3 # Copyright (c) 1990 The Regents of the University of California.
6 # Written and contributed by W. Jolitz 12/90
8 # Redistribution and use in source and binary forms are permitted provided
9 # that: (1) source distributions retain this entire copyright notice and
10 # comment, and (2) distributions including binaries display the following
11 # acknowledgement: ``This product includes software developed by the
12 # University of California, Berkeley and its contributors'' in the
13 # documentation or other materials provided with the distribution and in
14 # all advertising materials mentioning features or use of this software.
15 # Neither the name of the University nor the names of its contributors may
16 # be used to endorse or promote products derived from this software without
17 # specific prior written permission.
18 # THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
19 # WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
20 # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
22 # @(#)MAKEDEV 5.2 (Berkeley) 6/22/90
23 # $FreeBSD: src/etc/MAKEDEV,v 1.243.2.57 2003/02/10 11:35:53 simokawa Exp $
24 # $DragonFly: src/etc/MAKEDEV,v 1.16 2004/12/08 01:26:17 y0netan1 Exp $
26 # Device "make" file. Valid arguments:
27 # all makes all known devices, standard number of units (or close)
28 # std standard devices
29 # jail suitable for a jail(8)
30 # local configuration specific devices
31 # mach-4 mach4&lites+devices for Mach's XFree86 distribution
32 # (see http://www.cs.hut.fi/lites.html for more info on LITES)
35 # ast* ATAPI tape drives
36 # wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape
37 # sa* SCSI Sequential Access Devices
40 # aac* Adaptec FSA RAID controllers
41 # aacd* Adaptec FSA RAID
42 # acd* ATAPI CD-ROM disks
44 # afd* ATAPI floppy disks
46 # cd* SCSI CD-ROM disks
47 # da* SCSI Direct Access Devices
48 # fd* floppy disk drives (3 1/2", 5 1/4")
49 # fla* M-Systems DiskOnChip
50 # idad* Compaq Smart-2 RAID arrays
51 # ips* IBM ServeRAID controller
53 # mcd* Mitsumi CD-ROM disks
54 # md* Memory (or malloc) disk
55 # mlx* Mylex DAC960 RAID controllers
56 # mlxd* Mylex DAC960 RAID disk volumes
57 # pst* Promise SuperTrak RAID disks
58 # scd* Sony CD-ROM disks
62 # vty* virtual console devices for syscons/pcvt/codrv
65 # mse* Logitech and ATI Inport bus mouse
67 # jogdial Sony VAIO Jogdial
68 # sysmouse Mousesystems mouse emulator for syscons
71 # refclock-* serial ports used by xntpd parse refclocks
74 # tty* general purpose serial ports
75 # cua* dialout serial ports
76 # ttyA* Specialix SI/XIO dialin ports ('*' = number of devices)
77 # cuaA* Specialix SI/XIO dialout ports
78 # ttyD* Digiboard - 16 dialin ports
79 # cuaD* Digiboard - 16 dialout ports
80 # ttyE* Stallion EasyIO (stl) dialin ports
81 # cuaE* Stallion EasyIO (stl) dialout ports
82 # ttyF* Stallion Brumby (stli) dialin ports
83 # cuaF* Stallion Brumby (stli) dialout ports
84 # ttyR* Rocketport dialin ports
85 # cuaR* Rocketport dialout ports
87 # stlN Stallion EasyIO board N dialin and dialout
88 # stliN Stallion Brumby board N dialin and dialout
91 # pty* set of 32 master and slave pseudo terminals
92 # vty* virtual terminals using syscons/pcvt/codrv console
96 # ppi* Parallel port i/o
97 # pps* Pulse per second timing interface
98 # pcfclock* Parallel time sync interface
105 # usb* USB bus control device
106 # ucom* USB serial devices
107 # ugen* generic USB device
108 # uhid* Human Interface Device (HID)
112 # urio* Diamond Rio 500
113 # uscanner* USB scanners
115 # SCSI devices (other than CD-ROM, tape and disk):
116 # ch* SCSI Media-Changer (juke box) driver
117 # pt* Processor Type (HP scanner, as one example)
118 # pass* CAM Passthrough device
119 # ses* SES (SCSI Environmental Services) and
120 # SAF-TE (Scsi Accessable Fault-Tolerant Enclosures) device
122 # PC-CARD (previously called PCMCIA) support
123 # card* PC-CARD slots
126 # i4b isdnd call control device
127 # i4bctl debugging control device
128 # i4btrc* trace data interface(s), one per passive card
129 # i4btel* telephony interface(s)
130 # i4bteld* telephony dialout interface(s)
131 # i4brbch* raw b channel access device(s)
133 # Special purpose devices:
134 # acpi ACPI control device
135 # apm Advanced Power Management BIOS
136 # apmctl APM BIOS control device
138 # crypto crypto interface
140 # tw* xten power controller
141 # snd* various sound cards
142 # pcaudio PCM audio driver
143 # socksys iBCS2 socket system driver
144 # vat VAT compatibility audio driver (requires snd*)
145 # gsc Genius GS-4500 hand scanner
147 # tun* Tunneling IP device
148 # tap* Ethernet Tunneling device
149 # snp* tty snoop devices
150 # spigot Video Spigot video acquisition card
151 # ctx* Cortex-I video acquisition card
152 # meteor* Matrox Meteor video acquisition card (pci)
153 # bktr* Bt848 based video acquisition card (pci)
154 # labpc* National Instrument's Lab-PC and LAB-PC+
155 # perfmon CPU performance-monitoring counters
156 # pci PCI configuration-space access from user mode
157 # ipl ipfilter control devices (ipl, ipnat, ipstate, ipauth)
158 # kbd keyboard devices
159 # elan-mmcr AMD Elan support (e.g. mmap MMCR)
160 # agpgart AGP interface
161 # cfs* Coda Distributed Filesystem
162 # nsmb* SMB/CIFS protocol interface
163 # pf PF packet filter
166 if [ -n "$MAKEDEVPATH" ]; then
173 # Usage: die exitcode msg
179 # Convert integer to partition name
184 0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;; 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;;
185 8) p=i;; 9) p=j;; 10) p=k;; 11) p=l;; 12) p=m;; 13) p=n;; 14) p=o;; 15) p=p;;
191 # Convert integer to slice name
203 # Convert disk (type, unit, slice, partition) to minor number
206 echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | ($4 & 7) | ($4 & 8) << 17))
209 # Override mknod(2) to add extra handling to it.
211 for i in `IFS=':'; echo $PATH`; do
212 if [ -x "${i}/mknod" ]; then
220 4) "$mknod" "$@" root:wheel || die 2 "$mknod $@ failed";;
221 5) "$mknod" "$@" || die 2 "$mknod $@ failed";;
222 *) die 2 "bad node: mknod $@";;
226 # Convert tape (ctrl, unit, mode, access) to minor number
229 echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4))
232 # Convert the last character of a tty name to a minor number.
237 a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;;
238 h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;;
239 o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;;
246 # Convert a unit number to a minor number.
249 echo $(((($1 >> 8) << 16) | ($1 % 256)))
252 # For the stallion devices tty[EF]
253 # stallion major letter card iscallout
266 if [ $iscallout -gt 0 ]; then
274 *) die 1 "Invalid stl card number $card";;
277 # make the mem interface for extracting stats & loading microcode.
278 # 0x1000000 + card number
279 mknod staliomem$card c $major 0x0100000$card
281 while [ $port -lt $maxport ]; do
282 minor=$(($minorbase + $card * 1048576 + $port))
283 if [ $port -ge 32 ]; then
284 minor=$(($minor + 65504))
286 unit=$(($card * 64 + $port))
288 mknod ${pref}${letter}$unit c $major $minor $owner
289 mknod ${pref}i${letter}$unit c $major $(($minor + 32)) $owner
290 mknod ${pref}l${letter}$unit c $major $(($minor + 64)) $owner
295 # Raw partition for disks
298 # Compatibility slice for disks
301 # Raw slice for disks
305 disk_umask=037 # allow group operator to read disks
306 tape_umask=017 # allow group operator to read/write tapes
312 sh MAKEDEV std # standard
313 sh MAKEDEV fd0 fd1 # bdev, floppy disk
314 sh MAKEDEV da0 da1 da2 da3 da4 da5 da6 da7 # bdev, SCSI disk
315 sh MAKEDEV da8 da9 da10 da11 da12 da13 da14 # bdev, SCSI disk
316 sh MAKEDEV da15 # bdev, SCSI disk
317 sh MAKEDEV ata # cdev, ATA control
318 sh MAKEDEV ad0 ad1 ad2 ad3 ad4 ad5 ad6 ad7 # bdev, ATA disk
319 sh MAKEDEV ar0 ar1 # bdev, ATA RAID disk
320 sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
321 sh MAKEDEV wd0 wd1 wd2 wd3 # bdev, OLD disk
322 sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs
323 sh MAKEDEV vn0 # bdev, virtual disk
324 sh MAKEDEV cd0 mcd0 scd0 # bdev, cdrom
325 sh MAKEDEV sa0 wt0 # bdev, tape
326 sh MAKEDEV vty12 # cdev, virtual tty
327 sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 # cdev, serial tty
328 sh MAKEDEV pty0 # cdev, pseudo tty
329 sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3 # cdev, serial tty
330 sh MAKEDEV zs0 # big-Alpha serial tty
331 sh MAKEDEV kbd0 kbd1 # cdev, keyboard
332 sh MAKEDEV mse0 psm0 jogdial sysmouse # cdev, mouse
333 sh MAKEDEV pcaudio speaker snd0 # cdev, noise
334 sh MAKEDEV ipsd0 # cdev, ServeRAID disk
335 sh MAKEDEV lpt0 lpt1 lpt2 # cdev, printer
336 sh MAKEDEV ppi0 ppi1 ppi2 # cdev, parallel port
337 sh MAKEDEV iic0 iic1 # cdev, I2C device
338 sh MAKEDEV smb0 smb1 # cdev, SMBus device
339 sh MAKEDEV usb usb0 uhid0 ums0 ulpt0 ugen0 # cdev, USB devices
340 sh MAKEDEV usb1 uhid1 ums1 ulpt1 ugen1 # cdev, USB devices
341 sh MAKEDEV usb2 usb3 usb4 usb5 # cdev, USB devices
342 sh MAKEDEV urio0 uscanner0 umodem0 # cdev, USB devices too
343 sh MAKEDEV bpf0 bpf1 bpf2 bpf3 # cdev, network
344 sh MAKEDEV ipl tun0 tun1 tun2 tun3 # cdev, network
345 sh MAKEDEV tap0 tap1 tap2 tap3 # cdev, network
346 sh MAKEDEV ch0 perfmon tw0 # cdev, miscellaneous
347 sh MAKEDEV acpi # cdev, laptop
348 sh MAKEDEV apm apmctl card0 card1 card2 card3 # cdev, laptop
349 sh MAKEDEV pass4 xpt2 # cdev, CAM
350 sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
351 sh MAKEDEV i4btel0 i4btel1 i4bteld0 i4bteld1 # cdev, ISDN
352 sh MAKEDEV i4brbch0 i4brbch1 # cdev, ISDN
353 sh MAKEDEV agpgart # cdev, AGP
354 sh MAKEDEV nsmb0 # cdev, SMB/CIFS
355 sh MAKEDEV twed0 # 3ware
356 sh MAKEDEV crypto # cdev, crypto
357 sh MAKEDEV fw0 # cdev, firewire
358 sh MAKEDEV dcons # cdev, dcons
362 # a much restricted set of the above, to save precious i-nodes on the
365 sh MAKEDEV std # standard
366 sh MAKEDEV fd0 # bdev, floppy disk
367 sh MAKEDEV da0 # bdev, SCSI disk
368 sh MAKEDEV ad0 # bdev, ATA disk
369 sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
370 sh MAKEDEV wd0 # bdev, OLD disk
371 sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs
372 sh MAKEDEV vn0 # bdev, virtual disk
373 sh MAKEDEV cd0 # bdev, cdrom
374 sh MAKEDEV sa0 # bdev, tape
375 sh MAKEDEV vty2 # cdev, virtual tty
376 sh MAKEDEV cuaa0 # cdev, serial tty
377 sh MAKEDEV pty0 # cdev, pseudo tty
378 sh MAKEDEV ttyd0 # cdev, serial tty
379 sh MAKEDEV zs0 # big-Alpha serial tty
380 sh MAKEDEV kbd0 # cdev, keyboard
381 sh MAKEDEV mse0 psm0 sysmouse # cdev, mouse
382 sh MAKEDEV lpt0 # cdev, printer
383 sh MAKEDEV ppi0 # cdev, parallel port
384 sh MAKEDEV iic0 # cdev, I2C device
385 sh MAKEDEV smb0 # cdev, SMBus device
386 sh MAKEDEV ums0 # cdev, USB devices
387 sh MAKEDEV tun0 # cdev, network
388 sh MAKEDEV tap0 # cdev, network
389 sh MAKEDEV ch0 # cdev, miscellaneous
390 sh MAKEDEV apm apmctl card0 # cdev, laptop
391 sh MAKEDEV pass1 xpt1 # cdev, CAM
392 sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
393 sh MAKEDEV i4btel0 i4bteld0 # cdev, ISDN
394 sh MAKEDEV i4brbch0 # cdev, ISDN
399 mknod console c 0 0; chmod 600 console
400 mknod kmem c 2 1 root:kmem; chmod 640 kmem
401 mknod mem c 2 0 root:kmem; chmod 640 mem
402 mknod null c 2 2; chmod 666 null
403 mknod random c 2 3; chmod 644 random
404 mknod urandom c 2 4; chmod 644 urandom
405 mknod zero c 2 12; chmod 666 zero
406 mknod io c 2 14; chmod 600 io
407 mknod tty c 1 0; chmod 666 tty
408 mknod klog c 7 0; chmod 600 klog
409 mknod stdin c 22 0; chmod 666 stdin
410 mknod stdout c 22 1; chmod 666 stdout
411 mknod stderr c 22 2; chmod 666 stderr
412 mknod pci c 78 0; chmod 644 pci
415 while [ $i -lt 64 ]; do
426 rm mem kmem pci io klog console # for security
427 ln -sf null mem # for libkvm (ab)users
428 ln -sf null kmem # --//--
437 mknod timezone c 26 0
440 # Create device files for new Archive/Wangtek QIC-02 tape driver (vak)
443 u=`expr $i : '..\(.*\)'`
444 if [ -z "${u}" ]; then u=0; fi
445 # default density, 512b blocks
446 mknod rwt${u} c 10 $(( 0 + $u)) root:operator
447 mknod nrwt${u} c 10 $(( 4 + $u)) root:operator
448 # default density, 1024b blocks
449 # mknod rWt${u} c 10 $((64 + $u)) root:operator
450 # mknod nrWt${u} c 10 $((68 + $u)) root:operator
451 mknod rwt${u}b c 10 $((16 + $u)) root:operator # 60 megabytes
452 mknod nrwt${u}b c 10 $((20 + $u)) root:operator
453 mknod rwt${u}c c 10 $((24 + $u)) root:operator # 120 megabytes
454 mknod nrwt${u}c c 10 $((28 + $u)) root:operator
455 mknod rwt${u}d c 10 $((32 + $u)) root:operator # 150 megabytes
456 mknod nrwt${u}d c 10 $((36 + $u)) root:operator
457 # mknod rwt${u}e c 10 $((40 + $u)) root:operator # 300 megabytes?
458 # mknod nrwt${u}e c 10 $((44 + $u)) root:operator
459 # mknod rwt${u}f c 10 $((48 + $u)) root:operator # 600 megabytes?
460 # mknod nrwt${u}f c 10 $((52 + $u)) root:operator
465 aacd*s*|ad*s*|ar*s*|afd*s*|amrd*s*|da*s*|fla*s*|idad*s*|ipsd*s*|md*s*|mlxd*s*|pst*s*|twed*s*|vn*s*|wd*s*|wfd*s*)
468 aacd*s*) name=aacd; chr=151;;
469 ad*s*) name=ad; chr=116;;
470 ar*s*) name=ar; chr=157;;
471 afd*s*) name=afd; chr=118;;
472 amrd*s*) name=amrd; chr=133;;
473 da*s*) name=da; chr=13;;
474 fla*s*) name=fla; chr=102;;
475 idad*s*) name=idad; chr=109;;
476 ipsd*s*) name=ipsd; chr=176;;
477 md*s*) name=md; chr=95;;
478 mlxd*s*) name=mlxd; chr=131;;
479 pst*s*) name=pst; chr=168;;
480 twed*s*) name=twed; chr=147;;
481 vn*s*) name=vn; chr=43;;
482 wd*s*) name=wd; chr=3;;
483 wfd*s*) name=wfd; chr=87;;
486 aacd*s*|amrd*s*|idad*s*|ipsd*s*|mlxd*s*|twed*s*)
487 unit=`expr $i : '....\([0-9]*\)s'`
488 slice=`expr $i : '....[0-9]*s\([0-9]*\)'`
489 part=`expr $i : '....[0-9]*s[0-9]*\(.*\)'`
491 afd*s*|fla*s*|pst*s*|wfd*s*)
492 unit=`expr $i : '...\([0-9]*\)s'`
493 slice=`expr $i : '...[0-9]*s\([0-9]*\)'`
494 part=`expr $i : '...[0-9]*s[0-9]*\(.*\)'`
497 unit=`expr $i : '..\([0-9]*\)s'`
498 slice=`expr $i : '..[0-9]*s\([0-9]*\)'`
499 part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'`
503 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
508 slicename=`dkitos $slice`
509 minor=`dkminor 0 $unit $slice $dkrawpart`
510 mknod $name$unit$slicename c $chr $minor root:operator
511 rm -f r$name$unit$slicename
515 0) slice=$oldslice ;;
517 for part in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
519 minor=`dkminor 0 $unit $slice $part`
520 partname=`dkitop $part`
521 mknod $name$unit$slicename$partname \
522 c $chr $minor root:operator
523 rm -f r$name$unit$slicename$partname
529 echo bad partition for disk in: $i
534 echo bad slice for disk in: $i
539 echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)"
547 unit=`expr $i : '..\(.*\)'`
551 mknod ${name}${unit} c $chr $(($unit * 64)) root:operator
552 rm -f r${name}${unit}
553 # Fake BSD partitions
554 for i in a b c d e f g h
556 ln -f ${name}${unit} ${name}${unit}$i
557 rm -f r${name}${unit} r${name}${unit}$i
559 # User-readable and programmer-readable name sets
561 mknod ${name}${unit}.1720 c $chr $(($unit * 64 + 1)) \
563 rm -f r${name}${unit}.1720
564 # ln -f ${name}${unit}.1720 ${name}${unit}135hs21
565 # rm -f r${name}${unit}135hs21
567 mknod ${name}${unit}.1480 c $chr $(($unit * 64 + 2)) \
569 rm -f r${name}${unit}.1480
570 # ln -f ${name}${unit}.1480 ${name}${unit}135hs18
571 # rm -f r${name}${unit}135hs18
572 # ln -f ${name}${unit}.1480 ${name}${unit}96hs18
573 # rm -f r${name}${unit}96hs18
575 mknod ${name}${unit}.1440 c $chr $(($unit * 64 + 3)) \
577 rm -f r${name}${unit}.1440
578 # ln -f ${name}${unit}.1440 ${name}${unit}135
579 # rm -f r${name}${unit}135
580 # ln -f ${name}${unit}.1440 ${name}${unit}135ds18
581 # rm -f r${name}${unit}135ds18
582 # ln -f ${name}${unit}.1440 ${name}${unit}96ds18
583 # rm -f r${name}${unit}96ds18
585 mknod ${name}${unit}.1200 c $chr $(($unit * 64 + 4)) \
587 rm -f r${name}${unit}.1200
588 # ln -f ${name}${unit}.1200 ${name}${unit}96
589 # rm -f r${name}${unit}96
590 # ln -f ${name}${unit}.1200 ${name}${unit}96ds15
591 # rm -f r${name}${unit}96ds15
592 # ln -f ${name}${unit}.1200 ${name}${unit}135ds15
593 # rm -f r${name}${unit}135ds15
595 mknod ${name}${unit}.820 c $chr $(($unit * 64 + 5)) \
597 rm -f r${name}${unit}.820
598 # ln -f ${name}${unit}.820 ${name}${unit}96hs10
599 # rm -f r${name}${unit}96hs10
600 # ln -f ${name}${unit}.820 ${name}${unit}135hs10
601 # rm -f r${name}${unit}135hs10
603 mknod ${name}${unit}.800 c $chr $(($unit * 64 + 6)) \
605 rm -f r${name}${unit}.800
606 # ln -f ${name}${unit}.800 ${name}${unit}96ds10
607 # rm -f r${name}${unit}96ds10
608 # ln -f ${name}${unit}.800 ${name}${unit}135ds10
609 # rm -f r${name}${unit}135ds10
611 mknod ${name}${unit}.720 c $chr $(($unit * 64 + 7)) \
613 rm -f r${name}${unit}.720
614 # ln -f ${name}${unit}.720 ${name}${unit}96ds9
615 # rm -f r${name}${unit}96ds9
616 # ln -f ${name}${unit}.720 ${name}${unit}135ds9
617 # rm -f r${name}${unit}135ds9
619 mknod ${name}${unit}.360 c $chr $(($unit * 64 + 8)) \
621 rm -f r${name}${unit}.360
622 # ln -f ${name}${unit}.360 ${name}${unit}48
623 # rm -f r${name}${unit}48
624 # ln -f ${name}${unit}.360 ${name}${unit}48ds9
625 # rm -f r${name}${unit}48ds9
627 mknod ${name}${unit}.640 c $chr $(($unit * 64 + 9)) \
629 rm -f r${name}${unit}.640
630 # ln -f ${name}${unit}.640 ${name}${unit}96ds8
631 # rm -f r${name}${unit}96ds8
632 # ln -f ${name}${unit}.640 ${name}${unit}135ds8
633 # rm -f r${name}${unit}135ds8
635 mknod ${name}${unit}.1232 c $chr $(($unit * 64 + 10)) \
637 rm -f r${name}${unit}.1232
638 # ln -f ${name}${unit}.1232 ${name}${unit}96ds8
639 # rm -f r${name}${unit}96ds8
640 # ln -f ${name}${unit}.1232 ${name}${unit}135ds8
641 # rm -f r${name}${unit}135ds8
644 echo bad unit for disk in: $i
650 aacd*|ad*|ar*|afd*|amrd*|da*|fla*|idad*|ipsd*|md*|mlxd*|pst*|twed*|vn*|wd*|wfd*)
653 aacd*) name=aacd; chr=151;;
654 ad*) name=ad; chr=116;;
655 ar*) name=ar; chr=157;;
656 afd*) name=afd; chr=118;;
657 amrd*) name=amrd; chr=133;;
658 da*) name=da; chr=13;;
659 fla*) name=fla; chr=102;;
660 idad*) name=idad; chr=109;;
661 ipsd*) name=ipsd; chr=176;;
662 md*) name=md; chr=95;;
663 mlxd*) name=mlxd; chr=131;;
664 pst*) name=pst; chr=168;;
665 twed*) name=twed; chr=147;;
666 vn*) name=vn; chr=43;;
667 wd*) name=wd; chr=3;;
668 wfd*) name=wfd; chr=87;;
671 aacd*|amrd*|idad*|ipsd*|mlxd*|twed*)
672 unit=`expr $i : '....\(.*\)'`
675 unit=`expr $i : '...\(.*\)'`
678 unit=`expr $i : '..\(.*\)'`
682 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
683 for slicepartname in s0h s1h s2 s3 s4
685 sh MAKEDEV $name$unit$slicepartname
689 echo bad unit for disk in: $i
699 unit=`expr $i : '...\(.*\)'`
701 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
702 for part in 0 1 2 3 4 5 6 7
704 minor=`dkminor 0 $unit 0 $part`
705 partname=`dkitop $part`
706 mknod $name$unit$partname c $chr $minor root:operator
707 rm -f r$name$unit$partname
711 echo bad unit for disk in: $i
717 # SCSI processor type driver
721 unit=`expr $i : 'pt\([0-9][0-9]*\)'`
722 if [ -z "${unit}" ]; then
725 unit=$(($unit + 1 - 1))
726 mknod ${name}${unit} c $chr `unit2minor $unit`
729 # SCSI SES/SAF-TE type driver
733 unit=`expr $i : 'ses\([0-9][0-9]*\)'`
734 if [ -z "${unit}" ]; then
737 unit=$(($unit + 1 - 1))
738 mknod ${name}${unit} c $chr `unit2minor $unit`
740 # SCSI target mode sample driver
744 unit=`expr $i : 'targ\([0-9][0-9]*\)'`
745 if [ -z "${unit}" ]; then
748 unit=$(($unit + 1 - 1))
749 mknod ${name}${unit} c $chr `unit2minor $unit`
750 mknod ${name}.ctl c $chr 0xffff00ff
753 # CAM transport layer device
755 # This major number is temporary
758 units=`expr $i : 'xpt\(.*\)'`
759 if [ -z "${units}" ]; then
763 while [ $i -lt $units ]; do
766 mknod $dname c $chr `unit2minor $i` root:operator
771 # CAM passthrough device
773 # This major number is temporary
776 units=`expr $i : 'pass\(.*\)'`
777 if [ -z "${units}" ]; then
781 while [ $i -lt $units ]; do
784 mknod $dname c $chr `unit2minor $i` root:operator
789 class=`expr $i : 'pty\(.*\)'`
792 1) offset=32 name=q;;
793 2) offset=64 name=r;;
794 3) offset=96 name=s;;
795 # Note that xterm (at least) only look at p-s.
796 4) offset=128 name=P;;
797 5) offset=160 name=Q;;
798 6) offset=192 name=R;;
799 7) offset=224 name=S;;
800 # This still leaves [tuTU].
801 *) echo bad unit for pty in: $i;;
807 while [ $i -lt 32 ]; do
808 # This was an awk substr() before.
809 c=$(echo 0123456789abcdefghijklmnopqrstuv |
810 dd bs=1 skip=$i count=1 2>/dev/null)
811 mknod tty$name$c c 5 $(($offset + $i))
812 mknod pty$name$c c 6 $(($offset + $i))
822 unit=`expr $i : '..\(.*\)'`
826 [0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9])
827 mknod sa${unit}.ctl c $chr `saminor 1 ${unit} 0 0`
828 ln -f sa${unit}.ctl rsa${unit}.ctl
831 mknod sa${unit}.${m} c $chr \
832 `saminor 0 ${unit} ${m} 0` root:operator
833 ln -f sa${unit}.${m} rsa${unit}.${m}
834 mknod nsa${unit}.${m} c $chr \
835 `saminor 0 ${unit} ${m} 1` root:operator
836 ln -f nsa${unit}.${m} nrsa${unit}.${m}
837 mknod esa${unit}.${m} c $chr \
838 `saminor 0 ${unit} ${m} 2` root:operator
839 ln -f esa${unit}.${m} ersa${unit}.${m}
841 ln -f sa${unit}.0 sa${unit}
842 ln -f sa${unit}.0 rsa${unit}.0
843 ln -f sa${unit}.0 rsa${unit}
844 ln -f nsa${unit}.0 nsa${unit}
845 ln -f nsa${unit}.0 nrsa${unit}.0
846 ln -f nsa${unit}.0 nrsa${unit}
847 ln -f esa${unit}.0 esa${unit}
848 ln -f esa${unit}.0 ersa${unit}.0
849 ln -f esa${unit}.0 ersa${unit}
852 echo bad unit for tape in: $i
860 unit=`expr $i : '..\(.*\)'`
862 ch*) name=ch; chr=17;;
866 mknod ${name}${unit} c $chr $unit root:operator
869 echo bad unit for media changer in: $i
876 mknod ata c 159 0 root:operator
880 unit=`expr $i : '...\(.*\)'`
884 mknod ast${unit} c $chr $(($unit * 8 + 0)) root:operator
886 mknod nast${unit} c $chr $(($unit * 8 + 1)) root:operator
887 chmod 640 nast${unit}
890 echo bad unit for tape in: $i
898 units=`expr $i : '...\(.*\)t'`;
899 tracks=`expr $i : '.*t\(.*\)'`;
902 if [ -z "${units}" ]; then
905 if [ -z "${tracks}" ]; then
908 if [ "${units}" -le 31 -a "${tracks}" -le 169 ]; then
910 while [ $i -le $units ]; do
914 while [ $j -le ${tracks} ]; do
915 mknod ${dname}t$j c $chr \
916 $((($i * 8) + (65536 * $j))) \
923 echo "$i is invalid -- can't have more than 32 cd devices or 169 tracks"
931 acd*) units=`expr $i : '...\(.*\)'`; name=acd; chr=117;;
932 cd*) units=`expr $i : '..\(.*\)'`; name=cd; chr=15;;
933 mcd*) units=`expr $i : '...\(.*\)'`; name=mcd; chr=29;;
934 scd*) units=`expr $i : '...\(.*\)'`; name=scd; chr=45;;
936 if [ -z "${units}" ]; then
939 if [ "${units}" -le 31 ]; then
941 while [ $i -le $units ]; do
944 mknod ${dname}a c $chr $(($i * 8)) root:operator
947 ln -f ${dname}a ${dname}c;;
949 mknod ${dname}c c $chr $(($i * 8 + 2)) root:operator;;
956 echo "$i is invalid -- can't have more than 32 cd devices"
963 unit=`expr $i : '...\(.*\)'`
967 mknod wcd${unit}a c $chr $(($unit * 8 + 0)) root:operator
968 mknod wcd${unit}c c $chr $(($unit * 8 + 2)) root:operator
969 ln -f wcd${unit}a rwcd${unit}a
970 ln -f wcd${unit}c rwcd${unit}c
971 chmod 640 wcd${unit}[a-h] rwcd${unit}[a-h]
974 echo bad unit for disk in: $i
982 unit=`expr $i : '...\(.*\)'`
986 mknod rwst${unit} c $chr $(($unit * 8 + 0)) root:operator
987 chmod 640 rwst${unit}
994 unit=`expr $i : 'iic\(.*\)'`
995 mknod iic$unit c 105 `unit2minor $unit`
999 unit=`expr $i : 'smb\(.*\)'`
1000 mknod smb$unit c 106 `unit2minor $unit`
1004 unit=`expr $i : 'pcfclock\(.*\)'`
1005 mknod pcfclock$unit c 140 `unit2minor $unit`
1009 unit=`expr $i : 'ppi\(.*\)'`
1010 mknod ppi$unit c 82 `unit2minor $unit`
1014 unit=`expr $i : 'pps\(.*\)'`
1015 mknod pps$unit c 89 `unit2minor $unit`
1019 mknod usb c 108 255 root:operator
1025 unit=`expr $i : 'usb\(.*\)'`
1026 mknod usb$unit c 108 `unit2minor $unit` root:operator
1032 unit=`expr $i : 'ucom\(.*\)'`
1033 minor=$(($unit + 128))
1034 minor=`unit2minor $(($unit + 128))`
1035 mknod ucom$unit c 138 $minor uucp:dialer
1041 unit=`expr $i : 'uhid\(.*\)'`
1042 mknod uhid$unit c 122 `unit2minor $unit` root:operator
1048 unit=`expr $i : 'ums\(.*\)'`
1049 mknod ums$unit c 111 `unit2minor $unit` root:operator
1054 unit=`expr $i : 'ulpt\(.*\)'`
1055 minor=`unit2minor $unit`
1056 mknod ulpt$unit c 113 $minor
1057 minor=`unit2minor $(($unit + 64))`
1058 mknod unlpt$unit c 113 $minor # and the 'no prime' version
1063 unit=`expr $i : 'ugen\([0-9][0-9]*\)'`
1064 endpoint=`expr $i : 'ugen.*\.\([0-9][0-9]*\)'`
1065 if [ -z "${unit}" ]; then
1066 echo $i - Invalid unit number
1068 if [ -z "${endpoint}" ]; then # ugen0 & ugen0.1 - ugen0.15
1069 mknod ugen$unit c 114 \
1070 `unit2minor $(($unit * 16))` root:operator
1072 while [ $i -lt 16 ]; do
1073 mknod ugen$unit.$i c 114 \
1074 `unit2minor $(($unit * 16 + $i))` root:operator
1078 minor=`unit2minor $(($unit * 16 + $endpoint))`
1079 mknod ugen$unit.$endpoint c 114 $minor root:operator
1086 unit=`expr $i : 'urio\(.*\)'`
1087 mknod urio$unit c 143 `unit2minor $unit` root:operator
1093 unit=`expr $i : 'uscanner\(.*\)'`
1094 mknod uscanner$unit c 156 `unit2minor $unit` root:operator
1100 unit=`expr $i : 'umodem\(.*\)'`
1101 mknod umodem$unit c 124 `unit2minor $unit` uucp:dialer
1106 unit=`expr $i : 'lpt\(.*\)'`
1107 mknod lpt$unit c 16 `unit2minor $unit`
1108 mknod lpctl$unit c 16 `unit2minor $(($unit + 128))`
1111 # Use this to create virtual consoles for syscons, pcvt or codrv
1113 # use as MAKEDEV vtyNN to create NN entries
1116 units=`expr $i : 'vty\(.*\)'`
1118 while [ $i -lt $units ]; do
1119 mknod ttyv$(printf %01x $i) c $chr `unit2minor $i`
1122 ln -fs ttyv0 vga # XXX X still needs this pccons relic
1126 units=`expr $i : 'nmdm\(.*\)'`
1129 while [ $i -lt $units ]; do
1130 minor=`unit2minor $i`
1131 minor=$(($minor + $minor))
1132 mknod nmdm${i}A c $chr $minor
1133 mknod nmdm${i}B c $chr $(($minor + 1))
1139 nbpf=`expr $i : 'bpf\(.*\)$'`
1141 while [ $unit -le $nbpf ]; do
1142 mknod bpf$unit c 23 `unit2minor $unit`
1148 mknod speaker c 26 0
1153 unit_low=`expr $i : 'cua.*\(.\)$'`
1160 unit_high=`expr $i : 'cuaa\(.\).$'`
1161 m_high=`ttyminor $unit_high`
1164 unit=$unit_high$unit_low
1165 m=$(($m_high << 16 | `ttyminor $unit_low`))
1166 mknod cuaa$unit c 28 $(($m | 128)) uucp:dialer
1167 mknod cuaia$unit c 28 $(($m | 32 | 128)) uucp:dialer
1168 mknod cuala$unit c 28 $(($m | 64 | 128)) uucp:dialer
1173 mknod crypto c 70 0 root:operator
1177 mknod pf c 73 0 root:operator
1181 unit=`expr $i : 'fw\(.\)$'`
1184 minor=$(($unit << 16 | $sub))
1185 mknod fw$unit.$sub c 127 $minor root:operator
1186 chmod 660 fw$unit.$sub
1187 mknod fwmem$unit.$sub c 127 $((1<<24 | $minor)) root:operator
1188 chmod 660 fwmem$unit.$sub
1190 ln -sf fw$unit.0 fw$unit
1191 ln -sf fwmem$unit.0 fwmem$unit
1195 mknod dcons c 184 0 root:wheel
1199 tty?|tty0?|ttyd?|ttyd??)
1200 unit_low=`expr $i : 'tty.*\(.\)$'`
1207 unit_high=`expr $i : 'ttyd\(.\).$'`
1208 m_high=`ttyminor $unit_high`
1211 unit=$unit_high$unit_low
1212 m=$(($m_high << 16 | `ttyminor $unit_low`))
1213 mknod ttyd$unit c 28 $m
1214 mknod ttyid$unit c 28 $(($m | 32))
1215 mknod ttyld$unit c 28 $(($m | 64))
1220 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
1221 g h i j k l m n o p q r s t u v"
1223 card=`expr $i : 'cua.*\(.\)$'`
1224 for unit in $portlist
1226 minor=`ttyminor $unit`
1227 minor=$(($card * 65536 + $minor))
1229 mknod cuac$name c $major $(($minor + 128)) uucp:dialer
1230 mknod cuaic$name c $major $(($minor + 32 + 128)) uucp:dialer
1231 mknod cualc$name c $major $(($minor + 64 + 128)) uucp:dialer
1237 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
1238 g h i j k l m n o p q r s t u v"
1240 card=`expr $i : 'tty.*\(.\)$'`
1241 for unit in $portlist
1243 minor=`ttyminor $unit`
1244 minor=$(($card * 65536 + $minor))
1246 mknod ttyc$name c $major $minor
1247 mknod ttyic$name c $major $(($minor + 32))
1248 mknod ttylc$name c $major $(($minor + 64))
1252 # RISCom8 'rc' driver entries
1256 unit=`expr $i : 'cua.*\(.\)$'`
1258 mknod cuam$unit c 63 $(($m + 128)) uucp:dialer
1263 unit=`expr $i : 'tty.*\(.\)$'`
1265 mknod ttym$unit c 63 $m
1269 # Note: these are 'base 1' to match the numbers on the panels, and to match
1270 # the manual that comes with the system.
1273 nports=`expr $i : 'ttyA\(.*\)$'`
1275 while [ $port -le $nports ]; do
1276 minor=$(($port - 1))
1277 name=$(printf %02d $port)
1278 mknod ttyA$name c $major $minor
1279 mknod ttyiA$name c $major $(($minor + 65536))
1280 mknod ttylA$name c $major $(($minor + 131072))
1283 # For the user-mode control program, 'sicontrol'
1284 mknod si_control c 68 262144
1290 nports=`expr $i : 'cuaA\(.*\)$'`
1292 while [ $port -le $nports ]; do
1293 minor=$(($port - 1))
1294 name=$(printf %02d $port)
1295 mknod cuaA$name c $major $(($minor + 128)) uucp:dialer
1296 mknod cuaiA$name c $major $(($minor + 128 + 65536)) \
1298 mknod cualA$name c $major $(($minor + 128 + 131072)) \
1305 # Alpha AS8[24]00 (TurboLaser) console.
1307 unit=`expr $i : 'zs.*\(.\)$'`
1309 mknod zs$unit c 135 $m
1312 # Digiboard PC/?? 16 port card.
1313 # The current scheme of minor numbering is:
1315 # unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5}
1317 # CARD bitfield in future versions may be extended to 3 bits.
1322 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1324 card=`expr $i : 'tty.*\(.\)$'`
1325 for unit in $portlist
1327 minor=`ttyminor $unit`
1328 minor=$(($card * 65536 + $minor))
1330 mknod ttyD$name c $major $minor
1331 mknod ttyiD$name c $major $(($minor + 32))
1332 mknod ttylD$name c $major $(($minor + 64))
1338 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1340 card=`expr $i : 'cua.*\(.\)$'`
1341 for unit in $portlist
1343 minor=`ttyminor $unit`
1344 minor=$(($card * 65536 + $minor))
1346 mknod cuaD$name c $major $(($minor + 128)) uucp:dialer
1347 mknod cuaiD$name c $major $(($minor + 32 + 128)) uucp:dialer
1348 mknod cualD$name c $major $(($minor + 64 + 128)) uucp:dialer
1353 # Stallion multi serial cards (stl and stli drivers)
1355 # These drivers reserve 64 minor devices per board, even if the board
1356 # supports only 4 devices. We default to creating only 8 of the 64 devices
1357 # to keep /dev from getting too large (which => slow). The last part of the
1358 # arg is the board number to create ports for. So:
1359 # ttyE0 will create 8 dialin ports ttyE0-ttyE7, plus ttyiE* and ttylE*
1360 # cuaE0 will create 8 dialout ports cuaE0-cuaE7, plus cuaiE* and cualE*
1361 # ttyE1 will create 8 dialin ports ttyE64-ttyE71, plus ttyiE* and ttylE*
1363 # If you have EasyConnect 8/32 or 8/64 cards, you will need to change the
1364 # definition of "maxport" below to get nodes for the full 32 or 64
1367 # Note that the mapping of minor device numbers (with the hole between
1368 # 32-64k) is a bit odd to keep compatibility with ttyd? for
1369 # lock/initial devices.
1370 # Minor device field for the ports is
1371 # card{3} unused{4} unit-msb{1} unused{8} callout{1} lock{1} init{1} unit-lsbs{5}
1372 # for the mem device is
1374 # (For stl, there is only 1 mem device per system; for stli, one per board)
1377 stallion 72 E `expr $i : 'tty.*\(.\)$'` 0
1380 stallion 72 E `expr $i : 'cua.*\(.\)$'` 1
1383 card=`expr $i : 'stl\(.\)$'`
1384 stallion 72 E $card 0
1385 stallion 72 E $card 1
1389 stallion 75 F `expr $i : 'tty.*\(.\)$'` 0
1392 stallion 75 F `expr $i : 'cua.*\(.\)$'` 1
1395 card=`expr $i : 'stl\(.\)$'`
1396 stallion 75 F $card 0
1397 stallion 75 F $card 1
1401 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1402 modulelist="a b c d"
1404 card=`expr $i : 'tty.*\(.\)$'`
1405 for unit in $modulelist
1407 moduleminor=`ttyminor $unit`
1408 moduleminor=$(($moduleminor % 10 * 16))
1411 for unit in $portlist
1413 minor=`ttyminor $unit`
1414 minor=$(($card * 65536 + $minor + $moduleminor))
1415 name=$card$modulename$unit
1417 mknod ttyM$name c $major $minor
1418 mknod ttyiM$name c $major $(($minor + 64))
1419 mknod ttylM$name c $major $(($minor + 128))
1426 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1427 modulelist="a b c d"
1429 card=`expr $i : 'cua.*\(.\)$'`
1430 for unit in $modulelist
1432 moduleminor=`ttyminor $unit`
1433 moduleminor=$(($moduleminor % 10 * 16))
1436 for unit in $portlist
1438 minor=`ttyminor $unit`
1439 minor=$(($card * 65536 + $minor + $moduleminor))
1440 name=$card$modulename$unit
1442 mknod cuaM$name c $major $(($minor + 262144)) \
1444 mknod cuaiM$name c $major $(($minor + 64 + 262144)) \
1446 mknod cualM$name c $major $(($minor + 128 + 262144)) \
1456 MINOR=$(($BOARD * 65536))
1458 dmesg | while read first rest; do
1466 rm -f ttyR* ttyiR* ttylR*
1467 for i in $controllers; do
1469 dmesg | while read first bar ports rest; do
1477 echo -n "Creating $ndevices devices for $i: "
1479 while [ $dev -lt $ndevices ]; do
1480 mknod ttyR$Rnum c $major $MINOR
1481 mknod ttyiR$Rnum c $major $(($MINOR + 32))
1482 mknod ttylR$Rnum c $major $(($MINOR + 64))
1484 MINOR=$(($MINOR + 1))
1487 BOARD=$(($BOARD + 1))
1488 MINOR=$(($BOARD * 65536))
1496 MINOR=$(($BOARD * 65536))
1498 dmesg | while read first rest; do
1506 rm -f cuaR* cuaiR* cualR*
1507 for i in $controllers; do
1509 dmesg | while read first bar ports rest; do
1517 echo -n "Creating $ndevices devices for $i: "
1519 while [ $dev -lt $ndevices ]; do
1520 mknod cuaR$Rnum c $major $(($MINOR + 128)) uucp:dialer
1521 mknod cuaiR$Rnum c $major $(($MINOR + 128 + 32)) \
1523 mknod cualR$Rnum c $major $(($MINOR + 128 + 64)) \
1526 MINOR=$(($MINOR + 1))
1529 BOARD=$(($BOARD + 1))
1530 MINOR=$(($BOARD * 65536))
1536 unit=`expr $i : 'mse\(.*\)'`
1538 # non-blocking for X11
1539 mknod mse$unit c $chr `unit2minor $(($unit * 2 + 1))`
1543 unit=`expr $i : 'psm\(.*\)'`
1545 # non-blocking for X11
1546 mknod psm$unit c $chr `unit2minor $(($unit * 2 + 1))`
1550 name=`expr $i : 'mouse\(.*\)'`
1551 if [ ! -c $name ]; then
1552 $0 $name # make the appropriate device
1558 mknod pcaudio c 24 0
1559 mknod pcaudioctl c 24 128
1563 mknod socksys c 41 0
1566 chmod 666 socksys nfsd spx
1571 # changes from Linux voxware
1572 # minor Linux FreeBSD
1573 # 8 sequencer2 (aka music0) music0
1574 # 17 patmgr0 sequencer1
1575 # 33 patmgr1 sequencer2
1578 unit=`expr $i : 'snd\(.*\)'`
1581 # XXX write this less verbosely, like std
1582 snd_security_hole=0 # XXX
1583 umask $snd_security_hole
1585 ln -fs mixer$unit mixer
1586 ln -fs sequencer$unit sequencer
1588 ln -fs audio$unit audio
1589 ln -fs dspW$unit dspW
1590 ln -fs music$unit music
1592 ln -fs dsp$unit.0 dsp$unit
1593 ln -fs audio$unit.0 audio$unit
1594 ln -fs dspW$unit.0 dspW$unit
1596 mknod mixer$unit c $chr `unit2minor $(($unit * 16 + 0))`
1597 mknod sequencer$unit c $chr `unit2minor $(($unit * 16 + 1))`
1598 mknod midi$unit c $chr `unit2minor $(($unit * 16 + 2))`
1602 minor=$(($chn * 65536 + $unit * 16))
1603 mknod dsp$unit.$chn c $chr $(($minor + 3))
1604 mknod audio$unit.$chn c $chr $(($minor + 4))
1605 mknod dspW$unit.$chn c $chr $(($minor + 5))
1608 mknod sndstat c $chr 6
1609 # minor number 7 is unused
1610 mknod music$unit c $chr `unit2minor $(($unit * 16 + 8))`
1611 mknod pss$unit c $chr `unit2minor $(($unit * 16 + 9))`
1612 # minor numbers 10-15 are unused
1617 mknod vatio c 25 128
1622 unit=`expr $i : 'gsc\(.*\)'`
1623 mknod gsc${unit} c 47 `unit2minor $unit`
1624 mknod gsc${unit}p c 47 `unit2minor $(($unit + 8))`
1625 mknod gsc${unit}d c 47 `unit2minor $(($unit + 32))`
1626 mknod gsc${unit}pd c 47 `unit2minor $(($unit + 40))`
1627 chmod 666 gsc${unit}*
1631 mknod acpi c 152 0 root:operator
1635 mknod apm c 39 0 root:operator
1640 mknod apmctl c 39 8 root:operator
1645 unit=`expr $i : 'card\(.*\)'`
1647 mknod card$unit c $chr `unit2minor $unit`
1653 *0) unit=0;; *1) unit=1;; *2) unit=2;; *3) unit=3;;
1654 *4) unit=4;; *5) unit=5;; *6) unit=6;; *7) unit=7;;
1655 *8) unit=8;; *9) unit=9;; *a) unit=10;; *b) unit=11;;
1656 *c) unit=12;; *d) unit=13;; *e) unit=14;; *f) unit=15;;
1659 ttyy?) unit=$(($unit + 16));;
1660 ttyz?) unit=$(($unit + 32));;
1666 mknod cronyx c 42 63
1670 mknod joy0 c 51 0 root:operator
1671 mknod joy1 c 51 1 root:operator
1681 unit=`expr $i : 'ctx\(.*\)'`
1682 mknod ctx$unit c 40 `unit2minor $unit`
1687 unit=`expr $i : 'meteor\(.*\)'`
1688 mknod meteor$unit c 67 `unit2minor $unit`
1689 chmod 444 meteor$unit
1693 unit=`expr $i : 'bktr\(.*\)'`
1694 mknod bktr$unit c 92 `unit2minor $unit`
1695 mknod tuner$unit c 92 `unit2minor $((16 + $unit))`
1696 mknod vbi$unit c 92 `unit2minor $((32 + $unit))`
1697 chmod 444 bktr$unit tuner$unit vbi$unit
1701 ntun=`expr $i : 'tun\(.*\)$'`
1703 while [ $unit -le $ntun ]; do
1704 mknod tun$unit c 52 `unit2minor $unit`
1710 ntap=`expr $i : 'tap\(.*\)$'`
1712 while [ $unit -le $ntap ]; do
1713 mknod tap$unit c 149 `unit2minor $unit` root:network
1719 mknod sysmouse c 12 128
1720 mknod consolectl c 12 255
1724 mknod jogdial c 160 0
1728 unit=`expr $i : 'snp\(.*\)'`
1729 mknod snp$unit c 53 `unit2minor $unit`
1732 # dufault@hda.com: If I do much more work on other A-D boards
1733 # then eventually we'll have a "ad" and "dio" interface and some of these
1734 # "labpcaio" ones will be gone.
1735 # labpcaio: D-A and A-D.
1736 # labpcdio: Digital in and Digital out.
1743 unit=`expr $i : 'labpcaio\(.*\)'`
1744 all="0 1 2 3 4 5 6 7"
1749 unit=`expr $i : 'labpcdio\(.*\)'`
1754 die 3 "Don't know LabPC type $i"
1757 if [ -z "${unit}" ]; then
1762 mknod $name$unit c 66 $(($offset + $unit))
1767 mknod $name$i c 66 $(($offset + $i))
1771 echo "No such LabPC unit: $unit"
1778 mknod perfmon c 2 32 root:kmem
1785 mknod ipstate c 79 2
1790 mknod elan-mmcr c 100 0 # XXX local major
1795 unit=`expr $i : 'kbd\(.*\)'`
1797 mknod kbd$unit c $chr `unit2minor $unit`
1809 unit=`expr $i : 'i4brbch\(.*\)'`
1810 mknod i4brbch$unit c 57 `unit2minor $unit`
1815 unit=`expr $i : 'i4bteld\(.*\)'`
1816 mknod i4bteld$unit c 56 `unit2minor $(($offset + $unit))`
1820 unit=`expr $i : 'i4btel\(.*\)'`
1821 mknod i4btel$unit c 56 `unit2minor $unit`
1825 unit=`expr $i : 'i4btrc\(.*\)'`
1826 mknod i4btrc$unit c 59 `unit2minor $unit`
1830 unit=`expr $i : 'aac\(.*\)'`
1831 mknod aac$unit c 150 `unit2minor $unit`
1832 ln -fs aac$unit afa$unit
1833 ln -fs aac$unit hpn$unit
1837 unit=`expr $i : 'mlx\(.*\)'`
1838 mknod mlx$unit c 130 `unit2minor $unit`
1842 unit=`expr $i : 'amr\(.*\)'`
1843 mknod amr$unit c 132 `unit2minor $unit`
1847 unit=`expr $i : 'ips\(.*\)'`
1848 mknod mlx$unit c 175 `unit2minor $unit`
1852 unit=`expr $i : 'ciss\(.*\)'`
1853 mknod ciss$unit c 166 `unit2minor $unit`
1857 mknod agpgart c 148 0
1861 unit=`expr $i : 'twe\(.*\)'`
1862 mknod twe$unit c 146 `unit2minor $unit`
1866 unit=`expr $i : 'tw\(.*\)'`
1867 mknod tw$unit c 19 `unit2minor $unit` root:operator
1871 unit=`expr $i : 'cfs\(.*\)'`
1872 mknod cfs$unit c 93 $unit root:operator
1876 unit=`expr $i : 'nsmb\(.*\)'`
1877 mknod nsmb$unit c 144 $unit
1881 umask 0 # XXX should be elsewhere
1887 echo $i - no such device name