4 # This is rc.conf - a file full of useful variables that you can set
5 # to change the default startup behavior of your system. You should
6 # not edit this file! Put any overrides into one of the ${rc_conf_files}
7 # instead and you will be able to update these defaults later without
8 # spamming your local configuration information.
10 # The ${rc_conf_files} files should only contain values which override
11 # values set in this file. This eases the upgrade path when defaults
12 # are changed and new features are added.
14 # All arguments must be in double or single quotes.
16 # $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $
18 ##############################################################
19 ### Important initial Boot-time options ####################
20 ##############################################################
22 rc_debug="NO" # Set to YES to enable debugging output from rc.d
23 rc_info="YES" # Enables display of informational messages at boot.
24 rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
25 swapfile="NO" # Set to name of swapfile if aux swapfile desired.
26 apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
27 apmd_enable="NO" # Run apmd to handle APM event from userland.
28 apmd_flags="" # Flags to apmd (if enabled).
29 battd_enable="NO" # Set to YES to have battd alert on 10% battery power remaining.
30 battd_flags="" # Flags to battd (if enabled).
31 powerd_enable="NO" # Run powerd to adjust CPU speed.
32 sensorsd_enable="NO" # Run sensorsd to monitor and log sensor state changes.
33 sensorsd_flags="" # additional flags for sensorsd(8).
34 hotplugd_enable="NO" # Run hotplugd to monitor devices hot plugging.
35 hotplugd_flags="" # additional flags for hotplugd(8)
36 pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
37 pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether
38 removable_interfaces="" # Removable network interfaces for /etc/pccard_ether.
39 local_startup="/usr/local/etc/rc.d /usr/pkg/etc/rc.d"
40 # startup script dirs.
41 script_name_sep=" " # Change if your startup scripts' names contain spaces
42 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
43 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
44 netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL" # Net filesystems.
45 extra_netfs_types="NO" # List of network extra filesystem types for delayed
46 # mount at startup (or NO).
47 devfs_config_files="/etc/defaults/devfs.conf /etc/devfs.conf"
48 # Config files for devfs(5)
50 ##############################################################
51 ### Network configuration sub-section ######################
52 ##############################################################
54 ### Basic network and firewall/security options: ###
56 # see 'man firewall' for an explanation of the default firewall rules
58 hostname="" # Set this!
59 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
60 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
61 dhclient_flags="" # Additional flags to pass to dhcp client.
62 firewall_enable="NO" # Set to YES to enable firewall functionality
63 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
64 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
65 firewall_trusted_nets="192.168.0.0/16" # list of trusted nets
66 firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0"
67 firewall_allowed_icmp_types="0 3 8 11 12 13 14"
68 firewall_open_tcp_ports="22 25 53 80 113 443"
69 firewall_open_udp_ports="53"
70 firewall_quiet="NO" # Set to YES to suppress rule display
71 firewall_logging="NO" # Set to YES to enable events logging
72 firewall_flags="" # Flags passed to ipfw when type is a file
73 ip_portrange_first="NO" # Set first dynamically allocated port
74 ip_portrange_last="NO" # Set last dynamically allocated port
75 ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
76 ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
77 natd_program="/sbin/natd" # path to natd, if you want a different one.
78 natd_enable="NO" # Enable natd (if firewall_enable == YES).
79 natd_interface="" # Public interface or IPaddress to use.
80 natd_flags="" # Additional flags for natd.
81 pf_enable="NO" # Set to YES to enable packet filter (pf)
82 pf_rules="/etc/pf.conf" # rules definition file for pf
83 pf_program="/usr/sbin/pfctl" # where the pfctl program lives
84 pf_flags="" # additional flags for pfctl
85 pflog_enable="NO" # Set to YES to enable packet filter logging
86 pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
87 pflog_program="/usr/sbin/pflogd" # where the pflogd program lives
88 pflog_flags="" # additional flags for pflogd
89 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
90 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
91 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
92 # For the following option you need to have TCP_DROP_SYNFIN set in your
93 # kernel. Please refer to LINT and NOTES for details.
94 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
95 # NOTE: this violates the TCP specification
96 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
97 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
98 network_interfaces="auto" # List of network interfaces (or "auto").
99 cloned_interfaces="" # List of cloned network interfaces to create.
100 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
101 ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
102 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
103 #ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
105 # If you have any sppp(4) interfaces above, you might also want to set
106 # the following parameters. Refer to spppcontrol(8) for their meaning.
107 sppp_interfaces="" # List of sppp interfaces.
108 #sppp_interfaces="...0" # example: sppp over ...
109 #spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
110 gif_interfaces="NO" # List of GIF tunnels (or "NO").
111 #gif_interfaces="gif0 gif1" # Examples typically for a router.
112 # Choose correct tunnel addrs.
113 #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
114 #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
116 # User ppp configuration.
117 ppp_enable="NO" # Start user-ppp (or NO).
118 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
119 # For details see man page for ppp(8). Default is auto.
120 ppp_nat="YES" # Use PPP's internal network address translation or NO.
121 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
122 ppp_user="root" # Which user to run ppp as
124 ### Network daemon (miscellaneous) ###
125 hostapd_enable="NO" # Run hostap daemon.
126 syslogd_enable="YES" # Run syslog daemon (or NO).
127 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
128 #syslogd_flags="-s" # Flags to syslogd (if enabled).
129 syslogd_flags="-ss" # Syslogd flags to not bind an inet socket
130 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
131 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
132 inetd_flags="-wW" # Optional flags to inetd
134 rwhod_enable="NO" # Run the rwho daemon (or NO).
135 rwhod_flags="" # Flags for rwhod
136 rarpd_enable="NO" # Run rarpd (or NO).
137 rarpd_flags="" # Flags to rarpd.
138 bootparamd_enable="NO" # Run bootparamd (or NO).
139 bootparamd_flags="" # Flags to bootparamd
140 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
141 pppoed_provider="*" # Provider and ppp(8) config file entry.
142 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
143 pppoed_interface="fxp0" # The interface that pppoed runs on.
144 sshd_enable="NO" # Enable sshd
145 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
146 sshd_flags="" # Additional flags for sshd.
148 ftpd_enable="NO" # Run stand-alone ftp daemon (or NO).
149 ftpd_flags="" # Flags for ftpd, -D added implicitly.
151 ### Network File System (NFS): ###
152 ### Server-side options also need rpcbind_enable="YES" ###
154 ### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If
155 ### the mtime matches the data cache is left intact.
157 amd_enable="NO" # Run amd service with $amd_flags (or NO).
158 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
159 amd_map_program="NO" # Can be set to "ypcat -k amd.master"
160 nfs_client_enable="NO" # This host is an NFS client (or NO).
161 nfs_access_cache="5" # Client attribute cache timeout in seconds
162 #nfs_neg_cache="3" # Client attribute negative hit cache timeout
163 nfs_server_enable="NO" # This host is an NFS server (or NO).
164 nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
165 mountd_enable="NO" # Run mountd (or NO).
166 mountd_flags="-r" # Flags to mountd (if NFS server enabled).
167 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
168 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
169 nfs_bufpackets="" # bufspace (in packets) for client
170 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
171 rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
172 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
173 rpc_statd_flags="" # Flags to rpc.statd (if enabled).
174 rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown
175 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
176 rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
177 rpcbind_flags="" # Flags to rpcbind (if enabled).
178 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
179 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
180 keyserv_flags="" # Flags to keyserv (if enabled).
182 ### Network Time Services options: ###
183 timed_enable="NO" # Run the time daemon (or NO).
184 timed_flags="" # Flags to timed (if enabled).
185 dntpd_enable="NO" # Run dntpd Network Time Protocol (or NO).
186 dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one.
187 dntpd_flags="" # Flags to dntpd (if enabled) also server name(s)
189 # Bluetooth deamons and options:
190 btconfig_enable="NO" # Configure Bluetooth devices (or NO).
191 btconfig_devices="" # List of Bluetooth devices (or empty for all).
192 #btconfig_<device>="" # Parameters to pass to <device>.
193 btconfig_args="" # Parameters to pass to all devices.
194 sdpd_enable="NO" # Run the Service Discovery Profile daemon (or NO).
195 sdpd_flags="" # Flags to sdpd (if enabled).
196 bthcid_enable="NO" # Run the Bluetooth Link Key/PIN Code Manager (or NO).
197 bthcid_flags="" # Flags to bthcid (if enabled).
199 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
200 nis_client_enable="NO" # We're an NIS client (or NO).
201 nis_client_flags="" # Flags to ypbind (if enabled).
202 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
203 nis_ypset_flags="" # Flags to ypset (if enabled).
204 nis_server_enable="NO" # We're an NIS server (or NO).
205 nis_server_flags="" # Flags to ypserv (if enabled).
206 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
207 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
208 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
209 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
211 ### Network routing options: ###
212 defaultrouter="NO" # Set to default gateway (or NO).
213 static_routes="" # Set to static route list (or leave empty).
214 gateway_enable="NO" # Set to YES if this host will be a gateway.
215 router_enable="NO" # Set to YES to enable a routing daemon.
216 router_program="/sbin/routed" # Name of routing daemon to use if enabled.
217 router_flags="-q" # Flags for routing daemon.
218 mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
219 mrouted_flags="" # Flags for multicast routing daemon.
220 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
221 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
222 accept_sourceroute="NO" # accept source routed packets to us
224 ### ATM interface options: ###
225 atm_enable="NO" # Configure ATM interfaces (or NO).
226 #atm_netif_hea0="atm 1" # Network interfaces for physical interface.
227 #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
228 #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
229 #atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
230 #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
231 #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
232 atm_arps="" # Set to permanent ARP list (or leave empty).
234 ### Miscellaneous network options: ###
235 icmp_bmcastecho="NO" # respond to broadcast ping packets
237 ### IPv6 options: ###
238 ipv6_enable="NO" # Set to YES to set up for IPv6.
239 ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
240 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
241 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
242 ipv6_static_routes="" # Set to static route list (or leave empty).
243 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
244 # route toward loopback interface.
245 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
246 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
247 ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
248 ipv6_router_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
249 ipv6_router_flags="" # Flags to IPv6 routing daemon.
250 #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
252 #ipv6_router_flags="-q" # If you want to run a routing daemon on an end
253 # node, you should stop advertisement.
254 #ipv6_network_interfaces="ed0 ep0" # Examples for router
255 # or static configuration for end node.
256 # Choose correct prefix value.
257 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
258 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
259 #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
260 #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
261 ipv6_default_interface="NO" # Default output interface for scoped addrs.
262 # Now this works only for IPv6 link local
264 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
265 # advertisement daemon. If set to YES,
266 # this router becomes a possible candidate
267 # IPv6 default router for local subnets.
268 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
269 rtsold_enable="NO" # Set to YES to enable an IPv6 routing
270 # solicitation daemon. This is used for
271 # automatic discovery of non-link local
273 rtsold_flags="-a" # Do autoprobing of outgoing interface.
274 mroute6d_enable="NO" # Do IPv6 multicast routing.
275 mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
276 # routing daemon. You need to
277 # install it from package or
279 mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
280 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
281 # tunneling interface. Specify this entry
282 # to enable 6to4 interface.
283 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
284 # to limit peer addr range. Effective value
286 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
287 # If you like, you can set "AUTO" for this.
288 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
289 ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
290 # IPv6-to-IPv4 TCP translator. You also need
292 ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
293 # communication. (like ::ffff:a.b.c.d)
294 ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
296 ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
297 ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
298 ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
299 ipv6_firewall_logging="NO" # Set to YES to enable events logging
300 ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
302 ##############################################################
303 ### System console options #################################
304 ##############################################################
306 keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
307 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
308 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
309 keychange="NO" # function keys default values (or NO).
310 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
311 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
312 font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
313 font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
314 font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
315 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
316 saver="NO" # screen saver: Uses /modules/${saver}_saver.ko
317 moused_enable="NO" # Run the mouse daemon.
318 moused_type="auto" # See man page for rc.conf(5) for available settings.
319 moused_port="/dev/psm0" # Set to your mouse port.
320 moused_flags="" # Any additional flags to moused.
321 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
322 # language code table, specify alternative range
323 # start like mousechar_start=3, see vidcontrol(1)
324 vidhistory="" # Set video history buffer size
325 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
326 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
329 ##############################################################
330 ### Mail Transfer Agent (MTA) options ######################
331 ##############################################################
333 mta_start_script="/etc/rc.sendmail"
334 # Script to start your chosen MTA, called by /etc/rc.
335 # Settings for /etc/rc.sendmail:
336 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
337 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
338 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
339 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
340 # Flags for localhost-only MTA
341 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
342 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
343 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
344 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
345 # Flags for sendmail_msp_queue daemon.
346 sendmail_rebuild_aliases="YES" # Run newaliases if necessary (YES/NO).
349 ##############################################################
350 ### Miscellaneous administrative options ###################
351 ##############################################################
353 mixer_enable="NO" # Manage mixer settings across reboots
354 cron_enable="YES" # Run the periodic job daemon.
355 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
356 cron_flags="" # Which options to pass to the cron daemon.
357 lpd_enable="NO" # Run the line printer daemon.
358 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
359 lpd_flags="" # Flags to lpd (if enabled).
360 nscd_enable="NO" # Run the nsswitch caching daemon.
361 usbd_enable="NO" # Run the usbd daemon.
362 usbd_flags="" # Flags to usbd (if enabled).
363 devd_enable="YES" # Run devd, to trigger programs on device tree changes.
364 devd_flags="" # Additional flags for devd(8).
365 dumpdev="NO" # Device name to crashdump to (or NO).
366 dumpdir="/var/crash" # Directory where crash dumps are to be stored
367 savecore_flags="" # Used if dumpdev is enabled above, and present.
368 crashinfo_enable="YES" # Automatically generate crash dump summary.
369 crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
370 enable_quotas="NO" # turn on quotas on startup (or NO).
371 check_quotas="YES" # Check quotas on startup (or NO).
372 accounting_enable="NO" # Turn on process accounting (or NO).
373 sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
374 sysvipcd_enable="NO" # Run the System V IPC daemon at startup (or NO).
375 linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
376 clear_tmp_enable="NO" # Clear /tmp at startup.
377 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
378 ldconfig_paths="/lib /usr/lib /usr/lib/compat /usr/local/lib /usr/pkg/lib"
379 # shared library search paths
380 ldconfig_local_dirs="/usr/local/libdata/ldconfig"
381 # Local directories with ldconfig configuration files.
382 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
383 update_motd="YES" # update version info in /etc/motd (or NO)
384 start_vinum="NO" # set to YES to start vinum
385 udevd_enable="NO" # Run udevd(8) daemon.
386 udevd_early="NO" # Run udevd(8) daemon early in boot (for lvm).
387 lvm_enable="NO" # Run LVM volume discovery.
388 rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO).
389 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
390 newsyslog_enable="NO" # Run newsyslog at startup.
391 newsyslog_flags="" # Flags to newsyslog (if enabled).
392 resident_enable="NO" # Process /etc/resident.conf
393 varsym_enable="NO" # Process /etc/varsym.conf
394 watchdogd_enable="NO" # Start the software watchdog daemon
396 ##############################################################
397 ### Jail Configuration #######################################
398 ##############################################################
400 jail_enable="NO" # Set to NO to disable starting of any jails
401 jail_list="" # Space separated list of names of jails
402 jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
403 jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
404 jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
407 # To use rc's built-in jail infrastructure create entries for
408 # each jail, specified in jail_list, with the following variables.
410 # - replace 'example' with the jail's name.
411 # - except rootdir, hostname and ip, all of the following variables may be made
412 # global jail variables if you don't specify a jail name (ie. jail_interface).
414 #jail_example_rootdir="/usr/jail/default" # Jail's root directory
415 #jail_example_hostname="default.domain.com" # Jail's hostname
416 #jail_example_ip="192.168.0.10" # Jail's IP number
417 #jail_example_interface="" # Interface to create the IP alias on
418 #jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting
419 #jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping
420 #jail_example_fdesc_enable="NO" # mount fdesc in the jail
421 #jail_example_procfs_enable="NO" # mount procfs in jail
422 #jail_example_devfs_enable="NO" # mount devfs in jail
423 #jail_example_mount_enable="NO" # mount/umount jail's fs
424 #jail_example_fstab="" # fstab(5) for mount/umount
425 #jail_example_flags="-l -U root" # flags for jail(8)
427 ##############################################################
428 ### VFS quota options #######################################
429 ##############################################################
431 vfs_quota_enable="NO" # Set to YES to enable handling of these vfs quota options
432 vfs_quota_sync="" # Space separated list of mount points or "NO"
434 ##############################################################
435 ### VKernel options #########################################
436 ##############################################################
438 vkernel_enable="NO" # Set to YES to enable starting of vkernels
439 vkernel_list="" # Space separated list of names of vkernels
440 #vkernel_bin="/boot/kernel.VKERNEL" # Default path to the vkernel binary
441 #vkernel_kill_timeout="45" # Default timeout before a SIGKILL is issued
443 vknetd_enable="NO" # Bridged networking
444 vknetd_flags="-U" # Bridged networking flags
446 # Create an entry for each vkernel specified in vkernel_list
447 # replacing 'example' by the name of the vkernel.
449 #vkernel_example_bin="/boot/kernel.VKERNEL"
450 # Path to the vkernel binary
451 #vkernel_example_memsize="64m"
452 # Amount of memory for the vkernel
453 #vkernel_example_rootimg_list="/var/vkernel/rootimg.01"
454 # Space separated list of disk images
455 #vkernel_example_iface_list="auto:bridge0"
456 # Optional: space separated list network interfaces for the vkernel
457 #vkernel_example_logfile="/dev/null"
458 # Optional: path to the console log file
459 #vkernel_example_flags="-U"
460 # Optional: aditional flags to start the vkernel with
461 #vkernel_example_kill_timeout="45"
462 # Optional: timeout before SIGKILL is issued when stopping the vkernel
464 ##############################################################
465 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
466 ### scripts to source rc_conf_files overrides safely. ##
467 ##############################################################
469 if [ -z "${source_rc_confs_defined}" ]; then
470 source_rc_confs_defined=yes
472 local i sourced_files
473 for i in ${rc_conf_files}; do
474 case ${sourced_files} in
478 sourced_files="${sourced_files}:$i:"