.\" @(#) $Header: /tcpdump/master/libpcap/pcap-linktype.manmisc.in,v 1.1.2.4 2008-10-27 22:52:05 guy Exp $
.\"
.\" Copyright (c) 1987, 1988, 1989, 1990, 1991, 1992, 1994, 1995, 1996, 1997
.\"	The Regents of the University of California.  All rights reserved.
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that: (1) source code distributions
.\" retain the above copyright notice and this paragraph in its entirety, (2)
.\" distributions including binary code include the above copyright notice and
.\" this paragraph in its entirety in the documentation or other materials
.\" provided with the distribution, and (3) all advertising materials mentioning
.\" features or use of this software display the following acknowledgement:
.\" ``This product includes software developed by the University of California,
.\" Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
.\" the University nor the names of its contributors may be used to endorse
.\" or promote products derived from this software without specific prior
.\" written permission.
.\" THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
.\" WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
.\" MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
.\"
.TH PCAP-LINKTYPE @MAN_MISC_INFO@ "23 October 2008"
.SH NAME
pcap-linktype \- link-layer header types supported by libpcap
.SH DESCRIPTION
For a live capture or ``savefile'', libpcap supplies, as the return
value of the
.BR pcap_datalink (3PCAP)
routine, a value that indicates the type of link-layer header at the
beginning of the packets it provides.  This is not necessarily the type
of link-layer header that the packets being captured have on the network
from which they're being captured; for example, packets from an IEEE
802.11 network might be provided by libpcap with Ethernet headers that
the network adapter or the network adapter driver generates from the
802.11 headers.  The names for those values begin with
.BR DLT_ ,
so they are sometimes called "DLT_ values".
.PP
The values stored in the link-layer header type field in the savefile
header are, in most but not all cases, the same as the values returned
by
.BR pcap_datalink() .
The names for those values begin with
.BR LINKTYPE_ .
.PP
The link-layer header types supported by libpcap are listed here.  The
value corresponding to
.B LINKTYPE_
names are given; the value corresponding to
.B DLT_
values are, in some cases, platform dependent, and are not given;
applications should check for particular
.B DLT_
values by name.
.RS 5
.TP 5
.BR DLT_NULL "; " LINKTYPE_NULL = 0
BSD loopback encapsulation; the link layer header is a 4-byte field, in
.I host
byte order, containing a PF_ value from
.B socket.h
for the network-layer protocol of the packet.
.IP
Note that ``host byte order'' is the byte order of the machine on which
the packets are captured, and the PF_ values are for the OS of the
machine on which the packets are captured; if a live capture is being
done, ``host byte order'' is the byte order of the machine capturing the
packets, and the PF_ values are those of the OS of the machine capturing
the packets, but if a ``savefile'' is being read, the byte order and PF_
values are
.I not
necessarily those of the machine reading the capture file.
.TP 5
.BR DLT_EN10MB "; " LINKTYPE_ETHERNET = 1
Ethernet (10Mb, 100Mb, 1000Mb, and up); the
.B 10MB
in the
.B DLT_
name is historical.
.TP 5
.BR DLT_IEEE802 "; " LINKTYPE_TOKEN_RING = 6
IEEE 802.5 Token Ring; the
.B IEEE802
in the
.B DLT_
name is historical.
.TP 5
.BR DLT_ARCNET "; " LINKTYPE_ARCNET = 7
ARCNET
.TP 5
.BR DLT_SLIP "; " LINKTYPE_SLIP = 8
SLIP; the link layer header contains, in order:
.RS 10
.LP
a 1-byte flag, which is 0 for packets received by the machine and 1 for
packets sent by the machine;
.LP
a 1-byte field, the upper 4 bits of which indicate the type of packet,
as per RFC 1144:
.RS 5
.TP 5
0x40
an unmodified IP datagram (TYPE_IP);
.TP 5
0x70
an uncompressed-TCP IP datagram (UNCOMPRESSED_TCP), with that byte being
the first byte of the raw IP header on the wire, containing the
connection number in the protocol field;
.TP 5
0x80
a compressed-TCP IP datagram (COMPRESSED_TCP), with that byte being the
first byte of the compressed TCP/IP datagram header;
.RE
.LP
for UNCOMPRESSED_TCP, the rest of the modified IP header, and for
COMPRESSED_TCP, the compressed TCP/IP datagram header;
.RE
.RS 5
.LP
for a total of 16 bytes; the uncompressed IP datagram follows the header.
.RE
.TP 5
.BR DLT_PPP "; " LINKTYPE_PPP = 9
PPP; if the first 2 bytes are 0xff and 0x03, it's PPP in HDLC-like
framing, with the PPP header following those two bytes, otherwise it's
PPP without framing, and the packet begins with the PPP header.
.TP 5
.BR DLT_FDDI "; " LINKTYPE_FDDI = 10
FDDI
.TP 5
.BR DLT_ATM_RFC1483 "; " LINKTYPE_ATM_RFC1483 = 100
RFC 1483 LLC/SNAP-encapsulated ATM; the packet begins with an IEEE 802.2
LLC header.
.TP 5
.BR DLT_RAW "; " LINKTYPE_RAW = 101
raw IP; the packet begins with an IP header.
.TP 5
.BR DLT_PPP_SERIAL "; " LINKTYPE_PPP_HDLC = 50
PPP in HDLC-like framing, as per RFC 1662, or Cisco PPP with HDLC
framing, as per section 4.3.1 of RFC 1547; the first byte will be 0xFF
for PPP in HDLC-like framing, and will be 0x0F or 0x8F for Cisco PPP
with HDLC framing.
.TP 5
.BR DLT_PPP_ETHER "; " LINKTYPE_PPP_ETHER = 51
PPPoE; the packet begins with a PPPoE header, as per RFC 2516.
.TP 5
.BR DLT_C_HDLC "; " LINKTYPE_C_HDLC = 104
Cisco PPP with HDLC framing, as per section 4.3.1 of RFC 1547.
.TP 5
.BR DLT_IEEE802_11 "; " LINKTYPE_IEEE802_11 = 105
IEEE 802.11 wireless LAN
.TP 5
.BR DLT_FRELAY "; " LINKTYPE_FRELAY = 107
Frame Relay
.TP 5
.BR DLT_LOOP "; " LINKTYPE_LOOP = 108
OpenBSD loopback encapsulation; the link layer header is a 4-byte field, in
.I network
byte order, containing a PF_ value from OpenBSD's
.B socket.h
for the network-layer protocol of the packet.
.IP
Note that, if a ``savefile'' is being read, those PF_ values are
.I not
necessarily those of the machine reading the capture file.
.TP 5
.BR DLT_LINUX_SLL "; " LINKTYPE_LINUX_SLL = 113
Linux "cooked" capture encapsulation; the link layer header contains, in
order:
.RS 10
.LP
a 2-byte "packet type", in network byte order, which is one of:
.RS 5
.TP 5
0
packet was sent to us by somebody else
.TP 5
1
packet was broadcast by somebody else
.TP 5
2
packet was multicast, but not broadcast, by somebody else
.TP 5
3
packet was sent by somebody else to somebody else
.TP 5
4
packet was sent by us
.RE
.LP
a 2-byte field, in network byte order, containing a Linux ARPHRD_ value
for the link layer device type;
.LP
a 2-byte field, in network byte order, containing the length of the
link layer address of the sender of the packet (which could be 0);
.LP
an 8-byte field containing that number of bytes of the link layer header
(if there are more than 8 bytes, only the first 8 are present);
.LP
a 2-byte field containing an Ethernet protocol type, in network byte
order, or containing 1 for Novell 802.3 frames without an 802.2 LLC
header or 4 for frames beginning with an 802.2 LLC header.
.RE
.TP 5
.BR DLT_LTALK "; " LINKTYPE_LTALK = 104
Apple LocalTalk; the packet begins with an AppleTalk LLAP header.
.TP 5
.BR DLT_PFLOG "; " LINKTYPE_PFLOG = 117
OpenBSD pflog; the link layer header contains a
.B "struct pfloghdr"
structure, as defined by the host on which the file was saved.  (This
differs from operating system to operating system and release to
release; there is nothing in the file to indicate what the layout of
that structure is.)
.TP 5
.BR DLT_PRISM_HEADER "; " LINKTYPE_PRISM_HEADER = 119
Prism monitor mode information followed by an 802.11 header.
.TP 5
.BR DLT_IP_OVER_FC "; " LINKTYPE_IP_OVER_FC = 122
RFC 2625 IP-over-Fibre Channel, with the link-layer header being the
Network_Header as described in that RFC.
.TP 5
.BR DLT_SUNATM "; " LINKTYPE_SUNATM = 123
SunATM devices; the link layer header contains, in order:
.RS 10
.LP
a 1-byte flag field, containing a direction flag in the uppermost bit,
which is set for packets transmitted by the machine and clear for
packets received by the machine, and a 4-byte traffic type in the
low-order 4 bits, which is one of:
.RS 5
.TP 5
0
raw traffic
.TP 5
1
LANE traffic
.TP 5
2
LLC-encapsulated traffic
.TP 5
3
MARS traffic
.TP 5
4
IFMP traffic
.TP 5
5
ILMI traffic
.TP 5
6
Q.2931 traffic
.RE
.LP
a 1-byte VPI value;
.LP
a 2-byte VCI field, in network byte order.
.RE
.TP 5
.BR DLT_IEEE802_11_RADIO "; " LINKTYPE_IEEE802_11_RADIO = 127
link-layer information followed by an 802.11 header - see
http://www.shaftnet.org/~pizza/software/capturefrm.txt for a description
of the link-layer information.
.TP 5
.BR DLT_ARCNET_LINUX "; " LINKTYPE_ARCNET_LINUX = 129
ARCNET, with no exception frames, reassembled packets rather than raw
frames, and an extra 16-bit offset field between the destination host
and type bytes.
.TP 5
.BR DLT_LINUX_IRDA "; " LINKTYPE_LINUX_IRDA = 144
Linux-IrDA packets, with a
.B DLT_LINUX_SLL
header followed by the IrLAP header.
.TP 5
.BR DLT_LINUX_LAPD "; " LINKTYPE_LINUX_LAPD = 177
LAPD (Q.921) frames, with a
.B DLT_LINUX_SLL
header captured via vISDN.
.RE
.SH SEE ALSO
pcap_datalink(3PCAP)