crypto/openssl/ssl/s3_pkt.c

   1 /* ssl/s3_pkt.c */
   2 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
   3  * All rights reserved.
   4  *
   5  * This package is an SSL implementation written
   6  * by Eric Young (eay@cryptsoft.com).
   7  * The implementation was written so as to conform with Netscapes SSL.
   8  *
   9  * This library is free for commercial and non-commercial use as long as
  10  * the following conditions are aheared to.  The following conditions
  11  * apply to all code found in this distribution, be it the RC4, RSA,
  12  * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
  13  * included with this distribution is covered by the same copyright terms
  14  * except that the holder is Tim Hudson (tjh@cryptsoft.com).
  15  *
  16  * Copyright remains Eric Young's, and as such any Copyright notices in
  17  * the code are not to be removed.
  18  * If this package is used in a product, Eric Young should be given attribution
  19  * as the author of the parts of the library used.
  20  * This can be in the form of a textual message at program startup or
  21  * in documentation (online or textual) provided with the package.
  22  *
  23  * Redistribution and use in source and binary forms, with or without
  24  * modification, are permitted provided that the following conditions
  25  * are met:
  26  * 1. Redistributions of source code must retain the copyright
  27  *    notice, this list of conditions and the following disclaimer.
  28  * 2. Redistributions in binary form must reproduce the above copyright
  29  *    notice, this list of conditions and the following disclaimer in the
  30  *    documentation and/or other materials provided with the distribution.
  31  * 3. All advertising materials mentioning features or use of this software
  32  *    must display the following acknowledgement:
  33  *    "This product includes cryptographic software written by
  34  *     Eric Young (eay@cryptsoft.com)"
  35  *    The word 'cryptographic' can be left out if the rouines from the library
  36  *    being used are not cryptographic related :-).
  37  * 4. If you include any Windows specific code (or a derivative thereof) from
  38  *    the apps directory (application code) you must include an acknowledgement:
  39  *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
  40  *
  41  * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
  42  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  43  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  44  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  45  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  46  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  47  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  48  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  49  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  50  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  51  * SUCH DAMAGE.
  52  *
  53  * The licence and distribution terms for any publically available version or
  54  * derivative of this code cannot be changed.  i.e. this code cannot simply be
  55  * copied and put under another distribution licence
  56  * [including the GNU Public Licence.]
  57  */
  58 /* ====================================================================
  59  * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
  60  *
  61  * Redistribution and use in source and binary forms, with or without
  62  * modification, are permitted provided that the following conditions
  63  * are met:
  64  *
  65  * 1. Redistributions of source code must retain the above copyright
  66  *    notice, this list of conditions and the following disclaimer.
  67  *
  68  * 2. Redistributions in binary form must reproduce the above copyright
  69  *    notice, this list of conditions and the following disclaimer in
  70  *    the documentation and/or other materials provided with the
  71  *    distribution.
  72  *
  73  * 3. All advertising materials mentioning features or use of this
  74  *    software must display the following acknowledgment:
  75  *    "This product includes software developed by the OpenSSL Project
  76  *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
  77  *
  78  * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
  79  *    endorse or promote products derived from this software without
  80  *    prior written permission. For written permission, please contact
  81  *    openssl-core@openssl.org.
  82  *
  83  * 5. Products derived from this software may not be called "OpenSSL"
  84  *    nor may "OpenSSL" appear in their names without prior written
  85  *    permission of the OpenSSL Project.
  86  *
  87  * 6. Redistributions of any form whatsoever must retain the following
  88  *    acknowledgment:
  89  *    "This product includes software developed by the OpenSSL Project
  90  *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
  91  *
  92  * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
  93  * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  94  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  95  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
  96  * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  97  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  98  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  99  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 100  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 101  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 102  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 103  * OF THE POSSIBILITY OF SUCH DAMAGE.
 104  * ====================================================================
 105  *
 106  * This product includes cryptographic software written by Eric Young
 107  * (eay@cryptsoft.com).  This product includes software written by Tim
 108  * Hudson (tjh@cryptsoft.com).
 109  *
 110  */
 111
 112 #include <stdio.h>
 113 #include <errno.h>
 114 #define USE_SOCKETS
 115 #include "ssl_locl.h"
 116 #include <openssl/evp.h>
 117 #include <openssl/buffer.h>
 118 #include <openssl/rand.h>
 119
 120 static int do_ssl3_write(SSL *s, int type, const unsigned char *buf,
 121                          unsigned int len, int create_empty_fragment);
 122 static int ssl3_get_record(SSL *s);
 123
 124 int ssl3_read_n(SSL *s, int n, int max, int extend)
 125         {
 126         /* If extend == 0, obtain new n-byte packet; if extend == 1, increase
 127          * packet by another n bytes.
 128          * The packet will be in the sub-array of s->s3->rbuf.buf specified
 129          * by s->packet and s->packet_length.
 130          * (If s->read_ahead is set, 'max' bytes may be stored in rbuf
 131          * [plus s->packet_length bytes if extend == 1].)
 132          */
 133         int i,len,left;
 134         long align=0;
 135         unsigned char *pkt;
 136         SSL3_BUFFER *rb;
 137
 138         if (n <= 0) return n;
 139
 140         rb    = &(s->s3->rbuf);
 141         if (rb->buf == NULL)
 142                 if (!ssl3_setup_read_buffer(s))
 143                         return -1;
 144
 145         left  = rb->left;
 146 #if defined(SSL3_ALIGN_PAYLOAD) && SSL3_ALIGN_PAYLOAD!=0
 147         align = (long)rb->buf + SSL3_RT_HEADER_LENGTH;
 148         align = (-align)&(SSL3_ALIGN_PAYLOAD-1);
 149 #endif
 150
 151         if (!extend)
 152                 {
 153                 /* start with empty packet ... */
 154                 if (left == 0)
 155                         rb->offset = align;
 156                 else if (align != 0 && left >= SSL3_RT_HEADER_LENGTH)
 157                         {
 158                         /* check if next packet length is large
 159                          * enough to justify payload alignment... */
 160                         pkt = rb->buf + rb->offset;
 161                         if (pkt[0] == SSL3_RT_APPLICATION_DATA
 162                             && (pkt[3]<<8|pkt[4]) >= 128)
 163                                 {
 164                                 /* Note that even if packet is corrupted
 165                                  * and its length field is insane, we can
 166                                  * only be led to wrong decision about
 167                                  * whether memmove will occur or not.
 168                                  * Header values has no effect on memmove
 169                                  * arguments and therefore no buffer
 170                                  * overrun can be triggered. */
 171                                 memmove (rb->buf+align,pkt,left);
 172                                 rb->offset = align;
 173                                 }
 174                         }
 175                 s->packet = rb->buf + rb->offset;
 176                 s->packet_length = 0;
 177                 /* ... now we can act as if 'extend' was set */
 178                 }
 179
 180         /* For DTLS/UDP reads should not span multiple packets
 181          * because the read operation returns the whole packet
 182          * at once (as long as it fits into the buffer). */
 183         if (SSL_version(s) == DTLS1_VERSION || SSL_version(s) == DTLS1_BAD_VER)
 184                 {
 185                 if (left > 0 && n > left)
 186                         n = left;
 187                 }
 188
 189         /* if there is enough in the buffer from a previous read, take some */
 190         if (left >= n)
 191                 {
 192                 s->packet_length+=n;
 193                 rb->left=left-n;
 194                 rb->offset+=n;
 195                 return(n);
 196                 }
 197
 198         /* else we need to read more data */
 199
 200         len = s->packet_length;
 201         pkt = rb->buf+align;
 202         /* Move any available bytes to front of buffer:
 203          * 'len' bytes already pointed to by 'packet',
 204          * 'left' extra ones at the end */
 205         if (s->packet != pkt) /* len > 0 */
 206                 {
 207                 memmove(pkt, s->packet, len+left);
 208                 s->packet = pkt;
 209                 rb->offset = len + align;
 210                 }
 211
 212         if (n > (int)(rb->len - rb->offset)) /* does not happen */
 213                 {
 214                 SSLerr(SSL_F_SSL3_READ_N,ERR_R_INTERNAL_ERROR);
 215                 return -1;
 216                 }
 217
 218         if (!s->read_ahead)
 219                 /* ignore max parameter */
 220                 max = n;
 221         else
 222                 {
 223                 if (max < n)
 224                         max = n;
 225                 if (max > (int)(rb->len - rb->offset))
 226                         max = rb->len - rb->offset;
 227                 }
 228
 229         while (left < n)
 230                 {
 231                 /* Now we have len+left bytes at the front of s->s3->rbuf.buf
 232                  * and need to read in more until we have len+n (up to
 233                  * len+max if possible) */
 234
 235                 clear_sys_error();
 236                 if (s->rbio != NULL)
 237                         {
 238                         s->rwstate=SSL_READING;
 239                         i=BIO_read(s->rbio,pkt+len+left, max-left);
 240                         }
 241                 else
 242                         {
 243                         SSLerr(SSL_F_SSL3_READ_N,SSL_R_READ_BIO_NOT_SET);
 244                         i = -1;
 245                         }
 246
 247                 if (i <= 0)
 248                         {
 249                         rb->left = left;
 250                         if (s->mode & SSL_MODE_RELEASE_BUFFERS &&
 251                             SSL_version(s) != DTLS1_VERSION && SSL_version(s) != DTLS1_BAD_VER)
 252                                 if (len+left == 0)
 253                                         ssl3_release_read_buffer(s);
 254                         return(i);
 255                         }
 256                 left+=i;
 257                 /* reads should *never* span multiple packets for DTLS because
 258                  * the underlying transport protocol is message oriented as opposed
 259                  * to byte oriented as in the TLS case. */
 260                 if (SSL_version(s) == DTLS1_VERSION || SSL_version(s) == DTLS1_BAD_VER)
 261                         {
 262                         if (n > left)
 263                                 n = left; /* makes the while condition false */
 264                         }
 265                 }
 266
 267         /* done reading, now the book-keeping */
 268         rb->offset += n;
 269         rb->left = left - n;
 270         s->packet_length += n;
 271         s->rwstate=SSL_NOTHING;
 272         return(n);
 273         }
 274
 275 /* Call this to get a new input record.
 276  * It will return <= 0 if more data is needed, normally due to an error
 277  * or non-blocking IO.
 278  * When it finishes, one packet has been decoded and can be found in
 279  * ssl->s3->rrec.type    - is the type of record
 280  * ssl->s3->rrec.data,   - data
 281  * ssl->s3->rrec.length, - number of bytes
 282  */
 283 /* used only by ssl3_read_bytes */
 284 static int ssl3_get_record(SSL *s)
 285         {
 286         int ssl_major,ssl_minor,al;
 287         int enc_err,n,i,ret= -1;
 288         SSL3_RECORD *rr;
 289         SSL_SESSION *sess;
 290         unsigned char *p;
 291         unsigned char md[EVP_MAX_MD_SIZE];
 292         short version;
 293         unsigned mac_size, orig_len;
 294         size_t extra;
 295
 296         rr= &(s->s3->rrec);
 297         sess=s->session;
 298
 299         if (s->options & SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER)
 300                 extra=SSL3_RT_MAX_EXTRA;
 301         else
 302                 extra=0;
 303         if (extra && !s->s3->init_extra)
 304                 {
 305                 /* An application error: SLS_OP_MICROSOFT_BIG_SSLV3_BUFFER
 306                  * set after ssl3_setup_buffers() was done */
 307                 SSLerr(SSL_F_SSL3_GET_RECORD, ERR_R_INTERNAL_ERROR);
 308                 return -1;
 309                 }
 310
 311 again:
 312         /* check if we have the header */
 313         if (    (s->rstate != SSL_ST_READ_BODY) ||
 314                 (s->packet_length < SSL3_RT_HEADER_LENGTH))
 315                 {
 316                 n=ssl3_read_n(s, SSL3_RT_HEADER_LENGTH, s->s3->rbuf.len, 0);
 317                 if (n <= 0) return(n); /* error or non-blocking */
 318                 s->rstate=SSL_ST_READ_BODY;
 319
 320                 p=s->packet;
 321
 322                 /* Pull apart the header into the SSL3_RECORD */
 323                 rr->type= *(p++);
 324                 ssl_major= *(p++);
 325                 ssl_minor= *(p++);
 326                 version=(ssl_major<<8)|ssl_minor;
 327                 n2s(p,rr->length);
 328 #if 0
 329 fprintf(stderr, "Record type=%d, Length=%d\n", rr->type, rr->length);
 330 #endif
 331
 332                 /* Lets check version */
 333                 if (!s->first_packet)
 334                         {
 335                         if (version != s->version)
 336                                 {
 337                                 SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_WRONG_VERSION_NUMBER);
 338                                 if ((s->version & 0xFF00) == (version & 0xFF00))
 339                                         /* Send back error using their minor version number :-) */
 340                                         s->version = (unsigned short)version;
 341                                 al=SSL_AD_PROTOCOL_VERSION;
 342                                 goto f_err;
 343                                 }
 344                         }
 345
 346                 if ((version>>8) != SSL3_VERSION_MAJOR)
 347                         {
 348                         SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_WRONG_VERSION_NUMBER);
 349                         goto err;
 350                         }
 351
 352                 if (rr->length > s->s3->rbuf.len - SSL3_RT_HEADER_LENGTH)
 353                         {
 354                         al=SSL_AD_RECORD_OVERFLOW;
 355                         SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_PACKET_LENGTH_TOO_LONG);
 356                         goto f_err;
 357                         }
 358
 359                 /* now s->rstate == SSL_ST_READ_BODY */
 360                 }
 361
 362         /* s->rstate == SSL_ST_READ_BODY, get and decode the data */
 363
 364         if (rr->length > s->packet_length-SSL3_RT_HEADER_LENGTH)
 365                 {
 366                 /* now s->packet_length == SSL3_RT_HEADER_LENGTH */
 367                 i=rr->length;
 368                 n=ssl3_read_n(s,i,i,1);
 369                 if (n <= 0) return(n); /* error or non-blocking io */
 370                 /* now n == rr->length,
 371                  * and s->packet_length == SSL3_RT_HEADER_LENGTH + rr->length */
 372                 }
 373
 374         s->rstate=SSL_ST_READ_HEADER; /* set state for later operations */
 375
 376         /* At this point, s->packet_length == SSL3_RT_HEADER_LNGTH + rr->length,
 377          * and we have that many bytes in s->packet
 378          */
 379         rr->input= &(s->packet[SSL3_RT_HEADER_LENGTH]);
 380
 381         /* ok, we can now read from 's->packet' data into 'rr'
 382          * rr->input points at rr->length bytes, which
 383          * need to be copied into rr->data by either
 384          * the decryption or by the decompression
 385          * When the data is 'copied' into the rr->data buffer,
 386          * rr->input will be pointed at the new buffer */
 387
 388         /* We now have - encrypted [ MAC [ compressed [ plain ] ] ]
 389          * rr->length bytes of encrypted compressed stuff. */
 390
 391         /* check is not needed I believe */
 392         if (rr->length > SSL3_RT_MAX_ENCRYPTED_LENGTH+extra)
 393                 {
 394                 al=SSL_AD_RECORD_OVERFLOW;
 395                 SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_ENCRYPTED_LENGTH_TOO_LONG);
 396                 goto f_err;
 397                 }
 398
 399         /* decrypt in place in 'rr->input' */
 400         rr->data=rr->input;
 401
 402         enc_err = s->method->ssl3_enc->enc(s,0);
 403         /* enc_err is:
 404          *    0: (in non-constant time) if the record is publically invalid.
 405          *    1: if the padding is valid
 406          *    -1: if the padding is invalid */
 407         if (enc_err == 0)
 408                 {
 409                 al=SSL_AD_DECRYPTION_FAILED;
 410                 SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_BLOCK_CIPHER_PAD_IS_WRONG);
 411                 goto f_err;
 412                 }
 413
 414 #ifdef TLS_DEBUG
 415 printf("dec %d\n",rr->length);
 416 { unsigned int z; for (z=0; z<rr->length; z++) printf("%02X%c",rr->data[z],((z+1)%16)?' ':'\n'); }
 417 printf("\n");
 418 #endif
 419
 420         /* r->length is now the compressed data plus mac */
 421         if ((sess != NULL) &&
 422             (s->enc_read_ctx != NULL) &&
 423             (EVP_MD_CTX_md(s->read_hash) != NULL))
 424                 {
 425                 /* s->read_hash != NULL => mac_size != -1 */
 426                 unsigned char *mac = NULL;
 427                 unsigned char mac_tmp[EVP_MAX_MD_SIZE];
 428                 mac_size=EVP_MD_CTX_size(s->read_hash);
 429                 OPENSSL_assert(mac_size <= EVP_MAX_MD_SIZE);
 430
 431                 /* kludge: *_cbc_remove_padding passes padding length in rr->type */
 432                 orig_len = rr->length+((unsigned int)rr->type>>8);
 433
 434                 /* orig_len is the length of the record before any padding was
 435                  * removed. This is public information, as is the MAC in use,
 436                  * therefore we can safely process the record in a different
 437                  * amount of time if it's too short to possibly contain a MAC.
 438                  */
 439                 if (orig_len < mac_size ||
 440                     /* CBC records must have a padding length byte too. */
 441                     (EVP_CIPHER_CTX_mode(s->enc_read_ctx) == EVP_CIPH_CBC_MODE &&
 442                      orig_len < mac_size+1))
 443                         {
 444                         al=SSL_AD_DECODE_ERROR;
 445                         SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_LENGTH_TOO_SHORT);
 446                         goto f_err;
 447                         }
 448
 449                 if (EVP_CIPHER_CTX_mode(s->enc_read_ctx) == EVP_CIPH_CBC_MODE)
 450                         {
 451                         /* We update the length so that the TLS header bytes
 452                          * can be constructed correctly but we need to extract
 453                          * the MAC in constant time from within the record,
 454                          * without leaking the contents of the padding bytes.
 455                          * */
 456                         mac = mac_tmp;
 457                         ssl3_cbc_copy_mac(mac_tmp, rr, mac_size, orig_len);
 458                         rr->length -= mac_size;
 459                         }
 460                 else
 461                         {
 462                         /* In this case there's no padding, so |orig_len|
 463                          * equals |rec->length| and we checked that there's
 464                          * enough bytes for |mac_size| above. */
 465                         rr->length -= mac_size;
 466                         mac = &rr->data[rr->length];
 467                         }
 468
 469                 i=s->method->ssl3_enc->mac(s,md,0 /* not send */);
 470                 if (i < 0 || mac == NULL || CRYPTO_memcmp(md, mac, (size_t)mac_size) != 0)
 471                         enc_err = -1;
 472                 if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH+extra+mac_size)
 473                         enc_err = -1;
 474                 }
 475
 476         if (enc_err < 0)
 477                 {
 478                 /* A separate 'decryption_failed' alert was introduced with TLS 1.0,
 479                  * SSL 3.0 only has 'bad_record_mac'.  But unless a decryption
 480                  * failure is directly visible from the ciphertext anyway,
 481                  * we should not reveal which kind of error occured -- this
 482                  * might become visible to an attacker (e.g. via a logfile) */
 483                 al=SSL_AD_BAD_RECORD_MAC;
 484                 SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC);
 485                 goto f_err;
 486                 }
 487
 488         /* r->length is now just compressed */
 489         if (s->expand != NULL)
 490                 {
 491                 if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH+extra)
 492                         {
 493                         al=SSL_AD_RECORD_OVERFLOW;
 494                         SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_COMPRESSED_LENGTH_TOO_LONG);
 495                         goto f_err;
 496                         }
 497                 if (!ssl3_do_uncompress(s))
 498                         {
 499                         al=SSL_AD_DECOMPRESSION_FAILURE;
 500                         SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_BAD_DECOMPRESSION);
 501                         goto f_err;
 502                         }
 503                 }
 504
 505         if (rr->length > SSL3_RT_MAX_PLAIN_LENGTH+extra)
 506                 {
 507                 al=SSL_AD_RECORD_OVERFLOW;
 508                 SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_DATA_LENGTH_TOO_LONG);
 509                 goto f_err;
 510                 }
 511
 512         rr->off=0;
 513         /* So at this point the following is true
 514          * ssl->s3->rrec.type   is the type of record
 515          * ssl->s3->rrec.length == number of bytes in record
 516          * ssl->s3->rrec.off    == offset to first valid byte
 517          * ssl->s3->rrec.data   == where to take bytes from, increment
 518          *                         after use :-).
 519          */
 520
 521         /* we have pulled in a full packet so zero things */
 522         s->packet_length=0;
 523
 524         /* just read a 0 length packet */
 525         if (rr->length == 0) goto again;
 526
 527 #if 0
 528 fprintf(stderr, "Ultimate Record type=%d, Length=%d\n", rr->type, rr->length);
 529 #endif
 530
 531         return(1);
 532
 533 f_err:
 534         ssl3_send_alert(s,SSL3_AL_FATAL,al);
 535 err:
 536         return(ret);
 537         }
 538
 539 int ssl3_do_uncompress(SSL *ssl)
 540         {
 541 #ifndef OPENSSL_NO_COMP
 542         int i;
 543         SSL3_RECORD *rr;
 544
 545         rr= &(ssl->s3->rrec);
 546         i=COMP_expand_block(ssl->expand,rr->comp,
 547                 SSL3_RT_MAX_PLAIN_LENGTH,rr->data,(int)rr->length);
 548         if (i < 0)
 549                 return(0);
 550         else
 551                 rr->length=i;
 552         rr->data=rr->comp;
 553 #endif
 554         return(1);
 555         }
 556
 557 int ssl3_do_compress(SSL *ssl)
 558         {
 559 #ifndef OPENSSL_NO_COMP
 560         int i;
 561         SSL3_RECORD *wr;
 562
 563         wr= &(ssl->s3->wrec);
 564         i=COMP_compress_block(ssl->compress,wr->data,
 565                 SSL3_RT_MAX_COMPRESSED_LENGTH,
 566                 wr->input,(int)wr->length);
 567         if (i < 0)
 568                 return(0);
 569         else
 570                 wr->length=i;
 571
 572         wr->input=wr->data;
 573 #endif
 574         return(1);
 575         }
 576
 577 /* Call this to write data in records of type 'type'
 578  * It will return <= 0 if not all data has been sent or non-blocking IO.
 579  */
 580 int ssl3_write_bytes(SSL *s, int type, const void *buf_, int len)
 581         {
 582         const unsigned char *buf=buf_;
 583         unsigned int tot,n,nw;
 584         int i;
 585
 586         s->rwstate=SSL_NOTHING;
 587         tot=s->s3->wnum;
 588         s->s3->wnum=0;
 589
 590         if (SSL_in_init(s) && !s->in_handshake)
 591                 {
 592                 i=s->handshake_func(s);
 593                 if (i < 0) return(i);
 594                 if (i == 0)
 595                         {
 596                         SSLerr(SSL_F_SSL3_WRITE_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
 597                         return -1;
 598                         }
 599                 }
 600
 601         n=(len-tot);
 602         for (;;)
 603                 {
 604                 if (n > s->max_send_fragment)
 605                         nw=s->max_send_fragment;
 606                 else
 607                         nw=n;
 608
 609                 i=do_ssl3_write(s, type, &(buf[tot]), nw, 0);
 610                 if (i <= 0)
 611                         {
 612                         s->s3->wnum=tot;
 613                         return i;
 614                         }
 615
 616                 if ((i == (int)n) ||
 617                         (type == SSL3_RT_APPLICATION_DATA &&
 618                          (s->mode & SSL_MODE_ENABLE_PARTIAL_WRITE)))
 619                         {
 620                         /* next chunk of data should get another prepended empty fragment
 621                          * in ciphersuites with known-IV weakness: */
 622                         s->s3->empty_fragment_done = 0;
 623
 624                         return tot+i;
 625                         }
 626
 627                 n-=i;
 628                 tot+=i;
 629                 }
 630         }
 631
 632 static int do_ssl3_write(SSL *s, int type, const unsigned char *buf,
 633                          unsigned int len, int create_empty_fragment)
 634         {
 635         unsigned char *p,*plen;
 636         int i,mac_size,clear=0;
 637         int prefix_len=0;
 638         int eivlen;
 639         long align=0;
 640         SSL3_RECORD *wr;
 641         SSL3_BUFFER *wb=&(s->s3->wbuf);
 642         SSL_SESSION *sess;
 643
 644         if (wb->buf == NULL)
 645                 if (!ssl3_setup_write_buffer(s))
 646                         return -1;
 647
 648         /* first check if there is a SSL3_BUFFER still being written
 649          * out.  This will happen with non blocking IO */
 650         if (wb->left != 0)
 651                 return(ssl3_write_pending(s,type,buf,len));
 652
 653         /* If we have an alert to send, lets send it */
 654         if (s->s3->alert_dispatch)
 655                 {
 656                 i=s->method->ssl_dispatch_alert(s);
 657                 if (i <= 0)
 658                         return(i);
 659                 /* if it went, fall through and send more stuff */
 660                 }
 661
 662         if (len == 0 && !create_empty_fragment)
 663                 return 0;
 664
 665         wr= &(s->s3->wrec);
 666         sess=s->session;
 667
 668         if (    (sess == NULL) ||
 669                 (s->enc_write_ctx == NULL) ||
 670                 (EVP_MD_CTX_md(s->write_hash) == NULL))
 671                 {
 672 #if 1
 673                 clear=s->enc_write_ctx?0:1;     /* must be AEAD cipher */
 674 #else
 675                 clear=1;
 676 #endif
 677                 mac_size=0;
 678                 }
 679         else
 680                 {
 681                 mac_size=EVP_MD_CTX_size(s->write_hash);
 682                 if (mac_size < 0)
 683                         goto err;
 684                 }
 685
 686         /* 'create_empty_fragment' is true only when this function calls itself */
 687         if (!clear && !create_empty_fragment && !s->s3->empty_fragment_done)
 688                 {
 689                 /* countermeasure against known-IV weakness in CBC ciphersuites
 690                  * (see http://www.openssl.org/~bodo/tls-cbc.txt) */
 691
 692                 if (s->s3->need_empty_fragments && type == SSL3_RT_APPLICATION_DATA)
 693                         {
 694                         /* recursive function call with 'create_empty_fragment' set;
 695                          * this prepares and buffers the data for an empty fragment
 696                          * (these 'prefix_len' bytes are sent out later
 697                          * together with the actual payload) */
 698                         prefix_len = do_ssl3_write(s, type, buf, 0, 1);
 699                         if (prefix_len <= 0)
 700                                 goto err;
 701
 702                         if (prefix_len >
 703                 (SSL3_RT_HEADER_LENGTH + SSL3_RT_SEND_MAX_ENCRYPTED_OVERHEAD))
 704                                 {
 705                                 /* insufficient space */
 706                                 SSLerr(SSL_F_DO_SSL3_WRITE, ERR_R_INTERNAL_ERROR);
 707                                 goto err;
 708                                 }
 709                         }
 710
 711                 s->s3->empty_fragment_done = 1;
 712                 }
 713
 714         if (create_empty_fragment)
 715                 {
 716 #if defined(SSL3_ALIGN_PAYLOAD) && SSL3_ALIGN_PAYLOAD!=0
 717                 /* extra fragment would be couple of cipher blocks,
 718                  * which would be multiple of SSL3_ALIGN_PAYLOAD, so
 719                  * if we want to align the real payload, then we can
 720                  * just pretent we simply have two headers. */
 721                 align = (long)wb->buf + 2*SSL3_RT_HEADER_LENGTH;
 722                 align = (-align)&(SSL3_ALIGN_PAYLOAD-1);
 723 #endif
 724                 p = wb->buf + align;
 725                 wb->offset  = align;
 726                 }
 727         else if (prefix_len)
 728                 {
 729                 p = wb->buf + wb->offset + prefix_len;
 730                 }
 731         else
 732                 {
 733 #if defined(SSL3_ALIGN_PAYLOAD) && SSL3_ALIGN_PAYLOAD!=0
 734                 align = (long)wb->buf + SSL3_RT_HEADER_LENGTH;
 735                 align = (-align)&(SSL3_ALIGN_PAYLOAD-1);
 736 #endif
 737                 p = wb->buf + align;
 738                 wb->offset  = align;
 739                 }
 740
 741         /* write the header */
 742
 743         *(p++)=type&0xff;
 744         wr->type=type;
 745
 746         *(p++)=(s->version>>8);
 747         /* Some servers hang if iniatial client hello is larger than 256
 748          * bytes and record version number > TLS 1.0
 749          */
 750         if (s->state == SSL3_ST_CW_CLNT_HELLO_B
 751                                 && !s->renegotiate
 752                                 && TLS1_get_version(s) > TLS1_VERSION)
 753                 *(p++) = 0x1;
 754         else
 755                 *(p++)=s->version&0xff;
 756
 757         /* field where we are to write out packet length */
 758         plen=p;
 759         p+=2;
 760         /* Explicit IV length, block ciphers and TLS version 1.1 or later */
 761         if (s->enc_write_ctx && s->version >= TLS1_1_VERSION)
 762                 {
 763                 int mode = EVP_CIPHER_CTX_mode(s->enc_write_ctx);
 764                 if (mode == EVP_CIPH_CBC_MODE)
 765                         {
 766                         eivlen = EVP_CIPHER_CTX_iv_length(s->enc_write_ctx);
 767                         if (eivlen <= 1)
 768                                 eivlen = 0;
 769                         }
 770                 /* Need explicit part of IV for GCM mode */
 771                 else if (mode == EVP_CIPH_GCM_MODE)
 772                         eivlen = EVP_GCM_TLS_EXPLICIT_IV_LEN;
 773                 else
 774                         eivlen = 0;
 775                 }
 776         else
 777                 eivlen = 0;
 778
 779         /* lets setup the record stuff. */
 780         wr->data=p + eivlen;
 781         wr->length=(int)len;
 782         wr->input=(unsigned char *)buf;
 783
 784         /* we now 'read' from wr->input, wr->length bytes into
 785          * wr->data */
 786
 787         /* first we compress */
 788         if (s->compress != NULL)
 789                 {
 790                 if (!ssl3_do_compress(s))
 791                         {
 792                         SSLerr(SSL_F_DO_SSL3_WRITE,SSL_R_COMPRESSION_FAILURE);
 793                         goto err;
 794                         }
 795                 }
 796         else
 797                 {
 798                 memcpy(wr->data,wr->input,wr->length);
 799                 wr->input=wr->data;
 800                 }
 801
 802         /* we should still have the output to wr->data and the input
 803          * from wr->input.  Length should be wr->length.
 804          * wr->data still points in the wb->buf */
 805
 806         if (mac_size != 0)
 807                 {
 808                 if (s->method->ssl3_enc->mac(s,&(p[wr->length + eivlen]),1) < 0)
 809                         goto err;
 810                 wr->length+=mac_size;
 811                 }
 812
 813         wr->input=p;
 814         wr->data=p;
 815
 816         if (eivlen)
 817                 {
 818         /*      if (RAND_pseudo_bytes(p, eivlen) <= 0)
 819                         goto err; */
 820                 wr->length += eivlen;
 821                 }
 822
 823         /* ssl3_enc can only have an error on read */
 824         s->method->ssl3_enc->enc(s,1);
 825
 826         /* record length after mac and block padding */
 827         s2n(wr->length,plen);
 828
 829         /* we should now have
 830          * wr->data pointing to the encrypted data, which is
 831          * wr->length long */
 832         wr->type=type; /* not needed but helps for debugging */
 833         wr->length+=SSL3_RT_HEADER_LENGTH;
 834
 835         if (create_empty_fragment)
 836                 {
 837                 /* we are in a recursive call;
 838                  * just return the length, don't write out anything here
 839                  */
 840                 return wr->length;
 841                 }
 842
 843         /* now let's set up wb */
 844         wb->left = prefix_len + wr->length;
 845
 846         /* memorize arguments so that ssl3_write_pending can detect bad write retries later */
 847         s->s3->wpend_tot=len;
 848         s->s3->wpend_buf=buf;
 849         s->s3->wpend_type=type;
 850         s->s3->wpend_ret=len;
 851
 852         /* we now just need to write the buffer */
 853         return ssl3_write_pending(s,type,buf,len);
 854 err:
 855         return -1;
 856         }
 857
 858 /* if s->s3->wbuf.left != 0, we need to call this */
 859 int ssl3_write_pending(SSL *s, int type, const unsigned char *buf,
 860         unsigned int len)
 861         {
 862         int i;
 863         SSL3_BUFFER *wb=&(s->s3->wbuf);
 864
 865 /* XXXX */
 866         if ((s->s3->wpend_tot > (int)len)
 867                 || ((s->s3->wpend_buf != buf) &&
 868                         !(s->mode & SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER))
 869                 || (s->s3->wpend_type != type))
 870                 {
 871                 SSLerr(SSL_F_SSL3_WRITE_PENDING,SSL_R_BAD_WRITE_RETRY);
 872                 return(-1);
 873                 }
 874
 875         for (;;)
 876                 {
 877                 clear_sys_error();
 878                 if (s->wbio != NULL)
 879                         {
 880                         s->rwstate=SSL_WRITING;
 881                         i=BIO_write(s->wbio,
 882                                 (char *)&(wb->buf[wb->offset]),
 883                                 (unsigned int)wb->left);
 884                         }
 885                 else
 886                         {
 887                         SSLerr(SSL_F_SSL3_WRITE_PENDING,SSL_R_BIO_NOT_SET);
 888                         i= -1;
 889                         }
 890                 if (i == wb->left)
 891                         {
 892                         wb->left=0;
 893                         wb->offset+=i;
 894                         if (s->mode & SSL_MODE_RELEASE_BUFFERS &&
 895                             SSL_version(s) != DTLS1_VERSION && SSL_version(s) != DTLS1_BAD_VER)
 896                                 ssl3_release_write_buffer(s);
 897                         s->rwstate=SSL_NOTHING;
 898                         return(s->s3->wpend_ret);
 899                         }
 900                 else if (i <= 0) {
 901                         if (s->version == DTLS1_VERSION ||
 902                             s->version == DTLS1_BAD_VER) {
 903                                 /* For DTLS, just drop it. That's kind of the whole
 904                                    point in using a datagram service */
 905                                 wb->left = 0;
 906                         }
 907                         return(i);
 908                 }
 909                 wb->offset+=i;
 910                 wb->left-=i;
 911                 }
 912         }
 913
 914 /* Return up to 'len' payload bytes received in 'type' records.
 915  * 'type' is one of the following:
 916  *
 917  *   -  SSL3_RT_HANDSHAKE (when ssl3_get_message calls us)
 918  *   -  SSL3_RT_APPLICATION_DATA (when ssl3_read calls us)
 919  *   -  0 (during a shutdown, no data has to be returned)
 920  *
 921  * If we don't have stored data to work from, read a SSL/TLS record first
 922  * (possibly multiple records if we still don't have anything to return).
 923  *
 924  * This function must handle any surprises the peer may have for us, such as
 925  * Alert records (e.g. close_notify), ChangeCipherSpec records (not really
 926  * a surprise, but handled as if it were), or renegotiation requests.
 927  * Also if record payloads contain fragments too small to process, we store
 928  * them until there is enough for the respective protocol (the record protocol
 929  * may use arbitrary fragmentation and even interleaving):
 930  *     Change cipher spec protocol
 931  *             just 1 byte needed, no need for keeping anything stored
 932  *     Alert protocol
 933  *             2 bytes needed (AlertLevel, AlertDescription)
 934  *     Handshake protocol
 935  *             4 bytes needed (HandshakeType, uint24 length) -- we just have
 936  *             to detect unexpected Client Hello and Hello Request messages
 937  *             here, anything else is handled by higher layers
 938  *     Application data protocol
 939  *             none of our business
 940  */
 941 int ssl3_read_bytes(SSL *s, int type, unsigned char *buf, int len, int peek)
 942         {
 943         int al,i,j,ret;
 944         unsigned int n;
 945         SSL3_RECORD *rr;
 946         void (*cb)(const SSL *ssl,int type2,int val)=NULL;
 947
 948         if (s->s3->rbuf.buf == NULL) /* Not initialized yet */
 949                 if (!ssl3_setup_read_buffer(s))
 950                         return(-1);
 951
 952         if ((type && (type != SSL3_RT_APPLICATION_DATA) && (type != SSL3_RT_HANDSHAKE) && type) ||
 953             (peek && (type != SSL3_RT_APPLICATION_DATA)))
 954                 {
 955                 SSLerr(SSL_F_SSL3_READ_BYTES, ERR_R_INTERNAL_ERROR);
 956                 return -1;
 957                 }
 958
 959         if ((type == SSL3_RT_HANDSHAKE) && (s->s3->handshake_fragment_len > 0))
 960                 /* (partially) satisfy request from storage */
 961                 {
 962                 unsigned char *src = s->s3->handshake_fragment;
 963                 unsigned char *dst = buf;
 964                 unsigned int k;
 965
 966                 /* peek == 0 */
 967                 n = 0;
 968                 while ((len > 0) && (s->s3->handshake_fragment_len > 0))
 969                         {
 970                         *dst++ = *src++;
 971                         len--; s->s3->handshake_fragment_len--;
 972                         n++;
 973                         }
 974                 /* move any remaining fragment bytes: */
 975                 for (k = 0; k < s->s3->handshake_fragment_len; k++)
 976                         s->s3->handshake_fragment[k] = *src++;
 977                 return n;
 978         }
 979
 980         /* Now s->s3->handshake_fragment_len == 0 if type == SSL3_RT_HANDSHAKE. */
 981
 982         if (!s->in_handshake && SSL_in_init(s))
 983                 {
 984                 /* type == SSL3_RT_APPLICATION_DATA */
 985                 i=s->handshake_func(s);
 986                 if (i < 0) return(i);
 987                 if (i == 0)
 988                         {
 989                         SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
 990                         return(-1);
 991                         }
 992                 }
 993 start:
 994         s->rwstate=SSL_NOTHING;
 995
 996         /* s->s3->rrec.type         - is the type of record
 997          * s->s3->rrec.data,    - data
 998          * s->s3->rrec.off,     - offset into 'data' for next read
 999          * s->s3->rrec.length,  - number of bytes. */
1000         rr = &(s->s3->rrec);
1001
1002         /* get new packet if necessary */
1003         if ((rr->length == 0) || (s->rstate == SSL_ST_READ_BODY))
1004                 {
1005                 ret=ssl3_get_record(s);
1006                 if (ret <= 0) return(ret);
1007                 }
1008
1009         /* we now have a packet which can be read and processed */
1010
1011         if (s->s3->change_cipher_spec /* set when we receive ChangeCipherSpec,
1012                                        * reset by ssl3_get_finished */
1013                 && (rr->type != SSL3_RT_HANDSHAKE))
1014                 {
1015                 al=SSL_AD_UNEXPECTED_MESSAGE;
1016                 SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_DATA_BETWEEN_CCS_AND_FINISHED);
1017                 goto f_err;
1018                 }
1019
1020         /* If the other end has shut down, throw anything we read away
1021          * (even in 'peek' mode) */
1022         if (s->shutdown & SSL_RECEIVED_SHUTDOWN)
1023                 {
1024                 rr->length=0;
1025                 s->rwstate=SSL_NOTHING;
1026                 return(0);
1027                 }
1028
1029
1030         if (type == rr->type) /* SSL3_RT_APPLICATION_DATA or SSL3_RT_HANDSHAKE */
1031                 {
1032                 /* make sure that we are not getting application data when we
1033                  * are doing a handshake for the first time */
1034                 if (SSL_in_init(s) && (type == SSL3_RT_APPLICATION_DATA) &&
1035                         (s->enc_read_ctx == NULL))
1036                         {
1037                         al=SSL_AD_UNEXPECTED_MESSAGE;
1038                         SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_APP_DATA_IN_HANDSHAKE);
1039                         goto f_err;
1040                         }
1041
1042                 if (len <= 0) return(len);
1043
1044                 if ((unsigned int)len > rr->length)
1045                         n = rr->length;
1046                 else
1047                         n = (unsigned int)len;
1048
1049                 memcpy(buf,&(rr->data[rr->off]),n);
1050                 if (!peek)
1051                         {
1052                         rr->length-=n;
1053                         rr->off+=n;
1054                         if (rr->length == 0)
1055                                 {
1056                                 s->rstate=SSL_ST_READ_HEADER;
1057                                 rr->off=0;
1058                                 if (s->mode & SSL_MODE_RELEASE_BUFFERS)
1059                                         ssl3_release_read_buffer(s);
1060                                 }
1061                         }
1062                 return(n);
1063                 }
1064
1065
1066         /* If we get here, then type != rr->type; if we have a handshake
1067          * message, then it was unexpected (Hello Request or Client Hello). */
1068
1069         /* In case of record types for which we have 'fragment' storage,
1070          * fill that so that we can process the data at a fixed place.
1071          */
1072                 {
1073                 unsigned int dest_maxlen = 0;
1074                 unsigned char *dest = NULL;
1075                 unsigned int *dest_len = NULL;
1076
1077                 if (rr->type == SSL3_RT_HANDSHAKE)
1078                         {
1079                         dest_maxlen = sizeof s->s3->handshake_fragment;
1080                         dest = s->s3->handshake_fragment;
1081                         dest_len = &s->s3->handshake_fragment_len;
1082                         }
1083                 else if (rr->type == SSL3_RT_ALERT)
1084                         {
1085                         dest_maxlen = sizeof s->s3->alert_fragment;
1086                         dest = s->s3->alert_fragment;
1087                         dest_len = &s->s3->alert_fragment_len;
1088                         }
1089 #ifndef OPENSSL_NO_HEARTBEATS
1090                 else if (rr->type == TLS1_RT_HEARTBEAT)
1091                         {
1092                         tls1_process_heartbeat(s);
1093
1094                         /* Exit and notify application to read again */
1095                         rr->length = 0;
1096                         s->rwstate=SSL_READING;
1097                         BIO_clear_retry_flags(SSL_get_rbio(s));
1098                         BIO_set_retry_read(SSL_get_rbio(s));
1099                         return(-1);
1100                         }
1101 #endif
1102
1103                 if (dest_maxlen > 0)
1104                         {
1105                         n = dest_maxlen - *dest_len; /* available space in 'dest' */
1106                         if (rr->length < n)
1107                                 n = rr->length; /* available bytes */
1108
1109                         /* now move 'n' bytes: */
1110                         while (n-- > 0)
1111                                 {
1112                                 dest[(*dest_len)++] = rr->data[rr->off++];
1113                                 rr->length--;
1114                                 }
1115
1116                         if (*dest_len < dest_maxlen)
1117                                 goto start; /* fragment was too small */
1118                         }
1119                 }
1120
1121         /* s->s3->handshake_fragment_len == 4  iff  rr->type == SSL3_RT_HANDSHAKE;
1122          * s->s3->alert_fragment_len == 2      iff  rr->type == SSL3_RT_ALERT.
1123          * (Possibly rr is 'empty' now, i.e. rr->length may be 0.) */
1124
1125         /* If we are a client, check for an incoming 'Hello Request': */
1126         if ((!s->server) &&
1127                 (s->s3->handshake_fragment_len >= 4) &&
1128                 (s->s3->handshake_fragment[0] == SSL3_MT_HELLO_REQUEST) &&
1129                 (s->session != NULL) && (s->session->cipher != NULL))
1130                 {
1131                 s->s3->handshake_fragment_len = 0;
1132
1133                 if ((s->s3->handshake_fragment[1] != 0) ||
1134                         (s->s3->handshake_fragment[2] != 0) ||
1135                         (s->s3->handshake_fragment[3] != 0))
1136                         {
1137                         al=SSL_AD_DECODE_ERROR;
1138                         SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_BAD_HELLO_REQUEST);
1139                         goto f_err;
1140                         }
1141
1142                 if (s->msg_callback)
1143                         s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE, s->s3->handshake_fragment, 4, s, s->msg_callback_arg);
1144
1145                 if (SSL_is_init_finished(s) &&
1146                         !(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS) &&
1147                         !s->s3->renegotiate)
1148                         {
1149                         ssl3_renegotiate(s);
1150                         if (ssl3_renegotiate_check(s))
1151                                 {
1152                                 i=s->handshake_func(s);
1153                                 if (i < 0) return(i);
1154                                 if (i == 0)
1155                                         {
1156                                         SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
1157                                         return(-1);
1158                                         }
1159
1160                                 if (!(s->mode & SSL_MODE_AUTO_RETRY))
1161                                         {
1162                                         if (s->s3->rbuf.left == 0) /* no read-ahead left? */
1163                                                 {
1164                                                 BIO *bio;
1165                                                 /* In the case where we try to read application data,
1166                                                  * but we trigger an SSL handshake, we return -1 with
1167                                                  * the retry option set.  Otherwise renegotiation may
1168                                                  * cause nasty problems in the blocking world */
1169                                                 s->rwstate=SSL_READING;
1170                                                 bio=SSL_get_rbio(s);
1171                                                 BIO_clear_retry_flags(bio);
1172                                                 BIO_set_retry_read(bio);
1173                                                 return(-1);
1174                                                 }
1175                                         }
1176                                 }
1177                         }
1178                 /* we either finished a handshake or ignored the request,
1179                  * now try again to obtain the (application) data we were asked for */
1180                 goto start;
1181                 }
1182         /* If we are a server and get a client hello when renegotiation isn't
1183          * allowed send back a no renegotiation alert and carry on.
1184          * WARNING: experimental code, needs reviewing (steve)
1185          */
1186         if (s->server &&
1187                 SSL_is_init_finished(s) &&
1188                 !s->s3->send_connection_binding &&
1189                 (s->version > SSL3_VERSION) &&
1190                 (s->s3->handshake_fragment_len >= 4) &&
1191                 (s->s3->handshake_fragment[0] == SSL3_MT_CLIENT_HELLO) &&
1192                 (s->session != NULL) && (s->session->cipher != NULL) &&
1193                 !(s->ctx->options & SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION))
1194
1195                 {
1196                 /*s->s3->handshake_fragment_len = 0;*/
1197                 rr->length = 0;
1198                 ssl3_send_alert(s,SSL3_AL_WARNING, SSL_AD_NO_RENEGOTIATION);
1199                 goto start;
1200                 }
1201         if (s->s3->alert_fragment_len >= 2)
1202                 {
1203                 int alert_level = s->s3->alert_fragment[0];
1204                 int alert_descr = s->s3->alert_fragment[1];
1205
1206                 s->s3->alert_fragment_len = 0;
1207
1208                 if (s->msg_callback)
1209                         s->msg_callback(0, s->version, SSL3_RT_ALERT, s->s3->alert_fragment, 2, s, s->msg_callback_arg);
1210
1211                 if (s->info_callback != NULL)
1212                         cb=s->info_callback;
1213                 else if (s->ctx->info_callback != NULL)
1214                         cb=s->ctx->info_callback;
1215
1216                 if (cb != NULL)
1217                         {
1218                         j = (alert_level << 8) | alert_descr;
1219                         cb(s, SSL_CB_READ_ALERT, j);
1220                         }
1221
1222                 if (alert_level == 1) /* warning */
1223                         {
1224                         s->s3->warn_alert = alert_descr;
1225                         if (alert_descr == SSL_AD_CLOSE_NOTIFY)
1226                                 {
1227                                 s->shutdown |= SSL_RECEIVED_SHUTDOWN;
1228                                 return(0);
1229                                 }
1230                         /* This is a warning but we receive it if we requested
1231                          * renegotiation and the peer denied it. Terminate with
1232                          * a fatal alert because if application tried to
1233                          * renegotiatie it presumably had a good reason and
1234                          * expects it to succeed.
1235                          *
1236                          * In future we might have a renegotiation where we
1237                          * don't care if the peer refused it where we carry on.
1238                          */
1239                         else if (alert_descr == SSL_AD_NO_RENEGOTIATION)
1240                                 {
1241                                 al = SSL_AD_HANDSHAKE_FAILURE;
1242                                 SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_NO_RENEGOTIATION);
1243                                 goto f_err;
1244                                 }
1245 #ifdef SSL_AD_MISSING_SRP_USERNAME
1246                         else if (alert_descr == SSL_AD_MISSING_SRP_USERNAME)
1247                                 return(0);
1248 #endif
1249                         }
1250                 else if (alert_level == 2) /* fatal */
1251                         {
1252                         char tmp[16];
1253
1254                         s->rwstate=SSL_NOTHING;
1255                         s->s3->fatal_alert = alert_descr;
1256                         SSLerr(SSL_F_SSL3_READ_BYTES, SSL_AD_REASON_OFFSET + alert_descr);
1257                         BIO_snprintf(tmp,sizeof tmp,"%d",alert_descr);
1258                         ERR_add_error_data(2,"SSL alert number ",tmp);
1259                         s->shutdown|=SSL_RECEIVED_SHUTDOWN;
1260                         SSL_CTX_remove_session(s->ctx,s->session);
1261                         return(0);
1262                         }
1263                 else
1264                         {
1265                         al=SSL_AD_ILLEGAL_PARAMETER;
1266                         SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_UNKNOWN_ALERT_TYPE);
1267                         goto f_err;
1268                         }
1269
1270                 goto start;
1271                 }
1272
1273         if (s->shutdown & SSL_SENT_SHUTDOWN) /* but we have not received a shutdown */
1274                 {
1275                 s->rwstate=SSL_NOTHING;
1276                 rr->length=0;
1277                 return(0);
1278                 }
1279
1280         if (rr->type == SSL3_RT_CHANGE_CIPHER_SPEC)
1281                 {
1282                 /* 'Change Cipher Spec' is just a single byte, so we know
1283                  * exactly what the record payload has to look like */
1284                 if (    (rr->length != 1) || (rr->off != 0) ||
1285                         (rr->data[0] != SSL3_MT_CCS))
1286                         {
1287                         al=SSL_AD_ILLEGAL_PARAMETER;
1288                         SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_BAD_CHANGE_CIPHER_SPEC);
1289                         goto f_err;
1290                         }
1291
1292                 /* Check we have a cipher to change to */
1293                 if (s->s3->tmp.new_cipher == NULL)
1294                         {
1295                         al=SSL_AD_UNEXPECTED_MESSAGE;
1296                         SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_CCS_RECEIVED_EARLY);
1297                         goto f_err;
1298                         }
1299
1300                 rr->length=0;
1301
1302                 if (s->msg_callback)
1303                         s->msg_callback(0, s->version, SSL3_RT_CHANGE_CIPHER_SPEC, rr->data, 1, s, s->msg_callback_arg);
1304
1305                 s->s3->change_cipher_spec=1;
1306                 if (!ssl3_do_change_cipher_spec(s))
1307                         goto err;
1308                 else
1309                         goto start;
1310                 }
1311
1312         /* Unexpected handshake message (Client Hello, or protocol violation) */
1313         if ((s->s3->handshake_fragment_len >= 4) &&     !s->in_handshake)
1314                 {
1315                 if (((s->state&SSL_ST_MASK) == SSL_ST_OK) &&
1316                         !(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS))
1317                         {
1318 #if 0 /* worked only because C operator preferences are not as expected (and
1319        * because this is not really needed for clients except for detecting
1320        * protocol violations): */
1321                         s->state=SSL_ST_BEFORE|(s->server)
1322                                 ?SSL_ST_ACCEPT
1323                                 :SSL_ST_CONNECT;
1324 #else
1325                         s->state = s->server ? SSL_ST_ACCEPT : SSL_ST_CONNECT;
1326 #endif
1327                         s->renegotiate=1;
1328                         s->new_session=1;
1329                         }
1330                 i=s->handshake_func(s);
1331                 if (i < 0) return(i);
1332                 if (i == 0)
1333                         {
1334                         SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
1335                         return(-1);
1336                         }
1337
1338                 if (!(s->mode & SSL_MODE_AUTO_RETRY))
1339                         {
1340                         if (s->s3->rbuf.left == 0) /* no read-ahead left? */
1341                                 {
1342                                 BIO *bio;
1343                                 /* In the case where we try to read application data,
1344                                  * but we trigger an SSL handshake, we return -1 with
1345                                  * the retry option set.  Otherwise renegotiation may
1346                                  * cause nasty problems in the blocking world */
1347                                 s->rwstate=SSL_READING;
1348                                 bio=SSL_get_rbio(s);
1349                                 BIO_clear_retry_flags(bio);
1350                                 BIO_set_retry_read(bio);
1351                                 return(-1);
1352                                 }
1353                         }
1354                 goto start;
1355                 }
1356
1357         switch (rr->type)
1358                 {
1359         default:
1360 #ifndef OPENSSL_NO_TLS
1361                 /* TLS up to v1.1 just ignores unknown message types:
1362                  * TLS v1.2 give an unexpected message alert.
1363                  */
1364                 if (s->version >= TLS1_VERSION && s->version <= TLS1_1_VERSION)
1365                         {
1366                         rr->length = 0;
1367                         goto start;
1368                         }
1369 #endif
1370                 al=SSL_AD_UNEXPECTED_MESSAGE;
1371                 SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_UNEXPECTED_RECORD);
1372                 goto f_err;
1373         case SSL3_RT_CHANGE_CIPHER_SPEC:
1374         case SSL3_RT_ALERT:
1375         case SSL3_RT_HANDSHAKE:
1376                 /* we already handled all of these, with the possible exception
1377                  * of SSL3_RT_HANDSHAKE when s->in_handshake is set, but that
1378                  * should not happen when type != rr->type */
1379                 al=SSL_AD_UNEXPECTED_MESSAGE;
1380                 SSLerr(SSL_F_SSL3_READ_BYTES,ERR_R_INTERNAL_ERROR);
1381                 goto f_err;
1382         case SSL3_RT_APPLICATION_DATA:
1383                 /* At this point, we were expecting handshake data,
1384                  * but have application data.  If the library was
1385                  * running inside ssl3_read() (i.e. in_read_app_data
1386                  * is set) and it makes sense to read application data
1387                  * at this point (session renegotiation not yet started),
1388                  * we will indulge it.
1389                  */
1390                 if (s->s3->in_read_app_data &&
1391                         (s->s3->total_renegotiations != 0) &&
1392                         ((
1393                                 (s->state & SSL_ST_CONNECT) &&
1394                                 (s->state >= SSL3_ST_CW_CLNT_HELLO_A) &&
1395                                 (s->state <= SSL3_ST_CR_SRVR_HELLO_A)
1396                                 ) || (
1397                                         (s->state & SSL_ST_ACCEPT) &&
1398                                         (s->state <= SSL3_ST_SW_HELLO_REQ_A) &&
1399                                         (s->state >= SSL3_ST_SR_CLNT_HELLO_A)
1400                                         )
1401                                 ))
1402                         {
1403                         s->s3->in_read_app_data=2;
1404                         return(-1);
1405                         }
1406                 else
1407                         {
1408                         al=SSL_AD_UNEXPECTED_MESSAGE;
1409                         SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_UNEXPECTED_RECORD);
1410                         goto f_err;
1411                         }
1412                 }
1413         /* not reached */
1414
1415 f_err:
1416         ssl3_send_alert(s,SSL3_AL_FATAL,al);
1417 err:
1418         return(-1);
1419         }
1420
1421 int ssl3_do_change_cipher_spec(SSL *s)
1422         {
1423         int i;
1424         const char *sender;
1425         int slen;
1426
1427         if (s->state & SSL_ST_ACCEPT)
1428                 i=SSL3_CHANGE_CIPHER_SERVER_READ;
1429         else
1430                 i=SSL3_CHANGE_CIPHER_CLIENT_READ;
1431
1432         if (s->s3->tmp.key_block == NULL)
1433                 {
1434                 if (s->session == NULL)
1435                         {
1436                         /* might happen if dtls1_read_bytes() calls this */
1437                         SSLerr(SSL_F_SSL3_DO_CHANGE_CIPHER_SPEC,SSL_R_CCS_RECEIVED_EARLY);
1438                         return (0);
1439                         }
1440
1441                 s->session->cipher=s->s3->tmp.new_cipher;
1442                 if (!s->method->ssl3_enc->setup_key_block(s)) return(0);
1443                 }
1444
1445         if (!s->method->ssl3_enc->change_cipher_state(s,i))
1446                 return(0);
1447
1448         /* we have to record the message digest at
1449          * this point so we can get it before we read
1450          * the finished message */
1451         if (s->state & SSL_ST_CONNECT)
1452                 {
1453                 sender=s->method->ssl3_enc->server_finished_label;
1454                 slen=s->method->ssl3_enc->server_finished_label_len;
1455                 }
1456         else
1457                 {
1458                 sender=s->method->ssl3_enc->client_finished_label;
1459                 slen=s->method->ssl3_enc->client_finished_label_len;
1460                 }
1461
1462         s->s3->tmp.peer_finish_md_len = s->method->ssl3_enc->final_finish_mac(s,
1463                 sender,slen,s->s3->tmp.peer_finish_md);
1464
1465         return(1);
1466         }
1467
1468 int ssl3_send_alert(SSL *s, int level, int desc)
1469         {
1470         /* Map tls/ssl alert value to correct one */
1471         desc=s->method->ssl3_enc->alert_value(desc);
1472         if (s->version == SSL3_VERSION && desc == SSL_AD_PROTOCOL_VERSION)
1473                 desc = SSL_AD_HANDSHAKE_FAILURE; /* SSL 3.0 does not have protocol_version alerts */
1474         if (desc < 0) return -1;
1475         /* If a fatal one, remove from cache */
1476         if ((level == 2) && (s->session != NULL))
1477                 SSL_CTX_remove_session(s->ctx,s->session);
1478
1479         s->s3->alert_dispatch=1;
1480         s->s3->send_alert[0]=level;
1481         s->s3->send_alert[1]=desc;
1482         if (s->s3->wbuf.left == 0) /* data still being written out? */
1483                 return s->method->ssl_dispatch_alert(s);
1484         /* else data is still being written out, we will get written
1485          * some time in the future */
1486         return -1;
1487         }
1488
1489 int ssl3_dispatch_alert(SSL *s)
1490         {
1491         int i,j;
1492         void (*cb)(const SSL *ssl,int type,int val)=NULL;
1493
1494         s->s3->alert_dispatch=0;
1495         i = do_ssl3_write(s, SSL3_RT_ALERT, &s->s3->send_alert[0], 2, 0);
1496         if (i <= 0)
1497                 {
1498                 s->s3->alert_dispatch=1;
1499                 }
1500         else
1501                 {
1502                 /* Alert sent to BIO.  If it is important, flush it now.
1503                  * If the message does not get sent due to non-blocking IO,
1504                  * we will not worry too much. */
1505                 if (s->s3->send_alert[0] == SSL3_AL_FATAL)
1506                         (void)BIO_flush(s->wbio);
1507
1508                 if (s->msg_callback)
1509                         s->msg_callback(1, s->version, SSL3_RT_ALERT, s->s3->send_alert, 2, s, s->msg_callback_arg);
1510
1511                 if (s->info_callback != NULL)
1512                         cb=s->info_callback;
1513                 else if (s->ctx->info_callback != NULL)
1514                         cb=s->ctx->info_callback;
1515
1516                 if (cb != NULL)
1517                         {
1518                         j=(s->s3->send_alert[0]<<8)|s->s3->send_alert[1];
1519                         cb(s,SSL_CB_WRITE_ALERT,j);
1520                         }
1521                 }
1522         return(i);
1523         }