Remove some unneeded semicolons across the tree.
[dragonfly.git] / usr.sbin / ppp / radius.c
1 /*
2  * Copyright 1999 Internet Business Solutions Ltd., Switzerland
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  *
26  * $FreeBSD: src/usr.sbin/ppp/radius.c,v 1.11.2.5 2002/09/01 02:12:32 brian Exp $
27  */
28
29 #include <sys/param.h>
30
31 #include <sys/socket.h>
32 #include <netinet/in_systm.h>
33 #include <netinet/in.h>
34 #include <netinet/ip.h>
35 #include <arpa/inet.h>
36 #include <sys/un.h>
37 #include <net/route.h>
38
39 #ifdef LOCALRAD
40 #include "radlib.h"
41 #include "radlib_vs.h"
42 #else
43 #include <radlib.h>
44 #include <radlib_vs.h>
45 #endif
46
47 #include <errno.h>
48 #ifndef NODES
49 #include <md5.h>
50 #endif
51 #include <stdarg.h>
52 #include <stdio.h>
53 #include <stdlib.h>
54 #include <string.h>
55 #include <sys/time.h>
56 #include <termios.h>
57 #include <unistd.h>
58 #include <netdb.h>
59
60 #include "layer.h"
61 #include "defs.h"
62 #include "log.h"
63 #include "descriptor.h"
64 #include "prompt.h"
65 #include "timer.h"
66 #include "fsm.h"
67 #include "iplist.h"
68 #include "slcompress.h"
69 #include "throughput.h"
70 #include "lqr.h"
71 #include "hdlc.h"
72 #include "mbuf.h"
73 #include "ncpaddr.h"
74 #include "ip.h"
75 #include "ipcp.h"
76 #include "ipv6cp.h"
77 #include "route.h"
78 #include "command.h"
79 #include "filter.h"
80 #include "lcp.h"
81 #include "ccp.h"
82 #include "link.h"
83 #include "mp.h"
84 #include "radius.h"
85 #include "auth.h"
86 #include "async.h"
87 #include "physical.h"
88 #include "chat.h"
89 #include "cbcp.h"
90 #include "chap.h"
91 #include "datalink.h"
92 #include "ncp.h"
93 #include "bundle.h"
94 #include "proto.h"
95
96 #ifndef NODES
97 struct mschap_response {
98   u_char ident;
99   u_char flags;
100   u_char lm_response[24];
101   u_char nt_response[24];
102 };
103
104 struct mschap2_response {
105   u_char ident;
106   u_char flags;
107   u_char pchallenge[16];
108   u_char reserved[8];
109   u_char response[24];
110 };
111
112 #define AUTH_LEN        16
113 #define SALT_LEN        2
114 #endif
115
116 static const char *
117 radius_policyname(int policy)
118 {
119   switch(policy) {
120   case MPPE_POLICY_ALLOWED:
121     return "Allowed";
122   case MPPE_POLICY_REQUIRED:
123     return "Required";
124   }
125   return NumStr(policy, NULL, 0);
126 }
127
128 static const char *
129 radius_typesname(int types)
130 {
131   switch(types) {
132   case MPPE_TYPE_40BIT:
133     return "40 bit";
134   case MPPE_TYPE_128BIT:
135     return "128 bit";
136   case MPPE_TYPE_40BIT|MPPE_TYPE_128BIT:
137     return "40 or 128 bit";
138   }
139   return NumStr(types, NULL, 0);
140 }
141
142 #ifndef NODES
143 static void
144 demangle(struct radius *r, const void *mangled, size_t mlen,
145          char **buf, size_t *len)
146 {
147   char R[AUTH_LEN];             /* variable names as per rfc2548 */
148   const char *S;
149   u_char b[16];
150   const u_char *A, *C;
151   MD5_CTX Context;
152   int Slen, i, Clen, Ppos;
153   u_char *P;
154
155   if (mlen % 16 != SALT_LEN) {
156     log_Printf(LogWARN, "Cannot interpret mangled data of length %ld\n",
157                (u_long)mlen);
158     *buf = NULL;
159     *len = 0;
160     return;
161   }
162
163   /* We need the RADIUS Request-Authenticator */
164   if (rad_request_authenticator(r->cx.rad, R, sizeof R) != AUTH_LEN) {
165     log_Printf(LogWARN, "Cannot obtain the RADIUS request authenticator\n");
166     *buf = NULL;
167     *len = 0;
168     return;
169   }
170
171   A = (const u_char *)mangled;                  /* Salt comes first */
172   C = (const u_char *)mangled + SALT_LEN;       /* Then the ciphertext */
173   Clen = mlen - SALT_LEN;
174   S = rad_server_secret(r->cx.rad);             /* We need the RADIUS secret */
175   Slen = strlen(S);
176   P = alloca(Clen);                             /* We derive our plaintext */
177
178   MD5Init(&Context);
179   MD5Update(&Context, S, Slen);
180   MD5Update(&Context, R, AUTH_LEN);
181   MD5Update(&Context, A, SALT_LEN);
182   MD5Final(b, &Context);
183   Ppos = 0;
184
185   while (Clen) {
186     Clen -= 16;
187
188     for (i = 0; i < 16; i++)
189       P[Ppos++] = C[i] ^ b[i];
190
191     if (Clen) {
192       MD5Init(&Context);
193       MD5Update(&Context, S, Slen);
194       MD5Update(&Context, C, 16);
195       MD5Final(b, &Context);
196     }
197
198     C += 16;
199   }
200
201   /*
202    * The resulting plain text consists of a one-byte length, the text and
203    * maybe some padding.
204    */
205   *len = *P;
206   if (*len > mlen - 1) {
207     log_Printf(LogWARN, "Mangled data seems to be garbage\n");
208     *buf = NULL;
209     *len = 0;
210     return;
211   }
212
213   *buf = malloc(*len);
214   memcpy(*buf, P + 1, *len);
215 }
216 #endif
217
218 /*
219  * rad_continue_send_request() has given us `got' (non-zero).  Deal with it.
220  */
221 static void
222 radius_Process(struct radius *r, int got)
223 {
224   char *argv[MAXARGS], *nuke;
225   struct bundle *bundle;
226   int argc, addrs, res, width;
227   size_t len;
228   struct ncprange dest;
229   struct ncpaddr gw;
230   const void *data;
231   const char *stype;
232   u_int32_t ipaddr, vendor;
233   struct in_addr ip;
234
235   r->cx.fd = -1;                /* Stop select()ing */
236   stype = r->cx.auth ? "auth" : "acct";
237
238   switch (got) {
239     case RAD_ACCESS_ACCEPT:
240       log_Printf(LogPHASE, "Radius(%s): ACCEPT received\n", stype);
241       if (!r->cx.auth) {
242         rad_close(r->cx.rad);
243         return;
244       }
245       break;
246
247     case RAD_ACCESS_REJECT:
248       log_Printf(LogPHASE, "Radius(%s): REJECT received\n", stype);
249       if (!r->cx.auth) {
250         rad_close(r->cx.rad);
251         return;
252       }
253       break;
254
255     case RAD_ACCESS_CHALLENGE:
256       /* we can't deal with this (for now) ! */
257       log_Printf(LogPHASE, "Radius: CHALLENGE received (can't handle yet)\n");
258       if (r->cx.auth)
259         auth_Failure(r->cx.auth);
260       rad_close(r->cx.rad);
261       return;
262
263     case RAD_ACCOUNTING_RESPONSE:
264       log_Printf(LogPHASE, "Radius(%s): Accounting response received\n", stype);
265       if (r->cx.auth)
266         auth_Failure(r->cx.auth);               /* unexpected !!! */
267
268       /* No further processing for accounting requests, please */
269       rad_close(r->cx.rad);
270       return;
271
272     case -1:
273       log_Printf(LogPHASE, "radius(%s): %s\n", stype, rad_strerror(r->cx.rad));
274       if (r->cx.auth)
275         auth_Failure(r->cx.auth);
276       rad_close(r->cx.rad);
277       return;
278
279     default:
280       log_Printf(LogERROR, "rad_send_request(%s): Failed %d: %s\n", stype,
281                  got, rad_strerror(r->cx.rad));
282       if (r->cx.auth)
283         auth_Failure(r->cx.auth);
284       rad_close(r->cx.rad);
285       return;
286   }
287
288   /* Let's see what we've got in our reply */
289   r->ip.s_addr = r->mask.s_addr = INADDR_NONE;
290   r->mtu = 0;
291   r->vj = 0;
292   while ((res = rad_get_attr(r->cx.rad, &data, &len)) > 0) {
293     switch (res) {
294       case RAD_FRAMED_IP_ADDRESS:
295         r->ip = rad_cvt_addr(data);
296         log_Printf(LogPHASE, " IP %s\n", inet_ntoa(r->ip));
297         break;
298
299       case RAD_FILTER_ID:
300         free(r->filterid);
301         if ((r->filterid = rad_cvt_string(data, len)) == NULL) {
302           log_Printf(LogERROR, "rad_cvt_string: %s\n", rad_strerror(r->cx.rad));
303           auth_Failure(r->cx.auth);
304           rad_close(r->cx.rad);
305           return;
306         }
307         log_Printf(LogPHASE, " Filter \"%s\"\n", r->filterid);
308         break;
309
310       case RAD_SESSION_TIMEOUT:
311         r->sessiontime = rad_cvt_int(data);
312         log_Printf(LogPHASE, " Session-Timeout %lu\n", r->sessiontime);
313         break;
314
315       case RAD_FRAMED_IP_NETMASK:
316         r->mask = rad_cvt_addr(data);
317         log_Printf(LogPHASE, " Netmask %s\n", inet_ntoa(r->mask));
318         break;
319
320       case RAD_FRAMED_MTU:
321         r->mtu = rad_cvt_int(data);
322         log_Printf(LogPHASE, " MTU %lu\n", r->mtu);
323         break;
324
325       case RAD_FRAMED_ROUTING:
326         /* Disabled for now - should we automatically set up some filters ? */
327         /* rad_cvt_int(data); */
328         /* bit 1 = Send routing packets */
329         /* bit 2 = Receive routing packets */
330         break;
331
332       case RAD_FRAMED_COMPRESSION:
333         r->vj = rad_cvt_int(data) == 1 ? 1 : 0;
334         log_Printf(LogPHASE, " VJ %sabled\n", r->vj ? "en" : "dis");
335         break;
336
337       case RAD_FRAMED_ROUTE:
338         /*
339          * We expect a string of the format ``dest[/bits] gw [metrics]''
340          * Any specified metrics are ignored.  MYADDR and HISADDR are
341          * understood for ``dest'' and ``gw'' and ``0.0.0.0'' is the same
342          * as ``HISADDR''.
343          */
344
345         if ((nuke = rad_cvt_string(data, len)) == NULL) {
346           log_Printf(LogERROR, "rad_cvt_string: %s\n", rad_strerror(r->cx.rad));
347           auth_Failure(r->cx.auth);
348           rad_close(r->cx.rad);
349           return;
350         }
351
352         log_Printf(LogPHASE, " Route: %s\n", nuke);
353         bundle = r->cx.auth->physical->dl->bundle;
354         ip.s_addr = INADDR_ANY;
355         ncprange_setip4host(&dest, ip);
356         argc = command_Interpret(nuke, strlen(nuke), argv);
357         if (argc < 0)
358           log_Printf(LogWARN, "radius: %s: Syntax error\n",
359                      argc == 1 ? argv[0] : "\"\"");
360         else if (argc < 2)
361           log_Printf(LogWARN, "radius: %s: Invalid route\n",
362                      argc == 1 ? argv[0] : "\"\"");
363         else if ((strcasecmp(argv[0], "default") != 0 &&
364                   !ncprange_aton(&dest, &bundle->ncp, argv[0])) ||
365                  !ncpaddr_aton(&gw, &bundle->ncp, argv[1]))
366           log_Printf(LogWARN, "radius: %s %s: Invalid route\n",
367                      argv[0], argv[1]);
368         else {
369           ncprange_getwidth(&dest, &width);
370           if (width == 32 && strchr(argv[0], '/') == NULL) {
371             /* No mask specified - use the natural mask */
372             ncprange_getip4addr(&dest, &ip);
373             ncprange_setip4mask(&dest, addr2mask(ip));
374           }
375           addrs = 0;
376
377           if (!strncasecmp(argv[0], "HISADDR", 7))
378             addrs = ROUTE_DSTHISADDR;
379           else if (!strncasecmp(argv[0], "MYADDR", 6))
380             addrs = ROUTE_DSTMYADDR;
381
382           if (ncpaddr_getip4addr(&gw, &ipaddr) && ipaddr == INADDR_ANY) {
383             addrs |= ROUTE_GWHISADDR;
384             ncpaddr_setip4(&gw, bundle->ncp.ipcp.peer_ip);
385           } else if (strcasecmp(argv[1], "HISADDR") == 0)
386             addrs |= ROUTE_GWHISADDR;
387
388           route_Add(&r->routes, addrs, &dest, &gw);
389         }
390         free(nuke);
391         break;
392
393       case RAD_REPLY_MESSAGE:
394         free(r->repstr);
395         if ((r->repstr = rad_cvt_string(data, len)) == NULL) {
396           log_Printf(LogERROR, "rad_cvt_string: %s\n", rad_strerror(r->cx.rad));
397           auth_Failure(r->cx.auth);
398           rad_close(r->cx.rad);
399           return;
400         }
401         log_Printf(LogPHASE, " Reply-Message \"%s\"\n", r->repstr);
402         break;
403
404       case RAD_VENDOR_SPECIFIC:
405         if ((res = rad_get_vendor_attr(&vendor, &data, &len)) <= 0) {
406           log_Printf(LogERROR, "rad_get_vendor_attr: %s (failing!)\n",
407                      rad_strerror(r->cx.rad));
408           auth_Failure(r->cx.auth);
409           rad_close(r->cx.rad);
410           return;
411         }
412
413         switch (vendor) {
414           case RAD_VENDOR_MICROSOFT:
415             switch (res) {
416 #ifndef NODES
417               case RAD_MICROSOFT_MS_CHAP_ERROR:
418                 free(r->errstr);
419                 if (len == 0)
420                   r->errstr = NULL;
421                 else {
422                   if (len < 3 || ((const char *)data)[1] != '=') {
423                     /*
424                      * Only point at the String field if we don't think the
425                      * peer has misformatted the response.
426                      */
427                     data = (const char *)data + 1;
428                     len--;
429                   } else
430                     log_Printf(LogWARN, "Warning: The MS-CHAP-Error "
431                                "attribute is mis-formatted.  Compensating\n");
432                   if ((r->errstr = rad_cvt_string((const char *)data,
433                                                   len)) == NULL) {
434                     log_Printf(LogERROR, "rad_cvt_string: %s\n",
435                                rad_strerror(r->cx.rad));
436                     auth_Failure(r->cx.auth);
437                     rad_close(r->cx.rad);
438                     return;
439                   }
440                   log_Printf(LogPHASE, " MS-CHAP-Error \"%s\"\n", r->errstr);
441                 }
442                 break;
443
444               case RAD_MICROSOFT_MS_CHAP2_SUCCESS:
445                 free(r->msrepstr);
446                 if (len == 0)
447                   r->msrepstr = NULL;
448                 else {
449                   if (len < 3 || ((const char *)data)[1] != '=') {
450                     /*
451                      * Only point at the String field if we don't think the
452                      * peer has misformatted the response.
453                      */
454                     data = (const char *)data + 1;
455                     len--;
456                   } else
457                     log_Printf(LogWARN, "Warning: The MS-CHAP2-Success "
458                                "attribute is mis-formatted.  Compensating\n");
459                   if ((r->msrepstr = rad_cvt_string((const char *)data,
460                                                     len)) == NULL) {
461                     log_Printf(LogERROR, "rad_cvt_string: %s\n",
462                                rad_strerror(r->cx.rad));
463                     auth_Failure(r->cx.auth);
464                     rad_close(r->cx.rad);
465                     return;
466                   }
467                   log_Printf(LogPHASE, " MS-CHAP2-Success \"%s\"\n",
468                              r->msrepstr);
469                 }
470                 break;
471
472               case RAD_MICROSOFT_MS_MPPE_ENCRYPTION_POLICY:
473                 r->mppe.policy = rad_cvt_int(data);
474                 log_Printf(LogPHASE, " MS-MPPE-Encryption-Policy %s\n",
475                            radius_policyname(r->mppe.policy));
476                 break;
477
478               case RAD_MICROSOFT_MS_MPPE_ENCRYPTION_TYPES:
479                 r->mppe.types = rad_cvt_int(data);
480                 log_Printf(LogPHASE, " MS-MPPE-Encryption-Types %s\n",
481                            radius_typesname(r->mppe.types));
482                 break;
483
484               case RAD_MICROSOFT_MS_MPPE_RECV_KEY:
485                 free(r->mppe.recvkey);
486                 demangle(r, data, len, &r->mppe.recvkey, &r->mppe.recvkeylen);
487                 log_Printf(LogPHASE, " MS-MPPE-Recv-Key ********\n");
488                 break;
489
490               case RAD_MICROSOFT_MS_MPPE_SEND_KEY:
491                 demangle(r, data, len, &r->mppe.sendkey, &r->mppe.sendkeylen);
492                 log_Printf(LogPHASE, " MS-MPPE-Send-Key ********\n");
493                 break;
494 #endif
495
496               default:
497                 log_Printf(LogDEBUG, "Dropping MICROSOFT vendor specific "
498                            "RADIUS attribute %d\n", res);
499                 break;
500             }
501             break;
502
503           default:
504             log_Printf(LogDEBUG, "Dropping vendor %lu RADIUS attribute %d\n",
505                        (unsigned long)vendor, res);
506             break;
507         }
508         break;
509
510       default:
511         log_Printf(LogDEBUG, "Dropping RADIUS attribute %d\n", res);
512         break;
513     }
514   }
515
516   if (res == -1) {
517     log_Printf(LogERROR, "rad_get_attr: %s (failing!)\n",
518                rad_strerror(r->cx.rad));
519     auth_Failure(r->cx.auth);
520   } else if (got == RAD_ACCESS_REJECT)
521     auth_Failure(r->cx.auth);
522   else {
523     r->valid = 1;
524     auth_Success(r->cx.auth);
525   }
526   rad_close(r->cx.rad);
527 }
528
529 /*
530  * We've either timed out or select()ed on the read descriptor
531  */
532 static void
533 radius_Continue(struct radius *r, int sel)
534 {
535   struct timeval tv;
536   int got;
537
538   timer_Stop(&r->cx.timer);
539   if ((got = rad_continue_send_request(r->cx.rad, sel, &r->cx.fd, &tv)) == 0) {
540     log_Printf(LogPHASE, "Radius: Request re-sent\n");
541     r->cx.timer.load = tv.tv_usec / TICKUNIT + tv.tv_sec * SECTICKS;
542     timer_Start(&r->cx.timer);
543     return;
544   }
545
546   radius_Process(r, got);
547 }
548
549 /*
550  * Time to call rad_continue_send_request() - timed out.
551  */
552 static void
553 radius_Timeout(void *v)
554 {
555   radius_Continue((struct radius *)v, 0);
556 }
557
558 /*
559  * Time to call rad_continue_send_request() - something to read.
560  */
561 static void
562 radius_Read(struct fdescriptor *d, struct bundle *bundle __unused, const fd_set *fdset __unused)
563 {
564   radius_Continue(descriptor2radius(d), 1);
565 }
566
567 /*
568  * Behave as a struct fdescriptor (descriptor.h)
569  */
570 static int
571 radius_UpdateSet(struct fdescriptor *d, fd_set *r, fd_set *w __unused, fd_set *e __unused, int *n)
572 {
573   struct radius *rad = descriptor2radius(d);
574
575   if (r && rad->cx.fd != -1) {
576     FD_SET(rad->cx.fd, r);
577     if (*n < rad->cx.fd + 1)
578       *n = rad->cx.fd + 1;
579     log_Printf(LogTIMER, "Radius: fdset(r) %d\n", rad->cx.fd);
580     return 1;
581   }
582
583   return 0;
584 }
585
586 /*
587  * Behave as a struct fdescriptor (descriptor.h)
588  */
589 static int
590 radius_IsSet(struct fdescriptor *d, const fd_set *fdset)
591 {
592   struct radius *r = descriptor2radius(d);
593
594   return r && r->cx.fd != -1 && FD_ISSET(r->cx.fd, fdset);
595 }
596
597 /*
598  * Behave as a struct fdescriptor (descriptor.h)
599  */
600 static int
601 radius_Write(struct fdescriptor *d __unused, struct bundle *bundle __unused, const fd_set *fdset __unused)
602 {
603   /* We never want to write here ! */
604   log_Printf(LogALERT, "radius_Write: Internal error: Bad call !\n");
605   return 0;
606 }
607
608 /*
609  * Initialise ourselves
610  */
611 void
612 radius_Init(struct radius *r)
613 {
614   r->desc.type = RADIUS_DESCRIPTOR;
615   r->desc.UpdateSet = radius_UpdateSet;
616   r->desc.IsSet = radius_IsSet;
617   r->desc.Read = radius_Read;
618   r->desc.Write = radius_Write;
619   r->cx.fd = -1;
620   r->cx.rad = NULL;
621   memset(&r->cx.timer, '\0', sizeof r->cx.timer);
622   r->cx.auth = NULL;
623   r->valid = 0;
624   r->vj = 0;
625   r->ip.s_addr = INADDR_ANY;
626   r->mask.s_addr = INADDR_NONE;
627   r->routes = NULL;
628   r->mtu = DEF_MTU;
629   r->msrepstr = NULL;
630   r->repstr = NULL;
631   r->errstr = NULL;
632   r->mppe.policy = 0;
633   r->mppe.types = 0;
634   r->mppe.recvkey = NULL;
635   r->mppe.recvkeylen = 0;
636   r->mppe.sendkey = NULL;
637   r->mppe.sendkeylen = 0;
638   *r->cfg.file = '\0';
639   log_Printf(LogDEBUG, "Radius: radius_Init\n");
640 }
641
642 /*
643  * Forget everything and go back to initialised state.
644  */
645 void
646 radius_Destroy(struct radius *r)
647 {
648   r->valid = 0;
649   log_Printf(LogDEBUG, "Radius: radius_Destroy\n");
650   timer_Stop(&r->cx.timer);
651   route_DeleteAll(&r->routes);
652   free(r->filterid);
653   r->filterid = NULL;
654   free(r->msrepstr);
655   r->msrepstr = NULL;
656   free(r->repstr);
657   r->repstr = NULL;
658   free(r->errstr);
659   r->errstr = NULL;
660   free(r->mppe.recvkey);
661   r->mppe.recvkey = NULL;
662   r->mppe.recvkeylen = 0;
663   free(r->mppe.sendkey);
664   r->mppe.sendkey = NULL;
665   r->mppe.sendkeylen = 0;
666   if (r->cx.fd != -1) {
667     r->cx.fd = -1;
668     rad_close(r->cx.rad);
669   }
670 }
671
672 static int
673 radius_put_physical_details(struct rad_handle *rad, struct physical *p)
674 {
675   int slot, type;
676
677   type = RAD_VIRTUAL;
678   if (p->handler)
679     switch (p->handler->type) {
680       case TTY_DEVICE:
681         type = RAD_ASYNC;
682         break;
683
684       case ETHER_DEVICE:
685         type = RAD_ETHERNET;
686         break;
687
688       case TCP_DEVICE:
689       case UDP_DEVICE:
690       case EXEC_DEVICE:
691       case ATM_DEVICE:
692       case NG_DEVICE:
693         type = RAD_VIRTUAL;
694         break;
695     }
696
697   if (rad_put_int(rad, RAD_NAS_PORT_TYPE, type) != 0) {
698     log_Printf(LogERROR, "rad_put: rad_put_int: %s\n", rad_strerror(rad));
699     rad_close(rad);
700     return 0;
701   }
702
703   if ((slot = physical_Slot(p)) >= 0)
704     if (rad_put_int(rad, RAD_NAS_PORT, slot) != 0) {
705       log_Printf(LogERROR, "rad_put: rad_put_int: %s\n", rad_strerror(rad));
706       rad_close(rad);
707       return 0;
708     }
709
710   return 1;
711 }
712
713 /*
714  * Start an authentication request to the RADIUS server.
715  */
716 int
717 radius_Authenticate(struct radius *r, struct authinfo *authp, const char *name,
718                     const char *key, int klen, const char *nchallenge,
719                     int nclen)
720 {
721   struct timeval tv;
722   int got;
723   char hostname[MAXHOSTNAMELEN];
724 #if 0
725   struct hostent *hp;
726   struct in_addr hostaddr;
727 #endif
728 #ifndef NODES
729   struct mschap_response msresp;
730   struct mschap2_response msresp2;
731   const struct MSCHAPv2_resp *keyv2;
732 #endif
733
734   if (!*r->cfg.file)
735     return 0;
736
737   if (r->cx.fd != -1)
738     /*
739      * We assume that our name/key/challenge is the same as last time,
740      * and just continue to wait for the RADIUS server(s).
741      */
742     return 1;
743
744   radius_Destroy(r);
745
746   if ((r->cx.rad = rad_auth_open()) == NULL) {
747     log_Printf(LogERROR, "rad_auth_open: %s\n", strerror(errno));
748     return 0;
749   }
750
751   if (rad_config(r->cx.rad, r->cfg.file) != 0) {
752     log_Printf(LogERROR, "rad_config: %s\n", rad_strerror(r->cx.rad));
753     rad_close(r->cx.rad);
754     return 0;
755   }
756
757   if (rad_create_request(r->cx.rad, RAD_ACCESS_REQUEST) != 0) {
758     log_Printf(LogERROR, "rad_create_request: %s\n", rad_strerror(r->cx.rad));
759     rad_close(r->cx.rad);
760     return 0;
761   }
762
763   if (rad_put_string(r->cx.rad, RAD_USER_NAME, name) != 0 ||
764       rad_put_int(r->cx.rad, RAD_SERVICE_TYPE, RAD_FRAMED) != 0 ||
765       rad_put_int(r->cx.rad, RAD_FRAMED_PROTOCOL, RAD_PPP) != 0) {
766     log_Printf(LogERROR, "rad_put: %s\n", rad_strerror(r->cx.rad));
767     rad_close(r->cx.rad);
768     return 0;
769   }
770
771   switch (authp->physical->link.lcp.want_auth) {
772   case PROTO_PAP:
773     /* We're talking PAP */
774     if (rad_put_attr(r->cx.rad, RAD_USER_PASSWORD, key, klen) != 0) {
775       log_Printf(LogERROR, "PAP: rad_put_string: %s\n",
776                  rad_strerror(r->cx.rad));
777       rad_close(r->cx.rad);
778       return 0;
779     }
780     break;
781
782   case PROTO_CHAP:
783     switch (authp->physical->link.lcp.want_authtype) {
784     case 0x5:
785       if (rad_put_attr(r->cx.rad, RAD_CHAP_PASSWORD, key, klen) != 0 ||
786           rad_put_attr(r->cx.rad, RAD_CHAP_CHALLENGE, nchallenge, nclen) != 0) {
787         log_Printf(LogERROR, "CHAP: rad_put_string: %s\n",
788                    rad_strerror(r->cx.rad));
789         rad_close(r->cx.rad);
790         return 0;
791       }
792       break;
793
794 #ifndef NODES
795     case 0x80:
796       if (klen != 50) {
797         log_Printf(LogERROR, "CHAP80: Unrecognised key length %d\n", klen);
798         rad_close(r->cx.rad);
799         return 0;
800       }
801
802       rad_put_vendor_attr(r->cx.rad, RAD_VENDOR_MICROSOFT,
803                           RAD_MICROSOFT_MS_CHAP_CHALLENGE, nchallenge, nclen);
804       msresp.ident = *key;
805       msresp.flags = 0x01;
806       memcpy(msresp.lm_response, key + 1, 24);
807       memcpy(msresp.nt_response, key + 25, 24);
808       rad_put_vendor_attr(r->cx.rad, RAD_VENDOR_MICROSOFT,
809                           RAD_MICROSOFT_MS_CHAP_RESPONSE, &msresp,
810                           sizeof msresp);
811       break;
812
813     case 0x81:
814       if (klen != sizeof(*keyv2) + 1) {
815         log_Printf(LogERROR, "CHAP81: Unrecognised key length %d\n", klen);
816         rad_close(r->cx.rad);
817         return 0;
818       }
819
820       keyv2 = (const struct MSCHAPv2_resp *)(key + 1);
821       rad_put_vendor_attr(r->cx.rad, RAD_VENDOR_MICROSOFT,
822                           RAD_MICROSOFT_MS_CHAP_CHALLENGE, nchallenge, nclen);
823       msresp2.ident = *key;
824       msresp2.flags = keyv2->Flags;
825       memcpy(msresp2.response, keyv2->NTResponse, sizeof msresp2.response);
826       memset(msresp2.reserved, '\0', sizeof msresp2.reserved);
827       memcpy(msresp2.pchallenge, keyv2->PeerChallenge,
828              sizeof msresp2.pchallenge);
829       rad_put_vendor_attr(r->cx.rad, RAD_VENDOR_MICROSOFT,
830                           RAD_MICROSOFT_MS_CHAP2_RESPONSE, &msresp2,
831                           sizeof msresp2);
832       break;
833 #endif
834     default:
835       log_Printf(LogERROR, "CHAP: Unrecognised type 0x%02x\n",
836                  authp->physical->link.lcp.want_authtype);
837       rad_close(r->cx.rad);
838       return 0;
839     }
840   }
841
842   if (gethostname(hostname, sizeof hostname) != 0)
843     log_Printf(LogERROR, "rad_put: gethostname(): %s\n", strerror(errno));
844   else {
845 #if 0
846     if ((hp = gethostbyname(hostname)) != NULL) {
847       hostaddr.s_addr = *(u_long *)hp->h_addr;
848       if (rad_put_addr(r->cx.rad, RAD_NAS_IP_ADDRESS, hostaddr) != 0) {
849         log_Printf(LogERROR, "rad_put: rad_put_string: %s\n",
850                    rad_strerror(r->cx.rad));
851         rad_close(r->cx.rad);
852         return 0;
853       }
854     }
855 #endif
856     if (rad_put_string(r->cx.rad, RAD_NAS_IDENTIFIER, hostname) != 0) {
857       log_Printf(LogERROR, "rad_put: rad_put_string: %s\n",
858                  rad_strerror(r->cx.rad));
859       rad_close(r->cx.rad);
860       return 0;
861     }
862   }
863
864   radius_put_physical_details(r->cx.rad, authp->physical);
865
866   r->cx.auth = authp;
867   if ((got = rad_init_send_request(r->cx.rad, &r->cx.fd, &tv)))
868     radius_Process(r, got);
869   else {
870     log_Printf(LogPHASE, "Radius: Request sent\n");
871     log_Printf(LogDEBUG, "Using radius_Timeout [%p]\n", radius_Timeout);
872     r->cx.timer.load = tv.tv_usec / TICKUNIT + tv.tv_sec * SECTICKS;
873     r->cx.timer.func = radius_Timeout;
874     r->cx.timer.name = "radius auth";
875     r->cx.timer.arg = r;
876     timer_Start(&r->cx.timer);
877   }
878
879   return 1;
880 }
881
882 /*
883  * Send an accounting request to the RADIUS server
884  */
885 void
886 radius_Account(struct radius *r, struct radacct *ac, struct datalink *dl,
887                int acct_type, struct in_addr *peer_ip, struct in_addr *netmask,
888                struct pppThroughput *stats)
889 {
890   struct timeval tv;
891   int got;
892   char hostname[MAXHOSTNAMELEN];
893 #if 0
894   struct hostent *hp;
895   struct in_addr hostaddr;
896 #endif
897
898   if (!*r->cfg.file)
899     return;
900
901   if (r->cx.fd != -1)
902     /*
903      * We assume that our name/key/challenge is the same as last time,
904      * and just continue to wait for the RADIUS server(s).
905      */
906     return;
907
908   timer_Stop(&r->cx.timer);
909
910   if ((r->cx.rad = rad_acct_open()) == NULL) {
911     log_Printf(LogERROR, "rad_auth_open: %s\n", strerror(errno));
912     return;
913   }
914
915   if (rad_config(r->cx.rad, r->cfg.file) != 0) {
916     log_Printf(LogERROR, "rad_config: %s\n", rad_strerror(r->cx.rad));
917     rad_close(r->cx.rad);
918     return;
919   }
920
921   if (rad_create_request(r->cx.rad, RAD_ACCOUNTING_REQUEST) != 0) {
922     log_Printf(LogERROR, "rad_create_request: %s\n", rad_strerror(r->cx.rad));
923     rad_close(r->cx.rad);
924     return;
925   }
926
927   /* Grab some accounting data and initialize structure */
928   if (acct_type == RAD_START) {
929     ac->rad_parent = r;
930     /* Fetch username from datalink */
931     strncpy(ac->user_name, dl->peer.authname, sizeof ac->user_name);
932     ac->user_name[AUTHLEN-1] = '\0';
933
934     ac->authentic = 2;          /* Assume RADIUS verified auth data */
935
936     /* Generate a session ID */
937     snprintf(ac->session_id, sizeof ac->session_id, "%s%ld-%s%lu",
938              dl->bundle->cfg.auth.name, (long)getpid(),
939              dl->peer.authname, (unsigned long)stats->uptime);
940
941     /* And grab our MP socket name */
942     snprintf(ac->multi_session_id, sizeof ac->multi_session_id, "%s",
943              dl->bundle->ncp.mp.active ?
944              dl->bundle->ncp.mp.server.socket.sun_path : "");
945
946     /* Fetch IP, netmask from IPCP */
947     memcpy(&ac->ip, peer_ip, sizeof(ac->ip));
948     memcpy(&ac->mask, netmask, sizeof(ac->mask));
949   }
950
951   if (rad_put_string(r->cx.rad, RAD_USER_NAME, ac->user_name) != 0 ||
952       rad_put_int(r->cx.rad, RAD_SERVICE_TYPE, RAD_FRAMED) != 0 ||
953       rad_put_int(r->cx.rad, RAD_FRAMED_PROTOCOL, RAD_PPP) != 0 ||
954       rad_put_addr(r->cx.rad, RAD_FRAMED_IP_ADDRESS, ac->ip) != 0 ||
955       rad_put_addr(r->cx.rad, RAD_FRAMED_IP_NETMASK, ac->mask) != 0) {
956     log_Printf(LogERROR, "rad_put: %s\n", rad_strerror(r->cx.rad));
957     rad_close(r->cx.rad);
958     return;
959   }
960
961   if (gethostname(hostname, sizeof hostname) != 0)
962     log_Printf(LogERROR, "rad_put: gethostname(): %s\n", strerror(errno));
963   else {
964 #if 0
965     if ((hp = gethostbyname(hostname)) != NULL) {
966       hostaddr.s_addr = *(u_long *)hp->h_addr;
967       if (rad_put_addr(r->cx.rad, RAD_NAS_IP_ADDRESS, hostaddr) != 0) {
968         log_Printf(LogERROR, "rad_put: rad_put_string: %s\n",
969                    rad_strerror(r->cx.rad));
970         rad_close(r->cx.rad);
971         return;
972       }
973     }
974 #endif
975     if (rad_put_string(r->cx.rad, RAD_NAS_IDENTIFIER, hostname) != 0) {
976       log_Printf(LogERROR, "rad_put: rad_put_string: %s\n",
977                  rad_strerror(r->cx.rad));
978       rad_close(r->cx.rad);
979       return;
980     }
981   }
982
983   radius_put_physical_details(r->cx.rad, dl->physical);
984
985   if (rad_put_int(r->cx.rad, RAD_ACCT_STATUS_TYPE, acct_type) != 0 ||
986       rad_put_string(r->cx.rad, RAD_ACCT_SESSION_ID, ac->session_id) != 0 ||
987       rad_put_string(r->cx.rad, RAD_ACCT_MULTI_SESSION_ID,
988                      ac->multi_session_id) != 0 ||
989       rad_put_int(r->cx.rad, RAD_ACCT_DELAY_TIME, 0) != 0) {
990 /* XXX ACCT_DELAY_TIME should be increased each time a packet is waiting */
991     log_Printf(LogERROR, "rad_put: %s\n", rad_strerror(r->cx.rad));
992     rad_close(r->cx.rad);
993     return;
994   }
995
996   if (acct_type == RAD_STOP)
997   /* Show some statistics */
998     if (rad_put_int(r->cx.rad, RAD_ACCT_INPUT_OCTETS, stats->OctetsIn) != 0 ||
999         rad_put_int(r->cx.rad, RAD_ACCT_INPUT_PACKETS, stats->PacketsIn) != 0 ||
1000         rad_put_int(r->cx.rad, RAD_ACCT_OUTPUT_OCTETS, stats->OctetsOut) != 0 ||
1001         rad_put_int(r->cx.rad, RAD_ACCT_OUTPUT_PACKETS, stats->PacketsOut)
1002         != 0 ||
1003         rad_put_int(r->cx.rad, RAD_ACCT_SESSION_TIME, throughput_uptime(stats))
1004         != 0) {
1005       log_Printf(LogERROR, "rad_put: %s\n", rad_strerror(r->cx.rad));
1006       rad_close(r->cx.rad);
1007       return;
1008     }
1009
1010   r->cx.auth = NULL;                    /* Not valid for accounting requests */
1011   if ((got = rad_init_send_request(r->cx.rad, &r->cx.fd, &tv)))
1012     radius_Process(r, got);
1013   else {
1014     log_Printf(LogDEBUG, "Using radius_Timeout [%p]\n", radius_Timeout);
1015     r->cx.timer.load = tv.tv_usec / TICKUNIT + tv.tv_sec * SECTICKS;
1016     r->cx.timer.func = radius_Timeout;
1017     r->cx.timer.name = "radius acct";
1018     r->cx.timer.arg = r;
1019     timer_Start(&r->cx.timer);
1020   }
1021 }
1022
1023 /*
1024  * How do things look at the moment ?
1025  */
1026 void
1027 radius_Show(struct radius *r, struct prompt *p)
1028 {
1029   prompt_Printf(p, " Radius config:     %s",
1030                 *r->cfg.file ? r->cfg.file : "none");
1031   if (r->valid) {
1032     prompt_Printf(p, "\n                IP: %s\n", inet_ntoa(r->ip));
1033     prompt_Printf(p, "           Netmask: %s\n", inet_ntoa(r->mask));
1034     prompt_Printf(p, "               MTU: %lu\n", r->mtu);
1035     prompt_Printf(p, "                VJ: %sabled\n", r->vj ? "en" : "dis");
1036     prompt_Printf(p, "           Message: %s\n", r->repstr ? r->repstr : "");
1037     prompt_Printf(p, "   MPPE Enc Policy: %s\n",
1038                   radius_policyname(r->mppe.policy));
1039     prompt_Printf(p, "    MPPE Enc Types: %s\n",
1040                   radius_typesname(r->mppe.types));
1041     prompt_Printf(p, "     MPPE Recv Key: %seceived\n",
1042                   r->mppe.recvkey ? "R" : "Not r");
1043     prompt_Printf(p, "     MPPE Send Key: %seceived\n",
1044                   r->mppe.sendkey ? "R" : "Not r");
1045     prompt_Printf(p, " MS-CHAP2-Response: %s\n",
1046                   r->msrepstr ? r->msrepstr : "");
1047     prompt_Printf(p, "     Error Message: %s\n", r->errstr ? r->errstr : "");
1048     if (r->routes)
1049       route_ShowSticky(p, r->routes, "            Routes", 16);
1050   } else
1051     prompt_Printf(p, " (not authenticated)\n");
1052 }