${_prebuild_libs:S/$/__L/}
911 .ORDER: ${_generic_libs:S/$/__L/}
913 .for __target in clean cleandepend cleandir obj depend includes
914 .for entry in ${SUBDIR}
915 ${entry}.${__target}__D: .PHONY
916 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
917 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
918 edir=${entry}.${MACHINE_ARCH}; \
919 cd ${.CURDIR}/$${edir}; \
921 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
923 cd ${.CURDIR}/$${edir}; \
925 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
927 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
928 .ORDER: ${SUBDIR:S/$/.${__target}__D/}
930 .ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
932 # The wmake target is used by /usr/bin/wmake to run make in a
933 # world build environment.
936 @echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}'
939 @echo '${WMAKEENV} /bin/sh'
942 @echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}'
945 @echo '${BMAKEENV} /bin/sh'
948 @echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}'
951 @echo '${TMAKEENV} /bin/sh'
954 @echo '${XMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${XMAKE_ARGS}'
957 @echo '${XMAKEENV} /bin/sh'
959 .include <bsd.subdir.mk>