2 # GENERIC -- Generic kernel configuration file for DragonFly/x86_64
4 # Check the LINT configuration file in sys/config, for an
5 # exhaustive list of options.
14 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
16 options INET #InterNETworking
17 options INET6 #IPv6 communications protocols
18 options HAMMER #Hammer Filesystem
19 options NULLFS #NULL filesystem
20 options FFS #Berkeley Fast Filesystem
21 options FFS_ROOT #FFS usable as root device [keep this!]
22 options SOFTUPDATES #Enable FFS soft updates support
23 options UFS_DIRHASH #Improve performance on big directories
24 options MFS #Memory Filesystem
25 options TMPFS #Temporary Filesystem
26 options MD_ROOT #MD is a potential root device
27 options NFS #Network Filesystem
28 options NFS_ROOT #NFS usable as root device, NFS required
29 options MSDOSFS #MSDOS Filesystem
30 options CD9660 #ISO 9660 Filesystem
31 options PROCFS #Process filesystem
32 options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
33 options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
34 options DEVICE_POLLING # Support mixed interrupt-polling
35 # handling of network device drivers
36 options UCONSOLE #Allow users to grab the console
37 options KTRACE #ktrace(1) support
38 options SYSVSHM #SYSV-style shared memory
39 options SYSVMSG #SYSV-style message queues
40 options SYSVSEM #SYSV-style semaphores
41 options P1003_1B #Posix P1003_1B real-time extensions
42 options _KPOSIX_PRIORITY_SCHEDULING
43 options ICMP_BANDLIM #Rate limit bad replies
44 options KBD_INSTALL_CDEV # install a CDEV entry in /dev
45 options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
46 # output. Adds ~128k to driver.
47 options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
48 # output. Adds ~215k to driver.
50 # To make an SMP kernel both SMP and APIC_IO are usually
51 # specified. SMP boxes with severely broken BIOSes which
52 # boot fine for non-SMP builds *might* work in SMP mode
53 # if you define SMP and leave APIC_IO turned off.
55 #options SMP # Symmetric MultiProcessor Kernel
56 #options APIC_IO # Symmetric (APIC) I/O
58 # Debugging for Development
66 # AHCI driver, this will override NATA for AHCI devices,
67 # both drivers may be included.
75 # NEW-ATA (NATA) and ATAPI devices
78 device natadisk # ATA disk drives
79 device natapicd # ATAPI CDROM drives
80 device natapifd # ATAPI floppy drives
81 device natapist # ATAPI tape drives
82 device natapicam # Emulate ATAPI devices as SCSI
83 device nataraid # support for ATA software RAID
85 device natausb # ATA-over-USB support
86 options ATA_STATIC_ID # Static device numbering
88 # LEGACY ATA and ATAPI devices
89 #device ata0 at isa? port IO_WD1 irq 14
90 #device ata1 at isa? port IO_WD2 irq 15
92 #device atadisk # ATA disk drives
93 #device atapicd # ATAPI CDROM drives
94 #device atapifd # ATAPI floppy drives
95 #device atapist # ATAPI tape drives
96 #device atapicam # Emulate ATAPI devices as SCSI via CAM
97 #options ATA_STATIC_ID #Static device numbering
100 device ahb # EISA AHA1742 family
101 device ahc # AHA2940 and onboard AIC7xxx devices
102 device ahd # AHA39320/29320 and onboard AIC79xx devices
103 device amd # AMD 53C974 (Tekram DC-390(T))
104 device isp # Qlogic family
105 device mpt # LSI-Logic MPT/Fusion
106 device ncr # NCR/Symbios Logic
107 device sym # NCR/Symbios Logic (newer chipsets)
108 options SYM_SETUP_LP_PROBE_MAP=0x40
109 # Allow ncr to attach legacy NCR devices when
110 # both sym and ncr are configured
118 device ncv # NCR 53C500
119 device nsp # Workbit Ninja SCSI-3
120 device stg # TMC 18C30/18C50
123 device scbus # SCSI bus (required)
124 device da # Direct Access (disks)
125 device sa # Sequential Access (tape etc)
127 device pass # Passthrough device (direct SCSI access)
128 device sg # Passthrough device (linux scsi generic)
130 # RAID controllers interfaced to the SCSI subsystem
131 device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
132 device dpt # DPT Smartcache - See LINT for options!
133 device iir # Intel Integrated RAID
134 device mly # Mylex AcceleRAID/eXtremeRAID
135 device ciss # Compaq SmartRAID 5* series
138 device aac # Adaptec FSA RAID, Dell PERC2/PERC3
139 #device aacp # SCSI passthrough for aac (requires CAM)
140 device ida # Compaq Smart RAID
141 device ips # IBM ServeRAID
142 device amr # AMI MegaRAID
143 device mlx # Mylex DAC960 family
144 device twe # 3ware Escalade 7000/8000's
145 device twa # 3ware 9000 series PATA/SATA RAID
147 # atkbdc0 controls both the keyboard and the PS/2 mouse
148 device atkbdc0 at isa? port IO_KBD
149 device atkbd0 at atkbdc? irq 1 flags 0x1
150 device psm0 at atkbdc? irq 12
154 # kbdmux is the keyboard multiplexer
157 # splash screen/screen saver
160 # syscons is the default console driver, resembling an SCO console
161 device sc0 at isa? flags 0x100
162 options SC_PIXEL_MODE # add support for the raster text mode
164 device agp # support several AGP chipsets
166 # HW monitoring devices
167 device aps0 at isa? port 0x1600
168 device lm0 at isa? port 0x290
169 device it0 at isa? port 0x290
170 device it1 at isa? port 0xc00
171 device it2 at isa? port 0xd00
172 device it3 at isa? port 0x228
173 device wbsio0 at isa? port 0x2e
174 device wbsio1 at isa? port 0x4e
175 device lm#3 at wbsio?
177 # PCCARD (PCMCIA) support
183 device sio0 at isa? port IO_COM1 flags 0x10 irq 4
184 device sio1 at isa? port IO_COM2 irq 3
185 device sio2 at isa? disable port IO_COM3 irq 5
186 device sio3 at isa? disable port IO_COM4 irq 9
189 device ppc0 at isa? irq 7
190 device ppbus # Parallel port bus (required)
192 device plip # TCP/IP over parallel
193 device ppi # Parallel port interface device
194 #device vpo # Requires scbus and da
198 device de # DEC/Intel DC21x4x (``Tulip'')
199 device txp # 3Com 3cR990 (``Typhoon'')
200 device vx # 3Com 3c590, 3c595 (``Vortex'')
202 device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
204 device ig_hal # Intel PRO/1000 hardware abstraction layer
206 # PCI Ethernet NICs that use the common MII bus controller code.
207 # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
208 device miibus # MII bus support
209 device ae # Attansic/Atheros L2 Fast Ethernet
210 device age # Attansic/Atheros L1 Gigabit Ethernet
211 device alc # Atheros AR8131/AR8132
212 device ale # Atheros AR8121/AR8113/AR8114
213 device bce # Broadcom NetXtreme II Gigabit Ethernet
214 device bfe # Broadcom BCM440x 10/100 Ethernet
215 device dc # DEC/Intel 21143 and various workalikes
216 device et # Agere ET1310 10/100/1000 Ethernet
217 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
218 device jme # JMicron Gigabit/Fast Ethernet
219 device pcn # AMD Am79C97x PCI 10/100 NICs
220 device rl # RealTek 8129/8139
221 device re # RealTek 8139C+/8169
222 device sf # Adaptec AIC-6915 (``Starfire'')
223 device sis # Silicon Integrated Systems SiS 900/SiS 7016
224 device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
225 device ste # Sundance ST201 (D-Link DFE-550TX)
226 device tl # Texas Instruments ThunderLAN
227 device tx # SMC EtherPower II (83c170 ``EPIC'')
228 device vge # VIA 612x GigE
229 device vr # VIA Rhine, Rhine II
230 device wb # Winbond W89C840F
231 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
232 device bge # Broadcom BCM570x (``Tigon III'')
233 device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
234 device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
235 device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
238 # 'device ed' requires 'device miibus'
239 device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
245 options IEEE80211_DEBUG #enable debugging msgs
246 options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support
247 options IEEE80211_SUPPORT_TDMA #enable TDMA support
248 device wlan # 802.11 support
249 device wlan_ccmp # 802.11 CCMP support
250 device wlan_tkip # 802.11 TKIP support
251 device wlan_wep # 802.11 WEP support
252 #device wlan_amrr # AMRR
254 # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
255 # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
256 # mode (the factory default). If you set the switches on your ISA
257 # card for a manually chosen I/O address and IRQ, you must specify
258 # those parameters here.
260 device ral # Ralink Technology 802.11 wireless NIC
261 #device rtw # RealTek 802.11 wireless NIC
262 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
263 # exists only as a PCMCIA device, so there is no ISA attachment needed
264 # and resources will always be dynamically assigned by the pccard code.
267 # The probe order of these is presently determined by i386/isa/isa_compat.c.
268 #device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
269 device lnc0 at isa? disable port 0x280 irq 10 drq 0
270 device cs0 at isa? disable port 0x300
271 device sn0 at isa? disable port 0x300 irq 10
273 # Pseudo devices - the number indicates how many units to allocate.
274 pseudo-device loop # Network loopback
275 pseudo-device ether # Ethernet support
276 pseudo-device sl 1 # Kernel SLIP
277 pseudo-device ppp 1 # Kernel PPP
278 pseudo-device tun # Packet tunnel.
279 pseudo-device pty # Pseudo-ttys (telnet etc)
280 pseudo-device md # Memory "disks"
281 pseudo-device gif # IPv6 and IPv4 tunneling
282 pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
284 # The `bpf' pseudo-device enables the Berkeley Packet Filter.
285 # Be aware of the administrative consequences of enabling this!
286 pseudo-device bpf #Berkeley packet filter
288 pseudo-device crypto # core crypto support, used by wlan
291 device uhci # UHCI PCI->USB interface
292 device ohci # OHCI PCI->USB interface
293 device usb # USB Bus (required)
294 device ugen # Generic
295 device uhid # "Human Interface Devices"
296 device ukbd # Keyboard
297 device ulpt # Printer
298 device umass # Disks/Mass storage - Requires scbus and da
300 device uscanner # Scanners
301 device urio # Diamond Rio MP3 Player
302 # USB Ethernet, requires mii
303 device aue # ADMtek USB ethernet
304 device axe # ASIX Electronics USB Ethernet
305 device cue # CATC USB ethernet
306 device kue # Kawasaki LSI USB ethernet
307 device rue # RealTek 8150 based USB ethernet
308 # USB wireless NICs, requires wlan, wlan_amrr
309 #device rum # Ralink Technology RT2501USB/RT2601USB
310 #device ural # Ralink Technology RT2500USB
313 device firewire # FireWire bus code
314 device sbp # SCSI over FireWire (Requires scbus and da)
315 device fwe # Ethernet over FireWire (non-standard!)