Remove some EISA remains in a couple of manual pages.

diff --git a/share/man/man4/adv.4 b/share/man/man4/adv.4
index 99510ca..f53c75f 100644 (file)
--- a/share/man/man4/adv.4
+++ b/share/man/man4/adv.4
@@ -28,16 +28,12 @@
 .Os
 .Sh NAME
 .Nm adv
-.Nd Advansys ISA/VL/EISA/PCI 8bit SCSI Host adapter driver
+.Nd Advansys ISA/VL/PCI 8bit SCSI Host adapter driver
 .Sh SYNOPSIS
 For one or more ISA or VL cards:
 .Cd device isa
 .Cd device "adv0 at isa? port ? irq ? drq ?"
 .Pp
-For one or more EISA cards:
-.Cd device eisa
-.Cd device adv
-.Pp
 For one or more PCI cards:
 .Cd device pci
 .Cd device adv
@@ -101,7 +97,6 @@ Single Channel Products:
 .Bl -column "ABP510/5150 " "ISA PnP " "Floppy " "MaxSync " "Commands "
 .It Em Adapter Ta Em Bus Ta Em Floppy Ta Em MaxSync Ta Em Commands
 .It ABP542 Ta ISA Ta Yes Ta 10MHz Ta 240
-.It ABP742 Ta EISA Ta Yes Ta 10MHz Ta 240
 .It ABP842 Ta VL Ta Yes Ta 10MHz Ta 240
 .It ABP940 Ta PCI Ta \&No Ta 10MHz Ta 240
 .It ABP[3]940UA Ta PCI Ta \&No Ta 20MHz Ta 240
@@ -115,7 +110,6 @@ Single Channel Products:
 Multi Channel Products (Commands are per-channel):
 .Bl -column "ABP510/5150 " "ISA PnP " "Floppy " "MaxSync " "Commands " "Channels "
 .It Em Adapter Ta Em Bus Ta Em Floppy Ta Em MaxSync Ta Em Commands Ta Em Channels
-.It ABP752 Ta EISA Ta Yes Ta 10MHz Ta 240 Ta 2
 .It ABP852 Ta VL Ta Yes Ta 10MHz Ta 240 Ta 2
 .It ABP950 Ta PCI Ta \&No Ta 10MHz Ta 240 Ta 2
 .It ABP980 Ta PCI Ta \&No Ta 10MHz Ta 240 Ta 4

diff --git a/share/man/man4/de.4 b/share/man/man4/de.4
index 18407b7..2467be7 100644 (file)
--- a/share/man/man4/de.4
+++ b/share/man/man4/de.4
@@ -24,7 +24,6 @@
 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 .\"
 .\" $FreeBSD: src/share/man/man4/de.4,v 1.9.2.4 2001/08/17 13:08:37 ru Exp $
-.\" $DragonFly: src/share/man/man4/de.4,v 1.4 2008/05/02 02:05:05 swildner Exp $
 .\"
 .Dd January 19, 1997
 .Dt DE 4
@@ -40,7 +39,7 @@ The
 driver provides support for the Ethernet adapters based on the Digital
 Equipment DC21x4x based self-contained Ethernet chips.
 .Pp
-It supports the DEC PCI DE435 card, DEC EISA DE425, DEC DE450, DEC DE500,
+It supports the DEC PCI DE435 card, DEC DE450, DEC DE500,
 SMC 8432, 9332 and 9334, Cogent EM100FX and EM440TX, Asante,
 ZNYX ZX3xx, and others based on the 21040 and 21041 Ethernet controllers or
 the 21140[A], 21141, 21142 and 21143 Fast 100Mbps Ethernet controllers.
@@ -101,9 +100,6 @@ devices allowed in a single machine.
 .It "de%d: not configured; 21140 pass 1.1 required (%d.%d found)"
 Certain revisions of the chipset are not supported by this driver.
 .El
-.Sh CAVEATS
-Since the 21040 is available on both EISA and PCI boards, one must be careful
-in how defines the 21040 in the kernel config file.
 .Sh SEE ALSO
 .Xr arp 4 ,
 .Xr ifmedia 4 ,

diff --git a/share/man/man4/si.4 b/share/man/man4/si.4
index 47c566b..ab82fe9 100644 (file)
--- a/share/man/man4/si.4
+++ b/share/man/man4/si.4
@@ -12,11 +12,11 @@
 The Specialix SI/XIO and SX hardware makes up an 8 to 32 port RS-232 serial
 multiplexor.
 .Pp
-The first instance of the device lines above is for EISA and PCI host cards,
+The first instance of the device lines above is for PCI host cards,
 the second is for ISA host cards.
 .Pp
 The system uses two components:  A "Host adapter", which is plugged into
-an ISA, EISA or PCI slot and provides intelligence and buffering/processing
+an ISA or PCI slot and provides intelligence and buffering/processing
 capabilities, as well as an external bus in the form of a 37 pin cable.
 .Pp
 On this cable, "modules" are connected.  The "SI" module comes in a 4 and 8
@@ -153,7 +153,7 @@ and threw the man page together.
 .An Bruce Evans Aq bde@zeta.org.au
 provided a large amount of assistance during porting.
 .An Nick Sayer Aq nick@specialix.com
-wrote the EISA, PCI and SX portions.
+wrote the PCI and SX portions.
 .Sh BUGS
 The interrupt tuning rate is not believed to be optimal at this time for
 maximum efficiency.