1 /* asc.c - device driver for hand scanners
3 * Current version supports:
5 * - AmiScan (Mustek) Color and BW hand scanners (GI1904 chipset)
7 * Copyright (c) 1995 Gunther Schadow. All rights reserved.
8 * Copyright (c) 1995,1996,1997 Luigi Rizzo. All rights reserved.
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 * 3. All advertising materials mentioning features or use of this software
19 * must display the following acknowledgement:
20 * This product includes software developed by Gunther Schadow
22 * 4. The name of the author may not be used to endorse or promote products
23 * derived from this software without specific prior written permission.
25 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
26 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
27 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
28 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
29 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
30 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
31 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
32 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
33 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
34 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
37 * $FreeBSD: src/sys/i386/isa/asc.c,v 1.42.2.2 2001/03/01 03:22:39 jlemon Exp $
38 * $DragonFly: src/sys/i386/isa/Attic/asc.c,v 1.6 2003/08/07 21:17:23 dillon Exp $
42 #include <sys/param.h>
43 #include <sys/systm.h>
47 #include <sys/malloc.h>
48 #include <sys/kernel.h>
50 #include <sys/select.h>
53 #include <machine/asc_ioctl.h>
55 #include <bus/isa/i386/isa.h>
56 #include <bus/isa/i386/isa_device.h>
60 *** CONSTANTS & DEFINES
65 #define PROBE_SUCCESS IO_ASCSIZE
67 #define ATTACH_SUCCESS 1
72 #define DMA1_READY 0x08
75 # define lprintf if(scu->flags & FLAG_DEBUG) printf
77 # define lprintf (void)
80 #define TIMEOUT (hz*15) /* timeout while reading a buffer - default value */
83 *** LAYOUT OF THE MINOR NUMBER
86 #define UNIT_MASK 0xc0 /* unit asc0 .. asc3 */
87 #define UNIT(x) (x >> 6)
88 #define DBUG_MASK 0x20
89 #define FRMT_MASK 0x18 /* output format */
90 #define FRMT_RAW 0x00 /* output bits as read from scanner */
91 #define FRMT_GRAY 0x1 /* output gray mode for color scanner */
92 #define FRMT_PBM 0x08 /* output pbm format */
96 *** THE GEMOMETRY TABLE
99 #define GREY_LINE 826 /* 825, or 826 , or 550 ??? */
100 static const struct asc_geom {
101 int dpi; /* dots per inch */
102 int dpl; /* dots per line */
103 int bpl; /* bytes per line */
104 int g_res; /* get resolution value (ASC_STAT) */
106 { 800, 3312, 414, ASC_RES_800},
107 { 700, 2896, 362, ASC_RES_700},
108 { 600, 2480, 310, ASC_RES_600},
109 { 500, 1656, 258, ASC_RES_500},
110 { 400, 1656, 207, ASC_RES_400},
111 { 300, 1240, 155, ASC_RES_300},
112 { 200, 832, 104, ASC_RES_200},
113 { 100, 416, 52, ASC_RES_100},
114 { 200, 3*GREY_LINE, 3*GREY_LINE, 0 /* returned by color scanner */},
115 { 200, GREY_LINE, GREY_LINE, 0 /* color scanner, grey mode */},
116 { INVALID, 416, 52, INVALID } /* terminator */
120 *** THE TABLE OF UNITS
126 size_t wptr; /* only changed in ascintr */
132 long thedev; /* XXX */
133 int base; /* base address */
134 int dma_num; /* dma number */
135 char dma_byte; /* mask of byte for setting DMA value */
136 char int_byte; /* mask of byte for setting int value */
137 char cfg_byte; /* mirror of byte written to config reg (ASC_CFG). */
138 char cmd_byte; /* mirror of byte written to cmd port (ASC_CMD)*/
141 #define ATTACHED 0x01
144 #define DMA_ACTIVE 0x08
145 #define SLEEPING 0x10
146 #define SEL_COLL 0x20
147 #define PBM_MODE 0x40
148 #define FLAG_DEBUG 0x80
149 int geometry; /* resolution as geomtab index */
150 int linesize; /* length of one scan line (from geom.table) */
151 int blen; /* length of buffer in lines */
152 int btime; /* timeout of buffer in seconds/hz */
154 long icnt; /* interrupt count XXX for debugging */
156 int height; /* height, for pnm modes */
157 size_t bcount; /* bytes to read, for pnm modes */
160 static struct asc_unit unittab[NASC];
162 /*** I could not find a reasonable buffer size limit other than by
163 *** experiments. MAXPHYS is obviously too much, while DEV_BSIZE and
164 *** PAGE_SIZE are really too small. There must be something wrong
165 *** with isa_dmastart/isa_dmarangecheck HELP!!!
167 *** Note, must be DEFAULT_BLEN * samples_per_line <= MAX_BUFSIZE
169 #define MAX_BUFSIZE 0xb000 /* XXX was 0x3000 */
170 #define DEFAULT_BLEN 16
173 *** THE PER-DRIVER RECORD FOR ISA.C
175 static int ascprobe (struct isa_device *isdp);
176 static int ascattach(struct isa_device *isdp);
177 struct isa_driver ascdriver = { ascprobe, ascattach, "asc" };
179 static ointhand2_t ascintr;
181 static d_open_t ascopen;
182 static d_close_t ascclose;
183 static d_read_t ascread;
184 static d_ioctl_t ascioctl;
185 static d_poll_t ascpoll;
187 #define CDEV_MAJOR 71
189 static struct cdevsw asc_cdevsw = {
191 /* maj */ CDEV_MAJOR,
197 /* close */ ascclose,
200 /* ioctl */ ascioctl,
203 /* strategy */ nostrategy,
208 #define STATIC static
211 *** LOCALLY USED SUBROUTINES
217 *** read resolution from the scanner
220 get_resolution(struct asc_unit *scu)
225 scu->cmd_byte = ASC_STANDBY;
226 outb(ASC_CMD, scu->cmd_byte);
227 tsleep((caddr_t)scu, PCATCH, "ascres", hz/10);
228 for(delay= 100; (res=inb(ASC_STAT)) & ASC_RDY_FLAG; delay--)
230 i = tsleep((caddr_t)scu, PCATCH, "ascres0", 1);
231 if ( ( i == 0 ) || ( i == EWOULDBLOCK ) )
237 lprintf("asc.get_resolution: timeout completing command\n");
240 /* ... actual read resolution... */
242 for (i=0; geomtab[i].dpi != INVALID; i++) {
243 if (geomtab[i].g_res == res) break;
245 if (geomtab[i].dpi==INVALID) {
246 scu->geometry= i; /* INVALID; */
247 lprintf("asc.get_resolution: wrong resolution\n");
249 lprintf("asc.get_resolution: %d dpi\n",geomtab[i].dpi);
252 scu->portf_byte=0; /* default */
253 if (geomtab[scu->geometry].g_res==0 && !(scu->thedev&FRMT_GRAY)) {
254 /* color scanner seems to require this */
256 /* scu->geometry++; */
258 scu->linesize = geomtab[scu->geometry].bpl;
259 scu->height = geomtab[scu->geometry].dpl; /* default... */
264 *** allocate/reallocate a buffer
265 *** Now just checks that the preallocated buffer is large enough.
269 buffer_allocate(struct asc_unit *scu)
273 size = scu->blen * scu->linesize;
275 lprintf("asc.buffer_allocate: need 0x%x bytes\n", size);
277 if ( size > MAX_BUFSIZE ) {
279 size= ( (MAX_BUFSIZE+scu->linesize-1) / scu->linesize)*scu->linesize;
280 lprintf("asc.buffer_allocate: 0x%x bytes are too much, try 0x%x\n",
285 scu->sbuf.size = size;
288 scu->sbuf.count = 0; /* available data for reading */
290 lprintf("asc.buffer_allocate: ok\n");
296 *** invoked locally to start dma. Must run in a critical section
299 dma_restart(struct asc_unit *scu)
301 unsigned char al=scu->cmd_byte;
303 if (geomtab[scu->geometry].g_res==0) {/* color */
304 isa_dmastart(ISADMA_READ, scu->sbuf.base+scu->sbuf.wptr,
305 scu->linesize + 90 /* XXX */ , scu->dma_num);
307 * looks like we have to set and then clear this
308 * bit to enable the scanner to send interrupts
310 outb( ASC_CMD, al |= 4 ); /* seems to disable interrupts */
312 outb( ASC_CMD, al |= 8 ); /* ??? seems useless */
314 outb( ASC_CMD, al &= 0xfb );
316 } else { /* normal */
317 isa_dmastart(ISADMA_READ, scu->sbuf.base+scu->sbuf.wptr,
318 scu->linesize, scu->dma_num);
319 /*** this is done in sub_20, after dmastart ? ***/
321 outb( ASC_CMD, al |= 4 );
322 outb( ASC_CMD, al |= 8 ); /* ??? seems useless */
323 outb( ASC_CMD, al &= 0xfb );
326 outb( ASC_CMD, ASC_OPERATE);
329 scu->flags |= DMA_ACTIVE;
333 *** the main functions
337 *** resets the scanner and the config bytes...
340 asc_reset(struct asc_unit *scu)
342 scu->cfg_byte = 0 ; /* clear... */
343 scu->cmd_byte = 0 ; /* clear... */
345 outb(ASC_CFG,scu->cfg_byte); /* for safety, do this here */
346 outb(ASC_CMD,scu->cmd_byte); /* probably not needed */
347 tsleep((caddr_t)scu, PCATCH, "ascres", hz/10); /* sleep .1 sec */
349 scu->blen = DEFAULT_BLEN;
350 scu->btime = TIMEOUT;
351 scu->height = 0 ; /* don't know better... */
353 /**************************************************************************
356 *** read status port and check for proper configuration:
357 *** - if address group matches (status byte has reasonable value)
358 *** cannot check interrupt/dma, only clear the config byte.
361 ascprobe (struct isa_device *isdp)
363 int unit = isdp->id_unit;
364 struct asc_unit *scu = unittab + unit;
369 cdevsw_add(&asc_cdevsw);
371 scu->base = isdp->id_iobase; /*** needed by the following macros ***/
372 scu->flags = FLAG_DEBUG;
374 if ( isdp->id_iobase < 0 ) {
375 lprintf("asc%d.probe: no iobase given\n", unit);
379 if ((stb=inb(ASC_PROBE)) != ASC_PROBE_VALUE) {
380 lprintf("asc%d.probe: failed, got 0x%02x instead of 0x%02x\n",
381 unit, stb, ASC_PROBE_VALUE);
387 * the new AmiScan Color board uses int 10,11,12 instead of 3,5,10
388 * respectively. This means that the driver must act accordingly.
389 * Unfortunately there is no easy way of telling which board one has,
390 * other than trying to get an interrupt and noticing that it is
391 * missing. use "option ASC_NEW_BOARD" if you have a new board.
405 switch(ffs(isdp->id_irq) - 1) {
407 scu->int_byte = ASC_CNF_IRQ3;
410 scu->int_byte = ASC_CNF_IRQ5;
413 scu->int_byte = ASC_CNF_IRQ10;
418 lprintf("asc%d.probe: warning - going interruptless\n", unit);
422 lprintf("asc%d.probe: unsupported INT %d (only 3, 5, 10)\n",
423 unit, ffs(isdp->id_irq) - 1 );
426 scu->dma_num = isdp->id_drq;
427 switch(scu->dma_num) {
429 scu->dma_byte = ASC_CNF_DMA1;
432 scu->dma_byte = ASC_CNF_DMA3;
435 lprintf("asc%d.probe: unsupported DMA %d (only 1 or 3)\n",
440 /* lprintf("asc%d.probe: ok\n", unit); */
442 scu->flags &= ~FLAG_DEBUG;
444 return PROBE_SUCCESS;
447 /**************************************************************************
450 *** finish initialization of unit structure, get geometry value (?)
454 ascattach(struct isa_device *isdp)
456 int unit = isdp->id_unit;
457 struct asc_unit *scu = unittab + unit;
459 isdp->id_ointr = ascintr;
460 scu->flags |= FLAG_DEBUG;
461 printf("asc%d: [GI1904/Trust Ami-Scan Grey/Color]\n", unit);
464 * Initialize buffer structure.
465 * XXX this must be done early to give a good chance of getting a
466 * contiguous buffer. This wastes memory.
468 scu->sbuf.base = contigmalloc((unsigned long)MAX_BUFSIZE, M_DEVBUF, M_NOWAIT,
469 0ul, 0xfffffful, 1ul, 0x10000ul);
470 if ( scu->sbuf.base == NULL )
472 lprintf("asc%d.attach: buffer allocation failed\n", unit);
473 return ATTACH_FAIL; /* XXX attach must not fail */
475 scu->sbuf.size = INVALID;
476 scu->sbuf.rptr = INVALID;
478 scu->flags |= ATTACHED;
479 /* lprintf("asc%d.attach: ok\n", unit); */
480 scu->flags &= ~FLAG_DEBUG;
482 scu->selp.si_flags=0;
483 scu->selp.si_pid=(pid_t)0;
486 make_dev(&asc_cdevsw, unit<<6, ASC_UID, ASC_GID, 0666, "asc%d", unit);
487 make_dev(&asc_cdevsw, ((unit<<6) + FRMT_PBM),
488 ASC_UID, ASC_GID, 0666, "asc%dp", unit);
489 make_dev(&asc_cdevsw, ((unit<<6) + DBUG_MASK),
490 ASC_UID, ASC_GID, 0666, "asc%dd", unit);
491 make_dev(&asc_cdevsw, ((unit<<6) + DBUG_MASK+FRMT_PBM),
492 ASC_UID, ASC_GID, 0666, "asc%dpd", unit);
493 return ATTACH_SUCCESS;
496 /**************************************************************************
499 *** the interrupt routine, at the end of DMA...
504 struct asc_unit *scu = unittab + unit;
505 int chan_bit = 0x01 << scu->dma_num;
508 /* ignore stray interrupts... */
509 if ((scu->flags & (OPEN |READING)) != (OPEN | READING) ) {
510 /* must be after closing... */
511 scu->flags &= ~(OPEN | READING | DMA_ACTIVE | SLEEPING | SEL_COLL);
514 if ( (scu->flags & DMA_ACTIVE) && (inb(DMA1_READY) & chan_bit) != 0) {
515 outb( ASC_CMD, ASC_STANDBY);
516 scu->flags &= ~DMA_ACTIVE;
517 /* bounce buffers... */
518 isa_dmadone(ISADMA_READ, scu->sbuf.base+scu->sbuf.wptr,
519 scu->linesize, scu->dma_num);
520 scu->sbuf.wptr += scu->linesize;
521 if (scu->sbuf.wptr >= scu->sbuf.size) scu->sbuf.wptr=0;
522 scu->sbuf.count += scu->linesize;
523 if (scu->flags & SLEEPING) {
524 scu->flags &= ~SLEEPING;
525 wakeup((caddr_t)scu);
527 if (scu->sbuf.size - scu->sbuf.count >= scu->linesize) {
530 if (scu->selp.si_pid) {
531 selwakeup(&scu->selp);
532 scu->selp.si_pid=(pid_t)0;
533 scu->selp.si_flags = 0;
538 /**************************************************************************
541 *** set open flag, set modes according to minor number
543 *** don't switch scanner on, wait until first read or ioctls go before
547 ascopen(dev_t dev, int flags, int fmt, struct thread *td)
549 struct asc_unit *scu;
552 unit = UNIT(minor(dev)) & UNIT_MASK;
556 /* XXX lprintf isn't valid here since there is no scu. */
557 printf("asc%d.open: unconfigured unit number (max %d)\n", unit, NASC);
561 scu = unittab + unit;
562 if ( !( scu->flags & ATTACHED ) )
564 lprintf("asc%d.open: unit was not attached successfully 0x%04x\n",
569 if ( minor(dev) & DBUG_MASK )
570 scu->flags |= FLAG_DEBUG;
572 scu->flags &= ~FLAG_DEBUG;
574 switch(minor(dev) & FRMT_MASK) {
576 scu->flags |= PBM_MODE;
577 lprintf("asc%d.open: pbm mode\n", unit);
580 lprintf("asc%d.open: raw mode\n", unit);
581 scu->flags &= ~PBM_MODE;
584 lprintf("asc%d.open: gray maps are not yet supported", unit);
588 lprintf("asc%d.open: minor %d icnt %ld\n", unit, minor(dev), scu->icnt);
590 if ( scu->flags & OPEN ) {
591 lprintf("asc%d.open: already open", unit);
594 if (isa_dma_acquire(scu->dma_num))
597 scu->flags = ATTACHED | OPEN;
605 asc_startread(struct asc_unit *scu)
607 /*** from here on, things can be delayed to the first read/ioctl ***/
608 /*** this was done in sub_12... ***/
609 scu->cfg_byte= scu->cmd_byte=0; /* init scanner */
610 outb(ASC_CMD, scu->cmd_byte);
611 /*** this was done in sub_16, set scan len... ***/
612 outb(ASC_BOH, scu->portf_byte );
613 if (geomtab[scu->geometry].g_res==0) { /* color */
614 scu->cmd_byte = 0x00 ;
616 scu->cmd_byte = 0x90 ;
618 outb(ASC_CMD, scu->cmd_byte);
619 outb(ASC_LEN_L, scu->linesize & 0xff /* len_low */);
620 outb(ASC_LEN_H, (scu->linesize >>8) & 0xff /* len_high */);
621 /*** this was done in sub_21, config DMA ... ***/
622 scu->cfg_byte |= scu->dma_byte;
623 outb(ASC_CFG, scu->cfg_byte);
624 /*** sub_22: enable int on the scanner ***/
625 scu->cfg_byte |= scu->int_byte;
626 outb(ASC_CFG, scu->cfg_byte);
627 /*** sub_28: light on etc...***/
628 scu->cmd_byte = ASC_STANDBY;
629 outb(ASC_CMD, scu->cmd_byte);
630 tsleep((caddr_t)scu, PCATCH, "ascstrd", hz/10); /* sleep .1 sec */
634 /**************************************************************************
637 *** turn off scanner, release the buffer
638 *** should probably terminate dma ops, release int and dma. lr 12mar95
642 ascclose(dev_t dev, int flags, int fmt, struct thread *td)
644 int unit = UNIT(minor(dev));
645 struct asc_unit *scu = unittab + unit;
647 lprintf("asc%d.close: minor %d\n",
650 if ( unit >= NASC || !( scu->flags & ATTACHED ) ) {
651 lprintf("asc%d.close: unit was not attached successfully 0x%04x\n",
655 /* all this is in sub_29... */
657 outb(ASC_CFG, 0 ); /* don't save in CFG byte!!! */
658 scu->cmd_byte &= ~ASC_LIGHT_ON;
659 outb(ASC_CMD, scu->cmd_byte);/* light off */
660 tsleep((caddr_t)scu, PCATCH, "ascclo", hz/2); /* sleep 1/2 sec */
661 scu->cfg_byte &= ~ scu->dma_byte ; /* disable scanner dma */
662 scu->cfg_byte &= ~ scu->int_byte ; /* disable scanner int */
663 outb(ASC_CFG, scu->cfg_byte);
664 /* --- disable dma controller ? --- */
665 isa_dma_release(scu->dma_num);
666 /* --- disable interrupts on the controller (sub_24) --- */
668 scu->sbuf.size = INVALID;
669 scu->sbuf.rptr = INVALID;
671 scu->flags &= ~(FLAG_DEBUG | OPEN | READING);
677 pbm_init(struct asc_unit *scu)
679 int width = geomtab[scu->geometry].dpl;
680 int l= sprintf(scu->sbuf.base,"P4 %d %d\n", width, scu->height);
683 scu->bcount = scu->height * width / 8 + l;
685 /* move header to end of sbuf */
686 scu->sbuf.rptr=scu->sbuf.size-l;
687 bcopy(scu->sbuf.base, scu->sbuf.base+scu->sbuf.rptr,l);
689 if (geomtab[scu->geometry].g_res!=0) { /* BW scanner */
690 for(p = scu->sbuf.base + scu->sbuf.rptr; l; p++, l--)
694 /**************************************************************************
700 ascread(dev_t dev, struct uio *uio, int ioflag)
702 int unit = UNIT(minor(dev));
703 struct asc_unit *scu = unittab + unit;
708 lprintf("asc%d.read: minor %d icnt %ld\n", unit, minor(dev), scu->icnt);
710 if ( unit >= NASC || !( scu->flags & ATTACHED ) ) {
711 lprintf("asc%d.read: unit was not attached successfully 0x%04x\n",
716 if ( !(scu->flags & READING) ) { /*** first read... ***/
717 /* allocate a buffer for reading data and init things */
718 if ( (res = buffer_allocate(scu)) == SUCCESS ) scu->flags |= READING;
721 if ( scu->flags & PBM_MODE ) { /* initialize for pbm mode */
726 lprintf("asc%d.read(before): "
727 "sz 0x%x, rptr 0x%x, wptr 0x%x, cnt 0x%x bcnt 0x%x flags 0x%x icnt %ld\n",
728 unit, scu->sbuf.size, scu->sbuf.rptr,
729 scu->sbuf.wptr, scu->sbuf.count, scu->bcount,scu->flags,
733 if ( scu->sbuf.count == 0 ) { /* no data avail., must wait */
734 if (!(scu->flags & DMA_ACTIVE)) dma_restart(scu);
735 scu->flags |= SLEEPING;
736 res = tsleep((caddr_t)scu, PCATCH, "ascread", 0);
737 scu->flags &= ~SLEEPING;
738 if ( res == 0 ) res = SUCCESS;
740 splx(sps); /* lower priority... */
741 if (scu->flags & FLAG_DEBUG)
742 tsleep((caddr_t)scu, PCATCH, "ascdly",hz);
743 lprintf("asc%d.read(after): "
744 "sz 0x%x, rptr 0x%x, wptr 0x%x, cnt 0x%x bcnt 0x%x flags 0x%x icnt %ld\n",
745 unit, scu->sbuf.size, scu->sbuf.rptr,
746 scu->sbuf.wptr, scu->sbuf.count, scu->bcount,scu->flags,scu->icnt);
748 /* first, not more than available... */
749 nbytes = min( uio->uio_resid, scu->sbuf.count );
750 /* second, contiguous data... */
751 nbytes = min( nbytes, (scu->sbuf.size - scu->sbuf.rptr) );
752 /* third, one line (will remove this later, XXX) */
753 nbytes = min( nbytes, scu->linesize );
754 if ( (scu->flags & PBM_MODE) )
755 nbytes = min( nbytes, scu->bcount );
756 lprintf("asc%d.read: transferring 0x%x bytes\n", unit, nbytes);
757 if (geomtab[scu->geometry].g_res!=0) { /* BW scanner */
758 lprintf("asc%d.read: invert buffer\n",unit);
759 for(p = scu->sbuf.base + scu->sbuf.rptr, res=nbytes; res; p++, res--)
762 res = uiomove(scu->sbuf.base + scu->sbuf.rptr, nbytes, uio);
763 if ( res != SUCCESS ) {
764 lprintf("asc%d.read: uiomove failed %d", unit, res);
769 scu->sbuf.rptr += nbytes;
770 if (scu->sbuf.rptr >= scu->sbuf.size) scu->sbuf.rptr=0;
771 scu->sbuf.count -= nbytes;
772 /* having moved some data, can read mode */
773 if (!(scu->flags & DMA_ACTIVE)) dma_restart(scu);
774 splx(sps); /* lower priority... */
775 if ( scu->flags & PBM_MODE ) scu->bcount -= nbytes;
777 lprintf("asc%d.read: size 0x%x, pointer 0x%x, bcount 0x%x, ok\n",
778 unit, scu->sbuf.size, scu->sbuf.rptr, scu->bcount);
783 /**************************************************************************
789 ascioctl(dev_t dev, u_long cmd, caddr_t data, int flags, struct thread *td)
791 int unit = UNIT(minor(dev));
792 struct asc_unit *scu = unittab + unit;
794 lprintf("asc%d.ioctl: minor %d\n",
797 if ( unit >= NASC || !( scu->flags & ATTACHED ) ) {
798 lprintf("asc%d.ioctl: unit was not attached successfully 0x%04x\n",
806 *(int *)data=geomtab[scu->geometry].dpi;
807 lprintf("asc%d.ioctl:ASC_GRES %ddpi\n", unit, *(int *)data);
810 *(int *)data=geomtab[scu->geometry].dpl;
811 lprintf("asc%d.ioctl:ASC_GWIDTH %d\n", unit, *(int *)data);
814 *(int *)data=scu->height;
815 lprintf("asc%d.ioctl:ASC_GHEIGHT %d\n", unit, *(int *)data);
818 lprintf("asc%d.ioctl:ASC_SHEIGHT %d\n", unit, *(int *)data);
819 if ( scu->flags & READING ) {
820 lprintf("asc%d:ioctl on already reading unit\n", unit);
823 scu->height=*(int *)data;
827 *(int *)data=scu->blen;
828 lprintf("asc%d.ioctl:ASC_GBLEN %d\n", unit, *(int *)data);
831 lprintf("asc%d.ioctl:ASC_SBLEN %d\n", unit, *(int *)data);
832 if (*(int *)data * geomtab[scu->geometry].dpl / 8 > MAX_BUFSIZE)
834 lprintf("asc%d:ioctl buffer size too high\n", unit);
837 scu->blen=*(int *)data;
840 *(int *)data = scu->btime / hz;
841 lprintf("asc%d.ioctl:ASC_GBTIME %d\n", unit, *(int *)data);
844 scu->btime = *(int *)data * hz;
845 lprintf("asc%d.ioctl:ASC_SBTIME %d\n", unit, *(int *)data);
848 default: return ENOTTY;
854 ascpoll(dev_t dev, int events, struct thread *td)
856 int unit = UNIT(minor(dev));
857 struct asc_unit *scu = unittab + unit;
868 if (events & (POLLIN | POLLRDNORM)) {
869 if (scu->sbuf.count >0)
870 revents |= events & (POLLIN | POLLRDNORM);
872 if (!(scu->flags & DMA_ACTIVE))
875 if (scu->selp.si_pid && (p1=pfind(scu->selp.si_pid))
876 && p1->p_wchan == (caddr_t)&selwait)
877 scu->selp.si_flags = SI_COLL;
879 scu->selp.si_pid = p->p_pid;