Say hello to a sound system update from FreeBSD. This includes the long
[dragonfly.git] / sys / dev / sound / isa / sb.h
1 /*
2  * file: sbcard.h
3  * $FreeBSD: src/sys/dev/sound/isa/sb.h,v 1.15 2004/05/13 11:32:54 truckman Exp $
4  * $DragonFly: src/sys/dev/sound/isa/sb.h,v 1.3 2007/01/04 21:47:02 corecode Exp $
5  */
6
7 #ifndef SB_H
8 #define SB_H
9
10 struct sbc_softc;
11 void sbc_lock(struct sbc_softc *);
12 void sbc_lockassert(struct sbc_softc *);
13 void sbc_unlock(struct sbc_softc *);
14
15 /*
16  * sound blaster registers
17  */
18
19 #define SBDSP_RST       0x6
20 #define DSP_READ        0xA
21 #define DSP_WRITE       0xC
22 #define SBDSP_CMD       0xC
23 #define SBDSP_STATUS    0xC
24 #define DSP_DATA_AVAIL  0xE
25 #define DSP_DATA_AVL16  0xF
26
27 #define SB_MIX_ADDR     0x4
28 #define SB_MIX_DATA     0x5
29 #if 0
30 #define OPL3_LEFT       (io_base + 0x0)
31 #define OPL3_RIGHT      (io_base + 0x2)
32 #define OPL3_BOTH       (io_base + 0x8)
33 #endif
34
35 /*
36  * DSP Commands. There are many, and in many cases they are used explicitly
37  */
38
39 /* these are not used except for programmed I/O (not in this driver) */
40 #define DSP_DAC8                0x10    /* direct DAC output */
41 #define DSP_ADC8                0x20    /* direct ADC input */
42
43 /* these should be used in the SB 1.0 */
44 #define DSP_CMD_DAC8            0x14    /* single cycle 8-bit dma out */
45 #define DSP_CMD_ADC8            0x24    /* single cycle 8-bit dma in */
46
47 /* these should be used in the SB 2.0 and 2.01 */
48 #define DSP_CMD_DAC8_AUTO       0x1c    /* auto 8-bit dma out */
49 #define DSP_CMD_ADC8_AUTO       0x2c    /* auto 8-bit dma out */
50
51 #define DSP_CMD_HSSIZE          0x48    /* high speed dma count */
52 #define DSP_CMD_HSDAC_AUTO      0x90    /* high speed dac, auto */
53 #define DSP_CMD_HSADC_AUTO      0x98    /* high speed adc, auto */
54
55 /* SBPro commands. Some cards (JAZZ, SMW) also support 16 bits */
56
57         /* prepare for dma input */
58 #define DSP_CMD_DMAMODE(stereo, bit16) (0xA0 | (stereo ? 8:0) | (bit16 ? 4:0))
59
60 #define DSP_CMD_DAC2            0x16    /* 2-bit adpcm dma out (cont) */
61 #define DSP_CMD_DAC2S           0x17    /* 2-bit adpcm dma out (start) */
62
63 #define DSP_CMD_DAC2S_AUTO      0x1f    /* auto 2-bit adpcm dma out (start) */
64
65
66 /* SB16 commands */
67 #define DSP_CMD_O16             0xb0
68 #define DSP_CMD_I16             0xb8
69 #define DSP_CMD_O8              0xc0
70 #define DSP_CMD_I8              0xc8
71
72 #define DSP_MODE_U8MONO         0x00
73 #define DSP_MODE_U8STEREO       0x20
74 #define DSP_MODE_S16MONO        0x10
75 #define DSP_MODE_S16STEREO      0x30
76
77 #define DSP_CMD_SPKON           0xD1
78 #define DSP_CMD_SPKOFF          0xD3
79 #define DSP_CMD_SPKR(on)        (0xD1 | (on ? 0:2))
80
81 #define DSP_CMD_DMAPAUSE_8      0xD0
82 #define DSP_CMD_DMAPAUSE_16     0xD5
83 #define DSP_CMD_DMAEXIT_8       0xDA
84 #define DSP_CMD_DMAEXIT_16      0xD9
85 #define DSP_CMD_TCONST          0x40    /* set time constant */
86 #define DSP_CMD_HSDAC           0x91    /* high speed dac */
87 #define DSP_CMD_HSADC           0x99    /* high speed adc */
88
89 #define DSP_CMD_GETVER          0xE1
90 #define DSP_CMD_GETID           0xE7    /* return id bytes */
91
92
93 #define DSP_CMD_OUT16           0x41    /* send parms for dma out on sb16 */
94 #define DSP_CMD_IN16            0x42    /* send parms for dma in on sb16 */
95 #if 0 /*** unknown ***/
96 #define DSP_CMD_FA              0xFA    /* get version from prosonic*/
97 #define DSP_CMD_FB              0xFB    /* set irq/dma for prosonic*/
98 #endif
99
100 /*
101  * in fact, for the SB16, dma commands are as follows:
102  *
103  *  cmd, mode, len_low, len_high.
104  *
105  * cmd is a combination of DSP_DMA16 or DSP_DMA8 and
106  */
107
108 #define DSP_DMA16               0xb0
109 #define DSP_DMA8                0xc0
110 #   define DSP_F16_DAC          0x00
111 #   define DSP_F16_ADC          0x08
112 #   define DSP_F16_AUTO         0x04
113 #   define DSP_F16_FIFO_ON      0x02
114
115 /*
116  * mode is a combination of the following:
117  */
118 #define DSP_F16_STEREO  0x20
119 #define DSP_F16_SIGNED  0x10
120
121 #define IMODE_NONE              0
122 #define IMODE_OUTPUT            PCM_ENABLE_OUTPUT
123 #define IMODE_INPUT             PCM_ENABLE_INPUT
124 #define IMODE_INIT              3
125 #define IMODE_MIDI              4
126
127 #define NORMAL_MIDI     0
128 #define UART_MIDI       1
129
130 /*
131  * values used for bd_flags in SoundBlaster driver
132  */
133 #define BD_F_HISPEED    0x0001  /* doing high speed ... */
134
135 #if 0
136 #define BD_F_JAZZ16     0x0002  /* jazz16 detected */
137 #define BD_F_JAZZ16_2   0x0004  /* jazz16 type 2 */
138 #endif
139
140 #define BD_F_DUP_MIDI   0x0008  /* duplex midi */
141
142 #define BD_F_MIX_MASK   0x0070  /* up to 8 mixers (I know of 3) */
143 #define BD_F_MIX_CT1335 0x0010  /* CT1335               */
144 #define BD_F_MIX_CT1345 0x0020  /* CT1345               */
145 #define BD_F_MIX_CT1745 0x0030  /* CT1745               */
146
147 #define BD_F_SB16       0x0100  /* this is a SB16 */
148 #define BD_F_SB16X      0x0200  /* this is a vibra16X or clone */
149 #if 0
150 #define BD_F_MIDIBUSY   0x0400  /* midi busy */
151 #endif
152 #define BD_F_ESS        0x0800  /* this is an ESS chip */
153 #define BD_F_DMARUN     0x2000
154 #define BD_F_DMARUN2    0x4000
155
156 /*
157  * Mixer registers of SB Pro
158  */
159 #define VOC_VOL         0x04
160 #define MIC_VOL         0x0A
161 #define MIC_MIX         0x0A
162 #define RECORD_SRC      0x0C
163 #define IN_FILTER       0x0C
164 #define OUT_FILTER      0x0E
165 #define MASTER_VOL      0x22
166 #define FM_VOL          0x26
167 #define CD_VOL          0x28
168 #define LINE_VOL        0x2E
169 #define IRQ_NR          0x80
170 #define DMA_NR          0x81
171 #define IRQ_STAT        0x82
172
173 /*
174  * Additional registers on the SG NX Pro
175  */
176 #define COVOX_VOL       0x42
177 #define TREBLE_LVL      0x44
178 #define BASS_LVL        0x46
179
180 #define FREQ_HI         (1 << 3)/* Use High-frequency ANFI filters */
181 #define FREQ_LOW        0       /* Use Low-frequency ANFI filters */
182 #define FILT_ON         0       /* Yes, 0 to turn it on, 1 for off */
183 #define FILT_OFF        (1 << 5)
184
185 #define MONO_DAC        0x00
186 #define STEREO_DAC      0x02
187
188 /*
189  * Mixer registers of SB16
190  */
191 #define SB16_IMASK_L    0x3d
192 #define SB16_IMASK_R    0x3e
193 #define SB16_OMASK      0x3c
194 #endif