network.subr - move get_if_var here
[dragonfly.git] / etc / rc.d / netif
1 #!/bin/sh
2 #
3 # Copyright (c) 2003 The FreeBSD Project. All rights reserved.
4 #
5 # Redistribution and use in source and binary forms, with or without
6 # modification, are permitted provided that the following conditions
7 # are met:
8 # 1. Redistributions of source code must retain the above copyright
9 #    notice, this list of conditions and the following disclaimer.
10 # 2. Redistributions in binary form must reproduce the above copyright
11 #    notice, this list of conditions and the following disclaimer in the
12 #    documentation and/or other materials provided with the distribution.
13 #
14 # THIS SOFTWARE IS PROVIDED BY THE PROJECT ``AS IS'' AND ANY EXPRESS OR
15 # IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
16 # OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
17 # IN NO EVENT SHALL THE PROJECT BE LIABLE FOR ANY DIRECT, INDIRECT,
18 # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
19 # NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
20 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
21 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
22 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
23 # THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
24 #
25 # $FreeBSD: src/etc/rc.d/netif,v 1.2 2003/06/29 05:34:41 mtm Exp $
26 #
27
28 # PROVIDE: netif
29 # REQUIRE: cleanvar mountcritlocal serial sppp sysctl tty
30
31 . /etc/rc.subr
32 . /etc/network.subr
33
34 name="network"
35 start_cmd="network_start"
36 stop_cmd="network_stop"
37 cloneup_cmd="clone_up"
38 clonedown_cmd="clone_down"
39 extra_commands="cloneup clonedown"
40 _cmdifn=
41
42 network_start()
43 {
44         # Set the list of interfaces to work on.
45         #
46         _cmdifn=$*
47
48         if [ -z "$_cmdifn" ]; then
49                 #
50                 # We're operating as a general network start routine.
51                 #
52
53                 # Create cloned interfaces
54                 clone_up
55
56                 # Create IPv6<-->IPv4 tunnels
57                 gif_up
58
59                 # Rename interfaces.
60                 ifnet_rename
61         fi
62
63         # Configure the interface(s).
64         network_common ifn_start verbose
65
66         # Give our interfaces a little time to come up
67         # before we start pounding them.  In particular, dhclient
68         # and named can get mightily confused.
69         sleep 2
70 }
71
72 network_stop()
73 {
74         # Set the list of interfaces to work on.
75         #
76         _cmdifn=$*
77
78         echo -n "Stopping network:"
79
80         # Deconfigure the interface(s)
81         network_common ifn_stop
82         echo '.'
83 }
84
85 # network_common routine verbose
86 #       Common configuration subroutine for network interfaces. This
87 #       routine takes all the preparatory steps needed for configuring
88 #       an interface and then calls $routine. If $verbose is specified,
89 #       it will call ifconfig(8) to show, in long format, the configured
90 #       interfaces. If $verbose is not given, it will simply output the
91 #       configured interface(s).
92 network_common()
93 {
94         _func=
95         _verbose=
96
97         if [ -z "$1" ]; then
98                 err 1 "network_common(): No function name specified."
99         else
100                 _func="$1"
101         fi
102         [ -n "$2" ] && _verbose=yes
103
104         # Get a list of network interfaces.
105         _ifn_list="`list_net_interfaces`"
106
107         # Set the scope of the command (all interfaces or just one).
108         #
109         _cooked_list=
110         if [ -n "$_cmdifn" ]; then
111                 for i in $_cmdifn ; do
112                         eval _if=\"`expr "$_ifn_list" : ".*\(${i}\).*"`\"
113                         if [ -z "$_if" ]; then
114                                 err 1 "No such network interface: $i"
115                         fi
116                         _cooked_list="$_cooked_list $_if"
117                 done
118         else
119                 _cooked_list="$_ifn_list"
120         fi
121
122         for ifn in ${_cooked_list}; do
123                 if ${_func} ${ifn} ; then
124                         eval showstat_$ifn=1
125                 else
126                         _fail="$_fail $ifn"
127                 fi
128         done
129
130         # Display interfaces configured by this script
131         #
132         for ifn in ${_cooked_list}; do
133                 eval showstat=\$showstat_${ifn}
134                 if [ ! -z ${showstat} ]; then
135                         if [ -n "$_verbose" ]; then
136                                 ifconfig ${ifn}
137                         else
138                                 echo -n " ${ifn}"
139                         fi
140                 fi
141         done
142         debug "The following interfaces were not configured: $_fail"
143 }
144
145 ifn_start()
146 {
147         local ifn cfg
148         ifn="$1"
149         cfg=1
150
151         [ -z "$ifn" ] && return 1
152
153         ifscript_up ${ifn} && cfg=0
154         ifconfig_up ${ifn} && cfg=0
155         ifalias_up ${ifn} && cfg=0
156         childif_create ${ifn} && cfg=0
157
158         return $cfg
159 }
160
161 ifn_stop()
162 {
163         local ifn cfg
164         ifn="$1"
165         cfg=1
166
167         [ -z "$ifn" ] && return 1
168
169         ifalias_down ${ifn} && cfg=0
170         ifconfig_down ${ifn} && cfg=0
171         ifscript_down ${ifn} && cfg=0
172         childif_destroy ${ifn} && cfg=0
173
174         return $cfg
175 }
176
177 # childif_create
178 #       Create and configure child interfaces.  Return 0 if child
179 #       interfaces are created.
180 #
181 childif_create()
182 {
183         local cfg child child_vlans child_wlans create_args debug_flags ifn i
184         cfg=1
185         ifn=$1
186
187         # Create wireless interfaces
188         child_wlans=`get_if_var $ifn wlans_IF`
189
190         for child in ${child_wlans}; do
191                 create_args="wlandev $ifn `get_if_var $child create_args_IF`"
192                 debug_flags="`get_if_var $child wlandebug_IF`"
193
194                 if expr $child : 'wlan[0-9][0-9]*$' >/dev/null 2>&1; then
195                         ifconfig $child create ${create_args} && cfg=0
196                         if [ -n "${debug_flags}" ]; then
197                                 wlandebug -i $child ${debug_flags}
198                         fi
199                 else
200                         i=`ifconfig wlan create ${create_args}`
201                         if [ -n "${debug_flags}" ]; then
202                                 wlandebug -i $i ${debug_flags}
203                         fi
204                         ifconfig $i name $child && cfg=0
205                 fi
206                 ifn_start $child
207         done
208
209         return ${cfg}
210 }
211
212 # childif_destroy
213 #       Destroy child interfaces.
214 #
215 childif_destroy()
216 {
217         local cfg child child_vlans child_wlans ifn
218         cfg=1
219
220         child_wlans=`get_if_var $ifn wlans_IF`
221         for child in ${child_wlans}; do
222                 if ! `ifconfig -n $child > /dev/null 2>&1`; then
223                         continue
224                 fi
225                 ifn_stop $child
226                 ifconfig $child destroy && cfg=0
227         done
228
229         return ${cfg}
230 }
231
232 load_rc_config $name
233 run_rc_command $*