1 /* Basic 80960 instruction formats.
3 * The 'COJ' instructions are actually COBR instructions with the 'b' in
4 * the mnemonic replaced by a 'j'; they are ALWAYS "de-optimized" if necessary:
5 * if the displacement will not fit in 13 bits, the assembler will replace them
6 * with the corresponding compare and branch instructions.
8 * All of the 'MEMn' instructions are the same format; the 'n' in the name
9 * indicates the default index scale factor (the size of the datum operated on).
11 * The FBRA formats are not actually an instruction format. They are the
12 * "convenience directives" for branching on floating-point comparisons,
13 * each of which generates 2 instructions (a 'bno' and one other branch).
15 * The CALLJ format is not actually an instruction format. It indicates that
16 * the instruction generated (a CTRL-format 'call') should have its relocation
17 * specially flagged for link-time replacement with a 'bal' or 'calls' if
22 * $FreeBSD: src/gnu/usr.bin/as/opcode/i960.h,v 1.5 1999/08/27 23:34:33 peter Exp $
23 * $DragonFly: src/gnu/usr.bin/as/opcode/Attic/i960.h,v 1.2 2003/06/17 04:25:44 dillon Exp $
39 /* Masks for the mode bits in REG format instructions */
44 /* Generate the 12-bit opcode for a REG format instruction by placing the
45 * high 8 bits in instruction bits 24-31, the low 4 bits in instruction bits
49 #define REG_OPC(opc) ((opc & 0xff0) << 20) | ((opc & 0xf) << 7)
51 /* Generate a template for a REG format instruction: place the opcode bits
52 * in the appropriate fields and OR in mode bits for the operands that will not
54 * set m1=1, if src1 will not be used
55 * set m2=1, if src2 will not be used
56 * set m3=1, if dst will not be used
58 * Setting the "unused" mode bits to 1 speeds up instruction execution(!).
59 * The information is also useful to us because some 1-operand REG instructions
60 * use the src1 field, others the dst field; and some 2-operand REG instructions
61 * use src1/src2, others src1/dst. The set mode bits enable us to distinguish.
63 #define R_0(opc) ( REG_OPC(opc) | M1 | M2 | M3 ) /* No operands */
64 #define R_1(opc) ( REG_OPC(opc) | M2 | M3 ) /* 1 operand: src1 */
65 #define R_1D(opc) ( REG_OPC(opc) | M1 | M2 ) /* 1 operand: dst */
66 #define R_2(opc) ( REG_OPC(opc) | M3 ) /* 2 ops: src1/src2 */
67 #define R_2D(opc) ( REG_OPC(opc) | M2 ) /* 2 ops: src1/dst */
68 #define R_3(opc) ( REG_OPC(opc) ) /* 3 operands */
70 /* DESCRIPTOR BYTES FOR REGISTER OPERANDS
72 * Interpret names as follows:
73 * R: global or local register only
74 * RS: global, local, or (if target allows) special-function register only
75 * RL: global or local register, or integer literal
76 * RSL: global, local, or (if target allows) special-function register;
78 * F: global, local, or floating-point register
79 * FL: global, local, or floating-point register; or literal (including
82 * A number appended to a name indicates that registers must be aligned,
84 * 2: register number must be multiple of 2
85 * 4: register number must be multiple of 4
88 #define SFR 0x10 /* Mask for the "sfr-OK" bit */
89 #define LIT 0x08 /* Mask for the "literal-OK" bit */
90 #define FP 0x04 /* Mask for "floating-point-OK" bit */
92 /* This macro ors the bits together. Note that 'align' is a mask
93 * for the low 0, 1, or 2 bits of the register number, as appropriate.
95 #define OP(align,lit,fp,sfr) ( align | lit | fp | sfr )
97 #define R OP( 0, 0, 0, 0 )
98 #define RS OP( 0, 0, 0, SFR )
99 #define RL OP( 0, LIT, 0, 0 )
100 #define RSL OP( 0, LIT, 0, SFR )
101 #define F OP( 0, 0, FP, 0 )
102 #define FL OP( 0, LIT, FP, 0 )
103 #define R2 OP( 1, 0, 0, 0 )
104 #define RL2 OP( 1, LIT, 0, 0 )
105 #define F2 OP( 1, 0, FP, 0 )
106 #define FL2 OP( 1, LIT, FP, 0 )
107 #define R4 OP( 3, 0, 0, 0 )
108 #define RL4 OP( 3, LIT, 0, 0 )
109 #define F4 OP( 3, 0, FP, 0 )
110 #define FL4 OP( 3, LIT, FP, 0 )
112 #define M 0x7f /* Memory operand (MEMA & MEMB format instructions) */
114 /* Macros to extract info from the register operand descriptor byte 'od'.
116 #define SFR_OK(od) (od & SFR) /* TRUE if sfr operand allowed */
117 #define LIT_OK(od) (od & LIT) /* TRUE if literal operand allowed */
118 #define FP_OK(od) (od & FP) /* TRUE if floating-point op allowed */
119 #define REG_ALIGN(od,n) ((od & 0x3 & n) == 0)
120 /* TRUE if reg #n is properly aligned */
121 #define MEMOP(od) (od == M) /* TRUE if operand is a memory operand*/
123 /* Description of a single i80960 instruction */
125 long opcode; /* 32 bits, constant fields filled in, rest zeroed */
126 char *name; /* Assembler mnemonic */
127 short iclass; /* Class: see #defines below */
128 char format; /* REG, COBR, CTRL, MEMn, COJ, FBRA, or CALLJ */
129 char num_ops; /* Number of operands */
130 char operand[3];/* Operand descriptors; same order as assembler instr */
133 /* Classes of 960 intructions:
134 * - each instruction falls into one class.
135 * - each target architecture supports one or more classes.
137 * EACH CONSTANT MUST CONTAIN 1 AND ONLY 1 SET BIT!: see targ_has_iclass().
139 #define I_BASE 0x01 /* 80960 base instruction set */
140 #define I_CX 0x02 /* 80960Cx instruction */
141 #define I_DEC 0x04 /* Decimal instruction */
142 #define I_FP 0x08 /* Floating point instruction */
143 #define I_KX 0x10 /* 80960Kx instruction */
144 #define I_MIL 0x20 /* Military instruction */
145 #define I_CASIM 0x40 /* CA simulator instruction */
147 /******************************************************************************
149 * TABLE OF i960 INSTRUCTION DESCRIPTIONS
151 ******************************************************************************/
153 const struct i960_opcode i960_opcodes[] = {
155 /* if a CTRL instruction has an operand, it's always a displacement */
157 { 0x09000000, "callj", I_BASE, CALLJ, 1 },/*default=='call'*/
158 { 0x08000000, "b", I_BASE, CTRL, 1 },
159 { 0x09000000, "call", I_BASE, CTRL, 1 },
160 { 0x0a000000, "ret", I_BASE, CTRL, 0 },
161 { 0x0b000000, "bal", I_BASE, CTRL, 1 },
162 { 0x10000000, "bno", I_BASE, CTRL, 1 },
163 { 0x10000000, "bf", I_BASE, CTRL, 1 }, /* same as bno */
164 { 0x10000000, "bru", I_BASE, CTRL, 1 }, /* same as bno */
165 { 0x11000000, "bg", I_BASE, CTRL, 1 },
166 { 0x11000000, "brg", I_BASE, CTRL, 1 }, /* same as bg */
167 { 0x12000000, "be", I_BASE, CTRL, 1 },
168 { 0x12000000, "bre", I_BASE, CTRL, 1 }, /* same as be */
169 { 0x13000000, "bge", I_BASE, CTRL, 1 },
170 { 0x13000000, "brge", I_BASE, CTRL, 1 }, /* same as bge */
171 { 0x14000000, "bl", I_BASE, CTRL, 1 },
172 { 0x14000000, "brl", I_BASE, CTRL, 1 }, /* same as bl */
173 { 0x15000000, "bne", I_BASE, CTRL, 1 },
174 { 0x15000000, "brlg", I_BASE, CTRL, 1 }, /* same as bne */
175 { 0x16000000, "ble", I_BASE, CTRL, 1 },
176 { 0x16000000, "brle", I_BASE, CTRL, 1 }, /* same as ble */
177 { 0x17000000, "bo", I_BASE, CTRL, 1 },
178 { 0x17000000, "bt", I_BASE, CTRL, 1 }, /* same as bo */
179 { 0x17000000, "bro", I_BASE, CTRL, 1 }, /* same as bo */
180 { 0x18000000, "faultno", I_BASE, CTRL, 0 },
181 { 0x18000000, "faultf", I_BASE, CTRL, 0 }, /*same as faultno*/
182 { 0x19000000, "faultg", I_BASE, CTRL, 0 },
183 { 0x1a000000, "faulte", I_BASE, CTRL, 0 },
184 { 0x1b000000, "faultge", I_BASE, CTRL, 0 },
185 { 0x1c000000, "faultl", I_BASE, CTRL, 0 },
186 { 0x1d000000, "faultne", I_BASE, CTRL, 0 },
187 { 0x1e000000, "faultle", I_BASE, CTRL, 0 },
188 { 0x1f000000, "faulto", I_BASE, CTRL, 0 },
189 { 0x1f000000, "faultt", I_BASE, CTRL, 0 }, /* syn for faulto */
191 { 0x01000000, "syscall", I_CASIM,CTRL, 0 },
193 /* If a COBR (or COJ) has 3 operands, the last one is always a
194 * displacement and does not appear explicitly in the table.
197 { 0x20000000, "testno", I_BASE, COBR, 1, R },
198 { 0x21000000, "testg", I_BASE, COBR, 1, R },
199 { 0x22000000, "teste", I_BASE, COBR, 1, R },
200 { 0x23000000, "testge", I_BASE, COBR, 1, R },
201 { 0x24000000, "testl", I_BASE, COBR, 1, R },
202 { 0x25000000, "testne", I_BASE, COBR, 1, R },
203 { 0x26000000, "testle", I_BASE, COBR, 1, R },
204 { 0x27000000, "testo", I_BASE, COBR, 1, R },
205 { 0x30000000, "bbc", I_BASE, COBR, 3, RL, RS },
206 { 0x31000000, "cmpobg", I_BASE, COBR, 3, RL, RS },
207 { 0x32000000, "cmpobe", I_BASE, COBR, 3, RL, RS },
208 { 0x33000000, "cmpobge", I_BASE, COBR, 3, RL, RS },
209 { 0x34000000, "cmpobl", I_BASE, COBR, 3, RL, RS },
210 { 0x35000000, "cmpobne", I_BASE, COBR, 3, RL, RS },
211 { 0x36000000, "cmpoble", I_BASE, COBR, 3, RL, RS },
212 { 0x37000000, "bbs", I_BASE, COBR, 3, RL, RS },
213 { 0x38000000, "cmpibno", I_BASE, COBR, 3, RL, RS },
214 { 0x39000000, "cmpibg", I_BASE, COBR, 3, RL, RS },
215 { 0x3a000000, "cmpibe", I_BASE, COBR, 3, RL, RS },
216 { 0x3b000000, "cmpibge", I_BASE, COBR, 3, RL, RS },
217 { 0x3c000000, "cmpibl", I_BASE, COBR, 3, RL, RS },
218 { 0x3d000000, "cmpibne", I_BASE, COBR, 3, RL, RS },
219 { 0x3e000000, "cmpible", I_BASE, COBR, 3, RL, RS },
220 { 0x3f000000, "cmpibo", I_BASE, COBR, 3, RL, RS },
221 { 0x31000000, "cmpojg", I_BASE, COJ, 3, RL, RS },
222 { 0x32000000, "cmpoje", I_BASE, COJ, 3, RL, RS },
223 { 0x33000000, "cmpojge", I_BASE, COJ, 3, RL, RS },
224 { 0x34000000, "cmpojl", I_BASE, COJ, 3, RL, RS },
225 { 0x35000000, "cmpojne", I_BASE, COJ, 3, RL, RS },
226 { 0x36000000, "cmpojle", I_BASE, COJ, 3, RL, RS },
227 { 0x38000000, "cmpijno", I_BASE, COJ, 3, RL, RS },
228 { 0x39000000, "cmpijg", I_BASE, COJ, 3, RL, RS },
229 { 0x3a000000, "cmpije", I_BASE, COJ, 3, RL, RS },
230 { 0x3b000000, "cmpijge", I_BASE, COJ, 3, RL, RS },
231 { 0x3c000000, "cmpijl", I_BASE, COJ, 3, RL, RS },
232 { 0x3d000000, "cmpijne", I_BASE, COJ, 3, RL, RS },
233 { 0x3e000000, "cmpijle", I_BASE, COJ, 3, RL, RS },
234 { 0x3f000000, "cmpijo", I_BASE, COJ, 3, RL, RS },
236 { 0x80000000, "ldob", I_BASE, MEM1, 2, M, R },
237 { 0x82000000, "stob", I_BASE, MEM1, 2, R , M },
238 { 0x84000000, "bx", I_BASE, MEM1, 1, M },
239 { 0x85000000, "balx", I_BASE, MEM1, 2, M, R },
240 { 0x86000000, "callx", I_BASE, MEM1, 1, M },
241 { 0x88000000, "ldos", I_BASE, MEM2, 2, M, R },
242 { 0x8a000000, "stos", I_BASE, MEM2, 2, R , M },
243 { 0x8c000000, "lda", I_BASE, MEM1, 2, M, R },
244 { 0x90000000, "ld", I_BASE, MEM4, 2, M, R },
245 { 0x92000000, "st", I_BASE, MEM4, 2, R , M },
246 { 0x98000000, "ldl", I_BASE, MEM8, 2, M, R2 },
247 { 0x9a000000, "stl", I_BASE, MEM8, 2, R2 ,M },
248 { 0xa0000000, "ldt", I_BASE, MEM12, 2, M, R4 },
249 { 0xa2000000, "stt", I_BASE, MEM12, 2, R4 ,M },
250 { 0xb0000000, "ldq", I_BASE, MEM16, 2, M, R4 },
251 { 0xb2000000, "stq", I_BASE, MEM16, 2, R4 ,M },
252 { 0xc0000000, "ldib", I_BASE, MEM1, 2, M, R },
253 { 0xc2000000, "stib", I_BASE, MEM1, 2, R , M },
254 { 0xc8000000, "ldis", I_BASE, MEM2, 2, M, R },
255 { 0xca000000, "stis", I_BASE, MEM2, 2, R , M },
257 { R_3(0x580), "notbit", I_BASE, REG, 3, RSL,RSL,RS },
258 { R_3(0x581), "and", I_BASE, REG, 3, RSL,RSL,RS },
259 { R_3(0x582), "andnot", I_BASE, REG, 3, RSL,RSL,RS },
260 { R_3(0x583), "setbit", I_BASE, REG, 3, RSL,RSL,RS },
261 { R_3(0x584), "notand", I_BASE, REG, 3, RSL,RSL,RS },
262 { R_3(0x586), "xor", I_BASE, REG, 3, RSL,RSL,RS },
263 { R_3(0x587), "or", I_BASE, REG, 3, RSL,RSL,RS },
264 { R_3(0x588), "nor", I_BASE, REG, 3, RSL,RSL,RS },
265 { R_3(0x589), "xnor", I_BASE, REG, 3, RSL,RSL,RS },
266 { R_2D(0x58a), "not", I_BASE, REG, 2, RSL,RS },
267 { R_3(0x58b), "ornot", I_BASE, REG, 3, RSL,RSL,RS },
268 { R_3(0x58c), "clrbit", I_BASE, REG, 3, RSL,RSL,RS },
269 { R_3(0x58d), "notor", I_BASE, REG, 3, RSL,RSL,RS },
270 { R_3(0x58e), "nand", I_BASE, REG, 3, RSL,RSL,RS },
271 { R_3(0x58f), "alterbit", I_BASE, REG, 3, RSL,RSL,RS },
272 { R_3(0x590), "addo", I_BASE, REG, 3, RSL,RSL,RS },
273 { R_3(0x591), "addi", I_BASE, REG, 3, RSL,RSL,RS },
274 { R_3(0x592), "subo", I_BASE, REG, 3, RSL,RSL,RS },
275 { R_3(0x593), "subi", I_BASE, REG, 3, RSL,RSL,RS },
276 { R_3(0x598), "shro", I_BASE, REG, 3, RSL,RSL,RS },
277 { R_3(0x59a), "shrdi", I_BASE, REG, 3, RSL,RSL,RS },
278 { R_3(0x59b), "shri", I_BASE, REG, 3, RSL,RSL,RS },
279 { R_3(0x59c), "shlo", I_BASE, REG, 3, RSL,RSL,RS },
280 { R_3(0x59d), "rotate", I_BASE, REG, 3, RSL,RSL,RS },
281 { R_3(0x59e), "shli", I_BASE, REG, 3, RSL,RSL,RS },
282 { R_2(0x5a0), "cmpo", I_BASE, REG, 2, RSL,RSL },
283 { R_2(0x5a1), "cmpi", I_BASE, REG, 2, RSL,RSL },
284 { R_2(0x5a2), "concmpo", I_BASE, REG, 2, RSL,RSL },
285 { R_2(0x5a3), "concmpi", I_BASE, REG, 2, RSL,RSL },
286 { R_3(0x5a4), "cmpinco", I_BASE, REG, 3, RSL,RSL,RS },
287 { R_3(0x5a5), "cmpinci", I_BASE, REG, 3, RSL,RSL,RS },
288 { R_3(0x5a6), "cmpdeco", I_BASE, REG, 3, RSL,RSL,RS },
289 { R_3(0x5a7), "cmpdeci", I_BASE, REG, 3, RSL,RSL,RS },
290 { R_2(0x5ac), "scanbyte", I_BASE, REG, 2, RSL,RSL },
291 { R_2(0x5ae), "chkbit", I_BASE, REG, 2, RSL,RSL },
292 { R_3(0x5b0), "addc", I_BASE, REG, 3, RSL,RSL,RS },
293 { R_3(0x5b2), "subc", I_BASE, REG, 3, RSL,RSL,RS },
294 { R_2D(0x5cc), "mov", I_BASE, REG, 2, RSL,RS },
295 { R_2D(0x5dc), "movl", I_BASE, REG, 2, RL2,R2 },
296 { R_2D(0x5ec), "movt", I_BASE, REG, 2, RL4,R4 },
297 { R_2D(0x5fc), "movq", I_BASE, REG, 2, RL4,R4 },
298 { R_3(0x610), "atmod", I_BASE, REG, 3, RS, RSL,R },
299 { R_3(0x612), "atadd", I_BASE, REG, 3, RS, RSL,RS },
300 { R_2D(0x640), "spanbit", I_BASE, REG, 2, RSL,RS },
301 { R_2D(0x641), "scanbit", I_BASE, REG, 2, RSL,RS },
302 { R_3(0x645), "modac", I_BASE, REG, 3, RSL,RSL,RS },
303 { R_3(0x650), "modify", I_BASE, REG, 3, RSL,RSL,R },
304 { R_3(0x651), "extract", I_BASE, REG, 3, RSL,RSL,R },
305 { R_3(0x654), "modtc", I_BASE, REG, 3, RSL,RSL,RS },
306 { R_3(0x655), "modpc", I_BASE, REG, 3, RSL,RSL,R },
307 { R_1(0x660), "calls", I_BASE, REG, 1, RSL },
308 { R_0(0x66b), "mark", I_BASE, REG, 0, },
309 { R_0(0x66c), "fmark", I_BASE, REG, 0, },
310 { R_0(0x66d), "flushreg", I_BASE, REG, 0, },
311 { R_0(0x66f), "syncf", I_BASE, REG, 0, },
312 { R_3(0x670), "emul", I_BASE, REG, 3, RSL,RSL,R2 },
313 { R_3(0x671), "ediv", I_BASE, REG, 3, RSL,RL2,RS },
314 { R_2D(0x672), "cvtadr", I_CASIM,REG, 2, RL, R2 },
315 { R_3(0x701), "mulo", I_BASE, REG, 3, RSL,RSL,RS },
316 { R_3(0x708), "remo", I_BASE, REG, 3, RSL,RSL,RS },
317 { R_3(0x70b), "divo", I_BASE, REG, 3, RSL,RSL,RS },
318 { R_3(0x741), "muli", I_BASE, REG, 3, RSL,RSL,RS },
319 { R_3(0x748), "remi", I_BASE, REG, 3, RSL,RSL,RS },
320 { R_3(0x749), "modi", I_BASE, REG, 3, RSL,RSL,RS },
321 { R_3(0x74b), "divi", I_BASE, REG, 3, RSL,RSL,RS },
323 /* Floating-point instructions */
325 { R_2D(0x674), "cvtir", I_FP, REG, 2, RL, F },
326 { R_2D(0x675), "cvtilr", I_FP, REG, 2, RL, F },
327 { R_3(0x676), "scalerl", I_FP, REG, 3, RL, FL2,F2 },
328 { R_3(0x677), "scaler", I_FP, REG, 3, RL, FL, F },
329 { R_3(0x680), "atanr", I_FP, REG, 3, FL, FL, F },
330 { R_3(0x681), "logepr", I_FP, REG, 3, FL, FL, F },
331 { R_3(0x682), "logr", I_FP, REG, 3, FL, FL, F },
332 { R_3(0x683), "remr", I_FP, REG, 3, FL, FL, F },
333 { R_2(0x684), "cmpor", I_FP, REG, 2, FL, FL },
334 { R_2(0x685), "cmpr", I_FP, REG, 2, FL, FL },
335 { R_2D(0x688), "sqrtr", I_FP, REG, 2, FL, F },
336 { R_2D(0x689), "expr", I_FP, REG, 2, FL, F },
337 { R_2D(0x68a), "logbnr", I_FP, REG, 2, FL, F },
338 { R_2D(0x68b), "roundr", I_FP, REG, 2, FL, F },
339 { R_2D(0x68c), "sinr", I_FP, REG, 2, FL, F },
340 { R_2D(0x68d), "cosr", I_FP, REG, 2, FL, F },
341 { R_2D(0x68e), "tanr", I_FP, REG, 2, FL, F },
342 { R_1(0x68f), "classr", I_FP, REG, 1, FL },
343 { R_3(0x690), "atanrl", I_FP, REG, 3, FL2,FL2,F2 },
344 { R_3(0x691), "logeprl", I_FP, REG, 3, FL2,FL2,F2 },
345 { R_3(0x692), "logrl", I_FP, REG, 3, FL2,FL2,F2 },
346 { R_3(0x693), "remrl", I_FP, REG, 3, FL2,FL2,F2 },
347 { R_2(0x694), "cmporl", I_FP, REG, 2, FL2,FL2 },
348 { R_2(0x695), "cmprl", I_FP, REG, 2, FL2,FL2 },
349 { R_2D(0x698), "sqrtrl", I_FP, REG, 2, FL2,F2 },
350 { R_2D(0x699), "exprl", I_FP, REG, 2, FL2,F2 },
351 { R_2D(0x69a), "logbnrl", I_FP, REG, 2, FL2,F2 },
352 { R_2D(0x69b), "roundrl", I_FP, REG, 2, FL2,F2 },
353 { R_2D(0x69c), "sinrl", I_FP, REG, 2, FL2,F2 },
354 { R_2D(0x69d), "cosrl", I_FP, REG, 2, FL2,F2 },
355 { R_2D(0x69e), "tanrl", I_FP, REG, 2, FL2,F2 },
356 { R_1(0x69f), "classrl", I_FP, REG, 1, FL2 },
357 { R_2D(0x6c0), "cvtri", I_FP, REG, 2, FL, R },
358 { R_2D(0x6c1), "cvtril", I_FP, REG, 2, FL, R2 },
359 { R_2D(0x6c2), "cvtzri", I_FP, REG, 2, FL, R },
360 { R_2D(0x6c3), "cvtzril", I_FP, REG, 2, FL, R2 },
361 { R_2D(0x6c9), "movr", I_FP, REG, 2, FL, F },
362 { R_2D(0x6d9), "movrl", I_FP, REG, 2, FL2,F2 },
363 { R_2D(0x6e1), "movre", I_FP, REG, 2, FL4,F4 },
364 { R_3(0x6e2), "cpysre", I_FP, REG, 3, FL4,FL4,F4 },
365 { R_3(0x6e3), "cpyrsre", I_FP, REG, 3, FL4,FL4,F4 },
366 { R_3(0x78b), "divr", I_FP, REG, 3, FL, FL, F },
367 { R_3(0x78c), "mulr", I_FP, REG, 3, FL, FL, F },
368 { R_3(0x78d), "subr", I_FP, REG, 3, FL, FL, F },
369 { R_3(0x78f), "addr", I_FP, REG, 3, FL, FL, F },
370 { R_3(0x79b), "divrl", I_FP, REG, 3, FL2,FL2,F2 },
371 { R_3(0x79c), "mulrl", I_FP, REG, 3, FL2,FL2,F2 },
372 { R_3(0x79d), "subrl", I_FP, REG, 3, FL2,FL2,F2 },
373 { R_3(0x79f), "addrl", I_FP, REG, 3, FL2,FL2,F2 },
375 /* These are the floating point branch instructions. Each actually
376 * generates 2 branch instructions: the first a CTRL instruction with
377 * the indicated opcode, and the second a 'bno'.
380 { 0x12000000, "brue", I_FP, FBRA, 1 },
381 { 0x11000000, "brug", I_FP, FBRA, 1 },
382 { 0x13000000, "bruge", I_FP, FBRA, 1 },
383 { 0x14000000, "brul", I_FP, FBRA, 1 },
384 { 0x16000000, "brule", I_FP, FBRA, 1 },
385 { 0x15000000, "brulg", I_FP, FBRA, 1 },
388 /* Decimal instructions */
390 { R_3(0x642), "daddc", I_DEC, REG, 3, RSL,RSL,RS },
391 { R_3(0x643), "dsubc", I_DEC, REG, 3, RSL,RSL,RS },
392 { R_2D(0x644), "dmovt", I_DEC, REG, 2, RSL,RS },
397 { R_2(0x600), "synmov", I_KX, REG, 2, R, R },
398 { R_2(0x601), "synmovl", I_KX, REG, 2, R, R },
399 { R_2(0x602), "synmovq", I_KX, REG, 2, R, R },
400 { R_2D(0x615), "synld", I_KX, REG, 2, R, R },
405 { R_3(0x603), "cmpstr", I_MIL, REG, 3, R, R, RL },
406 { R_3(0x604), "movqstr", I_MIL, REG, 3, R, R, RL },
407 { R_3(0x605), "movstr", I_MIL, REG, 3, R, R, RL },
408 { R_2D(0x613), "inspacc", I_MIL, REG, 2, R, R },
409 { R_2D(0x614), "ldphy", I_MIL, REG, 2, R, R },
410 { R_3(0x617), "fill", I_MIL, REG, 3, R, RL, RL },
411 { R_2D(0x646), "condrec", I_MIL, REG, 2, R, R },
412 { R_2D(0x656), "receive", I_MIL, REG, 2, R, R },
413 { R_3(0x662), "send", I_MIL, REG, 3, R, RL, R },
414 { R_1(0x663), "sendserv", I_MIL, REG, 1, R },
415 { R_1(0x664), "resumprcs", I_MIL, REG, 1, R },
416 { R_1(0x665), "schedprcs", I_MIL, REG, 1, R },
417 { R_0(0x666), "saveprcs", I_MIL, REG, 0, },
418 { R_1(0x668), "condwait", I_MIL, REG, 1, R },
419 { R_1(0x669), "wait", I_MIL, REG, 1, R },
420 { R_1(0x66a), "signal", I_MIL, REG, 1, R },
421 { R_1D(0x673), "ldtime", I_MIL, REG, 1, R2 },
426 { R_3(0x5d8), "eshro", I_CX, REG, 3, RSL,RSL,RS },
427 { R_3(0x630), "sdma", I_CX, REG, 3, RSL,RSL,RL },
428 { R_3(0x631), "udma", I_CX, REG, 0 },
429 { R_3(0x659), "sysctl", I_CX, REG, 3, RSL,RSL,RL },
437 /* end of i960-opcode.h */