crypto/openssl/ssl/d1_pkt.c

   1 /* ssl/d1_pkt.c */
   2 /*
   3  * DTLS implementation written by Nagendra Modadugu
   4  * (nagendra@cs.stanford.edu) for the OpenSSL project 2005.
   5  */
   6 /* ====================================================================
   7  * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
   8  *
   9  * Redistribution and use in source and binary forms, with or without
  10  * modification, are permitted provided that the following conditions
  11  * are met:
  12  *
  13  * 1. Redistributions of source code must retain the above copyright
  14  *    notice, this list of conditions and the following disclaimer.
  15  *
  16  * 2. Redistributions in binary form must reproduce the above copyright
  17  *    notice, this list of conditions and the following disclaimer in
  18  *    the documentation and/or other materials provided with the
  19  *    distribution.
  20  *
  21  * 3. All advertising materials mentioning features or use of this
  22  *    software must display the following acknowledgment:
  23  *    "This product includes software developed by the OpenSSL Project
  24  *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
  25  *
  26  * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
  27  *    endorse or promote products derived from this software without
  28  *    prior written permission. For written permission, please contact
  29  *    openssl-core@openssl.org.
  30  *
  31  * 5. Products derived from this software may not be called "OpenSSL"
  32  *    nor may "OpenSSL" appear in their names without prior written
  33  *    permission of the OpenSSL Project.
  34  *
  35  * 6. Redistributions of any form whatsoever must retain the following
  36  *    acknowledgment:
  37  *    "This product includes software developed by the OpenSSL Project
  38  *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
  39  *
  40  * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
  41  * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  42  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  43  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
  44  * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  45  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  46  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  47  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  48  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  49  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  50  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
  51  * OF THE POSSIBILITY OF SUCH DAMAGE.
  52  * ====================================================================
  53  *
  54  * This product includes cryptographic software written by Eric Young
  55  * (eay@cryptsoft.com).  This product includes software written by Tim
  56  * Hudson (tjh@cryptsoft.com).
  57  *
  58  */
  59 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
  60  * All rights reserved.
  61  *
  62  * This package is an SSL implementation written
  63  * by Eric Young (eay@cryptsoft.com).
  64  * The implementation was written so as to conform with Netscapes SSL.
  65  *
  66  * This library is free for commercial and non-commercial use as long as
  67  * the following conditions are aheared to.  The following conditions
  68  * apply to all code found in this distribution, be it the RC4, RSA,
  69  * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
  70  * included with this distribution is covered by the same copyright terms
  71  * except that the holder is Tim Hudson (tjh@cryptsoft.com).
  72  *
  73  * Copyright remains Eric Young's, and as such any Copyright notices in
  74  * the code are not to be removed.
  75  * If this package is used in a product, Eric Young should be given attribution
  76  * as the author of the parts of the library used.
  77  * This can be in the form of a textual message at program startup or
  78  * in documentation (online or textual) provided with the package.
  79  *
  80  * Redistribution and use in source and binary forms, with or without
  81  * modification, are permitted provided that the following conditions
  82  * are met:
  83  * 1. Redistributions of source code must retain the copyright
  84  *    notice, this list of conditions and the following disclaimer.
  85  * 2. Redistributions in binary form must reproduce the above copyright
  86  *    notice, this list of conditions and the following disclaimer in the
  87  *    documentation and/or other materials provided with the distribution.
  88  * 3. All advertising materials mentioning features or use of this software
  89  *    must display the following acknowledgement:
  90  *    "This product includes cryptographic software written by
  91  *     Eric Young (eay@cryptsoft.com)"
  92  *    The word 'cryptographic' can be left out if the rouines from the library
  93  *    being used are not cryptographic related :-).
  94  * 4. If you include any Windows specific code (or a derivative thereof) from
  95  *    the apps directory (application code) you must include an acknowledgement:
  96  *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
  97  *
  98  * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
  99  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 100  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 101  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 102  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 103  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 104  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 105  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 106  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 107  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 108  * SUCH DAMAGE.
 109  *
 110  * The licence and distribution terms for any publically available version or
 111  * derivative of this code cannot be changed.  i.e. this code cannot simply be
 112  * copied and put under another distribution licence
 113  * [including the GNU Public Licence.]
 114  */
 115
 116 #include <stdio.h>
 117 #include <errno.h>
 118 #define USE_SOCKETS
 119 #include "ssl_locl.h"
 120 #include <openssl/evp.h>
 121 #include <openssl/buffer.h>
 122 #include <openssl/pqueue.h>
 123 #include <openssl/rand.h>
 124
 125 /* mod 128 saturating subtract of two 64-bit values in big-endian order */
 126 static int satsub64be(const unsigned char *v1,const unsigned char *v2)
 127 {       int ret,sat,brw,i;
 128
 129         if (sizeof(long) == 8) do
 130         {       const union { long one; char little; } is_endian = {1};
 131                 long l;
 132
 133                 if (is_endian.little)                   break;
 134                 /* not reached on little-endians */
 135                 /* following test is redundant, because input is
 136                  * always aligned, but I take no chances... */
 137                 if (((size_t)v1|(size_t)v2)&0x7)        break;
 138
 139                 l  = *((long *)v1);
 140                 l -= *((long *)v2);
 141                 if (l>128)              return 128;
 142                 else if (l<-128)        return -128;
 143                 else                    return (int)l;
 144         } while (0);
 145
 146         ret = (int)v1[7]-(int)v2[7];
 147         sat = 0;
 148         brw = ret>>8;   /* brw is either 0 or -1 */
 149         if (ret & 0x80)
 150         {       for (i=6;i>=0;i--)
 151                 {       brw += (int)v1[i]-(int)v2[i];
 152                         sat |= ~brw;
 153                         brw >>= 8;
 154                 }
 155         }
 156         else
 157         {       for (i=6;i>=0;i--)
 158                 {       brw += (int)v1[i]-(int)v2[i];
 159                         sat |= brw;
 160                         brw >>= 8;
 161                 }
 162         }
 163         brw <<= 8;      /* brw is either 0 or -256 */
 164
 165         if (sat&0xff)   return brw | 0x80;
 166         else            return brw + (ret&0xFF);
 167 }
 168
 169 static int have_handshake_fragment(SSL *s, int type, unsigned char *buf,
 170         int len, int peek);
 171 static int dtls1_record_replay_check(SSL *s, DTLS1_BITMAP *bitmap);
 172 static void dtls1_record_bitmap_update(SSL *s, DTLS1_BITMAP *bitmap);
 173 static DTLS1_BITMAP *dtls1_get_bitmap(SSL *s, SSL3_RECORD *rr,
 174     unsigned int *is_next_epoch);
 175 #if 0
 176 static int dtls1_record_needs_buffering(SSL *s, SSL3_RECORD *rr,
 177         unsigned short *priority, unsigned long *offset);
 178 #endif
 179 static int dtls1_buffer_record(SSL *s, record_pqueue *q,
 180         unsigned char *priority);
 181 static int dtls1_process_record(SSL *s);
 182 static void dtls1_clear_timeouts(SSL *s);
 183
 184 /* copy buffered record into SSL structure */
 185 static int
 186 dtls1_copy_record(SSL *s, pitem *item)
 187     {
 188     DTLS1_RECORD_DATA *rdata;
 189
 190     rdata = (DTLS1_RECORD_DATA *)item->data;
 191
 192     if (s->s3->rbuf.buf != NULL)
 193         OPENSSL_free(s->s3->rbuf.buf);
 194
 195     s->packet = rdata->packet;
 196     s->packet_length = rdata->packet_length;
 197     memcpy(&(s->s3->rbuf), &(rdata->rbuf), sizeof(SSL3_BUFFER));
 198     memcpy(&(s->s3->rrec), &(rdata->rrec), sizeof(SSL3_RECORD));
 199
 200         /* Set proper sequence number for mac calculation */
 201         memcpy(&(s->s3->read_sequence[2]), &(rdata->packet[5]), 6);
 202
 203     return(1);
 204     }
 205
 206
 207 static int
 208 dtls1_buffer_record(SSL *s, record_pqueue *queue, unsigned char *priority)
 209         {
 210         DTLS1_RECORD_DATA *rdata;
 211         pitem *item;
 212
 213         /* Limit the size of the queue to prevent DOS attacks */
 214         if (pqueue_size(queue->q) >= 100)
 215                 return 0;
 216
 217         rdata = OPENSSL_malloc(sizeof(DTLS1_RECORD_DATA));
 218         item = pitem_new(priority, rdata);
 219         if (rdata == NULL || item == NULL)
 220                 {
 221                 if (rdata != NULL) OPENSSL_free(rdata);
 222                 if (item != NULL) pitem_free(item);
 223
 224                 SSLerr(SSL_F_DTLS1_BUFFER_RECORD, ERR_R_INTERNAL_ERROR);
 225                 return(0);
 226                 }
 227
 228         rdata->packet = s->packet;
 229         rdata->packet_length = s->packet_length;
 230         memcpy(&(rdata->rbuf), &(s->s3->rbuf), sizeof(SSL3_BUFFER));
 231         memcpy(&(rdata->rrec), &(s->s3->rrec), sizeof(SSL3_RECORD));
 232
 233         item->data = rdata;
 234
 235         /* insert should not fail, since duplicates are dropped */
 236         if (pqueue_insert(queue->q, item) == NULL)
 237                 {
 238                 OPENSSL_free(rdata);
 239                 pitem_free(item);
 240                 return(0);
 241                 }
 242
 243         s->packet = NULL;
 244         s->packet_length = 0;
 245         memset(&(s->s3->rbuf), 0, sizeof(SSL3_BUFFER));
 246         memset(&(s->s3->rrec), 0, sizeof(SSL3_RECORD));
 247
 248         if (!ssl3_setup_buffers(s))
 249                 {
 250                 SSLerr(SSL_F_DTLS1_BUFFER_RECORD, ERR_R_INTERNAL_ERROR);
 251                 OPENSSL_free(rdata);
 252                 pitem_free(item);
 253                 return(0);
 254                 }
 255
 256         return(1);
 257         }
 258
 259
 260 static int
 261 dtls1_retrieve_buffered_record(SSL *s, record_pqueue *queue)
 262     {
 263     pitem *item;
 264
 265     item = pqueue_pop(queue->q);
 266     if (item)
 267         {
 268         dtls1_copy_record(s, item);
 269
 270         OPENSSL_free(item->data);
 271                 pitem_free(item);
 272
 273         return(1);
 274         }
 275
 276     return(0);
 277     }
 278
 279
 280 /* retrieve a buffered record that belongs to the new epoch, i.e., not processed
 281  * yet */
 282 #define dtls1_get_unprocessed_record(s) \
 283                    dtls1_retrieve_buffered_record((s), \
 284                    &((s)->d1->unprocessed_rcds))
 285
 286 /* retrieve a buffered record that belongs to the current epoch, ie, processed */
 287 #define dtls1_get_processed_record(s) \
 288                    dtls1_retrieve_buffered_record((s), \
 289                    &((s)->d1->processed_rcds))
 290
 291 static int
 292 dtls1_process_buffered_records(SSL *s)
 293     {
 294     pitem *item;
 295
 296     item = pqueue_peek(s->d1->unprocessed_rcds.q);
 297     if (item)
 298         {
 299         /* Check if epoch is current. */
 300         if (s->d1->unprocessed_rcds.epoch != s->d1->r_epoch)
 301             return(1);  /* Nothing to do. */
 302
 303         /* Process all the records. */
 304         while (pqueue_peek(s->d1->unprocessed_rcds.q))
 305             {
 306             dtls1_get_unprocessed_record(s);
 307             if ( ! dtls1_process_record(s))
 308                 return(0);
 309             dtls1_buffer_record(s, &(s->d1->processed_rcds),
 310                 s->s3->rrec.seq_num);
 311             }
 312         }
 313
 314     /* sync epoch numbers once all the unprocessed records
 315      * have been processed */
 316     s->d1->processed_rcds.epoch = s->d1->r_epoch;
 317     s->d1->unprocessed_rcds.epoch = s->d1->r_epoch + 1;
 318
 319     return(1);
 320     }
 321
 322
 323 #if 0
 324
 325 static int
 326 dtls1_get_buffered_record(SSL *s)
 327         {
 328         pitem *item;
 329         PQ_64BIT priority =
 330                 (((PQ_64BIT)s->d1->handshake_read_seq) << 32) |
 331                 ((PQ_64BIT)s->d1->r_msg_hdr.frag_off);
 332
 333         if ( ! SSL_in_init(s))  /* if we're not (re)negotiating,
 334                                                            nothing buffered */
 335                 return 0;
 336
 337
 338         item = pqueue_peek(s->d1->rcvd_records);
 339         if (item && item->priority == priority)
 340                 {
 341                 /* Check if we've received the record of interest.  It must be
 342                  * a handshake record, since data records as passed up without
 343                  * buffering */
 344                 DTLS1_RECORD_DATA *rdata;
 345                 item = pqueue_pop(s->d1->rcvd_records);
 346                 rdata = (DTLS1_RECORD_DATA *)item->data;
 347
 348                 if (s->s3->rbuf.buf != NULL)
 349                         OPENSSL_free(s->s3->rbuf.buf);
 350
 351                 s->packet = rdata->packet;
 352                 s->packet_length = rdata->packet_length;
 353                 memcpy(&(s->s3->rbuf), &(rdata->rbuf), sizeof(SSL3_BUFFER));
 354                 memcpy(&(s->s3->rrec), &(rdata->rrec), sizeof(SSL3_RECORD));
 355
 356                 OPENSSL_free(item->data);
 357                 pitem_free(item);
 358
 359                 /* s->d1->next_expected_seq_num++; */
 360                 return(1);
 361                 }
 362
 363         return 0;
 364         }
 365
 366 #endif
 367
 368 static int
 369 dtls1_process_record(SSL *s)
 370 {
 371         int i,al;
 372         int clear=0;
 373         int enc_err;
 374         SSL_SESSION *sess;
 375         SSL3_RECORD *rr;
 376         unsigned int mac_size;
 377         unsigned char md[EVP_MAX_MD_SIZE];
 378
 379
 380         rr= &(s->s3->rrec);
 381         sess = s->session;
 382
 383         /* At this point, s->packet_length == SSL3_RT_HEADER_LNGTH + rr->length,
 384          * and we have that many bytes in s->packet
 385          */
 386         rr->input= &(s->packet[DTLS1_RT_HEADER_LENGTH]);
 387
 388         /* ok, we can now read from 's->packet' data into 'rr'
 389          * rr->input points at rr->length bytes, which
 390          * need to be copied into rr->data by either
 391          * the decryption or by the decompression
 392          * When the data is 'copied' into the rr->data buffer,
 393          * rr->input will be pointed at the new buffer */
 394
 395         /* We now have - encrypted [ MAC [ compressed [ plain ] ] ]
 396          * rr->length bytes of encrypted compressed stuff. */
 397
 398         /* check is not needed I believe */
 399         if (rr->length > SSL3_RT_MAX_ENCRYPTED_LENGTH)
 400                 {
 401                 al=SSL_AD_RECORD_OVERFLOW;
 402                 SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_ENCRYPTED_LENGTH_TOO_LONG);
 403                 goto f_err;
 404                 }
 405
 406         /* decrypt in place in 'rr->input' */
 407         rr->data=rr->input;
 408
 409         enc_err = s->method->ssl3_enc->enc(s,0);
 410         if (enc_err <= 0)
 411                 {
 412                 /* decryption failed, silently discard message */
 413                 if (enc_err < 0)
 414                         {
 415                         rr->length = 0;
 416                         s->packet_length = 0;
 417                         }
 418                 goto err;
 419                 }
 420
 421 #ifdef TLS_DEBUG
 422 printf("dec %d\n",rr->length);
 423 { unsigned int z; for (z=0; z<rr->length; z++) printf("%02X%c",rr->data[z],((z+1)%16)?' ':'\n'); }
 424 printf("\n");
 425 #endif
 426
 427         /* r->length is now the compressed data plus mac */
 428         if (    (sess == NULL) ||
 429                 (s->enc_read_ctx == NULL) ||
 430                 (s->read_hash == NULL))
 431                 clear=1;
 432
 433         if (!clear)
 434                 {
 435                 /* !clear => s->read_hash != NULL => mac_size != -1 */
 436                 int t;
 437                 t=EVP_MD_CTX_size(s->read_hash);
 438                 OPENSSL_assert(t >= 0);
 439                 mac_size=t;
 440
 441                 if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH+mac_size)
 442                         {
 443 #if 0 /* OK only for stream ciphers (then rr->length is visible from ciphertext anyway) */
 444                         al=SSL_AD_RECORD_OVERFLOW;
 445                         SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_PRE_MAC_LENGTH_TOO_LONG);
 446                         goto f_err;
 447 #else
 448                         goto err;
 449 #endif
 450                         }
 451                 /* check the MAC for rr->input (it's in mac_size bytes at the tail) */
 452                 if (rr->length < mac_size)
 453                         {
 454 #if 0 /* OK only for stream ciphers */
 455                         al=SSL_AD_DECODE_ERROR;
 456                         SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_LENGTH_TOO_SHORT);
 457                         goto f_err;
 458 #else
 459                         goto err;
 460 #endif
 461                         }
 462                 rr->length-=mac_size;
 463                 i=s->method->ssl3_enc->mac(s,md,0);
 464                 if (i < 0 || memcmp(md,&(rr->data[rr->length]),mac_size) != 0)
 465                         {
 466                         goto err;
 467                         }
 468                 }
 469
 470         /* r->length is now just compressed */
 471         if (s->expand != NULL)
 472                 {
 473                 if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH)
 474                         {
 475                         al=SSL_AD_RECORD_OVERFLOW;
 476                         SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_COMPRESSED_LENGTH_TOO_LONG);
 477                         goto f_err;
 478                         }
 479                 if (!ssl3_do_uncompress(s))
 480                         {
 481                         al=SSL_AD_DECOMPRESSION_FAILURE;
 482                         SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_BAD_DECOMPRESSION);
 483                         goto f_err;
 484                         }
 485                 }
 486
 487         if (rr->length > SSL3_RT_MAX_PLAIN_LENGTH)
 488                 {
 489                 al=SSL_AD_RECORD_OVERFLOW;
 490                 SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_DATA_LENGTH_TOO_LONG);
 491                 goto f_err;
 492                 }
 493
 494         rr->off=0;
 495         /* So at this point the following is true
 496          * ssl->s3->rrec.type   is the type of record
 497          * ssl->s3->rrec.length == number of bytes in record
 498          * ssl->s3->rrec.off    == offset to first valid byte
 499          * ssl->s3->rrec.data   == where to take bytes from, increment
 500          *                         after use :-).
 501          */
 502
 503         /* we have pulled in a full packet so zero things */
 504         s->packet_length=0;
 505         dtls1_record_bitmap_update(s, &(s->d1->bitmap));/* Mark receipt of record. */
 506         return(1);
 507
 508 f_err:
 509         ssl3_send_alert(s,SSL3_AL_FATAL,al);
 510 err:
 511         return(0);
 512 }
 513
 514
 515 /* Call this to get a new input record.
 516  * It will return <= 0 if more data is needed, normally due to an error
 517  * or non-blocking IO.
 518  * When it finishes, one packet has been decoded and can be found in
 519  * ssl->s3->rrec.type    - is the type of record
 520  * ssl->s3->rrec.data,   - data
 521  * ssl->s3->rrec.length, - number of bytes
 522  */
 523 /* used only by dtls1_read_bytes */
 524 int dtls1_get_record(SSL *s)
 525         {
 526         int ssl_major,ssl_minor;
 527         int i,n;
 528         SSL3_RECORD *rr;
 529         unsigned char *p = NULL;
 530         unsigned short version;
 531         DTLS1_BITMAP *bitmap;
 532         unsigned int is_next_epoch;
 533
 534         rr= &(s->s3->rrec);
 535
 536         /* The epoch may have changed.  If so, process all the
 537          * pending records.  This is a non-blocking operation. */
 538         dtls1_process_buffered_records(s);
 539
 540         /* if we're renegotiating, then there may be buffered records */
 541         if (dtls1_get_processed_record(s))
 542                 return 1;
 543
 544         /* get something from the wire */
 545 again:
 546         /* check if we have the header */
 547         if (    (s->rstate != SSL_ST_READ_BODY) ||
 548                 (s->packet_length < DTLS1_RT_HEADER_LENGTH))
 549                 {
 550                 n=ssl3_read_n(s, DTLS1_RT_HEADER_LENGTH, s->s3->rbuf.len, 0);
 551                 /* read timeout is handled by dtls1_read_bytes */
 552                 if (n <= 0) return(n); /* error or non-blocking */
 553
 554                 /* this packet contained a partial record, dump it */
 555                 if (s->packet_length != DTLS1_RT_HEADER_LENGTH)
 556                         {
 557                         s->packet_length = 0;
 558                         goto again;
 559                         }
 560
 561                 s->rstate=SSL_ST_READ_BODY;
 562
 563                 p=s->packet;
 564
 565                 /* Pull apart the header into the DTLS1_RECORD */
 566                 rr->type= *(p++);
 567                 ssl_major= *(p++);
 568                 ssl_minor= *(p++);
 569                 version=(ssl_major<<8)|ssl_minor;
 570
 571                 /* sequence number is 64 bits, with top 2 bytes = epoch */
 572                 n2s(p,rr->epoch);
 573
 574                 memcpy(&(s->s3->read_sequence[2]), p, 6);
 575                 p+=6;
 576
 577                 n2s(p,rr->length);
 578
 579                 /* Lets check version */
 580                 if (!s->first_packet)
 581                         {
 582                         if (version != s->version)
 583                                 {
 584                                 /* unexpected version, silently discard */
 585                                 rr->length = 0;
 586                                 s->packet_length = 0;
 587                                 goto again;
 588                                 }
 589                         }
 590
 591                 if ((version & 0xff00) != (s->version & 0xff00))
 592                         {
 593                         /* wrong version, silently discard record */
 594                         rr->length = 0;
 595                         s->packet_length = 0;
 596                         goto again;
 597                         }
 598
 599                 if (rr->length > SSL3_RT_MAX_ENCRYPTED_LENGTH)
 600                         {
 601                         /* record too long, silently discard it */
 602                         rr->length = 0;
 603                         s->packet_length = 0;
 604                         goto again;
 605                         }
 606
 607                 /* now s->rstate == SSL_ST_READ_BODY */
 608                 }
 609
 610         /* s->rstate == SSL_ST_READ_BODY, get and decode the data */
 611
 612         if (rr->length > s->packet_length-DTLS1_RT_HEADER_LENGTH)
 613                 {
 614                 /* now s->packet_length == DTLS1_RT_HEADER_LENGTH */
 615                 i=rr->length;
 616                 n=ssl3_read_n(s,i,i,1);
 617                 if (n <= 0) return(n); /* error or non-blocking io */
 618
 619                 /* this packet contained a partial record, dump it */
 620                 if ( n != i)
 621                         {
 622                         rr->length = 0;
 623                         s->packet_length = 0;
 624                         goto again;
 625                         }
 626
 627                 /* now n == rr->length,
 628                  * and s->packet_length == DTLS1_RT_HEADER_LENGTH + rr->length */
 629                 }
 630         s->rstate=SSL_ST_READ_HEADER; /* set state for later operations */
 631
 632         /* match epochs.  NULL means the packet is dropped on the floor */
 633         bitmap = dtls1_get_bitmap(s, rr, &is_next_epoch);
 634         if ( bitmap == NULL)
 635                 {
 636                 rr->length = 0;
 637                 s->packet_length = 0;  /* dump this record */
 638                 goto again;   /* get another record */
 639                 }
 640
 641         /* Check whether this is a repeat, or aged record.
 642          * Don't check if we're listening and this message is
 643          * a ClientHello. They can look as if they're replayed,
 644          * since they arrive from different connections and
 645          * would be dropped unnecessarily.
 646          */
 647         if (!(s->d1->listen && rr->type == SSL3_RT_HANDSHAKE &&
 648                 *p == SSL3_MT_CLIENT_HELLO) &&
 649                 !dtls1_record_replay_check(s, bitmap))
 650                 {
 651                 rr->length = 0;
 652                 s->packet_length=0; /* dump this record */
 653                 goto again;     /* get another record */
 654                 }
 655
 656         /* just read a 0 length packet */
 657         if (rr->length == 0) goto again;
 658
 659         /* If this record is from the next epoch (either HM or ALERT),
 660          * and a handshake is currently in progress, buffer it since it
 661          * cannot be processed at this time. However, do not buffer
 662          * anything while listening.
 663          */
 664         if (is_next_epoch)
 665                 {
 666                 if ((SSL_in_init(s) || s->in_handshake) && !s->d1->listen)
 667                         {
 668                         dtls1_buffer_record(s, &(s->d1->unprocessed_rcds), rr->seq_num);
 669                         }
 670                 rr->length = 0;
 671                 s->packet_length = 0;
 672                 goto again;
 673                 }
 674
 675         if (!dtls1_process_record(s))
 676                 {
 677                 rr->length = 0;
 678                 s->packet_length = 0;  /* dump this record */
 679                 goto again;   /* get another record */
 680                 }
 681
 682         dtls1_clear_timeouts(s);  /* done waiting */
 683         return(1);
 684
 685         }
 686
 687 /* Return up to 'len' payload bytes received in 'type' records.
 688  * 'type' is one of the following:
 689  *
 690  *   -  SSL3_RT_HANDSHAKE (when ssl3_get_message calls us)
 691  *   -  SSL3_RT_APPLICATION_DATA (when ssl3_read calls us)
 692  *   -  0 (during a shutdown, no data has to be returned)
 693  *
 694  * If we don't have stored data to work from, read a SSL/TLS record first
 695  * (possibly multiple records if we still don't have anything to return).
 696  *
 697  * This function must handle any surprises the peer may have for us, such as
 698  * Alert records (e.g. close_notify), ChangeCipherSpec records (not really
 699  * a surprise, but handled as if it were), or renegotiation requests.
 700  * Also if record payloads contain fragments too small to process, we store
 701  * them until there is enough for the respective protocol (the record protocol
 702  * may use arbitrary fragmentation and even interleaving):
 703  *     Change cipher spec protocol
 704  *             just 1 byte needed, no need for keeping anything stored
 705  *     Alert protocol
 706  *             2 bytes needed (AlertLevel, AlertDescription)
 707  *     Handshake protocol
 708  *             4 bytes needed (HandshakeType, uint24 length) -- we just have
 709  *             to detect unexpected Client Hello and Hello Request messages
 710  *             here, anything else is handled by higher layers
 711  *     Application data protocol
 712  *             none of our business
 713  */
 714 int dtls1_read_bytes(SSL *s, int type, unsigned char *buf, int len, int peek)
 715         {
 716         int al,i,j,ret;
 717         unsigned int n;
 718         SSL3_RECORD *rr;
 719         void (*cb)(const SSL *ssl,int type2,int val)=NULL;
 720
 721         if (s->s3->rbuf.buf == NULL) /* Not initialized yet */
 722                 if (!ssl3_setup_buffers(s))
 723                         return(-1);
 724
 725     /* XXX: check what the second '&& type' is about */
 726         if ((type && (type != SSL3_RT_APPLICATION_DATA) &&
 727                 (type != SSL3_RT_HANDSHAKE) && type) ||
 728             (peek && (type != SSL3_RT_APPLICATION_DATA)))
 729                 {
 730                 SSLerr(SSL_F_DTLS1_READ_BYTES, ERR_R_INTERNAL_ERROR);
 731                 return -1;
 732                 }
 733
 734         /* check whether there's a handshake message (client hello?) waiting */
 735         if ( (ret = have_handshake_fragment(s, type, buf, len, peek)))
 736                 return ret;
 737
 738         /* Now s->d1->handshake_fragment_len == 0 if type == SSL3_RT_HANDSHAKE. */
 739
 740         if (!s->in_handshake && SSL_in_init(s))
 741                 {
 742                 /* type == SSL3_RT_APPLICATION_DATA */
 743                 i=s->handshake_func(s);
 744                 if (i < 0) return(i);
 745                 if (i == 0)
 746                         {
 747                         SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
 748                         return(-1);
 749                         }
 750                 }
 751
 752 start:
 753         s->rwstate=SSL_NOTHING;
 754
 755         /* s->s3->rrec.type         - is the type of record
 756          * s->s3->rrec.data,    - data
 757          * s->s3->rrec.off,     - offset into 'data' for next read
 758          * s->s3->rrec.length,  - number of bytes. */
 759         rr = &(s->s3->rrec);
 760
 761         /* We are not handshaking and have no data yet,
 762          * so process data buffered during the last handshake
 763          * in advance, if any.
 764          */
 765         if (s->state == SSL_ST_OK && rr->length == 0)
 766                 {
 767                 pitem *item;
 768                 item = pqueue_pop(s->d1->buffered_app_data.q);
 769                 if (item)
 770                         {
 771                         dtls1_copy_record(s, item);
 772
 773                         OPENSSL_free(item->data);
 774                         pitem_free(item);
 775                         }
 776                 }
 777
 778         /* Check for timeout */
 779         if (dtls1_handle_timeout(s) > 0)
 780                 goto start;
 781
 782         /* get new packet if necessary */
 783         if ((rr->length == 0) || (s->rstate == SSL_ST_READ_BODY))
 784                 {
 785                 ret=dtls1_get_record(s);
 786                 if (ret <= 0)
 787                         {
 788                         ret = dtls1_read_failed(s, ret);
 789                         /* anything other than a timeout is an error */
 790                         if (ret <= 0)
 791                                 return(ret);
 792                         else
 793                                 goto start;
 794                         }
 795                 }
 796
 797         /* we now have a packet which can be read and processed */
 798
 799         if (s->s3->change_cipher_spec /* set when we receive ChangeCipherSpec,
 800                                        * reset by ssl3_get_finished */
 801                 && (rr->type != SSL3_RT_HANDSHAKE))
 802                 {
 803                 /* We now have application data between CCS and Finished.
 804                  * Most likely the packets were reordered on their way, so
 805                  * buffer the application data for later processing rather
 806                  * than dropping the connection.
 807                  */
 808                 dtls1_buffer_record(s, &(s->d1->buffered_app_data), rr->seq_num);
 809                 rr->length = 0;
 810                 goto start;
 811                 }
 812
 813         /* If the other end has shut down, throw anything we read away
 814          * (even in 'peek' mode) */
 815         if (s->shutdown & SSL_RECEIVED_SHUTDOWN)
 816                 {
 817                 rr->length=0;
 818                 s->rwstate=SSL_NOTHING;
 819                 return(0);
 820                 }
 821
 822
 823         if (type == rr->type) /* SSL3_RT_APPLICATION_DATA or SSL3_RT_HANDSHAKE */
 824                 {
 825                 /* make sure that we are not getting application data when we
 826                  * are doing a handshake for the first time */
 827                 if (SSL_in_init(s) && (type == SSL3_RT_APPLICATION_DATA) &&
 828                         (s->enc_read_ctx == NULL))
 829                         {
 830                         al=SSL_AD_UNEXPECTED_MESSAGE;
 831                         SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_APP_DATA_IN_HANDSHAKE);
 832                         goto f_err;
 833                         }
 834
 835                 if (len <= 0) return(len);
 836
 837                 if ((unsigned int)len > rr->length)
 838                         n = rr->length;
 839                 else
 840                         n = (unsigned int)len;
 841
 842                 memcpy(buf,&(rr->data[rr->off]),n);
 843                 if (!peek)
 844                         {
 845                         rr->length-=n;
 846                         rr->off+=n;
 847                         if (rr->length == 0)
 848                                 {
 849                                 s->rstate=SSL_ST_READ_HEADER;
 850                                 rr->off=0;
 851                                 }
 852                         }
 853                 return(n);
 854                 }
 855
 856
 857         /* If we get here, then type != rr->type; if we have a handshake
 858          * message, then it was unexpected (Hello Request or Client Hello). */
 859
 860         /* In case of record types for which we have 'fragment' storage,
 861          * fill that so that we can process the data at a fixed place.
 862          */
 863                 {
 864                 unsigned int k, dest_maxlen = 0;
 865                 unsigned char *dest = NULL;
 866                 unsigned int *dest_len = NULL;
 867
 868                 if (rr->type == SSL3_RT_HANDSHAKE)
 869                         {
 870                         dest_maxlen = sizeof s->d1->handshake_fragment;
 871                         dest = s->d1->handshake_fragment;
 872                         dest_len = &s->d1->handshake_fragment_len;
 873                         }
 874                 else if (rr->type == SSL3_RT_ALERT)
 875                         {
 876                         dest_maxlen = sizeof(s->d1->alert_fragment);
 877                         dest = s->d1->alert_fragment;
 878                         dest_len = &s->d1->alert_fragment_len;
 879                         }
 880                 /* else it's a CCS message, or application data or wrong */
 881                 else if (rr->type != SSL3_RT_CHANGE_CIPHER_SPEC)
 882                         {
 883                         /* Application data while renegotiating
 884                          * is allowed. Try again reading.
 885                          */
 886                         if (rr->type == SSL3_RT_APPLICATION_DATA)
 887                                 {
 888                                 BIO *bio;
 889                                 s->s3->in_read_app_data=2;
 890                                 bio=SSL_get_rbio(s);
 891                                 s->rwstate=SSL_READING;
 892                                 BIO_clear_retry_flags(bio);
 893                                 BIO_set_retry_read(bio);
 894                                 return(-1);
 895                                 }
 896
 897                         /* Not certain if this is the right error handling */
 898                         al=SSL_AD_UNEXPECTED_MESSAGE;
 899                         SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_UNEXPECTED_RECORD);
 900                         goto f_err;
 901                         }
 902
 903                 if (dest_maxlen > 0)
 904                         {
 905             /* XDTLS:  In a pathalogical case, the Client Hello
 906              *  may be fragmented--don't always expect dest_maxlen bytes */
 907                         if ( rr->length < dest_maxlen)
 908                                 {
 909 #ifdef DTLS1_AD_MISSING_HANDSHAKE_MESSAGE
 910                                 /*
 911                                  * for normal alerts rr->length is 2, while
 912                                  * dest_maxlen is 7 if we were to handle this
 913                                  * non-existing alert...
 914                                  */
 915                                 FIX ME
 916 #endif
 917                                 s->rstate=SSL_ST_READ_HEADER;
 918                                 rr->length = 0;
 919                                 goto start;
 920                                 }
 921
 922                         /* now move 'n' bytes: */
 923                         for ( k = 0; k < dest_maxlen; k++)
 924                                 {
 925                                 dest[k] = rr->data[rr->off++];
 926                                 rr->length--;
 927                                 }
 928                         *dest_len = dest_maxlen;
 929                         }
 930                 }
 931
 932         /* s->d1->handshake_fragment_len == 12  iff  rr->type == SSL3_RT_HANDSHAKE;
 933          * s->d1->alert_fragment_len == 7      iff  rr->type == SSL3_RT_ALERT.
 934          * (Possibly rr is 'empty' now, i.e. rr->length may be 0.) */
 935
 936         /* If we are a client, check for an incoming 'Hello Request': */
 937         if ((!s->server) &&
 938                 (s->d1->handshake_fragment_len >= DTLS1_HM_HEADER_LENGTH) &&
 939                 (s->d1->handshake_fragment[0] == SSL3_MT_HELLO_REQUEST) &&
 940                 (s->session != NULL) && (s->session->cipher != NULL))
 941                 {
 942                 s->d1->handshake_fragment_len = 0;
 943
 944                 if ((s->d1->handshake_fragment[1] != 0) ||
 945                         (s->d1->handshake_fragment[2] != 0) ||
 946                         (s->d1->handshake_fragment[3] != 0))
 947                         {
 948                         al=SSL_AD_DECODE_ERROR;
 949                         SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_BAD_HELLO_REQUEST);
 950                         goto err;
 951                         }
 952
 953                 /* no need to check sequence number on HELLO REQUEST messages */
 954
 955                 if (s->msg_callback)
 956                         s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE,
 957                                 s->d1->handshake_fragment, 4, s, s->msg_callback_arg);
 958
 959                 if (SSL_is_init_finished(s) &&
 960                         !(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS) &&
 961                         !s->s3->renegotiate)
 962                         {
 963                         ssl3_renegotiate(s);
 964                         if (ssl3_renegotiate_check(s))
 965                                 {
 966                                 i=s->handshake_func(s);
 967                                 if (i < 0) return(i);
 968                                 if (i == 0)
 969                                         {
 970                                         SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
 971                                         return(-1);
 972                                         }
 973
 974                                 if (!(s->mode & SSL_MODE_AUTO_RETRY))
 975                                         {
 976                                         if (s->s3->rbuf.left == 0) /* no read-ahead left? */
 977                                                 {
 978                                                 BIO *bio;
 979                                                 /* In the case where we try to read application data,
 980                                                  * but we trigger an SSL handshake, we return -1 with
 981                                                  * the retry option set.  Otherwise renegotiation may
 982                                                  * cause nasty problems in the blocking world */
 983                                                 s->rwstate=SSL_READING;
 984                                                 bio=SSL_get_rbio(s);
 985                                                 BIO_clear_retry_flags(bio);
 986                                                 BIO_set_retry_read(bio);
 987                                                 return(-1);
 988                                                 }
 989                                         }
 990                                 }
 991                         }
 992                 /* we either finished a handshake or ignored the request,
 993                  * now try again to obtain the (application) data we were asked for */
 994                 goto start;
 995                 }
 996
 997         if (s->d1->alert_fragment_len >= DTLS1_AL_HEADER_LENGTH)
 998                 {
 999                 int alert_level = s->d1->alert_fragment[0];
1000                 int alert_descr = s->d1->alert_fragment[1];
1001
1002                 s->d1->alert_fragment_len = 0;
1003
1004                 if (s->msg_callback)
1005                         s->msg_callback(0, s->version, SSL3_RT_ALERT,
1006                                 s->d1->alert_fragment, 2, s, s->msg_callback_arg);
1007
1008                 if (s->info_callback != NULL)
1009                         cb=s->info_callback;
1010                 else if (s->ctx->info_callback != NULL)
1011                         cb=s->ctx->info_callback;
1012
1013                 if (cb != NULL)
1014                         {
1015                         j = (alert_level << 8) | alert_descr;
1016                         cb(s, SSL_CB_READ_ALERT, j);
1017                         }
1018
1019                 if (alert_level == 1) /* warning */
1020                         {
1021                         s->s3->warn_alert = alert_descr;
1022                         if (alert_descr == SSL_AD_CLOSE_NOTIFY)
1023                                 {
1024                                 s->shutdown |= SSL_RECEIVED_SHUTDOWN;
1025                                 return(0);
1026                                 }
1027 #if 0
1028             /* XXX: this is a possible improvement in the future */
1029                         /* now check if it's a missing record */
1030                         if (alert_descr == DTLS1_AD_MISSING_HANDSHAKE_MESSAGE)
1031                                 {
1032                                 unsigned short seq;
1033                                 unsigned int frag_off;
1034                                 unsigned char *p = &(s->d1->alert_fragment[2]);
1035
1036                                 n2s(p, seq);
1037                                 n2l3(p, frag_off);
1038
1039                                 dtls1_retransmit_message(s,
1040                                                                                  dtls1_get_queue_priority(frag->msg_header.seq, 0),
1041                                                                                  frag_off, &found);
1042                                 if ( ! found  && SSL_in_init(s))
1043                                         {
1044                                         /* fprintf( stderr,"in init = %d\n", SSL_in_init(s)); */
1045                                         /* requested a message not yet sent,
1046                                            send an alert ourselves */
1047                                         ssl3_send_alert(s,SSL3_AL_WARNING,
1048                                                 DTLS1_AD_MISSING_HANDSHAKE_MESSAGE);
1049                                         }
1050                                 }
1051 #endif
1052                         }
1053                 else if (alert_level == 2) /* fatal */
1054                         {
1055                         char tmp[16];
1056
1057                         s->rwstate=SSL_NOTHING;
1058                         s->s3->fatal_alert = alert_descr;
1059                         SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_AD_REASON_OFFSET + alert_descr);
1060                         BIO_snprintf(tmp,sizeof tmp,"%d",alert_descr);
1061                         ERR_add_error_data(2,"SSL alert number ",tmp);
1062                         s->shutdown|=SSL_RECEIVED_SHUTDOWN;
1063                         SSL_CTX_remove_session(s->ctx,s->session);
1064                         return(0);
1065                         }
1066                 else
1067                         {
1068                         al=SSL_AD_ILLEGAL_PARAMETER;
1069                         SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_UNKNOWN_ALERT_TYPE);
1070                         goto f_err;
1071                         }
1072
1073                 goto start;
1074                 }
1075
1076         if (s->shutdown & SSL_SENT_SHUTDOWN) /* but we have not received a shutdown */
1077                 {
1078                 s->rwstate=SSL_NOTHING;
1079                 rr->length=0;
1080                 return(0);
1081                 }
1082
1083         if (rr->type == SSL3_RT_CHANGE_CIPHER_SPEC)
1084                 {
1085                 struct ccs_header_st ccs_hdr;
1086                 unsigned int ccs_hdr_len = DTLS1_CCS_HEADER_LENGTH;
1087
1088                 dtls1_get_ccs_header(rr->data, &ccs_hdr);
1089
1090                 if (s->version == DTLS1_BAD_VER)
1091                         ccs_hdr_len = 3;
1092
1093                 /* 'Change Cipher Spec' is just a single byte, so we know
1094                  * exactly what the record payload has to look like */
1095                 /* XDTLS: check that epoch is consistent */
1096                 if (    (rr->length != ccs_hdr_len) ||
1097                         (rr->off != 0) || (rr->data[0] != SSL3_MT_CCS))
1098                         {
1099                         i=SSL_AD_ILLEGAL_PARAMETER;
1100                         SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_BAD_CHANGE_CIPHER_SPEC);
1101                         goto err;
1102                         }
1103
1104                 rr->length=0;
1105
1106                 if (s->msg_callback)
1107                         s->msg_callback(0, s->version, SSL3_RT_CHANGE_CIPHER_SPEC,
1108                                 rr->data, 1, s, s->msg_callback_arg);
1109
1110                 /* We can't process a CCS now, because previous handshake
1111                  * messages are still missing, so just drop it.
1112                  */
1113                 if (!s->d1->change_cipher_spec_ok)
1114                         {
1115                         goto start;
1116                         }
1117
1118                 s->d1->change_cipher_spec_ok = 0;
1119
1120                 s->s3->change_cipher_spec=1;
1121                 if (!ssl3_do_change_cipher_spec(s))
1122                         goto err;
1123
1124                 /* do this whenever CCS is processed */
1125                 dtls1_reset_seq_numbers(s, SSL3_CC_READ);
1126
1127                 if (s->version == DTLS1_BAD_VER)
1128                         s->d1->handshake_read_seq++;
1129
1130                 goto start;
1131                 }
1132
1133         /* Unexpected handshake message (Client Hello, or protocol violation) */
1134         if ((s->d1->handshake_fragment_len >= DTLS1_HM_HEADER_LENGTH) &&
1135                 !s->in_handshake)
1136                 {
1137                 struct hm_header_st msg_hdr;
1138
1139                 /* this may just be a stale retransmit */
1140                 dtls1_get_message_header(rr->data, &msg_hdr);
1141                 if( rr->epoch != s->d1->r_epoch)
1142                         {
1143                         rr->length = 0;
1144                         goto start;
1145                         }
1146
1147                 /* If we are server, we may have a repeated FINISHED of the
1148                  * client here, then retransmit our CCS and FINISHED.
1149                  */
1150                 if (msg_hdr.type == SSL3_MT_FINISHED)
1151                         {
1152                         dtls1_retransmit_buffered_messages(s);
1153                         rr->length = 0;
1154                         goto start;
1155                         }
1156
1157                 if (((s->state&SSL_ST_MASK) == SSL_ST_OK) &&
1158                         !(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS))
1159                         {
1160 #if 0 /* worked only because C operator preferences are not as expected (and
1161        * because this is not really needed for clients except for detecting
1162        * protocol violations): */
1163                         s->state=SSL_ST_BEFORE|(s->server)
1164                                 ?SSL_ST_ACCEPT
1165                                 :SSL_ST_CONNECT;
1166 #else
1167                         s->state = s->server ? SSL_ST_ACCEPT : SSL_ST_CONNECT;
1168 #endif
1169                         s->new_session=1;
1170                         }
1171                 i=s->handshake_func(s);
1172                 if (i < 0) return(i);
1173                 if (i == 0)
1174                         {
1175                         SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
1176                         return(-1);
1177                         }
1178
1179                 if (!(s->mode & SSL_MODE_AUTO_RETRY))
1180                         {
1181                         if (s->s3->rbuf.left == 0) /* no read-ahead left? */
1182                                 {
1183                                 BIO *bio;
1184                                 /* In the case where we try to read application data,
1185                                  * but we trigger an SSL handshake, we return -1 with
1186                                  * the retry option set.  Otherwise renegotiation may
1187                                  * cause nasty problems in the blocking world */
1188                                 s->rwstate=SSL_READING;
1189                                 bio=SSL_get_rbio(s);
1190                                 BIO_clear_retry_flags(bio);
1191                                 BIO_set_retry_read(bio);
1192                                 return(-1);
1193                                 }
1194                         }
1195                 goto start;
1196                 }
1197
1198         switch (rr->type)
1199                 {
1200         default:
1201 #ifndef OPENSSL_NO_TLS
1202                 /* TLS just ignores unknown message types */
1203                 if (s->version == TLS1_VERSION)
1204                         {
1205                         rr->length = 0;
1206                         goto start;
1207                         }
1208 #endif
1209                 al=SSL_AD_UNEXPECTED_MESSAGE;
1210                 SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_UNEXPECTED_RECORD);
1211                 goto f_err;
1212         case SSL3_RT_CHANGE_CIPHER_SPEC:
1213         case SSL3_RT_ALERT:
1214         case SSL3_RT_HANDSHAKE:
1215                 /* we already handled all of these, with the possible exception
1216                  * of SSL3_RT_HANDSHAKE when s->in_handshake is set, but that
1217                  * should not happen when type != rr->type */
1218                 al=SSL_AD_UNEXPECTED_MESSAGE;
1219                 SSLerr(SSL_F_DTLS1_READ_BYTES,ERR_R_INTERNAL_ERROR);
1220                 goto f_err;
1221         case SSL3_RT_APPLICATION_DATA:
1222                 /* At this point, we were expecting handshake data,
1223                  * but have application data.  If the library was
1224                  * running inside ssl3_read() (i.e. in_read_app_data
1225                  * is set) and it makes sense to read application data
1226                  * at this point (session renegotiation not yet started),
1227                  * we will indulge it.
1228                  */
1229                 if (s->s3->in_read_app_data &&
1230                         (s->s3->total_renegotiations != 0) &&
1231                         ((
1232                                 (s->state & SSL_ST_CONNECT) &&
1233                                 (s->state >= SSL3_ST_CW_CLNT_HELLO_A) &&
1234                                 (s->state <= SSL3_ST_CR_SRVR_HELLO_A)
1235                                 ) || (
1236                                         (s->state & SSL_ST_ACCEPT) &&
1237                                         (s->state <= SSL3_ST_SW_HELLO_REQ_A) &&
1238                                         (s->state >= SSL3_ST_SR_CLNT_HELLO_A)
1239                                         )
1240                                 ))
1241                         {
1242                         s->s3->in_read_app_data=2;
1243                         return(-1);
1244                         }
1245                 else
1246                         {
1247                         al=SSL_AD_UNEXPECTED_MESSAGE;
1248                         SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_UNEXPECTED_RECORD);
1249                         goto f_err;
1250                         }
1251                 }
1252         /* not reached */
1253
1254 f_err:
1255         ssl3_send_alert(s,SSL3_AL_FATAL,al);
1256 err:
1257         return(-1);
1258         }
1259
1260 int
1261 dtls1_write_app_data_bytes(SSL *s, int type, const void *buf_, int len)
1262         {
1263         int i;
1264
1265         if (SSL_in_init(s) && !s->in_handshake)
1266                 {
1267                 i=s->handshake_func(s);
1268                 if (i < 0) return(i);
1269                 if (i == 0)
1270                         {
1271                         SSLerr(SSL_F_DTLS1_WRITE_APP_DATA_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
1272                         return -1;
1273                         }
1274                 }
1275
1276         if (len > SSL3_RT_MAX_PLAIN_LENGTH)
1277                 {
1278                         SSLerr(SSL_F_DTLS1_WRITE_APP_DATA_BYTES,SSL_R_DTLS_MESSAGE_TOO_BIG);
1279                         return -1;
1280                 }
1281
1282         i = dtls1_write_bytes(s, type, buf_, len);
1283         return i;
1284         }
1285
1286
1287         /* this only happens when a client hello is received and a handshake
1288          * is started. */
1289 static int
1290 have_handshake_fragment(SSL *s, int type, unsigned char *buf,
1291         int len, int peek)
1292         {
1293
1294         if ((type == SSL3_RT_HANDSHAKE) && (s->d1->handshake_fragment_len > 0))
1295                 /* (partially) satisfy request from storage */
1296                 {
1297                 unsigned char *src = s->d1->handshake_fragment;
1298                 unsigned char *dst = buf;
1299                 unsigned int k,n;
1300
1301                 /* peek == 0 */
1302                 n = 0;
1303                 while ((len > 0) && (s->d1->handshake_fragment_len > 0))
1304                         {
1305                         *dst++ = *src++;
1306                         len--; s->d1->handshake_fragment_len--;
1307                         n++;
1308                         }
1309                 /* move any remaining fragment bytes: */
1310                 for (k = 0; k < s->d1->handshake_fragment_len; k++)
1311                         s->d1->handshake_fragment[k] = *src++;
1312                 return n;
1313                 }
1314
1315         return 0;
1316         }
1317
1318
1319
1320
1321 /* Call this to write data in records of type 'type'
1322  * It will return <= 0 if not all data has been sent or non-blocking IO.
1323  */
1324 int dtls1_write_bytes(SSL *s, int type, const void *buf, int len)
1325         {
1326         int i;
1327
1328         OPENSSL_assert(len <= SSL3_RT_MAX_PLAIN_LENGTH);
1329         s->rwstate=SSL_NOTHING;
1330         i=do_dtls1_write(s, type, buf, len, 0);
1331         return i;
1332         }
1333
1334 int do_dtls1_write(SSL *s, int type, const unsigned char *buf, unsigned int len, int create_empty_fragment)
1335         {
1336         unsigned char *p,*pseq;
1337         int i,mac_size,clear=0;
1338         int prefix_len = 0;
1339         SSL3_RECORD *wr;
1340         SSL3_BUFFER *wb;
1341         SSL_SESSION *sess;
1342         int bs;
1343
1344         /* first check if there is a SSL3_BUFFER still being written
1345          * out.  This will happen with non blocking IO */
1346         if (s->s3->wbuf.left != 0)
1347                 {
1348                 OPENSSL_assert(0); /* XDTLS:  want to see if we ever get here */
1349                 return(ssl3_write_pending(s,type,buf,len));
1350                 }
1351
1352         /* If we have an alert to send, lets send it */
1353         if (s->s3->alert_dispatch)
1354                 {
1355                 i=s->method->ssl_dispatch_alert(s);
1356                 if (i <= 0)
1357                         return(i);
1358                 /* if it went, fall through and send more stuff */
1359                 }
1360
1361         if (len == 0 && !create_empty_fragment)
1362                 return 0;
1363
1364         wr= &(s->s3->wrec);
1365         wb= &(s->s3->wbuf);
1366         sess=s->session;
1367
1368         if (    (sess == NULL) ||
1369                 (s->enc_write_ctx == NULL) ||
1370                 (EVP_MD_CTX_md(s->write_hash) == NULL))
1371                 clear=1;
1372
1373         if (clear)
1374                 mac_size=0;
1375         else
1376                 {
1377                 mac_size=EVP_MD_CTX_size(s->write_hash);
1378                 if (mac_size < 0)
1379                         goto err;
1380                 }
1381
1382         /* DTLS implements explicit IV, so no need for empty fragments */
1383 #if 0
1384         /* 'create_empty_fragment' is true only when this function calls itself */
1385         if (!clear && !create_empty_fragment && !s->s3->empty_fragment_done
1386             && SSL_version(s) != DTLS1_VERSION && SSL_version(s) != DTLS1_BAD_VER)
1387                 {
1388                 /* countermeasure against known-IV weakness in CBC ciphersuites
1389                  * (see http://www.openssl.org/~bodo/tls-cbc.txt)
1390                  */
1391
1392                 if (s->s3->need_empty_fragments && type == SSL3_RT_APPLICATION_DATA)
1393                         {
1394                         /* recursive function call with 'create_empty_fragment' set;
1395                          * this prepares and buffers the data for an empty fragment
1396                          * (these 'prefix_len' bytes are sent out later
1397                          * together with the actual payload) */
1398                         prefix_len = s->method->do_ssl_write(s, type, buf, 0, 1);
1399                         if (prefix_len <= 0)
1400                                 goto err;
1401
1402                         if (s->s3->wbuf.len < (size_t)prefix_len + SSL3_RT_MAX_PACKET_SIZE)
1403                                 {
1404                                 /* insufficient space */
1405                                 SSLerr(SSL_F_DO_DTLS1_WRITE, ERR_R_INTERNAL_ERROR);
1406                                 goto err;
1407                                 }
1408                         }
1409
1410                 s->s3->empty_fragment_done = 1;
1411                 }
1412 #endif
1413         p = wb->buf + prefix_len;
1414
1415         /* write the header */
1416
1417         *(p++)=type&0xff;
1418         wr->type=type;
1419
1420         *(p++)=(s->version>>8);
1421         *(p++)=s->version&0xff;
1422
1423         /* field where we are to write out packet epoch, seq num and len */
1424         pseq=p;
1425         p+=10;
1426
1427         /* lets setup the record stuff. */
1428
1429         /* Make space for the explicit IV in case of CBC.
1430          * (this is a bit of a boundary violation, but what the heck).
1431          */
1432         if ( s->enc_write_ctx &&
1433                 (EVP_CIPHER_mode( s->enc_write_ctx->cipher ) & EVP_CIPH_CBC_MODE))
1434                 bs = EVP_CIPHER_block_size(s->enc_write_ctx->cipher);
1435         else
1436                 bs = 0;
1437
1438         wr->data=p + bs;  /* make room for IV in case of CBC */
1439         wr->length=(int)len;
1440         wr->input=(unsigned char *)buf;
1441
1442         /* we now 'read' from wr->input, wr->length bytes into
1443          * wr->data */
1444
1445         /* first we compress */
1446         if (s->compress != NULL)
1447                 {
1448                 if (!ssl3_do_compress(s))
1449                         {
1450                         SSLerr(SSL_F_DO_DTLS1_WRITE,SSL_R_COMPRESSION_FAILURE);
1451                         goto err;
1452                         }
1453                 }
1454         else
1455                 {
1456                 memcpy(wr->data,wr->input,wr->length);
1457                 wr->input=wr->data;
1458                 }
1459
1460         /* we should still have the output to wr->data and the input
1461          * from wr->input.  Length should be wr->length.
1462          * wr->data still points in the wb->buf */
1463
1464         if (mac_size != 0)
1465                 {
1466                 if(s->method->ssl3_enc->mac(s,&(p[wr->length + bs]),1) < 0)
1467                         goto err;
1468                 wr->length+=mac_size;
1469                 }
1470
1471         /* this is true regardless of mac size */
1472         wr->input=p;
1473         wr->data=p;
1474
1475
1476         /* ssl3_enc can only have an error on read */
1477         if (bs) /* bs != 0 in case of CBC */
1478                 {
1479                 RAND_pseudo_bytes(p,bs);
1480                 /* master IV and last CBC residue stand for
1481                  * the rest of randomness */
1482                 wr->length += bs;
1483                 }
1484
1485         s->method->ssl3_enc->enc(s,1);
1486
1487         /* record length after mac and block padding */
1488 /*      if (type == SSL3_RT_APPLICATION_DATA ||
1489         (type == SSL3_RT_ALERT && ! SSL_in_init(s))) */
1490
1491         /* there's only one epoch between handshake and app data */
1492
1493         s2n(s->d1->w_epoch, pseq);
1494
1495         /* XDTLS: ?? */
1496 /*      else
1497         s2n(s->d1->handshake_epoch, pseq); */
1498
1499         memcpy(pseq, &(s->s3->write_sequence[2]), 6);
1500         pseq+=6;
1501         s2n(wr->length,pseq);
1502
1503         /* we should now have
1504          * wr->data pointing to the encrypted data, which is
1505          * wr->length long */
1506         wr->type=type; /* not needed but helps for debugging */
1507         wr->length+=DTLS1_RT_HEADER_LENGTH;
1508
1509 #if 0  /* this is now done at the message layer */
1510         /* buffer the record, making it easy to handle retransmits */
1511         if ( type == SSL3_RT_HANDSHAKE || type == SSL3_RT_CHANGE_CIPHER_SPEC)
1512                 dtls1_buffer_record(s, wr->data, wr->length,
1513                         *((PQ_64BIT *)&(s->s3->write_sequence[0])));
1514 #endif
1515
1516         ssl3_record_sequence_update(&(s->s3->write_sequence[0]));
1517
1518         if (create_empty_fragment)
1519                 {
1520                 /* we are in a recursive call;
1521                  * just return the length, don't write out anything here
1522                  */
1523                 return wr->length;
1524                 }
1525
1526         /* now let's set up wb */
1527         wb->left = prefix_len + wr->length;
1528         wb->offset = 0;
1529
1530         /* memorize arguments so that ssl3_write_pending can detect bad write retries later */
1531         s->s3->wpend_tot=len;
1532         s->s3->wpend_buf=buf;
1533         s->s3->wpend_type=type;
1534         s->s3->wpend_ret=len;
1535
1536         /* we now just need to write the buffer */
1537         return ssl3_write_pending(s,type,buf,len);
1538 err:
1539         return -1;
1540         }
1541
1542
1543
1544 static int dtls1_record_replay_check(SSL *s, DTLS1_BITMAP *bitmap)
1545         {
1546         int cmp;
1547         unsigned int shift;
1548         const unsigned char *seq = s->s3->read_sequence;
1549
1550         cmp = satsub64be(seq,bitmap->max_seq_num);
1551         if (cmp > 0)
1552                 {
1553                 memcpy (s->s3->rrec.seq_num,seq,8);
1554                 return 1; /* this record in new */
1555                 }
1556         shift = -cmp;
1557         if (shift >= sizeof(bitmap->map)*8)
1558                 return 0; /* stale, outside the window */
1559         else if (bitmap->map & (1UL<<shift))
1560                 return 0; /* record previously received */
1561
1562         memcpy (s->s3->rrec.seq_num,seq,8);
1563         return 1;
1564         }
1565
1566
1567 static void dtls1_record_bitmap_update(SSL *s, DTLS1_BITMAP *bitmap)
1568         {
1569         int cmp;
1570         unsigned int shift;
1571         const unsigned char *seq = s->s3->read_sequence;
1572
1573         cmp = satsub64be(seq,bitmap->max_seq_num);
1574         if (cmp > 0)
1575                 {
1576                 shift = cmp;
1577                 if (shift < sizeof(bitmap->map)*8)
1578                         bitmap->map <<= shift, bitmap->map |= 1UL;
1579                 else
1580                         bitmap->map = 1UL;
1581                 memcpy(bitmap->max_seq_num,seq,8);
1582                 }
1583         else    {
1584                 shift = -cmp;
1585                 if (shift < sizeof(bitmap->map)*8)
1586                         bitmap->map |= 1UL<<shift;
1587                 }
1588         }
1589
1590
1591 int dtls1_dispatch_alert(SSL *s)
1592         {
1593         int i,j;
1594         void (*cb)(const SSL *ssl,int type,int val)=NULL;
1595         unsigned char buf[DTLS1_AL_HEADER_LENGTH];
1596         unsigned char *ptr = &buf[0];
1597
1598         s->s3->alert_dispatch=0;
1599
1600         memset(buf, 0x00, sizeof(buf));
1601         *ptr++ = s->s3->send_alert[0];
1602         *ptr++ = s->s3->send_alert[1];
1603
1604 #ifdef DTLS1_AD_MISSING_HANDSHAKE_MESSAGE
1605         if (s->s3->send_alert[1] == DTLS1_AD_MISSING_HANDSHAKE_MESSAGE)
1606                 {
1607                 s2n(s->d1->handshake_read_seq, ptr);
1608 #if 0
1609                 if ( s->d1->r_msg_hdr.frag_off == 0)  /* waiting for a new msg */
1610
1611                 else
1612                         s2n(s->d1->r_msg_hdr.seq, ptr); /* partial msg read */
1613 #endif
1614
1615 #if 0
1616                 fprintf(stderr, "s->d1->handshake_read_seq = %d, s->d1->r_msg_hdr.seq = %d\n",s->d1->handshake_read_seq,s->d1->r_msg_hdr.seq);
1617 #endif
1618                 l2n3(s->d1->r_msg_hdr.frag_off, ptr);
1619                 }
1620 #endif
1621
1622         i = do_dtls1_write(s, SSL3_RT_ALERT, &buf[0], sizeof(buf), 0);
1623         if (i <= 0)
1624                 {
1625                 s->s3->alert_dispatch=1;
1626                 /* fprintf( stderr, "not done with alert\n" ); */
1627                 }
1628         else
1629                 {
1630                 if (s->s3->send_alert[0] == SSL3_AL_FATAL
1631 #ifdef DTLS1_AD_MISSING_HANDSHAKE_MESSAGE
1632                     || s->s3->send_alert[1] == DTLS1_AD_MISSING_HANDSHAKE_MESSAGE
1633 #endif
1634                     )
1635                         (void)BIO_flush(s->wbio);
1636
1637                 if (s->msg_callback)
1638                         s->msg_callback(1, s->version, SSL3_RT_ALERT, s->s3->send_alert,
1639                                 2, s, s->msg_callback_arg);
1640
1641                 if (s->info_callback != NULL)
1642                         cb=s->info_callback;
1643                 else if (s->ctx->info_callback != NULL)
1644                         cb=s->ctx->info_callback;
1645
1646                 if (cb != NULL)
1647                         {
1648                         j=(s->s3->send_alert[0]<<8)|s->s3->send_alert[1];
1649                         cb(s,SSL_CB_WRITE_ALERT,j);
1650                         }
1651                 }
1652         return(i);
1653         }
1654
1655
1656 static DTLS1_BITMAP *
1657 dtls1_get_bitmap(SSL *s, SSL3_RECORD *rr, unsigned int *is_next_epoch)
1658     {
1659
1660     *is_next_epoch = 0;
1661
1662     /* In current epoch, accept HM, CCS, DATA, & ALERT */
1663     if (rr->epoch == s->d1->r_epoch)
1664         return &s->d1->bitmap;
1665
1666     /* Only HM and ALERT messages can be from the next epoch */
1667     else if (rr->epoch == (unsigned long)(s->d1->r_epoch + 1) &&
1668         (rr->type == SSL3_RT_HANDSHAKE ||
1669             rr->type == SSL3_RT_ALERT))
1670         {
1671         *is_next_epoch = 1;
1672         return &s->d1->next_bitmap;
1673         }
1674
1675     return NULL;
1676     }
1677
1678 #if 0
1679 static int
1680 dtls1_record_needs_buffering(SSL *s, SSL3_RECORD *rr, unsigned short *priority,
1681         unsigned long *offset)
1682         {
1683
1684         /* alerts are passed up immediately */
1685         if ( rr->type == SSL3_RT_APPLICATION_DATA ||
1686                 rr->type == SSL3_RT_ALERT)
1687                 return 0;
1688
1689         /* Only need to buffer if a handshake is underway.
1690          * (this implies that Hello Request and Client Hello are passed up
1691          * immediately) */
1692         if ( SSL_in_init(s))
1693                 {
1694                 unsigned char *data = rr->data;
1695                 /* need to extract the HM/CCS sequence number here */
1696                 if ( rr->type == SSL3_RT_HANDSHAKE ||
1697                         rr->type == SSL3_RT_CHANGE_CIPHER_SPEC)
1698                         {
1699                         unsigned short seq_num;
1700                         struct hm_header_st msg_hdr;
1701                         struct ccs_header_st ccs_hdr;
1702
1703                         if ( rr->type == SSL3_RT_HANDSHAKE)
1704                                 {
1705                                 dtls1_get_message_header(data, &msg_hdr);
1706                                 seq_num = msg_hdr.seq;
1707                                 *offset = msg_hdr.frag_off;
1708                                 }
1709                         else
1710                                 {
1711                                 dtls1_get_ccs_header(data, &ccs_hdr);
1712                                 seq_num = ccs_hdr.seq;
1713                                 *offset = 0;
1714                                 }
1715
1716                         /* this is either a record we're waiting for, or a
1717                          * retransmit of something we happened to previously
1718                          * receive (higher layers will drop the repeat silently */
1719                         if ( seq_num < s->d1->handshake_read_seq)
1720                                 return 0;
1721                         if (rr->type == SSL3_RT_HANDSHAKE &&
1722                                 seq_num == s->d1->handshake_read_seq &&
1723                                 msg_hdr.frag_off < s->d1->r_msg_hdr.frag_off)
1724                                 return 0;
1725                         else if ( seq_num == s->d1->handshake_read_seq &&
1726                                 (rr->type == SSL3_RT_CHANGE_CIPHER_SPEC ||
1727                                         msg_hdr.frag_off == s->d1->r_msg_hdr.frag_off))
1728                                 return 0;
1729                         else
1730                                 {
1731                                 *priority = seq_num;
1732                                 return 1;
1733                                 }
1734                         }
1735                 else /* unknown record type */
1736                         return 0;
1737                 }
1738
1739         return 0;
1740         }
1741 #endif
1742
1743 void
1744 dtls1_reset_seq_numbers(SSL *s, int rw)
1745         {
1746         unsigned char *seq;
1747         unsigned int seq_bytes = sizeof(s->s3->read_sequence);
1748
1749         if ( rw & SSL3_CC_READ)
1750                 {
1751                 seq = s->s3->read_sequence;
1752                 s->d1->r_epoch++;
1753                 memcpy(&(s->d1->bitmap), &(s->d1->next_bitmap), sizeof(DTLS1_BITMAP));
1754                 memset(&(s->d1->next_bitmap), 0x00, sizeof(DTLS1_BITMAP));
1755                 }
1756         else
1757                 {
1758                 seq = s->s3->write_sequence;
1759                 memcpy(s->d1->last_write_sequence, seq, sizeof(s->s3->write_sequence));
1760                 s->d1->w_epoch++;
1761                 }
1762
1763         memset(seq, 0x00, seq_bytes);
1764         }
1765
1766
1767 static void
1768 dtls1_clear_timeouts(SSL *s)
1769         {
1770         memset(&(s->d1->timeout), 0x00, sizeof(struct dtls1_timeout_st));
1771         }