man4: use .Mt for emails (2/2)
[dragonfly.git] / share / man / man4 / divert.4
1 .\" $FreeBSD: src/share/man/man4/divert.4,v 1.15.2.7 2002/03/13 18:38:44 keramida Exp $
2 .\"
3 .Dd June 18, 1996
4 .Dt DIVERT 4
5 .Os
6 .Sh NAME
7 .Nm divert
8 .Nd kernel packet diversion mechanism
9 .Sh SYNOPSIS
10 .In sys/types.h
11 .In sys/socket.h
12 .In netinet/in.h
13 .Ft int
14 .Fn socket PF_INET SOCK_RAW IPPROTO_DIVERT
15 .Sh DESCRIPTION
16 Divert sockets are similar to raw IP sockets, except that they
17 can be bound to a specific
18 .Nm
19 port via the
20 .Xr bind 2
21 system call.
22 The IP address in the bind is ignored; only the port
23 number is significant.
24 A divert socket bound to a divert port will receive all packets diverted
25 to that port by some (here unspecified) kernel mechanism(s).
26 Packets may also be written to a divert port, in which case they
27 re-enter kernel IP packet processing.
28 .Pp
29 Divert sockets are normally used in conjunction with
30 .Dx Ns 's
31 packet filtering implementation and the
32 .Xr ipfw 8
33 program.
34 By reading from and writing to a divert socket, matching packets
35 can be passed through an arbitrary ``filter'' as they travel through
36 the host machine, special routing tricks can be done, etc.
37 .Sh READING PACKETS
38 Packets are diverted either as they are ``incoming'' or ``outgoing.''
39 Incoming packets are diverted after reception on an IP interface,
40 whereas outgoing packets are diverted before next hop forwarding.
41 .Pp
42 Diverted packets may be read unaltered via
43 .Xr read 2 ,
44 .Xr recv 2 ,
45 or
46 .Xr recvfrom 2 .
47 In the latter case, the address returned will have its port set to
48 some tag supplied by the packet diverter, (usually the ipfw rule number)
49 and the IP address set to the (first) address of
50 the interface on which the packet was received (if the packet
51 was incoming) or
52 .Dv INADDR_ANY
53 (if the packet was outgoing). In the case of an incoming packet the interface
54 name will also be placed in the 8 bytes following the address,
55 (assuming it fits).
56 .Sh WRITING PACKETS
57 Writing to a divert socket is similar to writing to a raw IP socket;
58 the packet is injected ``as is'' into the normal kernel IP packet
59 processing and minimal error checking is done.
60 Packets are written as either incoming or outgoing:
61 if
62 .Xr write 2
63 or
64 .Xr send 2
65 is used to deliver the packet, or if
66 .Xr sendto 2
67 is used with a destination IP address of
68 .Dv INADDR_ANY ,
69 then the packet is treated as if it were outgoing, i.e., destined
70 for a non-local address.  Otherwise, the packet is assumed to be
71 incoming and full packet routing is done.
72 .Pp
73 In the latter case, the
74 IP address specified must match the address of some local interface,
75 or an interface name
76 must be found after the IP address.
77 If an interface name is found,
78 that interface will be used and the value of the IP address will be
79 ignored (other than the fact that it is not
80 .Dv INADDR_ANY ) .
81 This is to indicate on which interface the packet ``arrived.''
82 .Pp
83 Normally, packets read as incoming should be written as incoming;
84 similarly for outgoing packets.  When reading and then writing back
85 packets, passing the same socket address supplied by
86 .Xr recvfrom 2
87 unmodified to
88 .Xr sendto 2
89 simplifies things (see below).
90 .Pp
91 The port part of the socket address passed to the
92 .Xr sendto 2
93 contains a tag that should be meaningful to the diversion module.
94 In the
95 case of
96 .Xr ipfw 8
97 the tag is interpreted as the rule number
98 .Em after which
99 rule processing should restart.
100 .Sh LOOP AVOIDANCE
101 Packets written into a divert socket
102 (using
103 .Xr sendto 2 )
104 re-enter the packet filter at the rule number
105 following the tag given in the port part of the socket address, which
106 is usually already set at the rule number that caused the diversion
107 (not the next rule if there are several at the same number). If the 'tag'
108 is altered to indicate an alternative re-entry point, care should be taken
109 to avoid loops, where the same packet is diverted more than once at the
110 same rule.
111 .Sh DETAILS
112 To enable divert sockets, your kernel must be compiled with the option
113 .Dv IPDIVERT .
114 .Pp
115 If a packet is diverted but no socket is bound to the
116 port, or if
117 .Dv IPDIVERT
118 is not enabled in the kernel, the packet is dropped.
119 .Pp
120 Incoming packet fragments which get diverted are fully reassembled
121 before delivery; the diversion of any one fragment causes the entire
122 packet to get diverted.
123 If different fragments divert to different ports,
124 then which port ultimately gets chosen is unpredictable.
125 .Pp
126 Packets are received and sent unchanged, except that
127 packets read as outgoing have invalid IP header checksums, and
128 packets written as outgoing have their IP header checksums overwritten
129 with the correct value.
130 Packets written as incoming and having incorrect checksums will be dropped.
131 Otherwise, all header fields are unchanged (and therefore in network order).
132 .Pp
133 Binding to port numbers less than 1024 requires super-user access, as does
134 creating a socket of type SOCK_RAW.
135 .Sh ERRORS
136 Writing to a divert socket can return these errors, along with
137 the usual errors possible when writing raw packets:
138 .Bl -tag -width Er
139 .It Bq Er EINVAL
140 The packet had an invalid header.
141 .It Bq Er EADDRNOTAVAIL
142 The destination address contained an IP address not equal to
143 .Dv INADDR_ANY
144 that was not associated with any interface.
145 .El
146 .Sh SEE ALSO
147 .Xr bind 2 ,
148 .Xr recvfrom 2 ,
149 .Xr sendto 2 ,
150 .Xr socket 2 ,
151 .Xr ipfw 8
152 .Sh AUTHORS
153 .An Archie Cobbs Aq Mt archie@FreeBSD.org ,
154 Whistle Communications Corp.
155 .Sh BUGS
156 This is an attempt to provide a clean way for user mode processes
157 to implement various IP tricks like address translation, but it
158 could be cleaner, and it's too dependent on
159 .Xr ipfw 8 .
160 .Pp
161 It's questionable whether incoming fragments should be reassembled
162 before being diverted.
163 For example, if only some fragments of a
164 packet destined for another machine don't get routed through the
165 local machine, the packet is lost.
166 This should probably be
167 a settable socket option in any case.