Correct wrong definition of PM timer mask and adjust L1/PM timer
[dragonfly.git] / Makefile.inc1
CommitLineData
984263bc
MD
1#
2# $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
cecff5c1
MD
3#
4# Build-time options are documented in make.conf(5).
984263bc
MD
5#
6# The intended user-driven targets are:
1397f94a 7#
984263bc 8# buildworld - rebuild *everything*, including glue to help do upgrades
1397f94a
MD
9# quickworld - skip the glue and do a depend+build on the meat
10# realquickworld - skip the glue and depend stages and just build the meat
11# crossworld - only build the glue (particularly the cross-build environment)
984263bc 12# installworld- install everything built by "buildworld"
2decc9b9
JM
13# backupworld - copies /bin /sbin /usr/bin /usr/sbin /usr/lib /usr/libexec
14# to manual backup dir
15# restoreworld- installs binaries from manual backup dir to world
16# restoreworld-auto - installs binaries from auto-backup dir to world
984263bc
MD
17# most - build user commands, no libraries or include files
18# installmost - install user commands, no libraries or include files
2decc9b9
JM
19# backup-clean - delete backup from manual backup dir
20# backup-auto-clean - delete backup from auto-backup dir
984263bc
MD
21#
22# Standard targets (not defined here) are documented in the makefiles in
23# /usr/share/mk. These include:
24# obj depend all install clean cleandepend cleanobj
25
26# Put initial settings here.
27SUBDIR=
28
16dbe6a9
FT
29# /libexec/ld-elf.so.2 needs to be installed first
30# Otherwise, install(1) beeing a dynamically linked binary will fail
31# during the first upgrade from a static to a dynamic world
32.if exists(${.CURDIR}/libexec)
33SUBDIR+= libexec
34.endif
35
984263bc
MD
36# We must do share/info early so that installation of info `dir'
37# entries works correctly. Do it first since it is less likely to
38# grow dependencies on include and lib than vice versa.
39.if exists(${.CURDIR}/share/info)
40SUBDIR+= share/info
41.endif
42
43# We must do include and lib early so that the perl *.ph generation
44# works correctly as it uses the header files installed by this.
45.if exists(${.CURDIR}/include)
46SUBDIR+= include
47.endif
48.if exists(${.CURDIR}/lib)
49SUBDIR+= lib
50.endif
17d0fefe
MD
51# This exists simply to ensure that the obj dir hierarchy is
52# intact for nrelease, allowing the nrelease Makefile's to
53# reference ${.OBJDIR}.
54#
55.if exists(${.CURDIR}/nrelease)
56SUBDIR+= nrelease
57.endif
984263bc
MD
58
59.if exists(${.CURDIR}/bin)
60SUBDIR+= bin
61.endif
cecff5c1 62.if exists(${.CURDIR}/games) && !defined(NO_GAMES)
984263bc
MD
63SUBDIR+= games
64.endif
65.if exists(${.CURDIR}/gnu)
66SUBDIR+= gnu
67.endif
984263bc
MD
68.if exists(${.CURDIR}/sbin)
69SUBDIR+= sbin
70.endif
cecff5c1 71.if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
984263bc
MD
72SUBDIR+= secure
73.endif
cecff5c1 74.if exists(${.CURDIR}/share) && !defined(NO_SHARE)
984263bc
MD
75SUBDIR+= share
76.endif
77.if exists(${.CURDIR}/sys)
78SUBDIR+= sys
79.endif
80.if exists(${.CURDIR}/usr.bin)
81SUBDIR+= usr.bin
82.endif
83.if exists(${.CURDIR}/usr.sbin)
84SUBDIR+= usr.sbin
85.endif
86
984263bc
MD
87.if exists(${.CURDIR}/etc)
88SUBDIR+= etc
89.endif
90
91# These are last, since it is nice to at least get the base system
92# rebuilt before you do them.
93.if defined(LOCAL_DIRS)
94.for _DIR in ${LOCAL_DIRS}
95.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
96SUBDIR+= ${_DIR}
97.endif
98.endfor
99.endif
100
101.if defined(SUBDIR_OVERRIDE)
102SUBDIR= ${SUBDIR_OVERRIDE}
103.endif
104
105.if defined(NOCLEANDIR)
106CLEANDIR= clean cleandepend
107.else
108CLEANDIR= cleandir
109.endif
110
9974d917
SS
111.if defined(NO_CLEAN)
112NOCLEAN= # defined
113.endif
d0a8f509 114
1397f94a
MD
115# Object directory base in primary make. Note that when we rerun make
116# from inside this file we change MAKEOBJDIRPREFIX to the appropriate
117# subdirectory because the rest of the build system needs it that way.
118# The original object directory base is saved in OBJTREE.
119#
984263bc 120MAKEOBJDIRPREFIX?= /usr/obj
1397f94a
MD
121OBJTREE?= ${MAKEOBJDIRPREFIX}
122
123# Used for stage installs and pathing
124#
75d86d8d 125DESTDIRBASE:= ${OBJTREE}${.CURDIR}
1397f94a 126
c89fd520
SS
127# Remove DESTDIR from MAKEFLAGS. It is present in the environment
128# anyhow, and we need to be able to override it for stage installs
129.MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*}
130
0756733f 131# This section sets the tools used to build the world/kernel
6100d1de 132WORLD_CCVER?= gcc47
0756733f 133WORLD_LDVER?= ld.bfd
e05895f1 134WORLD_BINUTILSVER?= binutils224
ded5c503 135
7bee86c0
JM
136# Set the backup parameters if they are not already defined
137#
61443441 138WORLD_BACKUP?= /var/backups/world_backup
2decc9b9 139AUTO_BACKUP?= ${OBJTREE}/world_backup/${DESTDIR}
7bee86c0 140
984263bc
MD
141TARGET_ARCH?= ${MACHINE_ARCH}
142.if ${TARGET_ARCH} == ${MACHINE_ARCH}
143TARGET?= ${MACHINE}
144.else
145TARGET?= ${TARGET_ARCH}
146.endif
147.if make(buildworld)
148BUILD_ARCH!= sysctl -n hw.machine_arch
b2b3ffcd
SS
149
150# temporary until everybody has converted to x86_64
151.if ${BUILD_ARCH} == "amd64"
152BUILD_ARCH= x86_64
153.endif
154
984263bc
MD
155.if ${MACHINE_ARCH} != ${BUILD_ARCH}
156.error To cross-build, set TARGET_ARCH.
157.endif
158.endif
1397f94a 159
0955fd91
MD
160# Backwards compatibility with older make's or older sys.mk's. make
161# is expected to define MACHINE_PLATFORM.
162#
163.if !defined(MACHINE_PLATFORM)
164MACHINE_PLATFORM= pc32
165.endif
4d005c1d
SS
166
167# XXX this is ugly and we need to come up with a nicer solution
168.if !defined(TARGET_PLATFORM)
169.if ${TARGET_ARCH} == "i386"
170TARGET_PLATFORM= pc32
b2b3ffcd 171.elif ${TARGET_ARCH} == "x86_64"
4d005c1d
SS
172TARGET_PLATFORM= pc64
173.else
174.error Unknown target architecture.
175.endif
176.endif
0955fd91 177
5f87b7d3
SZ
178THREAD_LIB?= thread_xu
179.if ${THREAD_LIB} == "c_r"
180.if defined(NO_LIBC_R)
181.error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
182.endif
183.endif
184
1397f94a
MD
185# BTOOLS (Natively built) All non-cross-development tools that the
186# main build needs. This includes things like 'mkdir' and 'rm'.
187# We will not use the native system's exec path once we start
188# on WORLD. (bootstrap-tools and build-tools or BTOOLS)
189#
190# CTOOLS (Natively built) Cross development tools which are specific
191# to the target architecture.
192#
193# WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and
194# CTOOLS.
195#
0955fd91
MD
196# MACHINE_PLATFORM Platform Architecture we are building on
197# MACHINE Machine Architecture (usually the same as MACHINE_ARCH)
e2ea6619
MD
198# MACHINE_ARCH Cpu Architecture we are building on
199#
0955fd91
MD
200# TARGET_PLATFORM Platform Architecture we are building for
201# TARGET Machine Architecture we are building for
e2ea6619 202# TARGET_ARCH Cpu Architecture we are building for
1397f94a
MD
203#
204BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH}
205CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
206WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH}
207
79aa78bc
MD
208# The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
209# cross-tools stages to augment the existing command path to access newer
210# versions of certain utilities such as 'patch' that the cross-tools stage
211# might expect.
212#
213BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
214
1397f94a
MD
215# The strict temporary command path contains all binaries required
216# by the buildworld system after the cross-tools stage.
217#
ee48961f 218STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games:/usr/local/bin:/usr/pkg/bin
984263bc
MD
219
220TMPDIR?= /tmp
221TMPPID!= echo $$$$
984263bc
MD
222
223#
224# Building a world goes through the following stages
225#
226# 1. bootstrap-tool stage [BMAKE]
227# This stage is responsible for creating programs that
228# are needed for backward compatibility reasons. They
229# are not built as cross-tools.
230# 2. build-tool stage [TMAKE]
231# This stage is responsible for creating the object
232# tree and building any tools that are needed during
233# the build process.
234# 3. cross-tool stage [XMAKE]
235# This stage is responsible for creating any tools that
236# are needed for cross-builds. A cross-compiler is one
237# of them.
238# 4. world stage [WMAKE]
239# This stage actually builds the world.
240# 5. install stage (optional) [IMAKE]
241# This stage installs a previously built world.
242#
e92bae40
MD
243# In all cases we must carefully adjust the environment so the proper
244# tools and header files are used.
245#
246# NOTE: The M4 environment variable is used by the [f]lex binary to
247# override the location of the 'm4' binary. The override is
248# needed for certain buildworld version transitions, specifically
249# past a certain point in 3.3 because the older /usr/bin/m4 will
250# generate output that will blow up the newer [f]lex/yacc/bison
251# utilities.
252#
984263bc 253
984263bc 254# bootstrap-tool stage
1397f94a
MD
255#
256BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
257 OBJTREE=${OBJTREE} \
44831353 258 DESTDIR=${BTOOLSDEST} \
79aa78bc 259 PATH=${BTOOLSPATH}:${PATH} \
e92bae40 260 M4=${BTOOLSDEST}/usr/bin/m4 \
984263bc 261 INSTALL="sh ${.CURDIR}/tools/install.sh"
1397f94a 262
f8a75064 263BMAKE= ${BMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
e486d225
SS
264 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
265 -DNO_WERROR -DNO_NLS
984263bc
MD
266
267# build-tool stage
1397f94a
MD
268#
269TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
270 OBJTREE=${OBJTREE} \
984263bc 271 DESTDIR= \
79aa78bc 272 PATH=${BTOOLSPATH}:${PATH} \
e92bae40 273 M4=${BTOOLSDEST}/usr/bin/m4 \
984263bc 274 INSTALL="sh ${.CURDIR}/tools/install.sh"
1397f94a 275
f8a75064 276TMAKE= ${TMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
e486d225 277 -DNO_FORTRAN -DNOSHARED
984263bc
MD
278
279# cross-tool stage
1397f94a
MD
280#
281# note: TOOLS_PREFIX points to the obj root holding the cross
44831353
MD
282# compiler binaries, while USRDATA_PREFIX points to the obj root
283# holding the target environment (and also determines where cross-built
284# libraries, crt*.o, and include files are installed).
1397f94a
MD
285#
286XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \
287 OBJTREE=${OBJTREE} \
288 DESTDIR=${CTOOLSDEST} \
aa8dd846 289 _SHLIBDIRPREFIX=${CTOOLSDEST} \
1397f94a
MD
290 INSTALL="sh ${.CURDIR}/tools/install.sh" \
291 TOOLS_PREFIX=${CTOOLSDEST} \
79aa78bc 292 USRDATA_PREFIX=${WORLDDEST} \
e92bae40 293 M4=${BTOOLSDEST}/usr/bin/m4 \
79aa78bc 294 PATH=${BTOOLSPATH}:${PATH}
1397f94a 295
f8a75064 296XMAKE= ${XMAKEENV} make -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
e486d225 297 -DBOOTSTRAPPING -DNOSHARED
1397f94a
MD
298
299# world stage, note the strict path and note that TOOLS_PREFIX is left
300# unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
301# which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
302# for both binary and library paths, even though it is being compiled to
303# WORLDDEST. None of the programs in the world stage are ever actually
304# executed during the buildworld/installworld.
305#
306CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \
307 OBJTREE=${OBJTREE} \
308 MACHINE_ARCH=${TARGET_ARCH} \
309 MACHINE=${TARGET} \
0955fd91 310 MACHINE_PLATFORM=${TARGET_PLATFORM} \
ded5c503 311 OBJFORMAT_PATH=${CTOOLSDEST} \
ce6fa878 312 HOST_CCVER=${HOST_CCVER} \
123dec51 313 CCVER=${WORLD_CCVER} \
0756733f 314 LDVER=${WORLD_LDVER} \
123dec51 315 BINUTILSVER=${WORLD_BINUTILSVER}
984263bc 316
984263bc 317WMAKEENV= ${CROSSENV} \
1397f94a 318 DESTDIR=${WORLDDEST} \
aa8dd846 319 _SHLIBDIRPREFIX=${WORLDDEST} \
984263bc 320 INSTALL="sh ${.CURDIR}/tools/install.sh" \
e92bae40 321 M4=${BTOOLSDEST}/usr/bin/m4 \
1397f94a
MD
322 PATH=${STRICTTMPPATH}
323
f8a75064 324WMAKE= ${WMAKEENV} make -f Makefile.inc1
984263bc
MD
325
326# install stage
b07b69cc 327#
984263bc 328IMAKEENV= ${CROSSENV} \
1397f94a 329 PATH=${STRICTTMPPATH}
f8a75064 330IMAKE= ${IMAKEENV} make -f Makefile.inc1
984263bc
MD
331
332# kernel stage
b07b69cc
MD
333#
334KMAKEENV= ${WMAKEENV}
984263bc 335
984263bc
MD
336# buildworld
337#
338# Attempt to rebuild the entire system, with reasonable chance of
339# success, regardless of how old your existing system is.
340#
2cde9453
SS
341_worldtmp: _cleantmp _mtreetmp
342.ORDER: _cleantmp _mtreetmp
343
344_cleantmp:
984263bc
MD
345 @echo
346 @echo "--------------------------------------------------------------"
347 @echo ">>> Rebuilding the temporary build tree"
348 @echo "--------------------------------------------------------------"
349.if !defined(NOCLEAN)
1397f94a 350 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
984263bc
MD
351.else
352 # XXX - These two can depend on any header file.
353 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
354 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
355.endif
2cde9453
SS
356
357_mtreetmp:
1397f94a
MD
358 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
359.for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
360 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \
361 -p ${_dir}/ > /dev/null
362 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
363 -p ${_dir}/usr > /dev/null
984263bc 364.endfor
1397f94a
MD
365 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
366 -p ${WORLDDEST}/usr/include > /dev/null
062db326 367 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
1397f94a 368
984263bc
MD
369_bootstrap-tools:
370 @echo
371 @echo "--------------------------------------------------------------"
372 @echo ">>> stage 1: bootstrap tools"
373 @echo "--------------------------------------------------------------"
374 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
375_cleanobj:
984263bc
MD
376 @echo
377 @echo "--------------------------------------------------------------"
1397f94a 378 @echo ">>> stage 2a: cleaning up the object tree"
984263bc
MD
379 @echo "--------------------------------------------------------------"
380 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
984263bc
MD
381_obj:
382 @echo
383 @echo "--------------------------------------------------------------"
1397f94a 384 @echo ">>> stage 2b: rebuilding the object tree"
984263bc
MD
385 @echo "--------------------------------------------------------------"
386 cd ${.CURDIR}; ${WMAKE} par-obj
387_build-tools:
388 @echo
389 @echo "--------------------------------------------------------------"
1397f94a 390 @echo ">>> stage 2c: build tools"
984263bc
MD
391 @echo "--------------------------------------------------------------"
392 cd ${.CURDIR}; ${TMAKE} build-tools
393_cross-tools:
394 @echo
395 @echo "--------------------------------------------------------------"
396 @echo ">>> stage 3: cross tools"
397 @echo "--------------------------------------------------------------"
398 cd ${.CURDIR}; ${XMAKE} cross-tools
399_includes:
400 @echo
401 @echo "--------------------------------------------------------------"
1397f94a 402 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
984263bc
MD
403 @echo "--------------------------------------------------------------"
404 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
405_libraries:
406 @echo
407 @echo "--------------------------------------------------------------"
1397f94a 408 @echo ">>> stage 4b: building libraries"
984263bc
MD
409 @echo "--------------------------------------------------------------"
410 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
411_depend:
412 @echo
413 @echo "--------------------------------------------------------------"
1397f94a 414 @echo ">>> stage 4c: make dependencies"
984263bc
MD
415 @echo "--------------------------------------------------------------"
416 cd ${.CURDIR}; ${WMAKE} par-depend
417everything:
418 @echo
419 @echo "--------------------------------------------------------------"
1397f94a 420 @echo ">>> stage 4d: building everything.."
984263bc
MD
421 @echo "--------------------------------------------------------------"
422 cd ${.CURDIR}; ${WMAKE} all
423
1397f94a
MD
424# note: buildworld no longer depends on _cleanobj because we rm -rf the
425# entire object tree and built the bootstrap tools in a different location.
426#
427# buildworld - build everything from scratch
428# quickworld - skip the bootstrap, build, and cross-build steps
429# realquickworld - skip the bootstrap, build, crossbuild, and depend step.
430#
431# note: we include _obj in realquickworld to prevent accidental creation
432# of files in /usr/src.
984263bc 433
c08b39fe 434WMAKE_TGTS=
984263bc
MD
435.if !defined(SUBDIR_OVERRIDE)
436WMAKE_TGTS+= _worldtmp _bootstrap-tools
437.endif
1397f94a 438WMAKE_TGTS+= _obj _build-tools
984263bc
MD
439.if !defined(SUBDIR_OVERRIDE)
440WMAKE_TGTS+= _cross-tools
441.endif
442WMAKE_TGTS+= _includes _libraries _depend everything
443
444buildworld: ${WMAKE_TGTS}
1397f94a 445
2cde9453 446quickworld: _mtreetmp _obj _includes _libraries _depend everything
1397f94a 447
2cde9453 448realquickworld: _mtreetmp _obj _includes _libraries everything
1397f94a
MD
449
450crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
451
984263bc 452.ORDER: ${WMAKE_TGTS}
9ce30817 453.ORDER: _obj _includes
2cde9453 454.ORDER: _mtreetmp _obj
61443441 455.ORDER: installcheck backupworld-auto
984263bc
MD
456
457#
458# installcheck
459#
c08b39fe 460# Checks to be sure system is ready for installworld
984263bc
MD
461#
462installcheck:
463.if !defined(NO_SENDMAIL)
3da8e88f
JM
464 @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
465 @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
984263bc 466.endif
3da8e88f
JM
467 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
468 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
469 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
9b815a46 470.if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
3da8e88f 471 @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; /usr/bin/false ; esac
9b815a46 472.endif
1516019b 473
984263bc
MD
474#
475# installworld
476#
1516019b 477# Backs up the current world if ${AUTO_BACKUP} is writable.
984263bc 478# Installs everything compiled by a 'buildworld'.
e66f5ba7
MD
479#
480# Includes sleep/sync safety before running mkinitrd.
1516019b
MD
481
482installworld: installcheck
483 -@mkdir -p ${AUTO_BACKUP} > /dev/null 2>&1
484 @cd ${.CURDIR}; \
485 (touch ${AUTO_BACKUP}/.updating > /dev/null 2>&1 && \
486 ${IMAKE} backupworld-auto) || \
487 echo "Cannot write to ${AUTO_BACKUP} - world not backed up"
488
984263bc 489 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
ec6483ce 490 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/
e66f5ba7 491 sync; sleep 2; sync; sleep 2
a93ddcbb 492 mkinitrd -b ${DESTDIR}/boot
984263bc
MD
493
494#
495# reinstall
496#
497# If you have a build server, you can NFS mount the source and obj directories
498# and do a 'make reinstall' on the *client* to install new binaries from the
499# most recent server build.
500#
501reinstall:
502 @echo "--------------------------------------------------------------"
503 @echo ">>> Making hierarchy"
504 @echo "--------------------------------------------------------------"
f8a75064 505 cd ${.CURDIR}; make -f Makefile.inc1 hierarchy
984263bc
MD
506 @echo
507 @echo "--------------------------------------------------------------"
508 @echo ">>> Installing everything.."
509 @echo "--------------------------------------------------------------"
f8a75064 510 cd ${.CURDIR}; make -f Makefile.inc1 install
984263bc 511
984263bc 512#
fc7aca3e 513# buildkernel, nativekernel, quickkernel, and installkernel
984263bc
MD
514#
515# Which kernels to build and/or install is specified by setting
516# KERNCONF. If not defined a GENERIC kernel is built/installed.
517# Only the existing (depending TARGET) config files are used
518# for building kernels and only the first of these is designated
519# as the one being installed.
520#
c2c83759
MD
521# You can specify INSTALLSTRIPPED=1 if you wish the installed
522# kernel and modules to be stripped of its debug info (required
523# symbols are left intact). You can specify INSTALLSTRIPPEDMODULES
524# if you only want to strip the modules of their debug info. These
525# only apply if you have DEBUG=-g in your kernel config or make line.
526#
984263bc
MD
527# Note that we have to use TARGET instead of TARGET_ARCH when
528# we're in kernel-land. Since only TARGET_ARCH is (expected) to
529# be set to cross-build, we have to make sure TARGET is set
530# properly.
531
532.if !defined(KERNCONF) && defined(KERNEL)
533KERNCONF= ${KERNEL}
534KERNWARN= yes
535.else
702a95cc
SS
536# XXX makeshift fix to build the right kernel for the (target) architecture
537# We should configure this in the platform files somehow
538.if ${TARGET_ARCH} == "i386"
984263bc 539KERNCONF?= GENERIC
702a95cc 540.else
b2b3ffcd 541KERNCONF?= X86_64_GENERIC
702a95cc 542.endif
984263bc
MD
543.endif
544INSTKERNNAME?= kernel
545
546KRNLSRCDIR= ${.CURDIR}/sys
4e54470f 547KRNLCONFDIR= ${KRNLSRCDIR}/config
984263bc
MD
548KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
549KERNCONFDIR?= ${KRNLCONFDIR}
550
551BUILDKERNELS=
552INSTALLKERNEL=
553.for _kernel in ${KERNCONF}
554.if exists(${KERNCONFDIR}/${_kernel})
555BUILDKERNELS+= ${_kernel}
556.if empty(INSTALLKERNEL)
557INSTALLKERNEL= ${_kernel}
558.endif
559.endif
560.endfor
561
9a359590
MD
562# kernel version numbers survive rm -rf
563#
564.for _kernel in ${BUILDKERNELS}
565.if exists(${KRNLOBJDIR}/${_kernel}/version)
566KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
567.endif
568.endfor
569
984263bc
MD
570#
571# buildkernel
572#
573# Builds all kernels defined by BUILDKERNELS.
574#
fc7aca3e 575bk_tools:
e05c8c84
MD
576 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
577 echo "You must buildworld before buildkernel. If you wish"; \
578 echo "to build a kernel using native tools, config it manually"; \
579 echo "or use the nativekernel target if you are in a rush"; \
3da8e88f 580 /usr/bin/false; \
c2c83759
MD
581 fi
582
583maybe_bk_tools:
584.for _kernel in ${BUILDKERNELS}
585 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
586 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
587 echo "The kernel was build using buildworld tools which no" ; \
588 echo "longer appear to exist, quickkernel failed!" ; \
3da8e88f 589 /usr/bin/false; \
c2c83759
MD
590 fi; \
591 fi
592.endfor
e05c8c84 593
fc7aca3e 594bk_build_list:
984263bc
MD
595.if empty(BUILDKERNELS)
596 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
603cdb58 597 @echo ">>> Did you move your kernel configs from i386/conf to config/?"
984263bc
MD
598 @false
599.endif
fc7aca3e
MD
600
601bk_kernwarn:
984263bc
MD
602.if defined(KERNWARN)
603 @echo "--------------------------------------------------------------"
604 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
605 @echo "--------------------------------------------------------------"
606 @sleep 3
607.endif
608 @echo
fc7aca3e
MD
609
610# The buildkernel target rebuilds the specified kernels from scratch
611# using the crossbuild tools generated by the last buildworld. It is
612# the safest (but also the most time consuming) way to build a new kernel.
613#
614buildkernel: bk_tools bk_build_list bk_kernwarn
984263bc
MD
615.for _kernel in ${BUILDKERNELS}
616 @echo "--------------------------------------------------------------"
617 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
618 @echo "--------------------------------------------------------------"
619 @echo "===> ${_kernel}"
fc7aca3e
MD
620.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
621 rm -rf ${KRNLOBJDIR}/${_kernel}
622.else
e05c8c84 623 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
fc7aca3e 624 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
e05c8c84 625 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
fc7aca3e 626.endif
984263bc
MD
627 mkdir -p ${KRNLOBJDIR}
628.if !defined(NO_KERNELCONFIG)
629 cd ${KRNLCONFDIR}; \
1397f94a 630 PATH=${STRICTTMPPATH} \
f8a75064 631 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
984263bc 632 ${KERNCONFDIR}/${_kernel}
9a359590
MD
633.endif
634.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
635 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
984263bc 636.endif
e05c8c84 637 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
984263bc
MD
638.if !defined(NO_KERNELDEPEND)
639 cd ${KRNLOBJDIR}/${_kernel}; \
f8a75064 640 ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend
984263bc
MD
641.endif
642 cd ${KRNLOBJDIR}/${_kernel}; \
f8a75064 643 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
984263bc
MD
644 @echo "--------------------------------------------------------------"
645 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
646 @echo "--------------------------------------------------------------"
647.endfor
648
fc7aca3e 649# The nativekernel target rebuilds the specified kernels from scratch
114580ac 650# using the system's standard compiler rather than using the crossbuild
fc7aca3e
MD
651# tools generated by the last buildworld. This is fairly safe if your
652# system is reasonable up-to-date.
e05c8c84 653#
fc7aca3e 654nativekernel: bk_build_list bk_kernwarn
e05c8c84
MD
655.for _kernel in ${BUILDKERNELS}
656 @echo "--------------------------------------------------------------"
657 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
658 @echo "--------------------------------------------------------------"
659 @echo "===> ${_kernel}"
fc7aca3e
MD
660.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
661 rm -rf ${KRNLOBJDIR}/${_kernel}
662.else
e05c8c84 663 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
fc7aca3e 664 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
e05c8c84 665 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
fc7aca3e 666.endif
e05c8c84
MD
667 mkdir -p ${KRNLOBJDIR}
668.if !defined(NO_KERNELCONFIG)
669 cd ${KRNLCONFDIR}; \
670 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
671 ${KERNCONFDIR}/${_kernel}
9a359590
MD
672.endif
673.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
674 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
e05c8c84
MD
675.endif
676 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
e05c8c84
MD
677 cd ${KRNLOBJDIR}/${_kernel}; \
678 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
f8a75064 679 make -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
e05c8c84
MD
680.if !defined(NO_KERNELDEPEND)
681 cd ${KRNLOBJDIR}/${_kernel}; \
f8a75064 682 make KERNEL=${INSTKERNNAME} depend
e05c8c84
MD
683.endif
684 cd ${KRNLOBJDIR}/${_kernel}; \
f8a75064 685 make KERNEL=${INSTKERNNAME} all
e05c8c84
MD
686 @echo "--------------------------------------------------------------"
687 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
688 @echo "--------------------------------------------------------------"
689.endfor
690
fc7aca3e
MD
691# The quickkernel target rebuilds the specified kernels as quickly
692# as possible. It will use the native tools or the buildworld cross tools
693# based on whether the kernel was originally generated via buildkernel or
694# nativekernel. Config is rerun but the object hierarchy is not rebuilt,
695# nor is the make depend step run.
984263bc 696#
c2c83759 697quickkernel: maybe_bk_tools bk_build_list bk_kernwarn
fc7aca3e
MD
698.for _kernel in ${BUILDKERNELS}
699 @echo "--------------------------------------------------------------"
700 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
701 @echo "--------------------------------------------------------------"
702 @echo "===> ${_kernel}"
703.if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
704.if !defined(NO_KERNELCONFIG)
705 cd ${KRNLCONFDIR}; \
706 PATH=${STRICTTMPPATH} \
f8a75064 707 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
fc7aca3e
MD
708 ${KERNCONFDIR}/${_kernel}
709.endif
710 cd ${KRNLOBJDIR}/${_kernel}; \
f8a75064 711 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
fc7aca3e
MD
712.else
713.if !defined(NO_KERNELCONFIG)
714 cd ${KRNLCONFDIR}; \
715 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
716 ${KERNCONFDIR}/${_kernel}
717.endif
718 cd ${KRNLOBJDIR}/${_kernel}; \
f8a75064 719 make KERNEL=${INSTKERNNAME} all
fc7aca3e
MD
720.endif
721 @echo "--------------------------------------------------------------"
722 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
723 @echo "--------------------------------------------------------------"
724.endfor
725
726
984263bc
MD
727# installkernel
728#
729# Install the kernel defined by INSTALLKERNEL
730#
731installkernel reinstallkernel:
982b0507
MD
732 @echo "--------------------------------------------------------------"
733 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
734 @echo "--------------------------------------------------------------"
735.if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
984263bc 736 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
f8a75064 737 ${IMAKEENV} make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
c2c83759
MD
738.else
739 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
f8a75064 740 make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
c2c83759 741.endif
984263bc 742
984263bc
MD
743#
744# most
745#
746# Build most of the user binaries on the existing system libs and includes.
747#
748most:
749 @echo "--------------------------------------------------------------"
750 @echo ">>> Building programs only"
751 @echo "--------------------------------------------------------------"
752.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
f8a75064 753 cd ${.CURDIR}/${_dir}; make DIRPRFX=${_dir}/ all
984263bc
MD
754.endfor
755
756#
757# installmost
758#
759# Install the binaries built by the 'most' target. This does not include
760# libraries or include files.
761#
762installmost:
763 @echo "--------------------------------------------------------------"
764 @echo ">>> Installing programs only"
765 @echo "--------------------------------------------------------------"
766.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
f8a75064 767 cd ${.CURDIR}/${_dir}; make DIRPRFX=${_dir}/ install
984263bc
MD
768.endfor
769
770#
771# ------------------------------------------------------------------------
772#
773# From here onwards are utility targets used by the 'make world' and
774# related targets. If your 'world' breaks, you may like to try to fix
775# the problem and manually run the following targets to attempt to
776# complete the build. Beware, this is *not* guaranteed to work, you
777# need to have a pretty good grip on the current state of the system
778# to attempt to manually finish it. If in doubt, 'make world' again.
779#
780
79aa78bc
MD
781# bootstrap-tools: Build all tools required to build all tools. Note that
782# order is important in a number of cases and also note that the bootstrap
783# and build tools stages have access to earlier binaries they themselves
784# had generated.
984263bc 785#
79aa78bc
MD
786# patch: older patch's do not have -i. This program must be built
787# first so other bootstrap tools that need to apply patches
788# can use it.
17030342
MD
789# [x]install: dependancies on various new install features
790# rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
791# envs are not compatible with older objformat binaries.
792#
cecff5c1 793.if exists(${.CURDIR}/games) && !defined(NO_GAMES)
984263bc
MD
794_strfile= games/fortune/strfile
795.endif
796
e92bae40
MD
797# BSTRAPDIRS1 - must be built in strict order, no parallelism
798#
f3dd7aaa
MD
799# order is very important. yacc before m4 before flex. flex exec's m4,
800# m4's parser file needs the latest byacc (insanity!).
801#
e92bae40 802BSTRAPDIRS1= ${_strfile} \
d2e9c9d8
MD
803 usr.bin/patch \
804 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo \
805 bin/test bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
806 bin/hostname bin/kill \
f3dd7aaa
MD
807 usr.bin/yacc usr.bin/m4 usr.bin/colldef \
808 usr.bin/uudecode usr.bin/xinstall \
809 usr.bin/rpcgen usr.bin/bmake usr.bin/awk usr.bin/stat \
e92bae40
MD
810 usr.bin/find usr.bin/flex
811
812# BSTRAPDIRS2 - may built in parallel
813#
814BSTRAPDIRS2= \
815 usr.bin/sed usr.bin/uname usr.bin/touch \
d2e9c9d8
MD
816 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
817 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
818 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
819 usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
820 usr.bin/cap_mkdb usr.bin/true usr.bin/false \
821 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
8c4a123d 822 usr.bin/tail usr.bin/unifdef usr.bin/tic \
d2e9c9d8
MD
823 usr.sbin/chown usr.sbin/mtree usr.sbin/config \
824 usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \
825 gnu/usr.bin/texinfo gnu/usr.bin/grep usr.bin/sort \
6fc6ffe8
FT
826 usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb \
827 usr.bin/crunch
d2e9c9d8 828
e92bae40 829bootstrap-tools: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
d2e9c9d8
MD
830 touch ${BTOOLSDEST}/.bootstrap_done
831
832bootstrap-tools-before:
062db326 833 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
d2e9c9d8 834
e92bae40
MD
835bootstrap-tools-targets1: ${BSTRAPDIRS1:S/^/bstrap-/}
836
837bootstrap-tools-targets2: ${BSTRAPDIRS2:S/^/bstrap-/}
838
839.ORDER: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
d2e9c9d8 840
e92bae40 841.ORDER: ${BSTRAPDIRS1:S/^/bstrap-/}
d2e9c9d8 842
e92bae40 843.for _tool in ${BSTRAPDIRS1} ${BSTRAPDIRS2}
d2e9c9d8 844bstrap-${_tool}!
1397f94a 845 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
984263bc 846 cd ${.CURDIR}/${_tool}; \
f8a75064
JM
847 make DIRPRFX=${_tool}/ obj; \
848 make DIRPRFX=${_tool}/ depend; \
849 make DIRPRFX=${_tool}/ all; \
850 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
984263bc
MD
851.endfor
852
bceb727e 853# build-tools: Build special purpose build tools.
984263bc 854#
1397f94a
MD
855# XXX we may be able to remove or consolidate this into bootstrap-tools
856# now that we have the native helper (.nx/.no) infrastructure.
857#
cecff5c1 858.if exists(${.CURDIR}/share) && !defined(NO_SHARE)
984263bc
MD
859_share= share/syscons/scrnmaps
860.endif
861
f0140465 862_gcc_common_cross= gnu/usr.bin/gmp gnu/usr.bin/mpfr
6100d1de 863.if !defined(NO_GCC44)
f0140465 864_gcc44_cross= gnu/usr.bin/cc44
4f5ea479 865_gcc44_tools= gnu/usr.bin/cc44/cc_prep gnu/usr.bin/cc44/cc_tools
6100d1de 866.endif
ce38cc15 867_gcc47_cross= lib/libz gnu/usr.bin/mpc gnu/usr.bin/cc47
f0140465 868_gcc47_tools= gnu/usr.bin/cc47/cc_prep gnu/usr.bin/cc47/cc_tools
c97b9141 869_custom_cross= libexec/customcc
123dec51 870_binutils= gnu/usr.bin/${WORLD_BINUTILSVER}
17030342 871
f0140465 872BTOOLSDIRS= ${_gcc44_tools} ${_gcc47_tools} ${_share}
d2e9c9d8
MD
873
874build-tools: build-tools-targets
875 touch ${BTOOLSDEST}/.build_done
876
877build-tools-targets: ${BTOOLSDIRS:S/^/btools-/}
878
9ba72882 879.ORDER: ${_gcc44_tools:S/^/btools-/}
f0140465 880.ORDER: ${_gcc47_tools:S/^/btools-/}
9ba72882 881
d2e9c9d8
MD
882.for _tool in ${BTOOLSDIRS}
883btools-${_tool}!
1397f94a 884 ${ECHODIR} "===> ${_tool} (build-tools)"; \
984263bc 885 cd ${.CURDIR}/${_tool}; \
f8a75064
JM
886 make DIRPRFX=${_tool}/ obj; \
887 make DIRPRFX=${_tool}/ depend; \
888 make DIRPRFX=${_tool}/ all; \
889 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
984263bc
MD
890.endfor
891
892#
893# cross-tools: Build cross-building tools
894#
984263bc
MD
895.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
896_btxld= usr.sbin/btxld
897.endif
898
fc7e83fa
FT
899CTOOLSDIRS= ${_btxld} ${_binutils} \
900 usr.bin/objformat usr.bin/crunch/crunchide \
901 ${_gcc_common_cross} \
f0140465 902 ${_gcc44_cross} ${_gcc47_cross} ${_custom_cross}
d2e9c9d8
MD
903
904cross-tools: cross-tools-targets
905 touch ${CTOOLSDEST}/.cross_done
906
907cross-tools-targets: ${CTOOLSDIRS:S/^/ctools-/}
908
909.for _tool in ${CTOOLSDIRS}
910ctools-${_tool}!
1397f94a 911 ${ECHODIR} "===> ${_tool} (cross-tools)"; \
984263bc 912 cd ${.CURDIR}/${_tool}; \
f8a75064
JM
913 make DIRPRFX=${_tool}/ obj; \
914 make DIRPRFX=${_tool}/ depend; \
915 make DIRPRFX=${_tool}/ all; \
916 make DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
984263bc
MD
917.endfor
918
919#
920# hierarchy - ensure that all the needed directories are present
921#
922hierarchy:
f8a75064 923 cd ${.CURDIR}/etc; make distrib-dirs
984263bc
MD
924
925#
926# libraries - build all libraries, and install them under ${DESTDIR}.
927#
928# The list of libraries with dependents (${_prebuild_libs}) and their
929# interdependencies (__L) are built automatically by the
930# ${.CURDIR}/tools/make_libdeps.sh script.
931#
5228fe46
MD
932# .makeenv does not work when bootstrapping from 4.x, so we must be sure
933# to specify the correct CCVER or 'cc' will not exec the correct compiler.
934#
984263bc 935libraries:
ddf7cc86 936 cd ${.CURDIR}; \
f0140465 937 HOST_CCVER=${HOST_CCVER} CCVER=gcc47 \
f8a75064 938 make -f Makefile.inc1 _startup_libs47;
6100d1de 939.if !defined(NO_GCC44)
4f5ea479
SS
940 cd ${.CURDIR}; \
941 HOST_CCVER=${HOST_CCVER} CCVER=gcc44 \
f8a75064 942 make -f Makefile.inc1 _startup_libs44;
6100d1de 943.endif
29d48e65 944 cd ${.CURDIR}; \
f8a75064
JM
945 make -f Makefile.inc1 _startup_libs; \
946 make -f Makefile.inc1 _prebuild_libs; \
947 make -f Makefile.inc1 _generic_libs;
e05c8c84 948 touch ${WORLDDEST}/.libraries_done
984263bc
MD
949
950# These dependencies are not automatically generated:
951#
fd8b66cd 952# gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
4f5ea479
SS
953# shared libraries for ELF. The target for _startup_libsXX is
954# specifically built using gccXX.
984263bc 955#
64ed7155
JM
956_startup_libs47= gnu/usr.bin/cc47/cc_prep \
957 gnu/usr.bin/cc47/cc_tools \
958 gnu/lib/gcc47/csu \
f0140465
JM
959 gnu/lib/gcc47/libgcc \
960 gnu/lib/gcc47/libgcc_eh \
961 gnu/lib/gcc47/libgcc_pic
64ed7155
JM
962_startup_libs44= gnu/usr.bin/cc44/cc_prep \
963 gnu/usr.bin/cc44/cc_tools \
964 gnu/lib/gcc44/csu \
965 gnu/lib/gcc44/libgcc
e1da6819 966_startup_libs= lib/csu lib/libc lib/libc_rtld
984263bc 967
59392a00 968_prebuild_libs= lib/libbz2 lib/liblzma lib/libz
0b153c05 969_prebuild_libs+= lib/libutil
984263bc
MD
970
971_generic_libs= gnu/lib
972
984263bc 973_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
6d0e03f5 974 lib/libncurses/libncurses lib/libopie
984263bc
MD
975
976lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
984263bc
MD
977
978_generic_libs+= lib
979
cecff5c1 980.if !defined(NO_CRYPT)
984263bc
MD
981.if !defined(NO_OPENSSL)
982_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl
983.if !defined(NO_OPENSSH)
984_prebuild_libs+= secure/lib/libssh
985secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
986.endif
987.endif
988_generic_libs+= secure/lib
989.endif
990
6d0e03f5
MD
991_prebuild_libs+= lib/libradius lib/libsbuf lib/libtacplus lib/libm \
992 lib/libpam lib/libypclnt lib/lib${THREAD_LIB} \
993 lib/libpthread lib/libprop lib/libdevattr
994
f506e60d 995_generic_libs+= usr.bin/flex/lib
984263bc 996
f0140465 997.for _lib in ${_startup_libs44} ${_startup_libs47} \
4db2a28c 998 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
984263bc
MD
999${_lib}__L: .PHONY
1000.if exists(${.CURDIR}/${_lib})
1001 ${ECHODIR} "===> ${_lib}"; \
1002 cd ${.CURDIR}/${_lib}; \
f8a75064
JM
1003 make DIRPRFX=${_lib}/ depend; \
1004 make DIRPRFX=${_lib}/ all; \
1005 make DIRPRFX=${_lib}/ install
984263bc
MD
1006.endif
1007.endfor
1008
1009_startup_libs: ${_startup_libs:S/$/__L/}
f0140465 1010_startup_libs47: ${_startup_libs47:S/$/__L/}
4f5ea479 1011_startup_libs44: ${_startup_libs44:S/$/__L/}
984263bc
MD
1012_prebuild_libs: ${_prebuild_libs:S/$/__L/}
1013_generic_libs: ${_generic_libs:S/$/__L/}
1014
1397f94a
MD
1015# library targets must be ordered because there are inter-library
1016# races (e.g. generation of tconfig.h)
1017#
f0140465 1018.ORDER: ${_startup_libs47:S/$/__L/}
4f5ea479 1019.ORDER: ${_startup_libs44:S/$/__L/}
1397f94a
MD
1020.ORDER: ${_startup_libs:S/$/__L/}
1021.ORDER: ${_prebuild_libs:S/$/__L/}
1022.ORDER: ${_generic_libs:S/$/__L/}
1023
1024.for __target in clean cleandepend cleandir obj depend includes
984263bc
MD
1025.for entry in ${SUBDIR}
1026${entry}.${__target}__D: .PHONY
1027 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
1028 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
1029 edir=${entry}.${MACHINE_ARCH}; \
1030 cd ${.CURDIR}/$${edir}; \
1031 else \
1032 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
1033 edir=${entry}; \
1034 cd ${.CURDIR}/$${edir}; \
1035 fi; \
f8a75064 1036 make ${__target} DIRPRFX=${DIRPRFX}$${edir}/
984263bc
MD
1037.endfor
1038par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
1397f94a 1039.ORDER: ${SUBDIR:S/$/.${__target}__D/}
984263bc 1040.endfor
1397f94a 1041.ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
984263bc 1042
cb0f1574
MD
1043# The wmake target is used by /usr/bin/wmake to run make in a
1044# world build environment.
1045#
1046wmake:
f8a75064 1047 @echo '${WMAKEENV} make ${WMAKE_ARGS}'
cb0f1574 1048
5c7da0d7
MD
1049wmakeenv:
1050 @echo '${WMAKEENV} /bin/sh'
1051
1397f94a 1052bmake:
f8a75064 1053 @echo '${BMAKEENV} make ${BMAKE_ARGS}'
1397f94a 1054
17030342
MD
1055bmakeenv:
1056 @echo '${BMAKEENV} /bin/sh'
1057
1397f94a 1058tmake:
f8a75064 1059 @echo '${TMAKEENV} make ${TMAKE_ARGS}'
1397f94a 1060
17030342
MD
1061tmakeenv:
1062 @echo '${TMAKEENV} /bin/sh'
1063
66834c05 1064xmake:
f8a75064 1065 @echo '${XMAKEENV} make ${XMAKE_ARGS}'
66834c05
SS
1066
1067xmakeenv:
1068 @echo '${XMAKEENV} /bin/sh'
1069
2decc9b9 1070backupworld: backup-clean
7bee86c0 1071 @mkdir -p ${WORLD_BACKUP}
2decc9b9
JM
1072.if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1073 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1074 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1075 tar -czf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1076 --options gzip:compression-level=1 \
1077 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1078.endif
61443441
JM
1079
1080backupworld-auto:
2decc9b9
JM
1081.if !defined(NO_BACKUP)
1082 rm -f ${AUTO_BACKUP}/binaries.tar.gz
61443441 1083 @mkdir -p ${AUTO_BACKUP}
2decc9b9
JM
1084.if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1085 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1086 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1087 tar -czf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1088 --options gzip:compression-level=1 \
1089 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1090.endif
aaae54f7 1091.endif
7bee86c0 1092
2decc9b9
JM
1093backup-auto-clean:
1094 rm -f ${AUTO_BACKUP}/binaries.tar.gz
1095
1096backup-clean:
1097 rm -f ${WORLD_BACKUP}/binaries.tar.gz
1098
7bee86c0 1099restoreworld:
2decc9b9 1100.if !exists(${WORLD_BACKUP}/binaries.tar.gz)
7bee86c0
JM
1101 @echo "There does not seem to be a valid archive present."
1102.else
61443441 1103 @echo "Restoring system binaries from manual backup archive..."
2decc9b9
JM
1104 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1105 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1106 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1107 tar -xzf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
7bee86c0
JM
1108.endif
1109
61443441 1110restoreworld-auto:
2decc9b9 1111.if !exists(${AUTO_BACKUP}/binaries.tar.gz)
61443441
JM
1112 @echo "There does not seem to be a valid archive present."
1113.else
1114 @echo "Restoring system binaries from auto-backup archive..."
2decc9b9
JM
1115 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1116 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1117 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1118 tar -xzf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
61443441
JM
1119.endif
1120
3da8e88f
JM
1121# Take advantage of bmake error response
1122#
1123MAKE_PRINT_VAR_ON_ERROR= \
1124 .CURDIR \
1125 .OBJDIR \
3da8e88f
JM
1126 LD_LIBRARY_PATH \
1127 MACHINE_ARCH \
1128 MACHINE \
1129 MAKEFILE \
1130 .TARGETS \
1131 .ERROR_TARGET \
61443441 1132 .MAKE.LEVEL
3da8e88f 1133
984263bc 1134.include <bsd.subdir.mk>