1 .\" Copyright (c) 1997, 1998, 1999
2 .\" Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
4 .\" Redistribution and use in source and binary forms, with or without
5 .\" modification, are permitted provided that the following conditions
7 .\" 1. Redistributions of source code must retain the above copyright
8 .\" notice, this list of conditions and the following disclaimer.
9 .\" 2. Redistributions in binary form must reproduce the above copyright
10 .\" notice, this list of conditions and the following disclaimer in the
11 .\" documentation and/or other materials provided with the distribution.
12 .\" 3. All advertising materials mentioning features or use of this software
13 .\" must display the following acknowledgement:
14 .\" This product includes software developed by Bill Paul.
15 .\" 4. Neither the name of the author nor the names of any co-contributors
16 .\" may be used to endorse or promote products derived from this software
17 .\" without specific prior written permission.
19 .\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
20 .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 .\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
23 .\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 .\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 .\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 .\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 .\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
29 .\" THE POSSIBILITY OF SUCH DAMAGE.
31 .\" $FreeBSD: src/share/man/man4/sis.4,v 1.6.2.4 2003/02/17 21:20:39 trhodes Exp $
38 .Nd "SiS 900, SiS 7016 and NS DP83815 fast ethernet device driver"
45 driver provides support for PCI ethernet adapters and embedded
46 controllers based on the Silicon Integrated Systems SiS 900
47 and SiS 7016 fast ethernet controller chips, as well as support
48 for adapters based on the National Semiconductor DP83815 (MacPhyter)
49 PCI ethernet controller chip, including the Netgear FA311-TX and
52 The SiS 900 is a 100Mbps ethernet MAC and MII-compliant transceiver
54 It uses a bus master DMA and a scatter/gather
56 The SiS 7016 is similar to the SiS 900 except
57 that it has no internal PHY, requiring instead an external transceiver
58 to be attached to its MII interface.
59 The SiS 900 and SiS 7016 both have a 128-bit multicast hash filter
60 and a single perfect filter entry for the station address.
62 The NS DP83815 is also a 100Mbps ethernet MAC with integrated PHY.
63 The NatSemi chip and the SiS 900 share many of the same features and
64 a fairly similar programming interface, hence both chips are supported
69 driver supports the following media types:
71 .Bl -tag -width 10baseTXUTP
73 Enable autoselection of the media type and options.
74 The user can manually override
75 the autoselected mode by adding media options to
82 option can also be used to select either
88 Set 100Mbps (fast ethernet) operation.
92 option can also be used to select either
101 driver supports the following media options:
103 .Bl -tag -width full-duplex
105 Force full duplex operation
107 Force half duplex operation.
110 For more information on configuring this device, see
114 .It "sis%d: couldn't map ports/memory"
115 A fatal initialization error has occurred.
116 .It "sis%d: couldn't map interrupt"
117 A fatal initialization error has occurred.
118 .It "sis%d: watchdog timeout"
119 The device has stopped responding to the network, or there is a problem with
120 the network connection (e.g. a cable fault).
121 .It "sis%d: no memory for rx list"
122 The driver failed to allocate an mbuf for the receiver ring.
123 .It "sis%d: no memory for tx list"
124 The driver failed to allocate an mbuf for the transmitter ring when
125 allocating a pad buffer or collapsing an mbuf chain into a clusisr.
126 .It "sis%d: chip is in D3 power state -- setting to D0"
127 This message applies only to adapters which support power
129 Some operating systems place the controller in low power
130 mode when shutting down, and some PCI BIOSes fail to bring the chip
131 out of this state before configuring it.
132 The controller loses all of
133 its PCI configuration in the D3 state, so if the BIOS does not set
134 it back to full power mode in time, it will not be able to configure it
136 The driver tries to detect this condition and bring
137 the adapter back to the D0 (full power) state, but this may not be
138 enough to return the driver to a fully operational condition.
140 you see this message at boot time and the driver fails to attach
141 the device as a network interface, you will have to perform a
142 warm boot to have the device properly configured.
144 Note that this condition only occurs when warm booting from another
146 If you power down your system prior to booting
148 the card should be configured correctly.
157 .%T SiS 900 and SiS 7016 datasheets
158 .%O http://www.sis.com.tw
161 .%T NatSemi DP83815 datasheet
162 .%O http://www.national.com
167 device driver first appeared in
172 driver was written by
173 .An Bill Paul Aq wpaul@ee.columbia.edu .