installworld: Fix auto-backup of world
[dragonfly.git] / Makefile.inc1
CommitLineData
984263bc
MD
1#
2# $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
cecff5c1
MD
3#
4# Build-time options are documented in make.conf(5).
984263bc
MD
5#
6# The intended user-driven targets are:
1397f94a 7#
984263bc 8# buildworld - rebuild *everything*, including glue to help do upgrades
1397f94a
MD
9# quickworld - skip the glue and do a depend+build on the meat
10# realquickworld - skip the glue and depend stages and just build the meat
11# crossworld - only build the glue (particularly the cross-build environment)
984263bc 12# installworld- install everything built by "buildworld"
2decc9b9
JM
13# backupworld - copies /bin /sbin /usr/bin /usr/sbin /usr/lib /usr/libexec
14# to manual backup dir
917662e5 15# rescue - create rescue image
2decc9b9
JM
16# restoreworld- installs binaries from manual backup dir to world
17# restoreworld-auto - installs binaries from auto-backup dir to world
984263bc
MD
18# most - build user commands, no libraries or include files
19# installmost - install user commands, no libraries or include files
2decc9b9
JM
20# backup-clean - delete backup from manual backup dir
21# backup-auto-clean - delete backup from auto-backup dir
984263bc
MD
22#
23# Standard targets (not defined here) are documented in the makefiles in
24# /usr/share/mk. These include:
25# obj depend all install clean cleandepend cleanobj
26
27# Put initial settings here.
28SUBDIR=
29
16dbe6a9
FT
30# /libexec/ld-elf.so.2 needs to be installed first
31# Otherwise, install(1) beeing a dynamically linked binary will fail
32# during the first upgrade from a static to a dynamic world
33.if exists(${.CURDIR}/libexec)
34SUBDIR+= libexec
35.endif
36
984263bc
MD
37# We must do share/info early so that installation of info `dir'
38# entries works correctly. Do it first since it is less likely to
39# grow dependencies on include and lib than vice versa.
40.if exists(${.CURDIR}/share/info)
41SUBDIR+= share/info
42.endif
43
44# We must do include and lib early so that the perl *.ph generation
45# works correctly as it uses the header files installed by this.
46.if exists(${.CURDIR}/include)
47SUBDIR+= include
48.endif
49.if exists(${.CURDIR}/lib)
50SUBDIR+= lib
51.endif
17d0fefe
MD
52# This exists simply to ensure that the obj dir hierarchy is
53# intact for nrelease, allowing the nrelease Makefile's to
54# reference ${.OBJDIR}.
55#
56.if exists(${.CURDIR}/nrelease)
57SUBDIR+= nrelease
58.endif
984263bc
MD
59
60.if exists(${.CURDIR}/bin)
61SUBDIR+= bin
62.endif
cecff5c1 63.if exists(${.CURDIR}/games) && !defined(NO_GAMES)
984263bc
MD
64SUBDIR+= games
65.endif
66.if exists(${.CURDIR}/gnu)
67SUBDIR+= gnu
68.endif
984263bc
MD
69.if exists(${.CURDIR}/sbin)
70SUBDIR+= sbin
71.endif
cecff5c1 72.if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
984263bc
MD
73SUBDIR+= secure
74.endif
cecff5c1 75.if exists(${.CURDIR}/share) && !defined(NO_SHARE)
984263bc
MD
76SUBDIR+= share
77.endif
78.if exists(${.CURDIR}/sys)
79SUBDIR+= sys
80.endif
81.if exists(${.CURDIR}/usr.bin)
82SUBDIR+= usr.bin
83.endif
84.if exists(${.CURDIR}/usr.sbin)
85SUBDIR+= usr.sbin
86.endif
87
984263bc
MD
88.if exists(${.CURDIR}/etc)
89SUBDIR+= etc
90.endif
91
92# These are last, since it is nice to at least get the base system
93# rebuilt before you do them.
94.if defined(LOCAL_DIRS)
95.for _DIR in ${LOCAL_DIRS}
96.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
97SUBDIR+= ${_DIR}
98.endif
99.endfor
100.endif
101
102.if defined(SUBDIR_OVERRIDE)
103SUBDIR= ${SUBDIR_OVERRIDE}
104.endif
105
106.if defined(NOCLEANDIR)
107CLEANDIR= clean cleandepend
108.else
109CLEANDIR= cleandir
110.endif
111
9974d917
SS
112.if defined(NO_CLEAN)
113NOCLEAN= # defined
114.endif
d0a8f509 115
1397f94a
MD
116# Object directory base in primary make. Note that when we rerun make
117# from inside this file we change MAKEOBJDIRPREFIX to the appropriate
118# subdirectory because the rest of the build system needs it that way.
119# The original object directory base is saved in OBJTREE.
120#
984263bc 121MAKEOBJDIRPREFIX?= /usr/obj
1397f94a
MD
122OBJTREE?= ${MAKEOBJDIRPREFIX}
123
124# Used for stage installs and pathing
125#
75d86d8d 126DESTDIRBASE:= ${OBJTREE}${.CURDIR}
1397f94a 127
c89fd520
SS
128# Remove DESTDIR from MAKEFLAGS. It is present in the environment
129# anyhow, and we need to be able to override it for stage installs
130.MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*}
131
0756733f 132# This section sets the tools used to build the world/kernel
6100d1de 133WORLD_CCVER?= gcc47
0756733f 134WORLD_LDVER?= ld.bfd
e05895f1 135WORLD_BINUTILSVER?= binutils224
ded5c503 136
7bee86c0
JM
137# Set the backup parameters if they are not already defined
138#
61443441 139WORLD_BACKUP?= /var/backups/world_backup
2decc9b9 140AUTO_BACKUP?= ${OBJTREE}/world_backup/${DESTDIR}
7bee86c0 141
984263bc
MD
142TARGET_ARCH?= ${MACHINE_ARCH}
143.if ${TARGET_ARCH} == ${MACHINE_ARCH}
144TARGET?= ${MACHINE}
145.else
146TARGET?= ${TARGET_ARCH}
147.endif
148.if make(buildworld)
149BUILD_ARCH!= sysctl -n hw.machine_arch
b2b3ffcd
SS
150
151# temporary until everybody has converted to x86_64
152.if ${BUILD_ARCH} == "amd64"
153BUILD_ARCH= x86_64
154.endif
155
984263bc
MD
156.if ${MACHINE_ARCH} != ${BUILD_ARCH}
157.error To cross-build, set TARGET_ARCH.
158.endif
159.endif
1397f94a 160
0955fd91
MD
161# Backwards compatibility with older make's or older sys.mk's. make
162# is expected to define MACHINE_PLATFORM.
163#
164.if !defined(MACHINE_PLATFORM)
165MACHINE_PLATFORM= pc32
166.endif
4d005c1d
SS
167
168# XXX this is ugly and we need to come up with a nicer solution
169.if !defined(TARGET_PLATFORM)
170.if ${TARGET_ARCH} == "i386"
171TARGET_PLATFORM= pc32
b2b3ffcd 172.elif ${TARGET_ARCH} == "x86_64"
4d005c1d
SS
173TARGET_PLATFORM= pc64
174.else
175.error Unknown target architecture.
176.endif
177.endif
0955fd91 178
5f87b7d3
SZ
179THREAD_LIB?= thread_xu
180.if ${THREAD_LIB} == "c_r"
181.if defined(NO_LIBC_R)
182.error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
183.endif
184.endif
185
1397f94a
MD
186# BTOOLS (Natively built) All non-cross-development tools that the
187# main build needs. This includes things like 'mkdir' and 'rm'.
188# We will not use the native system's exec path once we start
189# on WORLD. (bootstrap-tools and build-tools or BTOOLS)
190#
191# CTOOLS (Natively built) Cross development tools which are specific
192# to the target architecture.
193#
194# WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and
195# CTOOLS.
196#
0955fd91
MD
197# MACHINE_PLATFORM Platform Architecture we are building on
198# MACHINE Machine Architecture (usually the same as MACHINE_ARCH)
e2ea6619
MD
199# MACHINE_ARCH Cpu Architecture we are building on
200#
0955fd91
MD
201# TARGET_PLATFORM Platform Architecture we are building for
202# TARGET Machine Architecture we are building for
e2ea6619 203# TARGET_ARCH Cpu Architecture we are building for
1397f94a
MD
204#
205BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH}
206CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
207WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH}
208
79aa78bc
MD
209# The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
210# cross-tools stages to augment the existing command path to access newer
211# versions of certain utilities such as 'patch' that the cross-tools stage
212# might expect.
213#
214BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
215
1397f94a
MD
216# The strict temporary command path contains all binaries required
217# by the buildworld system after the cross-tools stage.
218#
ee48961f 219STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games:/usr/local/bin:/usr/pkg/bin
984263bc
MD
220
221TMPDIR?= /tmp
222TMPPID!= echo $$$$
984263bc
MD
223
224#
225# Building a world goes through the following stages
226#
227# 1. bootstrap-tool stage [BMAKE]
228# This stage is responsible for creating programs that
229# are needed for backward compatibility reasons. They
230# are not built as cross-tools.
231# 2. build-tool stage [TMAKE]
232# This stage is responsible for creating the object
233# tree and building any tools that are needed during
234# the build process.
235# 3. cross-tool stage [XMAKE]
236# This stage is responsible for creating any tools that
237# are needed for cross-builds. A cross-compiler is one
238# of them.
239# 4. world stage [WMAKE]
240# This stage actually builds the world.
241# 5. install stage (optional) [IMAKE]
242# This stage installs a previously built world.
243#
e92bae40
MD
244# In all cases we must carefully adjust the environment so the proper
245# tools and header files are used.
246#
247# NOTE: The M4 environment variable is used by the [f]lex binary to
248# override the location of the 'm4' binary. The override is
249# needed for certain buildworld version transitions, specifically
250# past a certain point in 3.3 because the older /usr/bin/m4 will
251# generate output that will blow up the newer [f]lex/yacc/bison
252# utilities.
253#
984263bc 254
984263bc 255# bootstrap-tool stage
1397f94a
MD
256#
257BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
258 OBJTREE=${OBJTREE} \
44831353 259 DESTDIR=${BTOOLSDEST} \
79aa78bc 260 PATH=${BTOOLSPATH}:${PATH} \
e92bae40 261 M4=${BTOOLSDEST}/usr/bin/m4 \
984263bc 262 INSTALL="sh ${.CURDIR}/tools/install.sh"
1397f94a 263
f8a75064 264BMAKE= ${BMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
e486d225 265 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
7a1f111f 266 -DNO_WERROR -DNO_NLS -DSYSBUILD
984263bc
MD
267
268# build-tool stage
1397f94a
MD
269#
270TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
271 OBJTREE=${OBJTREE} \
984263bc 272 DESTDIR= \
79aa78bc 273 PATH=${BTOOLSPATH}:${PATH} \
e92bae40 274 M4=${BTOOLSDEST}/usr/bin/m4 \
984263bc 275 INSTALL="sh ${.CURDIR}/tools/install.sh"
1397f94a 276
7a1f111f
JM
277TMAKE= ${TMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
278 -DNOSHARED -DSYSBUILD
984263bc
MD
279
280# cross-tool stage
1397f94a
MD
281#
282# note: TOOLS_PREFIX points to the obj root holding the cross
44831353
MD
283# compiler binaries, while USRDATA_PREFIX points to the obj root
284# holding the target environment (and also determines where cross-built
285# libraries, crt*.o, and include files are installed).
1397f94a
MD
286#
287XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \
288 OBJTREE=${OBJTREE} \
289 DESTDIR=${CTOOLSDEST} \
aa8dd846 290 _SHLIBDIRPREFIX=${CTOOLSDEST} \
1397f94a
MD
291 INSTALL="sh ${.CURDIR}/tools/install.sh" \
292 TOOLS_PREFIX=${CTOOLSDEST} \
79aa78bc 293 USRDATA_PREFIX=${WORLDDEST} \
e92bae40 294 M4=${BTOOLSDEST}/usr/bin/m4 \
79aa78bc 295 PATH=${BTOOLSPATH}:${PATH}
1397f94a 296
6254283a 297XMAKE= ${XMAKEENV} make -f Makefile.inc1 -DNO_GDB \
7a1f111f 298 -DBOOTSTRAPPING -DNOSHARED -DSYSBUILD
1397f94a
MD
299
300# world stage, note the strict path and note that TOOLS_PREFIX is left
301# unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
302# which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
303# for both binary and library paths, even though it is being compiled to
304# WORLDDEST. None of the programs in the world stage are ever actually
305# executed during the buildworld/installworld.
306#
307CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \
308 OBJTREE=${OBJTREE} \
309 MACHINE_ARCH=${TARGET_ARCH} \
310 MACHINE=${TARGET} \
0955fd91 311 MACHINE_PLATFORM=${TARGET_PLATFORM} \
ded5c503 312 OBJFORMAT_PATH=${CTOOLSDEST} \
ce6fa878 313 HOST_CCVER=${HOST_CCVER} \
123dec51 314 CCVER=${WORLD_CCVER} \
0756733f 315 LDVER=${WORLD_LDVER} \
123dec51 316 BINUTILSVER=${WORLD_BINUTILSVER}
984263bc 317
984263bc 318WMAKEENV= ${CROSSENV} \
1397f94a 319 DESTDIR=${WORLDDEST} \
aa8dd846 320 _SHLIBDIRPREFIX=${WORLDDEST} \
984263bc 321 INSTALL="sh ${.CURDIR}/tools/install.sh" \
e92bae40 322 M4=${BTOOLSDEST}/usr/bin/m4 \
1397f94a
MD
323 PATH=${STRICTTMPPATH}
324
7a1f111f 325WMAKE= ${WMAKEENV} make -f Makefile.inc1 -DSYSBUILD
984263bc
MD
326
327# install stage
b07b69cc 328#
984263bc 329IMAKEENV= ${CROSSENV} \
1397f94a 330 PATH=${STRICTTMPPATH}
7a1f111f 331IMAKE= ${IMAKEENV} make -f Makefile.inc1 -DSYSBUILD
984263bc
MD
332
333# kernel stage
b07b69cc
MD
334#
335KMAKEENV= ${WMAKEENV}
984263bc 336
984263bc
MD
337# buildworld
338#
339# Attempt to rebuild the entire system, with reasonable chance of
340# success, regardless of how old your existing system is.
341#
2cde9453
SS
342_worldtmp: _cleantmp _mtreetmp
343.ORDER: _cleantmp _mtreetmp
344
345_cleantmp:
984263bc
MD
346 @echo
347 @echo "--------------------------------------------------------------"
348 @echo ">>> Rebuilding the temporary build tree"
349 @echo "--------------------------------------------------------------"
350.if !defined(NOCLEAN)
1397f94a 351 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
984263bc
MD
352.else
353 # XXX - These two can depend on any header file.
354 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
355 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
356.endif
2cde9453
SS
357
358_mtreetmp:
1397f94a
MD
359 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
360.for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
361 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \
362 -p ${_dir}/ > /dev/null
363 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
364 -p ${_dir}/usr > /dev/null
984263bc 365.endfor
1397f94a
MD
366 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
367 -p ${WORLDDEST}/usr/include > /dev/null
062db326 368 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
1397f94a 369
984263bc
MD
370_bootstrap-tools:
371 @echo
372 @echo "--------------------------------------------------------------"
373 @echo ">>> stage 1: bootstrap tools"
374 @echo "--------------------------------------------------------------"
375 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
376_cleanobj:
984263bc
MD
377 @echo
378 @echo "--------------------------------------------------------------"
1397f94a 379 @echo ">>> stage 2a: cleaning up the object tree"
984263bc
MD
380 @echo "--------------------------------------------------------------"
381 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
984263bc
MD
382_obj:
383 @echo
384 @echo "--------------------------------------------------------------"
1397f94a 385 @echo ">>> stage 2b: rebuilding the object tree"
984263bc
MD
386 @echo "--------------------------------------------------------------"
387 cd ${.CURDIR}; ${WMAKE} par-obj
388_build-tools:
389 @echo
390 @echo "--------------------------------------------------------------"
1397f94a 391 @echo ">>> stage 2c: build tools"
984263bc
MD
392 @echo "--------------------------------------------------------------"
393 cd ${.CURDIR}; ${TMAKE} build-tools
394_cross-tools:
395 @echo
396 @echo "--------------------------------------------------------------"
397 @echo ">>> stage 3: cross tools"
398 @echo "--------------------------------------------------------------"
399 cd ${.CURDIR}; ${XMAKE} cross-tools
400_includes:
401 @echo
402 @echo "--------------------------------------------------------------"
1397f94a 403 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
984263bc
MD
404 @echo "--------------------------------------------------------------"
405 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
406_libraries:
407 @echo
408 @echo "--------------------------------------------------------------"
1397f94a 409 @echo ">>> stage 4b: building libraries"
984263bc
MD
410 @echo "--------------------------------------------------------------"
411 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
412_depend:
413 @echo
414 @echo "--------------------------------------------------------------"
1397f94a 415 @echo ">>> stage 4c: make dependencies"
984263bc
MD
416 @echo "--------------------------------------------------------------"
417 cd ${.CURDIR}; ${WMAKE} par-depend
418everything:
419 @echo
420 @echo "--------------------------------------------------------------"
1397f94a 421 @echo ">>> stage 4d: building everything.."
984263bc
MD
422 @echo "--------------------------------------------------------------"
423 cd ${.CURDIR}; ${WMAKE} all
24c1eacf
JM
424_bwinit:
425 @echo "--------------------------------------------------------------"
426 @echo ">>> starting buildworld target"
427 @echo "--------------------------------------------------------------"
428_bwdone:
429 @echo "--------------------------------------------------------------"
430 @echo ">>> buildworld target complete"
431 @echo "--------------------------------------------------------------"
432_qwinit:
433 @echo "--------------------------------------------------------------"
434 @echo ">>> starting quickworld target"
435 @echo "--------------------------------------------------------------"
436_qwdone:
437 @echo "--------------------------------------------------------------"
438 @echo ">>> quickworld target complete"
439 @echo "--------------------------------------------------------------"
440_iwinit:
441 @echo "--------------------------------------------------------------"
442 @echo ">>> starting installworld target"
443 @echo "--------------------------------------------------------------"
984263bc 444
1397f94a
MD
445# note: buildworld no longer depends on _cleanobj because we rm -rf the
446# entire object tree and built the bootstrap tools in a different location.
447#
448# buildworld - build everything from scratch
449# quickworld - skip the bootstrap, build, and cross-build steps
450# realquickworld - skip the bootstrap, build, crossbuild, and depend step.
451#
452# note: we include _obj in realquickworld to prevent accidental creation
453# of files in /usr/src.
984263bc 454
c08b39fe 455WMAKE_TGTS=
984263bc
MD
456.if !defined(SUBDIR_OVERRIDE)
457WMAKE_TGTS+= _worldtmp _bootstrap-tools
458.endif
1397f94a 459WMAKE_TGTS+= _obj _build-tools
984263bc
MD
460.if !defined(SUBDIR_OVERRIDE)
461WMAKE_TGTS+= _cross-tools
462.endif
463WMAKE_TGTS+= _includes _libraries _depend everything
464
24c1eacf 465buildworld: _bwinit ${WMAKE_TGTS} _bwdone
1397f94a 466
24c1eacf 467quickworld: _qwinit _mtreetmp _obj _includes _libraries _depend everything _qwdone
1397f94a 468
24c1eacf 469realquickworld: _qwinit _mtreetmp _obj _includes _libraries everything _qwdone
1397f94a
MD
470
471crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
472
24c1eacf 473.ORDER: _bwinit ${WMAKE_TGTS} _bwdone
9ce30817 474.ORDER: _obj _includes
24c1eacf 475.ORDER: _qwinit _mtreetmp _obj
61443441 476.ORDER: installcheck backupworld-auto
24c1eacf 477.ORDER: everything _qwdone
984263bc
MD
478
479#
480# installcheck
481#
c08b39fe 482# Checks to be sure system is ready for installworld
984263bc 483#
24c1eacf 484installcheck: _iwinit
984263bc 485.if !defined(NO_SENDMAIL)
3da8e88f
JM
486 @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
487 @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
984263bc 488.endif
3da8e88f
JM
489 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
490 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
491 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
108fa417 492.if !defined(OVERRIDE_CHECKS)
9b815a46 493.if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
3da8e88f 494 @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; /usr/bin/false ; esac
108fa417
MD
495 @case `uname -r` in 1.*|2.*|3.0*|3.1*|3.2*|3.3*|3.4*|3.5*|3.6*) echo "Base is too old for a normal installworld, you need to use installworld-force" ; /usr/bin/false ; esac
496.endif
9b815a46 497.endif
1516019b 498
984263bc
MD
499#
500# installworld
501#
1516019b 502# Backs up the current world if ${AUTO_BACKUP} is writable.
984263bc 503# Installs everything compiled by a 'buildworld'.
e66f5ba7
MD
504#
505# Includes sleep/sync safety before running mkinitrd.
1516019b
MD
506
507installworld: installcheck
508 -@mkdir -p ${AUTO_BACKUP} > /dev/null 2>&1
509 @cd ${.CURDIR}; \
510 (touch ${AUTO_BACKUP}/.updating > /dev/null 2>&1 && \
511 ${IMAKE} backupworld-auto) || \
512 echo "Cannot write to ${AUTO_BACKUP} - world not backed up"
513
984263bc 514 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
ec6483ce 515 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/
917662e5 516 sync
24c1eacf
JM
517 @echo "--------------------------------------------------------------"
518 @echo ">>> installworld target complete"
519 @echo "--------------------------------------------------------------"
520 @echo "If things work as expected after a full reboot, consider updating the rescue"
521 @echo "image with 'make rescue'. Do not do it until after rebooting."
917662e5 522
108fa417
MD
523installworld-force:
524 @echo "Doing a forced installworld. This will install to a temporary directory,"
525 @echo "then copy the main binaries and libraries with a static cpdup to ${DESTDIR}/"
526 @echo "and finally willl issue a normal installworld. Starting in 5 seconds.".
527 @echo "^C to abort."
528 sleep 1
529 rm -rf /usr/obj/temp > /dev/null 2>& 1 || chflags -R noschg /usr/obj/temp
530 rm -rf /usr/obj/temp
531 mkdir -p /usr/obj/temp/cpdup/bin
532 (cd ${.CURDIR}/bin/cpdup; make clean; make obj; make clean; make CFLAGS=-static all install DESTDIR=/usr/obj/temp/cpdup NOMAN=TRUE)
533 @echo "XXXXXXXXX Installing to temporary XXXXXXXXX"
534 @sleep 1
535 (cd ${.CURDIR}; ${MAKE} installworld DESTDIR=/usr/obj/temp > /dev/null 2>&1)
536 @echo "XXXXXXXXX Blasting binaries and libraries XXXXXXXXX"
537 @sleep 1
538 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/bin /bin
539 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/sbin /sbin
540 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/lib /lib
541 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/bin /usr/bin
542 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/sbin /usr/sbin
543 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/lib /usr/lib
544 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/libexec /libexec
545 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/libexec /usr/libexec
546 @echo "XXXXXXXXX Doing final installworld XXXXXXXX"
547 sleep 5
548 (cd ${.CURDIR}; ${MAKE} installworld OVERRIDE_CHECKS=TRUE)
549 (cd ${.CURDIR}; ${MAKE} upgrade OVERRIDE_CHECKS=TRUE)
550
917662e5
MD
551# Create a rescue image. We no longer do this automatically for several
552# reasons, primarily that users have had serious issue with mismatched 'vn'
553# vs the kldload image that can crash the system. But also, the rescue image
554# is intended to be a rescue image, it is a bad idea to update it at the
555# same time the world is installed.
556#
557rescue:
a93ddcbb 558 mkinitrd -b ${DESTDIR}/boot
984263bc
MD
559
560#
561# reinstall
562#
563# If you have a build server, you can NFS mount the source and obj directories
564# and do a 'make reinstall' on the *client* to install new binaries from the
565# most recent server build.
566#
567reinstall:
568 @echo "--------------------------------------------------------------"
569 @echo ">>> Making hierarchy"
570 @echo "--------------------------------------------------------------"
f8a75064 571 cd ${.CURDIR}; make -f Makefile.inc1 hierarchy
984263bc
MD
572 @echo
573 @echo "--------------------------------------------------------------"
574 @echo ">>> Installing everything.."
575 @echo "--------------------------------------------------------------"
f8a75064 576 cd ${.CURDIR}; make -f Makefile.inc1 install
984263bc 577
984263bc 578#
fc7aca3e 579# buildkernel, nativekernel, quickkernel, and installkernel
984263bc
MD
580#
581# Which kernels to build and/or install is specified by setting
582# KERNCONF. If not defined a GENERIC kernel is built/installed.
583# Only the existing (depending TARGET) config files are used
584# for building kernels and only the first of these is designated
585# as the one being installed.
586#
c2c83759
MD
587# You can specify INSTALLSTRIPPED=1 if you wish the installed
588# kernel and modules to be stripped of its debug info (required
589# symbols are left intact). You can specify INSTALLSTRIPPEDMODULES
590# if you only want to strip the modules of their debug info. These
591# only apply if you have DEBUG=-g in your kernel config or make line.
592#
984263bc
MD
593# Note that we have to use TARGET instead of TARGET_ARCH when
594# we're in kernel-land. Since only TARGET_ARCH is (expected) to
595# be set to cross-build, we have to make sure TARGET is set
596# properly.
597
598.if !defined(KERNCONF) && defined(KERNEL)
599KERNCONF= ${KERNEL}
600KERNWARN= yes
601.else
702a95cc
SS
602# XXX makeshift fix to build the right kernel for the (target) architecture
603# We should configure this in the platform files somehow
604.if ${TARGET_ARCH} == "i386"
984263bc 605KERNCONF?= GENERIC
702a95cc 606.else
b2b3ffcd 607KERNCONF?= X86_64_GENERIC
702a95cc 608.endif
984263bc
MD
609.endif
610INSTKERNNAME?= kernel
611
612KRNLSRCDIR= ${.CURDIR}/sys
4e54470f 613KRNLCONFDIR= ${KRNLSRCDIR}/config
984263bc
MD
614KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
615KERNCONFDIR?= ${KRNLCONFDIR}
616
617BUILDKERNELS=
618INSTALLKERNEL=
619.for _kernel in ${KERNCONF}
620.if exists(${KERNCONFDIR}/${_kernel})
621BUILDKERNELS+= ${_kernel}
622.if empty(INSTALLKERNEL)
623INSTALLKERNEL= ${_kernel}
624.endif
625.endif
626.endfor
627
9a359590
MD
628# kernel version numbers survive rm -rf
629#
630.for _kernel in ${BUILDKERNELS}
631.if exists(${KRNLOBJDIR}/${_kernel}/version)
632KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
633.endif
634.endfor
635
984263bc
MD
636#
637# buildkernel
638#
639# Builds all kernels defined by BUILDKERNELS.
640#
fc7aca3e 641bk_tools:
e05c8c84
MD
642 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
643 echo "You must buildworld before buildkernel. If you wish"; \
644 echo "to build a kernel using native tools, config it manually"; \
645 echo "or use the nativekernel target if you are in a rush"; \
3da8e88f 646 /usr/bin/false; \
c2c83759
MD
647 fi
648
649maybe_bk_tools:
650.for _kernel in ${BUILDKERNELS}
651 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
652 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
653 echo "The kernel was build using buildworld tools which no" ; \
654 echo "longer appear to exist, quickkernel failed!" ; \
3da8e88f 655 /usr/bin/false; \
c2c83759
MD
656 fi; \
657 fi
658.endfor
e05c8c84 659
fc7aca3e 660bk_build_list:
984263bc
MD
661.if empty(BUILDKERNELS)
662 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
603cdb58 663 @echo ">>> Did you move your kernel configs from i386/conf to config/?"
984263bc
MD
664 @false
665.endif
fc7aca3e
MD
666
667bk_kernwarn:
984263bc
MD
668.if defined(KERNWARN)
669 @echo "--------------------------------------------------------------"
670 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
671 @echo "--------------------------------------------------------------"
672 @sleep 3
673.endif
674 @echo
fc7aca3e
MD
675
676# The buildkernel target rebuilds the specified kernels from scratch
677# using the crossbuild tools generated by the last buildworld. It is
678# the safest (but also the most time consuming) way to build a new kernel.
679#
680buildkernel: bk_tools bk_build_list bk_kernwarn
984263bc
MD
681.for _kernel in ${BUILDKERNELS}
682 @echo "--------------------------------------------------------------"
683 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
684 @echo "--------------------------------------------------------------"
685 @echo "===> ${_kernel}"
fc7aca3e
MD
686.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
687 rm -rf ${KRNLOBJDIR}/${_kernel}
688.else
e05c8c84 689 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
fc7aca3e 690 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
e05c8c84 691 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
fc7aca3e 692.endif
984263bc
MD
693 mkdir -p ${KRNLOBJDIR}
694.if !defined(NO_KERNELCONFIG)
695 cd ${KRNLCONFDIR}; \
1397f94a 696 PATH=${STRICTTMPPATH} \
f8a75064 697 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
984263bc 698 ${KERNCONFDIR}/${_kernel}
9a359590
MD
699.endif
700.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
701 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
984263bc 702.endif
e05c8c84 703 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
984263bc
MD
704.if !defined(NO_KERNELDEPEND)
705 cd ${KRNLOBJDIR}/${_kernel}; \
f8a75064 706 ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend
984263bc
MD
707.endif
708 cd ${KRNLOBJDIR}/${_kernel}; \
f8a75064 709 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
984263bc
MD
710 @echo "--------------------------------------------------------------"
711 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
712 @echo "--------------------------------------------------------------"
713.endfor
714
fc7aca3e 715# The nativekernel target rebuilds the specified kernels from scratch
114580ac 716# using the system's standard compiler rather than using the crossbuild
fc7aca3e
MD
717# tools generated by the last buildworld. This is fairly safe if your
718# system is reasonable up-to-date.
e05c8c84 719#
fc7aca3e 720nativekernel: bk_build_list bk_kernwarn
e05c8c84
MD
721.for _kernel in ${BUILDKERNELS}
722 @echo "--------------------------------------------------------------"
723 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
724 @echo "--------------------------------------------------------------"
725 @echo "===> ${_kernel}"
fc7aca3e
MD
726.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
727 rm -rf ${KRNLOBJDIR}/${_kernel}
728.else
e05c8c84 729 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
fc7aca3e 730 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
e05c8c84 731 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
fc7aca3e 732.endif
e05c8c84
MD
733 mkdir -p ${KRNLOBJDIR}
734.if !defined(NO_KERNELCONFIG)
735 cd ${KRNLCONFDIR}; \
736 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
737 ${KERNCONFDIR}/${_kernel}
9a359590
MD
738.endif
739.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
740 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
e05c8c84
MD
741.endif
742 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
e05c8c84
MD
743 cd ${KRNLOBJDIR}/${_kernel}; \
744 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
f8a75064 745 make -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
e05c8c84
MD
746.if !defined(NO_KERNELDEPEND)
747 cd ${KRNLOBJDIR}/${_kernel}; \
f8a75064 748 make KERNEL=${INSTKERNNAME} depend
e05c8c84
MD
749.endif
750 cd ${KRNLOBJDIR}/${_kernel}; \
f8a75064 751 make KERNEL=${INSTKERNNAME} all
e05c8c84
MD
752 @echo "--------------------------------------------------------------"
753 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
754 @echo "--------------------------------------------------------------"
755.endfor
756
fc7aca3e
MD
757# The quickkernel target rebuilds the specified kernels as quickly
758# as possible. It will use the native tools or the buildworld cross tools
759# based on whether the kernel was originally generated via buildkernel or
760# nativekernel. Config is rerun but the object hierarchy is not rebuilt,
761# nor is the make depend step run.
984263bc 762#
c2c83759 763quickkernel: maybe_bk_tools bk_build_list bk_kernwarn
fc7aca3e
MD
764.for _kernel in ${BUILDKERNELS}
765 @echo "--------------------------------------------------------------"
766 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
767 @echo "--------------------------------------------------------------"
768 @echo "===> ${_kernel}"
769.if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
770.if !defined(NO_KERNELCONFIG)
771 cd ${KRNLCONFDIR}; \
772 PATH=${STRICTTMPPATH} \
f8a75064 773 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
fc7aca3e
MD
774 ${KERNCONFDIR}/${_kernel}
775.endif
776 cd ${KRNLOBJDIR}/${_kernel}; \
f8a75064 777 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
fc7aca3e
MD
778.else
779.if !defined(NO_KERNELCONFIG)
780 cd ${KRNLCONFDIR}; \
781 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
782 ${KERNCONFDIR}/${_kernel}
783.endif
784 cd ${KRNLOBJDIR}/${_kernel}; \
f8a75064 785 make KERNEL=${INSTKERNNAME} all
fc7aca3e
MD
786.endif
787 @echo "--------------------------------------------------------------"
788 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
789 @echo "--------------------------------------------------------------"
790.endfor
791
792
984263bc
MD
793# installkernel
794#
795# Install the kernel defined by INSTALLKERNEL
796#
797installkernel reinstallkernel:
982b0507
MD
798 @echo "--------------------------------------------------------------"
799 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
800 @echo "--------------------------------------------------------------"
801.if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
984263bc 802 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
f8a75064 803 ${IMAKEENV} make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
c2c83759
MD
804.else
805 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
f8a75064 806 make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
c2c83759 807.endif
984263bc 808
984263bc
MD
809#
810# most
811#
812# Build most of the user binaries on the existing system libs and includes.
813#
814most:
815 @echo "--------------------------------------------------------------"
816 @echo ">>> Building programs only"
817 @echo "--------------------------------------------------------------"
818.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
f8a75064 819 cd ${.CURDIR}/${_dir}; make DIRPRFX=${_dir}/ all
984263bc
MD
820.endfor
821
822#
823# installmost
824#
825# Install the binaries built by the 'most' target. This does not include
826# libraries or include files.
827#
828installmost:
829 @echo "--------------------------------------------------------------"
830 @echo ">>> Installing programs only"
831 @echo "--------------------------------------------------------------"
832.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
f8a75064 833 cd ${.CURDIR}/${_dir}; make DIRPRFX=${_dir}/ install
984263bc
MD
834.endfor
835
836#
837# ------------------------------------------------------------------------
838#
839# From here onwards are utility targets used by the 'make world' and
840# related targets. If your 'world' breaks, you may like to try to fix
841# the problem and manually run the following targets to attempt to
842# complete the build. Beware, this is *not* guaranteed to work, you
843# need to have a pretty good grip on the current state of the system
844# to attempt to manually finish it. If in doubt, 'make world' again.
845#
846
79aa78bc
MD
847# bootstrap-tools: Build all tools required to build all tools. Note that
848# order is important in a number of cases and also note that the bootstrap
849# and build tools stages have access to earlier binaries they themselves
850# had generated.
984263bc 851#
79aa78bc
MD
852# patch: older patch's do not have -i. This program must be built
853# first so other bootstrap tools that need to apply patches
854# can use it.
17030342
MD
855# [x]install: dependancies on various new install features
856# rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
857# envs are not compatible with older objformat binaries.
858#
cecff5c1 859.if exists(${.CURDIR}/games) && !defined(NO_GAMES)
984263bc
MD
860_strfile= games/fortune/strfile
861.endif
862
e92bae40
MD
863# BSTRAPDIRS1 - must be built in strict order, no parallelism
864#
f3dd7aaa
MD
865# order is very important. yacc before m4 before flex. flex exec's m4,
866# m4's parser file needs the latest byacc (insanity!).
867#
e92bae40 868BSTRAPDIRS1= ${_strfile} \
d2e9c9d8
MD
869 usr.bin/patch \
870 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo \
871 bin/test bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
872 bin/hostname bin/kill \
f3dd7aaa
MD
873 usr.bin/yacc usr.bin/m4 usr.bin/colldef \
874 usr.bin/uudecode usr.bin/xinstall \
875 usr.bin/rpcgen usr.bin/bmake usr.bin/awk usr.bin/stat \
e92bae40
MD
876 usr.bin/find usr.bin/flex
877
878# BSTRAPDIRS2 - may built in parallel
879#
880BSTRAPDIRS2= \
881 usr.bin/sed usr.bin/uname usr.bin/touch \
d2e9c9d8
MD
882 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
883 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
884 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
885 usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
886 usr.bin/cap_mkdb usr.bin/true usr.bin/false \
887 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
8c4a123d 888 usr.bin/tail usr.bin/unifdef usr.bin/tic \
d2e9c9d8
MD
889 usr.sbin/chown usr.sbin/mtree usr.sbin/config \
890 usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \
891 gnu/usr.bin/texinfo gnu/usr.bin/grep usr.bin/sort \
6fc6ffe8
FT
892 usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb \
893 usr.bin/crunch
d2e9c9d8 894
e92bae40 895bootstrap-tools: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
d2e9c9d8
MD
896 touch ${BTOOLSDEST}/.bootstrap_done
897
898bootstrap-tools-before:
062db326 899 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
d2e9c9d8 900
e92bae40
MD
901bootstrap-tools-targets1: ${BSTRAPDIRS1:S/^/bstrap-/}
902
903bootstrap-tools-targets2: ${BSTRAPDIRS2:S/^/bstrap-/}
904
905.ORDER: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
d2e9c9d8 906
e92bae40 907.ORDER: ${BSTRAPDIRS1:S/^/bstrap-/}
d2e9c9d8 908
e92bae40 909.for _tool in ${BSTRAPDIRS1} ${BSTRAPDIRS2}
d2e9c9d8 910bstrap-${_tool}!
1397f94a 911 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
984263bc 912 cd ${.CURDIR}/${_tool}; \
f8a75064
JM
913 make DIRPRFX=${_tool}/ obj; \
914 make DIRPRFX=${_tool}/ depend; \
915 make DIRPRFX=${_tool}/ all; \
916 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
984263bc
MD
917.endfor
918
bceb727e 919# build-tools: Build special purpose build tools.
984263bc 920#
1397f94a
MD
921# XXX we may be able to remove or consolidate this into bootstrap-tools
922# now that we have the native helper (.nx/.no) infrastructure.
923#
cecff5c1 924.if exists(${.CURDIR}/share) && !defined(NO_SHARE)
984263bc
MD
925_share= share/syscons/scrnmaps
926.endif
927
b399af11
JM
928_gcc_common_cross= lib/libz gnu/usr.bin/gmp gnu/usr.bin/mpfr gnu/usr.bin/mpc
929.if !defined(NO_GCC50)
930_gcc50_cross= gnu/usr.bin/cc50
931_gcc50_tools= gnu/usr.bin/cc50/cc_prep gnu/usr.bin/cc50/cc_tools
6100d1de 932.endif
b399af11 933_gcc47_cross= gnu/usr.bin/cc47
f0140465 934_gcc47_tools= gnu/usr.bin/cc47/cc_prep gnu/usr.bin/cc47/cc_tools
c97b9141 935_custom_cross= libexec/customcc
123dec51 936_binutils= gnu/usr.bin/${WORLD_BINUTILSVER}
17030342 937
b399af11 938BTOOLSDIRS= ${_gcc47_tools} ${_gcc50_tools} ${_share}
d2e9c9d8
MD
939
940build-tools: build-tools-targets
941 touch ${BTOOLSDEST}/.build_done
942
943build-tools-targets: ${BTOOLSDIRS:S/^/btools-/}
944
f0140465 945.ORDER: ${_gcc47_tools:S/^/btools-/}
b399af11 946.ORDER: ${_gcc50_tools:S/^/btools-/}
9ba72882 947
d2e9c9d8
MD
948.for _tool in ${BTOOLSDIRS}
949btools-${_tool}!
1397f94a 950 ${ECHODIR} "===> ${_tool} (build-tools)"; \
984263bc 951 cd ${.CURDIR}/${_tool}; \
f8a75064
JM
952 make DIRPRFX=${_tool}/ obj; \
953 make DIRPRFX=${_tool}/ depend; \
954 make DIRPRFX=${_tool}/ all; \
955 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
984263bc
MD
956.endfor
957
958#
959# cross-tools: Build cross-building tools
960#
984263bc
MD
961.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
962_btxld= usr.sbin/btxld
963.endif
964
fc7e83fa
FT
965CTOOLSDIRS= ${_btxld} ${_binutils} \
966 usr.bin/objformat usr.bin/crunch/crunchide \
967 ${_gcc_common_cross} \
b399af11 968 ${_gcc47_cross} ${_gcc50_cross} ${_custom_cross}
d2e9c9d8
MD
969
970cross-tools: cross-tools-targets
971 touch ${CTOOLSDEST}/.cross_done
972
973cross-tools-targets: ${CTOOLSDIRS:S/^/ctools-/}
974
975.for _tool in ${CTOOLSDIRS}
976ctools-${_tool}!
1397f94a 977 ${ECHODIR} "===> ${_tool} (cross-tools)"; \
984263bc 978 cd ${.CURDIR}/${_tool}; \
f8a75064
JM
979 make DIRPRFX=${_tool}/ obj; \
980 make DIRPRFX=${_tool}/ depend; \
981 make DIRPRFX=${_tool}/ all; \
982 make DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
984263bc
MD
983.endfor
984
985#
986# hierarchy - ensure that all the needed directories are present
987#
988hierarchy:
f8a75064 989 cd ${.CURDIR}/etc; make distrib-dirs
984263bc
MD
990
991#
992# libraries - build all libraries, and install them under ${DESTDIR}.
993#
994# The list of libraries with dependents (${_prebuild_libs}) and their
995# interdependencies (__L) are built automatically by the
996# ${.CURDIR}/tools/make_libdeps.sh script.
997#
5228fe46
MD
998# .makeenv does not work when bootstrapping from 4.x, so we must be sure
999# to specify the correct CCVER or 'cc' will not exec the correct compiler.
1000#
984263bc 1001libraries:
ddf7cc86 1002 cd ${.CURDIR}; \
f0140465 1003 HOST_CCVER=${HOST_CCVER} CCVER=gcc47 \
7a1f111f 1004 make -f Makefile.inc1 _startup_libs47 -DSYSBUILD;
b399af11 1005.if !defined(NO_GCC50)
4f5ea479 1006 cd ${.CURDIR}; \
b399af11 1007 HOST_CCVER=${HOST_CCVER} CCVER=gcc50 \
7a1f111f 1008 make -f Makefile.inc1 _startup_libs50 -DSYSBUILD;
6100d1de 1009.endif
29d48e65 1010 cd ${.CURDIR}; \
7a1f111f
JM
1011 make -f Makefile.inc1 _startup_libs -DSYSBUILD; \
1012 make -f Makefile.inc1 _prebuild_libs -DSYSBUILD; \
1013 make -f Makefile.inc1 _generic_libs -DSYSBUILD;
e05c8c84 1014 touch ${WORLDDEST}/.libraries_done
984263bc
MD
1015
1016# These dependencies are not automatically generated:
1017#
fd8b66cd 1018# gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
4f5ea479
SS
1019# shared libraries for ELF. The target for _startup_libsXX is
1020# specifically built using gccXX.
984263bc 1021#
64ed7155
JM
1022_startup_libs47= gnu/usr.bin/cc47/cc_prep \
1023 gnu/usr.bin/cc47/cc_tools \
1024 gnu/lib/gcc47/csu \
f0140465
JM
1025 gnu/lib/gcc47/libgcc \
1026 gnu/lib/gcc47/libgcc_eh \
1027 gnu/lib/gcc47/libgcc_pic
b399af11
JM
1028_startup_libs50= gnu/usr.bin/cc50/cc_prep \
1029 gnu/usr.bin/cc50/cc_tools \
1030 gnu/lib/gcc50/csu \
1031 gnu/lib/gcc50/libgcc \
1032 gnu/lib/gcc50/libgcc_eh \
1033 gnu/lib/gcc50/libgcc_pic
e1da6819 1034_startup_libs= lib/csu lib/libc lib/libc_rtld
984263bc 1035
59392a00 1036_prebuild_libs= lib/libbz2 lib/liblzma lib/libz
0b153c05 1037_prebuild_libs+= lib/libutil
984263bc
MD
1038
1039_generic_libs= gnu/lib
1040
984263bc 1041_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
6d0e03f5 1042 lib/libncurses/libncurses lib/libopie
984263bc
MD
1043
1044lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
984263bc
MD
1045
1046_generic_libs+= lib
1047
cecff5c1 1048.if !defined(NO_CRYPT)
984263bc
MD
1049.if !defined(NO_OPENSSL)
1050_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl
1051.if !defined(NO_OPENSSH)
1052_prebuild_libs+= secure/lib/libssh
1053secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
1054.endif
1055.endif
1056_generic_libs+= secure/lib
1057.endif
1058
6d0e03f5
MD
1059_prebuild_libs+= lib/libradius lib/libsbuf lib/libtacplus lib/libm \
1060 lib/libpam lib/libypclnt lib/lib${THREAD_LIB} \
1061 lib/libpthread lib/libprop lib/libdevattr
1062
f506e60d 1063_generic_libs+= usr.bin/flex/lib
984263bc 1064
b399af11 1065.for _lib in ${_startup_libs47} ${_startup_libs50} \
4db2a28c 1066 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
984263bc
MD
1067${_lib}__L: .PHONY
1068.if exists(${.CURDIR}/${_lib})
1069 ${ECHODIR} "===> ${_lib}"; \
1070 cd ${.CURDIR}/${_lib}; \
f8a75064
JM
1071 make DIRPRFX=${_lib}/ depend; \
1072 make DIRPRFX=${_lib}/ all; \
1073 make DIRPRFX=${_lib}/ install
984263bc
MD
1074.endif
1075.endfor
1076
1077_startup_libs: ${_startup_libs:S/$/__L/}
f0140465 1078_startup_libs47: ${_startup_libs47:S/$/__L/}
b399af11 1079_startup_libs50: ${_startup_libs50:S/$/__L/}
984263bc
MD
1080_prebuild_libs: ${_prebuild_libs:S/$/__L/}
1081_generic_libs: ${_generic_libs:S/$/__L/}
1082
1397f94a
MD
1083# library targets must be ordered because there are inter-library
1084# races (e.g. generation of tconfig.h)
1085#
f0140465 1086.ORDER: ${_startup_libs47:S/$/__L/}
b399af11 1087.ORDER: ${_startup_libs50:S/$/__L/}
1397f94a
MD
1088.ORDER: ${_startup_libs:S/$/__L/}
1089.ORDER: ${_prebuild_libs:S/$/__L/}
1090.ORDER: ${_generic_libs:S/$/__L/}
1091
1092.for __target in clean cleandepend cleandir obj depend includes
984263bc
MD
1093.for entry in ${SUBDIR}
1094${entry}.${__target}__D: .PHONY
1095 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
1096 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
1097 edir=${entry}.${MACHINE_ARCH}; \
1098 cd ${.CURDIR}/$${edir}; \
1099 else \
1100 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
1101 edir=${entry}; \
1102 cd ${.CURDIR}/$${edir}; \
1103 fi; \
f8a75064 1104 make ${__target} DIRPRFX=${DIRPRFX}$${edir}/
984263bc
MD
1105.endfor
1106par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
1397f94a 1107.ORDER: ${SUBDIR:S/$/.${__target}__D/}
984263bc 1108.endfor
1397f94a 1109.ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
984263bc 1110
cb0f1574
MD
1111# The wmake target is used by /usr/bin/wmake to run make in a
1112# world build environment.
1113#
1114wmake:
7a1f111f 1115 @echo '${WMAKEENV} make ${WMAKE_ARGS} -DSYSBUILD'
cb0f1574 1116
5c7da0d7
MD
1117wmakeenv:
1118 @echo '${WMAKEENV} /bin/sh'
1119
1397f94a 1120bmake:
7a1f111f 1121 @echo '${BMAKEENV} make ${BMAKE_ARGS} -DSYSBUILD'
1397f94a 1122
17030342
MD
1123bmakeenv:
1124 @echo '${BMAKEENV} /bin/sh'
1125
1397f94a 1126tmake:
7a1f111f 1127 @echo '${TMAKEENV} make ${TMAKE_ARGS} -DSYSBUILD'
1397f94a 1128
17030342
MD
1129tmakeenv:
1130 @echo '${TMAKEENV} /bin/sh'
1131
66834c05 1132xmake:
7a1f111f 1133 @echo '${XMAKEENV} make ${XMAKE_ARGS} -DSYSBUILD'
66834c05
SS
1134
1135xmakeenv:
1136 @echo '${XMAKEENV} /bin/sh'
1137
2decc9b9 1138backupworld: backup-clean
7bee86c0 1139 @mkdir -p ${WORLD_BACKUP}
2decc9b9
JM
1140.if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1141 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1142 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1143 tar -czf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1144 --options gzip:compression-level=1 \
1145 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1146.endif
61443441
JM
1147
1148backupworld-auto:
2decc9b9
JM
1149.if !defined(NO_BACKUP)
1150 rm -f ${AUTO_BACKUP}/binaries.tar.gz
61443441 1151 @mkdir -p ${AUTO_BACKUP}
2decc9b9
JM
1152.if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1153 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1154 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
5738cc3a 1155 /usr/bin/tar -czf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
2decc9b9
JM
1156 --options gzip:compression-level=1 \
1157 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1158.endif
aaae54f7 1159.endif
7bee86c0 1160
2decc9b9
JM
1161backup-auto-clean:
1162 rm -f ${AUTO_BACKUP}/binaries.tar.gz
1163
1164backup-clean:
1165 rm -f ${WORLD_BACKUP}/binaries.tar.gz
1166
7bee86c0 1167restoreworld:
2decc9b9 1168.if !exists(${WORLD_BACKUP}/binaries.tar.gz)
7bee86c0
JM
1169 @echo "There does not seem to be a valid archive present."
1170.else
61443441 1171 @echo "Restoring system binaries from manual backup archive..."
2decc9b9
JM
1172 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1173 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1174 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1175 tar -xzf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
7bee86c0
JM
1176.endif
1177
61443441 1178restoreworld-auto:
2decc9b9 1179.if !exists(${AUTO_BACKUP}/binaries.tar.gz)
61443441
JM
1180 @echo "There does not seem to be a valid archive present."
1181.else
1182 @echo "Restoring system binaries from auto-backup archive..."
2decc9b9
JM
1183 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1184 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1185 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1186 tar -xzf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
61443441
JM
1187.endif
1188
3da8e88f
JM
1189# Take advantage of bmake error response
1190#
1191MAKE_PRINT_VAR_ON_ERROR= \
1192 .CURDIR \
1193 .OBJDIR \
3da8e88f
JM
1194 LD_LIBRARY_PATH \
1195 MACHINE_ARCH \
1196 MACHINE \
1197 MAKEFILE \
1198 .TARGETS \
1199 .ERROR_TARGET \
61443441 1200 .MAKE.LEVEL
3da8e88f 1201
984263bc 1202.include <bsd.subdir.mk>