# $FreeBSD: src/etc/devd.conf,v 1.42 2008/06/27 12:04:36 rpaulo Exp $
# $DragonFly: src/etc/devd.conf,v 1.1 2008/10/03 00:26:20 hasso Exp $
#
# Refer to devd.conf(5) and devd(8) man pages for the details on how to
# run and configure devd.
#

# NB: All regular expressions have an implicit ^$ around them.
# NB: device-name is shorthand for 'match device-name'

options {
	# Each directory directive adds a directory the list of directories
	# that we scan for files.  Files are read-in in the order that they
	# are returned from readdir(3).  The rule-sets are combined to
	# create a DFA that's used to match events to actions.
	directory "/etc/devd";
	directory "/usr/local/etc/devd";

	# Setup some shorthand for regex that we use later in the file.
	#XXX Yes, these are gross -- imp
	set scsi-controller-regex
		"(aac|adv|adw|aha|ahb|ahc|ahd|aic|amd|amr|asr|bt|ciss|ct|dpt|\
		esp|ida|iir|ips|isp|mlx|mly|mpt|ncr|ncv|nsp|stg|sym|trm|wds)\
		[0-9]+";
};

# Note that the attach/detach with the highest value wins, so that one can
# override these general rules.

#
# Configure the interface on attach.  Due to a historical accident, this
# script is called pccard_ether.
#
# notify 0 {
#	match "system"		"IFNET";
#	match "type"		"ATTACH";
#	action "/etc/pccard_ether $subsystem start";
# };
#
# notify 0 {
#	match "system"		"IFNET";
#	match "type"		"DETACH";
#	action "/etc/pccard_ether $subsystem stop";
# };

#
# Try to start dhclient on Ethernet like interfaces when the link comes
# up.  Only devices that are configured to support DHCP will actually
# run it.  No link down rule exists because dhclient automaticly exits
# when the link goes down.
#
# notify 0 {
#	match "system"		"IFNET";
#	match "type"		"LINK_UP";
#	media-type		"ethernet";
#	action "/etc/rc.d/dhclient start $subsystem";
# };

#
# Like Ethernet devices, but separate because
# they have a different media type.  We may want
# to exploit this later.
#
# detach 0 {
#	media-type "802.11";
#	action "/etc/pccard_ether $device-name stop";
# };
# attach 0 {
#	media-type "802.11";
#	action "/etc/pccard_ether $device-name start";
# };
# notify 0 {
#	match "system"		"IFNET";
#	match "type"		"LINK_UP";
#	media-type		"802.11";
#	action "/etc/rc.d/dhclient start $subsystem";
# };

#
# An entry like this might be in a different file, but is included here
# as an example of how to override things.  Normally 'ed50' would match
# the above attach/detach stuff, but the value of 100 makes it
# hard wired to 1.2.3.4.
# attach 100 {
#	device-name "ed50";
#	action "ifconfig $device-name inet 1.2.3.4 netmask 0xffff0000";
# };
# detach 100 {
#	device-name "ed50";
# };

#
# When a USB Bluetooth dongle appears activate it.
# XXX FIX for DragonFly XXX
# attach 100 {
#	device-name "ubt[0-9]+";
#	action "/etc/rc.d/bluetooth start $device-name";
# };
# detach 100 {
#	device-name "ubt[0-9]+";
#	action "/etc/rc.d/bluetooth stop $device-name";
# };

#
# When a USB keyboard arrives, attach it as the console keyboard.
# XXX Fix for DragonFly XXX
# attach 100 {
#	device-name "ukbd0";
#	action "/etc/rc.d/syscons setkeyboard /dev/ukbd0";
# };
# detach 100 {
#	device-name "ukbd0";
#	action "/etc/rc.d/syscons setkeyboard /dev/kbd0";
# };
#
# attach 100 {
#	device-name "ums[0-9]+";
#	action "/etc/rc.d/moused start $device-name";
# };
#
# detach 100 { 
#	device-name "ums[0-9]+"; 
#	action "/etc/rc.d/moused stop $device-name"; 
# }; 

#
# Rescan scsi device-names on attach, but not detach.  However, it is
# disabled by default due to reports of problems.
#
# attach 0 {
#	device-name "$scsi-controller-regex";
#	action "camcontrol rescan all";
# };
#
# Don't even try to second guess what to do about drivers that don't
# match here.  Instead, pass it off to syslog.  Commented out for the
# moment, as the pnpinfo variable isn't set in devd yet.  Individual
# variables within the bus supplied pnpinfo are set.
# nomatch 0 {
#	action "logger Unknown device: $pnpinfo $location $bus";
#};

#
# Various logging of unknown devices.
# nomatch 10 {
#	match "bus" "uhub[0-9]+";
#	action "logger Unknown USB device: vendor $vendor product $product \
#		bus $bus";
# };

#
# Some PC-CARDs don't offer numerical manufacturer/product IDs, just
# show the CIS info there.
# nomatch 20 {
#	match "bus" "pccard[0-9]+";
#	match "manufacturer" "0xffffffff";
#	match "product" "0xffffffff";
#	action "logger Unknown PCCARD device: CISproduct $cisproduct \
#		CIS-vendor $cisvendor bus $bus";
# };
#
# nomatch 10 {
#	match "bus" "pccard[0-9]+";
#	action "logger Unknown PCCARD device: manufacturer $manufacturer \
#		product $product CISproduct $cisproduct CIS-vendor \
#		$cisvendor bus $bus";
# };
#
# nomatch 10 {
#	match "bus" "cardbus[0-9]+";
#	action "logger Unknown Cardbus device: device $device class $class \
#		vendor $vendor bus $bus";
# };

#
# Switch power profiles when the AC line state changes.
# notify 10 {
#	match "system"		"ACPI";
#	match "subsystem"	"ACAD";
#	action "/etc/rc.d/power_profile $notify";
# };

#
# Notify all users before beginning emergency shutdown when we get
# a _CRT or _HOT thermal event and we're going to power down the system
# very soon.
# notify 10 {
#	match "system"		"ACPI";
#	match "subsystem"	"Thermal";
#	match "notify"		"0xcc";
#	action "logger -p kern.emerg \
#		'WARNING: system temperature too high, shutting down soon!'";
#};

#
# User requested suspend, so perform preparation steps and then execute
# the actual suspend process.
# notify 10 {
#	match "system"		"ACPI";
#	match "subsystem"	"Suspend";
#	action "/etc/rc.suspend acpi $notify";
# };
# notify 10 {
#	match "system"		"ACPI";
#	match "subsystem"	"Resume";
#	action "/etc/rc.resume acpi $notify";
# };

#
# The next blocks enable volume hotkeys that can be found on the Asus EeePC
# XXX ASUS-Eee subsystem isn't available in DragonFly
# notify 0 {
#	match "system"		"ACPI";
#	match "subsystem"       "ASUS-Eee";
#	match "notify"		"0x13";
#	action			"mixer 0";
# };
#
# notify 0 {
#	match "system"		"ACPI";
#	match "subsystem"       "ASUS-Eee";
#	match "notify"		"0x14";
#	action			"mixer vol -10";
# };
#
# notify 0 {
#	match "system"		"ACPI";
#	match "subsystem"       "ASUS-Eee";
#	match "notify"		"0x15";
#	action			"mixer vol +10";
# };

# 
# The following might be an example of something that a vendor might
# install if you were to add their device.  This might reside in
# /usr/local/etc/devd/deqna.conf.  A deqna is, in this hypothetical
# example, a pccard ethernet-like device.  Students of history may
# know other devices by this name, and will get the in-jokes in this
# entry.
# nomatch 10 {
#	match "bus" "pccard[0-9]+";
#	match "manufacturer" "0x1234";
#	match "product" "0x2323";
#	action "kldload if_deqna";
# };
# attach 10 {
#	device-name "deqna[0-9]+";
#	action "/etc/pccard_ether $device-name start";
# };
# detach 10 {
#	device-name "deqna[0-9]+";
#	action "/etc/pccard_ether $device-name stop";
# };

#
# Examples of notify hooks.  A notify is a generic way for a kernel
# subsystem to send event notification to userland.
#
# Here are some examples of ACPI notify handlers.  ACPI subsystems that
# generate notifies include the AC adapter, power/sleep buttons,
# control method batteries, lid switch, and thermal zones.
#
# Information returned is not always the same as the ACPI notify
# events.  See the ACPI specification for more information about
# notifies.  Here is the information returned for each subsystem:
#
# ACAD:		AC line state (0 is offline, 1 is online)
# Button:	Button pressed (0 for power, 1 for sleep)
# CMBAT:	ACPI battery events
# Lid:		Lid state (0 is closed, 1 is open)
# Suspend, Resume: Suspend and resume notification
# Thermal:	ACPI thermal zone events
#
# This example calls a script when the AC state changes, passing the
# notify value as the first argument.  If the state is 0x00, it might
# call some sysctls to implement economy mode.  If 0x01, it might set
# the mode to performance.
# notify 10 {
#	match "system"		"ACPI";
#	match "subsystem"	"ACAD";
#	action			"/etc/acpi_ac $notify";
# };