sys/dev/drm/i915/intel_dvo.c

   1 /*
   2  * Copyright 2006 Dave Airlie <airlied@linux.ie>
   3  * Copyright © 2006-2007 Intel Corporation
   4  *
   5  * Permission is hereby granted, free of charge, to any person obtaining a
   6  * copy of this software and associated documentation files (the "Software"),
   7  * to deal in the Software without restriction, including without limitation
   8  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   9  * and/or sell copies of the Software, and to permit persons to whom the
  10  * Software is furnished to do so, subject to the following conditions:
  11  *
  12  * The above copyright notice and this permission notice (including the next
  13  * paragraph) shall be included in all copies or substantial portions of the
  14  * Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  21  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  22  * DEALINGS IN THE SOFTWARE.
  23  *
  24  * Authors:
  25  *      Eric Anholt <eric@anholt.net>
  26  */
  27 #include <linux/i2c.h>
  28 #include <drm/drmP.h>
  29 #include <drm/drm_crtc.h>
  30 #include "intel_drv.h"
  31 #include <drm/i915_drm.h>
  32 #include "i915_drv.h"
  33 #include "dvo.h"
  34
  35 #define SIL164_ADDR     0x38
  36 #define CH7xxx_ADDR     0x76
  37 #define TFP410_ADDR     0x38
  38 #define NS2501_ADDR     0x38
  39
  40 static const struct intel_dvo_device intel_dvo_devices[] = {
  41         {
  42                 .type = INTEL_DVO_CHIP_TMDS,
  43                 .name = "sil164",
  44                 .dvo_reg = DVOC,
  45                 .slave_addr = SIL164_ADDR,
  46                 .dev_ops = &sil164_ops,
  47         },
  48         {
  49                 .type = INTEL_DVO_CHIP_TMDS,
  50                 .name = "ch7xxx",
  51                 .dvo_reg = DVOC,
  52                 .slave_addr = CH7xxx_ADDR,
  53                 .dev_ops = &ch7xxx_ops,
  54         },
  55         {
  56                 .type = INTEL_DVO_CHIP_TMDS,
  57                 .name = "ch7xxx",
  58                 .dvo_reg = DVOC,
  59                 .slave_addr = 0x75, /* For some ch7010 */
  60                 .dev_ops = &ch7xxx_ops,
  61         },
  62         {
  63                 .type = INTEL_DVO_CHIP_LVDS,
  64                 .name = "ivch",
  65                 .dvo_reg = DVOA,
  66                 .slave_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */
  67                 .dev_ops = &ivch_ops,
  68         },
  69         {
  70                 .type = INTEL_DVO_CHIP_TMDS,
  71                 .name = "tfp410",
  72                 .dvo_reg = DVOC,
  73                 .slave_addr = TFP410_ADDR,
  74                 .dev_ops = &tfp410_ops,
  75         },
  76         {
  77                 .type = INTEL_DVO_CHIP_LVDS,
  78                 .name = "ch7017",
  79                 .dvo_reg = DVOC,
  80                 .slave_addr = 0x75,
  81                 .gpio = GMBUS_PORT_DPB,
  82                 .dev_ops = &ch7017_ops,
  83         },
  84         {
  85                 .type = INTEL_DVO_CHIP_TMDS,
  86                 .name = "ns2501",
  87                 .dvo_reg = DVOC,
  88                 .slave_addr = NS2501_ADDR,
  89                 .dev_ops = &ns2501_ops,
  90        }
  91 };
  92
  93 struct intel_dvo {
  94         struct intel_encoder base;
  95
  96         struct intel_dvo_device dev;
  97
  98         struct drm_display_mode *panel_fixed_mode;
  99         bool panel_wants_dither;
 100 };
 101
 102 static struct intel_dvo *enc_to_dvo(struct intel_encoder *encoder)
 103 {
 104         return container_of(encoder, struct intel_dvo, base);
 105 }
 106
 107 static struct intel_dvo *intel_attached_dvo(struct drm_connector *connector)
 108 {
 109         return enc_to_dvo(intel_attached_encoder(connector));
 110 }
 111
 112 static bool intel_dvo_connector_get_hw_state(struct intel_connector *connector)
 113 {
 114         struct intel_dvo *intel_dvo = intel_attached_dvo(&connector->base);
 115
 116         return intel_dvo->dev.dev_ops->get_hw_state(&intel_dvo->dev);
 117 }
 118
 119 static bool intel_dvo_get_hw_state(struct intel_encoder *encoder,
 120                                    enum i915_pipe *pipe)
 121 {
 122         struct drm_device *dev = encoder->base.dev;
 123         struct drm_i915_private *dev_priv = dev->dev_private;
 124         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 125         u32 tmp;
 126
 127         tmp = I915_READ(intel_dvo->dev.dvo_reg);
 128
 129         if (!(tmp & DVO_ENABLE))
 130                 return false;
 131
 132         *pipe = PORT_TO_PIPE(tmp);
 133
 134         return true;
 135 }
 136
 137 static void intel_dvo_get_config(struct intel_encoder *encoder,
 138                                  struct intel_crtc_config *pipe_config)
 139 {
 140         struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
 141         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 142         u32 tmp, flags = 0;
 143
 144         tmp = I915_READ(intel_dvo->dev.dvo_reg);
 145         if (tmp & DVO_HSYNC_ACTIVE_HIGH)
 146                 flags |= DRM_MODE_FLAG_PHSYNC;
 147         else
 148                 flags |= DRM_MODE_FLAG_NHSYNC;
 149         if (tmp & DVO_VSYNC_ACTIVE_HIGH)
 150                 flags |= DRM_MODE_FLAG_PVSYNC;
 151         else
 152                 flags |= DRM_MODE_FLAG_NVSYNC;
 153
 154         pipe_config->adjusted_mode.flags |= flags;
 155
 156         pipe_config->adjusted_mode.crtc_clock = pipe_config->port_clock;
 157 }
 158
 159 static void intel_disable_dvo(struct intel_encoder *encoder)
 160 {
 161         struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
 162         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 163         u32 dvo_reg = intel_dvo->dev.dvo_reg;
 164         u32 temp = I915_READ(dvo_reg);
 165
 166         intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false);
 167         I915_WRITE(dvo_reg, temp & ~DVO_ENABLE);
 168         I915_READ(dvo_reg);
 169 }
 170
 171 static void intel_enable_dvo(struct intel_encoder *encoder)
 172 {
 173         struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
 174         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 175         struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
 176         u32 dvo_reg = intel_dvo->dev.dvo_reg;
 177         u32 temp = I915_READ(dvo_reg);
 178
 179         I915_WRITE(dvo_reg, temp | DVO_ENABLE);
 180         I915_READ(dvo_reg);
 181         intel_dvo->dev.dev_ops->mode_set(&intel_dvo->dev,
 182                                          &crtc->config.requested_mode,
 183                                          &crtc->config.adjusted_mode);
 184
 185         intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
 186 }
 187
 188 /* Special dpms function to support cloning between dvo/sdvo/crt. */
 189 static void intel_dvo_dpms(struct drm_connector *connector, int mode)
 190 {
 191         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 192         struct drm_crtc *crtc;
 193         struct intel_crtc_config *config;
 194
 195         /* dvo supports only 2 dpms states. */
 196         if (mode != DRM_MODE_DPMS_ON)
 197                 mode = DRM_MODE_DPMS_OFF;
 198
 199         if (mode == connector->dpms)
 200                 return;
 201
 202         connector->dpms = mode;
 203
 204         /* Only need to change hw state when actually enabled */
 205         crtc = intel_dvo->base.base.crtc;
 206         if (!crtc) {
 207                 intel_dvo->base.connectors_active = false;
 208                 return;
 209         }
 210
 211         /* We call connector dpms manually below in case pipe dpms doesn't
 212          * change due to cloning. */
 213         if (mode == DRM_MODE_DPMS_ON) {
 214                 config = &to_intel_crtc(crtc)->config;
 215
 216                 intel_dvo->base.connectors_active = true;
 217
 218                 intel_crtc_update_dpms(crtc);
 219
 220                 intel_dvo->dev.dev_ops->mode_set(&intel_dvo->dev,
 221                                                  &config->requested_mode,
 222                                                  &config->adjusted_mode);
 223
 224                 intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
 225         } else {
 226                 intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false);
 227
 228                 intel_dvo->base.connectors_active = false;
 229
 230                 intel_crtc_update_dpms(crtc);
 231         }
 232
 233         intel_modeset_check_state(connector->dev);
 234 }
 235
 236 static enum drm_mode_status
 237 intel_dvo_mode_valid(struct drm_connector *connector,
 238                      struct drm_display_mode *mode)
 239 {
 240         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 241
 242         if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 243                 return MODE_NO_DBLESCAN;
 244
 245         /* XXX: Validate clock range */
 246
 247         if (intel_dvo->panel_fixed_mode) {
 248                 if (mode->hdisplay > intel_dvo->panel_fixed_mode->hdisplay)
 249                         return MODE_PANEL;
 250                 if (mode->vdisplay > intel_dvo->panel_fixed_mode->vdisplay)
 251                         return MODE_PANEL;
 252         }
 253
 254         return intel_dvo->dev.dev_ops->mode_valid(&intel_dvo->dev, mode);
 255 }
 256
 257 static bool intel_dvo_compute_config(struct intel_encoder *encoder,
 258                                      struct intel_crtc_config *pipe_config)
 259 {
 260         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 261         struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
 262
 263         /* If we have timings from the BIOS for the panel, put them in
 264          * to the adjusted mode.  The CRTC will be set up for this mode,
 265          * with the panel scaling set up to source from the H/VDisplay
 266          * of the original mode.
 267          */
 268         if (intel_dvo->panel_fixed_mode != NULL) {
 269 #define C(x) adjusted_mode->x = intel_dvo->panel_fixed_mode->x
 270                 C(hdisplay);
 271                 C(hsync_start);
 272                 C(hsync_end);
 273                 C(htotal);
 274                 C(vdisplay);
 275                 C(vsync_start);
 276                 C(vsync_end);
 277                 C(vtotal);
 278                 C(clock);
 279 #undef C
 280
 281                 drm_mode_set_crtcinfo(adjusted_mode, 0);
 282         }
 283
 284         return true;
 285 }
 286
 287 static void intel_dvo_pre_enable(struct intel_encoder *encoder)
 288 {
 289         struct drm_device *dev = encoder->base.dev;
 290         struct drm_i915_private *dev_priv = dev->dev_private;
 291         struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
 292         struct drm_display_mode *adjusted_mode = &crtc->config.adjusted_mode;
 293         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 294         int pipe = crtc->pipe;
 295         u32 dvo_val;
 296         u32 dvo_reg = intel_dvo->dev.dvo_reg, dvo_srcdim_reg;
 297
 298         switch (dvo_reg) {
 299         case DVOA:
 300         default:
 301                 dvo_srcdim_reg = DVOA_SRCDIM;
 302                 break;
 303         case DVOB:
 304                 dvo_srcdim_reg = DVOB_SRCDIM;
 305                 break;
 306         case DVOC:
 307                 dvo_srcdim_reg = DVOC_SRCDIM;
 308                 break;
 309         }
 310
 311         /* Save the data order, since I don't know what it should be set to. */
 312         dvo_val = I915_READ(dvo_reg) &
 313                   (DVO_PRESERVE_MASK | DVO_DATA_ORDER_GBRG);
 314         dvo_val |= DVO_DATA_ORDER_FP | DVO_BORDER_ENABLE |
 315                    DVO_BLANK_ACTIVE_HIGH;
 316
 317         if (pipe == 1)
 318                 dvo_val |= DVO_PIPE_B_SELECT;
 319         dvo_val |= DVO_PIPE_STALL;
 320         if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
 321                 dvo_val |= DVO_HSYNC_ACTIVE_HIGH;
 322         if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
 323                 dvo_val |= DVO_VSYNC_ACTIVE_HIGH;
 324
 325         /*I915_WRITE(DVOB_SRCDIM,
 326           (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |
 327           (adjusted_mode->VDisplay << DVO_SRCDIM_VERTICAL_SHIFT));*/
 328         I915_WRITE(dvo_srcdim_reg,
 329                    (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |
 330                    (adjusted_mode->vdisplay << DVO_SRCDIM_VERTICAL_SHIFT));
 331         /*I915_WRITE(DVOB, dvo_val);*/
 332         I915_WRITE(dvo_reg, dvo_val);
 333 }
 334
 335 /**
 336  * Detect the output connection on our DVO device.
 337  *
 338  * Unimplemented.
 339  */
 340 static enum drm_connector_status
 341 intel_dvo_detect(struct drm_connector *connector, bool force)
 342 {
 343         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 344         DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
 345                       connector->base.id, connector->name);
 346         return intel_dvo->dev.dev_ops->detect(&intel_dvo->dev);
 347 }
 348
 349 static int intel_dvo_get_modes(struct drm_connector *connector)
 350 {
 351         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 352         struct drm_i915_private *dev_priv = connector->dev->dev_private;
 353
 354         /* We should probably have an i2c driver get_modes function for those
 355          * devices which will have a fixed set of modes determined by the chip
 356          * (TV-out, for example), but for now with just TMDS and LVDS,
 357          * that's not the case.
 358          */
 359         intel_ddc_get_modes(connector,
 360                             intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPC));
 361         if (!list_empty(&connector->probed_modes))
 362                 return 1;
 363
 364         if (intel_dvo->panel_fixed_mode != NULL) {
 365                 struct drm_display_mode *mode;
 366                 mode = drm_mode_duplicate(connector->dev, intel_dvo->panel_fixed_mode);
 367                 if (mode) {
 368                         drm_mode_probed_add(connector, mode);
 369                         return 1;
 370                 }
 371         }
 372
 373         return 0;
 374 }
 375
 376 static void intel_dvo_destroy(struct drm_connector *connector)
 377 {
 378         drm_connector_cleanup(connector);
 379         kfree(connector);
 380 }
 381
 382 static const struct drm_connector_funcs intel_dvo_connector_funcs = {
 383         .dpms = intel_dvo_dpms,
 384         .detect = intel_dvo_detect,
 385         .destroy = intel_dvo_destroy,
 386         .fill_modes = drm_helper_probe_single_connector_modes,
 387 };
 388
 389 static const struct drm_connector_helper_funcs intel_dvo_connector_helper_funcs = {
 390         .mode_valid = intel_dvo_mode_valid,
 391         .get_modes = intel_dvo_get_modes,
 392         .best_encoder = intel_best_encoder,
 393 };
 394
 395 static void intel_dvo_enc_destroy(struct drm_encoder *encoder)
 396 {
 397         struct intel_dvo *intel_dvo = enc_to_dvo(to_intel_encoder(encoder));
 398
 399         if (intel_dvo->dev.dev_ops->destroy)
 400                 intel_dvo->dev.dev_ops->destroy(&intel_dvo->dev);
 401
 402         kfree(intel_dvo->panel_fixed_mode);
 403
 404         intel_encoder_destroy(encoder);
 405 }
 406
 407 static const struct drm_encoder_funcs intel_dvo_enc_funcs = {
 408         .destroy = intel_dvo_enc_destroy,
 409 };
 410
 411 /**
 412  * Attempts to get a fixed panel timing for LVDS (currently only the i830).
 413  *
 414  * Other chips with DVO LVDS will need to extend this to deal with the LVDS
 415  * chip being on DVOB/C and having multiple pipes.
 416  */
 417 static struct drm_display_mode *
 418 intel_dvo_get_current_mode(struct drm_connector *connector)
 419 {
 420         struct drm_device *dev = connector->dev;
 421         struct drm_i915_private *dev_priv = dev->dev_private;
 422         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 423         uint32_t dvo_val = I915_READ(intel_dvo->dev.dvo_reg);
 424         struct drm_display_mode *mode = NULL;
 425
 426         /* If the DVO port is active, that'll be the LVDS, so we can pull out
 427          * its timings to get how the BIOS set up the panel.
 428          */
 429         if (dvo_val & DVO_ENABLE) {
 430                 struct drm_crtc *crtc;
 431                 int pipe = (dvo_val & DVO_PIPE_B_SELECT) ? 1 : 0;
 432
 433                 crtc = intel_get_crtc_for_pipe(dev, pipe);
 434                 if (crtc) {
 435                         mode = intel_crtc_mode_get(dev, crtc);
 436                         if (mode) {
 437                                 mode->type |= DRM_MODE_TYPE_PREFERRED;
 438                                 if (dvo_val & DVO_HSYNC_ACTIVE_HIGH)
 439                                         mode->flags |= DRM_MODE_FLAG_PHSYNC;
 440                                 if (dvo_val & DVO_VSYNC_ACTIVE_HIGH)
 441                                         mode->flags |= DRM_MODE_FLAG_PVSYNC;
 442                         }
 443                 }
 444         }
 445
 446         return mode;
 447 }
 448
 449 void intel_dvo_init(struct drm_device *dev)
 450 {
 451         struct drm_i915_private *dev_priv = dev->dev_private;
 452         struct intel_encoder *intel_encoder;
 453         struct intel_dvo *intel_dvo;
 454         struct intel_connector *intel_connector;
 455         int i;
 456         int encoder_type = DRM_MODE_ENCODER_NONE;
 457
 458         intel_dvo = kzalloc(sizeof(*intel_dvo), GFP_KERNEL);
 459         if (!intel_dvo)
 460                 return;
 461
 462         intel_connector = kzalloc(sizeof(*intel_connector), GFP_KERNEL);
 463         if (!intel_connector) {
 464                 kfree(intel_dvo);
 465                 return;
 466         }
 467
 468         intel_encoder = &intel_dvo->base;
 469         drm_encoder_init(dev, &intel_encoder->base,
 470                          &intel_dvo_enc_funcs, encoder_type);
 471
 472         intel_encoder->disable = intel_disable_dvo;
 473         intel_encoder->enable = intel_enable_dvo;
 474         intel_encoder->get_hw_state = intel_dvo_get_hw_state;
 475         intel_encoder->get_config = intel_dvo_get_config;
 476         intel_encoder->compute_config = intel_dvo_compute_config;
 477         intel_encoder->pre_enable = intel_dvo_pre_enable;
 478         intel_connector->get_hw_state = intel_dvo_connector_get_hw_state;
 479         intel_connector->unregister = intel_connector_unregister;
 480
 481         /* Now, try to find a controller */
 482         for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) {
 483                 struct drm_connector *connector = &intel_connector->base;
 484                 const struct intel_dvo_device *dvo = &intel_dvo_devices[i];
 485                 struct device *i2c;
 486                 int gpio;
 487                 bool dvoinit;
 488
 489                 /* Allow the I2C driver info to specify the GPIO to be used in
 490                  * special cases, but otherwise default to what's defined
 491                  * in the spec.
 492                  */
 493                 if (intel_gmbus_is_port_valid(dvo->gpio))
 494                         gpio = dvo->gpio;
 495                 else if (dvo->type == INTEL_DVO_CHIP_LVDS)
 496                         gpio = GMBUS_PORT_SSC;
 497                 else
 498                         gpio = GMBUS_PORT_DPB;
 499
 500                 /* Set up the I2C bus necessary for the chip we're probing.
 501                  * It appears that everything is on GPIOE except for panels
 502                  * on i830 laptops, which are on GPIOB (DVOA).
 503                  */
 504                 i2c = intel_gmbus_get_adapter(dev_priv, gpio);
 505
 506                 intel_dvo->dev = *dvo;
 507
 508                 /* GMBUS NAK handling seems to be unstable, hence let the
 509                  * transmitter detection run in bit banging mode for now.
 510                  */
 511                 intel_gmbus_force_bit(i2c, true);
 512
 513                 dvoinit = dvo->dev_ops->init(&intel_dvo->dev, i2c);
 514
 515                 intel_gmbus_force_bit(i2c, false);
 516
 517                 if (!dvoinit)
 518                         continue;
 519
 520                 intel_encoder->type = INTEL_OUTPUT_DVO;
 521                 intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
 522                 switch (dvo->type) {
 523                 case INTEL_DVO_CHIP_TMDS:
 524                         intel_encoder->cloneable = (1 << INTEL_OUTPUT_ANALOG) |
 525                                 (1 << INTEL_OUTPUT_DVO);
 526                         drm_connector_init(dev, connector,
 527                                            &intel_dvo_connector_funcs,
 528                                            DRM_MODE_CONNECTOR_DVII);
 529                         encoder_type = DRM_MODE_ENCODER_TMDS;
 530                         break;
 531                 case INTEL_DVO_CHIP_LVDS:
 532                         intel_encoder->cloneable = 0;
 533                         drm_connector_init(dev, connector,
 534                                            &intel_dvo_connector_funcs,
 535                                            DRM_MODE_CONNECTOR_LVDS);
 536                         encoder_type = DRM_MODE_ENCODER_LVDS;
 537                         break;
 538                 }
 539
 540                 drm_connector_helper_add(connector,
 541                                          &intel_dvo_connector_helper_funcs);
 542                 connector->display_info.subpixel_order = SubPixelHorizontalRGB;
 543                 connector->interlace_allowed = false;
 544                 connector->doublescan_allowed = false;
 545
 546                 intel_connector_attach_encoder(intel_connector, intel_encoder);
 547                 if (dvo->type == INTEL_DVO_CHIP_LVDS) {
 548                         /* For our LVDS chipsets, we should hopefully be able
 549                          * to dig the fixed panel mode out of the BIOS data.
 550                          * However, it's in a different format from the BIOS
 551                          * data on chipsets with integrated LVDS (stored in AIM
 552                          * headers, likely), so for now, just get the current
 553                          * mode being output through DVO.
 554                          */
 555                         intel_dvo->panel_fixed_mode =
 556                                 intel_dvo_get_current_mode(connector);
 557                         intel_dvo->panel_wants_dither = true;
 558                 }
 559
 560                 drm_connector_register(connector);
 561                 return;
 562         }
 563
 564         drm_encoder_cleanup(&intel_encoder->base);
 565         kfree(intel_dvo);
 566         kfree(intel_connector);
 567 }