#
# GENERIC -- Generic kernel configuration file for DragonFly/amd64
#
# Check the LINT configuration file in sys/config, for an
# exhaustive list of options.
#
# $DragonFly: src/sys/config/AMD64_GENERIC,v 1.2 2008/01/31 11:48:54 swildner Exp $

platform	pc64
machine		amd64
machine_arch	amd64
cpu		HAMMER_CPU
ident		AMD64_GENERIC
maxusers	0

makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

#options 	MATH_EMULATE		#Support for x87 emulation
options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	UFS_DIRHASH		#Improve performance on big directories
options 	MFS			#Memory Filesystem
options 	MD_ROOT			#MD is a potential root device
options 	NFS			#Network Filesystem
options 	NFS_ROOT		#NFS usable as root device, NFS required
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	PROCFS			#Process filesystem
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options		COMPAT_DF12		#Compatible with DragonFly 1.2 and earlier
options 	SCSI_DELAY=5000		#Delay (in ms) before probing SCSI
options		DEVICE_POLLING		# Support mixed interrupt-polling
					# handling of network device drivers
options 	UCONSOLE		#Allow users to grab the console
#options 	USERCONFIG		#boot -c editor
#options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	P1003_1B		#Posix P1003_1B real-time extensions
options 	_KPOSIX_PRIORITY_SCHEDULING
options 	ICMP_BANDLIM		#Rate limit bad replies
#options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~128k to driver.
options		AHD_REG_PRETTY_PRINT	# Print register bitfields in debug 
					# output.  Adds ~215k to driver.

# To make an SMP kernel both SMP and APIC_IO are usually
# specified.  SMP boxes with severely broken BIOSes which
# boot fine for non-SMP builds *might* work in SMP mode
# if you define SMP and leave APIC_IO turned off.
#
#options 	SMP			# Symmetric MultiProcessor Kernel
#options 	APIC_IO			# Symmetric (APIC) I/O

# Debugging for Development
options 	DDB
options 	DDB_TRACE
options 	INVARIANTS

device		isa
#device		eisa
#device		pci

# Floppy drives
#device		fdc0	at isa? port IO_FD1 irq 6 drq 2
#device		fd0	at fdc0 drive 0
#device		fd1	at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device		fdc0

# NEW-ATA (NATA) and ATAPI devices
#
#device		nata
#device		natadisk		# ATA disk drives
#device		natapicd		# ATAPI CDROM drives
#device		natapifd		# ATAPI floppy drives
#device		natapist		# ATAPI tape drives
#device		natapicam		# Emulate ATAPI devices as SCSI 
#device		nataraid		# support for ATA software RAID
					# controllers
#device		natausb			# ATA-over-USB support
#options 	ATA_STATIC_ID		# Static device numbering

# LEGACY ATA and ATAPI devices
#device		ata0	at isa? port IO_WD1 irq 14
#device		ata1	at isa? port IO_WD2 irq 15
#device		ata
#device		atadisk			# ATA disk drives
#device		atapicd			# ATAPI CDROM drives
#device		atapifd			# ATAPI floppy drives
#device		atapist			# ATAPI tape drives
#device		atapicam		# Emulate ATAPI devices as SCSI via CAM
#options 	ATA_STATIC_ID		#Static device numbering

# syscons is the default console driver, resembling an SCO console
#device		sc0	at isa? flags 0x100
#options 	SC_PIXEL_MODE		# add support for the raster text mode

# Floating point support - do not disable.
device		npx0	at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
# device		apm0	at nexus? disable flags 0x20 # Advanced Power Management

# Serial (COM) ports
device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
device		sio1	at isa? port IO_COM2 irq 3
device		sio2	at isa? disable port IO_COM3 irq 5
device		sio3	at isa? disable port IO_COM4 irq 9

# Parallel port
#device		ppc0	at isa? irq 7
#device		ppbus		# Parallel port bus (required)
#device		lpt		# Printer
#device		plip		# TCP/IP over parallel
#device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
pseudo-device	sl	1	# Kernel SLIP
pseudo-device	ppp	1	# Kernel PPP
pseudo-device	tun		# Packet tunnel.
pseudo-device	pty		# Pseudo-ttys (telnet etc)
pseudo-device	md		# Memory "disks"
pseudo-device	gif		# IPv6 and IPv4 tunneling
pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)