in6_pcbbind: Move stack variable declaration near its usage
[dragonfly.git] / sys / netinet6 / in6_src.c
1 /*      $FreeBSD: src/sys/netinet6/in6_src.c,v 1.1.2.3 2002/02/26 18:02:06 ume Exp $    */
2 /*      $KAME: in6_src.c,v 1.37 2001/03/29 05:34:31 itojun Exp $        */
3
4 /*
5  * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  * 3. Neither the name of the project nor the names of its contributors
17  *    may be used to endorse or promote products derived from this software
18  *    without specific prior written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
21  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23  * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
24  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30  * SUCH DAMAGE.
31  */
32
33 /*
34  * Copyright (c) 1982, 1986, 1991, 1993
35  *      The Regents of the University of California.  All rights reserved.
36  *
37  * Redistribution and use in source and binary forms, with or without
38  * modification, are permitted provided that the following conditions
39  * are met:
40  * 1. Redistributions of source code must retain the above copyright
41  *    notice, this list of conditions and the following disclaimer.
42  * 2. Redistributions in binary form must reproduce the above copyright
43  *    notice, this list of conditions and the following disclaimer in the
44  *    documentation and/or other materials provided with the distribution.
45  * 3. Neither the name of the University nor the names of its contributors
46  *    may be used to endorse or promote products derived from this software
47  *    without specific prior written permission.
48  *
49  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
50  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
51  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
52  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
53  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
54  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
55  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
56  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
57  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
58  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
59  * SUCH DAMAGE.
60  *
61  *      @(#)in_pcb.c    8.2 (Berkeley) 1/4/94
62  */
63
64 #include "opt_inet.h"
65 #include "opt_inet6.h"
66
67 #include <sys/param.h>
68 #include <sys/systm.h>
69 #include <sys/jail.h>
70 #include <sys/kernel.h>
71 #include <sys/malloc.h>
72 #include <sys/mbuf.h>
73 #include <sys/protosw.h>
74 #include <sys/socket.h>
75 #include <sys/socketvar.h>
76 #include <sys/sockio.h>
77 #include <sys/sysctl.h>
78 #include <sys/errno.h>
79 #include <sys/time.h>
80 #include <sys/proc.h>
81 #include <sys/priv.h>
82
83 #include <net/if.h>
84 #include <net/route.h>
85
86 #include <netinet/in.h>
87 #include <netinet/in_var.h>
88 #include <netinet/in_systm.h>
89 #include <netinet/ip.h>
90 #include <netinet/in_pcb.h>
91 #include <netinet6/in6_var.h>
92 #include <netinet/ip6.h>
93 #include <netinet6/in6_pcb.h>
94 #include <netinet6/ip6_var.h>
95 #include <netinet6/nd6.h>
96 #ifdef ENABLE_DEFAULT_SCOPE
97 #include <netinet6/scope6_var.h>
98 #endif
99
100 #include <net/net_osdep.h>
101
102 #define ADDR_LABEL_NOTAPP (-1)
103 struct in6_addrpolicy defaultaddrpolicy;
104
105 static void     init_policy_queue(void);
106 static int      add_addrsel_policyent(struct in6_addrpolicy *);
107 static int      delete_addrsel_policyent(struct in6_addrpolicy *);
108 static int      walk_addrsel_policy(int (*)(struct in6_addrpolicy *, void *),
109                                     void *);
110 static int      dump_addrsel_policyent(struct in6_addrpolicy *, void *);
111
112
113 /*
114  * Return an IPv6 address, which is the most appropriate for a given
115  * destination and user specified options.
116  * If necessary, this function lookups the routing table and returns
117  * an entry to the caller for later use.
118  */
119 struct in6_addr *
120 in6_selectsrc(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
121               struct ip6_moptions *mopts, struct route_in6 *ro,
122               struct in6_addr *laddr, int *errorp, struct thread *td)
123 {
124         struct sockaddr_in6 jsin6;
125         struct ucred *cred = NULL;
126         struct in6_addr *dst;
127         struct in6_ifaddr *ia6 = NULL;
128         struct in6_pktinfo *pi = NULL;
129         int jailed = 0;
130
131         if (td && td->td_proc && td->td_proc->p_ucred)
132                 cred = td->td_proc->p_ucred;
133         if (cred && cred->cr_prison)
134                 jailed = 1;
135         jsin6.sin6_family = AF_INET6;
136         dst = &dstsock->sin6_addr;
137         *errorp = 0;
138
139         /*
140          * If the source address is explicitly specified by the caller,
141          * use it.
142          */
143         if (opts && (pi = opts->ip6po_pktinfo) &&
144             !IN6_IS_ADDR_UNSPECIFIED(&pi->ipi6_addr)) {
145                 jsin6.sin6_addr = pi->ipi6_addr;
146                 if (jailed && !jailed_ip(cred->cr_prison,
147                     (struct sockaddr *)&jsin6)) {
148                         return(0);
149                 } else {
150                         return (&pi->ipi6_addr);
151                 }
152         }
153
154         /*
155          * If the source address is not specified but the socket(if any)
156          * is already bound, use the bound address.
157          */
158         if (laddr && !IN6_IS_ADDR_UNSPECIFIED(laddr)) {
159                 jsin6.sin6_addr = *laddr;
160                 if (jailed && !jailed_ip(cred->cr_prison,
161                     (struct sockaddr *)&jsin6)) {
162                         return(0);
163                 } else {
164                         return (laddr);
165                 }
166         }
167
168         /*
169          * If the caller doesn't specify the source address but
170          * the outgoing interface, use an address associated with
171          * the interface.
172          */
173         if (pi && pi->ipi6_ifindex) {
174                 /* XXX boundary check is assumed to be already done. */
175                 ia6 = in6_ifawithscope(ifindex2ifnet[pi->ipi6_ifindex],
176                                        dst, cred);
177
178                 if (ia6 && jailed) {
179                         jsin6.sin6_addr = (&ia6->ia_addr)->sin6_addr;
180                         if (!jailed_ip(cred->cr_prison,
181                                 (struct sockaddr *)&jsin6))
182                                 ia6 = NULL;
183                 }
184
185                 if (ia6 == NULL) {
186                         *errorp = EADDRNOTAVAIL;
187                         return (0);
188                 }
189                 return (&satosin6(&ia6->ia_addr)->sin6_addr);
190         }
191
192         /*
193          * If the destination address is a link-local unicast address or
194          * a multicast address, and if the outgoing interface is specified
195          * by the sin6_scope_id filed, use an address associated with the
196          * interface.
197          * XXX: We're now trying to define more specific semantics of
198          *      sin6_scope_id field, so this part will be rewritten in
199          *      the near future.
200          */
201         if ((IN6_IS_ADDR_LINKLOCAL(dst) || IN6_IS_ADDR_MULTICAST(dst)) &&
202             dstsock->sin6_scope_id) {
203                 /*
204                  * I'm not sure if boundary check for scope_id is done
205                  * somewhere...
206                  */
207                 if (dstsock->sin6_scope_id < 0 ||
208                     if_index < dstsock->sin6_scope_id) {
209                         *errorp = ENXIO; /* XXX: better error? */
210                         return (0);
211                 }
212                 ia6 = in6_ifawithscope(ifindex2ifnet[dstsock->sin6_scope_id],
213                                        dst, cred);
214
215                 if (ia6 && jailed) {
216                         jsin6.sin6_addr = (&ia6->ia_addr)->sin6_addr;
217                         if (!jailed_ip(cred->cr_prison,
218                                 (struct sockaddr *)&jsin6))
219                                 ia6 = NULL;
220                 }
221
222                 if (ia6 == NULL) {
223                         *errorp = EADDRNOTAVAIL;
224                         return (0);
225                 }
226                 return (&satosin6(&ia6->ia_addr)->sin6_addr);
227         }
228
229         /*
230          * If the destination address is a multicast address and
231          * the outgoing interface for the address is specified
232          * by the caller, use an address associated with the interface.
233          * There is a sanity check here; if the destination has node-local
234          * scope, the outgoing interfacde should be a loopback address.
235          * Even if the outgoing interface is not specified, we also
236          * choose a loopback interface as the outgoing interface.
237          */
238         if (!jailed && IN6_IS_ADDR_MULTICAST(dst)) {
239                 struct ifnet *ifp = mopts ? mopts->im6o_multicast_ifp : NULL;
240
241                 if (ifp == NULL && IN6_IS_ADDR_MC_NODELOCAL(dst)) {
242                         ifp = &loif[0];
243                 }
244
245                 if (ifp) {
246                         ia6 = in6_ifawithscope(ifp, dst, cred);
247                         if (ia6 == NULL) {
248                                 *errorp = EADDRNOTAVAIL;
249                                 return (0);
250                         }
251                         return (&satosin6(&ia6->ia_addr)->sin6_addr);
252                 }
253         }
254
255         /*
256          * If the next hop address for the packet is specified
257          * by caller, use an address associated with the route
258          * to the next hop.
259          */
260         {
261                 struct sockaddr_in6 *sin6_next;
262                 struct rtentry *rt;
263
264                 if (opts && opts->ip6po_nexthop) {
265                         sin6_next = satosin6(opts->ip6po_nexthop);
266                         rt = nd6_lookup(&sin6_next->sin6_addr, 1, NULL);
267                         if (rt) {
268                                 ia6 = in6_ifawithscope(rt->rt_ifp, dst, cred);
269                                 if (ia6 == NULL)
270                                         ia6 = ifatoia6(rt->rt_ifa);
271                         }
272                         if (ia6 && jailed) {
273                                 jsin6.sin6_addr = (&ia6->ia_addr)->sin6_addr;
274                                 if (!jailed_ip(cred->cr_prison,
275                                         (struct sockaddr *)&jsin6))
276                                         ia6 = NULL;
277                         }
278
279                         if (ia6 == NULL) {
280                                 *errorp = EADDRNOTAVAIL;
281                                 return (0);
282                         }
283                         return (&satosin6(&ia6->ia_addr)->sin6_addr);
284                 }
285         }
286
287         /*
288          * If route is known or can be allocated now,
289          * our src addr is taken from the i/f, else punt.
290          */
291         if (ro) {
292                 if (ro->ro_rt &&
293                     (!(ro->ro_rt->rt_flags & RTF_UP) ||
294                      satosin6(&ro->ro_dst)->sin6_family != AF_INET6 ||
295                      !IN6_ARE_ADDR_EQUAL(&satosin6(&ro->ro_dst)->sin6_addr,
296                                          dst))) {
297                         RTFREE(ro->ro_rt);
298                         ro->ro_rt = NULL;
299                 }
300                 if (ro->ro_rt == NULL || ro->ro_rt->rt_ifp == NULL) {
301                         struct sockaddr_in6 *sa6;
302
303                         /* No route yet, so try to acquire one */
304                         bzero(&ro->ro_dst, sizeof(struct sockaddr_in6));
305                         sa6 = &ro->ro_dst;
306                         sa6->sin6_family = AF_INET6;
307                         sa6->sin6_len = sizeof(struct sockaddr_in6);
308                         sa6->sin6_addr = *dst;
309                         sa6->sin6_scope_id = dstsock->sin6_scope_id;
310                         if (!jailed && IN6_IS_ADDR_MULTICAST(dst)) {
311                                 ro->ro_rt =
312                                   rtpurelookup((struct sockaddr *)&ro->ro_dst);
313                         } else {
314                                 rtalloc((struct route *)ro);
315                         }
316                 }
317
318                 /*
319                  * in_pcbconnect() checks out IFF_LOOPBACK to skip using
320                  * the address. But we don't know why it does so.
321                  * It is necessary to ensure the scope even for lo0
322                  * so doesn't check out IFF_LOOPBACK.
323                  */
324
325                 if (ro->ro_rt) {
326                         ia6 = in6_ifawithscope(ro->ro_rt->rt_ifa->ifa_ifp, dst, cred);
327                         if (ia6 && jailed) {
328                                 jsin6.sin6_addr = (&ia6->ia_addr)->sin6_addr;
329                                 if (!jailed_ip(cred->cr_prison,
330                                         (struct sockaddr *)&jsin6))
331                                         ia6 = NULL;
332                         }
333
334                         if (ia6 == NULL) /* xxx scope error ?*/
335                                 ia6 = ifatoia6(ro->ro_rt->rt_ifa);
336
337                         if (ia6 && jailed) {
338                                 jsin6.sin6_addr = (&ia6->ia_addr)->sin6_addr;
339                                 if (!jailed_ip(cred->cr_prison,
340                                         (struct sockaddr *)&jsin6))
341                                         ia6 = NULL;
342                         }
343                 }
344 #if 0
345                 /*
346                  * xxx The followings are necessary? (kazu)
347                  * I don't think so.
348                  * It's for SO_DONTROUTE option in IPv4.(jinmei)
349                  */
350                 if (ia6 == 0) {
351                         struct sockaddr_in6 sin6 = {sizeof(sin6), AF_INET6, 0};
352
353                         sin6->sin6_addr = *dst;
354
355                         ia6 = ifatoia6(ifa_ifwithdstaddr(sin6tosa(&sin6)));
356                         if (ia6 == 0)
357                                 ia6 = ifatoia6(ifa_ifwithnet(sin6tosa(&sin6)));
358                         if (ia6 == 0)
359                                 return (0);
360                         return (&satosin6(&ia6->ia_addr)->sin6_addr);
361                 }
362 #endif /* 0 */
363                 if (ia6 == NULL) {
364                         *errorp = EHOSTUNREACH; /* no route */
365                         return (0);
366                 }
367                 return (&satosin6(&ia6->ia_addr)->sin6_addr);
368         }
369
370         *errorp = EADDRNOTAVAIL;
371         return (0);
372 }
373
374 /*
375  * Default hop limit selection. The precedence is as follows:
376  * 1. Hoplimit value specified via ioctl.
377  * 2. (If the outgoing interface is detected) the current
378  *     hop limit of the interface specified by router advertisement.
379  * 3. The system default hoplimit.
380 */
381 int
382 in6_selecthlim(struct in6pcb *in6p, struct ifnet *ifp)
383 {
384         if (in6p && in6p->in6p_hops >= 0)
385                 return (in6p->in6p_hops);
386         else if (ifp)
387                 return (ND_IFINFO(ifp)->chlim);
388         else
389                 return (ip6_defhlim);
390 }
391
392 /*
393  * XXX: this is borrowed from in6_pcbbind(). If possible, we should
394  * share this function by all *bsd*...
395  */
396 int
397 in6_pcbsetport(struct in6_addr *laddr, struct inpcb *inp, struct thread *td)
398 {
399         struct socket *so = inp->inp_socket;
400         u_int16_t lport = 0, first, last, *lastport;
401         int count, error = 0, wild = 0;
402         struct inpcbinfo *pcbinfo = inp->inp_pcbinfo;
403         struct ucred *cred = NULL;
404
405         /* XXX: this is redundant when called from in6_pcbbind */
406         if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT)) == 0)
407                 wild = INPLOOKUP_WILDCARD;
408         if (td->td_proc && td->td_proc->p_ucred)
409                 cred = td->td_proc->p_ucred;
410
411         inp->inp_flags |= INP_ANONPORT;
412
413         if (inp->inp_flags & INP_HIGHPORT) {
414                 first = ipport_hifirstauto;     /* sysctl */
415                 last  = ipport_hilastauto;
416                 lastport = &pcbinfo->lasthi;
417         } else if (inp->inp_flags & INP_LOWPORT) {
418                 if ((error = priv_check(td, PRIV_ROOT)) != 0)
419                         return error;
420                 first = ipport_lowfirstauto;    /* 1023 */
421                 last  = ipport_lowlastauto;     /* 600 */
422                 lastport = &pcbinfo->lastlow;
423         } else {
424                 first = ipport_firstauto;       /* sysctl */
425                 last  = ipport_lastauto;
426                 lastport = &pcbinfo->lastport;
427         }
428
429         /*
430          * This has to be atomic.  If the porthash is shared across multiple
431          * protocol threads (aka tcp) then the token will be non-NULL.
432          */
433         if (pcbinfo->porttoken)
434                 lwkt_gettoken(pcbinfo->porttoken);
435
436         /*
437          * Simple check to ensure all ports are not used up causing
438          * a deadlock here.
439          *
440          * We split the two cases (up and down) so that the direction
441          * is not being tested on each round of the loop.
442          */
443         if (first > last) {
444                 /*
445                  * counting down
446                  */
447                 count = first - last;
448
449                 do {
450                         if (count-- < 0) {      /* completely used? */
451                                 /*
452                                  * Undo any address bind that may have
453                                  * occurred above.
454                                  */
455                                 inp->in6p_laddr = kin6addr_any;
456                                 error = EAGAIN;
457                                 goto done;
458                         }
459                         --*lastport;
460                         if (*lastport > first || *lastport < last)
461                                 *lastport = first;
462                         lport = htons(*lastport);
463                 } while (in6_pcblookup_local(pcbinfo, &inp->in6p_laddr,
464                          lport, wild, cred));
465         } else {
466                 /*
467                  * counting up
468                  */
469                 count = last - first;
470
471                 do {
472                         if (count-- < 0) {      /* completely used? */
473                                 /*
474                                  * Undo any address bind that may have
475                                  * occurred above.
476                                  */
477                                 inp->in6p_laddr = kin6addr_any;
478                                 error = EAGAIN;
479                                 goto done;
480                         }
481                         ++*lastport;
482                         if (*lastport < first || *lastport > last)
483                                 *lastport = first;
484                         lport = htons(*lastport);
485                 } while (in6_pcblookup_local(pcbinfo, &inp->in6p_laddr,
486                          lport, wild, cred));
487         }
488
489         inp->inp_lport = lport;
490         in_pcbinsporthash(inp);
491         error = 0;
492 done:
493         if (pcbinfo->porttoken)
494                 lwkt_reltoken(pcbinfo->porttoken);
495         return error;
496 }
497
498 /*
499  * generate kernel-internal form (scopeid embedded into s6_addr16[1]).
500  * If the address scope of is link-local, embed the interface index in the
501  * address.  The routine determines our precedence
502  * between advanced API scope/interface specification and basic API
503  * specification.
504  *
505  * this function should be nuked in the future, when we get rid of
506  * embedded scopeid thing.
507  *
508  * XXX actually, it is over-specification to return ifp against sin6_scope_id.
509  * there can be multiple interfaces that belong to a particular scope zone
510  * (in specification, we have 1:N mapping between a scope zone and interfaces).
511  * we may want to change the function to return something other than ifp.
512  */
513 int
514 in6_embedscope(struct in6_addr *in6,
515                const struct sockaddr_in6 *sin6,
516 #ifdef HAVE_NRL_INPCB
517                struct inpcb *in6p,
518 #define in6p_outputopts inp_outputopts6
519 #define in6p_moptions   inp_moptions6
520 #else
521                struct in6pcb *in6p,
522 #endif
523                struct ifnet **ifpp)
524 {
525         struct ifnet *ifp = NULL;
526         u_int32_t scopeid;
527
528         *in6 = sin6->sin6_addr;
529         scopeid = sin6->sin6_scope_id;
530         if (ifpp)
531                 *ifpp = NULL;
532
533         /*
534          * don't try to read sin6->sin6_addr beyond here, since the caller may
535          * ask us to overwrite existing sockaddr_in6
536          */
537
538 #ifdef ENABLE_DEFAULT_SCOPE
539         if (scopeid == 0)
540                 scopeid = scope6_addr2default(in6);
541 #endif
542
543         if (IN6_IS_SCOPE_LINKLOCAL(in6)) {
544                 struct in6_pktinfo *pi;
545
546                 /*
547                  * KAME assumption: link id == interface id
548                  */
549
550                 if (in6p && in6p->in6p_outputopts &&
551                     (pi = in6p->in6p_outputopts->ip6po_pktinfo) &&
552                     pi->ipi6_ifindex) {
553                         ifp = ifindex2ifnet[pi->ipi6_ifindex];
554                         in6->s6_addr16[1] = htons(pi->ipi6_ifindex);
555                 } else if (in6p && IN6_IS_ADDR_MULTICAST(in6) &&
556                            in6p->in6p_moptions &&
557                            in6p->in6p_moptions->im6o_multicast_ifp) {
558                         ifp = in6p->in6p_moptions->im6o_multicast_ifp;
559                         in6->s6_addr16[1] = htons(ifp->if_index);
560                 } else if (scopeid) {
561                         /* boundary check */
562                         if (scopeid < 0 || if_index < scopeid)
563                                 return ENXIO;  /* XXX EINVAL? */
564                         ifp = ifindex2ifnet[scopeid];
565                         /*XXX assignment to 16bit from 32bit variable */
566                         in6->s6_addr16[1] = htons(scopeid & 0xffff);
567                 }
568
569                 if (ifpp)
570                         *ifpp = ifp;
571         }
572
573         return 0;
574 }
575 #ifdef HAVE_NRL_INPCB
576 #undef in6p_outputopts
577 #undef in6p_moptions
578 #endif
579
580 /*
581  * generate standard sockaddr_in6 from embedded form.
582  * touches sin6_addr and sin6_scope_id only.
583  *
584  * this function should be nuked in the future, when we get rid of
585  * embedded scopeid thing.
586  */
587 int
588 in6_recoverscope(struct sockaddr_in6 *sin6, const struct in6_addr *in6,
589                  struct ifnet *ifp)
590 {
591         u_int32_t scopeid;
592
593         sin6->sin6_addr = *in6;
594
595         /*
596          * don't try to read *in6 beyond here, since the caller may
597          * ask us to overwrite existing sockaddr_in6
598          */
599
600         sin6->sin6_scope_id = 0;
601         if (IN6_IS_SCOPE_LINKLOCAL(in6)) {
602                 /*
603                  * KAME assumption: link id == interface id
604                  */
605                 scopeid = ntohs(sin6->sin6_addr.s6_addr16[1]);
606                 if (scopeid) {
607                         /* sanity check */
608                         if (scopeid < 0 || if_index < scopeid)
609                                 return ENXIO;
610                         if (ifp && ifp->if_index != scopeid)
611                                 return ENXIO;
612                         sin6->sin6_addr.s6_addr16[1] = 0;
613                         sin6->sin6_scope_id = scopeid;
614                 }
615         }
616
617         return 0;
618 }
619
620 /*
621  * just clear the embedded scope identifer.
622  * XXX: currently used for bsdi4 only as a supplement function.
623  */
624 void
625 in6_clearscope(struct in6_addr *addr)
626 {
627         if (IN6_IS_SCOPE_LINKLOCAL(addr))
628                 addr->s6_addr16[1] = 0;
629 }
630
631 void
632 addrsel_policy_init(void)
633 {
634
635         init_policy_queue();
636
637         /* initialize the "last resort" policy */
638         bzero(&defaultaddrpolicy, sizeof(defaultaddrpolicy));
639         defaultaddrpolicy.label = ADDR_LABEL_NOTAPP;
640 }
641
642 /*
643  * Subroutines to manage the address selection policy table via sysctl.
644  */
645 struct walkarg {
646         struct sysctl_req *w_req;
647 };
648
649 static int in6_src_sysctl(SYSCTL_HANDLER_ARGS);
650 SYSCTL_DECL(_net_inet6_ip6);
651 SYSCTL_NODE(_net_inet6_ip6, IPV6CTL_ADDRCTLPOLICY, addrctlpolicy,
652         CTLFLAG_RD, in6_src_sysctl, "Address selection policy");
653
654 static int
655 in6_src_sysctl(SYSCTL_HANDLER_ARGS)
656 {
657         struct walkarg w;
658
659         if (req->newptr)
660                 return EPERM;
661
662         bzero(&w, sizeof(w));
663         w.w_req = req;
664
665         return (walk_addrsel_policy(dump_addrsel_policyent, &w));
666 }
667
668 int
669 in6_src_ioctl(u_long cmd, caddr_t data)
670 {
671         int i;
672         struct in6_addrpolicy ent0;
673
674         if (cmd != SIOCAADDRCTL_POLICY && cmd != SIOCDADDRCTL_POLICY)
675                 return (EOPNOTSUPP); /* check for safety */
676
677         ent0 = *(struct in6_addrpolicy *)data;
678
679         if (ent0.label == ADDR_LABEL_NOTAPP)
680                 return (EINVAL);
681         /* check if the prefix mask is consecutive. */
682         if (in6_mask2len(&ent0.addrmask.sin6_addr, NULL) < 0)
683                 return (EINVAL);
684         /* clear trailing garbages (if any) of the prefix address. */
685         for (i = 0; i < 4; i++) {
686                 ent0.addr.sin6_addr.s6_addr32[i] &=
687                         ent0.addrmask.sin6_addr.s6_addr32[i];
688         }
689         ent0.use = 0;
690
691         switch (cmd) {
692         case SIOCAADDRCTL_POLICY:
693                 return (add_addrsel_policyent(&ent0));
694         case SIOCDADDRCTL_POLICY:
695                 return (delete_addrsel_policyent(&ent0));
696         }
697
698         return (0);             /* XXX: compromise compilers */
699 }
700
701 /*
702  * The followings are implementation of the policy table using a
703  * simple tail queue.
704  * XXX such details should be hidden.
705  * XXX implementation using binary tree should be more efficient.
706  */
707 struct addrsel_policyent {
708         TAILQ_ENTRY(addrsel_policyent) ape_entry;
709         struct in6_addrpolicy ape_policy;
710 };
711
712 TAILQ_HEAD(addrsel_policyhead, addrsel_policyent);
713
714 struct addrsel_policyhead addrsel_policytab;
715
716 static void
717 init_policy_queue(void)
718 {
719         TAILQ_INIT(&addrsel_policytab);
720 }
721
722 static int
723 add_addrsel_policyent(struct in6_addrpolicy *newpolicy)
724 {
725         struct addrsel_policyent *new, *pol;
726
727         /* duplication check */
728         for (pol = TAILQ_FIRST(&addrsel_policytab); pol;
729              pol = TAILQ_NEXT(pol, ape_entry)) {
730                 if (SA6_ARE_ADDR_EQUAL(&newpolicy->addr,
731                                        &pol->ape_policy.addr) &&
732                     SA6_ARE_ADDR_EQUAL(&newpolicy->addrmask,
733                                        &pol->ape_policy.addrmask)) {
734                         return (EEXIST);        /* or override it? */
735                 }
736         }
737
738         new = kmalloc(sizeof(*new), M_IFADDR, M_WAITOK | M_ZERO);
739
740         /* XXX: should validate entry */
741         new->ape_policy = *newpolicy;
742
743         TAILQ_INSERT_TAIL(&addrsel_policytab, new, ape_entry);
744
745         return (0);
746 }
747
748 static int
749 delete_addrsel_policyent(struct in6_addrpolicy *key)
750 {
751         struct addrsel_policyent *pol;
752
753         /* search for the entry in the table */
754         for (pol = TAILQ_FIRST(&addrsel_policytab); pol;
755              pol = TAILQ_NEXT(pol, ape_entry)) {
756                 if (SA6_ARE_ADDR_EQUAL(&key->addr, &pol->ape_policy.addr) &&
757                     SA6_ARE_ADDR_EQUAL(&key->addrmask,
758                                        &pol->ape_policy.addrmask)) {
759                         break;
760                 }
761         }
762         if (pol == NULL)
763                 return (ESRCH);
764
765         TAILQ_REMOVE(&addrsel_policytab, pol, ape_entry);
766         kfree(pol, M_IFADDR);
767
768         return (0);
769 }
770
771 static int
772 walk_addrsel_policy(int(*callback)(struct in6_addrpolicy *, void *), void *w)
773 {
774         struct addrsel_policyent *pol;
775         int error = 0;
776
777         for (pol = TAILQ_FIRST(&addrsel_policytab); pol;
778              pol = TAILQ_NEXT(pol, ape_entry)) {
779                 if ((error = (*callback)(&pol->ape_policy, w)) != 0)
780                         return (error);
781         }
782
783         return (error);
784 }
785
786 static int
787 dump_addrsel_policyent(struct in6_addrpolicy *pol, void *arg)
788 {
789         int error = 0;
790         struct walkarg *w = arg;
791
792         error = SYSCTL_OUT(w->w_req, pol, sizeof(*pol));
793
794         return (error);
795 }