gdb: GC old versions
[dragonfly.git] / contrib / gdb-7 / gdb / gdbthread.h
CommitLineData
5796c8dc
SS
1/* Multi-process/thread control defs for GDB, the GNU debugger.
2 Copyright (C) 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1997, 1998, 1999,
3 2000, 2007, 2008, 2009 Free Software Foundation, Inc.
4 Contributed by Lynx Real-Time Systems, Inc. Los Gatos, CA.
5
6
7 This file is part of GDB.
8
9 This program is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 3 of the License, or
12 (at your option) any later version.
13
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
18
19 You should have received a copy of the GNU General Public License
20 along with this program. If not, see <http://www.gnu.org/licenses/>. */
21
22#ifndef GDBTHREAD_H
23#define GDBTHREAD_H
24
25struct symtab;
26
27#include "breakpoint.h"
28#include "frame.h"
29#include "ui-out.h"
30#include "inferior.h"
31
32struct thread_info
33{
34 struct thread_info *next;
35 ptid_t ptid; /* "Actual process id";
36 In fact, this may be overloaded with
37 kernel thread id, etc. */
38 int num; /* Convenient handle (GDB thread id) */
39
40 /* Non-zero means the thread is executing. Note: this is different
41 from saying that there is an active target and we are stopped at
42 a breakpoint, for instance. This is a real indicator whether the
43 thread is off and running. */
44 /* This field is internal to thread.c. Never access it directly,
45 use is_executing instead. */
46 int executing_;
47
48 /* Frontend view of the thread state. Note that the RUNNING/STOPPED
49 states are different from EXECUTING. When the thread is stopped
50 internally while handling an internal event, like a software
51 single-step breakpoint, EXECUTING will be false, but running will
52 still be true. As a possible future extension, this could turn
53 into enum { stopped, exited, stepping, finishing, until(ling),
54 running ... } */
55 /* This field is internal to thread.c. Never access it directly,
56 use is_running instead. */
57 int state_;
58
59 /* If this is > 0, then it means there's code out there that relies
60 on this thread being listed. Don't delete it from the lists even
61 if we detect it exiting. */
62 int refcount;
63
64 /* User/external stepping state. */
65
66 /* Step-resume or longjmp-resume breakpoint. */
67 struct breakpoint *step_resume_breakpoint;
68
69 /* Range to single step within.
70
71 If this is nonzero, respond to a single-step signal by continuing
72 to step if the pc is in this range.
73
74 If step_range_start and step_range_end are both 1, it means to
75 step for a single instruction (FIXME: it might clean up
76 wait_for_inferior in a minor way if this were changed to the
77 address of the instruction and that address plus one. But maybe
78 not.). */
79 CORE_ADDR step_range_start; /* Inclusive */
80 CORE_ADDR step_range_end; /* Exclusive */
81
82 /* Stack frame address as of when stepping command was issued.
83 This is how we know when we step into a subroutine call, and how
84 to set the frame for the breakpoint used to step out. */
85 struct frame_id step_frame_id;
86
87 /* Similarly, the frame ID of the underlying stack frame (skipping
88 any inlined frames). */
89 struct frame_id step_stack_frame_id;
90
91 int current_line;
92 struct symtab *current_symtab;
93
94 /* Internal stepping state. */
95
96 /* Record the pc of the thread the last time it stopped. This is
97 maintained by proceed and keep_going, and used in
98 adjust_pc_after_break to distinguish a hardware single-step
99 SIGTRAP from a breakpoint SIGTRAP. */
100 CORE_ADDR prev_pc;
101
102 /* Nonzero if we are presently stepping over a breakpoint.
103
104 If we hit a breakpoint or watchpoint, and then continue, we need
105 to single step the current thread with breakpoints disabled, to
106 avoid hitting the same breakpoint or watchpoint again. And we
107 should step just a single thread and keep other threads stopped,
108 so that other threads don't miss breakpoints while they are
109 removed.
110
111 So, this variable simultaneously means that we need to single
112 step the current thread, keep other threads stopped, and that
113 breakpoints should be removed while we step.
114
115 This variable is set either:
116 - in proceed, when we resume inferior on user's explicit request
117 - in keep_going, if handle_inferior_event decides we need to
118 step over breakpoint.
119
120 The variable is cleared in normal_stop. The proceed calls
121 wait_for_inferior, which calls handle_inferior_event in a loop,
122 and until wait_for_inferior exits, this variable is changed only
123 by keep_going. */
124 int trap_expected;
125
126 /* Should we step over breakpoint next time keep_going is called? */
127 int stepping_over_breakpoint;
128
129 /* Set to TRUE if we should finish single-stepping over a breakpoint
130 after hitting the current step-resume breakpoint. */
131 int step_after_step_resume_breakpoint;
132
133 /* This is set TRUE when a catchpoint of a shared library event
134 triggers. Since we don't wish to leave the inferior in the
135 solib hook when we report the event, we step the inferior
136 back to user code before stopping and reporting the event. */
137 int stepping_through_solib_after_catch;
138
139 /* When stepping_through_solib_after_catch is TRUE, this is a
140 list of the catchpoints that should be reported as triggering
141 when we finally do stop stepping. */
142 bpstat stepping_through_solib_catchpoints;
143
144 /* Per-thread command support. */
145
146 /* Pointer to what is left to do for an execution command after the
147 target stops. Used only in asynchronous mode, by targets that
148 support async execution. Several execution commands use it. */
149 struct continuation *continuations;
150
151 /* Similar to the above, but used when a single execution command
152 requires several resume/stop iterations. Used by the step
153 command. */
154 struct continuation *intermediate_continuations;
155
156 /* Nonzero if the thread is being proceeded for a "finish" command
157 or a similar situation when stop_registers should be saved. */
158 int proceed_to_finish;
159
160 /* Nonzero if the thread is being proceeded for an inferior function
161 call. */
162 int in_infcall;
163
164 enum step_over_calls_kind step_over_calls;
165
166 /* Nonzero if stopped due to a step command. */
167 int stop_step;
168
169 /* If stepping, nonzero means step count is > 1 so don't print frame
170 next time inferior stops if it stops due to stepping. */
171 int step_multi;
172
173 /* This is used to remember when a fork or vfork event was caught by
174 a catchpoint, and thus the event is to be followed at the next
175 resume of the thread, and not immediately. */
176 struct target_waitstatus pending_follow;
177
178 /* Last signal that the inferior received (why it stopped). */
179 enum target_signal stop_signal;
180
181 /* Chain containing status of breakpoint(s) the thread stopped
182 at. */
183 bpstat stop_bpstat;
184
185 /* True if this thread has been explicitly requested to stop. */
186 int stop_requested;
187
188 /* Private data used by the target vector implementation. */
189 struct private_thread_info *private;
190};
191
192/* Create an empty thread list, or empty the existing one. */
193extern void init_thread_list (void);
194
195/* Add a thread to the thread list, print a message
196 that a new thread is found, and return the pointer to
197 the new thread. Caller my use this pointer to
198 initialize the private thread data. */
199extern struct thread_info *add_thread (ptid_t ptid);
200
201/* Same as add_thread, but does not print a message
202 about new thread. */
203extern struct thread_info *add_thread_silent (ptid_t ptid);
204
205/* Same as add_thread, and sets the private info. */
206extern struct thread_info *add_thread_with_info (ptid_t ptid,
207 struct private_thread_info *);
208
209/* Delete an existing thread list entry. */
210extern void delete_thread (ptid_t);
211
212/* Delete an existing thread list entry, and be quiet about it. Used
213 after the process this thread having belonged to having already
214 exited, for example. */
215extern void delete_thread_silent (ptid_t);
216
217/* Delete a step_resume_breakpoint from the thread database. */
218extern void delete_step_resume_breakpoint (struct thread_info *);
219
220/* Translate the integer thread id (GDB's homegrown id, not the system's)
221 into a "pid" (which may be overloaded with extra thread information). */
222extern ptid_t thread_id_to_pid (int);
223
224/* Translate a 'pid' (which may be overloaded with extra thread information)
225 into the integer thread id (GDB's homegrown id, not the system's). */
226extern int pid_to_thread_id (ptid_t ptid);
227
228/* Boolean test for an already-known pid (which may be overloaded with
229 extra thread information). */
230extern int in_thread_list (ptid_t ptid);
231
232/* Boolean test for an already-known thread id (GDB's homegrown id,
233 not the system's). */
234extern int valid_thread_id (int thread);
235
236/* Search function to lookup a thread by 'pid'. */
237extern struct thread_info *find_thread_ptid (ptid_t ptid);
238
239/* Find thread by GDB user-visible thread number. */
240struct thread_info *find_thread_id (int num);
241
242/* Finds the first thread of the inferior given by PID. If PID is -1,
243 returns the first thread in the list. */
244struct thread_info *first_thread_of_process (int pid);
245
246/* Returns any thread of process PID. */
247extern struct thread_info *any_thread_of_process (int pid);
248
249/* Change the ptid of thread OLD_PTID to NEW_PTID. */
250void thread_change_ptid (ptid_t old_ptid, ptid_t new_ptid);
251
252/* Iterator function to call a user-provided callback function
253 once for each known thread. */
254typedef int (*thread_callback_func) (struct thread_info *, void *);
255extern struct thread_info *iterate_over_threads (thread_callback_func, void *);
256
257extern int thread_count (void);
258
259/* Switch from one thread to another. */
260extern void switch_to_thread (ptid_t ptid);
261
262/* Marks thread PTID is running, or stopped.
263 If PIDGET (PTID) is -1, marks all threads. */
264extern void set_running (ptid_t ptid, int running);
265
266/* Marks or clears thread(s) PTID as having been requested to stop.
267 If PTID is MINUS_ONE_PTID, applies to all threads. If
268 ptid_is_pid(PTID) is true, applies to all threads of the process
269 pointed at by PTID. If STOP, then the THREAD_STOP_REQUESTED
270 observer is called with PTID as argument. */
271extern void set_stop_requested (ptid_t ptid, int stop);
272
273/* NOTE: Since the thread state is not a boolean, most times, you do
274 not want to check it with negation. If you really want to check if
275 the thread is stopped,
276
277 use (good):
278
279 if (is_stopped (ptid))
280
281 instead of (bad):
282
283 if (!is_running (ptid))
284
285 The latter also returns true on exited threads, most likelly not
286 what you want. */
287
288/* Reports if in the frontend's perpective, thread PTID is running. */
289extern int is_running (ptid_t ptid);
290
291/* Is this thread listed, but known to have exited? We keep it listed
292 (but not visible) until it's safe to delete. */
293extern int is_exited (ptid_t ptid);
294
295/* In the frontend's perpective, is this thread stopped? */
296extern int is_stopped (ptid_t ptid);
297
298/* In the frontend's perpective is there any thread running? */
299extern int any_running (void);
300
301/* Marks thread PTID as executing, or not. If PIDGET (PTID) is -1,
302 marks all threads.
303
304 Note that this is different from the running state. See the
305 description of state_ and executing_ fields of struct
306 thread_info. */
307extern void set_executing (ptid_t ptid, int executing);
308
309/* Reports if thread PTID is executing. */
310extern int is_executing (ptid_t ptid);
311
312/* Merge the executing property of thread PTID over to its thread
313 state property (frontend running/stopped view).
314
315 "not executing" -> "stopped"
316 "executing" -> "running"
317 "exited" -> "exited"
318
319 If PIDGET (PTID) is -1, go over all threads.
320
321 Notifications are only emitted if the thread state did change. */
322extern void finish_thread_state (ptid_t ptid);
323
324/* Same as FINISH_THREAD_STATE, but with an interface suitable to be
325 registered as a cleanup. PTID_P points to the ptid_t that is
326 passed to FINISH_THREAD_STATE. */
327extern void finish_thread_state_cleanup (void *ptid_p);
328
329/* Commands with a prefix of `thread'. */
330extern struct cmd_list_element *thread_cmd_list;
331
332/* Print notices on thread events (attach, detach, etc.), set with
333 `set print thread-events'. */
334extern int print_thread_events;
335
336extern void print_thread_info (struct ui_out *uiout, int thread,
337 int pid);
338
339extern struct cleanup *make_cleanup_restore_current_thread (void);
340
341/* Returns a pointer into the thread_info corresponding to
342 INFERIOR_PTID. INFERIOR_PTID *must* be in the thread list. */
343extern struct thread_info* inferior_thread (void);
344
345#endif /* GDBTHREAD_H */