Merge branch 'vendor/XZ'
[dragonfly.git] / sys / dev / drm / i915 / intel_fbdev.c
1 /*
2  * Copyright © 2007 David Airlie
3  *
4  * Permission is hereby granted, free of charge, to any person obtaining a
5  * copy of this software and associated documentation files (the "Software"),
6  * to deal in the Software without restriction, including without limitation
7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8  * and/or sell copies of the Software, and to permit persons to whom the
9  * Software is furnished to do so, subject to the following conditions:
10  *
11  * The above copyright notice and this permission notice (including the next
12  * paragraph) shall be included in all copies or substantial portions of the
13  * Software.
14  *
15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21  * DEALINGS IN THE SOFTWARE.
22  *
23  * Authors:
24  *     David Airlie
25  */
26
27 #include <drm/drmP.h>
28 #include <linux/async.h>
29 #include <linux/module.h>
30 #include <linux/kernel.h>
31 #include <linux/errno.h>
32 #include <linux/string.h>
33 #include <linux/mm.h>
34 #include <linux/delay.h>
35 #include <linux/fb.h>
36
37 #include <drm/drmP.h>
38 #include <drm/drm_crtc.h>
39 #include <drm/drm_fb_helper.h>
40 #include "intel_drv.h"
41 #include <drm/i915_drm.h>
42 #include "i915_drv.h"
43
44 #if 0
45 static int intel_fbdev_set_par(struct fb_info *info)
46 {
47         struct drm_fb_helper *fb_helper = info->par;
48         struct intel_fbdev *ifbdev =
49                 container_of(fb_helper, struct intel_fbdev, helper);
50         int ret;
51
52         ret = drm_fb_helper_set_par(info);
53
54         if (ret == 0) {
55                 /*
56                  * FIXME: fbdev presumes that all callbacks also work from
57                  * atomic contexts and relies on that for emergency oops
58                  * printing. KMS totally doesn't do that and the locking here is
59                  * by far not the only place this goes wrong.  Ignore this for
60                  * now until we solve this for real.
61                  */
62                 mutex_lock(&fb_helper->dev->struct_mutex);
63                 ret = i915_gem_object_set_to_gtt_domain(ifbdev->fb->obj,
64                                                         true);
65                 mutex_unlock(&fb_helper->dev->struct_mutex);
66         }
67
68         return ret;
69 }
70
71 static struct fb_ops intelfb_ops = {
72         .owner = THIS_MODULE,
73         .fb_check_var = drm_fb_helper_check_var,
74         .fb_set_par = intel_fbdev_set_par,
75         .fb_fillrect = cfb_fillrect,
76         .fb_copyarea = cfb_copyarea,
77         .fb_imageblit = cfb_imageblit,
78         .fb_pan_display = drm_fb_helper_pan_display,
79         .fb_blank = drm_fb_helper_blank,
80         .fb_setcmap = drm_fb_helper_setcmap,
81         .fb_debug_enter = drm_fb_helper_debug_enter,
82         .fb_debug_leave = drm_fb_helper_debug_leave,
83 };
84 #endif
85
86 static int intelfb_alloc(struct drm_fb_helper *helper,
87                          struct drm_fb_helper_surface_size *sizes)
88 {
89         struct intel_fbdev *ifbdev =
90                 container_of(helper, struct intel_fbdev, helper);
91         struct drm_framebuffer *fb;
92         struct drm_device *dev = helper->dev;
93         struct drm_mode_fb_cmd2 mode_cmd = {};
94         struct drm_i915_gem_object *obj;
95         int size, ret;
96
97         /* we don't do packed 24bpp */
98         if (sizes->surface_bpp == 24)
99                 sizes->surface_bpp = 32;
100
101         mode_cmd.width = sizes->surface_width;
102         mode_cmd.height = sizes->surface_height;
103
104         mode_cmd.pitches[0] = ALIGN(mode_cmd.width *
105                                     DIV_ROUND_UP(sizes->surface_bpp, 8), 64);
106         mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp,
107                                                           sizes->surface_depth);
108
109         size = mode_cmd.pitches[0] * mode_cmd.height;
110         size = PAGE_ALIGN(size);
111         obj = i915_gem_object_create_stolen(dev, size);
112         if (obj == NULL)
113                 obj = i915_gem_alloc_object(dev, size);
114         if (!obj) {
115                 DRM_ERROR("failed to allocate framebuffer\n");
116                 ret = -ENOMEM;
117                 goto out;
118         }
119
120         /* Flush everything out, we'll be doing GTT only from now on */
121         ret = intel_pin_and_fence_fb_obj(dev, obj, NULL);
122         if (ret) {
123                 DRM_ERROR("failed to pin obj: %d\n", ret);
124                 goto out_unref;
125         }
126
127         fb = __intel_framebuffer_create(dev, &mode_cmd, obj);
128         if (IS_ERR(fb)) {
129                 ret = PTR_ERR(fb);
130                 goto out_unpin;
131         }
132
133         ifbdev->fb = to_intel_framebuffer(fb);
134
135         return 0;
136
137 out_unpin:
138         i915_gem_object_ggtt_unpin(obj);
139 out_unref:
140         drm_gem_object_unreference(&obj->base);
141 out:
142         return ret;
143 }
144
145 static int intelfb_create(struct drm_fb_helper *helper,
146                           struct drm_fb_helper_surface_size *sizes)
147 {
148         struct intel_fbdev *ifbdev =
149                 container_of(helper, struct intel_fbdev, helper);
150         struct intel_framebuffer *intel_fb = ifbdev->fb;
151         struct drm_device *dev = helper->dev;
152         struct drm_i915_private *dev_priv = dev->dev_private;
153         struct fb_info *info;
154         struct drm_framebuffer *fb;
155         struct drm_i915_gem_object *obj;
156         device_t vga_dev;
157         int size, ret;
158         bool prealloc = false;
159
160         mutex_lock(&dev->struct_mutex);
161
162         if (intel_fb &&
163             (sizes->fb_width > intel_fb->base.width ||
164              sizes->fb_height > intel_fb->base.height)) {
165                 DRM_DEBUG_KMS("BIOS fb too small (%dx%d), we require (%dx%d),"
166                               " releasing it\n",
167                               intel_fb->base.width, intel_fb->base.height,
168                               sizes->fb_width, sizes->fb_height);
169                 drm_framebuffer_unreference(&intel_fb->base);
170                 intel_fb = ifbdev->fb = NULL;
171         }
172         if (!intel_fb || WARN_ON(!intel_fb->obj)) {
173                 DRM_DEBUG_KMS("no BIOS fb, allocating a new one\n");
174                 ret = intelfb_alloc(helper, sizes);
175                 if (ret)
176                         goto out_unlock;
177                 intel_fb = ifbdev->fb;
178         } else {
179                 DRM_DEBUG_KMS("re-using BIOS fb\n");
180                 prealloc = true;
181                 sizes->fb_width = intel_fb->base.width;
182                 sizes->fb_height = intel_fb->base.height;
183         }
184
185         obj = intel_fb->obj;
186         size = obj->base.size;
187
188 #if 0
189         info = framebuffer_alloc(0, &dev->pdev->dev);
190 #else
191         info = kmalloc(sizeof(struct fb_info), M_DRM, M_WAITOK | M_ZERO);
192 #endif
193         if (!info) {
194                 ret = -ENOMEM;
195                 goto out_unpin;
196         }
197 #if 0
198         info->par = helper;
199 #endif
200
201 #ifdef __DragonFly__
202         vga_dev = device_get_parent(dev->dev);
203         info = kmalloc(sizeof(struct fb_info), M_DRM, M_WAITOK | M_ZERO);
204         info->width = sizes->fb_width;
205         info->height = sizes->fb_height;
206         info->stride =
207             ALIGN(sizes->surface_width * ((sizes->surface_bpp + 7) / 8), 64);
208         info->depth = sizes->surface_bpp;
209         info->paddr = dev_priv->gtt.mappable_base + i915_gem_obj_ggtt_offset(obj);
210         info->is_vga_boot_display = vga_pci_is_boot_display(vga_dev);
211         info->vaddr =
212             (vm_offset_t)pmap_mapdev_attr(info->paddr,
213                 sizes->surface_height * info->stride,
214                 VM_MEMATTR_WRITE_COMBINING);
215 #endif
216
217         fb = &ifbdev->fb->base;
218
219         ifbdev->helper.fb = fb;
220         ifbdev->helper.fbdev = info;
221
222 #if 0
223         strcpy(info->fix.id, "inteldrmfb");
224
225         info->flags = FBINFO_DEFAULT | FBINFO_CAN_FORCE_OUTPUT;
226         info->fbops = &intelfb_ops;
227
228         ret = fb_alloc_cmap(&info->cmap, 256, 0);
229         if (ret) {
230                 ret = -ENOMEM;
231                 goto out_unpin;
232         }
233         /* setup aperture base/size for vesafb takeover */
234         info->apertures = alloc_apertures(1);
235         if (!info->apertures) {
236                 ret = -ENOMEM;
237                 goto out_unpin;
238         }
239         info->apertures->ranges[0].base = dev->mode_config.fb_base;
240         info->apertures->ranges[0].size = dev_priv->gtt.mappable_end;
241
242         info->fix.smem_start = dev->mode_config.fb_base + i915_gem_obj_ggtt_offset(obj);
243         info->fix.smem_len = size;
244
245         info->screen_base =
246                 ioremap_wc(dev_priv->gtt.mappable_base + i915_gem_obj_ggtt_offset(obj),
247                            size);
248         if (!info->screen_base) {
249                 ret = -ENOSPC;
250                 goto out_unpin;
251         }
252         info->screen_size = size;
253
254         /* This driver doesn't need a VT switch to restore the mode on resume */
255         info->skip_vt_switch = true;
256
257         drm_fb_helper_fill_fix(info, fb->pitches[0], fb->depth);
258         drm_fb_helper_fill_var(info, &ifbdev->helper, sizes->fb_width, sizes->fb_height);
259
260         /* If the object is shmemfs backed, it will have given us zeroed pages.
261          * If the object is stolen however, it will be full of whatever
262          * garbage was left in there.
263          */
264         if (ifbdev->fb->obj->stolen && !prealloc)
265                 memset_io(info->screen_base, 0, info->screen_size);
266
267         /* Use default scratch pixmap (info->pixmap.flags = FB_PIXMAP_SYSTEM) */
268 #endif
269
270         DRM_DEBUG_KMS("allocated %dx%d fb: 0x%08lx, bo %p\n",
271                       fb->width, fb->height,
272                       i915_gem_obj_ggtt_offset(obj), obj);
273
274         mutex_unlock(&dev->struct_mutex);
275 #if 0
276         vga_switcheroo_client_fb_set(dev->pdev, info);
277 #endif
278         return 0;
279
280 out_unpin:
281         i915_gem_object_ggtt_unpin(obj);
282         drm_gem_object_unreference(&obj->base);
283 out_unlock:
284         mutex_unlock(&dev->struct_mutex);
285         return ret;
286 }
287
288 /** Sets the color ramps on behalf of RandR */
289 static void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
290                                     u16 blue, int regno)
291 {
292         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
293
294         intel_crtc->lut_r[regno] = red >> 8;
295         intel_crtc->lut_g[regno] = green >> 8;
296         intel_crtc->lut_b[regno] = blue >> 8;
297 }
298
299 static void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
300                                     u16 *blue, int regno)
301 {
302         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
303
304         *red = intel_crtc->lut_r[regno] << 8;
305         *green = intel_crtc->lut_g[regno] << 8;
306         *blue = intel_crtc->lut_b[regno] << 8;
307 }
308
309 static struct drm_fb_helper_crtc *
310 intel_fb_helper_crtc(struct drm_fb_helper *fb_helper, struct drm_crtc *crtc)
311 {
312         int i;
313
314         for (i = 0; i < fb_helper->crtc_count; i++)
315                 if (fb_helper->crtc_info[i].mode_set.crtc == crtc)
316                         return &fb_helper->crtc_info[i];
317
318         return NULL;
319 }
320
321 /*
322  * Try to read the BIOS display configuration and use it for the initial
323  * fb configuration.
324  *
325  * The BIOS or boot loader will generally create an initial display
326  * configuration for us that includes some set of active pipes and displays.
327  * This routine tries to figure out which pipes and connectors are active
328  * and stuffs them into the crtcs and modes array given to us by the
329  * drm_fb_helper code.
330  *
331  * The overall sequence is:
332  *   intel_fbdev_init - from driver load
333  *     intel_fbdev_init_bios - initialize the intel_fbdev using BIOS data
334  *     drm_fb_helper_init - build fb helper structs
335  *     drm_fb_helper_single_add_all_connectors - more fb helper structs
336  *   intel_fbdev_initial_config - apply the config
337  *     drm_fb_helper_initial_config - call ->probe then register_framebuffer()
338  *         drm_setup_crtcs - build crtc config for fbdev
339  *           intel_fb_initial_config - find active connectors etc
340  *         drm_fb_helper_single_fb_probe - set up fbdev
341  *           intelfb_create - re-use or alloc fb, build out fbdev structs
342  *
343  * Note that we don't make special consideration whether we could actually
344  * switch to the selected modes without a full modeset. E.g. when the display
345  * is in VGA mode we need to recalculate watermarks and set a new high-res
346  * framebuffer anyway.
347  */
348 static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
349                                     struct drm_fb_helper_crtc **crtcs,
350                                     struct drm_display_mode **modes,
351                                     bool *enabled, int width, int height)
352 {
353         struct drm_device *dev = fb_helper->dev;
354         int i, j;
355         bool *save_enabled;
356         bool fallback = true;
357         int num_connectors_enabled = 0;
358         int num_connectors_detected = 0;
359
360         save_enabled = kcalloc(dev->mode_config.num_connector, sizeof(bool),
361                                GFP_KERNEL);
362         if (!save_enabled)
363                 return false;
364
365         memcpy(save_enabled, enabled, dev->mode_config.num_connector);
366
367         for (i = 0; i < fb_helper->connector_count; i++) {
368                 struct drm_fb_helper_connector *fb_conn;
369                 struct drm_connector *connector;
370                 struct drm_encoder *encoder;
371                 struct drm_fb_helper_crtc *new_crtc;
372
373                 fb_conn = fb_helper->connector_info[i];
374                 connector = fb_conn->connector;
375
376                 if (connector->status == connector_status_connected)
377                         num_connectors_detected++;
378
379                 if (!enabled[i]) {
380                         DRM_DEBUG_KMS("connector %s not enabled, skipping\n",
381                                       connector->name);
382                         continue;
383                 }
384
385                 if (connector->force == DRM_FORCE_OFF) {
386                         DRM_DEBUG_KMS("connector %s is disabled by user, skipping\n",
387                                       connector->name);
388                         enabled[i] = false;
389                         continue;
390                 }
391
392                 encoder = connector->encoder;
393                 if (!encoder || WARN_ON(!encoder->crtc)) {
394                         if (connector->force > DRM_FORCE_OFF)
395                                 goto bail;
396
397                         DRM_DEBUG_KMS("connector %s has no encoder or crtc, skipping\n",
398                                       connector->name);
399                         enabled[i] = false;
400                         continue;
401                 }
402
403                 num_connectors_enabled++;
404
405                 new_crtc = intel_fb_helper_crtc(fb_helper, encoder->crtc);
406
407                 /*
408                  * Make sure we're not trying to drive multiple connectors
409                  * with a single CRTC, since our cloning support may not
410                  * match the BIOS.
411                  */
412                 for (j = 0; j < fb_helper->connector_count; j++) {
413                         if (crtcs[j] == new_crtc) {
414                                 DRM_DEBUG_KMS("fallback: cloned configuration\n");
415                                 goto bail;
416                         }
417                 }
418
419                 DRM_DEBUG_KMS("looking for cmdline mode on connector %s\n",
420                               connector->name);
421
422                 /* go for command line mode first */
423                 modes[i] = drm_pick_cmdline_mode(fb_conn, width, height);
424
425                 /* try for preferred next */
426                 if (!modes[i]) {
427                         DRM_DEBUG_KMS("looking for preferred mode on connector %s\n",
428                                       connector->name);
429                         modes[i] = drm_has_preferred_mode(fb_conn, width,
430                                                           height);
431                 }
432
433                 /* No preferred mode marked by the EDID? Are there any modes? */
434                 if (!modes[i] && !list_empty(&connector->modes)) {
435                         DRM_DEBUG_KMS("using first mode listed on connector %s\n",
436                                       connector->name);
437                         modes[i] = list_first_entry(&connector->modes,
438                                                     struct drm_display_mode,
439                                                     head);
440                 }
441
442                 /* last resort: use current mode */
443                 if (!modes[i]) {
444                         /*
445                          * IMPORTANT: We want to use the adjusted mode (i.e.
446                          * after the panel fitter upscaling) as the initial
447                          * config, not the input mode, which is what crtc->mode
448                          * usually contains. But since our current fastboot
449                          * code puts a mode derived from the post-pfit timings
450                          * into crtc->mode this works out correctly. We don't
451                          * use hwmode anywhere right now, so use it for this
452                          * since the fb helper layer wants a pointer to
453                          * something we own.
454                          */
455                         DRM_DEBUG_KMS("looking for current mode on connector %s\n",
456                                       connector->name);
457                         intel_mode_from_pipe_config(&encoder->crtc->hwmode,
458                                                     &to_intel_crtc(encoder->crtc)->config);
459                         modes[i] = &encoder->crtc->hwmode;
460                 }
461                 crtcs[i] = new_crtc;
462
463                 DRM_DEBUG_KMS("connector %s on pipe %c [CRTC:%d]: %dx%d%s\n",
464                               connector->name,
465                               pipe_name(to_intel_crtc(encoder->crtc)->pipe),
466                               encoder->crtc->base.id,
467                               modes[i]->hdisplay, modes[i]->vdisplay,
468                               modes[i]->flags & DRM_MODE_FLAG_INTERLACE ? "i" :"");
469
470                 fallback = false;
471         }
472
473         /*
474          * If the BIOS didn't enable everything it could, fall back to have the
475          * same user experiencing of lighting up as much as possible like the
476          * fbdev helper library.
477          */
478         if (num_connectors_enabled != num_connectors_detected &&
479             num_connectors_enabled < INTEL_INFO(dev)->num_pipes) {
480                 DRM_DEBUG_KMS("fallback: Not all outputs enabled\n");
481                 DRM_DEBUG_KMS("Enabled: %i, detected: %i\n", num_connectors_enabled,
482                               num_connectors_detected);
483                 fallback = true;
484         }
485
486         if (fallback) {
487 bail:
488                 DRM_DEBUG_KMS("Not using firmware configuration\n");
489                 memcpy(enabled, save_enabled, dev->mode_config.num_connector);
490                 kfree(save_enabled);
491                 return false;
492         }
493
494         kfree(save_enabled);
495         return true;
496 }
497
498 static const struct drm_fb_helper_funcs intel_fb_helper_funcs = {
499         .initial_config = intel_fb_initial_config,
500         .gamma_set = intel_crtc_fb_gamma_set,
501         .gamma_get = intel_crtc_fb_gamma_get,
502         .fb_probe = intelfb_create,
503 };
504
505 static void intel_fbdev_destroy(struct drm_device *dev,
506                                 struct intel_fbdev *ifbdev)
507 {
508 #if 0
509         if (ifbdev->helper.fbdev) {
510                 struct fb_info *info = ifbdev->helper.fbdev;
511
512                 unregister_framebuffer(info);
513                 iounmap(info->screen_base);
514                 if (info->cmap.len)
515                         fb_dealloc_cmap(&info->cmap);
516
517                 framebuffer_release(info);
518         }
519 #endif
520
521         drm_fb_helper_fini(&ifbdev->helper);
522
523         drm_framebuffer_unregister_private(&ifbdev->fb->base);
524         drm_framebuffer_unreference(&ifbdev->fb->base);
525 }
526
527 /*
528  * Build an intel_fbdev struct using a BIOS allocated framebuffer, if possible.
529  * The core display code will have read out the current plane configuration,
530  * so we use that to figure out if there's an object for us to use as the
531  * fb, and if so, we re-use it for the fbdev configuration.
532  *
533  * Note we only support a single fb shared across pipes for boot (mostly for
534  * fbcon), so we just find the biggest and use that.
535  */
536 static bool intel_fbdev_init_bios(struct drm_device *dev,
537                                  struct intel_fbdev *ifbdev)
538 {
539         struct intel_framebuffer *fb = NULL;
540         struct drm_crtc *crtc;
541         struct intel_crtc *intel_crtc;
542         struct intel_plane_config *plane_config = NULL;
543         unsigned int max_size = 0;
544
545         if (!i915.fastboot)
546                 return false;
547
548         /* Find the largest fb */
549         for_each_crtc(dev, crtc) {
550                 intel_crtc = to_intel_crtc(crtc);
551
552                 if (!intel_crtc->active || !crtc->primary->fb) {
553                         DRM_DEBUG_KMS("pipe %c not active or no fb, skipping\n",
554                                       pipe_name(intel_crtc->pipe));
555                         continue;
556                 }
557
558                 if (intel_crtc->plane_config.size > max_size) {
559                         DRM_DEBUG_KMS("found possible fb from plane %c\n",
560                                       pipe_name(intel_crtc->pipe));
561                         plane_config = &intel_crtc->plane_config;
562                         fb = to_intel_framebuffer(crtc->primary->fb);
563                         max_size = plane_config->size;
564                 }
565         }
566
567         if (!fb) {
568                 DRM_DEBUG_KMS("no active fbs found, not using BIOS config\n");
569                 goto out;
570         }
571
572         /* Now make sure all the pipes will fit into it */
573         for_each_crtc(dev, crtc) {
574                 unsigned int cur_size;
575
576                 intel_crtc = to_intel_crtc(crtc);
577
578                 if (!intel_crtc->active) {
579                         DRM_DEBUG_KMS("pipe %c not active, skipping\n",
580                                       pipe_name(intel_crtc->pipe));
581                         continue;
582                 }
583
584                 DRM_DEBUG_KMS("checking plane %c for BIOS fb\n",
585                               pipe_name(intel_crtc->pipe));
586
587                 /*
588                  * See if the plane fb we found above will fit on this
589                  * pipe.  Note we need to use the selected fb's pitch and bpp
590                  * rather than the current pipe's, since they differ.
591                  */
592                 cur_size = intel_crtc->config.adjusted_mode.crtc_hdisplay;
593                 cur_size = cur_size * fb->base.bits_per_pixel / 8;
594                 if (fb->base.pitches[0] < cur_size) {
595                         DRM_DEBUG_KMS("fb not wide enough for plane %c (%d vs %d)\n",
596                                       pipe_name(intel_crtc->pipe),
597                                       cur_size, fb->base.pitches[0]);
598                         plane_config = NULL;
599                         fb = NULL;
600                         break;
601                 }
602
603                 cur_size = intel_crtc->config.adjusted_mode.crtc_vdisplay;
604                 cur_size = ALIGN(cur_size, plane_config->tiled ? (IS_GEN2(dev) ? 16 : 8) : 1);
605                 cur_size *= fb->base.pitches[0];
606                 DRM_DEBUG_KMS("pipe %c area: %dx%d, bpp: %d, size: %d\n",
607                               pipe_name(intel_crtc->pipe),
608                               intel_crtc->config.adjusted_mode.crtc_hdisplay,
609                               intel_crtc->config.adjusted_mode.crtc_vdisplay,
610                               fb->base.bits_per_pixel,
611                               cur_size);
612
613                 if (cur_size > max_size) {
614                         DRM_DEBUG_KMS("fb not big enough for plane %c (%d vs %d)\n",
615                                       pipe_name(intel_crtc->pipe),
616                                       cur_size, max_size);
617                         plane_config = NULL;
618                         fb = NULL;
619                         break;
620                 }
621
622                 DRM_DEBUG_KMS("fb big enough for plane %c (%d >= %d)\n",
623                               pipe_name(intel_crtc->pipe),
624                               max_size, cur_size);
625         }
626
627         if (!fb) {
628                 DRM_DEBUG_KMS("BIOS fb not suitable for all pipes, not using\n");
629                 goto out;
630         }
631
632         ifbdev->preferred_bpp = fb->base.bits_per_pixel;
633         ifbdev->fb = fb;
634
635         drm_framebuffer_reference(&ifbdev->fb->base);
636
637         /* Final pass to check if any active pipes don't have fbs */
638         for_each_crtc(dev, crtc) {
639                 intel_crtc = to_intel_crtc(crtc);
640
641                 if (!intel_crtc->active)
642                         continue;
643
644                 WARN(!crtc->primary->fb,
645                      "re-used BIOS config but lost an fb on crtc %d\n",
646                      crtc->base.id);
647         }
648
649
650         DRM_DEBUG_KMS("using BIOS fb for initial console\n");
651         return true;
652
653 out:
654
655         return false;
656 }
657
658 static void intel_fbdev_suspend_worker(struct work_struct *work)
659 {
660         intel_fbdev_set_suspend(container_of(work,
661                                              struct drm_i915_private,
662                                              fbdev_suspend_work)->dev,
663                                 FBINFO_STATE_RUNNING,
664                                 true);
665 }
666
667 int intel_fbdev_init(struct drm_device *dev)
668 {
669         struct intel_fbdev *ifbdev;
670         struct drm_i915_private *dev_priv = dev->dev_private;
671         int ret;
672
673         if (WARN_ON(INTEL_INFO(dev)->num_pipes == 0))
674                 return -ENODEV;
675
676         ifbdev = kzalloc(sizeof(struct intel_fbdev), GFP_KERNEL);
677         if (ifbdev == NULL)
678                 return -ENOMEM;
679
680         drm_fb_helper_prepare(dev, &ifbdev->helper, &intel_fb_helper_funcs);
681
682         if (!intel_fbdev_init_bios(dev, ifbdev))
683                 ifbdev->preferred_bpp = 32;
684
685         ret = drm_fb_helper_init(dev, &ifbdev->helper,
686                                  INTEL_INFO(dev)->num_pipes, 4);
687         if (ret) {
688                 kfree(ifbdev);
689                 return ret;
690         }
691
692         dev_priv->fbdev = ifbdev;
693         INIT_WORK(&dev_priv->fbdev_suspend_work, intel_fbdev_suspend_worker);
694
695         drm_fb_helper_single_add_all_connectors(&ifbdev->helper);
696
697         return 0;
698 }
699
700 void intel_fbdev_initial_config(void *data, async_cookie_t cookie)
701 {
702         struct drm_i915_private *dev_priv = data;
703
704         /* Due to peculiar init order wrt to hpd handling this is separate. */
705         drm_fb_helper_initial_config(&dev_priv->fbdev->helper, 32);
706 }
707
708 void intel_fbdev_fini(struct drm_device *dev)
709 {
710         struct drm_i915_private *dev_priv = dev->dev_private;
711         if (!dev_priv->fbdev)
712                 return;
713
714 #if 0
715         flush_work(&dev_priv->fbdev_suspend_work);
716 #endif
717
718         async_synchronize_full();
719         intel_fbdev_destroy(dev, dev_priv->fbdev);
720         kfree(dev_priv->fbdev);
721         dev_priv->fbdev = NULL;
722 }
723
724 void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous)
725 {
726 #if 0
727         struct drm_i915_private *dev_priv = dev->dev_private;
728         struct intel_fbdev *ifbdev = dev_priv->fbdev;
729         struct fb_info *info;
730
731         if (!ifbdev)
732                 return;
733
734         info = ifbdev->helper.fbdev;
735
736         if (synchronous) {
737                 /* Flush any pending work to turn the console on, and then
738                  * wait to turn it off. It must be synchronous as we are
739                  * about to suspend or unload the driver.
740                  *
741                  * Note that from within the work-handler, we cannot flush
742                  * ourselves, so only flush outstanding work upon suspend!
743                  */
744                 if (state != FBINFO_STATE_RUNNING)
745                         flush_work(&dev_priv->fbdev_suspend_work);
746                 console_lock();
747         } else {
748                 /*
749                  * The console lock can be pretty contented on resume due
750                  * to all the printk activity.  Try to keep it out of the hot
751                  * path of resume if possible.
752                  */
753                 WARN_ON(state != FBINFO_STATE_RUNNING);
754                 if (!console_trylock()) {
755                         /* Don't block our own workqueue as this can
756                          * be run in parallel with other i915.ko tasks.
757                          */
758                         schedule_work(&dev_priv->fbdev_suspend_work);
759                         return;
760                 }
761         }
762
763         /* On resume from hibernation: If the object is shmemfs backed, it has
764          * been restored from swap. If the object is stolen however, it will be
765          * full of whatever garbage was left in there.
766          */
767         if (state == FBINFO_STATE_RUNNING && ifbdev->fb->obj->stolen)
768                 memset_io(info->screen_base, 0, info->screen_size);
769
770         fb_set_suspend(info, state);
771         console_unlock();
772 #endif
773 }
774
775 void intel_fbdev_output_poll_changed(struct drm_device *dev)
776 {
777         struct drm_i915_private *dev_priv = dev->dev_private;
778         drm_fb_helper_hotplug_event(&dev_priv->fbdev->helper);
779 }
780
781 void intel_fbdev_restore_mode(struct drm_device *dev)
782 {
783         int ret;
784         struct drm_i915_private *dev_priv = dev->dev_private;
785
786         if (INTEL_INFO(dev)->num_pipes == 0)
787                 return;
788
789         ret = drm_fb_helper_restore_fbdev_mode_unlocked(&dev_priv->fbdev->helper);
790         if (ret)
791                 DRM_DEBUG("failed to restore crtc mode\n");
792 }