e89778ffb2e98771424b567167b8b84755dad937
[dragonfly.git] / usr.sbin / 802_11 / hostapd / hostapd.conf.5
1 .\" Copyright (c) 2005 Sam Leffler <sam@errno.com>
2 .\" Copyright (c) 2006 Rui Paulo
3 .\" All rights reserved.
4 .\"
5 .\" Redistribution and use in source and binary forms, with or without
6 .\" modification, are permitted provided that the following conditions
7 .\" are met:
8 .\" 1. Redistributions of source code must retain the above copyright
9 .\"    notice, this list of conditions and the following disclaimer.
10 .\" 2. Redistributions in binary form must reproduce the above copyright
11 .\"    notice, this list of conditions and the following disclaimer in the
12 .\"    documentation and/or other materials provided with the distribution.
13 .\"
14 .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 .\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 .\" SUCH DAMAGE.
25 .\"
26 .\" $FreeBSD: head/usr.sbin/wpa/hostapd/hostapd.conf.5 235499 2012-05-16 01:59:09Z gjb $
27 .\"
28 .Dd September 2, 2006
29 .Dt HOSTAPD.CONF 5
30 .Os
31 .Sh NAME
32 .Nm hostapd.conf
33 .Nd configuration file for
34 .Xr hostapd 8
35 utility
36 .Sh DESCRIPTION
37 The
38 .Xr hostapd 8
39 utility
40 is an authenticator for IEEE 802.11 networks.
41 It provides full support for WPA/IEEE 802.11i and
42 can also act as an IEEE 802.1X Authenticator with a suitable
43 backend Authentication Server (typically
44 .Tn FreeRADIUS ) .
45 .Pp
46 The configuration file consists of global parameters and domain
47 specific configuration:
48 .Bl -bullet -offset indent -compact
49 .It
50 IEEE 802.1X-2004
51 .\" XXX not yet
52 .\" .It
53 .\" Integrated EAP server
54 .\" .It
55 .\" IEEE 802.11f - Inter-Access Point Protocol (IAPP)
56 .It
57 RADIUS client
58 .It
59 RADIUS authentication server
60 .It
61 WPA/IEEE 802.11i
62 .El
63 .Sh GLOBAL PARAMETERS
64 The following parameters are recognized:
65 .Bl -tag -width indent
66 .It Va interface
67 Interface name.
68 Should be set in
69 .Dq hostap
70 mode.  Make certain that there are no spaces after the interface name,
71 or hostapd will complain that the interface does not exist.
72 .It Va debug
73 Debugging mode: 0 = no, 1 = minimal, 2 = verbose, 3 = msg dumps, 4 =
74 excessive.
75 .It Va dump_file
76 Dump file for state information (on
77 .Dv SIGUSR1 ) .
78 .It Va ctrl_interface
79 The pathname of the directory in which
80 .Xr hostapd 8
81 creates
82 .Ux
83 domain socket files for communication
84 with frontend programs such as
85 .Xr hostapd_cli 8 .
86 .It Va ctrl_interface_group
87 A group name or group ID to use in setting protection on the
88 control interface file.
89 This can be set to allow non-root users to access the
90 control interface files.
91 If no group is specified, the group ID of the control interface
92 is not modified and will, typically, be the
93 group ID of the directory in which the socket is created.
94 .El
95 .Sh IEEE 802.1X-2004 PARAMETERS
96 The following parameters are recognized:
97 .Bl -tag -width indent
98 .It Va ieee8021x
99 Require IEEE 802.1X authorization.
100 .It Va eap_message
101 Optional displayable message sent with EAP Request-Identity.
102 .It Va wep_key_len_broadcast
103 Key lengths for broadcast keys.
104 .It Va wep_key_len_unicast
105 Key lengths for unicast keys.
106 .It Va wep_rekey_period
107 Rekeying period in seconds.
108 .It Va eapol_key_index_workaround
109 EAPOL-Key index workaround (set bit7) for WinXP Supplicant.
110 .It Va eap_reauth_period
111 EAP reauthentication period in seconds.
112 To disable reauthentication,
113 use
114 .Dq 0 .
115 .\" XXX not yet
116 .\" .It Va use_pae_group_addr
117 .El
118 .\" XXX not yet
119 .\" .Sh IEEE 802.11f - IAPP PARAMETERS
120 .\" The following parameters are recognized:
121 .\" .Bl -tag -width indent
122 .\" .It Va iapp_interface
123 .\" Interface to be used for IAPP broadcast packets
124 .\" .El
125 .Sh RADIUS CLIENT PARAMETERS
126 The following parameters are recognized:
127 .Bl -tag -width indent
128 .It Va own_ip_addr
129 The own IP address of the access point (used as NAS-IP-Address).
130 .It Va nas_identifier
131 Optional NAS-Identifier string for RADIUS messages.
132 .It Va auth_server_addr , auth_server_port , auth_server_shared_secret
133 RADIUS authentication server parameters.
134 Can be defined twice for secondary servers to be used if primary one
135 does not reply to RADIUS packets.
136 .It Va acct_server_addr , acct_server_port , acct_server_shared_secret
137 RADIUS accounting server parameters.
138 Can be defined twice for secondary servers to be used if primary one
139 does not reply to RADIUS packets.
140 .It Va radius_retry_primary_interval
141 Retry interval for trying to return to the primary RADIUS server (in
142 seconds).
143 .It Va radius_acct_interim_interval
144 Interim accounting update interval.
145 If this is set (larger than 0) and acct_server is configured,
146 .Xr hostapd 8
147 will send interim accounting updates every N seconds.
148 .El
149 .Sh RADIUS AUTHENTICATION SERVER PARAMETERS
150 The following parameters are recognized:
151 .Bl -tag -width indent
152 .It Va radius_server_clients
153 File name of the RADIUS clients configuration for the RADIUS server.
154 If this is commented out, RADIUS server is disabled.
155 .It Va radius_server_auth_port
156 The UDP port number for the RADIUS authentication server.
157 .It Va radius_server_ipv6
158 Use IPv6 with RADIUS server.
159 .El
160 .Sh WPA/IEEE 802.11i PARAMETERS
161 The following parameters are recognized:
162 .Bl -tag -width indent
163 .It Va wpa
164 Enable WPA.
165 Setting this variable configures the AP to require WPA (either
166 WPA-PSK or WPA-RADIUS/EAP based on other configuration).
167 .It Va wpa_psk , wpa_passphrase
168 WPA pre-shared keys for WPA-PSK.
169 This can be either entered as a 256-bit secret in hex format (64 hex
170 digits), wpa_psk, or as an ASCII passphrase (8..63 characters) that
171 will be converted to PSK.
172 This conversion uses SSID so the PSK changes when ASCII passphrase is
173 used and the SSID is changed.
174 .It Va wpa_psk_file
175 Optionally, WPA PSKs can be read from a separate text file containing a
176 list of PSK and MAC address pairs.
177 .It Va wpa_key_mgmt
178 Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both).
179 .It Va wpa_pairwise
180 Set of accepted cipher suites (encryption algorithms) for pairwise keys
181 (unicast packets).
182 See the example file for more information.
183 .It Va wpa_group_rekey
184 Time interval for rekeying GTK (broadcast/multicast encryption keys) in
185 seconds.
186 .It Va wpa_strict_rekey
187 Rekey GTK when any STA that possesses the current GTK is leaving the
188 BSS.
189 .It Va wpa_gmk_rekey
190 Time interval for rekeying GMK (master key used internally to generate GTKs),
191 in seconds.
192 .El
193 .Sh SEE ALSO
194 .Xr hostapd 8 ,
195 .Xr hostapd_cli 8
196 .Sh HISTORY
197 The
198 .Nm
199 manual page and
200 .Xr hostapd 8
201 functionality first appeared in
202 .Fx 6.0 .
203 .Sh AUTHORS
204 This manual page is derived from the
205 .Pa README
206 and
207 .Pa hostapd.conf
208 files in the
209 .Nm hostapd
210 distribution provided by
211 .An Jouni Malinen Aq Mt j@w1.fi .