Import OpenSSL-1.0.1d.
[dragonfly.git] / crypto / openssl / crypto / sha / asm / sha512-x86_64.pl
CommitLineData
5febbddd
PA
1#!/usr/bin/env perl
2#
3# ====================================================================
4# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
5# project. Rights for redistribution and usage in source and binary
6# forms are granted according to the OpenSSL license.
7# ====================================================================
8#
9# sha256/512_block procedure for x86_64.
10#
11# 40% improvement over compiler-generated code on Opteron. On EM64T
12# sha256 was observed to run >80% faster and sha512 - >40%. No magical
13# tricks, just straight implementation... I really wonder why gcc
14# [being armed with inline assembler] fails to generate as fast code.
15# The only thing which is cool about this module is that it's very
16# same instruction sequence used for both SHA-256 and SHA-512. In
17# former case the instructions operate on 32-bit operands, while in
18# latter - on 64-bit ones. All I had to do is to get one flavor right,
19# the other one passed the test right away:-)
20#
21# sha256_block runs in ~1005 cycles on Opteron, which gives you
22# asymptotic performance of 64*1000/1005=63.7MBps times CPU clock
23# frequency in GHz. sha512_block runs in ~1275 cycles, which results
24# in 128*1000/1275=100MBps per GHz. Is there room for improvement?
25# Well, if you compare it to IA-64 implementation, which maintains
26# X[16] in register bank[!], tends to 4 instructions per CPU clock
27# cycle and runs in 1003 cycles, 1275 is very good result for 3-way
28# issue Opteron pipeline and X[16] maintained in memory. So that *if*
29# there is a way to improve it, *then* the only way would be to try to
30# offload X[16] updates to SSE unit, but that would require "deeper"
31# loop unroll, which in turn would naturally cause size blow-up, not
32# to mention increased complexity! And once again, only *if* it's
33# actually possible to noticeably improve overall ILP, instruction
34# level parallelism, on a given CPU implementation in this case.
35#
36# Special note on Intel EM64T. While Opteron CPU exhibits perfect
37# perfromance ratio of 1.5 between 64- and 32-bit flavors [see above],
38# [currently available] EM64T CPUs apparently are far from it. On the
39# contrary, 64-bit version, sha512_block, is ~30% *slower* than 32-bit
40# sha256_block:-( This is presumably because 64-bit shifts/rotates
41# apparently are not atomic instructions, but implemented in microcode.
42
43$flavour = shift;
44$output = shift;
45if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
46
47$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
48
49$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
50( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
51( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
52die "can't locate x86_64-xlate.pl";
53
9bb344e0
PA
54open OUT,"| \"$^X\" $xlate $flavour $output";
55*STDOUT=*OUT;
5febbddd
PA
56
57if ($output =~ /512/) {
58 $func="sha512_block_data_order";
59 $TABLE="K512";
60 $SZ=8;
61 @ROT=($A,$B,$C,$D,$E,$F,$G,$H)=("%rax","%rbx","%rcx","%rdx",
62 "%r8", "%r9", "%r10","%r11");
63 ($T1,$a0,$a1,$a2)=("%r12","%r13","%r14","%r15");
64 @Sigma0=(28,34,39);
65 @Sigma1=(14,18,41);
66 @sigma0=(1, 8, 7);
67 @sigma1=(19,61, 6);
68 $rounds=80;
69} else {
70 $func="sha256_block_data_order";
71 $TABLE="K256";
72 $SZ=4;
73 @ROT=($A,$B,$C,$D,$E,$F,$G,$H)=("%eax","%ebx","%ecx","%edx",
74 "%r8d","%r9d","%r10d","%r11d");
75 ($T1,$a0,$a1,$a2)=("%r12d","%r13d","%r14d","%r15d");
76 @Sigma0=( 2,13,22);
77 @Sigma1=( 6,11,25);
78 @sigma0=( 7,18, 3);
79 @sigma1=(17,19,10);
80 $rounds=64;
81}
82
83$ctx="%rdi"; # 1st arg
84$round="%rdi"; # zaps $ctx
85$inp="%rsi"; # 2nd arg
86$Tbl="%rbp";
87
88$_ctx="16*$SZ+0*8(%rsp)";
89$_inp="16*$SZ+1*8(%rsp)";
90$_end="16*$SZ+2*8(%rsp)";
91$_rsp="16*$SZ+3*8(%rsp)";
92$framesz="16*$SZ+4*8";
93
94
95sub ROUND_00_15()
96{ my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_;
97
98$code.=<<___;
672590bc 99 ror \$`$Sigma1[2]-$Sigma1[1]`,$a0
5febbddd 100 mov $f,$a2
672590bc 101 mov $T1,`$SZ*($i&0xf)`(%rsp)
5febbddd 102
672590bc
PA
103 ror \$`$Sigma0[2]-$Sigma0[1]`,$a1
104 xor $e,$a0
5febbddd
PA
105 xor $g,$a2 # f^g
106
672590bc
PA
107 ror \$`$Sigma1[1]-$Sigma1[0]`,$a0
108 add $h,$T1 # T1+=h
109 xor $a,$a1
110
111 add ($Tbl,$round,$SZ),$T1 # T1+=K[round]
5febbddd 112 and $e,$a2 # (f^g)&e
672590bc 113 mov $b,$h
5febbddd 114
672590bc
PA
115 ror \$`$Sigma0[1]-$Sigma0[0]`,$a1
116 xor $e,$a0
5febbddd 117 xor $g,$a2 # Ch(e,f,g)=((f^g)&e)^g
5febbddd 118
672590bc
PA
119 xor $c,$h # b^c
120 xor $a,$a1
5febbddd 121 add $a2,$T1 # T1+=Ch(e,f,g)
672590bc 122 mov $b,$a2
5febbddd 123
672590bc
PA
124 ror \$$Sigma1[0],$a0 # Sigma1(e)
125 and $a,$h # h=(b^c)&a
126 and $c,$a2 # b&c
5febbddd 127
672590bc
PA
128 ror \$$Sigma0[0],$a1 # Sigma0(a)
129 add $a0,$T1 # T1+=Sigma1(e)
130 add $a2,$h # h+=b&c (completes +=Maj(a,b,c)
5febbddd 131
5febbddd 132 add $T1,$d # d+=T1
5febbddd 133 add $T1,$h # h+=T1
5febbddd 134 lea 1($round),$round # round++
672590bc 135 add $a1,$h # h+=Sigma0(a)
5febbddd 136
5febbddd
PA
137___
138}
139
140sub ROUND_16_XX()
141{ my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_;
142
143$code.=<<___;
144 mov `$SZ*(($i+1)&0xf)`(%rsp),$a0
672590bc
PA
145 mov `$SZ*(($i+14)&0xf)`(%rsp),$a1
146 mov $a0,$T1
147 mov $a1,$a2
5febbddd 148
672590bc
PA
149 ror \$`$sigma0[1]-$sigma0[0]`,$T1
150 xor $a0,$T1
5febbddd 151 shr \$$sigma0[2],$a0
5febbddd 152
672590bc
PA
153 ror \$$sigma0[0],$T1
154 xor $T1,$a0 # sigma0(X[(i+1)&0xf])
155 mov `$SZ*(($i+9)&0xf)`(%rsp),$T1
5febbddd 156
672590bc
PA
157 ror \$`$sigma1[1]-$sigma1[0]`,$a2
158 xor $a1,$a2
159 shr \$$sigma1[2],$a1
5febbddd 160
672590bc 161 ror \$$sigma1[0],$a2
5febbddd 162 add $a0,$T1
672590bc 163 xor $a2,$a1 # sigma1(X[(i+14)&0xf])
5febbddd
PA
164
165 add `$SZ*($i&0xf)`(%rsp),$T1
672590bc
PA
166 mov $e,$a0
167 add $a1,$T1
168 mov $a,$a1
5febbddd
PA
169___
170 &ROUND_00_15(@_);
171}
172
173$code=<<___;
174.text
175
176.globl $func
177.type $func,\@function,4
178.align 16
179$func:
180 push %rbx
181 push %rbp
182 push %r12
183 push %r13
184 push %r14
185 push %r15
186 mov %rsp,%r11 # copy %rsp
187 shl \$4,%rdx # num*16
188 sub \$$framesz,%rsp
189 lea ($inp,%rdx,$SZ),%rdx # inp+num*16*$SZ
190 and \$-64,%rsp # align stack frame
191 mov $ctx,$_ctx # save ctx, 1st arg
192 mov $inp,$_inp # save inp, 2nd arh
193 mov %rdx,$_end # save end pointer, "3rd" arg
194 mov %r11,$_rsp # save copy of %rsp
195.Lprologue:
196
197 lea $TABLE(%rip),$Tbl
198
199 mov $SZ*0($ctx),$A
200 mov $SZ*1($ctx),$B
201 mov $SZ*2($ctx),$C
202 mov $SZ*3($ctx),$D
203 mov $SZ*4($ctx),$E
204 mov $SZ*5($ctx),$F
205 mov $SZ*6($ctx),$G
206 mov $SZ*7($ctx),$H
207 jmp .Lloop
208
209.align 16
210.Lloop:
211 xor $round,$round
212___
213 for($i=0;$i<16;$i++) {
214 $code.=" mov $SZ*$i($inp),$T1\n";
672590bc
PA
215 $code.=" mov @ROT[4],$a0\n";
216 $code.=" mov @ROT[0],$a1\n";
5febbddd
PA
217 $code.=" bswap $T1\n";
218 &ROUND_00_15($i,@ROT);
219 unshift(@ROT,pop(@ROT));
220 }
221$code.=<<___;
222 jmp .Lrounds_16_xx
223.align 16
224.Lrounds_16_xx:
225___
226 for(;$i<32;$i++) {
227 &ROUND_16_XX($i,@ROT);
228 unshift(@ROT,pop(@ROT));
229 }
230
231$code.=<<___;
232 cmp \$$rounds,$round
233 jb .Lrounds_16_xx
234
235 mov $_ctx,$ctx
236 lea 16*$SZ($inp),$inp
237
238 add $SZ*0($ctx),$A
239 add $SZ*1($ctx),$B
240 add $SZ*2($ctx),$C
241 add $SZ*3($ctx),$D
242 add $SZ*4($ctx),$E
243 add $SZ*5($ctx),$F
244 add $SZ*6($ctx),$G
245 add $SZ*7($ctx),$H
246
247 cmp $_end,$inp
248
249 mov $A,$SZ*0($ctx)
250 mov $B,$SZ*1($ctx)
251 mov $C,$SZ*2($ctx)
252 mov $D,$SZ*3($ctx)
253 mov $E,$SZ*4($ctx)
254 mov $F,$SZ*5($ctx)
255 mov $G,$SZ*6($ctx)
256 mov $H,$SZ*7($ctx)
257 jb .Lloop
258
259 mov $_rsp,%rsi
260 mov (%rsi),%r15
261 mov 8(%rsi),%r14
262 mov 16(%rsi),%r13
263 mov 24(%rsi),%r12
264 mov 32(%rsi),%rbp
265 mov 40(%rsi),%rbx
266 lea 48(%rsi),%rsp
267.Lepilogue:
268 ret
269.size $func,.-$func
270___
271
272if ($SZ==4) {
273$code.=<<___;
274.align 64
275.type $TABLE,\@object
276$TABLE:
277 .long 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5
278 .long 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5
279 .long 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3
280 .long 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174
281 .long 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc
282 .long 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da
283 .long 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7
284 .long 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967
285 .long 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13
286 .long 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85
287 .long 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3
288 .long 0xd192e819,0xd6990624,0xf40e3585,0x106aa070
289 .long 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5
290 .long 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3
291 .long 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208
292 .long 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2
293___
294} else {
295$code.=<<___;
296.align 64
297.type $TABLE,\@object
298$TABLE:
299 .quad 0x428a2f98d728ae22,0x7137449123ef65cd
300 .quad 0xb5c0fbcfec4d3b2f,0xe9b5dba58189dbbc
301 .quad 0x3956c25bf348b538,0x59f111f1b605d019
302 .quad 0x923f82a4af194f9b,0xab1c5ed5da6d8118
303 .quad 0xd807aa98a3030242,0x12835b0145706fbe
304 .quad 0x243185be4ee4b28c,0x550c7dc3d5ffb4e2
305 .quad 0x72be5d74f27b896f,0x80deb1fe3b1696b1
306 .quad 0x9bdc06a725c71235,0xc19bf174cf692694
307 .quad 0xe49b69c19ef14ad2,0xefbe4786384f25e3
308 .quad 0x0fc19dc68b8cd5b5,0x240ca1cc77ac9c65
309 .quad 0x2de92c6f592b0275,0x4a7484aa6ea6e483
310 .quad 0x5cb0a9dcbd41fbd4,0x76f988da831153b5
311 .quad 0x983e5152ee66dfab,0xa831c66d2db43210
312 .quad 0xb00327c898fb213f,0xbf597fc7beef0ee4
313 .quad 0xc6e00bf33da88fc2,0xd5a79147930aa725
314 .quad 0x06ca6351e003826f,0x142929670a0e6e70
315 .quad 0x27b70a8546d22ffc,0x2e1b21385c26c926
316 .quad 0x4d2c6dfc5ac42aed,0x53380d139d95b3df
317 .quad 0x650a73548baf63de,0x766a0abb3c77b2a8
318 .quad 0x81c2c92e47edaee6,0x92722c851482353b
319 .quad 0xa2bfe8a14cf10364,0xa81a664bbc423001
320 .quad 0xc24b8b70d0f89791,0xc76c51a30654be30
321 .quad 0xd192e819d6ef5218,0xd69906245565a910
322 .quad 0xf40e35855771202a,0x106aa07032bbd1b8
323 .quad 0x19a4c116b8d2d0c8,0x1e376c085141ab53
324 .quad 0x2748774cdf8eeb99,0x34b0bcb5e19b48a8
325 .quad 0x391c0cb3c5c95a63,0x4ed8aa4ae3418acb
326 .quad 0x5b9cca4f7763e373,0x682e6ff3d6b2b8a3
327 .quad 0x748f82ee5defb2fc,0x78a5636f43172f60
328 .quad 0x84c87814a1f0ab72,0x8cc702081a6439ec
329 .quad 0x90befffa23631e28,0xa4506cebde82bde9
330 .quad 0xbef9a3f7b2c67915,0xc67178f2e372532b
331 .quad 0xca273eceea26619c,0xd186b8c721c0c207
332 .quad 0xeada7dd6cde0eb1e,0xf57d4f7fee6ed178
333 .quad 0x06f067aa72176fba,0x0a637dc5a2c898a6
334 .quad 0x113f9804bef90dae,0x1b710b35131c471b
335 .quad 0x28db77f523047d84,0x32caab7b40c72493
336 .quad 0x3c9ebe0a15c9bebc,0x431d67c49c100d4c
337 .quad 0x4cc5d4becb3e42b6,0x597f299cfc657e2a
338 .quad 0x5fcb6fab3ad6faec,0x6c44198c4a475817
339___
340}
341
342# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame,
343# CONTEXT *context,DISPATCHER_CONTEXT *disp)
344if ($win64) {
345$rec="%rcx";
346$frame="%rdx";
347$context="%r8";
348$disp="%r9";
349
350$code.=<<___;
351.extern __imp_RtlVirtualUnwind
352.type se_handler,\@abi-omnipotent
353.align 16
354se_handler:
355 push %rsi
356 push %rdi
357 push %rbx
358 push %rbp
359 push %r12
360 push %r13
361 push %r14
362 push %r15
363 pushfq
364 sub \$64,%rsp
365
366 mov 120($context),%rax # pull context->Rax
367 mov 248($context),%rbx # pull context->Rip
368
369 lea .Lprologue(%rip),%r10
370 cmp %r10,%rbx # context->Rip<.Lprologue
371 jb .Lin_prologue
372
373 mov 152($context),%rax # pull context->Rsp
374
375 lea .Lepilogue(%rip),%r10
376 cmp %r10,%rbx # context->Rip>=.Lepilogue
377 jae .Lin_prologue
378
379 mov 16*$SZ+3*8(%rax),%rax # pull $_rsp
380 lea 48(%rax),%rax
381
382 mov -8(%rax),%rbx
383 mov -16(%rax),%rbp
384 mov -24(%rax),%r12
385 mov -32(%rax),%r13
386 mov -40(%rax),%r14
387 mov -48(%rax),%r15
388 mov %rbx,144($context) # restore context->Rbx
389 mov %rbp,160($context) # restore context->Rbp
390 mov %r12,216($context) # restore context->R12
391 mov %r13,224($context) # restore context->R13
392 mov %r14,232($context) # restore context->R14
393 mov %r15,240($context) # restore context->R15
394
395.Lin_prologue:
396 mov 8(%rax),%rdi
397 mov 16(%rax),%rsi
398 mov %rax,152($context) # restore context->Rsp
399 mov %rsi,168($context) # restore context->Rsi
400 mov %rdi,176($context) # restore context->Rdi
401
402 mov 40($disp),%rdi # disp->ContextRecord
403 mov $context,%rsi # context
404 mov \$154,%ecx # sizeof(CONTEXT)
405 .long 0xa548f3fc # cld; rep movsq
406
407 mov $disp,%rsi
408 xor %rcx,%rcx # arg1, UNW_FLAG_NHANDLER
409 mov 8(%rsi),%rdx # arg2, disp->ImageBase
410 mov 0(%rsi),%r8 # arg3, disp->ControlPc
411 mov 16(%rsi),%r9 # arg4, disp->FunctionEntry
412 mov 40(%rsi),%r10 # disp->ContextRecord
413 lea 56(%rsi),%r11 # &disp->HandlerData
414 lea 24(%rsi),%r12 # &disp->EstablisherFrame
415 mov %r10,32(%rsp) # arg5
416 mov %r11,40(%rsp) # arg6
417 mov %r12,48(%rsp) # arg7
418 mov %rcx,56(%rsp) # arg8, (NULL)
419 call *__imp_RtlVirtualUnwind(%rip)
420
421 mov \$1,%eax # ExceptionContinueSearch
422 add \$64,%rsp
423 popfq
424 pop %r15
425 pop %r14
426 pop %r13
427 pop %r12
428 pop %rbp
429 pop %rbx
430 pop %rdi
431 pop %rsi
432 ret
433.size se_handler,.-se_handler
434
435.section .pdata
436.align 4
437 .rva .LSEH_begin_$func
438 .rva .LSEH_end_$func
439 .rva .LSEH_info_$func
440
441.section .xdata
442.align 8
443.LSEH_info_$func:
444 .byte 9,0,0,0
445 .rva se_handler
446___
447}
448
449$code =~ s/\`([^\`]*)\`/eval $1/gem;
450print $code;
451close STDOUT;