4 * Copyright (c) 2009 The DragonFly Project. All rights reserved.
6 * This code is derived from software contributed to The DragonFly Project
7 * by Matthew Dillon <dillon@backplane.com>
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in
17 * the documentation and/or other materials provided with the
19 * 3. Neither the name of The DragonFly Project nor the names of its
20 * contributors may be used to endorse or promote products derived
21 * from this software without specific, prior written permission.
23 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
24 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
25 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
26 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
27 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
28 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
29 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
30 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
31 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
33 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
37 * Copyright (c) 2007 David Gwynne <dlg@openbsd.org>
39 * Permission to use, copy, modify, and distribute this software for any
40 * purpose with or without fee is hereby granted, provided that the above
41 * copyright notice and this permission notice appear in all copies.
43 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
44 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
45 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
46 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
47 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
48 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
49 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
51 * $OpenBSD: atascsi.c,v 1.64 2009/02/16 21:19:06 miod Exp $
54 * Implement each SATA port as its own SCSI bus on CAM. This way we can
55 * implement future port multiplier features as individual devices on the
58 * Much of the cdb<->xa conversion code was taken from OpenBSD, the rest
59 * was written natively for DragonFly.
61 * NOTE-1: I was temporarily unlocking the port while making the CCB
62 * callback, to reduce the chance of a deadlock and to improve
63 * performance by allowing new commands to be queued.
65 * However, this also creates an opening where another AHCI
66 * interrupt can come in and execute the ahci_port_intr()
67 * function, creating a huge mess in the sequencing of the
70 * So for now we don't do this. XXX
75 static void ahci_xpt_action(struct cam_sim *sim, union ccb *ccb);
76 static void ahci_xpt_poll(struct cam_sim *sim);
77 static void ahci_xpt_scsi_disk_io(struct ahci_port *ap,
78 struct ata_port *at, union ccb *ccb);
79 static void ahci_xpt_scsi_atapi_io(struct ahci_port *ap,
80 struct ata_port *at, union ccb *ccb);
81 static void ahci_xpt_page_inquiry(struct ahci_port *ap,
82 struct ata_port *at, union ccb *ccb);
84 static void ahci_ata_complete_disk_rw(struct ata_xfer *xa);
85 static void ahci_ata_complete_disk_synchronize_cache(struct ata_xfer *xa);
86 static void ahci_atapi_complete_cmd(struct ata_xfer *xa);
87 static void ahci_ata_dummy_sense(struct scsi_sense_data *sense_data);
88 static void ahci_ata_atapi_sense(struct ata_fis_d2h *rfis,
89 struct scsi_sense_data *sense_data);
91 static int ahci_cam_probe_disk(struct ahci_port *ap, struct ata_port *at);
92 static int ahci_cam_probe_atapi(struct ahci_port *ap, struct ata_port *at);
93 static int ahci_set_xfer(struct ahci_port *ap, struct ata_port *atx);
94 static void ahci_ata_dummy_done(struct ata_xfer *xa);
95 static void ata_fix_identify(struct ata_identify *id);
96 static void ahci_cam_rescan(struct ahci_port *ap);
97 static void ahci_strip_string(const char **basep, int *lenp);
100 ahci_cam_attach(struct ahci_port *ap)
102 struct cam_devq *devq;
108 * We want at least one ccb to be available for error processing
109 * so don't let CAM use more then ncmds - 1.
111 unit = device_get_unit(ap->ap_sc->sc_dev);
112 if (ap->ap_sc->sc_ncmds > 1)
113 devq = cam_simq_alloc(ap->ap_sc->sc_ncmds - 1);
115 devq = cam_simq_alloc(ap->ap_sc->sc_ncmds);
121 * Give the devq enough room to run with 32 max_dev_transactions,
122 * but set the overall max tags to 1 until NCQ is negotiated.
124 sim = cam_sim_alloc(ahci_xpt_action, ahci_xpt_poll, "ahci",
125 (void *)ap, unit, &ap->ap_sim_lock,
127 cam_simq_release(devq);
132 ahci_os_unlock_port(ap);
133 lockmgr(&ap->ap_sim_lock, LK_EXCLUSIVE);
134 error = xpt_bus_register(ap->ap_sim, ap->ap_num);
135 lockmgr(&ap->ap_sim_lock, LK_RELEASE);
136 ahci_os_lock_port(ap);
137 if (error != CAM_SUCCESS) {
141 ap->ap_flags |= AP_F_BUS_REGISTERED;
143 if (ap->ap_probe == ATA_PROBE_NEED_IDENT)
144 error = ahci_cam_probe(ap, NULL);
151 ap->ap_flags |= AP_F_CAM_ATTACHED;
157 * The state of the port has changed.
159 * If atx is NULL the physical port has changed state.
160 * If atx is non-NULL a particular target behind a PM has changed state.
162 * If found is -1 the target state must be queued to a non-interrupt context.
163 * (only works with at == NULL).
165 * If found is 0 the target was removed.
166 * If found is 1 the target was inserted.
169 ahci_cam_changed(struct ahci_port *ap, struct ata_port *atx, int found)
171 struct cam_path *tmppath;
175 target = atx ? atx->at_target : CAM_TARGET_WILDCARD;
177 if (ap->ap_sim == NULL)
179 if (found == CAM_TARGET_WILDCARD) {
180 status = xpt_create_path(&tmppath, NULL,
181 cam_sim_path(ap->ap_sim),
182 target, CAM_LUN_WILDCARD);
183 if (status != CAM_REQ_CMP)
187 status = xpt_create_path(&tmppath, NULL,
188 cam_sim_path(ap->ap_sim),
191 if (status != CAM_REQ_CMP)
198 xpt_async(AC_FOUND_DEVICE, tmppath, NULL);
200 xpt_async(AC_LOST_DEVICE, tmppath, NULL);
203 xpt_free_path(tmppath);
207 ahci_cam_detach(struct ahci_port *ap)
211 if ((ap->ap_flags & AP_F_CAM_ATTACHED) == 0)
213 lockmgr(&ap->ap_sim_lock, LK_EXCLUSIVE);
215 xpt_freeze_simq(ap->ap_sim, 1);
217 if (ap->ap_flags & AP_F_BUS_REGISTERED) {
218 error = xpt_bus_deregister(cam_sim_path(ap->ap_sim));
219 KKASSERT(error == CAM_REQ_CMP);
220 ap->ap_flags &= ~AP_F_BUS_REGISTERED;
223 cam_sim_free(ap->ap_sim);
226 lockmgr(&ap->ap_sim_lock, LK_RELEASE);
227 ap->ap_flags &= ~AP_F_CAM_ATTACHED;
231 * Once the AHCI port has been attached we need to probe for a device or
232 * devices on the port and setup various options.
234 * If at is NULL we are probing the direct-attached device on the port,
235 * which may or may not be a port multiplier.
238 ahci_cam_probe(struct ahci_port *ap, struct ata_port *atx)
243 u_int64_t capacity_bytes;
250 const char *model_id;
251 const char *firmware_id;
252 const char *serial_id;
261 * Delayed CAM attachment for initial probe, sim may be NULL
263 if (ap->ap_sim == NULL)
267 * A NULL atx indicates a probe of the directly connected device.
268 * A non-NULL atx indicates a device connected via a port multiplier.
269 * We need to preserve atx for calls to ahci_ata_get_xfer().
271 * at is always non-NULL. For directly connected devices we supply
272 * an (at) pointing to target 0.
275 at = ap->ap_ata[0]; /* direct attached - device 0 */
276 if (ap->ap_type == ATA_PORT_T_PM) {
277 kprintf("%s: Found Port Multiplier\n",
281 at->at_type = ap->ap_type;
284 if (atx->at_type == ATA_PORT_T_PM) {
285 kprintf("%s: Bogus device, reducing port count to %d\n",
286 ATANAME(ap, atx), atx->at_target);
287 if (ap->ap_pmcount > atx->at_target)
288 ap->ap_pmcount = atx->at_target;
292 if (ap->ap_type == ATA_PORT_T_NONE)
294 if (at->at_type == ATA_PORT_T_NONE)
298 * Issue identify, saving the result
300 xa = ahci_ata_get_xfer(ap, atx);
301 xa->complete = ahci_ata_dummy_done;
302 xa->data = &at->at_identify;
303 xa->datalen = sizeof(at->at_identify);
304 xa->flags = ATA_F_READ | ATA_F_PIO | ATA_F_POLL;
305 xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target;
307 switch(at->at_type) {
308 case ATA_PORT_T_DISK:
309 xa->fis->command = ATA_C_IDENTIFY;
312 case ATA_PORT_T_ATAPI:
313 xa->fis->command = ATA_C_ATAPI_IDENTIFY;
314 xa->flags |= ATA_F_AUTOSENSE;
318 xa->fis->command = ATA_C_ATAPI_IDENTIFY;
319 type = "UNKNOWN(ATAPI?)";
322 xa->fis->features = 0;
326 if (ahci_ata_cmd(xa) != ATA_S_COMPLETE) {
327 kprintf("%s: Detected %s device but unable to IDENTIFY\n",
328 ATANAME(ap, atx), type);
329 ahci_ata_put_xfer(xa);
332 ahci_ata_put_xfer(xa);
334 ata_fix_identify(&at->at_identify);
337 * Read capacity using SATA probe info.
339 if (le16toh(at->at_identify.cmdset83) & 0x0400) {
340 /* LBA48 feature set supported */
342 for (i = 3; i >= 0; --i) {
345 le16toh(at->at_identify.addrsecxt[i]);
348 capacity = le16toh(at->at_identify.addrsec[1]);
350 capacity += le16toh(at->at_identify.addrsec[0]);
353 capacity = 1024 * 1024 / 512;
354 at->at_capacity = capacity;
356 ap->ap_probe = ATA_PROBE_GOOD;
358 capacity_bytes = capacity * 512;
361 * Negotiate NCQ, throw away any ata_xfer's beyond the negotiated
362 * number of slots and limit the number of CAM ccb's to one less
363 * so we always have a slot available for recovery.
365 * NCQ is not used if ap_ncqdepth is 1 or the host controller does
366 * not support it, and in that case the driver can handle extra
369 * NCQ is currently used only with direct-attached disks. It is
370 * not used with port multipliers or direct-attached ATAPI devices.
372 * Remember at least one extra CCB needs to be reserved for the
375 if ((ap->ap_sc->sc_cap & AHCI_REG_CAP_SNCQ) &&
376 ap->ap_type == ATA_PORT_T_DISK &&
377 (le16toh(at->at_identify.satacap) & (1 << 8))) {
378 at->at_ncqdepth = (le16toh(at->at_identify.qdepth) & 0x1F) + 1;
379 devncqdepth = at->at_ncqdepth;
380 if (at->at_ncqdepth > ap->ap_sc->sc_ncmds)
381 at->at_ncqdepth = ap->ap_sc->sc_ncmds;
382 if (at->at_ncqdepth > 1) {
383 for (i = 0; i < ap->ap_sc->sc_ncmds; ++i) {
384 xa = ahci_ata_get_xfer(ap, atx);
385 if (xa->tag < at->at_ncqdepth) {
386 xa->state = ATA_S_COMPLETE;
387 ahci_ata_put_xfer(xa);
390 if (at->at_ncqdepth >= ap->ap_sc->sc_ncmds) {
391 cam_sim_set_max_tags(ap->ap_sim,
392 at->at_ncqdepth - 1);
399 model_len = sizeof(at->at_identify.model);
400 model_id = at->at_identify.model;
401 ahci_strip_string(&model_id, &model_len);
403 firmware_len = sizeof(at->at_identify.firmware);
404 firmware_id = at->at_identify.firmware;
405 ahci_strip_string(&firmware_id, &firmware_len);
407 serial_len = sizeof(at->at_identify.serial);
408 serial_id = at->at_identify.serial;
409 ahci_strip_string(&serial_id, &serial_len);
412 * Generate informatiive strings.
414 * NOTE: We do not automatically set write caching, lookahead,
415 * or the security state for ATAPI devices.
417 if (at->at_identify.cmdset82 & ATA_IDENTIFY_WRITECACHE) {
418 if (at->at_identify.features85 & ATA_IDENTIFY_WRITECACHE)
420 else if (at->at_type == ATA_PORT_T_ATAPI)
428 if (at->at_identify.cmdset82 & ATA_IDENTIFY_LOOKAHEAD) {
429 if (at->at_identify.features85 & ATA_IDENTIFY_LOOKAHEAD)
431 else if (at->at_type == ATA_PORT_T_ATAPI)
439 if (at->at_identify.cmdset82 & ATA_IDENTIFY_SECURITY) {
440 if (at->at_identify.securestatus & ATA_SECURE_FROZEN)
442 else if (at->at_type == ATA_PORT_T_ATAPI)
444 else if (AhciNoFeatures & (1 << ap->ap_num))
445 scstr = "<disabled>";
452 kprintf("%s: Found %s \"%*.*s %*.*s\" serial=\"%*.*s\"\n"
453 "%s: tags=%d/%d satacap=%04x satafea=%04x NCQ=%s "
454 "capacity=%lld.%02dMB\n",
458 model_len, model_len, model_id,
459 firmware_len, firmware_len, firmware_id,
460 serial_len, serial_len, serial_id,
463 devncqdepth, ap->ap_sc->sc_ncmds,
464 at->at_identify.satacap,
465 at->at_identify.satafsup,
466 (at->at_ncqdepth > 1 ? "YES" : "NO"),
467 (long long)capacity_bytes / (1024 * 1024),
468 (int)(capacity_bytes % (1024 * 1024)) * 100 / (1024 * 1024)
470 kprintf("%s: f85=%04x f86=%04x f87=%04x WC=%s RA=%s SEC=%s\n",
472 at->at_identify.features85,
473 at->at_identify.features86,
474 at->at_identify.features87,
481 * Additional type-specific probing
483 switch(at->at_type) {
484 case ATA_PORT_T_DISK:
485 error = ahci_cam_probe_disk(ap, atx);
487 case ATA_PORT_T_ATAPI:
488 error = ahci_cam_probe_atapi(ap, atx);
496 at->at_probe = ATA_PROBE_FAILED;
498 ap->ap_probe = at->at_probe;
500 at->at_probe = ATA_PROBE_GOOD;
502 ap->ap_probe = at->at_probe;
508 * DISK-specific probe after initial ident
511 ahci_cam_probe_disk(struct ahci_port *ap, struct ata_port *atx)
516 at = atx ? atx : ap->ap_ata[0];
519 * Set dummy xfer mode
521 ahci_set_xfer(ap, atx);
524 * Enable write cache if supported
526 * NOTE: "WD My Book" external disk devices have a very poor
527 * daughter board between the the ESATA and the HD. Sending
528 * any ATA_C_SET_FEATURES commands will break the hardware port
529 * with a fatal protocol error. However, this device also
530 * indicates that WRITECACHE is already on and READAHEAD is
531 * not supported so we avoid the issue.
533 if ((at->at_identify.cmdset82 & ATA_IDENTIFY_WRITECACHE) &&
534 (at->at_identify.features85 & ATA_IDENTIFY_WRITECACHE) == 0) {
535 xa = ahci_ata_get_xfer(ap, atx);
536 xa->complete = ahci_ata_dummy_done;
537 xa->fis->command = ATA_C_SET_FEATURES;
538 xa->fis->features = ATA_SF_WRITECACHE_EN;
539 /* xa->fis->features = ATA_SF_LOOKAHEAD_EN; */
540 xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target;
542 xa->flags = ATA_F_PIO | ATA_F_POLL;
545 if (ahci_ata_cmd(xa) == ATA_S_COMPLETE)
546 at->at_features |= ATA_PORT_F_WCACHE;
548 kprintf("%s: Unable to enable write-caching\n",
550 ahci_ata_put_xfer(xa);
554 * Enable readahead if supported
556 if ((at->at_identify.cmdset82 & ATA_IDENTIFY_LOOKAHEAD) &&
557 (at->at_identify.features85 & ATA_IDENTIFY_LOOKAHEAD) == 0) {
558 xa = ahci_ata_get_xfer(ap, atx);
559 xa->complete = ahci_ata_dummy_done;
560 xa->fis->command = ATA_C_SET_FEATURES;
561 xa->fis->features = ATA_SF_LOOKAHEAD_EN;
562 xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target;
564 xa->flags = ATA_F_PIO | ATA_F_POLL;
567 if (ahci_ata_cmd(xa) == ATA_S_COMPLETE)
568 at->at_features |= ATA_PORT_F_RAHEAD;
570 kprintf("%s: Unable to enable read-ahead\n",
572 ahci_ata_put_xfer(xa);
576 * FREEZE LOCK the device so malicious users can't lock it on us.
577 * As there is no harm in issuing this to devices that don't
578 * support the security feature set we just send it, and don't bother
579 * checking if the device sends a command abort to tell us it doesn't
582 if ((at->at_identify.cmdset82 & ATA_IDENTIFY_SECURITY) &&
583 (at->at_identify.securestatus & ATA_SECURE_FROZEN) == 0 &&
584 (AhciNoFeatures & (1 << ap->ap_num)) == 0) {
585 xa = ahci_ata_get_xfer(ap, atx);
586 xa->complete = ahci_ata_dummy_done;
587 xa->fis->command = ATA_C_SEC_FREEZE_LOCK;
588 xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target;
589 xa->flags = ATA_F_PIO | ATA_F_POLL;
592 if (ahci_ata_cmd(xa) == ATA_S_COMPLETE)
593 at->at_features |= ATA_PORT_F_FRZLCK;
595 kprintf("%s: Unable to set security freeze\n",
597 ahci_ata_put_xfer(xa);
604 * ATAPI-specific probe after initial ident
607 ahci_cam_probe_atapi(struct ahci_port *ap, struct ata_port *atx)
609 ahci_set_xfer(ap, atx);
614 * Setting the transfer mode is irrelevant for the SATA transport
615 * but some (atapi) devices seem to need it anyway. In addition
616 * if we are running through a SATA->PATA converter for some reason
617 * beyond my comprehension we might have to set the mode.
619 * We only support DMA modes for SATA attached devices, so don't bother
623 ahci_set_xfer(struct ahci_port *ap, struct ata_port *atx)
630 at = atx ? atx : ap->ap_ata[0];
633 * Figure out the supported UDMA mode. Ignore other legacy modes.
635 mask = le16toh(at->at_identify.ultradma);
636 if ((mask & 0xFF) == 0 || mask == 0xFFFF)
640 while ((mask & 0x8000) == 0) {
646 * SATA atapi devices often still report a dma mode, even though
647 * it is irrelevant for SATA transport. It is also possible that
648 * we are running through a SATA->PATA converter and seeing the
651 * In this case the device may require a (dummy) SETXFER to be
652 * sent before it will work properly.
654 xa = ahci_ata_get_xfer(ap, atx);
655 xa->complete = ahci_ata_dummy_done;
656 xa->fis->command = ATA_C_SET_FEATURES;
657 xa->fis->features = ATA_SF_SETXFER;
658 xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target;
659 xa->fis->sector_count = mode;
660 xa->flags = ATA_F_PIO | ATA_F_POLL;
663 if (ahci_ata_cmd(xa) != ATA_S_COMPLETE) {
664 kprintf("%s: Unable to set dummy xfer mode \n",
666 } else if (bootverbose) {
667 kprintf("%s: Set dummy xfer mode to %02x\n",
668 ATANAME(ap, atx), mode);
670 ahci_ata_put_xfer(xa);
675 * Fix byte ordering so buffers can be accessed as
679 ata_fix_identify(struct ata_identify *id)
684 swap = (u_int16_t *)id->serial;
685 for (i = 0; i < sizeof(id->serial) / sizeof(u_int16_t); i++)
686 swap[i] = bswap16(swap[i]);
688 swap = (u_int16_t *)id->firmware;
689 for (i = 0; i < sizeof(id->firmware) / sizeof(u_int16_t); i++)
690 swap[i] = bswap16(swap[i]);
692 swap = (u_int16_t *)id->model;
693 for (i = 0; i < sizeof(id->model) / sizeof(u_int16_t); i++)
694 swap[i] = bswap16(swap[i]);
698 * Dummy done callback for xa.
701 ahci_ata_dummy_done(struct ata_xfer *xa)
706 * Use an engineering request to initiate a target scan for devices
707 * behind a port multiplier.
709 * An asynchronous bus scan is used to avoid reentrancy issues.
712 ahci_cam_rescan_callback(struct cam_periph *periph, union ccb *ccb)
714 struct ahci_port *ap = ccb->ccb_h.sim_priv.entries[0].ptr;
716 if (ccb->ccb_h.func_code == XPT_SCAN_BUS) {
717 ap->ap_flags &= ~AP_F_SCAN_RUNNING;
718 if (ap->ap_flags & AP_F_SCAN_REQUESTED) {
719 ap->ap_flags &= ~AP_F_SCAN_REQUESTED;
722 ap->ap_flags |= AP_F_SCAN_COMPLETED;
723 wakeup(&ap->ap_flags);
729 ahci_cam_rescan(struct ahci_port *ap)
731 struct cam_path *path;
736 if (ap->ap_flags & AP_F_SCAN_RUNNING) {
737 ap->ap_flags |= AP_F_SCAN_REQUESTED;
740 ap->ap_flags |= AP_F_SCAN_RUNNING;
741 for (i = 0; i < AHCI_MAX_PMPORTS; ++i) {
742 ap->ap_ata[i]->at_features |= ATA_PORT_F_RESCAN;
745 status = xpt_create_path(&path, xpt_periph, cam_sim_path(ap->ap_sim),
746 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
747 if (status != CAM_REQ_CMP)
750 ccb = xpt_alloc_ccb();
751 xpt_setup_ccb(&ccb->ccb_h, path, 5); /* 5 = low priority */
752 ccb->ccb_h.func_code = XPT_ENG_EXEC;
753 ccb->ccb_h.cbfcnp = ahci_cam_rescan_callback;
754 ccb->ccb_h.sim_priv.entries[0].ptr = ap;
755 ccb->crcn.flags = CAM_FLAG_NONE;
756 xpt_action_async(ccb);
760 ahci_xpt_rescan(struct ahci_port *ap)
762 struct cam_path *path;
766 status = xpt_create_path(&path, xpt_periph, cam_sim_path(ap->ap_sim),
767 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
768 if (status != CAM_REQ_CMP)
771 ccb = xpt_alloc_ccb();
772 xpt_setup_ccb(&ccb->ccb_h, path, 5); /* 5 = low priority */
773 ccb->ccb_h.func_code = XPT_SCAN_BUS;
774 ccb->ccb_h.cbfcnp = ahci_cam_rescan_callback;
775 ccb->ccb_h.sim_priv.entries[0].ptr = ap;
776 ccb->crcn.flags = CAM_FLAG_NONE;
777 xpt_action_async(ccb);
781 * Action function - dispatch command
785 ahci_xpt_action(struct cam_sim *sim, union ccb *ccb)
787 struct ahci_port *ap;
788 struct ata_port *at, *atx;
789 struct ccb_hdr *ccbh;
793 ap = cam_sim_softc(sim);
795 KKASSERT(ap != NULL);
797 unit = cam_sim_unit(sim);
800 * Early failure checks. These checks do not apply to XPT_PATH_INQ,
801 * otherwise the bus rescan will not remove the dead devices when
804 * For non-wildcards we have one target (0) and one lun (0),
805 * unless we have a port multiplier.
807 * A wildcard target indicates only the general bus is being
810 * Calculate at and atx. at is always non-NULL. atx is only
811 * NULL for direct-attached devices. It will be non-NULL for
812 * devices behind a port multiplier.
814 * XXX What do we do with a LUN wildcard?
816 if (ccbh->target_id != CAM_TARGET_WILDCARD &&
817 ccbh->func_code != XPT_PATH_INQ) {
818 if (ap->ap_type == ATA_PORT_T_NONE) {
819 ccbh->status = CAM_DEV_NOT_THERE;
823 if (ccbh->target_id < 0 || ccbh->target_id >= ap->ap_pmcount) {
824 ccbh->status = CAM_DEV_NOT_THERE;
828 at = ap->ap_ata[ccbh->target_id];
829 if (ap->ap_type == ATA_PORT_T_PM)
832 if (ccbh->target_lun != CAM_LUN_WILDCARD && ccbh->target_lun) {
833 ccbh->status = CAM_DEV_NOT_THERE;
842 * Switch on the meta XPT command
844 switch(ccbh->func_code) {
847 * This routine is called after a port multiplier has been
850 ccbh->status = CAM_REQ_CMP;
851 ahci_os_lock_port(ap);
852 ahci_port_state_machine(ap, 0);
853 ahci_os_unlock_port(ap);
859 * This command always succeeds, otherwise the bus scan
860 * will not detach dead devices.
862 ccb->cpi.version_num = 1;
863 ccb->cpi.hba_inquiry = 0;
864 ccb->cpi.target_sprt = 0;
865 ccb->cpi.hba_misc = PIM_SEQSCAN;
866 ccb->cpi.hba_eng_cnt = 0;
867 bzero(ccb->cpi.vuhba_flags, sizeof(ccb->cpi.vuhba_flags));
868 ccb->cpi.max_target = AHCI_MAX_PMPORTS - 1;
869 ccb->cpi.max_lun = 0;
870 ccb->cpi.async_flags = 0;
871 ccb->cpi.hpath_id = 0;
872 ccb->cpi.initiator_id = AHCI_MAX_PMPORTS - 1;
873 ccb->cpi.unit_number = cam_sim_unit(sim);
874 ccb->cpi.bus_id = cam_sim_bus(sim);
875 ccb->cpi.base_transfer_speed = 150000;
876 ccb->cpi.transport = XPORT_SATA;
877 ccb->cpi.transport_version = 1;
878 ccb->cpi.protocol = PROTO_SCSI;
879 ccb->cpi.protocol_version = SCSI_REV_2;
881 ccbh->status = CAM_REQ_CMP;
882 if (ccbh->target_id == CAM_TARGET_WILDCARD) {
883 ahci_os_lock_port(ap);
884 ahci_port_state_machine(ap, 0);
885 ahci_os_unlock_port(ap);
887 switch(ahci_pread(ap, AHCI_PREG_SSTS) &
888 AHCI_PREG_SSTS_SPD) {
889 case AHCI_PREG_SSTS_SPD_GEN1:
890 ccb->cpi.base_transfer_speed = 150000;
892 case AHCI_PREG_SSTS_SPD_GEN2:
893 ccb->cpi.base_transfer_speed = 300000;
895 case AHCI_PREG_SSTS_SPD_GEN3:
896 ccb->cpi.base_transfer_speed = 600000;
900 ccb->cpi.base_transfer_speed = 1000;
904 if (ap->ap_type == ATA_PORT_T_NONE)
905 ccbh->status = CAM_DEV_NOT_THERE;
911 ahci_os_lock_port(ap);
912 if (ap->ap_type == ATA_PORT_T_NONE) {
913 ccbh->status = CAM_DEV_NOT_THERE;
915 ahci_port_reset(ap, atx, 0);
916 ccbh->status = CAM_REQ_CMP;
918 ahci_os_unlock_port(ap);
922 ahci_os_lock_port(ap);
923 ahci_port_reset(ap, NULL, 1);
924 ahci_os_unlock_port(ap);
925 ccbh->status = CAM_REQ_CMP;
928 case XPT_SET_TRAN_SETTINGS:
929 ccbh->status = CAM_FUNC_NOTAVAIL;
932 case XPT_GET_TRAN_SETTINGS:
933 ccb->cts.protocol = PROTO_SCSI;
934 ccb->cts.protocol_version = SCSI_REV_2;
935 ccb->cts.transport = XPORT_SATA;
936 ccb->cts.transport_version = XPORT_VERSION_UNSPECIFIED;
937 ccb->cts.proto_specific.valid = 0;
938 ccb->cts.xport_specific.valid = 0;
939 ccbh->status = CAM_REQ_CMP;
942 case XPT_CALC_GEOMETRY:
943 cam_calc_geometry(&ccb->ccg, 1);
948 * Our parallel startup code might have only probed through
949 * to the IDENT, so do the last step if necessary.
951 if (at->at_probe == ATA_PROBE_NEED_IDENT)
952 ahci_cam_probe(ap, atx);
953 if (at->at_probe != ATA_PROBE_GOOD) {
954 ccbh->status = CAM_DEV_NOT_THERE;
958 switch(at->at_type) {
959 case ATA_PORT_T_DISK:
960 ahci_xpt_scsi_disk_io(ap, atx, ccb);
962 case ATA_PORT_T_ATAPI:
963 ahci_xpt_scsi_atapi_io(ap, atx, ccb);
966 ccbh->status = CAM_REQ_INVALID;
974 struct ccb_scsiio *csio;
976 cdb = (void *)((ccbh->flags & CAM_CDB_POINTER) ?
977 csio->cdb_io.cdb_ptr : csio->cdb_io.cdb_bytes);
978 cdb->generic.opcode = TRIM;
979 ahci_xpt_scsi_disk_io(ap, atx, ccb);
983 ccbh->status = CAM_REQ_INVALID;
992 * Generally this function gets called heavily when interrupts might be
993 * non-operational, during a halt/reboot or panic.
997 ahci_xpt_poll(struct cam_sim *sim)
999 struct ahci_port *ap;
1001 ap = cam_sim_softc(sim);
1003 ahci_os_lock_port(ap);
1004 ahci_port_intr(ap, 1);
1005 ahci_os_unlock_port(ap);
1010 * Convert the SCSI command in ccb to an ata_xfer command in xa
1011 * for ATA_PORT_T_DISK operations. Set the completion function
1012 * to convert the response back, then dispatch to the OpenBSD AHCI
1015 * AHCI DISK commands only support a limited command set, and we
1016 * fake additional commands to make it play nice with the CAM subsystem.
1020 ahci_xpt_scsi_disk_io(struct ahci_port *ap, struct ata_port *atx,
1023 struct ccb_hdr *ccbh;
1024 struct ccb_scsiio *csio;
1025 struct ata_xfer *xa;
1026 struct ata_port *at;
1027 struct ata_fis_h2d *fis;
1028 struct ata_pass_12 *atp12;
1029 struct ata_pass_16 *atp16;
1031 union scsi_data *rdata;
1037 ccbh = &ccb->csio.ccb_h;
1039 at = atx ? atx : ap->ap_ata[0];
1042 * XXX not passing NULL at for direct attach!
1044 xa = ahci_ata_get_xfer(ap, atx);
1045 rdata = (void *)csio->data_ptr;
1046 rdata_len = csio->dxfer_len;
1049 * Build the FIS or process the csio to completion.
1051 cdb = (void *)((ccbh->flags & CAM_CDB_POINTER) ?
1052 csio->cdb_io.cdb_ptr : csio->cdb_io.cdb_bytes);
1054 switch(cdb->generic.opcode) {
1057 * Auto-sense everything, so explicit sense requests
1060 ccbh->status = CAM_SCSI_STATUS_ERROR;
1064 * Inquiry supported features
1066 * [opcode, byte2, page_code, length, control]
1068 if (cdb->inquiry.byte2 & SI_EVPD) {
1069 ahci_xpt_page_inquiry(ap, at, ccb);
1071 bzero(rdata, rdata_len);
1072 if (rdata_len < SHORT_INQUIRY_LENGTH) {
1073 ccbh->status = CAM_CCB_LEN_ERR;
1076 if (rdata_len > sizeof(rdata->inquiry_data))
1077 rdata_len = sizeof(rdata->inquiry_data);
1078 rdata->inquiry_data.device = T_DIRECT;
1079 rdata->inquiry_data.version = SCSI_REV_SPC2;
1080 rdata->inquiry_data.response_format = 2;
1081 rdata->inquiry_data.additional_length = 32;
1082 bcopy("SATA ", rdata->inquiry_data.vendor, 8);
1083 bcopy(at->at_identify.model,
1084 rdata->inquiry_data.product,
1085 sizeof(rdata->inquiry_data.product));
1086 bcopy(at->at_identify.firmware,
1087 rdata->inquiry_data.revision,
1088 sizeof(rdata->inquiry_data.revision));
1089 ccbh->status = CAM_REQ_CMP;
1093 * Use the vendor specific area to set the TRIM status
1096 if (at->at_identify.support_dsm) {
1097 rdata->inquiry_data.vendor_specific1[0] =
1098 at->at_identify.support_dsm &ATA_SUPPORT_DSM_TRIM;
1099 rdata->inquiry_data.vendor_specific1[1] =
1100 at->at_identify.max_dsm_blocks;
1103 case READ_CAPACITY_16:
1104 if (cdb->read_capacity_16.service_action != SRC16_SERVICE_ACTION) {
1105 ccbh->status = CAM_REQ_INVALID;
1108 if (rdata_len < sizeof(rdata->read_capacity_data_16)) {
1109 ccbh->status = CAM_CCB_LEN_ERR;
1114 if (rdata_len < sizeof(rdata->read_capacity_data)) {
1115 ccbh->status = CAM_CCB_LEN_ERR;
1119 capacity = at->at_capacity;
1121 bzero(rdata, rdata_len);
1122 if (cdb->generic.opcode == READ_CAPACITY) {
1123 rdata_len = sizeof(rdata->read_capacity_data);
1124 if (capacity > 0xFFFFFFFFU) {
1126 * Set capacity to 0 so maxsector winds up
1127 * being 0xffffffff in CAM in order to trigger
1132 bzero(&rdata->read_capacity_data, rdata_len);
1133 scsi_ulto4b((u_int32_t)capacity - 1,
1134 rdata->read_capacity_data.addr);
1135 scsi_ulto4b(512, rdata->read_capacity_data.length);
1137 rdata_len = sizeof(rdata->read_capacity_data_16);
1138 bzero(&rdata->read_capacity_data_16, rdata_len);
1139 scsi_u64to8b(capacity - 1,
1140 rdata->read_capacity_data_16.addr);
1141 scsi_ulto4b(512, rdata->read_capacity_data_16.length);
1143 ccbh->status = CAM_REQ_CMP;
1145 case SYNCHRONIZE_CACHE:
1147 * Synchronize cache. Specification says this can take
1148 * greater then 30 seconds so give it at least 45.
1151 fis->flags = ATA_H2D_FLAGS_CMD;
1152 fis->command = ATA_C_FLUSH_CACHE;
1154 if (xa->timeout < 45000)
1155 xa->timeout = 45000;
1158 xa->complete = ahci_ata_complete_disk_synchronize_cache;
1162 fis->command = ATA_C_DATA_SET_MANAGEMENT;
1163 fis->features = (u_int8_t)ATA_SF_DSM_TRIM;
1164 fis->features_exp = (u_int8_t)(ATA_SF_DSM_TRIM>> 8);
1166 xa->flags = ATA_F_WRITE;
1167 fis->flags = ATA_H2D_FLAGS_CMD;
1169 xa->data = csio->data_ptr;
1170 xa->datalen = csio->dxfer_len;
1171 xa->timeout = ccbh->timeout*50; /* milliseconds */
1173 fis->sector_count =(u_int8_t)(xa->datalen/512);
1174 fis->sector_count_exp =(u_int8_t)((xa->datalen/512)>>8);
1177 fis->lba_low = (u_int8_t)lba;
1178 fis->lba_mid = (u_int8_t)(lba >> 8);
1179 fis->lba_high = (u_int8_t)(lba >> 16);
1180 fis->lba_low_exp = (u_int8_t)(lba >> 24);
1181 fis->lba_mid_exp = (u_int8_t)(lba >> 32);
1182 fis->lba_high_exp = (u_int8_t)(lba >> 40);
1184 fis->device = ATA_H2D_DEVICE_LBA;
1185 xa->data = csio->data_ptr;
1187 xa->complete = ahci_ata_complete_disk_rw;
1188 ccbh->status = CAM_REQ_INPROG;
1190 case TEST_UNIT_READY:
1191 case START_STOP_UNIT:
1194 * Just silently return success
1196 ccbh->status = CAM_REQ_CMP;
1200 atp12 = &cdb->ata_pass_12;
1203 * Figure out the flags to be used, depending on the direction of the
1206 switch (ccbh->flags & CAM_DIR_MASK) {
1208 xa->flags = ATA_F_READ;
1211 xa->flags = ATA_F_WRITE;
1216 xa->flags |= ATA_F_POLL | ATA_F_EXCLUSIVE;
1217 xa->data = csio->data_ptr;
1218 xa->datalen = csio->dxfer_len;
1219 xa->complete = ahci_ata_complete_disk_rw;
1220 xa->timeout = ccbh->timeout;
1223 * Populate the fis from the information we received through CAM
1226 fis->flags = ATA_H2D_FLAGS_CMD; /* maybe also atp12->flags ? */
1227 fis->features = atp12->features;
1228 fis->sector_count = atp12->sector_count;
1229 fis->lba_low = atp12->lba_low;
1230 fis->lba_mid = atp12->lba_mid;
1231 fis->lba_high = atp12->lba_high;
1232 fis->device = atp12->device; /* maybe always 0? */
1233 fis->command = atp12->command;
1234 fis->control = atp12->control;
1237 * Mark as in progress so it is sent to the device.
1239 ccbh->status = CAM_REQ_INPROG;
1242 atp16 = &cdb->ata_pass_16;
1245 * Figure out the flags to be used, depending on the direction of the
1248 switch (ccbh->flags & CAM_DIR_MASK) {
1250 xa->flags = ATA_F_READ;
1253 xa->flags = ATA_F_WRITE;
1258 xa->flags |= ATA_F_POLL | ATA_F_EXCLUSIVE;
1259 xa->data = csio->data_ptr;
1260 xa->datalen = csio->dxfer_len;
1261 xa->complete = ahci_ata_complete_disk_rw;
1262 xa->timeout = ccbh->timeout;
1265 * Populate the fis from the information we received through CAM
1268 fis->flags = ATA_H2D_FLAGS_CMD; /* maybe also atp16->flags ? */
1269 fis->features = atp16->features;
1270 fis->features_exp = atp16->features_ext;
1271 fis->sector_count = atp16->sector_count;
1272 fis->sector_count_exp = atp16->sector_count_ext;
1273 fis->lba_low = atp16->lba_low;
1274 fis->lba_low_exp = atp16->lba_low_ext;
1275 fis->lba_mid = atp16->lba_mid;
1276 fis->lba_mid_exp = atp16->lba_mid_ext;
1277 fis->lba_high = atp16->lba_high;
1278 fis->lba_mid_exp = atp16->lba_mid_ext;
1279 fis->device = atp16->device; /* maybe always 0? */
1280 fis->command = atp16->command;
1283 * Mark as in progress so it is sent to the device.
1285 ccbh->status = CAM_REQ_INPROG;
1288 switch(cdb->generic.opcode) {
1290 lba = scsi_3btoul(cdb->rw_6.addr) & 0x1FFFFF;
1291 count = cdb->rw_6.length ? cdb->rw_6.length : 0x100;
1292 xa->flags = ATA_F_READ;
1295 lba = scsi_4btoul(cdb->rw_10.addr);
1296 count = scsi_2btoul(cdb->rw_10.length);
1297 xa->flags = ATA_F_READ;
1300 lba = scsi_4btoul(cdb->rw_12.addr);
1301 count = scsi_4btoul(cdb->rw_12.length);
1302 xa->flags = ATA_F_READ;
1305 lba = scsi_8btou64(cdb->rw_16.addr);
1306 count = scsi_4btoul(cdb->rw_16.length);
1307 xa->flags = ATA_F_READ;
1310 lba = scsi_3btoul(cdb->rw_6.addr) & 0x1FFFFF;
1311 count = cdb->rw_6.length ? cdb->rw_6.length : 0x100;
1312 xa->flags = ATA_F_WRITE;
1315 lba = scsi_4btoul(cdb->rw_10.addr);
1316 count = scsi_2btoul(cdb->rw_10.length);
1317 xa->flags = ATA_F_WRITE;
1320 lba = scsi_4btoul(cdb->rw_12.addr);
1321 count = scsi_4btoul(cdb->rw_12.length);
1322 xa->flags = ATA_F_WRITE;
1325 lba = scsi_8btou64(cdb->rw_16.addr);
1326 count = scsi_4btoul(cdb->rw_16.length);
1327 xa->flags = ATA_F_WRITE;
1330 ccbh->status = CAM_REQ_INVALID;
1333 if (ccbh->status != CAM_REQ_INPROG)
1337 fis->flags = ATA_H2D_FLAGS_CMD;
1338 fis->lba_low = (u_int8_t)lba;
1339 fis->lba_mid = (u_int8_t)(lba >> 8);
1340 fis->lba_high = (u_int8_t)(lba >> 16);
1341 fis->device = ATA_H2D_DEVICE_LBA;
1344 * NCQ only for direct-attached disks, do not currently
1345 * try to use NCQ with port multipliers.
1347 if (at->at_ncqdepth > 1 &&
1348 ap->ap_type == ATA_PORT_T_DISK &&
1349 (ap->ap_sc->sc_cap & AHCI_REG_CAP_SNCQ) &&
1350 (ccbh->flags & CAM_POLLED) == 0) {
1352 * Use NCQ - always uses 48 bit addressing
1354 xa->flags |= ATA_F_NCQ;
1355 fis->command = (xa->flags & ATA_F_WRITE) ?
1356 ATA_C_WRITE_FPDMA : ATA_C_READ_FPDMA;
1357 fis->lba_low_exp = (u_int8_t)(lba >> 24);
1358 fis->lba_mid_exp = (u_int8_t)(lba >> 32);
1359 fis->lba_high_exp = (u_int8_t)(lba >> 40);
1360 fis->sector_count = xa->tag << 3;
1361 fis->features = (u_int8_t)count;
1362 fis->features_exp = (u_int8_t)(count >> 8);
1363 } else if (count > 0x100 || lba > 0x0FFFFFFFU) {
1367 fis->command = (xa->flags & ATA_F_WRITE) ?
1368 ATA_C_WRITEDMA_EXT : ATA_C_READDMA_EXT;
1369 fis->lba_low_exp = (u_int8_t)(lba >> 24);
1370 fis->lba_mid_exp = (u_int8_t)(lba >> 32);
1371 fis->lba_high_exp = (u_int8_t)(lba >> 40);
1372 fis->sector_count = (u_int8_t)count;
1373 fis->sector_count_exp = (u_int8_t)(count >> 8);
1378 * NOTE: 256 sectors is supported, stored as 0.
1380 fis->command = (xa->flags & ATA_F_WRITE) ?
1381 ATA_C_WRITEDMA : ATA_C_READDMA;
1382 fis->device |= (u_int8_t)(lba >> 24) & 0x0F;
1383 fis->sector_count = (u_int8_t)count;
1386 xa->data = csio->data_ptr;
1387 xa->datalen = csio->dxfer_len;
1388 xa->complete = ahci_ata_complete_disk_rw;
1389 xa->timeout = ccbh->timeout; /* milliseconds */
1391 if (xa->timeout > 10000) /* XXX - debug */
1392 xa->timeout = 10000;
1394 if (ccbh->flags & CAM_POLLED)
1395 xa->flags |= ATA_F_POLL;
1400 * If the request is still in progress the xa and FIS have
1401 * been set up (except for the PM target), and must be dispatched.
1402 * Otherwise the request was completed.
1404 if (ccbh->status == CAM_REQ_INPROG) {
1405 KKASSERT(xa->complete != NULL);
1406 xa->atascsi_private = ccb;
1407 ccb->ccb_h.sim_priv.entries[0].ptr = ap;
1408 ahci_os_lock_port(ap);
1409 xa->fis->flags |= at->at_target;
1411 ahci_os_unlock_port(ap);
1413 ahci_ata_put_xfer(xa);
1419 * Convert the SCSI command in ccb to an ata_xfer command in xa
1420 * for ATA_PORT_T_ATAPI operations. Set the completion function
1421 * to convert the response back, then dispatch to the OpenBSD AHCI
1426 ahci_xpt_scsi_atapi_io(struct ahci_port *ap, struct ata_port *atx,
1429 struct ccb_hdr *ccbh;
1430 struct ccb_scsiio *csio;
1431 struct ata_xfer *xa;
1432 struct ata_fis_h2d *fis;
1436 struct ata_port *at;
1438 ccbh = &ccb->csio.ccb_h;
1440 at = atx ? atx : ap->ap_ata[0];
1442 switch (ccbh->flags & CAM_DIR_MASK) {
1444 flags = ATA_F_PACKET | ATA_F_READ;
1447 flags = ATA_F_PACKET | ATA_F_WRITE;
1450 flags = ATA_F_PACKET;
1453 ccbh->status = CAM_REQ_INVALID;
1460 * Special handling to get the rfis back into host memory while
1461 * still allowing the chip to run commands in parallel to
1462 * ATAPI devices behind a PM.
1464 flags |= ATA_F_AUTOSENSE;
1467 * The command has to fit in the packet command buffer.
1469 if (csio->cdb_len < 6 || csio->cdb_len > 16) {
1470 ccbh->status = CAM_CCB_LEN_ERR;
1476 * Initialize the XA and FIS. It is unclear how much of
1477 * this has to mimic the equivalent ATA command.
1479 * XXX not passing NULL at for direct attach!
1481 xa = ahci_ata_get_xfer(ap, atx);
1484 fis->flags = ATA_H2D_FLAGS_CMD | at->at_target;
1485 fis->command = ATA_C_PACKET;
1486 fis->device = ATA_H2D_DEVICE_LBA;
1487 fis->sector_count = xa->tag << 3;
1488 if (flags & (ATA_F_READ | ATA_F_WRITE)) {
1489 if (flags & ATA_F_WRITE) {
1490 fis->features = ATA_H2D_FEATURES_DMA |
1491 ATA_H2D_FEATURES_DIR_WRITE;
1493 fis->features = ATA_H2D_FEATURES_DMA |
1494 ATA_H2D_FEATURES_DIR_READ;
1500 fis->control = ATA_FIS_CONTROL_4BIT;
1503 xa->data = csio->data_ptr;
1504 xa->datalen = csio->dxfer_len;
1505 xa->timeout = ccbh->timeout; /* milliseconds */
1507 if (ccbh->flags & CAM_POLLED)
1508 xa->flags |= ATA_F_POLL;
1511 * Copy the cdb to the packetcmd buffer in the FIS using a
1512 * convenient pointer in the xa.
1514 * Zero-out any trailing bytes in case the ATAPI device cares.
1516 cdbs = (void *)((ccbh->flags & CAM_CDB_POINTER) ?
1517 csio->cdb_io.cdb_ptr : csio->cdb_io.cdb_bytes);
1518 bcopy(cdbs, xa->packetcmd, csio->cdb_len);
1519 if (csio->cdb_len < 16)
1520 bzero(xa->packetcmd + csio->cdb_len, 16 - csio->cdb_len);
1523 kprintf("opcode %d cdb_len %d dxfer_len %d\n",
1524 cdbs->generic.opcode,
1525 csio->cdb_len, csio->dxfer_len);
1529 * Some ATAPI commands do not actually follow the SCSI standard.
1531 cdbd = (void *)xa->packetcmd;
1533 switch(cdbd->generic.opcode) {
1536 * Force SENSE requests to the ATAPI sense length.
1538 * It is unclear if this is needed or not.
1540 if (cdbd->sense.length == SSD_FULL_SIZE) {
1542 kprintf("%s: Shortening sense request\n",
1545 cdbd->sense.length = offsetof(struct scsi_sense_data,
1551 * Some ATAPI devices can't handle long inquiry lengths,
1552 * don't ask me why. Truncate the inquiry length.
1554 if (cdbd->inquiry.page_code == 0 &&
1555 cdbd->inquiry.length > SHORT_INQUIRY_LENGTH) {
1556 cdbd->inquiry.length = SHORT_INQUIRY_LENGTH;
1562 * Convert *_6 to *_10 commands. Most ATAPI devices
1563 * cannot handle the SCSI READ_6 and WRITE_6 commands.
1565 cdbd->rw_10.opcode |= 0x20;
1566 cdbd->rw_10.byte2 = 0;
1567 cdbd->rw_10.addr[0] = cdbs->rw_6.addr[0] & 0x1F;
1568 cdbd->rw_10.addr[1] = cdbs->rw_6.addr[1];
1569 cdbd->rw_10.addr[2] = cdbs->rw_6.addr[2];
1570 cdbd->rw_10.addr[3] = 0;
1571 cdbd->rw_10.reserved = 0;
1572 cdbd->rw_10.length[0] = 0;
1573 cdbd->rw_10.length[1] = cdbs->rw_6.length;
1574 cdbd->rw_10.control = cdbs->rw_6.control;
1583 xa->complete = ahci_atapi_complete_cmd;
1584 xa->atascsi_private = ccb;
1585 ccb->ccb_h.sim_priv.entries[0].ptr = ap;
1586 ahci_os_lock_port(ap);
1588 ahci_os_unlock_port(ap);
1592 * Simulate page inquiries for disk attachments.
1596 ahci_xpt_page_inquiry(struct ahci_port *ap, struct ata_port *at, union ccb *ccb)
1599 struct scsi_vpd_supported_page_list list;
1600 struct scsi_vpd_unit_serial_number serno;
1601 struct scsi_vpd_unit_devid devid;
1609 page = kmalloc(sizeof(*page), M_DEVBUF, M_WAITOK | M_ZERO);
1611 cdb = (void *)((ccb->ccb_h.flags & CAM_CDB_POINTER) ?
1612 ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes);
1614 switch(cdb->inquiry.page_code) {
1615 case SVPD_SUPPORTED_PAGE_LIST:
1617 page->list.device = T_DIRECT;
1618 page->list.page_code = SVPD_SUPPORTED_PAGE_LIST;
1619 page->list.list[i++] = SVPD_SUPPORTED_PAGE_LIST;
1620 page->list.list[i++] = SVPD_UNIT_SERIAL_NUMBER;
1621 page->list.list[i++] = SVPD_UNIT_DEVID;
1622 page->list.length = i;
1623 len = offsetof(struct scsi_vpd_supported_page_list, list[3]);
1625 case SVPD_UNIT_SERIAL_NUMBER:
1627 j = sizeof(at->at_identify.serial);
1628 for (i = 0; i < j && at->at_identify.serial[i] == ' '; ++i)
1630 while (j > i && at->at_identify.serial[j-1] == ' ')
1632 page->serno.device = T_DIRECT;
1633 page->serno.page_code = SVPD_UNIT_SERIAL_NUMBER;
1634 page->serno.length = j - i;
1635 bcopy(at->at_identify.serial + i,
1636 page->serno.serial_num, j - i);
1637 len = offsetof(struct scsi_vpd_unit_serial_number,
1640 case SVPD_UNIT_DEVID:
1641 /* fall through for now */
1643 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
1647 if (ccb->ccb_h.status == CAM_REQ_INPROG) {
1648 if (len <= ccb->csio.dxfer_len) {
1649 ccb->ccb_h.status = CAM_REQ_CMP;
1650 bzero(ccb->csio.data_ptr, ccb->csio.dxfer_len);
1651 bcopy(page, ccb->csio.data_ptr, len);
1652 ccb->csio.resid = ccb->csio.dxfer_len - len;
1654 ccb->ccb_h.status = CAM_CCB_LEN_ERR;
1657 kfree(page, M_DEVBUF);
1661 * Completion function for ATA_PORT_T_DISK cache synchronization.
1665 ahci_ata_complete_disk_synchronize_cache(struct ata_xfer *xa)
1667 union ccb *ccb = xa->atascsi_private;
1668 struct ccb_hdr *ccbh = &ccb->ccb_h;
1669 struct ahci_port *ap = ccb->ccb_h.sim_priv.entries[0].ptr;
1672 case ATA_S_COMPLETE:
1673 ccbh->status = CAM_REQ_CMP;
1674 ccb->csio.scsi_status = SCSI_STATUS_OK;
1677 kprintf("%s: synchronize_cache: error\n",
1678 ATANAME(ap, xa->at));
1679 ccbh->status = CAM_SCSI_STATUS_ERROR | CAM_AUTOSNS_VALID;
1680 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
1681 ahci_ata_dummy_sense(&ccb->csio.sense_data);
1684 kprintf("%s: synchronize_cache: timeout\n",
1685 ATANAME(ap, xa->at));
1686 ccbh->status = CAM_CMD_TIMEOUT;
1689 kprintf("%s: synchronize_cache: unknown state %d\n",
1690 ATANAME(ap, xa->at), xa->state);
1691 panic("%s: Unknown state", ATANAME(ap, xa->at));
1692 ccbh->status = CAM_REQ_CMP_ERR;
1695 ahci_ata_put_xfer(xa);
1696 /*ahci_os_unlock_port(ap); ILLEGAL SEE NOTE-1 AT TOP */
1698 /*ahci_os_lock_port(ap);*/
1702 * Completion function for ATA_PORT_T_DISK I/O
1706 ahci_ata_complete_disk_rw(struct ata_xfer *xa)
1708 union ccb *ccb = xa->atascsi_private;
1709 struct ccb_hdr *ccbh = &ccb->ccb_h;
1710 struct ahci_port *ap = ccb->ccb_h.sim_priv.entries[0].ptr;
1713 case ATA_S_COMPLETE:
1714 ccbh->status = CAM_REQ_CMP;
1715 ccb->csio.scsi_status = SCSI_STATUS_OK;
1718 kprintf("%s: disk_rw: error\n", ATANAME(ap, xa->at));
1719 ccbh->status = CAM_SCSI_STATUS_ERROR | CAM_AUTOSNS_VALID;
1720 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
1721 ahci_ata_dummy_sense(&ccb->csio.sense_data);
1724 kprintf("%s: disk_rw: timeout\n", ATANAME(ap, xa->at));
1725 ccbh->status = CAM_CMD_TIMEOUT;
1726 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
1727 ahci_ata_dummy_sense(&ccb->csio.sense_data);
1730 kprintf("%s: disk_rw: unknown state %d\n",
1731 ATANAME(ap, xa->at), xa->state);
1732 panic("%s: Unknown state", ATANAME(ap, xa->at));
1733 ccbh->status = CAM_REQ_CMP_ERR;
1736 ccb->csio.resid = xa->resid;
1737 ahci_ata_put_xfer(xa);
1738 /*ahci_os_unlock_port(ap); ILLEGAL SEE NOTE-1 AT TOP */
1740 /*ahci_os_lock_port(ap);*/
1744 * Completion function for ATA_PORT_T_ATAPI I/O
1746 * Sense data is returned in the rfis.
1750 ahci_atapi_complete_cmd(struct ata_xfer *xa)
1752 union ccb *ccb = xa->atascsi_private;
1753 struct ccb_hdr *ccbh = &ccb->ccb_h;
1754 struct ahci_port *ap = ccb->ccb_h.sim_priv.entries[0].ptr;
1757 cdb = (void *)((ccb->ccb_h.flags & CAM_CDB_POINTER) ?
1758 ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes);
1761 case ATA_S_COMPLETE:
1762 ccbh->status = CAM_REQ_CMP;
1763 ccb->csio.scsi_status = SCSI_STATUS_OK;
1766 ccbh->status = CAM_SCSI_STATUS_ERROR;
1767 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
1768 ahci_ata_atapi_sense(&xa->rfis, &ccb->csio.sense_data);
1771 kprintf("%s: cmd %d: timeout\n",
1772 PORTNAME(ap), cdb->generic.opcode);
1773 ccbh->status = CAM_CMD_TIMEOUT;
1774 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
1775 ahci_ata_dummy_sense(&ccb->csio.sense_data);
1778 kprintf("%s: cmd %d: unknown state %d\n",
1779 PORTNAME(ap), cdb->generic.opcode, xa->state);
1780 panic("%s: Unknown state", PORTNAME(ap));
1781 ccbh->status = CAM_REQ_CMP_ERR;
1784 ccb->csio.resid = xa->resid;
1785 xa->atascsi_private = NULL;
1786 ahci_ata_put_xfer(xa);
1787 /*ahci_os_unlock_port(ap); ILLEGAL SEE NOTE-1 AT TOP */
1789 /*ahci_os_lock_port(ap);*/
1793 * Construct dummy sense data for errors on DISKs
1797 ahci_ata_dummy_sense(struct scsi_sense_data *sense_data)
1799 sense_data->error_code = SSD_ERRCODE_VALID | SSD_CURRENT_ERROR;
1800 sense_data->segment = 0;
1801 sense_data->flags = SSD_KEY_MEDIUM_ERROR;
1802 sense_data->info[0] = 0;
1803 sense_data->info[1] = 0;
1804 sense_data->info[2] = 0;
1805 sense_data->info[3] = 0;
1806 sense_data->extra_len = 0;
1810 * Construct atapi sense data for errors on ATAPI
1812 * The ATAPI sense data is stored in the passed rfis and must be converted
1813 * to SCSI sense data.
1817 ahci_ata_atapi_sense(struct ata_fis_d2h *rfis,
1818 struct scsi_sense_data *sense_data)
1820 sense_data->error_code = SSD_ERRCODE_VALID | SSD_CURRENT_ERROR;
1821 sense_data->segment = 0;
1822 sense_data->flags = (rfis->error & 0xF0) >> 4;
1823 if (rfis->error & 0x04)
1824 sense_data->flags |= SSD_KEY_ILLEGAL_REQUEST;
1825 if (rfis->error & 0x02)
1826 sense_data->flags |= SSD_EOM;
1827 if (rfis->error & 0x01)
1828 sense_data->flags |= SSD_ILI;
1829 sense_data->info[0] = 0;
1830 sense_data->info[1] = 0;
1831 sense_data->info[2] = 0;
1832 sense_data->info[3] = 0;
1833 sense_data->extra_len = 0;
1838 ahci_strip_string(const char **basep, int *lenp)
1840 const char *base = *basep;
1843 while (len && (*base == 0 || *base == ' ')) {
1847 while (len && (base[len-1] == 0 || base[len-1] == ' '))