4 # This is rc.conf - a file full of useful variables that you can set
5 # to change the default startup behavior of your system. You should
6 # not edit this file! Put any overrides into one of the ${rc_conf_files}
7 # instead and you will be able to update these defaults later without
8 # spamming your local configuration information.
10 # The ${rc_conf_files} files should only contain values which override
11 # values set in this file. This eases the upgrade path when defaults
12 # are changed and new features are added.
14 # All arguments must be in double or single quotes.
16 # $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $
17 # $DragonFly: src/etc/defaults/rc.conf,v 1.52 2008/10/03 00:26:21 hasso Exp $
19 ##############################################################
20 ### Important initial Boot-time options ####################
21 ##############################################################
23 rc_debug="NO" # Set to YES to enable debugging output from rc.d
24 rc_info="YES" # Enables display of informational messages at boot.
25 rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
26 swapfile="NO" # Set to name of swapfile if aux swapfile desired.
27 apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
28 apmd_enable="NO" # Run apmd to handle APM event from userland.
29 apmd_flags="" # Flags to apmd (if enabled).
30 battd_enable="NO" # Set to YES to have battd alert on 10% battery power remaining.
31 battd_flags="" # Flags to battd (if enabled).
32 sensorsd_enable="NO" # Run sensorsd to monitor and log sensor state changes.
33 sensorsd_flags="" # additional flags for sensorsd(8).
34 pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
35 pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether
36 removable_interfaces="" # Removable network interfaces for /etc/pccard_ether.
37 local_startup="/usr/pkg/etc/rc.d /usr/local/etc/rc.d /usr/pkg/xorg/etc/rc.d /usr/X11R6/etc/rc.d"
38 # startup script dirs.
39 script_name_sep=" " # Change if your startup scripts' names contain spaces
40 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
41 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
42 netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems.
43 extra_netfs_types="NO" # List of network extra filesystem types for delayed
44 # mount at startup (or NO).
46 ##############################################################
47 ### Network configuration sub-section ######################
48 ##############################################################
50 ### Basic network and firewall/security options: ###
52 # see 'man firewall' for an explanation of the default firewall rules
54 hostname="" # Set this!
55 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
56 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
57 dhclient_flags="" # Additional flags to pass to dhcp client.
58 firewall_enable="NO" # Set to YES to enable firewall functionality
59 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
60 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
61 firewall_trusted_nets="192.168.0.0/16" # list of trusted nets
62 firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0"
63 firewall_allowed_icmp_types="0 3 8 11 12 13 14"
64 firewall_open_tcp_ports="22 25 53 80 113 443"
65 firewall_open_udp_ports="53"
66 firewall_quiet="NO" # Set to YES to suppress rule display
67 firewall_logging="NO" # Set to YES to enable events logging
68 firewall_flags="" # Flags passed to ipfw when type is a file
69 ip_portrange_first="NO" # Set first dynamically allocated port
70 ip_portrange_last="NO" # Set last dynamically allocated port
71 ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
72 ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
73 natd_program="/sbin/natd" # path to natd, if you want a different one.
74 natd_enable="NO" # Enable natd (if firewall_enable == YES).
75 natd_interface="" # Public interface or IPaddress to use.
76 natd_flags="" # Additional flags for natd.
77 ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
78 ipfilter_program="/sbin/ipf" # where the ipfilter program lives
79 ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
80 # /usr/src/contrib/ipfilter/rules for examples
81 ipfilter_flags="" # additional flags for ipfilter
82 ipnat_enable="NO" # Set to YES to enable ipnat functionality
83 ipnat_program="/sbin/ipnat" # where the ipnat program lives
84 ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
85 ipnat_flags="" # additional flags for ipnat
86 ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
87 ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
88 ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
89 ipfs_enable="NO" # Set to YES to enable saving and restoring
90 # of state tables at shutdown and boot
91 ipfs_program="/sbin/ipfs" # where the ipfs program lives
92 ipfs_flags="" # additional flags for ipfs
93 pf_enable="NO" # Set to YES to enable packet filter (pf)
94 pf_rules="/etc/pf.conf" # rules definition file for pf
95 pf_program="/usr/sbin/pfctl" # where the pfctl program lives
96 pf_flags="" # additional flags for pfctl
97 pflog_enable="NO" # Set to YES to enable packet filter logging
98 pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
99 pflog_program="/usr/sbin/pflogd" # where the pflogd program lives
100 pflog_flags="" # additional flags for pflogd
101 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
102 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
103 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
104 # For the following option you need to have TCP_DROP_SYNFIN set in your
105 # kernel. Please refer to LINT and NOTES for details.
106 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
107 # NOTE: this violates the TCP specification
108 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
109 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
110 network_interfaces="auto" # List of network interfaces (or "auto").
111 cloned_interfaces="" # List of cloned network interfaces to create.
112 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
113 ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
114 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
115 #ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
116 #ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
118 # If you have any sppp(4) interfaces above, you might also want to set
119 # the following parameters. Refer to spppcontrol(8) for their meaning.
120 sppp_interfaces="" # List of sppp interfaces.
121 #sppp_interfaces="isp0" # example: sppp over ISDN
122 #spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
123 gif_interfaces="NO" # List of GIF tunnels (or "NO").
124 #gif_interfaces="gif0 gif1" # Examples typically for a router.
125 # Choose correct tunnel addrs.
126 #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
127 #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
129 # User ppp configuration.
130 ppp_enable="NO" # Start user-ppp (or NO).
131 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
132 # For details see man page for ppp(8). Default is auto.
133 ppp_nat="YES" # Use PPP's internal network address translation or NO.
134 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
135 ppp_user="root" # Which user to run ppp as
137 ### Network daemon (miscellaneous) ###
138 hostapd_enable="NO" # Run hostap daemon.
139 syslogd_enable="YES" # Run syslog daemon (or NO).
140 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
141 #syslogd_flags="-s" # Flags to syslogd (if enabled).
142 syslogd_flags="-ss" # Syslogd flags to not bind an inet socket
143 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
144 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
145 inetd_flags="-wW" # Optional flags to inetd
147 # named. It may be possible to run named in a sandbox, man security for
148 # details. Note: when named_chrootdir is specified, RCNG automatically
151 named_enable="NO" # Run named, the DNS server (or NO).
152 named_program="/usr/sbin/named" # path to named, if you want a different one.
153 named_pidfile="/var/run/named.pid" # Pid file
154 named_chrootdir="/etc/namedb" # Chroot directory (or "" not to auto-chroot it)
156 rwhod_enable="NO" # Run the rwho daemon (or NO).
157 rwhod_flags="" # Flags for rwhod
158 rarpd_enable="NO" # Run rarpd (or NO).
159 rarpd_flags="" # Flags to rarpd.
160 bootparamd_enable="NO" # Run bootparamd (or NO).
161 bootparamd_flags="" # Flags to bootparamd
162 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
163 pppoed_provider="*" # Provider and ppp(8) config file entry.
164 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
165 pppoed_interface="fxp0" # The interface that pppoed runs on.
166 sshd_enable="NO" # Enable sshd
167 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
168 sshd_flags="" # Additional flags for sshd.
170 ftpd_enable="NO" # Run stand-alone ftp daemon (or NO).
171 ftpd_flags="" # Flags for ftpd, -D added implicitly.
173 ### Network File System (NFS): ###
174 ### Server-side options also need rpcbind_enable="YES" ###
176 ### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If
177 ### the mtime matches the data cache is left intact.
179 amd_enable="NO" # Run amd service with $amd_flags (or NO).
180 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
181 amd_map_program="NO" # Can be set to "ypcat -k amd.master"
182 nfs_client_enable="NO" # This host is an NFS client (or NO).
183 nfs_access_cache="5" # Client attribute cache timeout in seconds
184 #nfs_neg_cache="3" # Client attribute negative hit cache timeout
185 nfs_server_enable="NO" # This host is an NFS server (or NO).
186 nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
187 mountd_enable="NO" # Run mountd (or NO).
188 mountd_flags="-r" # Flags to mountd (if NFS server enabled).
189 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
190 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
191 nfs_bufpackets="" # bufspace (in packets) for client
192 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
193 rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
194 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
195 rpc_statd_flags="" # Flags to rpc.statd (if enabled).
196 rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown
197 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
198 rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
199 rpcbind_flags="" # Flags to rpcbind (if enabled).
200 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
201 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
202 keyserv_flags="" # Flags to keyserv (if enabled).
204 ### Network Time Services options: ###
205 timed_enable="NO" # Run the time daemon (or NO).
206 timed_flags="" # Flags to timed (if enabled).
207 dntpd_enable="NO" # Run dntpd Network Time Protocol (or NO).
208 dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one.
209 dntpd_flags="" # Flags to dntpd (if enabled) also server name(s)
211 # Bluetooth deamons and options:
212 btconfig_enable="NO" # Configure Bluetooth devices (or NO).
213 btconfig_devices="" # List of Bluetooth devices (or empty for all).
214 #btconfig_<device>="" # Parameters to pass to <device>.
215 btconfig_args="" # Parameters to pass to all devices.
216 sdpd_enable="NO" # Run the Service Discovery Profile daemon (or NO).
217 sdpd_flags="" # Flags to sdpd (if enabled).
218 bthcid_enable="NO" # Run the Bluetooth Link Key/PIN Code Manager (or NO).
219 bthcid_flags="" # Flags to bthcid (if enabled).
221 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
222 nis_client_enable="NO" # We're an NIS client (or NO).
223 nis_client_flags="" # Flags to ypbind (if enabled).
224 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
225 nis_ypset_flags="" # Flags to ypset (if enabled).
226 nis_server_enable="NO" # We're an NIS server (or NO).
227 nis_server_flags="" # Flags to ypserv (if enabled).
228 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
229 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
230 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
231 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
233 ### Network routing options: ###
234 defaultrouter="NO" # Set to default gateway (or NO).
235 static_routes="" # Set to static route list (or leave empty).
236 gateway_enable="NO" # Set to YES if this host will be a gateway.
237 router_enable="NO" # Set to YES to enable a routing daemon.
238 router_program="/sbin/routed" # Name of routing daemon to use if enabled.
239 router_flags="-q" # Flags for routing daemon.
240 mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
241 mrouted_flags="" # Flags for multicast routing daemon.
242 ipxgateway_enable="NO" # Set to YES to enable IPX routing.
243 ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
244 ipxrouted_flags="" # Flags for IPX routing daemon.
245 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
246 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
247 accept_sourceroute="NO" # accept source routed packets to us
249 ### ATM interface options: ###
250 atm_enable="NO" # Configure ATM interfaces (or NO).
251 #atm_netif_hea0="atm 1" # Network interfaces for physical interface.
252 #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
253 #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
254 #atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
255 #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
256 #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
257 atm_arps="" # Set to permanent ARP list (or leave empty).
259 ### ISDN interface options: (see also: /usr/share/examples/isdn) ###
260 isdn_enable="NO" # Enable the ISDN subsystem (or NO).
261 isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode).
262 isdn_flags="-dn -d0x1f9" # Flags for isdnd
263 isdn_ttype="cons25" # terminal type for fullscreen mode
264 isdn_screenflags="NO" # screenflags for ${isdn_fsdev}
265 isdn_trace="NO" # Enable the ISDN trace subsystem (or NO).
266 isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace
268 ### Miscellaneous network options: ###
269 icmp_bmcastecho="NO" # respond to broadcast ping packets
271 ### IPv6 options: ###
272 ipv6_enable="NO" # Set to YES to set up for IPv6.
273 ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
274 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
275 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
276 ipv6_static_routes="" # Set to static route list (or leave empty).
277 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
278 # route toward loopback interface.
279 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
280 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
281 ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
282 ipv6_router_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
283 ipv6_router_flags="" # Flags to IPv6 routing daemon.
284 #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
286 #ipv6_router_flags="-q" # If you want to run a routing daemon on an end
287 # node, you should stop advertisement.
288 #ipv6_network_interfaces="ed0 ep0" # Examples for router
289 # or static configuration for end node.
290 # Choose correct prefix value.
291 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
292 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
293 #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
294 #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
295 ipv6_default_interface="NO" # Default output interface for scoped addrs.
296 # Now this works only for IPv6 link local
298 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
299 # advertisement daemon. If set to YES,
300 # this router becomes a possible candidate
301 # IPv6 default router for local subnets.
302 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
303 rtsold_enable="NO" # Set to YES to enable an IPv6 routing
304 # solicitation daemon. This is used for
305 # automatic discovery of non-link local
307 rtsold_flags="-a" # Do autoprobing of outgoing interface.
308 mroute6d_enable="NO" # Do IPv6 multicast routing.
309 mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
310 # routing daemon. You need to
311 # install it from package or
313 mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
314 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
315 # tunneling interface. Specify this entry
316 # to enable 6to4 interface.
317 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
318 # to limit peer addr range. Effective value
320 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
321 # If you like, you can set "AUTO" for this.
322 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
323 ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
324 # IPv6-to-IPv4 TCP translator. You also need
326 ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
327 # communication. (like ::ffff:a.b.c.d)
328 ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
330 ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
331 ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
332 ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
333 ipv6_firewall_logging="NO" # Set to YES to enable events logging
334 ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
335 ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
336 # see /usr/src/contrib/ipfilter/rules
339 ##############################################################
340 ### System console options #################################
341 ##############################################################
343 keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
344 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
345 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
346 keychange="NO" # function keys default values (or NO).
347 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
348 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
349 font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
350 font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
351 font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
352 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
353 saver="NO" # screen saver: Uses /modules/${saver}_saver.ko
354 moused_enable="NO" # Run the mouse daemon.
355 moused_type="auto" # See man page for rc.conf(5) for available settings.
356 moused_port="/dev/psm0" # Set to your mouse port.
357 moused_flags="" # Any additional flags to moused.
358 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
359 # language code table, specify alternative range
360 # start like mousechar_start=3, see vidcontrol(1)
361 vidhistory="" # Set video history buffer size
362 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
363 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
366 ##############################################################
367 ### Mail Transfer Agent (MTA) options ######################
368 ##############################################################
370 mta_start_script="/etc/rc.sendmail"
371 # Script to start your chosen MTA, called by /etc/rc.
372 # Settings for /etc/rc.sendmail:
373 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
374 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
375 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
376 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
377 # Flags for localhost-only MTA
378 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
379 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
380 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
381 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
382 # Flags for sendmail_msp_queue daemon.
383 sendmail_rebuild_aliases="YES" # Run newaliases if necessary (YES/NO).
386 ##############################################################
387 ### Miscellaneous administrative options ###################
388 ##############################################################
390 mixer_enable="NO" # Manage mixer settings across reboots
391 cron_enable="YES" # Run the periodic job daemon.
392 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
393 cron_flags="" # Which options to pass to the cron daemon.
394 lpd_enable="NO" # Run the line printer daemon.
395 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
396 lpd_flags="" # Flags to lpd (if enabled).
397 nscd_enable="NO" # Run the nsswitch caching daemon.
398 usbd_enable="NO" # Run the usbd daemon.
399 usbd_flags="" # Flags to usbd (if enabled).
400 devd_enable="NO" # Rund devd(8) daemon.
401 devd_flags="" # Flags to devd(8) (if enabled).
402 dumpdev="NO" # Device name to crashdump to (or NO).
403 dumpdir="/var/crash" # Directory where crash dumps are to be stored
404 savecore_flags="" # Used if dumpdev is enabled above, and present.
405 enable_quotas="NO" # turn on quotas on startup (or NO).
406 check_quotas="YES" # Check quotas on startup (or NO).
407 accounting_enable="NO" # Turn on process accounting (or NO).
408 sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
409 linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
410 clear_tmp_enable="NO" # Clear /tmp at startup.
411 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
412 ldconfig_paths="/usr/lib /usr/lib/gcc* /usr/lib/compat /usr/pkg/lib /usr/pkg/xorg/lib /usr/local/lib"
413 # shared library search paths
414 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
415 update_motd="YES" # update version info in /etc/motd (or NO)
416 start_vinum="NO" # set to YES to start vinum
417 rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO).
418 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
419 newsyslog_enable="NO" # Run newsyslog at startup.
420 newsyslog_flags="" # Flags to newsyslog (if enabled).
421 resident_enable="NO" # Process /etc/resident.conf
422 varsym_enable="NO" # Process /etc/varsym.conf
423 watchdogd_enable="NO" # Start the software watchdog daemon
425 ##############################################################
426 ### Jail Configuration #######################################
427 ##############################################################
429 jail_enable="NO" # Set to NO to disable starting of any jails
430 jail_list="" # Space separated list of names of jails
431 jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
432 jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
433 jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
436 # To use rc's built-in jail infrastructure create entries for
437 # each jail, specified in jail_list, with the following variables.
439 # - replace 'example' with the jail's name.
440 # - except rootdir, hostname and ip, all of the following variables may be made
441 # global jail variables if you don't specify a jail name (ie. jail_interface).
443 #jail_example_rootdir="/usr/jail/default" # Jail's root directory
444 #jail_example_hostname="default.domain.com" # Jail's hostname
445 #jail_example_ip="192.168.0.10" # Jail's IP number
446 #jail_example_interface="" # Interface to create the IP alias on
447 #jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting
448 #jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping
449 #jail_example_fdesc_enable="NO" # mount fdesc in the jail
450 #jail_example_procfs_enable="NO" # mount procfs in jail
451 #jail_example_mount_enable="NO" # mount/umount jail's fs
452 #jail_example_fstab="" # fstab(5) for mount/umount
453 #jail_example_flags="-l -U root" # flags for jail(8)
455 ##############################################################
456 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
457 ### scripts to source rc_conf_files overrides safely. ##
458 ##############################################################
460 if [ -z "${source_rc_confs_defined}" ]; then
461 source_rc_confs_defined=yes
463 local i sourced_files
464 for i in ${rc_conf_files}; do
465 case ${sourced_files} in
469 sourced_files="${sourced_files}:$i:"
lentferj's projects / dragonfly.git / blob