kernel: Remove the no longer used KTR_USB_MEMORY option.
[dragonfly.git] / sys / conf / options
1 # $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $
2 #
3 #        On the handling of kernel options
4 #
5 # All kernel options should be listed in LINT, with suitable
6 # descriptions.  Negative options (options that make some code not
7 # compile) should be commented out; LINT should compile as much code
8 # as possible.  Try to structure option-using code so that a single
9 # option only switch code on, or only switch code off, to make it
10 # possible to have a full compile-test.  If necessary, you can include
11 # "opt_lint.h" and check for COMPILING_LINT to get maximum code
12 # coverage.
13 #
14 # All new options shall also be listed in either "conf/options" or
15 # "platform/<platform>/conf/options".  Options that affect a single
16 # source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while
17 # options that affect multiple files should either go in
18 # "opt_global.h" if this is a kernel-wide option (used just about
19 # everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect
20 # only some files.  Note that the effect of listing only an option
21 # without a header-file-name in conf/options (and cousins) is that the
22 # last convention is followed.
23 #
24 # This handling scheme is not yet fully implemented.
25 #
26 #
27 # Format of this file:
28 # Option name   filename
29 #
30 # If filename is missing, the default is
31 # opt_<name-of-option-in-lower-case>.h
32
33 # Adaptec Array Controller driver options
34 AAC_DEBUG               opt_aac.h
35
36 # Adaptec aic7xxx SCSI controller options
37 AHC_ALLOW_MEMIO         opt_aic7xxx.h   # Allow PCI devices to use memory
38                                         # mapped I/O
39
40 AHC_TMODE_ENABLE        opt_aic7xxx.h   # Bitmap of units to enable
41                                         # targetmode operations.
42
43 AHC_DUMP_EEPROM         opt_aic7xxx.h   # Dump the contents of our
44                                         # configuration prom.
45
46 AHC_DEBUG               opt_aic7xxx.h   # Compile in Aic7xxx Debugging code.
47
48 AHC_DEBUG_OPTS          opt_aic7xxx.h   # Aic7xxx driver debugging options.
49                                         # See sys/dev/aic7xxx/aic7xxx.h
50
51 AHC_REG_PRETTY_PRINT    opt_aic7xxx.h   # Print register bitfields in debug
52                                         # output.  Adds ~15k to driver.
53
54 # Adaptec aic79xx SCSI controller options
55 AHD_DEBUG               opt_aic79xx.h   # Compile in Aic79xx Debugging code.
56
57 AHD_DEBUG_OPTS          opt_aic79xx.h   # Aic79xx driver debugging options.
58                                         # See sys/dev/aic7xxx/aic79xx.h
59
60 AHD_TMODE_ENABLE        opt_aic79xx.h   # Bitmap of units to enable
61                                         # targetmode operations.
62
63 AHD_REG_PRETTY_PRINT    opt_aic79xx.h   # Print register bitfields in debug
64                                         # output.  Adds ~15k to driver.
65
66 ADW_ALLOW_MEMIO         opt_adw.h       # Allow PCI devices to use memory
67                                         # mapped I/O
68 AMR_DEBUG               opt_amr.h
69 TWA_DEBUG               opt_twa.h
70
71 #options for ACPI support
72 ACPI_DEBUG              opt_acpi.h
73 ACPI_NO_SEMAPHORES      opt_acpi.h
74 ACPI_ENABLE_PCI         opt_acpi.h
75
76 # Miscellaneous options.
77 COMPAT_43       opt_compat.h
78 COMPILING_LINT  opt_lint.h
79 DDB
80 DDB_TRACE
81 DDB_UNATTENDED  opt_ddb.h
82 GDB_REMOTE_CHAT opt_ddb.h
83 KTRACE
84 LIBICONV
85 MD_NSECT        opt_md.h
86 MD_ROOT         opt_md.h
87 MD_ROOT_SIZE    opt_md.h
88 MFI_DEBUG       opt_mfi.h
89 NSWAPDEV        opt_swap.h
90 NSWBUF_MIN      opt_swap.h
91 PPS_SYNC        opt_ntp.h
92 QUOTA
93 SUIDDIR         opt_suiddir.h
94 SHMMIN          opt_sysvipc.h
95 SHMMNI          opt_sysvipc.h
96 SHMSEG          opt_sysvipc.h
97 SEMMAP          opt_sysvipc.h
98 SEMMNI          opt_sysvipc.h
99 SEMMNS          opt_sysvipc.h
100 SEMMNU          opt_sysvipc.h
101 SEMMSL          opt_sysvipc.h
102 SEMOPM          opt_sysvipc.h
103 SEMUME          opt_sysvipc.h
104 MSGMNB          opt_sysvipc.h
105 MSGMNI          opt_sysvipc.h
106 MSGSEG          opt_sysvipc.h
107 MSGSSZ          opt_sysvipc.h
108 MSGTQL          opt_sysvipc.h
109 UCONSOLE
110 ICMP_BANDLIM
111 SHOW_BUSYBUFS
112 DIRECTIO        opt_directio.h
113
114 # POSIX kernel options
115 P1003_1B                        opt_posix.h
116 _KPOSIX_PRIORITY_SCHEDULING     opt_posix.h
117 _KPOSIX_VERSION                 opt_posix.h
118
119 # Do we want the config file compiled into the kernel?
120 INCLUDE_CONFIG_FILE     opt_config.h
121
122 # Options for static file systems.  These should only be used at config
123 # time, since the corresponding lkms cannot work if there are any static
124 # dependencies.  Unusability is enforced by hiding the defines for the
125 # options in a never-included header.
126 EXT2FS          opt_dontuse.h
127 FDESC           opt_dontuse.h
128 HAMMER          opt_dontuse.h
129 HPFS            opt_dontuse.h
130 MFS             opt_dontuse.h
131 MSDOSFS         opt_dontuse.h
132 NTFS            opt_dontuse.h
133 NULLFS          opt_dontuse.h
134 PORTAL          opt_dontuse.h
135 PROCFS          opt_dontuse.h
136 PUFFS           opt_dontuse.h
137 SMBFS           opt_dontuse.h
138 TMPFS           opt_dontuse.h
139 UDF             opt_dontuse.h
140
141 # These static filesystems has one slightly bogus static dependency in
142 # sys/platform/.../i386/autoconf.c.  If any of these filesystems are
143 # statically compiled into the kernel, code for mounting them as root
144 # filesystems will be enabled - but look below.  Boot-code is purposely
145 # unavailable for the LKM-based versions.
146 CD9660
147 FFS
148 NFS
149
150 # filesystems and libiconv bridge
151 CD9660_ICONV    opt_dontuse.h
152 MSDOSFS_ICONV   opt_dontuse.h
153 NTFS_ICONV      opt_dontuse.h
154
155 # SMB/CIFS requester
156 NETSMB          opt_netsmb.h
157 NETSMBCRYPTO    opt_netsmb.h
158
159 # If you are following the conditions in the copyright,
160 # you can enable soft-updates which will speed up a lot of things
161 # and make the system safer from crashes at the same time.
162 # otherwise a STUB module will be compiled in.
163 SOFTUPDATES     opt_ffs.h
164
165 # Enable fast hash lookups for large directories on UFS-based filesystems.
166 UFS_DIRHASH     opt_ufs.h
167
168 # The above static dependencies are planned removed, with a
169 # <filesystem>_ROOT option to control if it usable as root.  This list
170 # allows these options to be present in config files already (though
171 # they won't make any difference yet).
172 FFS_ROOT        opt_ffs.h
173 NFS_ROOT        opt_nfsroot.h
174
175 # The union static file system has bogus static dependencies, so it isn't
176 # hidden yet.
177 UNION
178
179 # Options used only in subr_param.c.
180 HZ              opt_param.h
181 MAXFILES        opt_param.h
182 NBUF            opt_param.h
183 NMBCLUSTERS     opt_param.h
184 NMBUFS          opt_param.h
185 VM_BCACHE_SIZE_MAX      opt_param.h
186 VM_SWZONE_SIZE_MAX      opt_param.h
187 MAXUSERS
188 DFLDSIZ         opt_param.h
189 MAXDSIZ         opt_param.h
190 MAXSSIZ         opt_param.h
191
192 # Generic SCSI options.
193 CAM_MAX_HIGHPOWER       opt_cam.h
194 CAMDEBUG                opt_cam.h
195 CAM_DEBUG_DELAY         opt_cam.h
196 CAM_DEBUG_BUS           opt_cam.h
197 CAM_DEBUG_TARGET        opt_cam.h
198 CAM_DEBUG_LUN           opt_cam.h
199 CAM_DEBUG_FLAGS         opt_cam.h
200 SCSI_DELAY              opt_scsi.h
201 SCSI_NO_SENSE_STRINGS   opt_scsi.h
202 SCSI_NO_OP_STRINGS      opt_scsi.h
203
204 # iSCSI options
205 ISCSI_INITIATOR_DEBUG   opt_iscsi_initiator.h
206
207 # Options used only in cam/scsi/scsi_cd.c
208 CHANGER_MIN_BUSY_SECONDS        opt_cd.h
209 CHANGER_MAX_BUSY_SECONDS        opt_cd.h
210
211 # Options used only in cam/scsi/scsi_sa.c.
212 SA_IO_TIMEOUT           opt_sa.h
213 SA_SPACE_TIMEOUT        opt_sa.h
214 SA_REWIND_TIMEOUT       opt_sa.h
215 SA_ERASE_TIMEOUT        opt_sa.h
216 SA_1FM_AT_EOD           opt_sa.h
217
218 # Options used only in cam/scsi/scsi_pt.c
219 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
220
221 # Options used only in cam/scsi/scsi_ses.c
222 SES_ENABLE_PASSTHROUGH  opt_ses.h
223
224 # Options used in dev/sym/ (Symbios SCSI driver).
225 SYM_SETUP_LP_PROBE_MAP  opt_sym.h       #-Low Priority Probe Map (bits)
226                                         # Allows the ncr to take precedence
227                                         # 1 (1<<0) -> 810a, 860
228                                         # 2 (1<<1) -> 825a, 875, 885, 895
229                                         # 4 (1<<2) -> 895a, 896, 1510d 
230 SYM_SETUP_SCSI_DIFF     opt_sym.h       #-HVD support for 825a, 875, 885
231                                         # disabled:0 (default), enabled:1
232 SYM_SETUP_PCI_PARITY    opt_sym.h       #-PCI parity checking
233                                         # disabled:0, enabled:1 (default)
234 SYM_SETUP_MAX_LUN       opt_sym.h       #-Number of LUNs supported
235                                         # default:8, range:[1..64]
236
237 # Options used only in pci/ncr.c
238 SCSI_NCR_DEBUG          opt_ncr.h
239 SCSI_NCR_MAX_SYNC       opt_ncr.h
240 SCSI_NCR_MAX_WIDE       opt_ncr.h
241 SCSI_NCR_MYADDR         opt_ncr.h
242
243 # Options used only in pci/isp_pci.c
244 ISP_TARGET_MODE         opt_isp.h
245
246 # Options used in the 'nata' ATA/ATAPI driver
247 ATA_STATIC_ID           opt_ata.h
248
249 # Net stuff.
250 # altq stuff
251 ALTQ                    opt_global.h
252 ALTQ_CBQ                opt_altq.h
253 ALTQ_RED                opt_altq.h
254 ALTQ_RIO                opt_altq.h
255 ALTQ_HFSC               opt_altq.h
256 ALTQ_PRIQ               opt_altq.h
257 ALTQ_FAIRQ              opt_altq.h
258 ALTQ_NOPCC              opt_altq.h
259 ALTQ_DEBUG              opt_altq.h
260
261 ACCEPT_FILTER_DATA
262 ACCEPT_FILTER_HTTP
263 BOOTP                   opt_bootp.h
264 BOOTP_COMPAT            opt_bootp.h
265 BOOTP_NFSROOT           opt_bootp.h
266 BOOTP_NFSV3             opt_bootp.h
267 BOOTP_WIRED_TO          opt_bootp.h
268 CARP                    opt_carp.h
269 MROUTING                opt_mrouting.h
270 PIM                     opt_mrouting.h
271 INET                    opt_inet.h
272 INET6                   opt_inet6.h
273 IPSEC                   opt_ipsec.h
274 IPSEC_ESP               opt_ipsec.h
275 IPSEC_DEBUG             opt_ipsec.h
276 IPSEC_FILTERGIF         opt_ipsec.h
277 FAST_IPSEC              opt_ipsec.h
278 IPDIVERT
279 DUMMYNET                opt_ipdn.h
280 DUMMYNET_DEBUG          opt_ipdn.h
281 IPFIREWALL              opt_ipfw.h
282 IPFIREWALL_DEBUG        opt_ipfw.h
283 IPFIREWALL_VERBOSE      opt_ipfw.h
284 IPFIREWALL_VERBOSE_LIMIT        opt_ipfw.h
285 IPFIREWALL_DEFAULT_TO_ACCEPT    opt_ipfw.h
286 IPV6FIREWALL            opt_ip6fw.h
287 IPV6FIREWALL_VERBOSE    opt_ip6fw.h
288 IPV6FIREWALL_VERBOSE_LIMIT      opt_ip6fw.h
289 IPV6FIREWALL_DEFAULT_TO_ACCEPT  opt_ip6fw.h
290 IPSTEALTH
291 LIBMCHAIN
292 MPLS                    opt_mpls.h
293 PPP_BSDCOMP             opt_ppp.h
294 PPP_DEFLATE             opt_ppp.h
295 PPP_FILTER              opt_ppp.h
296 SLIP_IFF_OPTS           opt_slip.h
297 TCPDEBUG
298 TCP_SIGNATURE           opt_inet.h
299 TCP_DROP_SYNFIN         opt_tcp_input.h
300 ICMPPRINTFS
301
302 XBONEHACK
303 MBUF_STRESS_TEST        opt_mbuf_stress_test.h
304
305 # (New netgraph, port still in progress)
306 #
307 # Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code.
308 # Each netgraph node type can be either be compiled into the kernel
309 # or loaded dynamically. To get the former, include the corresponding
310 # option below. Each type has its own man page, e.g. ng_async(4).
311 NETGRAPH7
312 NETGRAPH7_DEBUG         opt_netgraph.h
313 NETGRAPH7_ASYNC         opt_netgraph.h
314 NETGRAPH7_ATMLLC        opt_netgraph.h
315 NETGRAPH7_ATM_ATMPIF    opt_netgraph.h
316 NETGRAPH7_BLUETOOTH             opt_netgraph.h
317 NETGRAPH7_BLUETOOTH_BT3C        opt_netgraph.h
318 NETGRAPH7_BLUETOOTH_H4          opt_netgraph.h
319 NETGRAPH7_BLUETOOTH_HCI         opt_netgraph.h
320 NETGRAPH7_BLUETOOTH_L2CAP       opt_netgraph.h
321 NETGRAPH7_BLUETOOTH_SOCKET      opt_netgraph.h
322 NETGRAPH7_BLUETOOTH_UBT         opt_netgraph.h
323 NETGRAPH7_BLUETOOTH_UBTBCMFW    opt_netgraph.h
324 NETGRAPH7_BPF           opt_netgraph.h
325 NETGRAPH7_BRIDGE        opt_netgraph.h
326 NETGRAPH7_CAR           opt_netgraph.h
327 NETGRAPH7_CISCO         opt_netgraph.h
328 NETGRAPH7_DEFLATE       opt_netgraph.h
329 NETGRAPH7_DEVICE        opt_netgraph.h
330 NETGRAPH7_ECHO          opt_netgraph.h
331 NETGRAPH7_EIFACE        opt_netgraph.h
332 NETGRAPH7_ETF           opt_netgraph.h
333 NETGRAPH7_ETHER         opt_netgraph.h
334 NETGRAPH7_FEC           opt_netgraph.h
335 NETGRAPH7_FRAME_RELAY   opt_netgraph.h
336 NETGRAPH7_GIF           opt_netgraph.h
337 NETGRAPH7_GIF_DEMUX     opt_netgraph.h
338 NETGRAPH7_HOLE          opt_netgraph.h
339 NETGRAPH7_HUB           opt_netgraph.h
340 NETGRAPH7_IFACE         opt_netgraph.h
341 NETGRAPH7_IP_INPUT      opt_netgraph.h
342 NETGRAPH7_IPFW          opt_netgraph.h
343 NETGRAPH7_KSOCKET       opt_netgraph.h
344 NETGRAPH7_L2TP          opt_netgraph.h
345 NETGRAPH7_LMI           opt_netgraph.h
346 # MPPC compression requires proprietary files (not included)
347 NETGRAPH7_MPPC_COMPRESSION      opt_netgraph.h
348 NETGRAPH7_MPPC_ENCRYPTION       opt_netgraph.h
349 NETGRAPH7_NAT           opt_netgraph.h
350 NETGRAPH7_NETFLOW       opt_netgraph.h
351 NETGRAPH7_ONE2MANY      opt_netgraph.h
352 NETGRAPH7_PPP           opt_netgraph.h
353 NETGRAPH7_PPPOE         opt_netgraph.h
354 NETGRAPH7_PPTPGRE       opt_netgraph.h
355 NETGRAPH7_PRED1         opt_netgraph.h
356 NETGRAPH7_RFC1490       opt_netgraph.h
357 NETGRAPH7_SOCKET        opt_netgraph.h
358 NETGRAPH7_SPLIT         opt_netgraph.h
359 NETGRAPH7_SPPP          opt_netgraph.h
360 NETGRAPH7_TAG           opt_netgraph.h
361 NETGRAPH7_TCPMSS        opt_netgraph.h
362 NETGRAPH7_TEE           opt_netgraph.h
363 NETGRAPH7_TTY           opt_netgraph.h
364 NETGRAPH7_UI            opt_netgraph.h
365 NETGRAPH7_VJC           opt_netgraph.h
366
367 # NgATM options
368 NGATM7_ATM              opt_netgraph.h
369 NGATM7_ATMBASE          opt_netgraph.h
370 NGATM7_SSCOP            opt_netgraph.h
371 NGATM7_SSCFU            opt_netgraph.h
372 NGATM7_UNI              opt_netgraph.h
373 NGATM7_CCATM            opt_netgraph.h
374
375 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
376 # Each netgraph node type can be either be compiled into the kernel
377 # or loaded dynamically. To get the former, include the corresponding
378 # option below. Each type has its own man page, e.g. ng_async(8).
379 NETGRAPH
380 NETGRAPH_ASYNC          opt_netgraph.h
381 NETGRAPH_BPF            opt_netgraph.h
382 NETGRAPH_BRIDGE         opt_netgraph.h
383 NETGRAPH_CISCO          opt_netgraph.h
384 NETGRAPH_ECHO           opt_netgraph.h
385 NETGRAPH_EIFACE         opt_netgraph.h
386 NETGRAPH_ETHER          opt_netgraph.h
387 NETGRAPH_FEC            opt_netgraph.h
388 NETGRAPH_FRAME_RELAY    opt_netgraph.h
389 NETGRAPH_HOLE           opt_netgraph.h
390 NETGRAPH_IFACE          opt_netgraph.h
391 NETGRAPH_KSOCKET        opt_netgraph.h
392 NETGRAPH_LMI            opt_netgraph.h
393 NETGRAPH_L2TP           opt_netgraph.h
394 # MPPC compression requires proprietary files (not included)
395 NETGRAPH_MPPC_COMPRESSION       opt_netgraph.h
396 NETGRAPH_MPPC_ENCRYPTION        opt_netgraph.h
397 NETGRAPH_ONE2MANY       opt_netgraph.h
398 NETGRAPH_PPP            opt_netgraph.h
399 NETGRAPH_PPPOE          opt_netgraph.h
400 NETGRAPH_PPTPGRE        opt_netgraph.h
401 NETGRAPH_RFC1490        opt_netgraph.h
402 NETGRAPH_SOCKET         opt_netgraph.h
403 NETGRAPH_TEE            opt_netgraph.h
404 NETGRAPH_TTY            opt_netgraph.h
405 NETGRAPH_UI             opt_netgraph.h
406 NETGRAPH_VJC            opt_netgraph.h
407
408 # AGP options
409 AGP_DEBUG               opt_agp.h
410
411 # DRM options
412 DRM_DEBUG               opt_drm.h
413 DRM_LINUX               opt_drm.h
414
415 # DPT driver debug flags
416 DPT_MEASURE_PERFORMANCE opt_dpt.h
417 DPT_HANDLE_TIMEOUTS     opt_dpt.h
418 DPT_TIMEOUT_FACTOR      opt_dpt.h
419 DPT_LOST_IRQ            opt_dpt.h
420 DPT_RESET_HBA           opt_dpt.h
421
422 # Misc debug flags.  Most of these should probably be replaced with
423 # 'DEBUG', and then let people recompile just the interesting modules
424 # with 'make CC="cc -DDEBUG"'.
425 CLUSTERDEBUG            opt_debug_cluster.h
426 DEBUG_1284              opt_ppb_1284.h
427 VP0_DEBUG               opt_vpo.h
428 LPT_DEBUG               opt_lpt.h
429 PLIP_DEBUG              opt_plip.h
430 LOCKF_DEBUG             opt_debug_lockf.h
431 SI_DEBUG                opt_debug_si.h
432
433 # Fb options
434 FB_DEBUG                opt_fb.h
435 FB_INSTALL_CDEV         opt_fb.h
436
437 # ppbus related options
438 PERIPH_1284             opt_ppb_1284.h
439 DONTPROBE_1284          opt_ppb_1284.h
440
441 # smbus related options
442 ENABLE_ALART            opt_intpm.h
443
444 # These cause changes all over the kernel
445 NO_LWKT_SPLIT_USERPRI   opt_global.h
446 BLKDEV_IOSIZE           opt_global.h
447 DEBUG                   opt_global.h
448 DEBUG_LOCKS             opt_global.h
449 DEBUG_LOCKS_LATENCY     opt_global.h
450 DEBUG_CRIT_SECTIONS     opt_global.h
451 DIAGNOSTIC              opt_global.h
452 INVARIANTS              opt_global.h
453 VFS_BIO_DEBUG           opt_global.h
454 DEBUG_INTERRUPTS        opt_global.h
455 SOCKBUF_DEBUG           opt_global.h
456 PANIC_DEBUG             opt_global.h
457 MBUF_DEBUG              opt_global.h
458 PMAP_DEBUG              opt_global.h
459 VM_PAGE_DEBUG           opt_global.h
460 SLAB_DEBUG              opt_global.h
461
462 # Sample system/interrupt PC
463 DEBUG_PCTRACK           opt_pctrack.h
464
465 # These are VM related options
466 NO_SWAPPING             opt_vm.h
467
468 # sys/netkey
469 KEY
470
471 # Size of the kernel message buffer
472 MSGBUF_SIZE             opt_msgbuf.h
473
474 # PCI related options
475 COMPAT_OLDPCI
476
477 # NFS options
478 NFS_MINATTRTIMO         opt_nfs.h
479 NFS_MAXATTRTIMO         opt_nfs.h
480 NFS_MINDIRATTRTIMO      opt_nfs.h
481 NFS_MAXDIRATTRTIMO      opt_nfs.h
482 NFS_GATHERDELAY         opt_nfs.h
483 NFS_UIDHASHSIZ          opt_nfs.h
484 NFS_WDELAYHASHSIZ       opt_nfs.h
485 NFS_MUIDHASHSIZ         opt_nfs.h
486 NFS_NOSERVER            opt_nfs.h
487 NFS_DEBUG               opt_nfs.h
488
489 # MSDOSFS options
490 MSDOSFS_DEBUG           opt_msdosfs.h
491
492 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
493 BROOKTREE_SYSTEM_DEFAULT        opt_bktr.h
494 BROOKTREE_ALLOC_PAGES           opt_bktr.h
495 BKTR_OVERRIDE_CARD              opt_bktr.h
496 BKTR_OVERRIDE_TUNER             opt_bktr.h
497 BKTR_OVERRIDE_DBX               opt_bktr.h
498 BKTR_OVERRIDE_MSP               opt_bktr.h
499 BKTR_SYSTEM_DEFAULT             opt_bktr.h
500 BKTR_ALLOC_PAGES                opt_bktr.h
501 BKTR_USE_PLL                    opt_bktr.h      
502 BKTR_GPIO_ACCESS                opt_bktr.h
503 BKTR_NO_MSP_RESET               opt_bktr.h
504 BKTR_430_FX_MODE                opt_bktr.h
505 BKTR_SIS_VIA_MODE               opt_bktr.h
506 BKTR_NEW_MSP34XX_DRIVER         opt_bktr.h
507
508 # Various mi ISA bus flags
509 COM_ESP                 opt_sio.h
510 COM_MULTIPORT           opt_sio.h
511 BREAK_TO_DEBUGGER       opt_comconsole.h
512 ALT_BREAK_TO_DEBUGGER   opt_comconsole.h
513
514 # options for bus/device framework
515 BUS_DEBUG               opt_bus.h
516
517 # options for USB support
518 OHCI_DEBUG              opt_usb.h
519 USB_DEBUG               opt_usb.h
520
521 # Vinum options
522 VINUMDEBUG              opt_vinum.h
523
524 # Embedded system options
525 UKBD_DFLT_KEYMAP        opt_ukbd.h
526 INIT_PATH               opt_init_path.h
527
528 ROOTDEVNAME             opt_rootdevname.h
529
530 FDC_DEBUG               opt_fdc.h
531 PCFCLOCK_VERBOSE        opt_pcfclock.h
532 PCFCLOCK_MAX_RETRIES    opt_pcfclock.h
533
534 # Network device queue based polling
535 IFPOLL_ENABLE           opt_ifpoll.h
536
537 # options for ubsec driver
538 UBSEC_DEBUG             opt_ubsec.h
539 UBSEC_RNDTEST           opt_ubsec.h
540 UBSEC_NO_RNG            opt_ubsec.h
541
542 # options for hifn driver
543 HIFN_DEBUG              opt_hifn.h
544 HIFN_RNDTEST            opt_hifn.h
545 HIFN_NO_RNG             opt_hifn.h
546
547 # options for safenet driver
548 SAFE_DEBUG              opt_safe.h
549 SAFE_NO_RNG             opt_safe.h
550 SAFE_RNDTEST            opt_safe.h
551
552 # KTR options
553 KTR                             opt_global.h
554 KTR_ENTRIES                     opt_global.h
555 KTR_ALL                         opt_ktr.h
556 KTR_ACPI_EC                     opt_ktr.h
557 KTR_CTXSW                       opt_ktr.h
558 KTR_DMCRYPT                     opt_ktr.h
559 KTR_DSCHED_BFQ                  opt_ktr.h
560 KTR_ETHERNET                    opt_ktr.h
561 KTR_HAMMER                      opt_ktr.h
562 KTR_IFQ                         opt_ktr.h
563 KTR_IF_BGE                      opt_ktr.h
564 KTR_IF_EM                       opt_ktr.h
565 KTR_IF_EMX                      opt_ktr.h
566 KTR_IF_START                    opt_ktr.h
567 KTR_IPIQ                        opt_ktr.h
568 KTR_KERNENTRY                   opt_ktr.h
569 KTR_MEMORY                      opt_ktr.h
570 KTR_SERIALIZER                  opt_ktr.h
571 KTR_SPIN_CONTENTION             opt_ktr.h
572 KTR_TESTLOG                     opt_ktr.h
573 KTR_TOKENS                      opt_ktr.h
574 KTR_TSLEEP                      opt_ktr.h
575 KTR_USCHED_BSD4                 opt_ktr.h
576 KTR_USCHED_DFLY                 opt_ktr.h
577 KTR_VERBOSE                     opt_ktr.h
578 KTR_IF_POLL                     opt_ktr.h
579 KTR_UDP                         opt_ktr.h
580
581 # NTFS options
582 NTFS_DEBUG                      opt_ntfs.h
583
584 # options for the Atheros driver
585 ATH_DEBUG               opt_ath.h
586 #ATH_DEBUG_ALQ          opt_ath.h
587 ATH_DIAGAPI             opt_ath.h
588 #ATH_EEPROM_FIRMWARE    opt_ath.h
589 #ATH_ENABLE_11N         opt_ath.h
590 ATH_ENABLE_DFS          opt_ath.h
591 #ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h
592 ATH_KTR_INTR_DEBUG      opt_ath.h
593 ATH_RXBUF               opt_ath.h
594 #ATH_TX99_DIAG          opt_ath.h
595 ATH_TXBUF               opt_ath.h
596
597 # ...and its HAL
598 AH_AR5416_INTERRUPT_MITIGATION opt_ah.h
599 AH_ASSERT               opt_ah.h
600 AH_DEBUG                opt_ah.h
601 #AH_DEBUG_ALQ           opt_ah.h
602 #AH_DEBUG_COUNTRY       opt_ah.h
603 AH_INTERRUPT_DEBUGGING  opt_ah.h
604 AH_MAXCHAN              opt_ah.h
605 AH_NEED_DESC_SWAP       opt_ah.h
606 AH_PRIVATE_DIAG         opt_ah.h
607 AH_REGOPS_FUNC          opt_ah.h
608 AH_RXCFG_SDMAMW_4BYTES  opt_ah.h
609 AH_SUPPORT_AR5416       opt_ah.h
610 AH_SUPPORT_AR9130       opt_ah.h
611 AH_SUPPORT_AR9330       opt_ah.h
612 AH_SUPPORT_AR9340       opt_ah.h
613 AH_USE_INIPDGAIN        opt_ah.h
614 #AH_WRITE_EEPROM                opt_ah.h
615 #AH_WRITE_REGDOMAIN     opt_ah.h
616
617 # bce driver
618 BCE_RSS_DEBUG           opt_bce.h
619 BCE_TSS_DEBUG           opt_bce.h
620
621 # bnx driver
622 BNX_RSS_DEBUG           opt_bnx.h
623 BNX_TSO_DEBUG           opt_bnx.h
624 BNX_TSS_DEBUG           opt_bnx.h
625
626 # bwn driver
627 BWN_DEBUG               opt_bwn.h
628 BWN_RXRING_SLOTS        opt_bwn.h
629 BWN_TXRING_SLOTS        opt_bwn.h
630
631 # siba_bwn driver
632 SIBA_DEBUG              opt_siba.h
633
634 # ed driver
635 ED_NO_MIIBUS            opt_ed.h
636
637 # emx driver
638 EMX_RSS_DEBUG           opt_emx.h
639 EMX_TSO_DEBUG           opt_emx.h
640 EMX_TSS_DEBUG           opt_emx.h
641
642 # jme driver
643 JME_RSS_DEBUG           opt_jme.h
644
645 # igb driver
646 IGB_RSS_DEBUG           opt_igb.h
647 IGB_TSS_DEBUG           opt_igb.h
648 IGB_MSIX_DEBUG          opt_igb.h
649
650 # ix driver
651 IX_RSS_DEBUG            opt_ix.h
652
653 # Options for the Intel 802.11n wireless driver
654 IWN_DEBUG               opt_iwn.h
655
656 # dcons options
657 DCONS_BUF_SIZE          opt_dcons.h
658 DCONS_POLL_HZ           opt_dcons.h
659 DCONS_FORCE_CONSOLE     opt_dcons.h
660 DCONS_FORCE_GDB         opt_dcons.h
661
662 # deprecated drivers and options
663 I_WANT_DEPRECATED_STUFF opt_deprecated.h
664
665 # SCTP
666 SCTP                    opt_sctp.h
667 SCTP_DEBUG              opt_sctp.h
668 SCTP_USE_ADLER32        opt_sctp.h
669 SCTP_HIGH_SPEED         opt_sctp.h
670 SCTP_STAT_LOGGING       opt_sctp.h
671 SCTP_CWND_LOGGING       opt_sctp.h
672 SCTP_BLK_LOGGING        opt_sctp.h
673 SCTP_STR_LOGGING        opt_sctp.h
674 SCTP_FR_LOGGING         opt_sctp.h
675 SCTP_MAP_LOGGING        opt_sctp.h
676
677 # DSCHED stuff
678 DSCHED_AS               opt_dsched.h
679 DSCHED_BFQ              opt_dsched.h
680 DSCHED_FQ               opt_dsched.h
681
682 # Receive Side Scaling (now basecode)
683 RSS_DEBUG               opt_rss.h
684
685 # Panic settings
686 WDOG_DISABLE_ON_PANIC   opt_panic.h
687 ERROR_LED_ON_PANIC      opt_panic.h
688
689 # 802.11 support layer
690 IEEE80211_DEBUG         opt_wlan.h
691 IEEE80211_DEBUG_REFCNT  opt_wlan.h
692 IEEE80211_AMPDU_AGE     opt_wlan.h
693 IEEE80211_SUPPORT_MESH  opt_wlan.h
694 IEEE80211_SUPPORT_SUPERG        opt_wlan.h
695 IEEE80211_SUPPORT_TDMA  opt_wlan.h
696
697 # 802.11 TDMA support
698 TDMA_SLOTLEN_DEFAULT    opt_tdma.h
699 TDMA_SLOTCNT_DEFAULT    opt_tdma.h
700 TDMA_BINTVAL_DEFAULT    opt_tdma.h
701 TDMA_TXRATE_11B_DEFAULT opt_tdma.h
702 TDMA_TXRATE_11G_DEFAULT opt_tdma.h
703 TDMA_TXRATE_11A_DEFAULT opt_tdma.h
704 TDMA_TXRATE_TURBO_DEFAULT       opt_tdma.h
705 TDMA_TXRATE_HALF_DEFAULT        opt_tdma.h
706 TDMA_TXRATE_QUARTER_DEFAULT     opt_tdma.h
707 TDMA_TXRATE_11NA_DEFAULT        opt_tdma.h
708 TDMA_TXRATE_11NG_DEFAULT        opt_tdma.h
709
710 PANIC_REBOOT_WAIT_TIME  opt_panic.h
711
712 # Obsolete options (will be removed in the future)
713 #
714 SYSVMSG                 opt_dontuse.h
715 SYSVSEM                 opt_dontuse.h
716 SYSVSHM                 opt_dontuse.h