MFC numerous features from HEAD.
[dragonfly.git] / etc / modems
CommitLineData
984263bc
MD
1#
2# $FreeBSD: src/etc/modems,v 1.4 1999/08/27 23:23:42 peter Exp $
1de703da 3# $DragonFly: src/etc/modems,v 1.2 2003/06/17 04:24:45 dillon Exp $
984263bc
MD
4# @(#)modems 3/24/95
5#
6# modems -- modem configuration data base file
7# see tip(1), modems(5)
8#
9# dial_command AT command to dial up remote
10# echo_off_command AT command to turn off command echo
11# escape_guard_time Shroud escape sequence with specified delay (ms)
12# escape_sequence Return to command escape sequence
13# hangup_command AT command to hangup modem
14# hw_flow_control Enable RTS/CTS flow control between DTE/DCE
15# intercharacter_delay Delay between characters sent to modem when issuing
16# commands
17# intercommand_delay Minimum delay between commands to modem
18# init_string AT command to initialize modem before dialing out
19# lock_baud Use fixed DTE / DCE bit rate
20# reset_delay Delay required by modem for reset
21#
22
23sportster|st|US Robotics Sportster 14.4K:dial_command=ATDT%s\r:hangup_command=ATH\r:\
24 :echo_off_command=ATE0\r:reset_command=AT&F1\r:\
25 :init_string=AT&B1&H1&R2&C1&D2\r:\
26 :escape_sequence=+++:hw_flow_control:lock_baud:intercharacter_delay#50:\
27 :intercommand_delay#250:escape_guard_time#500:reset_delay#2000:
28
29mt932|multitech|mt|Multitech 932:dial_command=ATDT%s\r:hangup_command=ATH\r:\
30 :echo_off_command=ATE0\r:reset_command=ATZ\r:\
31 :init_string=AT$BA0$SB38400&E1&E4&E13&E15Q0V1X4E0S0=0\r:\
32 :escape_sequence=+++:hw_flow_control:lock_baud:intercharacter_delay#50:\
33 :intercommand_delay#250:escape_guard_time#500:reset_delay#2000:
34
35generic|Generic AT command modem (use defaults):