/*- * Copyright (c) 1998, 1999 Nicolas Souchu * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: src/sys/dev/ppbus/ppb_msq.c,v 1.9.2.1 2000/05/24 00:20:57 n_hibma Exp $ * $DragonFly: src/sys/bus/ppbus/ppb_msq.c,v 1.9 2006/12/22 23:12:17 swildner Exp $ * */ #include #include #include #include #include "ppbconf.h" #include "ppb_msq.h" #include "ppbus_if.h" /* msq index (see PPB_MAX_XFER) * These are device modes */ #define COMPAT_MSQ 0x0 #define NIBBLE_MSQ 0x1 #define PS2_MSQ 0x2 #define EPP17_MSQ 0x3 #define EPP19_MSQ 0x4 #define ECP_MSQ 0x5 /* * Device mode to submsq conversion */ static struct ppb_xfer * mode2xfer(device_t bus, struct ppb_device *ppbdev, int opcode) { int index, epp; struct ppb_xfer *table; switch (opcode) { case MS_OP_GET: table = ppbdev->get_xfer; break; case MS_OP_PUT: table = ppbdev->put_xfer; break; default: panic("%s: unknown opcode (%d)", __func__, opcode); } /* retrieve the device operating mode */ switch (ppb_get_mode(bus)) { case PPB_COMPATIBLE: index = COMPAT_MSQ; break; case PPB_NIBBLE: index = NIBBLE_MSQ; break; case PPB_PS2: index = PS2_MSQ; break; case PPB_EPP: switch ((epp = ppb_get_epp_protocol(bus))) { case EPP_1_7: index = EPP17_MSQ; break; case EPP_1_9: index = EPP19_MSQ; break; default: panic("%s: unknown EPP protocol (0x%x)!", __func__, epp); } break; case PPB_ECP: index = ECP_MSQ; break; default: panic("%s: unknown mode (%d)", __func__, ppbdev->mode); } return (&table[index]); } /* * ppb_MS_init() * * Initialize device dependent submicrosequence of the current mode * */ int ppb_MS_init(device_t bus, device_t dev, struct ppb_microseq *loop, int opcode) { struct ppb_device *ppbdev = (struct ppb_device *)device_get_ivars(dev); struct ppb_xfer *xfer = mode2xfer(bus, ppbdev, opcode); xfer->loop = loop; return (0); } /* * ppb_MS_exec() * * Execute any microsequence opcode - expensive * */ int ppb_MS_exec(device_t bus, device_t dev, int opcode, union ppb_insarg param1, union ppb_insarg param2, union ppb_insarg param3, int *ret) { struct ppb_microseq msq[] = { { MS_UNKNOWN, { { MS_UNKNOWN }, { MS_UNKNOWN }, { MS_UNKNOWN } } }, MS_RET(0) }; /* initialize the corresponding microseq */ msq[0].opcode = opcode; msq[0].arg[0] = param1; msq[0].arg[1] = param2; msq[0].arg[2] = param3; /* execute the microseq */ return (ppb_MS_microseq(bus, dev, msq, ret)); } /* * ppb_MS_loop() * * Execute a microseq loop * */ int ppb_MS_loop(device_t bus, device_t dev, struct ppb_microseq *prolog, struct ppb_microseq *body, struct ppb_microseq *epilog, int iter, int *ret) { struct ppb_microseq loop_microseq[] = { MS_CALL(0), /* execute prolog */ MS_SET(MS_UNKNOWN), /* set size of transfer */ /* loop: */ MS_CALL(0), /* execute body */ MS_DBRA(-1 /* loop: */), MS_CALL(0), /* execute epilog */ MS_RET(0) }; /* initialize the structure */ loop_microseq[0].arg[0].p = (void *)prolog; loop_microseq[1].arg[0].i = iter; loop_microseq[2].arg[0].p = (void *)body; loop_microseq[4].arg[0].p = (void *)epilog; /* execute the loop */ return (ppb_MS_microseq(bus, dev, loop_microseq, ret)); } /* * ppb_MS_init_msq() * * Initialize a microsequence - see macros in ppb_msq.h * */ int ppb_MS_init_msq(struct ppb_microseq *msq, int nbparam, ...) { int i; int param, ins, arg, type; __va_list p_list; __va_start(p_list, nbparam); for (i=0; i= PPB_MS_MAXARGS) panic("%s: parameter out of range (0x%x)!", __func__, param); #if 0 kprintf("%s: param = %d, ins = %d, arg = %d, type = %d\n", __func__, param, ins, arg, type); #endif /* properly cast the parameter */ switch (type) { case MS_TYP_INT: msq[ins].arg[arg].i = __va_arg(p_list, int); break; case MS_TYP_CHA: msq[ins].arg[arg].i = (int)__va_arg(p_list, int); break; case MS_TYP_PTR: msq[ins].arg[arg].p = __va_arg(p_list, void *); break; case MS_TYP_FUN: msq[ins].arg[arg].f = __va_arg(p_list, void *); break; default: panic("%s: unknown parameter (0x%x)!", __func__, param); } } return (0); } /* * ppb_MS_microseq() * * Interprete a microsequence. Some microinstructions are executed at adapter * level to avoid function call overhead between ppbus and the adapter */ int ppb_MS_microseq(device_t bus, device_t dev, struct ppb_microseq *msq, int *ret) { struct ppb_data *ppb = (struct ppb_data *)device_get_softc(bus); struct ppb_device *ppbdev = (struct ppb_device *)device_get_ivars(dev); struct ppb_microseq *mi; /* current microinstruction */ int error; struct ppb_xfer *xfer; /* microsequence executed to initialize the transfer */ struct ppb_microseq initxfer[] = { MS_PTR(MS_UNKNOWN), /* set ptr to buffer */ MS_SET(MS_UNKNOWN), /* set transfer size */ MS_RET(0) }; if (ppb->ppb_owner != dev) return (EACCES); #define INCR_PC (mi ++) mi = msq; for (;;) { switch (mi->opcode) { case MS_OP_PUT: case MS_OP_GET: /* attempt to choose the best mode for the device */ xfer = mode2xfer(bus, ppbdev, mi->opcode); /* figure out if we should use ieee1284 code */ if (!xfer->loop) { if (mi->opcode == MS_OP_PUT) { if ((error = PPBUS_WRITE( device_get_parent(bus), (char *)mi->arg[0].p, mi->arg[1].i, 0))) goto error; INCR_PC; continue; } else { panic("%s: IEEE1284 read not supported", __func__); } } /* XXX should use ppb_MS_init_msq() */ initxfer[0].arg[0].p = mi->arg[0].p; initxfer[1].arg[0].i = mi->arg[1].i; /* initialize transfer */ ppb_MS_microseq(bus, dev, initxfer, &error); if (error) goto error; /* the xfer microsequence should not contain any * MS_OP_PUT or MS_OP_GET! */ ppb_MS_microseq(bus, dev, xfer->loop, &error); if (error) goto error; INCR_PC; break; case MS_OP_RET: if (ret) *ret = mi->arg[0].i; /* return code */ return (0); break; default: /* executing microinstructions at ppc level is * faster. This is the default if the microinstr * is unknown here */ if ((error = PPBUS_EXEC_MICROSEQ( device_get_parent(bus), &mi))) goto error; break; } } error: return (error); }