5 Changes between 1.0.1b and 1.0.1c [10 May 2012]
7 *) Sanity check record length before skipping explicit IV in TLS
8 1.2, 1.1 and DTLS to fix DoS attack.
10 Thanks to Codenomicon for discovering this issue using Fuzz-o-Matic
11 fuzzing as a service testing platform.
15 *) Initialise tkeylen properly when encrypting CMS messages.
16 Thanks to Solar Designer of Openwall for reporting this issue.
19 *) In FIPS mode don't try to use composite ciphers as they are not
23 Changes between 1.0.1a and 1.0.1b [26 Apr 2012]
25 *) OpenSSL 1.0.0 sets SSL_OP_ALL to 0x80000FFFL and OpenSSL 1.0.1 and
26 1.0.1a set SSL_OP_NO_TLSv1_1 to 0x00000400L which would unfortunately
27 mean any application compiled against OpenSSL 1.0.0 headers setting
28 SSL_OP_ALL would also set SSL_OP_NO_TLSv1_1, unintentionally disablng
29 TLS 1.1 also. Fix this by changing the value of SSL_OP_NO_TLSv1_1 to
30 0x10000000L Any application which was previously compiled against
31 OpenSSL 1.0.1 or 1.0.1a headers and which cares about SSL_OP_NO_TLSv1_1
32 will need to be recompiled as a result. Letting be results in
33 inability to disable specifically TLS 1.1 and in client context,
34 in unlike event, limit maximum offered version to TLS 1.0 [see below].
37 *) In order to ensure interoperabilty SSL_OP_NO_protocolX does not
38 disable just protocol X, but all protocols above X *if* there are
39 protocols *below* X still enabled. In more practical terms it means
40 that if application wants to disable TLS1.0 in favor of TLS1.1 and
41 above, it's not sufficient to pass SSL_OP_NO_TLSv1, one has to pass
42 SSL_OP_NO_TLSv1|SSL_OP_NO_SSLv3|SSL_OP_NO_SSLv2. This applies to
46 Changes between 1.0.1 and 1.0.1a [19 Apr 2012]
48 *) Check for potentially exploitable overflows in asn1_d2i_read_bio
49 BUF_mem_grow and BUF_mem_grow_clean. Refuse attempts to shrink buffer
50 in CRYPTO_realloc_clean.
52 Thanks to Tavis Ormandy, Google Security Team, for discovering this
53 issue and to Adam Langley <agl@chromium.org> for fixing it.
55 [Adam Langley (Google), Tavis Ormandy, Google Security Team]
57 *) Don't allow TLS 1.2 SHA-256 ciphersuites in TLS 1.0, 1.1 connections.
60 *) Workarounds for some broken servers that "hang" if a client hello
61 record length exceeds 255 bytes.
63 1. Do not use record version number > TLS 1.0 in initial client
64 hello: some (but not all) hanging servers will now work.
65 2. If we set OPENSSL_MAX_TLS1_2_CIPHER_LENGTH this will truncate
66 the number of ciphers sent in the client hello. This should be
67 set to an even number, such as 50, for example by passing:
68 -DOPENSSL_MAX_TLS1_2_CIPHER_LENGTH=50 to config or Configure.
69 Most broken servers should now work.
70 3. If all else fails setting OPENSSL_NO_TLS1_2_CLIENT will disable
71 TLS 1.2 client support entirely.
74 *) Fix SEGV in Vector Permutation AES module observed in OpenSSH.
77 Changes between 1.0.0h and 1.0.1 [14 Mar 2012]
79 *) Add compatibility with old MDC2 signatures which use an ASN1 OCTET
80 STRING form instead of a DigestInfo.
83 *) The format used for MDC2 RSA signatures is inconsistent between EVP
84 and the RSA_sign/RSA_verify functions. This was made more apparent when
85 OpenSSL used RSA_sign/RSA_verify for some RSA signatures in particular
86 those which went through EVP_PKEY_METHOD in 1.0.0 and later. Detect
87 the correct format in RSA_verify so both forms transparently work.
90 *) Some servers which support TLS 1.0 can choke if we initially indicate
91 support for TLS 1.2 and later renegotiate using TLS 1.0 in the RSA
92 encrypted premaster secret. As a workaround use the maximum pemitted
93 client version in client hello, this should keep such servers happy
94 and still work with previous versions of OpenSSL.
97 *) Add support for TLS/DTLS heartbeats.
98 [Robin Seggelmann <seggelmann@fh-muenster.de>]
100 *) Add support for SCTP.
101 [Robin Seggelmann <seggelmann@fh-muenster.de>]
103 *) Improved PRNG seeding for VOS.
104 [Paul Green <Paul.Green@stratus.com>]
106 *) Extensive assembler packs updates, most notably:
108 - x86[_64]: AES-NI, PCLMULQDQ, RDRAND support;
109 - x86[_64]: SSSE3 support (SHA1, vector-permutation AES);
110 - x86_64: bit-sliced AES implementation;
111 - ARM: NEON support, contemporary platforms optimizations;
112 - s390x: z196 support;
113 - *: GHASH and GF(2^m) multiplication implementations;
117 *) Make TLS-SRP code conformant with RFC 5054 API cleanup
118 (removal of unnecessary code)
119 [Peter Sylvester <peter.sylvester@edelweb.fr>]
121 *) Add TLS key material exporter from RFC 5705.
124 *) Add DTLS-SRTP negotiation from RFC 5764.
127 *) Add Next Protocol Negotiation,
128 http://tools.ietf.org/html/draft-agl-tls-nextprotoneg-00. Can be
129 disabled with a no-npn flag to config or Configure. Code donated
131 [Adam Langley <agl@google.com> and Ben Laurie]
133 *) Add optional 64-bit optimized implementations of elliptic curves NIST-P224,
134 NIST-P256, NIST-P521, with constant-time single point multiplication on
135 typical inputs. Compiler support for the nonstandard type __uint128_t is
136 required to use this (present in gcc 4.4 and later, for 64-bit builds).
137 Code made available under Apache License version 2.0.
139 Specify "enable-ec_nistp_64_gcc_128" on the Configure (or config) command
140 line to include this in your build of OpenSSL, and run "make depend" (or
141 "make update"). This enables the following EC_METHODs:
143 EC_GFp_nistp224_method()
144 EC_GFp_nistp256_method()
145 EC_GFp_nistp521_method()
147 EC_GROUP_new_by_curve_name() will automatically use these (while
148 EC_GROUP_new_curve_GFp() currently prefers the more flexible
150 [Emilia Käsper, Adam Langley, Bodo Moeller (Google)]
152 *) Use type ossl_ssize_t instad of ssize_t which isn't available on
153 all platforms. Move ssize_t definition from e_os.h to the public
154 header file e_os2.h as it now appears in public header file cms.h
157 *) New -sigopt option to the ca, req and x509 utilities. Additional
158 signature parameters can be passed using this option and in
162 *) Add RSA PSS signing function. This will generate and set the
163 appropriate AlgorithmIdentifiers for PSS based on those in the
164 corresponding EVP_MD_CTX structure. No application support yet.
167 *) Support for companion algorithm specific ASN1 signing routines.
168 New function ASN1_item_sign_ctx() signs a pre-initialised
169 EVP_MD_CTX structure and sets AlgorithmIdentifiers based on
170 the appropriate parameters.
173 *) Add new algorithm specific ASN1 verification initialisation function
174 to EVP_PKEY_ASN1_METHOD: this is not in EVP_PKEY_METHOD since the ASN1
175 handling will be the same no matter what EVP_PKEY_METHOD is used.
176 Add a PSS handler to support verification of PSS signatures: checked
177 against a number of sample certificates.
180 *) Add signature printing for PSS. Add PSS OIDs.
181 [Steve Henson, Martin Kaiser <lists@kaiser.cx>]
183 *) Add algorithm specific signature printing. An individual ASN1 method
184 can now print out signatures instead of the standard hex dump.
186 More complex signatures (e.g. PSS) can print out more meaningful
187 information. Include DSA version that prints out the signature
191 *) Password based recipient info support for CMS library: implementing
195 *) Split password based encryption into PBES2 and PBKDF2 functions. This
196 neatly separates the code into cipher and PBE sections and is required
197 for some algorithms that split PBES2 into separate pieces (such as
201 *) Session-handling fixes:
202 - Fix handling of connections that are resuming with a session ID,
203 but also support Session Tickets.
204 - Fix a bug that suppressed issuing of a new ticket if the client
205 presented a ticket with an expired session.
206 - Try to set the ticket lifetime hint to something reasonable.
207 - Make tickets shorter by excluding irrelevant information.
208 - On the client side, don't ignore renewed tickets.
209 [Adam Langley, Bodo Moeller (Google)]
211 *) Fix PSK session representation.
214 *) Add RC4-MD5 and AESNI-SHA1 "stitched" implementations.
216 This work was sponsored by Intel.
219 *) Add GCM support to TLS library. Some custom code is needed to split
220 the IV between the fixed (from PRF) and explicit (from TLS record)
221 portions. This adds all GCM ciphersuites supported by RFC5288 and
222 RFC5289. Generalise some AES* cipherstrings to inlclude GCM and
223 add a special AESGCM string for GCM only.
226 *) Expand range of ctrls for AES GCM. Permit setting invocation
227 field on decrypt and retrieval of invocation field only on encrypt.
230 *) Add HMAC ECC ciphersuites from RFC5289. Include SHA384 PRF support.
231 As required by RFC5289 these ciphersuites cannot be used if for
232 versions of TLS earlier than 1.2.
235 *) For FIPS capable OpenSSL interpret a NULL default public key method
236 as unset and return the appopriate default but do *not* set the default.
237 This means we can return the appopriate method in applications that
238 swicth between FIPS and non-FIPS modes.
241 *) Redirect HMAC and CMAC operations to FIPS module in FIPS mode. If an
242 ENGINE is used then we cannot handle that in the FIPS module so we
243 keep original code iff non-FIPS operations are allowed.
246 *) Add -attime option to openssl utilities.
247 [Peter Eckersley <pde@eff.org>, Ben Laurie and Steve Henson]
249 *) Redirect DSA and DH operations to FIPS module in FIPS mode.
252 *) Redirect ECDSA and ECDH operations to FIPS module in FIPS mode. Also use
253 FIPS EC methods unconditionally for now.
256 *) New build option no-ec2m to disable characteristic 2 code.
259 *) Backport libcrypto audit of return value checking from 1.1.0-dev; not
260 all cases can be covered as some introduce binary incompatibilities.
263 *) Redirect RSA operations to FIPS module including keygen,
264 encrypt, decrypt, sign and verify. Block use of non FIPS RSA methods.
267 *) Add similar low level API blocking to ciphers.
270 *) Low level digest APIs are not approved in FIPS mode: any attempt
271 to use these will cause a fatal error. Applications that *really* want
272 to use them can use the private_* version instead.
275 *) Redirect cipher operations to FIPS module for FIPS builds.
278 *) Redirect digest operations to FIPS module for FIPS builds.
281 *) Update build system to add "fips" flag which will link in fipscanister.o
282 for static and shared library builds embedding a signature if needed.
285 *) Output TLS supported curves in preference order instead of numerical
286 order. This is currently hardcoded for the highest order curves first.
287 This should be configurable so applications can judge speed vs strength.
290 *) Add TLS v1.2 server support for client authentication.
293 *) Add support for FIPS mode in ssl library: disable SSLv3, non-FIPS ciphers
297 *) Functions FIPS_mode_set() and FIPS_mode() which call the underlying
298 FIPS modules versions.
301 *) Add TLS v1.2 client side support for client authentication. Keep cache
302 of handshake records longer as we don't know the hash algorithm to use
303 until after the certificate request message is received.
306 *) Initial TLS v1.2 client support. Add a default signature algorithms
307 extension including all the algorithms we support. Parse new signature
308 format in client key exchange. Relax some ECC signing restrictions for
309 TLS v1.2 as indicated in RFC5246.
312 *) Add server support for TLS v1.2 signature algorithms extension. Switch
313 to new signature format when needed using client digest preference.
314 All server ciphersuites should now work correctly in TLS v1.2. No client
315 support yet and no support for client certificates.
318 *) Initial TLS v1.2 support. Add new SHA256 digest to ssl code, switch
319 to SHA256 for PRF when using TLS v1.2 and later. Add new SHA256 based
320 ciphersuites. At present only RSA key exchange ciphersuites work with
321 TLS v1.2. Add new option for TLS v1.2 replacing the old and obsolete
322 SSL_OP_PKCS1_CHECK flags with SSL_OP_NO_TLSv1_2. New TLSv1.2 methods
323 and version checking.
326 *) New option OPENSSL_NO_SSL_INTERN. If an application can be compiled
327 with this defined it will not be affected by any changes to ssl internal
328 structures. Add several utility functions to allow openssl application
329 to work with OPENSSL_NO_SSL_INTERN defined.
333 [Tom Wu <tjw@cs.stanford.edu> and Ben Laurie]
335 *) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
338 *) Permit abbreviated handshakes when renegotiating using the function
339 SSL_renegotiate_abbreviated().
340 [Robin Seggelmann <seggelmann@fh-muenster.de>]
342 *) Add call to ENGINE_register_all_complete() to
343 ENGINE_load_builtin_engines(), so some implementations get used
344 automatically instead of needing explicit application support.
347 *) Add support for TLS key exporter as described in RFC5705.
348 [Robin Seggelmann <seggelmann@fh-muenster.de>, Steve Henson]
350 *) Initial TLSv1.1 support. Since TLSv1.1 is very similar to TLS v1.0 only
351 a few changes are required:
353 Add SSL_OP_NO_TLSv1_1 flag.
355 Update version checking logic to handle version 1.1.
356 Add explicit IV handling (ported from DTLS code).
357 Add command line options to s_client/s_server.
360 Changes between 1.0.0g and 1.0.0h [12 Mar 2012]
362 *) Fix MMA (Bleichenbacher's attack on PKCS #1 v1.5 RSA padding) weakness
363 in CMS and PKCS7 code. When RSA decryption fails use a random key for
364 content decryption and always return the same error. Note: this attack
365 needs on average 2^20 messages so it only affects automated senders. The
366 old behaviour can be reenabled in the CMS code by setting the
367 CMS_DEBUG_DECRYPT flag: this is useful for debugging and testing where
368 an MMA defence is not necessary.
369 Thanks to Ivan Nestlerode <inestlerode@us.ibm.com> for discovering
370 this issue. (CVE-2012-0884)
373 *) Fix CVE-2011-4619: make sure we really are receiving a
374 client hello before rejecting multiple SGC restarts. Thanks to
375 Ivan Nestlerode <inestlerode@us.ibm.com> for discovering this bug.
378 Changes between 1.0.0f and 1.0.0g [18 Jan 2012]
380 *) Fix for DTLS DoS issue introduced by fix for CVE-2011-4109.
381 Thanks to Antonio Martin, Enterprise Secure Access Research and
382 Development, Cisco Systems, Inc. for discovering this bug and
383 preparing a fix. (CVE-2012-0050)
386 Changes between 1.0.0e and 1.0.0f [4 Jan 2012]
388 *) Nadhem Alfardan and Kenny Paterson have discovered an extension
389 of the Vaudenay padding oracle attack on CBC mode encryption
390 which enables an efficient plaintext recovery attack against
391 the OpenSSL implementation of DTLS. Their attack exploits timing
392 differences arising during decryption processing. A research
393 paper describing this attack can be found at:
394 http://www.isg.rhul.ac.uk/~kp/dtls.pdf
395 Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
396 Security Group at Royal Holloway, University of London
397 (www.isg.rhul.ac.uk) for discovering this flaw and to Robin Seggelmann
398 <seggelmann@fh-muenster.de> and Michael Tuexen <tuexen@fh-muenster.de>
399 for preparing the fix. (CVE-2011-4108)
400 [Robin Seggelmann, Michael Tuexen]
402 *) Clear bytes used for block padding of SSL 3.0 records.
404 [Adam Langley (Google)]
406 *) Only allow one SGC handshake restart for SSL/TLS. Thanks to George
407 Kadianakis <desnacked@gmail.com> for discovering this issue and
408 Adam Langley for preparing the fix. (CVE-2011-4619)
409 [Adam Langley (Google)]
411 *) Check parameters are not NULL in GOST ENGINE. (CVE-2012-0027)
412 [Andrey Kulikov <amdeich@gmail.com>]
414 *) Prevent malformed RFC3779 data triggering an assertion failure.
415 Thanks to Andrew Chi, BBN Technologies, for discovering the flaw
416 and Rob Austein <sra@hactrn.net> for fixing it. (CVE-2011-4577)
417 [Rob Austein <sra@hactrn.net>]
419 *) Improved PRNG seeding for VOS.
420 [Paul Green <Paul.Green@stratus.com>]
422 *) Fix ssl_ciph.c set-up race.
423 [Adam Langley (Google)]
425 *) Fix spurious failures in ecdsatest.c.
426 [Emilia Käsper (Google)]
428 *) Fix the BIO_f_buffer() implementation (which was mixing different
429 interpretations of the '..._len' fields).
430 [Adam Langley (Google)]
432 *) Fix handling of BN_BLINDING: now BN_BLINDING_invert_ex (rather than
433 BN_BLINDING_invert_ex) calls BN_BLINDING_update, ensuring that concurrent
434 threads won't reuse the same blinding coefficients.
436 This also avoids the need to obtain the CRYPTO_LOCK_RSA_BLINDING
437 lock to call BN_BLINDING_invert_ex, and avoids one use of
438 BN_BLINDING_update for each BN_BLINDING structure (previously,
439 the last update always remained unused).
440 [Emilia Käsper (Google)]
442 *) In ssl3_clear, preserve s3->init_extra along with s3->rbuf.
443 [Bob Buckholz (Google)]
445 Changes between 1.0.0d and 1.0.0e [6 Sep 2011]
447 *) Fix bug where CRLs with nextUpdate in the past are sometimes accepted
448 by initialising X509_STORE_CTX properly. (CVE-2011-3207)
449 [Kaspar Brand <ossl@velox.ch>]
451 *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
452 for multi-threaded use of ECDH. (CVE-2011-3210)
453 [Adam Langley (Google)]
455 *) Fix x509_name_ex_d2i memory leak on bad inputs.
458 *) Remove hard coded ecdsaWithSHA1 signature tests in ssl code and check
459 signature public key algorithm by using OID xref utilities instead.
460 Before this you could only use some ECC ciphersuites with SHA1 only.
463 *) Add protection against ECDSA timing attacks as mentioned in the paper
464 by Billy Bob Brumley and Nicola Tuveri, see:
466 http://eprint.iacr.org/2011/232.pdf
468 [Billy Bob Brumley and Nicola Tuveri]
470 Changes between 1.0.0c and 1.0.0d [8 Feb 2011]
472 *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
473 [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
475 *) Fix bug in string printing code: if *any* escaping is enabled we must
476 escape the escape character (backslash) or the resulting string is
480 Changes between 1.0.0b and 1.0.0c [2 Dec 2010]
482 *) Disable code workaround for ancient and obsolete Netscape browsers
483 and servers: an attacker can use it in a ciphersuite downgrade attack.
484 Thanks to Martin Rex for discovering this bug. CVE-2010-4180
487 *) Fixed J-PAKE implementation error, originally discovered by
488 Sebastien Martini, further info and confirmation from Stefan
489 Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
492 Changes between 1.0.0a and 1.0.0b [16 Nov 2010]
494 *) Fix extension code to avoid race conditions which can result in a buffer
495 overrun vulnerability: resumed sessions must not be modified as they can
496 be shared by multiple threads. CVE-2010-3864
499 *) Fix WIN32 build system to correctly link an ENGINE directory into
503 Changes between 1.0.0 and 1.0.0a [01 Jun 2010]
505 *) Check return value of int_rsa_verify in pkey_rsa_verifyrecover
507 [Steve Henson, Peter-Michael Hager <hager@dortmund.net>]
509 Changes between 0.9.8n and 1.0.0 [29 Mar 2010]
511 *) Add "missing" function EVP_CIPHER_CTX_copy(). This copies a cipher
512 context. The operation can be customised via the ctrl mechanism in
513 case ENGINEs want to include additional functionality.
516 *) Tolerate yet another broken PKCS#8 key format: private key value negative.
519 *) Add new -subject_hash_old and -issuer_hash_old options to x509 utility to
520 output hashes compatible with older versions of OpenSSL.
521 [Willy Weisz <weisz@vcpc.univie.ac.at>]
523 *) Fix compression algorithm handling: if resuming a session use the
524 compression algorithm of the resumed session instead of determining
525 it from client hello again. Don't allow server to change algorithm.
528 *) Add load_crls() function to apps tidying load_certs() too. Add option
529 to verify utility to allow additional CRLs to be included.
532 *) Update OCSP request code to permit adding custom headers to the request:
533 some responders need this.
536 *) The function EVP_PKEY_sign() returns <=0 on error: check return code
538 [Julia Lawall <julia@diku.dk>]
540 *) Update verify callback code in apps/s_cb.c and apps/verify.c, it
541 needlessly dereferenced structures, used obsolete functions and
542 didn't handle all updated verify codes correctly.
545 *) Disable MD2 in the default configuration.
548 *) In BIO_pop() and BIO_push() use the ctrl argument (which was NULL) to
549 indicate the initial BIO being pushed or popped. This makes it possible
550 to determine whether the BIO is the one explicitly called or as a result
551 of the ctrl being passed down the chain. Fix BIO_pop() and SSL BIOs so
552 it handles reference counts correctly and doesn't zero out the I/O bio
553 when it is not being explicitly popped. WARNING: applications which
554 included workarounds for the old buggy behaviour will need to be modified
555 or they could free up already freed BIOs.
558 *) Extend the uni2asc/asc2uni => OPENSSL_uni2asc/OPENSSL_asc2uni
559 renaming to all platforms (within the 0.9.8 branch, this was
560 done conditionally on Netware platforms to avoid a name clash).
561 [Guenter <lists@gknw.net>]
563 *) Add ECDHE and PSK support to DTLS.
564 [Michael Tuexen <tuexen@fh-muenster.de>]
566 *) Add CHECKED_STACK_OF macro to safestack.h, otherwise safestack can't
570 *) Add "missing" function EVP_MD_flags() (without this the only way to
571 retrieve a digest flags is by accessing the structure directly. Update
572 EVP_MD_do_all*() and EVP_CIPHER_do_all*() to include the name a digest
573 or cipher is registered as in the "from" argument. Print out all
574 registered digests in the dgst usage message instead of manually
575 attempting to work them out.
578 *) If no SSLv2 ciphers are used don't use an SSLv2 compatible client hello:
579 this allows the use of compression and extensions. Change default cipher
580 string to remove SSLv2 ciphersuites. This effectively avoids ancient SSLv2
581 by default unless an application cipher string requests it.
584 *) Alter match criteria in PKCS12_parse(). It used to try to use local
585 key ids to find matching certificates and keys but some PKCS#12 files
586 don't follow the (somewhat unwritten) rules and this strategy fails.
587 Now just gather all certificates together and the first private key
588 then look for the first certificate that matches the key.
591 *) Support use of registered digest and cipher names for dgst and cipher
592 commands instead of having to add each one as a special case. So now
599 openssl dgst -sha256 foo
601 and this works for ENGINE based algorithms too.
605 *) Update Gost ENGINE to support parameter files.
606 [Victor B. Wagner <vitus@cryptocom.ru>]
608 *) Support GeneralizedTime in ca utility.
609 [Oliver Martin <oliver@volatilevoid.net>, Steve Henson]
611 *) Enhance the hash format used for certificate directory links. The new
612 form uses the canonical encoding (meaning equivalent names will work
613 even if they aren't identical) and uses SHA1 instead of MD5. This form
614 is incompatible with the older format and as a result c_rehash should
615 be used to rebuild symbolic links.
618 *) Make PKCS#8 the default write format for private keys, replacing the
619 traditional format. This form is standardised, more secure and doesn't
620 include an implicit MD5 dependency.
623 *) Add a $gcc_devteam_warn option to Configure. The idea is that any code
624 committed to OpenSSL should pass this lot as a minimum.
627 *) Add session ticket override functionality for use by EAP-FAST.
628 [Jouni Malinen <j@w1.fi>]
630 *) Modify HMAC functions to return a value. Since these can be implemented
631 in an ENGINE errors can occur.
634 *) Type-checked OBJ_bsearch_ex.
637 *) Type-checked OBJ_bsearch. Also some constification necessitated
638 by type-checking. Still to come: TXT_DB, bsearch(?),
639 OBJ_bsearch_ex, qsort, CRYPTO_EX_DATA, ASN1_VALUE, ASN1_STRING,
643 *) New function OPENSSL_gmtime_adj() to add a specific number of days and
644 seconds to a tm structure directly, instead of going through OS
645 specific date routines. This avoids any issues with OS routines such
646 as the year 2038 bug. New *_adj() functions for ASN1 time structures
647 and X509_time_adj_ex() to cover the extended range. The existing
648 X509_time_adj() is still usable and will no longer have any date issues.
651 *) Delta CRL support. New use deltas option which will attempt to locate
652 and search any appropriate delta CRLs available.
654 This work was sponsored by Google.
657 *) Support for CRLs partitioned by reason code. Reorganise CRL processing
658 code and add additional score elements. Validate alternate CRL paths
659 as part of the CRL checking and indicate a new error "CRL path validation
660 error" in this case. Applications wanting additional details can use
661 the verify callback and check the new "parent" field. If this is not
662 NULL CRL path validation is taking place. Existing applications wont
663 see this because it requires extended CRL support which is off by
666 This work was sponsored by Google.
669 *) Support for freshest CRL extension.
671 This work was sponsored by Google.
674 *) Initial indirect CRL support. Currently only supported in the CRLs
675 passed directly and not via lookup. Process certificate issuer
676 CRL entry extension and lookup CRL entries by bother issuer name
677 and serial number. Check and process CRL issuer entry in IDP extension.
679 This work was sponsored by Google.
682 *) Add support for distinct certificate and CRL paths. The CRL issuer
683 certificate is validated separately in this case. Only enabled if
684 an extended CRL support flag is set: this flag will enable additional
685 CRL functionality in future.
687 This work was sponsored by Google.
690 *) Add support for policy mappings extension.
692 This work was sponsored by Google.
695 *) Fixes to pathlength constraint, self issued certificate handling,
696 policy processing to align with RFC3280 and PKITS tests.
698 This work was sponsored by Google.
701 *) Support for name constraints certificate extension. DN, email, DNS
702 and URI types are currently supported.
704 This work was sponsored by Google.
707 *) To cater for systems that provide a pointer-based thread ID rather
708 than numeric, deprecate the current numeric thread ID mechanism and
709 replace it with a structure and associated callback type. This
710 mechanism allows a numeric "hash" to be extracted from a thread ID in
711 either case, and on platforms where pointers are larger than 'long',
712 mixing is done to help ensure the numeric 'hash' is usable even if it
713 can't be guaranteed unique. The default mechanism is to use "&errno"
714 as a pointer-based thread ID to distinguish between threads.
716 Applications that want to provide their own thread IDs should now use
717 CRYPTO_THREADID_set_callback() to register a callback that will call
718 either CRYPTO_THREADID_set_numeric() or CRYPTO_THREADID_set_pointer().
720 Note that ERR_remove_state() is now deprecated, because it is tied
721 to the assumption that thread IDs are numeric. ERR_remove_state(0)
722 to free the current thread's error state should be replaced by
723 ERR_remove_thread_state(NULL).
725 (This new approach replaces the functions CRYPTO_set_idptr_callback(),
726 CRYPTO_get_idptr_callback(), and CRYPTO_thread_idptr() that existed in
727 OpenSSL 0.9.9-dev between June 2006 and August 2008. Also, if an
728 application was previously providing a numeric thread callback that
729 was inappropriate for distinguishing threads, then uniqueness might
730 have been obtained with &errno that happened immediately in the
731 intermediate development versions of OpenSSL; this is no longer the
732 case, the numeric thread callback will now override the automatic use
734 [Geoff Thorpe, with help from Bodo Moeller]
736 *) Initial support for different CRL issuing certificates. This covers a
737 simple case where the self issued certificates in the chain exist and
738 the real CRL issuer is higher in the existing chain.
740 This work was sponsored by Google.
743 *) Removed effectively defunct crypto/store from the build.
746 *) Revamp of STACK to provide stronger type-checking. Still to come:
747 TXT_DB, bsearch(?), OBJ_bsearch, qsort, CRYPTO_EX_DATA, ASN1_VALUE,
748 ASN1_STRING, CONF_VALUE.
751 *) Add a new SSL_MODE_RELEASE_BUFFERS mode flag to release unused buffer
752 RAM on SSL connections. This option can save about 34k per idle SSL.
755 *) Revamp of LHASH to provide stronger type-checking. Still to come:
756 STACK, TXT_DB, bsearch, qsort.
759 *) Initial support for Cryptographic Message Syntax (aka CMS) based
760 on RFC3850, RFC3851 and RFC3852. New cms directory and cms utility,
761 support for data, signedData, compressedData, digestedData and
762 encryptedData, envelopedData types included. Scripts to check against
763 RFC4134 examples draft and interop and consistency checks of many
764 content types and variants.
767 *) Add options to enc utility to support use of zlib compression BIO.
770 *) Extend mk1mf to support importing of options and assembly language
771 files from Configure script, currently only included in VC-WIN32.
772 The assembly language rules can now optionally generate the source
773 files from the associated perl scripts.
776 *) Implement remaining functionality needed to support GOST ciphersuites.
777 Interop testing has been performed using CryptoPro implementations.
778 [Victor B. Wagner <vitus@cryptocom.ru>]
780 *) s390x assembler pack.
783 *) ARMv4 assembler pack. ARMv4 refers to v4 and later ISA, not CPU
787 *) Implement Opaque PRF Input TLS extension as specified in
788 draft-rescorla-tls-opaque-prf-input-00.txt. Since this is not an
789 official specification yet and no extension type assignment by
790 IANA exists, this extension (for now) will have to be explicitly
791 enabled when building OpenSSL by providing the extension number
792 to use. For example, specify an option
794 -DTLSEXT_TYPE_opaque_prf_input=0x9527
796 to the "config" or "Configure" script to enable the extension,
797 assuming extension number 0x9527 (which is a completely arbitrary
798 and unofficial assignment based on the MD5 hash of the Internet
799 Draft). Note that by doing so, you potentially lose
800 interoperability with other TLS implementations since these might
801 be using the same extension number for other purposes.
803 SSL_set_tlsext_opaque_prf_input(ssl, src, len) is used to set the
804 opaque PRF input value to use in the handshake. This will create
805 an interal copy of the length-'len' string at 'src', and will
806 return non-zero for success.
808 To get more control and flexibility, provide a callback function
811 SSL_CTX_set_tlsext_opaque_prf_input_callback(ctx, cb)
812 SSL_CTX_set_tlsext_opaque_prf_input_callback_arg(ctx, arg)
816 int (*cb)(SSL *, void *peerinput, size_t len, void *arg);
819 Callback function 'cb' will be called in handshakes, and is
820 expected to use SSL_set_tlsext_opaque_prf_input() as appropriate.
821 Argument 'arg' is for application purposes (the value as given to
822 SSL_CTX_set_tlsext_opaque_prf_input_callback_arg() will directly
823 be provided to the callback function). The callback function
824 has to return non-zero to report success: usually 1 to use opaque
825 PRF input just if possible, or 2 to enforce use of the opaque PRF
826 input. In the latter case, the library will abort the handshake
827 if opaque PRF input is not successfully negotiated.
829 Arguments 'peerinput' and 'len' given to the callback function
830 will always be NULL and 0 in the case of a client. A server will
831 see the client's opaque PRF input through these variables if
832 available (NULL and 0 otherwise). Note that if the server
833 provides an opaque PRF input, the length must be the same as the
834 length of the client's opaque PRF input.
836 Note that the callback function will only be called when creating
837 a new session (session resumption can resume whatever was
838 previously negotiated), and will not be called in SSL 2.0
839 handshakes; thus, SSL_CTX_set_options(ctx, SSL_OP_NO_SSLv2) or
840 SSL_set_options(ssl, SSL_OP_NO_SSLv2) is especially recommended
841 for applications that need to enforce opaque PRF input.
845 *) Update ssl code to support digests other than SHA1+MD5 for handshake
848 [Victor B. Wagner <vitus@cryptocom.ru>]
850 *) Add RFC4507 support to OpenSSL. This includes the corrections in
851 RFC4507bis. The encrypted ticket format is an encrypted encoded
852 SSL_SESSION structure, that way new session features are automatically
855 If a client application caches session in an SSL_SESSION structure
856 support is transparent because tickets are now stored in the encoded
859 The SSL_CTX structure automatically generates keys for ticket
860 protection in servers so again support should be possible
861 with no application modification.
863 If a client or server wishes to disable RFC4507 support then the option
864 SSL_OP_NO_TICKET can be set.
866 Add a TLS extension debugging callback to allow the contents of any client
867 or server extensions to be examined.
869 This work was sponsored by Google.
872 *) Final changes to avoid use of pointer pointer casts in OpenSSL.
873 OpenSSL should now compile cleanly on gcc 4.2
874 [Peter Hartley <pdh@utter.chaos.org.uk>, Steve Henson]
876 *) Update SSL library to use new EVP_PKEY MAC API. Include generic MAC
877 support including streaming MAC support: this is required for GOST
879 [Victor B. Wagner <vitus@cryptocom.ru>, Steve Henson]
881 *) Add option -stream to use PKCS#7 streaming in smime utility. New
882 function i2d_PKCS7_bio_stream() and PEM_write_PKCS7_bio_stream()
883 to output in BER and PEM format.
886 *) Experimental support for use of HMAC via EVP_PKEY interface. This
887 allows HMAC to be handled via the EVP_DigestSign*() interface. The
888 EVP_PKEY "key" in this case is the HMAC key, potentially allowing
889 ENGINE support for HMAC keys which are unextractable. New -mac and
890 -macopt options to dgst utility.
893 *) New option -sigopt to dgst utility. Update dgst to use
894 EVP_Digest{Sign,Verify}*. These two changes make it possible to use
895 alternative signing paramaters such as X9.31 or PSS in the dgst
899 *) Change ssl_cipher_apply_rule(), the internal function that does
900 the work each time a ciphersuite string requests enabling
901 ("foo+bar"), moving ("+foo+bar"), disabling ("-foo+bar", or
902 removing ("!foo+bar") a class of ciphersuites: Now it maintains
903 the order of disabled ciphersuites such that those ciphersuites
904 that most recently went from enabled to disabled not only stay
905 in order with respect to each other, but also have higher priority
906 than other disabled ciphersuites the next time ciphersuites are
909 This means that you can now say, e.g., "PSK:-PSK:HIGH" to enable
910 the same ciphersuites as with "HIGH" alone, but in a specific
911 order where the PSK ciphersuites come first (since they are the
912 most recently disabled ciphersuites when "HIGH" is parsed).
914 Also, change ssl_create_cipher_list() (using this new
915 funcionality) such that between otherwise identical
916 cihpersuites, ephemeral ECDH is preferred over ephemeral DH in
920 *) Change ssl_create_cipher_list() so that it automatically
921 arranges the ciphersuites in reasonable order before starting
922 to process the rule string. Thus, the definition for "DEFAULT"
923 (SSL_DEFAULT_CIPHER_LIST) now is just "ALL:!aNULL:!eNULL", but
924 remains equivalent to "AES:ALL:!aNULL:!eNULL:+aECDH:+kRSA:+RC4:@STRENGTH".
925 This makes it much easier to arrive at a reasonable default order
926 in applications for which anonymous ciphers are OK (meaning
927 that you can't actually use DEFAULT).
928 [Bodo Moeller; suggested by Victor Duchovni]
930 *) Split the SSL/TLS algorithm mask (as used for ciphersuite string
931 processing) into multiple integers instead of setting
932 "SSL_MKEY_MASK" bits, "SSL_AUTH_MASK" bits, "SSL_ENC_MASK",
933 "SSL_MAC_MASK", and "SSL_SSL_MASK" bits all in a single integer.
934 (These masks as well as the individual bit definitions are hidden
935 away into the non-exported interface ssl/ssl_locl.h, so this
936 change to the definition of the SSL_CIPHER structure shouldn't
937 affect applications.) This give us more bits for each of these
938 categories, so there is no longer a need to coagulate AES128 and
939 AES256 into a single algorithm bit, and to coagulate Camellia128
940 and Camellia256 into a single algorithm bit, which has led to all
943 Thus, among other things, the kludge introduced in 0.9.7m and
944 0.9.8e for masking out AES256 independently of AES128 or masking
945 out Camellia256 independently of AES256 is not needed here in 0.9.9.
947 With the change, we also introduce new ciphersuite aliases that
948 so far were missing: "AES128", "AES256", "CAMELLIA128", and
952 *) Add support for dsa-with-SHA224 and dsa-with-SHA256.
953 Use the leftmost N bytes of the signature input if the input is
954 larger than the prime q (with N being the size in bytes of q).
957 *) Very *very* experimental PKCS#7 streaming encoder support. Nothing uses
958 it yet and it is largely untested.
961 *) Add support for the ecdsa-with-SHA224/256/384/512 signature types.
964 *) Initial incomplete changes to avoid need for function casts in OpenSSL
965 some compilers (gcc 4.2 and later) reject their use. Safestack is
966 reimplemented. Update ASN1 to avoid use of legacy functions.
969 *) Win32/64 targets are linked with Winsock2.
972 *) Add an X509_CRL_METHOD structure to allow CRL processing to be redirected
973 to external functions. This can be used to increase CRL handling
974 efficiency especially when CRLs are very large by (for example) storing
975 the CRL revoked certificates in a database.
978 *) Overhaul of by_dir code. Add support for dynamic loading of CRLs so
979 new CRLs added to a directory can be used. New command line option
980 -verify_return_error to s_client and s_server. This causes real errors
981 to be returned by the verify callback instead of carrying on no matter
982 what. This reflects the way a "real world" verify callback would behave.
985 *) GOST engine, supporting several GOST algorithms and public key formats.
986 Kindly donated by Cryptocom.
989 *) Partial support for Issuing Distribution Point CRL extension. CRLs
990 partitioned by DP are handled but no indirect CRL or reason partitioning
991 (yet). Complete overhaul of CRL handling: now the most suitable CRL is
992 selected via a scoring technique which handles IDP and AKID in CRLs.
995 *) New X509_STORE_CTX callbacks lookup_crls() and lookup_certs() which
996 will ultimately be used for all verify operations: this will remove the
997 X509_STORE dependency on certificate verification and allow alternative
998 lookup methods. X509_STORE based implementations of these two callbacks.
1001 *) Allow multiple CRLs to exist in an X509_STORE with matching issuer names.
1002 Modify get_crl() to find a valid (unexpired) CRL if possible.
1005 *) New function X509_CRL_match() to check if two CRLs are identical. Normally
1006 this would be called X509_CRL_cmp() but that name is already used by
1007 a function that just compares CRL issuer names. Cache several CRL
1008 extensions in X509_CRL structure and cache CRLDP in X509.
1011 *) Store a "canonical" representation of X509_NAME structure (ASN1 Name)
1012 this maps equivalent X509_NAME structures into a consistent structure.
1013 Name comparison can then be performed rapidly using memcmp().
1016 *) Non-blocking OCSP request processing. Add -timeout option to ocsp
1020 *) Allow digests to supply their own micalg string for S/MIME type using
1021 the ctrl EVP_MD_CTRL_MICALG.
1024 *) During PKCS7 signing pass the PKCS7 SignerInfo structure to the
1025 EVP_PKEY_METHOD before and after signing via the EVP_PKEY_CTRL_PKCS7_SIGN
1026 ctrl. It can then customise the structure before and/or after signing
1030 *) New function OBJ_add_sigid() to allow application defined signature OIDs
1031 to be added to OpenSSLs internal tables. New function OBJ_sigid_free()
1032 to free up any added signature OIDs.
1035 *) New functions EVP_CIPHER_do_all(), EVP_CIPHER_do_all_sorted(),
1036 EVP_MD_do_all() and EVP_MD_do_all_sorted() to enumerate internal
1037 digest and cipher tables. New options added to openssl utility:
1038 list-message-digest-algorithms and list-cipher-algorithms.
1041 *) Change the array representation of binary polynomials: the list
1042 of degrees of non-zero coefficients is now terminated with -1.
1043 Previously it was terminated with 0, which was also part of the
1044 value; thus, the array representation was not applicable to
1045 polynomials where t^0 has coefficient zero. This change makes
1046 the array representation useful in a more general context.
1049 *) Various modifications and fixes to SSL/TLS cipher string
1050 handling. For ECC, the code now distinguishes between fixed ECDH
1051 with RSA certificates on the one hand and with ECDSA certificates
1052 on the other hand, since these are separate ciphersuites. The
1053 unused code for Fortezza ciphersuites has been removed.
1055 For consistency with EDH, ephemeral ECDH is now called "EECDH"
1056 (not "ECDHE"). For consistency with the code for DH
1057 certificates, use of ECDH certificates is now considered ECDH
1058 authentication, not RSA or ECDSA authentication (the latter is
1059 merely the CA's signing algorithm and not actively used in the
1062 The temporary ciphersuite alias "ECCdraft" is no longer
1063 available, and ECC ciphersuites are no longer excluded from "ALL"
1064 and "DEFAULT". The following aliases now exist for RFC 4492
1065 ciphersuites, most of these by analogy with the DH case:
1067 kECDHr - ECDH cert, signed with RSA
1068 kECDHe - ECDH cert, signed with ECDSA
1069 kECDH - ECDH cert (signed with either RSA or ECDSA)
1070 kEECDH - ephemeral ECDH
1071 ECDH - ECDH cert or ephemeral ECDH
1077 AECDH - anonymous ECDH
1078 EECDH - non-anonymous ephemeral ECDH (equivalent to "kEECDH:-AECDH")
1082 *) Add additional S/MIME capabilities for AES and GOST ciphers if supported.
1083 Use correct micalg parameters depending on digest(s) in signed message.
1086 *) Add engine support for EVP_PKEY_ASN1_METHOD. Add functions to process
1087 an ENGINE asn1 method. Support ENGINE lookups in the ASN1 code.
1090 *) Initial engine support for EVP_PKEY_METHOD. New functions to permit
1091 an engine to register a method. Add ENGINE lookups for methods and
1092 functional reference processing.
1095 *) New functions EVP_Digest{Sign,Verify)*. These are enchance versions of
1096 EVP_{Sign,Verify}* which allow an application to customise the signature
1100 *) New -resign option to smime utility. This adds one or more signers
1101 to an existing PKCS#7 signedData structure. Also -md option to use an
1102 alternative message digest algorithm for signing.
1105 *) Tidy up PKCS#7 routines and add new functions to make it easier to
1106 create PKCS7 structures containing multiple signers. Update smime
1107 application to support multiple signers.
1110 *) New -macalg option to pkcs12 utility to allow setting of an alternative
1114 *) Initial support for PKCS#5 v2.0 PRFs other than default SHA1 HMAC.
1115 Reorganize PBE internals to lookup from a static table using NIDs,
1116 add support for HMAC PBE OID translation. Add a EVP_CIPHER ctrl:
1117 EVP_CTRL_PBE_PRF_NID this allows a cipher to specify an alternative
1118 PRF which will be automatically used with PBES2.
1121 *) Replace the algorithm specific calls to generate keys in "req" with the
1125 *) Update PKCS#7 enveloped data routines to use new API. This is now
1126 supported by any public key method supporting the encrypt operation. A
1127 ctrl is added to allow the public key algorithm to examine or modify
1128 the PKCS#7 RecipientInfo structure if it needs to: for RSA this is
1132 *) Add a ctrl to asn1 method to allow a public key algorithm to express
1133 a default digest type to use. In most cases this will be SHA1 but some
1134 algorithms (such as GOST) need to specify an alternative digest. The
1135 return value indicates how strong the prefernce is 1 means optional and
1136 2 is mandatory (that is it is the only supported type). Modify
1137 ASN1_item_sign() to accept a NULL digest argument to indicate it should
1138 use the default md. Update openssl utilities to use the default digest
1139 type for signing if it is not explicitly indicated.
1142 *) Use OID cross reference table in ASN1_sign() and ASN1_verify(). New
1143 EVP_MD flag EVP_MD_FLAG_PKEY_METHOD_SIGNATURE. This uses the relevant
1144 signing method from the key type. This effectively removes the link
1145 between digests and public key types.
1148 *) Add an OID cross reference table and utility functions. Its purpose is to
1149 translate between signature OIDs such as SHA1WithrsaEncryption and SHA1,
1150 rsaEncryption. This will allow some of the algorithm specific hackery
1151 needed to use the correct OID to be removed.
1154 *) Remove algorithm specific dependencies when setting PKCS7_SIGNER_INFO
1155 structures for PKCS7_sign(). They are now set up by the relevant public
1159 *) Add provisional EC pkey method with support for ECDSA and ECDH.
1162 *) Add support for key derivation (agreement) in the API, DH method and
1166 *) Add DSA pkey method and DH pkey methods, extend DH ASN1 method to support
1167 public and private key formats. As a side effect these add additional
1168 command line functionality not previously available: DSA signatures can be
1169 generated and verified using pkeyutl and DH key support and generation in
1174 [Oliver Tappe <zooey@hirschkaefer.de>]
1176 *) New make target "install_html_docs" installs HTML renditions of the
1178 [Oliver Tappe <zooey@hirschkaefer.de>]
1180 *) New utility "genpkey" this is analagous to "genrsa" etc except it can
1181 generate keys for any algorithm. Extend and update EVP_PKEY_METHOD to
1182 support key and parameter generation and add initial key generation
1183 functionality for RSA.
1186 *) Add functions for main EVP_PKEY_method operations. The undocumented
1187 functions EVP_PKEY_{encrypt,decrypt} have been renamed to
1188 EVP_PKEY_{encrypt,decrypt}_old.
1191 *) Initial definitions for EVP_PKEY_METHOD. This will be a high level public
1192 key API, doesn't do much yet.
1195 *) New function EVP_PKEY_asn1_get0_info() to retrieve information about
1196 public key algorithms. New option to openssl utility:
1197 "list-public-key-algorithms" to print out info.
1200 *) Implement the Supported Elliptic Curves Extension for
1201 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
1204 *) Don't free up OIDs in OBJ_cleanup() if they are in use by EVP_MD or
1205 EVP_CIPHER structures to avoid later problems in EVP_cleanup().
1208 *) New utilities pkey and pkeyparam. These are similar to algorithm specific
1209 utilities such as rsa, dsa, dsaparam etc except they process any key
1213 *) Transfer public key printing routines to EVP_PKEY_ASN1_METHOD. New
1214 functions EVP_PKEY_print_public(), EVP_PKEY_print_private(),
1215 EVP_PKEY_print_param() to print public key data from an EVP_PKEY
1219 *) Initial support for pluggable public key ASN1.
1220 De-spaghettify the public key ASN1 handling. Move public and private
1221 key ASN1 handling to a new EVP_PKEY_ASN1_METHOD structure. Relocate
1222 algorithm specific handling to a single module within the relevant
1223 algorithm directory. Add functions to allow (near) opaque processing
1224 of public and private key structures.
1227 *) Implement the Supported Point Formats Extension for
1228 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
1231 *) Add initial support for RFC 4279 PSK TLS ciphersuites. Add members
1232 for the psk identity [hint] and the psk callback functions to the
1233 SSL_SESSION, SSL and SSL_CTX structure.
1236 PSK-RC4-SHA, PSK-3DES-EDE-CBC-SHA, PSK-AES128-CBC-SHA,
1240 SSL_CTX_use_psk_identity_hint
1241 SSL_get_psk_identity_hint
1242 SSL_get_psk_identity
1243 SSL_use_psk_identity_hint
1245 [Mika Kousa and Pasi Eronen of Nokia Corporation]
1247 *) Add RFC 3161 compliant time stamp request creation, response generation
1248 and response verification functionality.
1249 [Zoltán Glózik <zglozik@opentsa.org>, The OpenTSA Project]
1251 *) Add initial support for TLS extensions, specifically for the server_name
1252 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
1253 have new members for a host name. The SSL data structure has an
1254 additional member SSL_CTX *initial_ctx so that new sessions can be
1255 stored in that context to allow for session resumption, even after the
1256 SSL has been switched to a new SSL_CTX in reaction to a client's
1257 server_name extension.
1259 New functions (subject to change):
1261 SSL_get_servername()
1262 SSL_get_servername_type()
1265 New CTRL codes and macros (subject to change):
1267 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
1268 - SSL_CTX_set_tlsext_servername_callback()
1269 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
1270 - SSL_CTX_set_tlsext_servername_arg()
1271 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
1273 openssl s_client has a new '-servername ...' option.
1275 openssl s_server has new options '-servername_host ...', '-cert2 ...',
1276 '-key2 ...', '-servername_fatal' (subject to change). This allows
1277 testing the HostName extension for a specific single host name ('-cert'
1278 and '-key' remain fallbacks for handshakes without HostName
1279 negotiation). If the unrecogninzed_name alert has to be sent, this by
1280 default is a warning; it becomes fatal with the '-servername_fatal'
1283 [Peter Sylvester, Remy Allais, Christophe Renou]
1285 *) Whirlpool hash implementation is added.
1288 *) BIGNUM code on 64-bit SPARCv9 targets is switched from bn(64,64) to
1289 bn(64,32). Because of instruction set limitations it doesn't have
1290 any negative impact on performance. This was done mostly in order
1291 to make it possible to share assembler modules, such as bn_mul_mont
1292 implementations, between 32- and 64-bit builds without hassle.
1295 *) Move code previously exiled into file crypto/ec/ec2_smpt.c
1296 to ec2_smpl.c, and no longer require the OPENSSL_EC_BIN_PT_COMP
1300 *) New candidate for BIGNUM assembler implementation, bn_mul_mont,
1301 dedicated Montgomery multiplication procedure, is introduced.
1302 BN_MONT_CTX is modified to allow bn_mul_mont to reach for higher
1303 "64-bit" performance on certain 32-bit targets.
1306 *) New option SSL_OP_NO_COMP to disable use of compression selectively
1307 in SSL structures. New SSL ctrl to set maximum send fragment size.
1308 Save memory by seeting the I/O buffer sizes dynamically instead of
1309 using the maximum available value.
1312 *) New option -V for 'openssl ciphers'. This prints the ciphersuite code
1313 in addition to the text details.
1316 *) Very, very preliminary EXPERIMENTAL support for printing of general
1317 ASN1 structures. This currently produces rather ugly output and doesn't
1318 handle several customised structures at all.
1321 *) Integrated support for PVK file format and some related formats such
1322 as MS PUBLICKEYBLOB and PRIVATEKEYBLOB. Command line switches to support
1323 these in the 'rsa' and 'dsa' utilities.
1326 *) Support for PKCS#1 RSAPublicKey format on rsa utility command line.
1329 *) Remove the ancient ASN1_METHOD code. This was only ever used in one
1330 place for the (very old) "NETSCAPE" format certificates which are now
1331 handled using new ASN1 code equivalents.
1334 *) Let the TLSv1_method() etc. functions return a 'const' SSL_METHOD
1335 pointer and make the SSL_METHOD parameter in SSL_CTX_new,
1336 SSL_CTX_set_ssl_version and SSL_set_ssl_method 'const'.
1339 *) Modify CRL distribution points extension code to print out previously
1340 unsupported fields. Enhance extension setting code to allow setting of
1344 *) Add print and set support for Issuing Distribution Point CRL extension.
1347 *) Change 'Configure' script to enable Camellia by default.
1350 Changes between 0.9.8s and 0.9.8t [18 Jan 2012]
1352 *) Fix for DTLS DoS issue introduced by fix for CVE-2011-4109.
1353 Thanks to Antonio Martin, Enterprise Secure Access Research and
1354 Development, Cisco Systems, Inc. for discovering this bug and
1355 preparing a fix. (CVE-2012-0050)
1358 Changes between 0.9.8r and 0.9.8s [4 Jan 2012]
1360 *) Nadhem Alfardan and Kenny Paterson have discovered an extension
1361 of the Vaudenay padding oracle attack on CBC mode encryption
1362 which enables an efficient plaintext recovery attack against
1363 the OpenSSL implementation of DTLS. Their attack exploits timing
1364 differences arising during decryption processing. A research
1365 paper describing this attack can be found at:
1366 http://www.isg.rhul.ac.uk/~kp/dtls.pdf
1367 Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
1368 Security Group at Royal Holloway, University of London
1369 (www.isg.rhul.ac.uk) for discovering this flaw and to Robin Seggelmann
1370 <seggelmann@fh-muenster.de> and Michael Tuexen <tuexen@fh-muenster.de>
1371 for preparing the fix. (CVE-2011-4108)
1372 [Robin Seggelmann, Michael Tuexen]
1374 *) Stop policy check failure freeing same buffer twice. (CVE-2011-4109)
1375 [Ben Laurie, Kasper <ekasper@google.com>]
1377 *) Clear bytes used for block padding of SSL 3.0 records.
1379 [Adam Langley (Google)]
1381 *) Only allow one SGC handshake restart for SSL/TLS. Thanks to George
1382 Kadianakis <desnacked@gmail.com> for discovering this issue and
1383 Adam Langley for preparing the fix. (CVE-2011-4619)
1384 [Adam Langley (Google)]
1386 *) Prevent malformed RFC3779 data triggering an assertion failure.
1387 Thanks to Andrew Chi, BBN Technologies, for discovering the flaw
1388 and Rob Austein <sra@hactrn.net> for fixing it. (CVE-2011-4577)
1389 [Rob Austein <sra@hactrn.net>]
1391 *) Fix ssl_ciph.c set-up race.
1392 [Adam Langley (Google)]
1394 *) Fix spurious failures in ecdsatest.c.
1395 [Emilia Käsper (Google)]
1397 *) Fix the BIO_f_buffer() implementation (which was mixing different
1398 interpretations of the '..._len' fields).
1399 [Adam Langley (Google)]
1401 *) Fix handling of BN_BLINDING: now BN_BLINDING_invert_ex (rather than
1402 BN_BLINDING_invert_ex) calls BN_BLINDING_update, ensuring that concurrent
1403 threads won't reuse the same blinding coefficients.
1405 This also avoids the need to obtain the CRYPTO_LOCK_RSA_BLINDING
1406 lock to call BN_BLINDING_invert_ex, and avoids one use of
1407 BN_BLINDING_update for each BN_BLINDING structure (previously,
1408 the last update always remained unused).
1409 [Emilia Käsper (Google)]
1411 *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
1412 for multi-threaded use of ECDH.
1413 [Adam Langley (Google)]
1415 *) Fix x509_name_ex_d2i memory leak on bad inputs.
1418 *) Add protection against ECDSA timing attacks as mentioned in the paper
1419 by Billy Bob Brumley and Nicola Tuveri, see:
1421 http://eprint.iacr.org/2011/232.pdf
1423 [Billy Bob Brumley and Nicola Tuveri]
1425 Changes between 0.9.8q and 0.9.8r [8 Feb 2011]
1427 *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
1428 [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
1430 *) Fix bug in string printing code: if *any* escaping is enabled we must
1431 escape the escape character (backslash) or the resulting string is
1435 Changes between 0.9.8p and 0.9.8q [2 Dec 2010]
1437 *) Disable code workaround for ancient and obsolete Netscape browsers
1438 and servers: an attacker can use it in a ciphersuite downgrade attack.
1439 Thanks to Martin Rex for discovering this bug. CVE-2010-4180
1442 *) Fixed J-PAKE implementation error, originally discovered by
1443 Sebastien Martini, further info and confirmation from Stefan
1444 Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
1447 Changes between 0.9.8o and 0.9.8p [16 Nov 2010]
1449 *) Fix extension code to avoid race conditions which can result in a buffer
1450 overrun vulnerability: resumed sessions must not be modified as they can
1451 be shared by multiple threads. CVE-2010-3864
1454 *) Fix for double free bug in ssl/s3_clnt.c CVE-2010-2939
1457 *) Don't reencode certificate when calculating signature: cache and use
1458 the original encoding instead. This makes signature verification of
1459 some broken encodings work correctly.
1462 *) ec2_GF2m_simple_mul bugfix: compute correct result if the output EC_POINT
1463 is also one of the inputs.
1464 [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
1466 *) Don't repeatedly append PBE algorithms to table if they already exist.
1467 Sort table on each new add. This effectively makes the table read only
1468 after all algorithms are added and subsequent calls to PKCS12_pbe_add
1472 Changes between 0.9.8n and 0.9.8o [01 Jun 2010]
1474 [NB: OpenSSL 0.9.8o and later 0.9.8 patch levels were released after
1477 *) Correct a typo in the CMS ASN1 module which can result in invalid memory
1478 access or freeing data twice (CVE-2010-0742)
1479 [Steve Henson, Ronald Moesbergen <intercommit@gmail.com>]
1481 *) Add SHA2 algorithms to SSL_library_init(). SHA2 is becoming far more
1482 common in certificates and some applications which only call
1483 SSL_library_init and not OpenSSL_add_all_algorithms() will fail.
1487 Reduce copying into .apps and .test in makevms.com
1488 Don't try to use blank CA certificate in CA.com
1489 Allow use of C files from original directories in maketests.com
1490 [Steven M. Schweda" <sms@antinode.info>]
1492 Changes between 0.9.8m and 0.9.8n [24 Mar 2010]
1494 *) When rejecting SSL/TLS records due to an incorrect version number, never
1495 update s->server with a new major version number. As of
1496 - OpenSSL 0.9.8m if 'short' is a 16-bit type,
1497 - OpenSSL 0.9.8f if 'short' is longer than 16 bits,
1498 the previous behavior could result in a read attempt at NULL when
1499 receiving specific incorrect SSL/TLS records once record payload
1500 protection is active. (CVE-2010-0740)
1501 [Bodo Moeller, Adam Langley <agl@chromium.org>]
1503 *) Fix for CVE-2010-0433 where some kerberos enabled versions of OpenSSL
1504 could be crashed if the relevant tables were not present (e.g. chrooted).
1505 [Tomas Hoger <thoger@redhat.com>]
1507 Changes between 0.9.8l and 0.9.8m [25 Feb 2010]
1509 *) Always check bn_wexpend() return values for failure. (CVE-2009-3245)
1510 [Martin Olsson, Neel Mehta]
1512 *) Fix X509_STORE locking: Every 'objs' access requires a lock (to
1513 accommodate for stack sorting, always a write lock!).
1516 *) On some versions of WIN32 Heap32Next is very slow. This can cause
1517 excessive delays in the RAND_poll(): over a minute. As a workaround
1518 include a time check in the inner Heap32Next loop too.
1521 *) The code that handled flushing of data in SSL/TLS originally used the
1522 BIO_CTRL_INFO ctrl to see if any data was pending first. This caused
1523 the problem outlined in PR#1949. The fix suggested there however can
1524 trigger problems with buggy BIO_CTRL_WPENDING (e.g. some versions
1525 of Apache). So instead simplify the code to flush unconditionally.
1526 This should be fine since flushing with no data to flush is a no op.
1529 *) Handle TLS versions 2.0 and later properly and correctly use the
1530 highest version of TLS/SSL supported. Although TLS >= 2.0 is some way
1531 off ancient servers have a habit of sticking around for a while...
1534 *) Modify compression code so it frees up structures without using the
1535 ex_data callbacks. This works around a problem where some applications
1536 call CRYPTO_cleanup_all_ex_data() before application exit (e.g. when
1537 restarting) then use compression (e.g. SSL with compression) later.
1538 This results in significant per-connection memory leaks and
1539 has caused some security issues including CVE-2008-1678 and
1543 *) Constify crypto/cast (i.e., <openssl/cast.h>): a CAST_KEY doesn't
1544 change when encrypting or decrypting.
1547 *) Add option SSL_OP_LEGACY_SERVER_CONNECT which will allow clients to
1548 connect and renegotiate with servers which do not support RI.
1549 Until RI is more widely deployed this option is enabled by default.
1552 *) Add "missing" ssl ctrls to clear options and mode.
1555 *) If client attempts to renegotiate and doesn't support RI respond with
1556 a no_renegotiation alert as required by RFC5746. Some renegotiating
1557 TLS clients will continue a connection gracefully when they receive
1558 the alert. Unfortunately OpenSSL mishandled this alert and would hang
1559 waiting for a server hello which it will never receive. Now we treat a
1560 received no_renegotiation alert as a fatal error. This is because
1561 applications requesting a renegotiation might well expect it to succeed
1562 and would have no code in place to handle the server denying it so the
1563 only safe thing to do is to terminate the connection.
1566 *) Add ctrl macro SSL_get_secure_renegotiation_support() which returns 1 if
1567 peer supports secure renegotiation and 0 otherwise. Print out peer
1568 renegotiation support in s_client/s_server.
1571 *) Replace the highly broken and deprecated SPKAC certification method with
1572 the updated NID creation version. This should correctly handle UTF8.
1575 *) Implement RFC5746. Re-enable renegotiation but require the extension
1576 as needed. Unfortunately, SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION
1577 turns out to be a bad idea. It has been replaced by
1578 SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION which can be set with
1579 SSL_CTX_set_options(). This is really not recommended unless you
1580 know what you are doing.
1581 [Eric Rescorla <ekr@networkresonance.com>, Ben Laurie, Steve Henson]
1583 *) Fixes to stateless session resumption handling. Use initial_ctx when
1584 issuing and attempting to decrypt tickets in case it has changed during
1585 servername handling. Use a non-zero length session ID when attempting
1586 stateless session resumption: this makes it possible to determine if
1587 a resumption has occurred immediately after receiving server hello
1588 (several places in OpenSSL subtly assume this) instead of later in
1592 *) The functions ENGINE_ctrl(), OPENSSL_isservice(),
1593 CMS_get1_RecipientRequest() and RAND_bytes() can return <=0 on error
1594 fixes for a few places where the return code is not checked
1596 [Julia Lawall <julia@diku.dk>]
1598 *) Add --strict-warnings option to Configure script to include devteam
1599 warnings in other configurations.
1602 *) Add support for --libdir option and LIBDIR variable in makefiles. This
1603 makes it possible to install openssl libraries in locations which
1604 have names other than "lib", for example "/usr/lib64" which some
1606 [Steve Henson, based on patch from Jeremy Utley]
1608 *) Don't allow the use of leading 0x80 in OIDs. This is a violation of
1609 X690 8.9.12 and can produce some misleading textual output of OIDs.
1610 [Steve Henson, reported by Dan Kaminsky]
1612 *) Delete MD2 from algorithm tables. This follows the recommendation in
1613 several standards that it is not used in new applications due to
1614 several cryptographic weaknesses. For binary compatibility reasons
1615 the MD2 API is still compiled in by default.
1618 *) Add compression id to {d2i,i2d}_SSL_SESSION so it is correctly saved
1622 *) Rename uni2asc and asc2uni functions to OPENSSL_uni2asc and
1623 OPENSSL_asc2uni conditionally on Netware platforms to avoid a name
1625 [Guenter <lists@gknw.net>]
1627 *) Fix the server certificate chain building code to use X509_verify_cert(),
1628 it used to have an ad-hoc builder which was unable to cope with anything
1629 other than a simple chain.
1630 [David Woodhouse <dwmw2@infradead.org>, Steve Henson]
1632 *) Don't check self signed certificate signatures in X509_verify_cert()
1633 by default (a flag can override this): it just wastes time without
1634 adding any security. As a useful side effect self signed root CAs
1635 with non-FIPS digests are now usable in FIPS mode.
1638 *) In dtls1_process_out_of_seq_message() the check if the current message
1639 is already buffered was missing. For every new message was memory
1640 allocated, allowing an attacker to perform an denial of service attack
1641 with sending out of seq handshake messages until there is no memory
1642 left. Additionally every future messege was buffered, even if the
1643 sequence number made no sense and would be part of another handshake.
1644 So only messages with sequence numbers less than 10 in advance will be
1645 buffered. (CVE-2009-1378)
1646 [Robin Seggelmann, discovered by Daniel Mentz]
1648 *) Records are buffered if they arrive with a future epoch to be
1649 processed after finishing the corresponding handshake. There is
1650 currently no limitation to this buffer allowing an attacker to perform
1651 a DOS attack with sending records with future epochs until there is no
1652 memory left. This patch adds the pqueue_size() function to detemine
1653 the size of a buffer and limits the record buffer to 100 entries.
1655 [Robin Seggelmann, discovered by Daniel Mentz]
1657 *) Keep a copy of frag->msg_header.frag_len so it can be used after the
1658 parent structure is freed. (CVE-2009-1379)
1661 *) Handle non-blocking I/O properly in SSL_shutdown() call.
1662 [Darryl Miles <darryl-mailinglists@netbauds.net>]
1665 [Ilya O. <vrghost@gmail.com>]
1667 Changes between 0.9.8k and 0.9.8l [5 Nov 2009]
1669 *) Disable renegotiation completely - this fixes a severe security
1670 problem (CVE-2009-3555) at the cost of breaking all
1671 renegotiation. Renegotiation can be re-enabled by setting
1672 SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION in s3->flags at
1673 run-time. This is really not recommended unless you know what
1677 Changes between 0.9.8j and 0.9.8k [25 Mar 2009]
1679 *) Don't set val to NULL when freeing up structures, it is freed up by
1680 underlying code. If sizeof(void *) > sizeof(long) this can result in
1681 zeroing past the valid field. (CVE-2009-0789)
1682 [Paolo Ganci <Paolo.Ganci@AdNovum.CH>]
1684 *) Fix bug where return value of CMS_SignerInfo_verify_content() was not
1685 checked correctly. This would allow some invalid signed attributes to
1686 appear to verify correctly. (CVE-2009-0591)
1687 [Ivan Nestlerode <inestlerode@us.ibm.com>]
1689 *) Reject UniversalString and BMPString types with invalid lengths. This
1690 prevents a crash in ASN1_STRING_print_ex() which assumes the strings have
1691 a legal length. (CVE-2009-0590)
1694 *) Set S/MIME signing as the default purpose rather than setting it
1695 unconditionally. This allows applications to override it at the store
1699 *) Permit restricted recursion of ASN1 strings. This is needed in practice
1700 to handle some structures.
1703 *) Improve efficiency of mem_gets: don't search whole buffer each time
1705 [Jeremy Shapiro <jnshapir@us.ibm.com>]
1707 *) New -hex option for openssl rand.
1710 *) Print out UTF8String and NumericString when parsing ASN1.
1713 *) Support NumericString type for name components.
1716 *) Allow CC in the environment to override the automatically chosen
1717 compiler. Note that nothing is done to ensure flags work with the
1721 Changes between 0.9.8i and 0.9.8j [07 Jan 2009]
1723 *) Properly check EVP_VerifyFinal() and similar return values
1725 [Ben Laurie, Bodo Moeller, Google Security Team]
1727 *) Enable TLS extensions by default.
1730 *) Allow the CHIL engine to be loaded, whether the application is
1731 multithreaded or not. (This does not release the developer from the
1732 obligation to set up the dynamic locking callbacks.)
1733 [Sander Temme <sander@temme.net>]
1735 *) Use correct exit code if there is an error in dgst command.
1736 [Steve Henson; problem pointed out by Roland Dirlewanger]
1738 *) Tweak Configure so that you need to say "experimental-jpake" to enable
1739 JPAKE, and need to use -DOPENSSL_EXPERIMENTAL_JPAKE in applications.
1742 *) Add experimental JPAKE support, including demo authentication in
1743 s_client and s_server.
1746 *) Set the comparison function in v3_addr_canonize().
1747 [Rob Austein <sra@hactrn.net>]
1749 *) Add support for XMPP STARTTLS in s_client.
1750 [Philip Paeps <philip@freebsd.org>]
1752 *) Change the server-side SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG behavior
1753 to ensure that even with this option, only ciphersuites in the
1754 server's preference list will be accepted. (Note that the option
1755 applies only when resuming a session, so the earlier behavior was
1756 just about the algorithm choice for symmetric cryptography.)
1759 Changes between 0.9.8h and 0.9.8i [15 Sep 2008]
1761 *) Fix NULL pointer dereference if a DTLS server received
1762 ChangeCipherSpec as first record (CVE-2009-1386).
1765 *) Fix a state transitition in s3_srvr.c and d1_srvr.c
1766 (was using SSL3_ST_CW_CLNT_HELLO_B, should be ..._ST_SW_SRVR_...).
1769 *) The fix in 0.9.8c that supposedly got rid of unsafe
1770 double-checked locking was incomplete for RSA blinding,
1771 addressing just one layer of what turns out to have been
1772 doubly unsafe triple-checked locking.
1774 So now fix this for real by retiring the MONT_HELPER macro
1775 in crypto/rsa/rsa_eay.c.
1777 [Bodo Moeller; problem pointed out by Marius Schilder]
1779 *) Various precautionary measures:
1781 - Avoid size_t integer overflow in HASH_UPDATE (md32_common.h).
1783 - Avoid a buffer overflow in d2i_SSL_SESSION() (ssl_asn1.c).
1784 (NB: This would require knowledge of the secret session ticket key
1785 to exploit, in which case you'd be SOL either way.)
1787 - Change bn_nist.c so that it will properly handle input BIGNUMs
1788 outside the expected range.
1790 - Enforce the 'num' check in BN_div() (bn_div.c) for non-BN_DEBUG
1793 [Neel Mehta, Bodo Moeller]
1795 *) Allow engines to be "soft loaded" - i.e. optionally don't die if
1796 the load fails. Useful for distros.
1797 [Ben Laurie and the FreeBSD team]
1799 *) Add support for Local Machine Keyset attribute in PKCS#12 files.
1802 *) Fix BN_GF2m_mod_arr() top-bit cleanup code.
1805 *) Expand ENGINE to support engine supplied SSL client certificate functions.
1807 This work was sponsored by Logica.
1810 *) Add CryptoAPI ENGINE to support use of RSA and DSA keys held in Windows
1811 keystores. Support for SSL/TLS client authentication too.
1812 Not compiled unless enable-capieng specified to Configure.
1814 This work was sponsored by Logica.
1817 *) Fix bug in X509_ATTRIBUTE creation: dont set attribute using
1818 ASN1_TYPE_set1 if MBSTRING flag set. This bug would crash certain
1819 attribute creation routines such as certifcate requests and PKCS#12
1823 Changes between 0.9.8g and 0.9.8h [28 May 2008]
1825 *) Fix flaw if 'Server Key exchange message' is omitted from a TLS
1826 handshake which could lead to a cilent crash as found using the
1827 Codenomicon TLS test suite (CVE-2008-1672)
1828 [Steve Henson, Mark Cox]
1830 *) Fix double free in TLS server name extensions which could lead to
1831 a remote crash found by Codenomicon TLS test suite (CVE-2008-0891)
1834 *) Clear error queue in SSL_CTX_use_certificate_chain_file()
1836 Clear the error queue to ensure that error entries left from
1837 older function calls do not interfere with the correct operation.
1838 [Lutz Jaenicke, Erik de Castro Lopo]
1840 *) Remove root CA certificates of commercial CAs:
1842 The OpenSSL project does not recommend any specific CA and does not
1843 have any policy with respect to including or excluding any CA.
1844 Therefore it does not make any sense to ship an arbitrary selection
1845 of root CA certificates with the OpenSSL software.
1848 *) RSA OAEP patches to fix two separate invalid memory reads.
1849 The first one involves inputs when 'lzero' is greater than
1850 'SHA_DIGEST_LENGTH' (it would read about SHA_DIGEST_LENGTH bytes
1851 before the beginning of from). The second one involves inputs where
1852 the 'db' section contains nothing but zeroes (there is a one-byte
1853 invalid read after the end of 'db').
1854 [Ivan Nestlerode <inestlerode@us.ibm.com>]
1856 *) Partial backport from 0.9.9-dev:
1858 Introduce bn_mul_mont (dedicated Montgomery multiplication
1859 procedure) as a candidate for BIGNUM assembler implementation.
1860 While 0.9.9-dev uses assembler for various architectures, only
1861 x86_64 is available by default here in the 0.9.8 branch, and
1862 32-bit x86 is available through a compile-time setting.
1864 To try the 32-bit x86 assembler implementation, use Configure
1865 option "enable-montasm" (which exists only for this backport).
1867 As "enable-montasm" for 32-bit x86 disclaims code stability
1868 anyway, in this constellation we activate additional code
1869 backported from 0.9.9-dev for further performance improvements,
1870 namely BN_from_montgomery_word. (To enable this otherwise,
1871 e.g. x86_64, try "-DMONT_FROM_WORD___NON_DEFAULT_0_9_8_BUILD".)
1873 [Andy Polyakov (backport partially by Bodo Moeller)]
1875 *) Add TLS session ticket callback. This allows an application to set
1876 TLS ticket cipher and HMAC keys rather than relying on hardcoded fixed
1877 values. This is useful for key rollover for example where several key
1878 sets may exist with different names.
1881 *) Reverse ENGINE-internal logic for caching default ENGINE handles.
1882 This was broken until now in 0.9.8 releases, such that the only way
1883 a registered ENGINE could be used (assuming it initialises
1884 successfully on the host) was to explicitly set it as the default
1885 for the relevant algorithms. This is in contradiction with 0.9.7
1886 behaviour and the documentation. With this fix, when an ENGINE is
1887 registered into a given algorithm's table of implementations, the
1888 'uptodate' flag is reset so that auto-discovery will be used next
1889 time a new context for that algorithm attempts to select an
1891 [Ian Lister (tweaked by Geoff Thorpe)]
1893 *) Backport of CMS code to OpenSSL 0.9.8. This differs from the 0.9.9
1894 implemention in the following ways:
1896 Lack of EVP_PKEY_ASN1_METHOD means algorithm parameters have to be
1899 Lack of BER streaming support means one pass streaming processing is
1900 only supported if data is detached: setting the streaming flag is
1901 ignored for embedded content.
1903 CMS support is disabled by default and must be explicitly enabled
1904 with the enable-cms configuration option.
1907 *) Update the GMP engine glue to do direct copies between BIGNUM and
1908 mpz_t when openssl and GMP use the same limb size. Otherwise the
1909 existing "conversion via a text string export" trick is still used.
1910 [Paul Sheer <paulsheer@gmail.com>]
1912 *) Zlib compression BIO. This is a filter BIO which compressed and
1913 uncompresses any data passed through it.
1916 *) Add AES_wrap_key() and AES_unwrap_key() functions to implement
1917 RFC3394 compatible AES key wrapping.
1920 *) Add utility functions to handle ASN1 structures. ASN1_STRING_set0():
1921 sets string data without copying. X509_ALGOR_set0() and
1922 X509_ALGOR_get0(): set and retrieve X509_ALGOR (AlgorithmIdentifier)
1923 data. Attribute function X509at_get0_data_by_OBJ(): retrieves data
1924 from an X509_ATTRIBUTE structure optionally checking it occurs only
1925 once. ASN1_TYPE_set1(): set and ASN1_TYPE structure copying supplied
1929 *) Fix BN flag handling in RSA_eay_mod_exp() and BN_MONT_CTX_set()
1930 to get the expected BN_FLG_CONSTTIME behavior.
1931 [Bodo Moeller (Google)]
1935 - fixed wrong usage of ioctlsocket() when build for LIBC BSD sockets
1936 - fixed do_tests.pl to run the test suite with CLIB builds too (CLIB_OPT)
1937 - added some more tests to do_tests.pl
1938 - fixed RunningProcess usage so that it works with newer LIBC NDKs too
1939 - removed usage of BN_LLONG for CLIB builds to avoid runtime dependency
1940 - added new Configure targets netware-clib-bsdsock, netware-clib-gcc,
1941 netware-clib-bsdsock-gcc, netware-libc-bsdsock-gcc
1942 - various changes to netware.pl to enable gcc-cross builds on Win32
1944 - changed crypto/bio/b_sock.c to work with macro functions (CLIB BSD)
1945 - various changes to fix missing prototype warnings
1946 - fixed x86nasm.pl to create correct asm files for NASM COFF output
1947 - added AES, WHIRLPOOL and CPUID assembler code to build files
1948 - added missing AES assembler make rules to mk1mf.pl
1949 - fixed order of includes in apps/ocsp.c so that e_os.h settings apply
1950 [Guenter Knauf <eflash@gmx.net>]
1952 *) Implement certificate status request TLS extension defined in RFC3546.
1953 A client can set the appropriate parameters and receive the encoded
1954 OCSP response via a callback. A server can query the supplied parameters
1955 and set the encoded OCSP response in the callback. Add simplified examples
1956 to s_client and s_server.
1959 Changes between 0.9.8f and 0.9.8g [19 Oct 2007]
1961 *) Fix various bugs:
1962 + Binary incompatibility of ssl_ctx_st structure
1963 + DTLS interoperation with non-compliant servers
1964 + Don't call get_session_cb() without proposed session
1965 + Fix ia64 assembler code
1966 [Andy Polyakov, Steve Henson]
1968 Changes between 0.9.8e and 0.9.8f [11 Oct 2007]
1970 *) DTLS Handshake overhaul. There were longstanding issues with
1971 OpenSSL DTLS implementation, which were making it impossible for
1972 RFC 4347 compliant client to communicate with OpenSSL server.
1973 Unfortunately just fixing these incompatibilities would "cut off"
1974 pre-0.9.8f clients. To allow for hassle free upgrade post-0.9.8e
1975 server keeps tolerating non RFC compliant syntax. The opposite is
1976 not true, 0.9.8f client can not communicate with earlier server.
1977 This update even addresses CVE-2007-4995.
1980 *) Changes to avoid need for function casts in OpenSSL: some compilers
1981 (gcc 4.2 and later) reject their use.
1982 [Kurt Roeckx <kurt@roeckx.be>, Peter Hartley <pdh@utter.chaos.org.uk>,
1985 *) Add RFC4507 support to OpenSSL. This includes the corrections in
1986 RFC4507bis. The encrypted ticket format is an encrypted encoded
1987 SSL_SESSION structure, that way new session features are automatically
1990 If a client application caches session in an SSL_SESSION structure
1991 support is transparent because tickets are now stored in the encoded
1994 The SSL_CTX structure automatically generates keys for ticket
1995 protection in servers so again support should be possible
1996 with no application modification.
1998 If a client or server wishes to disable RFC4507 support then the option
1999 SSL_OP_NO_TICKET can be set.
2001 Add a TLS extension debugging callback to allow the contents of any client
2002 or server extensions to be examined.
2004 This work was sponsored by Google.
2007 *) Add initial support for TLS extensions, specifically for the server_name
2008 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
2009 have new members for a host name. The SSL data structure has an
2010 additional member SSL_CTX *initial_ctx so that new sessions can be
2011 stored in that context to allow for session resumption, even after the
2012 SSL has been switched to a new SSL_CTX in reaction to a client's
2013 server_name extension.
2015 New functions (subject to change):
2017 SSL_get_servername()
2018 SSL_get_servername_type()
2021 New CTRL codes and macros (subject to change):
2023 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
2024 - SSL_CTX_set_tlsext_servername_callback()
2025 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
2026 - SSL_CTX_set_tlsext_servername_arg()
2027 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
2029 openssl s_client has a new '-servername ...' option.
2031 openssl s_server has new options '-servername_host ...', '-cert2 ...',
2032 '-key2 ...', '-servername_fatal' (subject to change). This allows
2033 testing the HostName extension for a specific single host name ('-cert'
2034 and '-key' remain fallbacks for handshakes without HostName
2035 negotiation). If the unrecogninzed_name alert has to be sent, this by
2036 default is a warning; it becomes fatal with the '-servername_fatal'
2039 [Peter Sylvester, Remy Allais, Christophe Renou, Steve Henson]
2041 *) Add AES and SSE2 assembly language support to VC++ build.
2044 *) Mitigate attack on final subtraction in Montgomery reduction.
2047 *) Fix crypto/ec/ec_mult.c to work properly with scalars of value 0
2048 (which previously caused an internal error).
2051 *) Squeeze another 10% out of IGE mode when in != out.
2054 *) AES IGE mode speedup.
2055 [Dean Gaudet (Google)]
2057 *) Add the Korean symmetric 128-bit cipher SEED (see
2058 http://www.kisa.or.kr/kisa/seed/jsp/seed_eng.jsp) and
2059 add SEED ciphersuites from RFC 4162:
2061 TLS_RSA_WITH_SEED_CBC_SHA = "SEED-SHA"
2062 TLS_DHE_DSS_WITH_SEED_CBC_SHA = "DHE-DSS-SEED-SHA"
2063 TLS_DHE_RSA_WITH_SEED_CBC_SHA = "DHE-RSA-SEED-SHA"
2064 TLS_DH_anon_WITH_SEED_CBC_SHA = "ADH-SEED-SHA"
2066 To minimize changes between patchlevels in the OpenSSL 0.9.8
2067 series, SEED remains excluded from compilation unless OpenSSL
2068 is configured with 'enable-seed'.
2069 [KISA, Bodo Moeller]
2071 *) Mitigate branch prediction attacks, which can be practical if a
2072 single processor is shared, allowing a spy process to extract
2073 information. For detailed background information, see
2074 http://eprint.iacr.org/2007/039 (O. Aciicmez, S. Gueron,
2075 J.-P. Seifert, "New Branch Prediction Vulnerabilities in OpenSSL
2076 and Necessary Software Countermeasures"). The core of the change
2077 are new versions BN_div_no_branch() and
2078 BN_mod_inverse_no_branch() of BN_div() and BN_mod_inverse(),
2079 respectively, which are slower, but avoid the security-relevant
2080 conditional branches. These are automatically called by BN_div()
2081 and BN_mod_inverse() if the flag BN_FLG_CONSTTIME is set for one
2082 of the input BIGNUMs. Also, BN_is_bit_set() has been changed to
2083 remove a conditional branch.
2085 BN_FLG_CONSTTIME is the new name for the previous
2086 BN_FLG_EXP_CONSTTIME flag, since it now affects more than just
2087 modular exponentiation. (Since OpenSSL 0.9.7h, setting this flag
2088 in the exponent causes BN_mod_exp_mont() to use the alternative
2089 implementation in BN_mod_exp_mont_consttime().) The old name
2090 remains as a deprecated alias.
2092 Similary, RSA_FLAG_NO_EXP_CONSTTIME is replaced by a more general
2093 RSA_FLAG_NO_CONSTTIME flag since the RSA implementation now uses
2094 constant-time implementations for more than just exponentiation.
2095 Here too the old name is kept as a deprecated alias.
2097 BN_BLINDING_new() will now use BN_dup() for the modulus so that
2098 the BN_BLINDING structure gets an independent copy of the
2099 modulus. This means that the previous "BIGNUM *m" argument to
2100 BN_BLINDING_new() and to BN_BLINDING_create_param() now
2101 essentially becomes "const BIGNUM *m", although we can't actually
2102 change this in the header file before 0.9.9. It allows
2103 RSA_setup_blinding() to use BN_with_flags() on the modulus to
2104 enable BN_FLG_CONSTTIME.
2106 [Matthew D Wood (Intel Corp)]
2108 *) In the SSL/TLS server implementation, be strict about session ID
2109 context matching (which matters if an application uses a single
2110 external cache for different purposes). Previously,
2111 out-of-context reuse was forbidden only if SSL_VERIFY_PEER was
2112 set. This did ensure strict client verification, but meant that,
2113 with applications using a single external cache for quite
2114 different requirements, clients could circumvent ciphersuite
2115 restrictions for a given session ID context by starting a session
2116 in a different context.
2119 *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
2120 a ciphersuite string such as "DEFAULT:RSA" cannot enable
2121 authentication-only ciphersuites.
2124 *) Update the SSL_get_shared_ciphers() fix CVE-2006-3738 which was
2125 not complete and could lead to a possible single byte overflow
2126 (CVE-2007-5135) [Ben Laurie]
2128 Changes between 0.9.8d and 0.9.8e [23 Feb 2007]
2130 *) Since AES128 and AES256 (and similarly Camellia128 and
2131 Camellia256) share a single mask bit in the logic of
2132 ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
2133 kludge to work properly if AES128 is available and AES256 isn't
2134 (or if Camellia128 is available and Camellia256 isn't).
2137 *) Fix the BIT STRING encoding generated by crypto/ec/ec_asn1.c
2138 (within i2d_ECPrivateKey, i2d_ECPKParameters, i2d_ECParameters):
2139 When a point or a seed is encoded in a BIT STRING, we need to
2140 prevent the removal of trailing zero bits to get the proper DER
2141 encoding. (By default, crypto/asn1/a_bitstr.c assumes the case
2142 of a NamedBitList, for which trailing 0 bits need to be removed.)
2145 *) Have SSL/TLS server implementation tolerate "mismatched" record
2146 protocol version while receiving ClientHello even if the
2147 ClientHello is fragmented. (The server can't insist on the
2148 particular protocol version it has chosen before the ServerHello
2149 message has informed the client about his choice.)
2152 *) Add RFC 3779 support.
2153 [Rob Austein for ARIN, Ben Laurie]
2155 *) Load error codes if they are not already present instead of using a
2156 static variable. This allows them to be cleanly unloaded and reloaded.
2157 Improve header file function name parsing.
2160 *) extend SMTP and IMAP protocol emulation in s_client to use EHLO
2161 or CAPABILITY handshake as required by RFCs.
2164 Changes between 0.9.8c and 0.9.8d [28 Sep 2006]
2166 *) Introduce limits to prevent malicious keys being able to
2167 cause a denial of service. (CVE-2006-2940)
2168 [Steve Henson, Bodo Moeller]
2170 *) Fix ASN.1 parsing of certain invalid structures that can result
2171 in a denial of service. (CVE-2006-2937) [Steve Henson]
2173 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
2174 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
2176 *) Fix SSL client code which could crash if connecting to a
2177 malicious SSLv2 server. (CVE-2006-4343)
2178 [Tavis Ormandy and Will Drewry, Google Security Team]
2180 *) Since 0.9.8b, ciphersuite strings naming explicit ciphersuites
2181 match only those. Before that, "AES256-SHA" would be interpreted
2182 as a pattern and match "AES128-SHA" too (since AES128-SHA got
2183 the same strength classification in 0.9.7h) as we currently only
2184 have a single AES bit in the ciphersuite description bitmap.
2185 That change, however, also applied to ciphersuite strings such as
2186 "RC4-MD5" that intentionally matched multiple ciphersuites --
2187 namely, SSL 2.0 ciphersuites in addition to the more common ones
2188 from SSL 3.0/TLS 1.0.
2190 So we change the selection algorithm again: Naming an explicit
2191 ciphersuite selects this one ciphersuite, and any other similar
2192 ciphersuite (same bitmap) from *other* protocol versions.
2193 Thus, "RC4-MD5" again will properly select both the SSL 2.0
2194 ciphersuite and the SSL 3.0/TLS 1.0 ciphersuite.
2196 Since SSL 2.0 does not have any ciphersuites for which the
2197 128/256 bit distinction would be relevant, this works for now.
2198 The proper fix will be to use different bits for AES128 and
2199 AES256, which would have avoided the problems from the beginning;
2200 however, bits are scarce, so we can only do this in a new release
2201 (not just a patchlevel) when we can change the SSL_CIPHER
2202 definition to split the single 'unsigned long mask' bitmap into
2203 multiple values to extend the available space.
2207 Changes between 0.9.8b and 0.9.8c [05 Sep 2006]
2209 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
2210 (CVE-2006-4339) [Ben Laurie and Google Security Team]
2212 *) Add AES IGE and biIGE modes.
2215 *) Change the Unix randomness entropy gathering to use poll() when
2216 possible instead of select(), since the latter has some
2217 undesirable limitations.
2218 [Darryl Miles via Richard Levitte and Bodo Moeller]
2220 *) Disable "ECCdraft" ciphersuites more thoroughly. Now special
2221 treatment in ssl/ssl_ciph.s makes sure that these ciphersuites
2222 cannot be implicitly activated as part of, e.g., the "AES" alias.
2223 However, please upgrade to OpenSSL 0.9.9[-dev] for
2224 non-experimental use of the ECC ciphersuites to get TLS extension
2225 support, which is required for curve and point format negotiation
2226 to avoid potential handshake problems.
2229 *) Disable rogue ciphersuites:
2231 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
2232 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
2233 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
2235 The latter two were purportedly from
2236 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
2239 Also deactivate the remaining ciphersuites from
2240 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
2241 unofficial, and the ID has long expired.
2244 *) Fix RSA blinding Heisenbug (problems sometimes occured on
2245 dual-core machines) and other potential thread-safety issues.
2248 *) Add the symmetric cipher Camellia (128-bit, 192-bit, 256-bit key
2249 versions), which is now available for royalty-free use
2250 (see http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html).
2251 Also, add Camellia TLS ciphersuites from RFC 4132.
2253 To minimize changes between patchlevels in the OpenSSL 0.9.8
2254 series, Camellia remains excluded from compilation unless OpenSSL
2255 is configured with 'enable-camellia'.
2258 *) Disable the padding bug check when compression is in use. The padding
2259 bug check assumes the first packet is of even length, this is not
2260 necessarily true if compresssion is enabled and can result in false
2261 positives causing handshake failure. The actual bug test is ancient
2262 code so it is hoped that implementations will either have fixed it by
2263 now or any which still have the bug do not support compression.
2266 Changes between 0.9.8a and 0.9.8b [04 May 2006]
2268 *) When applying a cipher rule check to see if string match is an explicit
2269 cipher suite and only match that one cipher suite if it is.
2272 *) Link in manifests for VC++ if needed.
2273 [Austin Ziegler <halostatue@gmail.com>]
2275 *) Update support for ECC-based TLS ciphersuites according to
2276 draft-ietf-tls-ecc-12.txt with proposed changes (but without
2277 TLS extensions, which are supported starting with the 0.9.9
2278 branch, not in the OpenSSL 0.9.8 branch).
2281 *) New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free() to support
2282 opaque EVP_CIPHER_CTX handling.
2285 *) Fixes and enhancements to zlib compression code. We now only use
2286 "zlib1.dll" and use the default __cdecl calling convention on Win32
2287 to conform with the standards mentioned here:
2288 http://www.zlib.net/DLL_FAQ.txt
2289 Static zlib linking now works on Windows and the new --with-zlib-include
2290 --with-zlib-lib options to Configure can be used to supply the location
2291 of the headers and library. Gracefully handle case where zlib library
2295 *) Several fixes and enhancements to the OID generation code. The old code
2296 sometimes allowed invalid OIDs (1.X for X >= 40 for example), couldn't
2297 handle numbers larger than ULONG_MAX, truncated printing and had a
2298 non standard OBJ_obj2txt() behaviour.
2301 *) Add support for building of engines under engine/ as shared libraries
2302 under VC++ build system.
2305 *) Corrected the numerous bugs in the Win32 path splitter in DSO.
2306 Hopefully, we will not see any false combination of paths any more.
2309 Changes between 0.9.8 and 0.9.8a [11 Oct 2005]
2311 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
2312 (part of SSL_OP_ALL). This option used to disable the
2313 countermeasure against man-in-the-middle protocol-version
2314 rollback in the SSL 2.0 server implementation, which is a bad
2315 idea. (CVE-2005-2969)
2317 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
2318 for Information Security, National Institute of Advanced Industrial
2319 Science and Technology [AIST], Japan)]
2321 *) Add two function to clear and return the verify parameter flags.
2324 *) Keep cipherlists sorted in the source instead of sorting them at
2325 runtime, thus removing the need for a lock.
2328 *) Avoid some small subgroup attacks in Diffie-Hellman.
2329 [Nick Mathewson and Ben Laurie]
2331 *) Add functions for well-known primes.
2334 *) Extended Windows CE support.
2335 [Satoshi Nakamura and Andy Polyakov]
2337 *) Initialize SSL_METHOD structures at compile time instead of during
2338 runtime, thus removing the need for a lock.
2341 *) Make PKCS7_decrypt() work even if no certificate is supplied by
2342 attempting to decrypt each encrypted key in turn. Add support to
2346 Changes between 0.9.7h and 0.9.8 [05 Jul 2005]
2348 [NB: OpenSSL 0.9.7i and later 0.9.7 patch levels were released after
2351 *) Add libcrypto.pc and libssl.pc for those who feel they need them.
2354 *) Change CA.sh and CA.pl so they don't bundle the CSR and the private
2355 key into the same file any more.
2358 *) Add initial support for Win64, both IA64 and AMD64/x64 flavors.
2361 *) Add -utf8 command line and config file option to 'ca'.
2362 [Stefan <stf@udoma.org]
2364 *) Removed the macro des_crypt(), as it seems to conflict with some
2365 libraries. Use DES_crypt().
2368 *) Correct naming of the 'chil' and '4758cca' ENGINEs. This
2369 involves renaming the source and generated shared-libs for
2370 both. The engines will accept the corrected or legacy ids
2371 ('ncipher' and '4758_cca' respectively) when binding. NB,
2372 this only applies when building 'shared'.
2373 [Corinna Vinschen <vinschen@redhat.com> and Geoff Thorpe]
2375 *) Add attribute functions to EVP_PKEY structure. Modify
2376 PKCS12_create() to recognize a CSP name attribute and
2377 use it. Make -CSP option work again in pkcs12 utility.
2380 *) Add new functionality to the bn blinding code:
2381 - automatic re-creation of the BN_BLINDING parameters after
2382 a fixed number of uses (currently 32)
2383 - add new function for parameter creation
2384 - introduce flags to control the update behaviour of the
2385 BN_BLINDING parameters
2386 - hide BN_BLINDING structure
2387 Add a second BN_BLINDING slot to the RSA structure to improve
2388 performance when a single RSA object is shared among several
2392 *) Add support for DTLS.
2393 [Nagendra Modadugu <nagendra@cs.stanford.edu> and Ben Laurie]
2395 *) Add support for DER encoded private keys (SSL_FILETYPE_ASN1)
2396 to SSL_CTX_use_PrivateKey_file() and SSL_use_PrivateKey_file()
2399 *) Remove buggy and incompletet DH cert support from
2400 ssl/ssl_rsa.c and ssl/s3_both.c
2403 *) Use SHA-1 instead of MD5 as the default digest algorithm for
2404 the apps/openssl applications.
2407 *) Compile clean with "-Wall -Wmissing-prototypes
2408 -Wstrict-prototypes -Wmissing-declarations -Werror". Currently
2409 DEBUG_SAFESTACK must also be set.
2412 *) Change ./Configure so that certain algorithms can be disabled by default.
2413 The new counterpiece to "no-xxx" is "enable-xxx".
2415 The patented RC5 and MDC2 algorithms will now be disabled unless
2416 "enable-rc5" and "enable-mdc2", respectively, are specified.
2418 (IDEA remains enabled despite being patented. This is because IDEA
2419 is frequently required for interoperability, and there is no license
2420 fee for non-commercial use. As before, "no-idea" can be used to
2421 avoid this algorithm.)
2425 *) Add processing of proxy certificates (see RFC 3820). This work was
2426 sponsored by KTH (The Royal Institute of Technology in Stockholm) and
2427 EGEE (Enabling Grids for E-science in Europe).
2430 *) RC4 performance overhaul on modern architectures/implementations, such
2431 as Intel P4, IA-64 and AMD64.
2434 *) New utility extract-section.pl. This can be used specify an alternative
2435 section number in a pod file instead of having to treat each file as
2436 a separate case in Makefile. This can be done by adding two lines to the
2439 =for comment openssl_section:XXX
2441 The blank line is mandatory.
2445 *) New arguments -certform, -keyform and -pass for s_client and s_server
2446 to allow alternative format key and certificate files and passphrase
2450 *) New structure X509_VERIFY_PARAM which combines current verify parameters,
2451 update associated structures and add various utility functions.
2453 Add new policy related verify parameters, include policy checking in
2454 standard verify code. Enhance 'smime' application with extra parameters
2455 to support policy checking and print out.
2458 *) Add a new engine to support VIA PadLock ACE extensions in the VIA C3
2459 Nehemiah processors. These extensions support AES encryption in hardware
2460 as well as RNG (though RNG support is currently disabled).
2461 [Michal Ludvig <michal@logix.cz>, with help from Andy Polyakov]
2463 *) Deprecate BN_[get|set]_params() functions (they were ignored internally).
2466 *) New FIPS 180-2 algorithms, SHA-224/-256/-384/-512 are implemented.
2467 [Andy Polyakov and a number of other people]
2469 *) Improved PowerPC platform support. Most notably BIGNUM assembler
2470 implementation contributed by IBM.
2471 [Suresh Chari, Peter Waltenberg, Andy Polyakov]
2473 *) The new 'RSA_generate_key_ex' function now takes a BIGNUM for the public
2474 exponent rather than 'unsigned long'. There is a corresponding change to
2475 the new 'rsa_keygen' element of the RSA_METHOD structure.
2476 [Jelte Jansen, Geoff Thorpe]
2478 *) Functionality for creating the initial serial number file is now
2479 moved from CA.pl to the 'ca' utility with a new option -create_serial.
2481 (Before OpenSSL 0.9.7e, CA.pl used to initialize the serial
2482 number file to 1, which is bound to cause problems. To avoid
2483 the problems while respecting compatibility between different 0.9.7
2484 patchlevels, 0.9.7e employed 'openssl x509 -next_serial' in
2485 CA.pl for serial number initialization. With the new release 0.9.8,
2486 we can fix the problem directly in the 'ca' utility.)
2489 *) Reduced header interdepencies by declaring more opaque objects in
2490 ossl_typ.h. As a consequence, including some headers (eg. engine.h) will
2491 give fewer recursive includes, which could break lazy source code - so
2492 this change is covered by the OPENSSL_NO_DEPRECATED symbol. As always,
2493 developers should define this symbol when building and using openssl to
2494 ensure they track the recommended behaviour, interfaces, [etc], but
2495 backwards-compatible behaviour prevails when this isn't defined.
2498 *) New function X509_POLICY_NODE_print() which prints out policy nodes.
2501 *) Add new EVP function EVP_CIPHER_CTX_rand_key and associated functionality.
2502 This will generate a random key of the appropriate length based on the
2503 cipher context. The EVP_CIPHER can provide its own random key generation
2504 routine to support keys of a specific form. This is used in the des and
2505 3des routines to generate a key of the correct parity. Update S/MIME
2506 code to use new functions and hence generate correct parity DES keys.
2507 Add EVP_CHECK_DES_KEY #define to return an error if the key is not
2508 valid (weak or incorrect parity).
2511 *) Add a local set of CRLs that can be used by X509_verify_cert() as well
2512 as looking them up. This is useful when the verified structure may contain
2513 CRLs, for example PKCS#7 signedData. Modify PKCS7_verify() to use any CRLs
2514 present unless the new PKCS7_NO_CRL flag is asserted.
2517 *) Extend ASN1 oid configuration module. It now additionally accepts the
2520 shortName = some long name, 1.2.3.4
2523 *) Reimplemented the BN_CTX implementation. There is now no more static
2524 limitation on the number of variables it can handle nor the depth of the
2525 "stack" handling for BN_CTX_start()/BN_CTX_end() pairs. The stack
2526 information can now expand as required, and rather than having a single
2527 static array of bignums, BN_CTX now uses a linked-list of such arrays
2528 allowing it to expand on demand whilst maintaining the usefulness of
2529 BN_CTX's "bundling".
2532 *) Add a missing BN_CTX parameter to the 'rsa_mod_exp' callback in RSA_METHOD
2533 to allow all RSA operations to function using a single BN_CTX.
2536 *) Preliminary support for certificate policy evaluation and checking. This
2537 is initially intended to pass the tests outlined in "Conformance Testing
2538 of Relying Party Client Certificate Path Processing Logic" v1.07.
2541 *) bn_dup_expand() has been deprecated, it was introduced in 0.9.7 and
2542 remained unused and not that useful. A variety of other little bignum
2543 tweaks and fixes have also been made continuing on from the audit (see
2547 *) Constify all or almost all d2i, c2i, s2i and r2i functions, along with
2548 associated ASN1, EVP and SSL functions and old ASN1 macros.
2551 *) BN_zero() only needs to set 'top' and 'neg' to zero for correct results,
2552 and this should never fail. So the return value from the use of
2553 BN_set_word() (which can fail due to needless expansion) is now deprecated;
2554 if OPENSSL_NO_DEPRECATED is defined, BN_zero() is a void macro.
2557 *) BN_CTX_get() should return zero-valued bignums, providing the same
2558 initialised value as BN_new().
2559 [Geoff Thorpe, suggested by Ulf Möller]
2561 *) Support for inhibitAnyPolicy certificate extension.
2564 *) An audit of the BIGNUM code is underway, for which debugging code is
2565 enabled when BN_DEBUG is defined. This makes stricter enforcements on what
2566 is considered valid when processing BIGNUMs, and causes execution to
2567 assert() when a problem is discovered. If BN_DEBUG_RAND is defined,
2568 further steps are taken to deliberately pollute unused data in BIGNUM
2569 structures to try and expose faulty code further on. For now, openssl will
2570 (in its default mode of operation) continue to tolerate the inconsistent
2571 forms that it has tolerated in the past, but authors and packagers should
2572 consider trying openssl and their own applications when compiled with
2573 these debugging symbols defined. It will help highlight potential bugs in
2574 their own code, and will improve the test coverage for OpenSSL itself. At
2575 some point, these tighter rules will become openssl's default to improve
2576 maintainability, though the assert()s and other overheads will remain only
2577 in debugging configurations. See bn.h for more details.
2578 [Geoff Thorpe, Nils Larsch, Ulf Möller]
2580 *) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure
2581 that can only be obtained through BN_CTX_new() (which implicitly
2582 initialises it). The presence of this function only made it possible
2583 to overwrite an existing structure (and cause memory leaks).
2586 *) Because of the callback-based approach for implementing LHASH as a
2587 template type, lh_insert() adds opaque objects to hash-tables and
2588 lh_doall() or lh_doall_arg() are typically used with a destructor callback
2589 to clean up those corresponding objects before destroying the hash table
2590 (and losing the object pointers). So some over-zealous constifications in
2591 LHASH have been relaxed so that lh_insert() does not take (nor store) the
2592 objects as "const" and the lh_doall[_arg] callback wrappers are not
2593 prototyped to have "const" restrictions on the object pointers they are
2594 given (and so aren't required to cast them away any more).
2597 *) The tmdiff.h API was so ugly and minimal that our own timing utility
2598 (speed) prefers to use its own implementation. The two implementations
2599 haven't been consolidated as yet (volunteers?) but the tmdiff API has had
2600 its object type properly exposed (MS_TM) instead of casting to/from "char
2601 *". This may still change yet if someone realises MS_TM and "ms_time_***"
2602 aren't necessarily the greatest nomenclatures - but this is what was used
2603 internally to the implementation so I've used that for now.
2606 *) Ensure that deprecated functions do not get compiled when
2607 OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
2608 the self-tests were still using deprecated key-generation functions so
2609 these have been updated also.
2612 *) Reorganise PKCS#7 code to separate the digest location functionality
2613 into PKCS7_find_digest(), digest addtion into PKCS7_bio_add_digest().
2614 New function PKCS7_set_digest() to set the digest type for PKCS#7
2615 digestedData type. Add additional code to correctly generate the
2616 digestedData type and add support for this type in PKCS7 initialization
2620 *) New function PKCS7_set0_type_other() this initializes a PKCS7
2621 structure of type "other".
2624 *) Fix prime generation loop in crypto/bn/bn_prime.pl by making
2625 sure the loop does correctly stop and breaking ("division by zero")
2626 modulus operations are not performed. The (pre-generated) prime
2627 table crypto/bn/bn_prime.h was already correct, but it could not be
2628 re-generated on some platforms because of the "division by zero"
2629 situation in the script.
2630 [Ralf S. Engelschall]
2632 *) Update support for ECC-based TLS ciphersuites according to
2633 draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
2634 SHA-1 now is only used for "small" curves (where the
2635 representation of a field element takes up to 24 bytes); for
2636 larger curves, the field element resulting from ECDH is directly
2637 used as premaster secret.
2638 [Douglas Stebila (Sun Microsystems Laboratories)]
2640 *) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
2641 curve secp160r1 to the tests.
2642 [Douglas Stebila (Sun Microsystems Laboratories)]
2644 *) Add the possibility to load symbols globally with DSO.
2645 [Götz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
2647 *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
2648 control of the error stack.
2651 *) Add support for STORE in ENGINE.
2654 *) Add the STORE type. The intention is to provide a common interface
2655 to certificate and key stores, be they simple file-based stores, or
2656 HSM-type store, or LDAP stores, or...
2657 NOTE: The code is currently UNTESTED and isn't really used anywhere.
2660 *) Add a generic structure called OPENSSL_ITEM. This can be used to
2661 pass a list of arguments to any function as well as provide a way
2662 for a function to pass data back to the caller.
2665 *) Add the functions BUF_strndup() and BUF_memdup(). BUF_strndup()
2666 works like BUF_strdup() but can be used to duplicate a portion of
2667 a string. The copy gets NUL-terminated. BUF_memdup() duplicates
2671 *) Add the function sk_find_ex() which works like sk_find(), but will
2672 return an index to an element even if an exact match couldn't be
2673 found. The index is guaranteed to point at the element where the
2674 searched-for key would be inserted to preserve sorting order.
2677 *) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
2678 takes an extra flags argument for optional functionality. Currently,
2679 the following flags are defined:
2681 OBJ_BSEARCH_VALUE_ON_NOMATCH
2682 This one gets OBJ_bsearch_ex() to return a pointer to the first
2683 element where the comparing function returns a negative or zero
2686 OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
2687 This one gets OBJ_bsearch_ex() to return a pointer to the first
2688 element where the comparing function returns zero. This is useful
2689 if there are more than one element where the comparing function
2693 *) Make it possible to create self-signed certificates with 'openssl ca'
2694 in such a way that the self-signed certificate becomes part of the
2695 CA database and uses the same mechanisms for serial number generation
2696 as all other certificate signing. The new flag '-selfsign' enables
2697 this functionality. Adapt CA.sh and CA.pl.in.
2700 *) Add functionality to check the public key of a certificate request
2701 against a given private. This is useful to check that a certificate
2702 request can be signed by that key (self-signing).
2705 *) Make it possible to have multiple active certificates with the same
2706 subject in the CA index file. This is done only if the keyword
2707 'unique_subject' is set to 'no' in the main CA section (default
2708 if 'CA_default') of the configuration file. The value is saved
2709 with the database itself in a separate index attribute file,
2710 named like the index file with '.attr' appended to the name.
2713 *) Generate muti valued AVAs using '+' notation in config files for
2717 *) Support for nameConstraints certificate extension.
2720 *) Support for policyConstraints certificate extension.
2723 *) Support for policyMappings certificate extension.
2726 *) Make sure the default DSA_METHOD implementation only uses its
2727 dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
2728 and change its own handlers to be NULL so as to remove unnecessary
2729 indirection. This lets alternative implementations fallback to the
2730 default implementation more easily.
2733 *) Support for directoryName in GeneralName related extensions
2737 *) Make it possible to link applications using Makefile.shared.
2738 Make that possible even when linking against static libraries!
2741 *) Support for single pass processing for S/MIME signing. This now
2742 means that S/MIME signing can be done from a pipe, in addition
2743 cleartext signing (multipart/signed type) is effectively streaming
2744 and the signed data does not need to be all held in memory.
2746 This is done with a new flag PKCS7_STREAM. When this flag is set
2747 PKCS7_sign() only initializes the PKCS7 structure and the actual signing
2748 is done after the data is output (and digests calculated) in
2749 SMIME_write_PKCS7().
2752 *) Add full support for -rpath/-R, both in shared libraries and
2753 applications, at least on the platforms where it's known how
2757 *) In crypto/ec/ec_mult.c, implement fast point multiplication with
2758 precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
2759 will now compute a table of multiples of the generator that
2760 makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
2761 faster (notably in the case of a single point multiplication,
2762 scalar * generator).
2763 [Nils Larsch, Bodo Moeller]
2765 *) IPv6 support for certificate extensions. The various extensions
2766 which use the IP:a.b.c.d can now take IPv6 addresses using the
2767 formats of RFC1884 2.2 . IPv6 addresses are now also displayed
2771 *) Added an ENGINE that implements RSA by performing private key
2772 exponentiations with the GMP library. The conversions to and from
2773 GMP's mpz_t format aren't optimised nor are any montgomery forms
2774 cached, and on x86 it appears OpenSSL's own performance has caught up.
2775 However there are likely to be other architectures where GMP could
2776 provide a boost. This ENGINE is not built in by default, but it can be
2777 specified at Configure time and should be accompanied by the necessary
2778 linker additions, eg;
2779 ./config -DOPENSSL_USE_GMP -lgmp
2782 *) "openssl engine" will not display ENGINE/DSO load failure errors when
2783 testing availability of engines with "-t" - the old behaviour is
2784 produced by increasing the feature's verbosity with "-tt".
2787 *) ECDSA routines: under certain error conditions uninitialized BN objects
2788 could be freed. Solution: make sure initialization is performed early
2789 enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
2793 *) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
2794 and DH_METHOD (eg. by ENGINE implementations) to override the normal
2795 software implementations. For DSA and DH, parameter generation can
2796 also be overriden by providing the appropriate method callbacks.
2799 *) Change the "progress" mechanism used in key-generation and
2800 primality testing to functions that take a new BN_GENCB pointer in
2801 place of callback/argument pairs. The new API functions have "_ex"
2802 postfixes and the older functions are reimplemented as wrappers for
2803 the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
2804 declarations of the old functions to help (graceful) attempts to
2805 migrate to the new functions. Also, the new key-generation API
2806 functions operate on a caller-supplied key-structure and return
2807 success/failure rather than returning a key or NULL - this is to
2808 help make "keygen" another member function of RSA_METHOD etc.
2810 Example for using the new callback interface:
2812 int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
2816 BN_GENCB_set(&my_cb, my_callback, my_arg);
2818 return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
2819 /* For the meaning of a, b in calls to my_callback(), see the
2820 * documentation of the function that calls the callback.
2821 * cb will point to my_cb; my_arg can be retrieved as cb->arg.
2822 * my_callback should return 1 if it wants BN_is_prime_ex()
2823 * to continue, or 0 to stop.
2828 *) Change the ZLIB compression method to be stateful, and make it
2829 available to TLS with the number defined in
2830 draft-ietf-tls-compression-04.txt.
2833 *) Add the ASN.1 structures and functions for CertificatePair, which
2834 is defined as follows (according to X.509_4thEditionDraftV6.pdf):
2836 CertificatePair ::= SEQUENCE {
2837 forward [0] Certificate OPTIONAL,
2838 reverse [1] Certificate OPTIONAL,
2839 -- at least one of the pair shall be present -- }
2841 Also implement the PEM functions to read and write certificate
2842 pairs, and defined the PEM tag as "CERTIFICATE PAIR".
2844 This needed to be defined, mostly for the sake of the LDAP
2845 attribute crossCertificatePair, but may prove useful elsewhere as
2849 *) Make it possible to inhibit symlinking of shared libraries in
2850 Makefile.shared, for Cygwin's sake.
2853 *) Extend the BIGNUM API by creating a function
2854 void BN_set_negative(BIGNUM *a, int neg);
2855 and a macro that behave like
2856 int BN_is_negative(const BIGNUM *a);
2858 to avoid the need to access 'a->neg' directly in applications.
2861 *) Implement fast modular reduction for pseudo-Mersenne primes
2862 used in NIST curves (crypto/bn/bn_nist.c, crypto/ec/ecp_nist.c).
2863 EC_GROUP_new_curve_GFp() will now automatically use this
2865 [Nils Larsch <nla@trustcenter.de>]
2867 *) Add new lock type (CRYPTO_LOCK_BN).
2870 *) Change the ENGINE framework to automatically load engines
2871 dynamically from specific directories unless they could be
2872 found to already be built in or loaded. Move all the
2873 current engines except for the cryptodev one to a new
2875 The engines in engines/ are built as shared libraries if
2876 the "shared" options was given to ./Configure or ./config.
2877 Otherwise, they are inserted in libcrypto.a.
2878 /usr/local/ssl/engines is the default directory for dynamic
2879 engines, but that can be overriden at configure time through
2880 the usual use of --prefix and/or --openssldir, and at run
2881 time with the environment variable OPENSSL_ENGINES.
2882 [Geoff Thorpe and Richard Levitte]
2884 *) Add Makefile.shared, a helper makefile to build shared
2885 libraries. Addapt Makefile.org.
2888 *) Add version info to Win32 DLLs.
2889 [Peter 'Luna' Runestig" <peter@runestig.com>]
2891 *) Add new 'medium level' PKCS#12 API. Certificates and keys
2892 can be added using this API to created arbitrary PKCS#12
2893 files while avoiding the low level API.
2895 New options to PKCS12_create(), key or cert can be NULL and
2896 will then be omitted from the output file. The encryption
2897 algorithm NIDs can be set to -1 for no encryption, the mac
2898 iteration count can be set to 0 to omit the mac.
2900 Enhance pkcs12 utility by making the -nokeys and -nocerts
2901 options work when creating a PKCS#12 file. New option -nomac
2902 to omit the mac, NONE can be set for an encryption algorithm.
2903 New code is modified to use the enhanced PKCS12_create()
2904 instead of the low level API.
2907 *) Extend ASN1 encoder to support indefinite length constructed
2908 encoding. This can output sequences tags and octet strings in
2909 this form. Modify pk7_asn1.c to support indefinite length
2910 encoding. This is experimental and needs additional code to
2911 be useful, such as an ASN1 bio and some enhanced streaming
2914 Extend template encode functionality so that tagging is passed
2915 down to the template encoder.
2918 *) Let 'openssl req' fail if an argument to '-newkey' is not
2919 recognized instead of using RSA as a default.
2922 *) Add support for ECC-based ciphersuites from draft-ietf-tls-ecc-01.txt.
2923 As these are not official, they are not included in "ALL";
2924 the "ECCdraft" ciphersuite group alias can be used to select them.
2925 [Vipul Gupta and Sumit Gupta (Sun Microsystems Laboratories)]
2927 *) Add ECDH engine support.
2928 [Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]
2930 *) Add ECDH in new directory crypto/ecdh/.
2931 [Douglas Stebila (Sun Microsystems Laboratories)]
2933 *) Let BN_rand_range() abort with an error after 100 iterations
2934 without success (which indicates a broken PRNG).
2937 *) Change BN_mod_sqrt() so that it verifies that the input value
2938 is really the square of the return value. (Previously,
2939 BN_mod_sqrt would show GIGO behaviour.)
2942 *) Add named elliptic curves over binary fields from X9.62, SECG,
2943 and WAP/WTLS; add OIDs that were still missing.
2945 [Sheueling Chang Shantz and Douglas Stebila
2946 (Sun Microsystems Laboratories)]
2948 *) Extend the EC library for elliptic curves over binary fields
2949 (new files ec2_smpl.c, ec2_smpt.c, ec2_mult.c in crypto/ec/).
2952 EC_GF2m_simple_method
2956 EC_GROUP_new_curve_GF2m
2957 EC_GROUP_set_curve_GF2m
2958 EC_GROUP_get_curve_GF2m
2959 EC_POINT_set_affine_coordinates_GF2m
2960 EC_POINT_get_affine_coordinates_GF2m
2961 EC_POINT_set_compressed_coordinates_GF2m
2963 Point compression for binary fields is disabled by default for
2964 patent reasons (compile with OPENSSL_EC_BIN_PT_COMP defined to
2967 As binary polynomials are represented as BIGNUMs, various members
2968 of the EC_GROUP and EC_POINT data structures can be shared
2969 between the implementations for prime fields and binary fields;
2970 the above ..._GF2m functions (except for EX_GROUP_new_curve_GF2m)
2971 are essentially identical to their ..._GFp counterparts.
2972 (For simplicity, the '..._GFp' prefix has been dropped from
2973 various internal method names.)
2975 An internal 'field_div' method (similar to 'field_mul' and
2976 'field_sqr') has been added; this is used only for binary fields.
2978 [Sheueling Chang Shantz and Douglas Stebila
2979 (Sun Microsystems Laboratories)]
2981 *) Optionally dispatch EC_POINT_mul(), EC_POINT_precompute_mult()
2982 through methods ('mul', 'precompute_mult').
2984 The generic implementations (now internally called 'ec_wNAF_mul'
2985 and 'ec_wNAF_precomputed_mult') remain the default if these
2986 methods are undefined.
2988 [Sheueling Chang Shantz and Douglas Stebila
2989 (Sun Microsystems Laboratories)]
2991 *) New function EC_GROUP_get_degree, which is defined through
2992 EC_METHOD. For curves over prime fields, this returns the bit
2993 length of the modulus.
2995 [Sheueling Chang Shantz and Douglas Stebila
2996 (Sun Microsystems Laboratories)]
2998 *) New functions EC_GROUP_dup, EC_POINT_dup.
2999 (These simply call ..._new and ..._copy).
3001 [Sheueling Chang Shantz and Douglas Stebila
3002 (Sun Microsystems Laboratories)]
3004 *) Add binary polynomial arithmetic software in crypto/bn/bn_gf2m.c.
3005 Polynomials are represented as BIGNUMs (where the sign bit is not
3006 used) in the following functions [macros]:
3009 BN_GF2m_sub [= BN_GF2m_add]
3010 BN_GF2m_mod [wrapper for BN_GF2m_mod_arr]
3011 BN_GF2m_mod_mul [wrapper for BN_GF2m_mod_mul_arr]
3012 BN_GF2m_mod_sqr [wrapper for BN_GF2m_mod_sqr_arr]
3014 BN_GF2m_mod_exp [wrapper for BN_GF2m_mod_exp_arr]
3015 BN_GF2m_mod_sqrt [wrapper for BN_GF2m_mod_sqrt_arr]
3016 BN_GF2m_mod_solve_quad [wrapper for BN_GF2m_mod_solve_quad_arr]
3017 BN_GF2m_cmp [= BN_ucmp]
3019 (Note that only the 'mod' functions are actually for fields GF(2^m).
3020 BN_GF2m_add() is misnomer, but this is for the sake of consistency.)
3022 For some functions, an the irreducible polynomial defining a
3023 field can be given as an 'unsigned int[]' with strictly
3024 decreasing elements giving the indices of those bits that are set;
3025 i.e., p[] represents the polynomial
3026 f(t) = t^p[0] + t^p[1] + ... + t^p[k]
3028 p[0] > p[1] > ... > p[k] = 0.
3029 This applies to the following functions:
3034 BN_GF2m_mod_inv_arr [wrapper for BN_GF2m_mod_inv]
3035 BN_GF2m_mod_div_arr [wrapper for BN_GF2m_mod_div]
3037 BN_GF2m_mod_sqrt_arr
3038 BN_GF2m_mod_solve_quad_arr
3042 Conversion can be performed by the following functions:
3047 bntest.c has additional tests for binary polynomial arithmetic.
3049 Two implementations for BN_GF2m_mod_div() are available.
3050 The default algorithm simply uses BN_GF2m_mod_inv() and
3051 BN_GF2m_mod_mul(). The alternative algorithm is compiled in only
3052 if OPENSSL_SUN_GF2M_DIV is defined (patent pending; read the
3053 copyright notice in crypto/bn/bn_gf2m.c before enabling it).
3055 [Sheueling Chang Shantz and Douglas Stebila
3056 (Sun Microsystems Laboratories)]
3058 *) Add new error code 'ERR_R_DISABLED' that can be used when some
3059 functionality is disabled at compile-time.
3060 [Douglas Stebila <douglas.stebila@sun.com>]
3062 *) Change default behaviour of 'openssl asn1parse' so that more
3063 information is visible when viewing, e.g., a certificate:
3065 Modify asn1_parse2 (crypto/asn1/asn1_par.c) so that in non-'dump'
3066 mode the content of non-printable OCTET STRINGs is output in a
3067 style similar to INTEGERs, but with '[HEX DUMP]' prepended to
3068 avoid the appearance of a printable string.
3069 [Nils Larsch <nla@trustcenter.de>]
3071 *) Add 'asn1_flag' and 'asn1_form' member to EC_GROUP with access
3073 EC_GROUP_set_asn1_flag()
3074 EC_GROUP_get_asn1_flag()
3075 EC_GROUP_set_point_conversion_form()
3076 EC_GROUP_get_point_conversion_form()
3077 These control ASN1 encoding details:
3078 - Curves (i.e., groups) are encoded explicitly unless asn1_flag
3079 has been set to OPENSSL_EC_NAMED_CURVE.
3080 - Points are encoded in uncompressed form by default; options for
3081 asn1_for are as for point2oct, namely
3082 POINT_CONVERSION_COMPRESSED
3083 POINT_CONVERSION_UNCOMPRESSED
3084 POINT_CONVERSION_HYBRID
3086 Also add 'seed' and 'seed_len' members to EC_GROUP with access
3089 EC_GROUP_get0_seed()
3090 EC_GROUP_get_seed_len()
3091 This is used only for ASN1 purposes (so far).
3092 [Nils Larsch <nla@trustcenter.de>]
3094 *) Add 'field_type' member to EC_METHOD, which holds the NID
3095 of the appropriate field type OID. The new function
3096 EC_METHOD_get_field_type() returns this value.
3097 [Nils Larsch <nla@trustcenter.de>]
3102 EC_POINT_point2hex()
3103 EC_POINT_hex2point()
3104 providing useful interfaces to EC_POINT_point2oct() and
3105 EC_POINT_oct2point().
3106 [Nils Larsch <nla@trustcenter.de>]
3108 *) Change internals of the EC library so that the functions
3109 EC_GROUP_set_generator()
3110 EC_GROUP_get_generator()
3111 EC_GROUP_get_order()
3112 EC_GROUP_get_cofactor()
3113 are implemented directly in crypto/ec/ec_lib.c and not dispatched
3114 to methods, which would lead to unnecessary code duplication when
3115 adding different types of curves.
3116 [Nils Larsch <nla@trustcenter.de> with input by Bodo Moeller]
3118 *) Implement compute_wNAF (crypto/ec/ec_mult.c) without BIGNUM
3119 arithmetic, and such that modified wNAFs are generated
3120 (which avoid length expansion in many cases).
3123 *) Add a function EC_GROUP_check_discriminant() (defined via
3124 EC_METHOD) that verifies that the curve discriminant is non-zero.
3126 Add a function EC_GROUP_check() that makes some sanity tests
3127 on a EC_GROUP, its generator and order. This includes
3128 EC_GROUP_check_discriminant().
3129 [Nils Larsch <nla@trustcenter.de>]
3131 *) Add ECDSA in new directory crypto/ecdsa/.
3133 Add applications 'openssl ecparam' and 'openssl ecdsa'
3134 (these are based on 'openssl dsaparam' and 'openssl dsa').
3136 ECDSA support is also included in various other files across the
3137 library. Most notably,
3138 - 'openssl req' now has a '-newkey ecdsa:file' option;
3139 - EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
3140 - X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
3141 d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
3142 them suitable for ECDSA where domain parameters must be
3143 extracted before the specific public key;
3144 - ECDSA engine support has been added.
3145 [Nils Larsch <nla@trustcenter.de>]
3147 *) Include some named elliptic curves, and add OIDs from X9.62,
3148 SECG, and WAP/WTLS. Each curve can be obtained from the new
3150 EC_GROUP_new_by_curve_name(),
3151 and the list of available named curves can be obtained with
3152 EC_get_builtin_curves().
3153 Also add a 'curve_name' member to EC_GROUP objects, which can be
3155 EC_GROUP_set_curve_name()
3156 EC_GROUP_get_curve_name()
3157 [Nils Larsch <larsch@trustcenter.de, Bodo Moeller]
3159 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
3160 was actually never needed) and in BN_mul(). The removal in BN_mul()
3161 required a small change in bn_mul_part_recursive() and the addition
3162 of the functions bn_cmp_part_words(), bn_sub_part_words() and
3163 bn_add_part_words(), which do the same thing as bn_cmp_words(),
3164 bn_sub_words() and bn_add_words() except they take arrays with
3168 Changes between 0.9.7l and 0.9.7m [23 Feb 2007]
3170 *) Cleanse PEM buffers before freeing them since they may contain
3172 [Benjamin Bennett <ben@psc.edu>]
3174 *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
3175 a ciphersuite string such as "DEFAULT:RSA" cannot enable
3176 authentication-only ciphersuites.
3179 *) Since AES128 and AES256 share a single mask bit in the logic of
3180 ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
3181 kludge to work properly if AES128 is available and AES256 isn't.
3184 *) Expand security boundary to match 1.1.1 module.
3187 *) Remove redundant features: hash file source, editing of test vectors
3188 modify fipsld to use external fips_premain.c signature.
3191 *) New perl script mkfipsscr.pl to create shell scripts or batch files to
3192 run algorithm test programs.
3195 *) Make algorithm test programs more tolerant of whitespace.
3198 *) Have SSL/TLS server implementation tolerate "mismatched" record
3199 protocol version while receiving ClientHello even if the
3200 ClientHello is fragmented. (The server can't insist on the
3201 particular protocol version it has chosen before the ServerHello
3202 message has informed the client about his choice.)
3205 *) Load error codes if they are not already present instead of using a
3206 static variable. This allows them to be cleanly unloaded and reloaded.
3209 Changes between 0.9.7k and 0.9.7l [28 Sep 2006]
3211 *) Introduce limits to prevent malicious keys being able to
3212 cause a denial of service. (CVE-2006-2940)
3213 [Steve Henson, Bodo Moeller]
3215 *) Fix ASN.1 parsing of certain invalid structures that can result
3216 in a denial of service. (CVE-2006-2937) [Steve Henson]
3218 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
3219 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
3221 *) Fix SSL client code which could crash if connecting to a
3222 malicious SSLv2 server. (CVE-2006-4343)
3223 [Tavis Ormandy and Will Drewry, Google Security Team]
3225 *) Change ciphersuite string processing so that an explicit
3226 ciphersuite selects this one ciphersuite (so that "AES256-SHA"
3227 will no longer include "AES128-SHA"), and any other similar
3228 ciphersuite (same bitmap) from *other* protocol versions (so that
3229 "RC4-MD5" will still include both the SSL 2.0 ciphersuite and the
3230 SSL 3.0/TLS 1.0 ciphersuite). This is a backport combining
3231 changes from 0.9.8b and 0.9.8d.
3234 Changes between 0.9.7j and 0.9.7k [05 Sep 2006]
3236 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
3237 (CVE-2006-4339) [Ben Laurie and Google Security Team]
3239 *) Change the Unix randomness entropy gathering to use poll() when
3240 possible instead of select(), since the latter has some
3241 undesirable limitations.
3242 [Darryl Miles via Richard Levitte and Bodo Moeller]
3244 *) Disable rogue ciphersuites:
3246 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
3247 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
3248 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
3250 The latter two were purportedly from
3251 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
3254 Also deactive the remaining ciphersuites from
3255 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
3256 unofficial, and the ID has long expired.
3259 *) Fix RSA blinding Heisenbug (problems sometimes occured on
3260 dual-core machines) and other potential thread-safety issues.
3263 Changes between 0.9.7i and 0.9.7j [04 May 2006]
3265 *) Adapt fipsld and the build system to link against the validated FIPS
3266 module in FIPS mode.
3269 *) Fixes for VC++ 2005 build under Windows.
3272 *) Add new Windows build target VC-32-GMAKE for VC++. This uses GNU make
3273 from a Windows bash shell such as MSYS. It is autodetected from the
3274 "config" script when run from a VC++ environment. Modify standard VC++
3275 build to use fipscanister.o from the GNU make build.
3278 Changes between 0.9.7h and 0.9.7i [14 Oct 2005]
3280 *) Wrapped the definition of EVP_MAX_MD_SIZE in a #ifdef OPENSSL_FIPS.
3281 The value now differs depending on if you build for FIPS or not.
3282 BEWARE! A program linked with a shared FIPSed libcrypto can't be
3283 safely run with a non-FIPSed libcrypto, as it may crash because of
3284 the difference induced by this change.
3287 Changes between 0.9.7g and 0.9.7h [11 Oct 2005]
3289 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
3290 (part of SSL_OP_ALL). This option used to disable the
3291 countermeasure against man-in-the-middle protocol-version
3292 rollback in the SSL 2.0 server implementation, which is a bad
3293 idea. (CVE-2005-2969)
3295 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
3296 for Information Security, National Institute of Advanced Industrial
3297 Science and Technology [AIST], Japan)]
3299 *) Minimal support for X9.31 signatures and PSS padding modes. This is
3300 mainly for FIPS compliance and not fully integrated at this stage.
3303 *) For DSA signing, unless DSA_FLAG_NO_EXP_CONSTTIME is set, perform
3304 the exponentiation using a fixed-length exponent. (Otherwise,
3305 the information leaked through timing could expose the secret key
3306 after many signatures; cf. Bleichenbacher's attack on DSA with
3310 *) Make a new fixed-window mod_exp implementation the default for
3311 RSA, DSA, and DH private-key operations so that the sequence of
3312 squares and multiplies and the memory access pattern are
3313 independent of the particular secret key. This will mitigate
3314 cache-timing and potential related attacks.
3316 BN_mod_exp_mont_consttime() is the new exponentiation implementation,
3317 and this is automatically used by BN_mod_exp_mont() if the new flag
3318 BN_FLG_EXP_CONSTTIME is set for the exponent. RSA, DSA, and DH
3319 will use this BN flag for private exponents unless the flag
3320 RSA_FLAG_NO_EXP_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME, or
3321 DH_FLAG_NO_EXP_CONSTTIME, respectively, is set.
3323 [Matthew D Wood (Intel Corp), with some changes by Bodo Moeller]
3325 *) Change the client implementation for SSLv23_method() and
3326 SSLv23_client_method() so that is uses the SSL 3.0/TLS 1.0
3327 Client Hello message format if the SSL_OP_NO_SSLv2 option is set.
3328 (Previously, the SSL 2.0 backwards compatible Client Hello
3329 message format would be used even with SSL_OP_NO_SSLv2.)
3332 *) Add support for smime-type MIME parameter in S/MIME messages which some
3336 *) New function BN_MONT_CTX_set_locked() to set montgomery parameters in
3337 a threadsafe manner. Modify rsa code to use new function and add calls
3338 to dsa and dh code (which had race conditions before).
3341 *) Include the fixed error library code in the C error file definitions
3342 instead of fixing them up at runtime. This keeps the error code
3343 structures constant.
3346 Changes between 0.9.7f and 0.9.7g [11 Apr 2005]
3348 [NB: OpenSSL 0.9.7h and later 0.9.7 patch levels were released after
3351 *) Fixes for newer kerberos headers. NB: the casts are needed because
3352 the 'length' field is signed on one version and unsigned on another
3353 with no (?) obvious way to tell the difference, without these VC++
3354 complains. Also the "definition" of FAR (blank) is no longer included
3355 nor is the error ENOMEM. KRB5_PRIVATE has to be set to 1 to pick up
3356 some needed definitions.
3359 *) Undo Cygwin change.
3362 *) Added support for proxy certificates according to RFC 3820.
3363 Because they may be a security thread to unaware applications,
3364 they must be explicitely allowed in run-time. See
3365 docs/HOWTO/proxy_certificates.txt for further information.
3368 Changes between 0.9.7e and 0.9.7f [22 Mar 2005]
3370 *) Use (SSL_RANDOM_VALUE - 4) bytes of pseudo random data when generating
3371 server and client random values. Previously
3372 (SSL_RANDOM_VALUE - sizeof(time_t)) would be used which would result in
3373 less random data when sizeof(time_t) > 4 (some 64 bit platforms).
3375 This change has negligible security impact because:
3377 1. Server and client random values still have 24 bytes of pseudo random
3380 2. Server and client random values are sent in the clear in the initial
3383 3. The master secret is derived using the premaster secret (48 bytes in
3384 size for static RSA ciphersuites) as well as client server and random
3387 The OpenSSL team would like to thank the UK NISCC for bringing this issue
3390 [Stephen Henson, reported by UK NISCC]
3392 *) Use Windows randomness collection on Cygwin.
3395 *) Fix hang in EGD/PRNGD query when communication socket is closed
3396 prematurely by EGD/PRNGD.
3397 [Darren Tucker <dtucker@zip.com.au> via Lutz Jänicke, resolves #1014]
3399 *) Prompt for pass phrases when appropriate for PKCS12 input format.
3402 *) Back-port of selected performance improvements from development
3403 branch, as well as improved support for PowerPC platforms.
3406 *) Add lots of checks for memory allocation failure, error codes to indicate
3407 failure and freeing up memory if a failure occurs.
3408 [Nauticus Networks SSL Team <openssl@nauticusnet.com>, Steve Henson]
3410 *) Add new -passin argument to dgst.
3413 *) Perform some character comparisons of different types in X509_NAME_cmp:
3414 this is needed for some certificates that reencode DNs into UTF8Strings
3415 (in violation of RFC3280) and can't or wont issue name rollover
3419 *) Make an explicit check during certificate validation to see that
3420 the CA setting in each certificate on the chain is correct. As a
3421 side effect always do the following basic checks on extensions,
3422 not just when there's an associated purpose to the check:
3424 - if there is an unhandled critical extension (unless the user
3425 has chosen to ignore this fault)
3426 - if the path length has been exceeded (if one is set at all)
3427 - that certain extensions fit the associated purpose (if one has
3431 Changes between 0.9.7d and 0.9.7e [25 Oct 2004]
3433 *) Avoid a race condition when CRLs are checked in a multi threaded
3434 environment. This would happen due to the reordering of the revoked
3435 entries during signature checking and serial number lookup. Now the
3436 encoding is cached and the serial number sort performed under a lock.
3437 Add new STACK function sk_is_sorted().
3440 *) Add Delta CRL to the extension code.
3443 *) Various fixes to s3_pkt.c so alerts are sent properly.
3444 [David Holmes <d.holmes@f5.com>]
3446 *) Reduce the chances of duplicate issuer name and serial numbers (in
3447 violation of RFC3280) using the OpenSSL certificate creation utilities.
3448 This is done by creating a random 64 bit value for the initial serial
3449 number when a serial number file is created or when a self signed
3450 certificate is created using 'openssl req -x509'. The initial serial
3451 number file is created using 'openssl x509 -next_serial' in CA.pl
3452 rather than being initialized to 1.
3455 Changes between 0.9.7c and 0.9.7d [17 Mar 2004]
3457 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
3458 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
3459 [Joe Orton, Steve Henson]
3461 *) Fix flaw in SSL/TLS handshaking when using Kerberos ciphersuites
3463 [Joe Orton, Steve Henson]
3465 *) Make it possible to have multiple active certificates with the same
3466 subject in the CA index file. This is done only if the keyword
3467 'unique_subject' is set to 'no' in the main CA section (default
3468 if 'CA_default') of the configuration file. The value is saved
3469 with the database itself in a separate index attribute file,
3470 named like the index file with '.attr' appended to the name.
3473 *) X509 verify fixes. Disable broken certificate workarounds when
3474 X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
3475 keyUsage extension present. Don't accept CRLs with unhandled critical
3476 extensions: since verify currently doesn't process CRL extensions this
3477 rejects a CRL with *any* critical extensions. Add new verify error codes
3481 *) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
3482 A clarification of RFC2560 will require the use of OCTET STRINGs and
3483 some implementations cannot handle the current raw format. Since OpenSSL
3484 copies and compares OCSP nonces as opaque blobs without any attempt at
3485 parsing them this should not create any compatibility issues.
3488 *) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
3489 calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
3490 this HMAC (and other) operations are several times slower than OpenSSL
3494 *) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
3495 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
3497 *) Use the correct content when signing type "other".
3500 Changes between 0.9.7b and 0.9.7c [30 Sep 2003]
3502 *) Fix various bugs revealed by running the NISCC test suite:
3504 Stop out of bounds reads in the ASN1 code when presented with
3505 invalid tags (CVE-2003-0543 and CVE-2003-0544).
3507 Free up ASN1_TYPE correctly if ANY type is invalid (CVE-2003-0545).
3509 If verify callback ignores invalid public key errors don't try to check
3510 certificate signature with the NULL public key.
3514 *) New -ignore_err option in ocsp application to stop the server
3515 exiting on the first error in a request.
3518 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
3519 if the server requested one: as stated in TLS 1.0 and SSL 3.0
3523 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
3524 extra data after the compression methods not only for TLS 1.0
3525 but also for SSL 3.0 (as required by the specification).
3526 [Bodo Moeller; problem pointed out by Matthias Loepfe]
3528 *) Change X509_certificate_type() to mark the key as exported/exportable
3529 when it's 512 *bits* long, not 512 bytes.
3532 *) Change AES_cbc_encrypt() so it outputs exact multiple of
3533 blocks during encryption.
3536 *) Various fixes to base64 BIO and non blocking I/O. On write
3537 flushes were not handled properly if the BIO retried. On read
3538 data was not being buffered properly and had various logic bugs.
3539 This also affects blocking I/O when the data being decoded is a
3543 *) Various S/MIME bugfixes and compatibility changes:
3544 output correct application/pkcs7 MIME type if
3545 PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
3546 Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
3547 of files as .eml work). Correctly handle very long lines in MIME
3551 Changes between 0.9.7a and 0.9.7b [10 Apr 2003]
3553 *) Countermeasure against the Klima-Pokorny-Rosa extension of
3554 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
3555 a protocol version number mismatch like a decryption error
3556 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
3559 *) Turn on RSA blinding by default in the default implementation
3560 to avoid a timing attack. Applications that don't want it can call
3561 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
3562 They would be ill-advised to do so in most cases.
3563 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
3565 *) Change RSA blinding code so that it works when the PRNG is not
3566 seeded (in this case, the secret RSA exponent is abused as
3567 an unpredictable seed -- if it is not unpredictable, there
3568 is no point in blinding anyway). Make RSA blinding thread-safe
3569 by remembering the creator's thread ID in rsa->blinding and
3570 having all other threads use local one-time blinding factors
3571 (this requires more computation than sharing rsa->blinding, but
3572 avoids excessive locking; and if an RSA object is not shared
3573 between threads, blinding will still be very fast).
3576 *) Fixed a typo bug that would cause ENGINE_set_default() to set an
3577 ENGINE as defaults for all supported algorithms irrespective of
3578 the 'flags' parameter. 'flags' is now honoured, so applications
3579 should make sure they are passing it correctly.
3582 *) Target "mingw" now allows native Windows code to be generated in
3583 the Cygwin environment as well as with the MinGW compiler.
3586 Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
3588 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
3589 via timing by performing a MAC computation even if incorrrect
3590 block cipher padding has been found. This is a countermeasure
3591 against active attacks where the attacker has to distinguish
3592 between bad padding and a MAC verification error. (CVE-2003-0078)
3594 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
3595 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
3596 Martin Vuagnoux (EPFL, Ilion)]
3598 *) Make the no-err option work as intended. The intention with no-err
3599 is not to have the whole error stack handling routines removed from
3600 libcrypto, it's only intended to remove all the function name and
3601 reason texts, thereby removing some of the footprint that may not
3602 be interesting if those errors aren't displayed anyway.
3604 NOTE: it's still possible for any application or module to have it's
3605 own set of error texts inserted. The routines are there, just not
3606 used by default when no-err is given.
3609 *) Add support for FreeBSD on IA64.
3610 [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
3612 *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
3613 Kerberos function mit_des_cbc_cksum(). Before this change,
3614 the value returned by DES_cbc_cksum() was like the one from
3615 mit_des_cbc_cksum(), except the bytes were swapped.
3616 [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
3618 *) Allow an application to disable the automatic SSL chain building.
3619 Before this a rather primitive chain build was always performed in
3620 ssl3_output_cert_chain(): an application had no way to send the
3621 correct chain if the automatic operation produced an incorrect result.
3623 Now the chain builder is disabled if either:
3625 1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
3627 2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
3629 The reasoning behind this is that an application would not want the
3630 auto chain building to take place if extra chain certificates are
3631 present and it might also want a means of sending no additional
3632 certificates (for example the chain has two certificates and the
3636 *) Add the possibility to build without the ENGINE framework.
3637 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
3639 *) Under Win32 gmtime() can return NULL: check return value in
3640 OPENSSL_gmtime(). Add error code for case where gmtime() fails.
3643 *) DSA routines: under certain error conditions uninitialized BN objects
3644 could be freed. Solution: make sure initialization is performed early
3645 enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
3646 Nils Larsch <nla@trustcenter.de> via PR#459)
3649 *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
3650 checked on reconnect on the client side, therefore session resumption
3651 could still fail with a "ssl session id is different" error. This
3652 behaviour is masked when SSL_OP_ALL is used due to
3653 SSL_OP_MICROSOFT_SESS_ID_BUG being set.
3654 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
3655 followup to PR #377.
3658 *) IA-32 assembler support enhancements: unified ELF targets, support
3659 for SCO/Caldera platforms, fix for Cygwin shared build.
3662 *) Add support for FreeBSD on sparc64. As a consequence, support for
3663 FreeBSD on non-x86 processors is separate from x86 processors on
3664 the config script, much like the NetBSD support.
3665 [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
3667 Changes between 0.9.6h and 0.9.7 [31 Dec 2002]
3669 [NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
3672 *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
3673 code (06) was taken as the first octet of the session ID and the last
3674 octet was ignored consequently. As a result SSLv2 client side session
3675 caching could not have worked due to the session ID mismatch between
3677 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
3681 *) Change the declaration of needed Kerberos libraries to use EX_LIBS
3682 instead of the special (and badly supported) LIBKRB5. LIBKRB5 is
3686 *) The hw_ncipher.c engine requires dynamic locks. Unfortunately, it
3687 seems that in spite of existing for more than a year, many application
3688 author have done nothing to provide the necessary callbacks, which
3689 means that this particular engine will not work properly anywhere.
3690 This is a very unfortunate situation which forces us, in the name
3691 of usability, to give the hw_ncipher.c a static lock, which is part
3693 NOTE: This is for the 0.9.7 series ONLY. This hack will never
3694 appear in 0.9.8 or later. We EXPECT application authors to have
3695 dealt properly with this when 0.9.8 is released (unless we actually
3696 make such changes in the libcrypto locking code that changes will
3697 have to be made anyway).
3700 *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
3701 octets have been read, EOF or an error occurs. Without this change
3702 some truncated ASN1 structures will not produce an error.
3705 *) Disable Heimdal support, since it hasn't been fully implemented.
3706 Still give the possibility to force the use of Heimdal, but with
3707 warnings and a request that patches get sent to openssl-dev.
3710 *) Add the VC-CE target, introduce the WINCE sysname, and add
3711 INSTALL.WCE and appropriate conditionals to make it build.
3712 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
3714 *) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
3715 cygssl-x.y.z.dll, where x, y and z are the major, minor and
3716 edit numbers of the version.
3717 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
3719 *) Introduce safe string copy and catenation functions
3720 (BUF_strlcpy() and BUF_strlcat()).
3721 [Ben Laurie (CHATS) and Richard Levitte]
3723 *) Avoid using fixed-size buffers for one-line DNs.
3724 [Ben Laurie (CHATS)]
3726 *) Add BUF_MEM_grow_clean() to avoid information leakage when
3727 resizing buffers containing secrets, and use where appropriate.
3728 [Ben Laurie (CHATS)]
3730 *) Avoid using fixed size buffers for configuration file location.
3731 [Ben Laurie (CHATS)]
3733 *) Avoid filename truncation for various CA files.
3734 [Ben Laurie (CHATS)]
3736 *) Use sizeof in preference to magic numbers.
3737 [Ben Laurie (CHATS)]
3739 *) Avoid filename truncation in cert requests.
3740 [Ben Laurie (CHATS)]
3742 *) Add assertions to check for (supposedly impossible) buffer
3744 [Ben Laurie (CHATS)]
3746 *) Don't cache truncated DNS entries in the local cache (this could
3747 potentially lead to a spoofing attack).
3748 [Ben Laurie (CHATS)]
3750 *) Fix various buffers to be large enough for hex/decimal
3751 representations in a platform independent manner.
3752 [Ben Laurie (CHATS)]
3754 *) Add CRYPTO_realloc_clean() to avoid information leakage when
3755 resizing buffers containing secrets, and use where appropriate.
3756 [Ben Laurie (CHATS)]
3758 *) Add BIO_indent() to avoid much slightly worrying code to do
3760 [Ben Laurie (CHATS)]
3762 *) Convert sprintf()/BIO_puts() to BIO_printf().
3763 [Ben Laurie (CHATS)]
3765 *) buffer_gets() could terminate with the buffer only half
3767 [Ben Laurie (CHATS)]
3769 *) Add assertions to prevent user-supplied crypto functions from
3770 overflowing internal buffers by having large block sizes, etc.
3771 [Ben Laurie (CHATS)]
3773 *) New OPENSSL_assert() macro (similar to assert(), but enabled
3775 [Ben Laurie (CHATS)]
3777 *) Eliminate unused copy of key in RC4.
3778 [Ben Laurie (CHATS)]
3780 *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
3781 [Ben Laurie (CHATS)]
3783 *) Fix off-by-one error in EGD path.
3784 [Ben Laurie (CHATS)]
3786 *) If RANDFILE path is too long, ignore instead of truncating.
3787 [Ben Laurie (CHATS)]
3789 *) Eliminate unused and incorrectly sized X.509 structure
3791 [Ben Laurie (CHATS)]
3793 *) Eliminate unused and dangerous function knumber().
3794 [Ben Laurie (CHATS)]
3796 *) Eliminate unused and dangerous structure, KSSL_ERR.
3797 [Ben Laurie (CHATS)]
3799 *) Protect against overlong session ID context length in an encoded
3800 session object. Since these are local, this does not appear to be
3802 [Ben Laurie (CHATS)]
3804 *) Change from security patch (see 0.9.6e below) that did not affect
3805 the 0.9.6 release series:
3807 Remote buffer overflow in SSL3 protocol - an attacker could
3808 supply an oversized master key in Kerberos-enabled versions.
3810 [Ben Laurie (CHATS)]
3812 *) Change the SSL kerb5 codes to match RFC 2712.
3815 *) Make -nameopt work fully for req and add -reqopt switch.
3816 [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
3818 *) The "block size" for block ciphers in CFB and OFB mode should be 1.
3819 [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
3821 *) Make sure tests can be performed even if the corresponding algorithms
3822 have been removed entirely. This was also the last step to make
3823 OpenSSL compilable with DJGPP under all reasonable conditions.
3824 [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
3826 *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
3827 to allow version independent disabling of normally unselected ciphers,
3828 which may be activated as a side-effect of selecting a single cipher.
3830 (E.g., cipher list string "RSA" enables ciphersuites that are left
3831 out of "ALL" because they do not provide symmetric encryption.
3832 "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
3833 [Lutz Jaenicke, Bodo Moeller]
3835 *) Add appropriate support for separate platform-dependent build
3836 directories. The recommended way to make a platform-dependent
3837 build directory is the following (tested on Linux), maybe with
3840 # Place yourself outside of the OpenSSL source tree. In
3841 # this example, the environment variable OPENSSL_SOURCE
3842 # is assumed to contain the absolute OpenSSL source directory.
3843 mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
3844 cd objtree/"`uname -s`-`uname -r`-`uname -m`"
3845 (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
3846 mkdir -p `dirname $F`
3847 ln -s $OPENSSL_SOURCE/$F $F
3850 To be absolutely sure not to disturb the source tree, a "make clean"
3851 is a good thing. If it isn't successfull, don't worry about it,
3852 it probably means the source directory is very clean.
3855 *) Make sure any ENGINE control commands make local copies of string
3856 pointers passed to them whenever necessary. Otherwise it is possible
3857 the caller may have overwritten (or deallocated) the original string
3858 data when a later ENGINE operation tries to use the stored values.
3859 [Götz Babin-Ebell <babinebell@trustcenter.de>]
3861 *) Improve diagnostics in file reading and command-line digests.
3862 [Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
3864 *) Add AES modes CFB and OFB to the object database. Correct an
3865 error in AES-CFB decryption.
3868 *) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
3869 allows existing EVP_CIPHER_CTX structures to be reused after
3870 calling EVP_*Final(). This behaviour is used by encryption
3871 BIOs and some applications. This has the side effect that
3872 applications must explicitly clean up cipher contexts with
3873 EVP_CIPHER_CTX_cleanup() or they will leak memory.
3876 *) Check the values of dna and dnb in bn_mul_recursive before calling
3877 bn_mul_comba (a non zero value means the a or b arrays do not contain
3878 n2 elements) and fallback to bn_mul_normal if either is not zero.
3881 *) Fix escaping of non-ASCII characters when using the -subj option
3882 of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
3885 *) Make object definitions compliant to LDAP (RFC2256): SN is the short
3886 form for "surname", serialNumber has no short form.
3887 Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
3888 therefore remove "mail" short name for "internet 7".
3889 The OID for unique identifiers in X509 certificates is
3890 x500UniqueIdentifier, not uniqueIdentifier.
3891 Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
3894 *) Add an "init" command to the ENGINE config module and auto initialize
3895 ENGINEs. Without any "init" command the ENGINE will be initialized
3896 after all ctrl commands have been executed on it. If init=1 the
3897 ENGINE is initailized at that point (ctrls before that point are run
3898 on the uninitialized ENGINE and after on the initialized one). If
3899 init=0 then the ENGINE will not be iniatialized at all.
3902 *) Fix the 'app_verify_callback' interface so that the user-defined
3903 argument is actually passed to the callback: In the
3904 SSL_CTX_set_cert_verify_callback() prototype, the callback
3905 declaration has been changed from
3908 int (*cb)(X509_STORE_CTX *,void *);
3909 in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
3910 i=s->ctx->app_verify_callback(&ctx)
3911 has been changed into
3912 i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
3914 To update applications using SSL_CTX_set_cert_verify_callback(),
3915 a dummy argument can be added to their callback functions.
3916 [D. K. Smetters <smetters@parc.xerox.com>]
3918 *) Added the '4758cca' ENGINE to support IBM 4758 cards.
3919 [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
3921 *) Add and OPENSSL_LOAD_CONF define which will cause
3922 OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
3923 This allows older applications to transparently support certain
3924 OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
3925 Two new functions OPENSSL_add_all_algorithms_noconf() which will never
3926 load the config file and OPENSSL_add_all_algorithms_conf() which will
3927 always load it have also been added.
3930 *) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
3931 Adjust NIDs and EVP layer.
3932 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
3934 *) Config modules support in openssl utility.
3936 Most commands now load modules from the config file,
3937 though in a few (such as version) this isn't done
3938 because it couldn't be used for anything.
3940 In the case of ca and req the config file used is
3941 the same as the utility itself: that is the -config
3942 command line option can be used to specify an
3946 *) Move default behaviour from OPENSSL_config(). If appname is NULL
3947 use "openssl_conf" if filename is NULL use default openssl config file.
3950 *) Add an argument to OPENSSL_config() to allow the use of an alternative
3951 config section name. Add a new flag to tolerate a missing config file
3952 and move code to CONF_modules_load_file().
3955 *) Support for crypto accelerator cards from Accelerated Encryption
3956 Processing, www.aep.ie. (Use engine 'aep')
3957 The support was copied from 0.9.6c [engine] and adapted/corrected
3958 to work with the new engine framework.
3959 [AEP Inc. and Richard Levitte]
3961 *) Support for SureWare crypto accelerator cards from Baltimore
3962 Technologies. (Use engine 'sureware')
3963 The support was copied from 0.9.6c [engine] and adapted
3964 to work with the new engine framework.
3967 *) Have the CHIL engine fork-safe (as defined by nCipher) and actually
3968 make the newer ENGINE framework commands for the CHIL engine work.
3969 [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
3971 *) Make it possible to produce shared libraries on ReliantUNIX.
3972 [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
3974 *) Add the configuration target debug-linux-ppro.
3975 Make 'openssl rsa' use the general key loading routines
3976 implemented in apps.c, and make those routines able to
3977 handle the key format FORMAT_NETSCAPE and the variant
3979 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
3981 *) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
3982 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
3984 *) Add -keyform to rsautl, and document -engine.
3985 [Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
3987 *) Change BIO_new_file (crypto/bio/bss_file.c) to use new
3988 BIO_R_NO_SUCH_FILE error code rather than the generic
3989 ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
3992 *) Add new functions
3994 ERR_peek_last_error_line
3995 ERR_peek_last_error_line_data.
3996 These are similar to
3999 ERR_peek_error_line_data,
4000 but report on the latest error recorded rather than the first one
4001 still in the error queue.
4002 [Ben Laurie, Bodo Moeller]
4004 *) default_algorithms option in ENGINE config module. This allows things
4006 default_algorithms = ALL
4007 default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
4010 *) Prelminary ENGINE config module.
4013 *) New experimental application configuration code.
4016 *) Change the AES code to follow the same name structure as all other
4017 symmetric ciphers, and behave the same way. Move everything to
4018 the directory crypto/aes, thereby obsoleting crypto/rijndael.
4019 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
4021 *) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
4022 [Ben Laurie and Theo de Raadt]
4024 *) Add option to output public keys in req command.
4025 [Massimiliano Pala madwolf@openca.org]
4027 *) Use wNAFs in EC_POINTs_mul() for improved efficiency
4028 (up to about 10% better than before for P-192 and P-224).
4031 *) New functions/macros
4033 SSL_CTX_set_msg_callback(ctx, cb)
4034 SSL_CTX_set_msg_callback_arg(ctx, arg)
4035 SSL_set_msg_callback(ssl, cb)
4036 SSL_set_msg_callback_arg(ssl, arg)
4038 to request calling a callback function
4040 void cb(int write_p, int version, int content_type,
4041 const void *buf, size_t len, SSL *ssl, void *arg)
4043 whenever a protocol message has been completely received
4044 (write_p == 0) or sent (write_p == 1). Here 'version' is the
4045 protocol version according to which the SSL library interprets
4046 the current protocol message (SSL2_VERSION, SSL3_VERSION, or
4047 TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
4048 the content type as defined in the SSL 3.0/TLS 1.0 protocol
4049 specification (change_cipher_spec(20), alert(21), handshake(22)).
4050 'buf' and 'len' point to the actual message, 'ssl' to the
4051 SSL object, and 'arg' is the application-defined value set by
4052 SSL[_CTX]_set_msg_callback_arg().
4054 'openssl s_client' and 'openssl s_server' have new '-msg' options
4055 to enable a callback that displays all protocol messages.
4058 *) Change the shared library support so shared libraries are built as
4059 soon as the corresponding static library is finished, and thereby get
4060 openssl and the test programs linked against the shared library.
4061 This still only happens when the keyword "shard" has been given to
4062 the configuration scripts.
4064 NOTE: shared library support is still an experimental thing, and
4065 backward binary compatibility is still not guaranteed.
4066 ["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
4068 *) Add support for Subject Information Access extension.
4069 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
4071 *) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
4072 additional bytes when new memory had to be allocated, not just
4073 when reusing an existing buffer.
4076 *) New command line and configuration option 'utf8' for the req command.
4077 This allows field values to be specified as UTF8 strings.
4080 *) Add -multi and -mr options to "openssl speed" - giving multiple parallel
4081 runs for the former and machine-readable output for the latter.
4084 *) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
4085 of the e-mail address in the DN (i.e., it will go into a certificate
4086 extension only). The new configuration file option 'email_in_dn = no'
4087 has the same effect.
4088 [Massimiliano Pala madwolf@openca.org]
4090 *) Change all functions with names starting with des_ to be starting
4091 with DES_ instead. Add wrappers that are compatible with libdes,
4092 but are named _ossl_old_des_*. Finally, add macros that map the
4093 des_* symbols to the corresponding _ossl_old_des_* if libdes
4094 compatibility is desired. If OpenSSL 0.9.6c compatibility is
4095 desired, the des_* symbols will be mapped to DES_*, with one
4098 Since we provide two compatibility mappings, the user needs to
4099 define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
4100 compatibility is desired. The default (i.e., when that macro
4101 isn't defined) is OpenSSL 0.9.6c compatibility.
4103 There are also macros that enable and disable the support of old
4104 des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
4105 and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
4106 are defined, the default will apply: to support the old des routines.
4108 In either case, one must include openssl/des.h to get the correct
4109 definitions. Do not try to just include openssl/des_old.h, that
4112 NOTE: This is a major break of an old API into a new one. Software
4113 authors are encouraged to switch to the DES_ style functions. Some
4114 time in the future, des_old.h and the libdes compatibility functions
4115 will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
4116 default), and then completely removed.
4119 *) Test for certificates which contain unsupported critical extensions.
4120 If such a certificate is found during a verify operation it is
4121 rejected by default: this behaviour can be overridden by either
4122 handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
4123 by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
4124 X509_supported_extension() has also been added which returns 1 if a
4125 particular extension is supported.
4128 *) Modify the behaviour of EVP cipher functions in similar way to digests
4129 to retain compatibility with existing code.
4132 *) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
4133 compatibility with existing code. In particular the 'ctx' parameter does
4134 not have to be to be initialized before the call to EVP_DigestInit() and
4135 it is tidied up after a call to EVP_DigestFinal(). New function
4136 EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
4137 EVP_MD_CTX_copy() changed to not require the destination to be
4138 initialized valid and new function EVP_MD_CTX_copy_ex() added which
4139 requires the destination to be valid.
4141 Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
4142 EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
4145 *) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
4146 so that complete 'Handshake' protocol structures are kept in memory
4147 instead of overwriting 'msg_type' and 'length' with 'body' data.
4150 *) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
4151 [Massimo Santin via Richard Levitte]
4153 *) Major restructuring to the underlying ENGINE code. This includes
4154 reduction of linker bloat, separation of pure "ENGINE" manipulation
4155 (initialisation, etc) from functionality dealing with implementations
4156 of specific crypto iterfaces. This change also introduces integrated
4157 support for symmetric ciphers and digest implementations - so ENGINEs
4158 can now accelerate these by providing EVP_CIPHER and EVP_MD
4159 implementations of their own. This is detailed in crypto/engine/README
4160 as it couldn't be adequately described here. However, there are a few
4161 API changes worth noting - some RSA, DSA, DH, and RAND functions that
4162 were changed in the original introduction of ENGINE code have now
4163 reverted back - the hooking from this code to ENGINE is now a good
4164 deal more passive and at run-time, operations deal directly with
4165 RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
4166 dereferencing through an ENGINE pointer any more. Also, the ENGINE
4167 functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
4168 they were not being used by the framework as there is no concept of a
4169 BIGNUM_METHOD and they could not be generalised to the new
4170 'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
4171 ENGINE_cpy() has been removed as it cannot be consistently defined in
4175 *) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
4178 *) Change mkdef.pl to sort symbols that get the same entry number,
4179 and make sure the automatically generated functions ERR_load_*
4180 become part of libeay.num as well.
4183 *) New function SSL_renegotiate_pending(). This returns true once
4184 renegotiation has been requested (either SSL_renegotiate() call
4185 or HelloRequest/ClientHello receveived from the peer) and becomes
4186 false once a handshake has been completed.
4187 (For servers, SSL_renegotiate() followed by SSL_do_handshake()
4188 sends a HelloRequest, but does not ensure that a handshake takes
4189 place. SSL_renegotiate_pending() is useful for checking if the
4190 client has followed the request.)
4193 *) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
4194 By default, clients may request session resumption even during
4195 renegotiation (if session ID contexts permit); with this option,
4196 session resumption is possible only in the first handshake.
4198 SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
4199 more bits available for options that should not be part of
4200 SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
4203 *) Add some demos for certificate and certificate request creation.
4206 *) Make maximum certificate chain size accepted from the peer application
4207 settable (SSL*_get/set_max_cert_list()), as proposed by
4208 "Douglas E. Engert" <deengert@anl.gov>.
4211 *) Add support for shared libraries for Unixware-7
4212 (Boyd Lynn Gerber <gerberb@zenez.com>).
4215 *) Add a "destroy" handler to ENGINEs that allows structural cleanup to
4216 be done prior to destruction. Use this to unload error strings from
4217 ENGINEs that load their own error strings. NB: This adds two new API
4218 functions to "get" and "set" this destroy handler in an ENGINE.
4221 *) Alter all existing ENGINE implementations (except "openssl" and
4222 "openbsd") to dynamically instantiate their own error strings. This
4223 makes them more flexible to be built both as statically-linked ENGINEs
4224 and self-contained shared-libraries loadable via the "dynamic" ENGINE.
4225 Also, add stub code to each that makes building them as self-contained
4226 shared-libraries easier (see README.ENGINE).
4229 *) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
4230 implementations into applications that are completely implemented in
4231 self-contained shared-libraries. The "dynamic" ENGINE exposes control
4232 commands that can be used to configure what shared-library to load and
4233 to control aspects of the way it is handled. Also, made an update to
4234 the README.ENGINE file that brings its information up-to-date and
4235 provides some information and instructions on the "dynamic" ENGINE
4236 (ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
4239 *) Make it possible to unload ranges of ERR strings with a new
4240 "ERR_unload_strings" function.
4243 *) Add a copy() function to EVP_MD.
4246 *) Make EVP_MD routines take a context pointer instead of just the
4247 md_data void pointer.
4250 *) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
4251 that the digest can only process a single chunk of data
4252 (typically because it is provided by a piece of
4253 hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
4254 is only going to provide a single chunk of data, and hence the
4255 framework needn't accumulate the data for oneshot drivers.
4258 *) As with "ERR", make it possible to replace the underlying "ex_data"
4259 functions. This change also alters the storage and management of global
4260 ex_data state - it's now all inside ex_data.c and all "class" code (eg.
4261 RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
4262 index counters. The API functions that use this state have been changed
4263 to take a "class_index" rather than pointers to the class's local STACK
4264 and counter, and there is now an API function to dynamically create new
4265 classes. This centralisation allows us to (a) plug a lot of the
4266 thread-safety problems that existed, and (b) makes it possible to clean
4267 up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
4268 such data would previously have always leaked in application code and
4269 workarounds were in place to make the memory debugging turn a blind eye
4270 to it. Application code that doesn't use this new function will still
4271 leak as before, but their memory debugging output will announce it now
4272 rather than letting it slide.
4274 Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
4275 induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
4276 has a return value to indicate success or failure.
4279 *) Make it possible to replace the underlying "ERR" functions such that the
4280 global state (2 LHASH tables and 2 locks) is only used by the "default"
4281 implementation. This change also adds two functions to "get" and "set"
4282 the implementation prior to it being automatically set the first time
4283 any other ERR function takes place. Ie. an application can call "get",
4284 pass the return value to a module it has just loaded, and that module
4285 can call its own "set" function using that value. This means the
4286 module's "ERR" operations will use (and modify) the error state in the
4287 application and not in its own statically linked copy of OpenSSL code.
4290 *) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
4291 reference counts. This performs normal REF_PRINT/REF_CHECK macros on
4292 the operation, and provides a more encapsulated way for external code
4293 (crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
4294 to use these functions rather than manually incrementing the counts.
4296 Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
4299 *) Add EVP test program.
4302 *) Add symmetric cipher support to ENGINE. Expect the API to change!
4305 *) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
4306 X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
4307 X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
4308 These allow a CRL to be built without having to access X509_CRL fields
4309 directly. Modify 'ca' application to use new functions.
4312 *) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
4313 bug workarounds. Rollback attack detection is a security feature.
4314 The problem will only arise on OpenSSL servers when TLSv1 is not
4315 available (sslv3_server_method() or SSL_OP_NO_TLSv1).
4316 Software authors not wanting to support TLSv1 will have special reasons
4317 for their choice and can explicitly enable this option.
4318 [Bodo Moeller, Lutz Jaenicke]
4320 *) Rationalise EVP so it can be extended: don't include a union of
4321 cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
4322 (similar to those existing for EVP_CIPHER_CTX).
4327 EVP_MD_CTX_init(&md); /* new function call */
4328 EVP_DigestInit(&md, EVP_sha1());
4329 EVP_DigestUpdate(&md, in, len);
4330 EVP_DigestFinal(&md, out, NULL);
4331 EVP_MD_CTX_cleanup(&md); /* new function call */
4335 *) Make DES key schedule conform to the usual scheme, as well as
4336 correcting its structure. This means that calls to DES functions
4337 now have to pass a pointer to a des_key_schedule instead of a
4338 plain des_key_schedule (which was actually always a pointer
4341 des_key_schedule ks;
4343 des_set_key_checked(..., &ks);
4344 des_ncbc_encrypt(..., &ks, ...);
4346 (Note that a later change renames 'des_...' into 'DES_...'.)
4349 *) Initial reduction of linker bloat: the use of some functions, such as
4350 PEM causes large amounts of unused functions to be linked in due to
4351 poor organisation. For example pem_all.c contains every PEM function
4352 which has a knock on effect of linking in large amounts of (unused)
4353 ASN1 code. Grouping together similar functions and splitting unrelated
4354 functions prevents this.
4357 *) Cleanup of EVP macros.
4360 *) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
4361 correct _ecb suffix.
4364 *) Add initial OCSP responder support to ocsp application. The
4365 revocation information is handled using the text based index
4366 use by the ca application. The responder can either handle
4367 requests generated internally, supplied in files (for example
4368 via a CGI script) or using an internal minimal server.
4371 *) Add configuration choices to get zlib compression for TLS.
4374 *) Changes to Kerberos SSL for RFC 2712 compliance:
4375 1. Implemented real KerberosWrapper, instead of just using
4376 KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
4377 2. Implemented optional authenticator field of KerberosWrapper.
4379 Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
4380 and authenticator structs; see crypto/krb5/.
4382 Generalized Kerberos calls to support multiple Kerberos libraries.
4383 [Vern Staats <staatsvr@asc.hpc.mil>,
4384 Jeffrey Altman <jaltman@columbia.edu>
4385 via Richard Levitte]
4387 *) Cause 'openssl speed' to use fully hard-coded DSA keys as it
4388 already does with RSA. testdsa.h now has 'priv_key/pub_key'
4389 values for each of the key sizes rather than having just
4390 parameters (and 'speed' generating keys each time).
4393 *) Speed up EVP routines.
4396 type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
4397 des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
4398 des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
4399 des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
4401 des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
4402 des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
4403 des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
4406 des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
4408 des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
4411 *) Added the OS2-EMX target.
4412 ["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
4414 *) Rewrite apps to use NCONF routines instead of the old CONF. New functions
4415 to support NCONF routines in extension code. New function CONF_set_nconf()
4416 to allow functions which take an NCONF to also handle the old LHASH
4417 structure: this means that the old CONF compatible routines can be
4418 retained (in particular wrt extensions) without having to duplicate the
4419 code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
4422 *) Enhance the general user interface with mechanisms for inner control
4423 and with possibilities to have yes/no kind of prompts.
4426 *) Change all calls to low level digest routines in the library and
4427 applications to use EVP. Add missing calls to HMAC_cleanup() and
4428 don't assume HMAC_CTX can be copied using memcpy().
4429 [Verdon Walker <VWalker@novell.com>, Steve Henson]
4431 *) Add the possibility to control engines through control names but with
4432 arbitrary arguments instead of just a string.
4433 Change the key loaders to take a UI_METHOD instead of a callback
4434 function pointer. NOTE: this breaks binary compatibility with earlier
4435 versions of OpenSSL [engine].
4436 Adapt the nCipher code for these new conditions and add a card insertion
4440 *) Enhance the general user interface with mechanisms to better support
4441 dialog box interfaces, application-defined prompts, the possibility
4442 to use defaults (for example default passwords from somewhere else)
4443 and interrupts/cancellations.
4446 *) Tidy up PKCS#12 attribute handling. Add support for the CSP name
4447 attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
4450 *) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
4451 tidy up some unnecessarily weird code in 'sk_new()').
4452 [Geoff, reported by Diego Tartara <dtartara@novamens.com>]
4454 *) Change the key loading routines for ENGINEs to use the same kind
4455 callback (pem_password_cb) as all other routines that need this
4459 *) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
4460 256 bit (=32 byte) keys. Of course seeding with more entropy bytes
4461 than this minimum value is recommended.
4464 *) New random seeder for OpenVMS, using the system process statistics
4465 that are easily reachable.
4468 *) Windows apparently can't transparently handle global
4469 variables defined in DLLs. Initialisations such as:
4471 const ASN1_ITEM *it = &ASN1_INTEGER_it;
4473 wont compile. This is used by the any applications that need to
4474 declare their own ASN1 modules. This was fixed by adding the option
4475 EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
4476 needed for static libraries under Win32.
4479 *) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
4480 setting of purpose and trust fields. New X509_STORE trust and
4481 purpose functions and tidy up setting in other SSL functions.
4484 *) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
4485 structure. These are inherited by X509_STORE_CTX when it is
4486 initialised. This allows various defaults to be set in the
4487 X509_STORE structure (such as flags for CRL checking and custom
4488 purpose or trust settings) for functions which only use X509_STORE_CTX
4489 internally such as S/MIME.
4491 Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
4492 trust settings if they are not set in X509_STORE. This allows X509_STORE
4493 purposes and trust (in S/MIME for example) to override any set by default.
4495 Add command line options for CRL checking to smime, s_client and s_server
4499 *) Initial CRL based revocation checking. If the CRL checking flag(s)
4500 are set then the CRL is looked up in the X509_STORE structure and
4501 its validity and signature checked, then if the certificate is found
4502 in the CRL the verify fails with a revoked error.
4504 Various new CRL related callbacks added to X509_STORE_CTX structure.
4506 Command line options added to 'verify' application to support this.
4508 This needs some additional work, such as being able to handle multiple
4509 CRLs with different times, extension based lookup (rather than just
4510 by subject name) and ultimately more complete V2 CRL extension
4514 *) Add a general user interface API (crypto/ui/). This is designed
4515 to replace things like des_read_password and friends (backward
4516 compatibility functions using this new API are provided).
4517 The purpose is to remove prompting functions from the DES code
4518 section as well as provide for prompting through dialog boxes in
4519 a window system and the like.
4522 *) Add "ex_data" support to ENGINE so implementations can add state at a
4523 per-structure level rather than having to store it globally.
4526 *) Make it possible for ENGINE structures to be copied when retrieved by
4527 ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
4528 This causes the "original" ENGINE structure to act like a template,
4529 analogous to the RSA vs. RSA_METHOD type of separation. Because of this
4530 operational state can be localised to each ENGINE structure, despite the
4531 fact they all share the same "methods". New ENGINE structures returned in
4532 this case have no functional references and the return value is the single
4533 structural reference. This matches the single structural reference returned
4534 by ENGINE_by_id() normally, when it is incremented on the pre-existing
4538 *) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
4539 needs to match any other type at all we need to manually clear the
4543 *) Changes to the "openssl engine" utility to include;
4544 - verbosity levels ('-v', '-vv', and '-vvv') that provide information
4545 about an ENGINE's available control commands.
4546 - executing control commands from command line arguments using the
4547 '-pre' and '-post' switches. '-post' is only used if '-t' is
4548 specified and the ENGINE is successfully initialised. The syntax for
4549 the individual commands are colon-separated, for example;
4550 openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
4553 *) New dynamic control command support for ENGINEs. ENGINEs can now
4554 declare their own commands (numbers), names (strings), descriptions,
4555 and input types for run-time discovery by calling applications. A
4556 subset of these commands are implicitly classed as "executable"
4557 depending on their input type, and only these can be invoked through
4558 the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
4559 can be based on user input, config files, etc). The distinction is
4560 that "executable" commands cannot return anything other than a boolean
4561 result and can only support numeric or string input, whereas some
4562 discoverable commands may only be for direct use through
4563 ENGINE_ctrl(), eg. supporting the exchange of binary data, function
4564 pointers, or other custom uses. The "executable" commands are to
4565 support parameterisations of ENGINE behaviour that can be
4566 unambiguously defined by ENGINEs and used consistently across any
4567 OpenSSL-based application. Commands have been added to all the
4568 existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
4569 control over shared-library paths without source code alterations.
4572 *) Changed all ENGINE implementations to dynamically allocate their
4573 ENGINEs rather than declaring them statically. Apart from this being
4574 necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
4575 this also allows the implementations to compile without using the
4576 internal engine_int.h header.
4579 *) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
4580 'const' value. Any code that should be able to modify a RAND_METHOD
4581 should already have non-const pointers to it (ie. they should only
4582 modify their own ones).
4585 *) Made a variety of little tweaks to the ENGINE code.
4586 - "atalla" and "ubsec" string definitions were moved from header files
4587 to C code. "nuron" string definitions were placed in variables
4588 rather than hard-coded - allowing parameterisation of these values
4589 later on via ctrl() commands.
4590 - Removed unused "#if 0"'d code.
4591 - Fixed engine list iteration code so it uses ENGINE_free() to release
4592 structural references.
4593 - Constified the RAND_METHOD element of ENGINE structures.
4594 - Constified various get/set functions as appropriate and added
4595 missing functions (including a catch-all ENGINE_cpy that duplicates
4596 all ENGINE values onto a new ENGINE except reference counts/state).
4597 - Removed NULL parameter checks in get/set functions. Setting a method
4598 or function to NULL is a way of cancelling out a previously set
4599 value. Passing a NULL ENGINE parameter is just plain stupid anyway
4600 and doesn't justify the extra error symbols and code.
4601 - Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
4602 flags from engine_int.h to engine.h.
4603 - Changed prototypes for ENGINE handler functions (init(), finish(),
4604 ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
4607 *) Implement binary inversion algorithm for BN_mod_inverse in addition
4608 to the algorithm using long division. The binary algorithm can be
4609 used only if the modulus is odd. On 32-bit systems, it is faster
4610 only for relatively small moduli (roughly 20-30% for 128-bit moduli,
4611 roughly 5-15% for 256-bit moduli), so we use it only for moduli
4612 up to 450 bits. In 64-bit environments, the binary algorithm
4613 appears to be advantageous for much longer moduli; here we use it
4614 for moduli up to 2048 bits.
4617 *) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
4618 could not support the combine flag in choice fields.
4621 *) Add a 'copy_extensions' option to the 'ca' utility. This copies
4622 extensions from a certificate request to the certificate.
4625 *) Allow multiple 'certopt' and 'nameopt' options to be separated
4626 by commas. Add 'namopt' and 'certopt' options to the 'ca' config
4627 file: this allows the display of the certificate about to be
4628 signed to be customised, to allow certain fields to be included
4629 or excluded and extension details. The old system didn't display
4630 multicharacter strings properly, omitted fields not in the policy
4631 and couldn't display additional details such as extensions.
4634 *) Function EC_POINTs_mul for multiple scalar multiplication
4635 of an arbitrary number of elliptic curve points
4636 \sum scalars[i]*points[i],
4637 optionally including the generator defined for the EC_GROUP:
4638 scalar*generator + \sum scalars[i]*points[i].
4640 EC_POINT_mul is a simple wrapper function for the typical case
4641 that the point list has just one item (besides the optional
4645 *) First EC_METHODs for curves over GF(p):
4647 EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
4648 operations and provides various method functions that can also
4649 operate with faster implementations of modular arithmetic.
4651 EC_GFp_mont_method() reuses most functions that are part of
4652 EC_GFp_simple_method, but uses Montgomery arithmetic.
4654 [Bodo Moeller; point addition and point doubling
4655 implementation directly derived from source code provided by
4656 Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
4658 *) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
4659 crypto/ec/ec_lib.c):
4661 Curves are EC_GROUP objects (with an optional group generator)
4662 based on EC_METHODs that are built into the library.
4664 Points are EC_POINT objects based on EC_GROUP objects.
4666 Most of the framework would be able to handle curves over arbitrary
4667 finite fields, but as there are no obvious types for fields other
4668 than GF(p), some functions are limited to that for now.
4671 *) Add the -HTTP option to s_server. It is similar to -WWW, but requires
4672 that the file contains a complete HTTP response.
4675 *) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
4676 change the def and num file printf format specifier from "%-40sXXX"
4677 to "%-39s XXX". The latter will always guarantee a space after the
4678 field while the former will cause them to run together if the field
4679 is 40 of more characters long.
4682 *) Constify the cipher and digest 'method' functions and structures
4683 and modify related functions to take constant EVP_MD and EVP_CIPHER
4687 *) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
4688 in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
4691 *) Modify EVP_Digest*() routines so they now return values. Although the
4692 internal software routines can never fail additional hardware versions
4696 *) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
4698 Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
4699 (= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
4702 ERR_R_NESTED_ASN1_ERROR
4704 ERR_R_MISSING_ASN1_EOS
4705 were 4 .. 9, conflicting with
4706 ERR_LIB_RSA (= ERR_R_RSA_LIB)
4708 ERR_LIB_PEM (= ERR_R_PEM_LIB).
4709 They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
4711 Add new error code 'ERR_R_INTERNAL_ERROR'.
4714 *) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
4718 *) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
4719 sets the subject name for a new request or supersedes the
4720 subject name in a given request. Formats that can be parsed are
4721 'CN=Some Name, OU=myOU, C=IT'
4723 'CN=Some Name/OU=myOU/C=IT'.
4725 Add options '-batch' and '-verbose' to 'openssl req'.
4726 [Massimiliano Pala <madwolf@hackmasters.net>]
4728 *) Introduce the possibility to access global variables through
4729 functions on platform were that's the best way to handle exporting
4730 global variables in shared libraries. To enable this functionality,
4731 one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
4732 "OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
4733 is normally done by Configure or something similar).
4735 To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
4736 in the source file (foo.c) like this:
4738 OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
4739 OPENSSL_IMPLEMENT_GLOBAL(double,bar);
4741 To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
4742 and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
4744 OPENSSL_DECLARE_GLOBAL(int,foo);
4745 #define foo OPENSSL_GLOBAL_REF(foo)
4746 OPENSSL_DECLARE_GLOBAL(double,bar);
4747 #define bar OPENSSL_GLOBAL_REF(bar)
4749 The #defines are very important, and therefore so is including the
4750 header file everywhere where the defined globals are used.
4752 The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
4753 of ASN.1 items, but that structure is a bit different.
4755 The largest change is in util/mkdef.pl which has been enhanced with
4756 better and easier to understand logic to choose which symbols should
4757 go into the Windows .def files as well as a number of fixes and code
4758 cleanup (among others, algorithm keywords are now sorted
4759 lexicographically to avoid constant rewrites).
4762 *) In BN_div() keep a copy of the sign of 'num' before writing the
4763 result to 'rm' because if rm==num the value will be overwritten
4764 and produce the wrong result if 'num' is negative: this caused
4765 problems with BN_mod() and BN_nnmod().
4768 *) Function OCSP_request_verify(). This checks the signature on an
4769 OCSP request and verifies the signer certificate. The signer
4770 certificate is just checked for a generic purpose and OCSP request
4774 *) Add OCSP_check_validity() function to check the validity of OCSP
4775 responses. OCSP responses are prepared in real time and may only
4776 be a few seconds old. Simply checking that the current time lies
4777 between thisUpdate and nextUpdate max reject otherwise valid responses
4778 caused by either OCSP responder or client clock inaccuracy. Instead
4779 we allow thisUpdate and nextUpdate to fall within a certain period of
4780 the current time. The age of the response can also optionally be
4781 checked. Two new options -validity_period and -status_age added to
4785 *) If signature or public key algorithm is unrecognized print out its
4786 OID rather that just UNKNOWN.
4789 *) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
4790 OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
4791 ID to be generated from the issuer certificate alone which can then be
4792 passed to OCSP_id_issuer_cmp().
4795 *) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
4796 ASN1 modules to export functions returning ASN1_ITEM pointers
4797 instead of the ASN1_ITEM structures themselves. This adds several
4798 new macros which allow the underlying ASN1 function/structure to
4799 be accessed transparently. As a result code should not use ASN1_ITEM
4800 references directly (such as &X509_it) but instead use the relevant
4801 macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
4802 use of the new ASN1 code on platforms where exporting structures
4803 is problematical (for example in shared libraries) but exporting
4804 functions returning pointers to structures is not.
4807 *) Add support for overriding the generation of SSL/TLS session IDs.
4808 These callbacks can be registered either in an SSL_CTX or per SSL.
4809 The purpose of this is to allow applications to control, if they wish,
4810 the arbitrary values chosen for use as session IDs, particularly as it
4811 can be useful for session caching in multiple-server environments. A
4812 command-line switch for testing this (and any client code that wishes
4813 to use such a feature) has been added to "s_server".
4814 [Geoff Thorpe, Lutz Jaenicke]
4816 *) Modify mkdef.pl to recognise and parse preprocessor conditionals
4817 of the form '#if defined(...) || defined(...) || ...' and
4818 '#if !defined(...) && !defined(...) && ...'. This also avoids
4819 the growing number of special cases it was previously handling.
4822 *) Make all configuration macros available for application by making
4823 sure they are available in opensslconf.h, by giving them names starting
4824 with "OPENSSL_" to avoid conflicts with other packages and by making
4825 sure e_os2.h will cover all platform-specific cases together with
4827 Additionally, it is now possible to define configuration/platform-
4828 specific names (called "system identities"). In the C code, these
4829 are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
4830 macro with the name beginning with "OPENSSL_SYS_", which is determined
4831 from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
4835 *) New option -set_serial to 'req' and 'x509' this allows the serial
4836 number to use to be specified on the command line. Previously self
4837 signed certificates were hard coded with serial number 0 and the
4838 CA options of 'x509' had to use a serial number in a file which was
4842 *) New options to 'ca' utility to support V2 CRL entry extensions.
4843 Currently CRL reason, invalidity date and hold instruction are
4844 supported. Add new CRL extensions to V3 code and some new objects.
4847 *) New function EVP_CIPHER_CTX_set_padding() this is used to
4848 disable standard block padding (aka PKCS#5 padding) in the EVP
4849 API, which was previously mandatory. This means that the data is
4850 not padded in any way and so the total length much be a multiple
4851 of the block size, otherwise an error occurs.
4854 *) Initial (incomplete) OCSP SSL support.
4857 *) New function OCSP_parse_url(). This splits up a URL into its host,
4858 port and path components: primarily to parse OCSP URLs. New -url
4859 option to ocsp utility.
4862 *) New nonce behavior. The return value of OCSP_check_nonce() now
4863 reflects the various checks performed. Applications can decide
4864 whether to tolerate certain situations such as an absent nonce
4865 in a response when one was present in a request: the ocsp application
4866 just prints out a warning. New function OCSP_add1_basic_nonce()
4867 this is to allow responders to include a nonce in a response even if
4868 the request is nonce-less.
4871 *) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
4872 skipped when using openssl x509 multiple times on a single input file,
4873 e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
4876 *) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
4877 set string type: to handle setting ASN1_TIME structures. Fix ca
4878 utility to correctly initialize revocation date of CRLs.
4881 *) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
4882 the clients preferred ciphersuites and rather use its own preferences.
4883 Should help to work around M$ SGC (Server Gated Cryptography) bug in
4884 Internet Explorer by ensuring unchanged hash method during stepup.
4885 (Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
4888 *) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
4889 to aes and add a new 'exist' option to print out symbols that don't
4893 *) Additional options to ocsp utility to allow flags to be set and
4894 additional certificates supplied.
4897 *) Add the option -VAfile to 'openssl ocsp', so the user can give the
4898 OCSP client a number of certificate to only verify the response
4902 *) Update Rijndael code to version 3.0 and change EVP AES ciphers to
4903 handle the new API. Currently only ECB, CBC modes supported. Add new
4906 Add TLS AES ciphersuites as described in RFC3268, "Advanced
4907 Encryption Standard (AES) Ciphersuites for Transport Layer
4908 Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
4909 not enabled by default and were not part of the "ALL" ciphersuite
4910 alias because they were not yet official; they could be
4911 explicitly requested by specifying the "AESdraft" ciphersuite
4912 group alias. In the final release of OpenSSL 0.9.7, the group
4913 alias is called "AES" and is part of "ALL".)
4914 [Ben Laurie, Steve Henson, Bodo Moeller]
4916 *) New function OCSP_copy_nonce() to copy nonce value (if present) from
4917 request to response.
4920 *) Functions for OCSP responders. OCSP_request_onereq_count(),
4921 OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
4922 extract information from a certificate request. OCSP_response_create()
4923 creates a response and optionally adds a basic response structure.
4924 OCSP_basic_add1_status() adds a complete single response to a basic
4925 response and returns the OCSP_SINGLERESP structure just added (to allow
4926 extensions to be included for example). OCSP_basic_add1_cert() adds a
4927 certificate to a basic response and OCSP_basic_sign() signs a basic
4928 response with various flags. New helper functions ASN1_TIME_check()
4929 (checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
4930 (converts ASN1_TIME to GeneralizedTime).
4933 *) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
4934 in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
4935 structure from a certificate. X509_pubkey_digest() digests the public_key
4936 contents: this is used in various key identifiers.
4939 *) Make sk_sort() tolerate a NULL argument.
4940 [Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
4942 *) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
4943 passed by the function are trusted implicitly. If any of them signed the
4944 response then it is assumed to be valid and is not verified.
4947 *) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
4948 to data. This was previously part of the PKCS7 ASN1 code. This
4949 was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
4950 [Steve Henson, reported by Kenneth R. Robinette
4951 <support@securenetterm.com>]
4953 *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
4954 routines: without these tracing memory leaks is very painful.
4955 Fix leaks in PKCS12 and PKCS7 routines.
4958 *) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
4959 Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
4960 effectively meant GeneralizedTime would never be used. Now it
4961 is initialised to -1 but X509_time_adj() now has to check the value
4962 and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
4963 V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
4964 [Steve Henson, reported by Kenneth R. Robinette
4965 <support@securenetterm.com>]
4967 *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
4968 result in a zero length in the ASN1_INTEGER structure which was
4969 not consistent with the structure when d2i_ASN1_INTEGER() was used
4970 and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
4971 to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
4972 where it did not print out a minus for negative ASN1_INTEGER.
4975 *) Add summary printout to ocsp utility. The various functions which
4976 convert status values to strings have been renamed to:
4977 OCSP_response_status_str(), OCSP_cert_status_str() and
4978 OCSP_crl_reason_str() and are no longer static. New options
4979 to verify nonce values and to disable verification. OCSP response
4980 printout format cleaned up.
4983 *) Add additional OCSP certificate checks. These are those specified
4984 in RFC2560. This consists of two separate checks: the CA of the
4985 certificate being checked must either be the OCSP signer certificate
4986 or the issuer of the OCSP signer certificate. In the latter case the
4987 OCSP signer certificate must contain the OCSP signing extended key
4988 usage. This check is performed by attempting to match the OCSP
4989 signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
4990 in the OCSP_CERTID structures of the response.
4993 *) Initial OCSP certificate verification added to OCSP_basic_verify()
4994 and related routines. This uses the standard OpenSSL certificate
4995 verify routines to perform initial checks (just CA validity) and
4996 to obtain the certificate chain. Then additional checks will be
4997 performed on the chain. Currently the root CA is checked to see
4998 if it is explicitly trusted for OCSP signing. This is used to set
4999 a root CA as a global signing root: that is any certificate that
5000 chains to that CA is an acceptable OCSP signing certificate.
5003 *) New '-extfile ...' option to 'openssl ca' for reading X.509v3
5004 extensions from a separate configuration file.
5005 As when reading extensions from the main configuration file,
5006 the '-extensions ...' option may be used for specifying the
5008 [Massimiliano Pala <madwolf@comune.modena.it>]
5010 *) New OCSP utility. Allows OCSP requests to be generated or
5011 read. The request can be sent to a responder and the output
5012 parsed, outputed or printed in text form. Not complete yet:
5013 still needs to check the OCSP response validity.
5016 *) New subcommands for 'openssl ca':
5017 'openssl ca -status <serial>' prints the status of the cert with
5018 the given serial number (according to the index file).
5019 'openssl ca -updatedb' updates the expiry status of certificates
5021 [Massimiliano Pala <madwolf@comune.modena.it>]
5023 *) New '-newreq-nodes' command option to CA.pl. This is like
5024 '-newreq', but calls 'openssl req' with the '-nodes' option
5025 so that the resulting key is not encrypted.
5026 [Damien Miller <djm@mindrot.org>]
5028 *) New configuration for the GNU Hurd.
5029 [Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
5031 *) Initial code to implement OCSP basic response verify. This
5032 is currently incomplete. Currently just finds the signer's
5033 certificate and verifies the signature on the response.
5036 *) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
5037 value of OPENSSLDIR. This is available via the new '-d' option
5038 to 'openssl version', and is also included in 'openssl version -a'.
5041 *) Allowing defining memory allocation callbacks that will be given
5042 file name and line number information in additional arguments
5043 (a const char* and an int). The basic functionality remains, as
5044 well as the original possibility to just replace malloc(),
5045 realloc() and free() by functions that do not know about these
5046 additional arguments. To register and find out the current
5047 settings for extended allocation functions, the following
5048 functions are provided:
5050 CRYPTO_set_mem_ex_functions
5051 CRYPTO_set_locked_mem_ex_functions
5052 CRYPTO_get_mem_ex_functions
5053 CRYPTO_get_locked_mem_ex_functions
5055 These work the same way as CRYPTO_set_mem_functions and friends.
5056 CRYPTO_get_[locked_]mem_functions now writes 0 where such an
5057 extended allocation function is enabled.
5058 Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
5059 a conventional allocation function is enabled.
5060 [Richard Levitte, Bodo Moeller]
5062 *) Finish off removing the remaining LHASH function pointer casts.
5063 There should no longer be any prototype-casting required when using
5064 the LHASH abstraction, and any casts that remain are "bugs". See
5065 the callback types and macros at the head of lhash.h for details
5066 (and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
5069 *) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
5070 If /dev/[u]random devices are not available or do not return enough
5071 entropy, EGD style sockets (served by EGD or PRNGD) will automatically
5073 The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
5074 /etc/entropy will be queried once each in this sequence, quering stops
5075 when enough entropy was collected without querying more sockets.
5078 *) Change the Unix RAND_poll() variant to be able to poll several
5079 random devices, as specified by DEVRANDOM, until a sufficient amount
5080 of data has been collected. We spend at most 10 ms on each file
5081 (select timeout) and read in non-blocking mode. DEVRANDOM now
5082 defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
5083 (previously it was just the string "/dev/urandom"), so on typical
5084 platforms the 10 ms delay will never occur.
5085 Also separate out the Unix variant to its own file, rand_unix.c.
5086 For VMS, there's a currently-empty rand_vms.c.
5089 *) Move OCSP client related routines to ocsp_cl.c. These
5090 provide utility functions which an application needing
5091 to issue a request to an OCSP responder and analyse the
5092 response will typically need: as opposed to those which an
5093 OCSP responder itself would need which will be added later.
5095 OCSP_request_sign() signs an OCSP request with an API similar
5096 to PKCS7_sign(). OCSP_response_status() returns status of OCSP
5097 response. OCSP_response_get1_basic() extracts basic response
5098 from response. OCSP_resp_find_status(): finds and extracts status
5099 information from an OCSP_CERTID structure (which will be created
5100 when the request structure is built). These are built from lower
5101 level functions which work on OCSP_SINGLERESP structures but
5102 wont normally be used unless the application wishes to examine
5103 extensions in the OCSP response for example.
5105 Replace nonce routines with a pair of functions.
5106 OCSP_request_add1_nonce() adds a nonce value and optionally
5107 generates a random value. OCSP_check_nonce() checks the
5108 validity of the nonce in an OCSP response.
5111 *) Change function OCSP_request_add() to OCSP_request_add0_id().
5112 This doesn't copy the supplied OCSP_CERTID and avoids the
5113 need to free up the newly created id. Change return type
5114 to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
5115 This can then be used to add extensions to the request.
5116 Deleted OCSP_request_new(), since most of its functionality
5117 is now in OCSP_REQUEST_new() (and the case insensitive name
5118 clash) apart from the ability to set the request name which
5119 will be added elsewhere.
5122 *) Update OCSP API. Remove obsolete extensions argument from
5123 various functions. Extensions are now handled using the new
5124 OCSP extension code. New simple OCSP HTTP function which
5125 can be used to send requests and parse the response.
5128 *) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
5129 ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
5130 uses the special reorder version of SET OF to sort the attributes
5131 and reorder them to match the encoded order. This resolves a long
5132 standing problem: a verify on a PKCS7 structure just after signing
5133 it used to fail because the attribute order did not match the
5134 encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
5135 it uses the received order. This is necessary to tolerate some broken
5136 software that does not order SET OF. This is handled by encoding
5137 as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
5138 to produce the required SET OF.
5141 *) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
5142 OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
5143 files to get correct declarations of the ASN.1 item variables.
5146 *) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
5147 PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
5148 asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
5149 NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
5150 New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
5151 ASN1_ITEM and no wrapper functions.
5154 *) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
5155 replace the old function pointer based I/O routines. Change most of
5156 the *_d2i_bio() and *_d2i_fp() functions to use these.
5159 *) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
5160 lines, recognice more "algorithms" that can be deselected, and make
5161 it complain about algorithm deselection that isn't recognised.
5164 *) New ASN1 functions to handle dup, sign, verify, digest, pack and
5165 unpack operations in terms of ASN1_ITEM. Modify existing wrappers
5166 to use new functions. Add NO_ASN1_OLD which can be set to remove
5167 some old style ASN1 functions: this can be used to determine if old
5168 code will still work when these eventually go away.
5171 *) New extension functions for OCSP structures, these follow the
5172 same conventions as certificates and CRLs.
5175 *) New function X509V3_add1_i2d(). This automatically encodes and
5176 adds an extension. Its behaviour can be customised with various
5177 flags to append, replace or delete. Various wrappers added for
5178 certifcates and CRLs.
5181 *) Fix to avoid calling the underlying ASN1 print routine when
5182 an extension cannot be parsed. Correct a typo in the
5183 OCSP_SERVICELOC extension. Tidy up print OCSP format.
5186 *) Make mkdef.pl parse some of the ASN1 macros and add apropriate
5187 entries for variables.
5190 *) Add functionality to apps/openssl.c for detecting locking
5191 problems: As the program is single-threaded, all we have
5192 to do is register a locking callback using an array for
5193 storing which locks are currently held by the program.
5196 *) Use a lock around the call to CRYPTO_get_ex_new_index() in
5197 SSL_get_ex_data_X509_STORE_idx(), which is used in
5198 ssl_verify_cert_chain() and thus can be called at any time
5199 during TLS/SSL handshakes so that thread-safety is essential.
5200 Unfortunately, the ex_data design is not at all suited
5201 for multi-threaded use, so it probably should be abolished.
5204 *) Added Broadcom "ubsec" ENGINE to OpenSSL.
5205 [Broadcom, tweaked and integrated by Geoff Thorpe]
5207 *) Move common extension printing code to new function
5208 X509V3_print_extensions(). Reorganise OCSP print routines and
5209 implement some needed OCSP ASN1 functions. Add OCSP extensions.
5212 *) New function X509_signature_print() to remove duplication in some
5216 *) Add a special meaning when SET OF and SEQUENCE OF flags are both
5217 set (this was treated exactly the same as SET OF previously). This
5218 is used to reorder the STACK representing the structure to match the
5219 encoding. This will be used to get round a problem where a PKCS7
5220 structure which was signed could not be verified because the STACK
5221 order did not reflect the encoded order.
5224 *) Reimplement the OCSP ASN1 module using the new code.
5227 *) Update the X509V3 code to permit the use of an ASN1_ITEM structure
5228 for its ASN1 operations. The old style function pointers still exist
5229 for now but they will eventually go away.
5232 *) Merge in replacement ASN1 code from the ASN1 branch. This almost
5233 completely replaces the old ASN1 functionality with a table driven
5234 encoder and decoder which interprets an ASN1_ITEM structure describing
5235 the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
5236 largely maintained. Almost all of the old asn1_mac.h macro based ASN1
5237 has also been converted to the new form.
5240 *) Change BN_mod_exp_recp so that negative moduli are tolerated
5241 (the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
5242 so that BN_mod_exp_mont and BN_mod_exp_mont_word work
5243 for negative moduli.
5246 *) Fix BN_uadd and BN_usub: Always return non-negative results instead
5247 of not touching the result's sign bit.
5250 *) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
5254 *) Changed the LHASH code to use prototypes for callbacks, and created
5255 macros to declare and implement thin (optionally static) functions
5256 that provide type-safety and avoid function pointer casting for the
5257 type-specific callbacks.
5260 *) Added Kerberos Cipher Suites to be used with TLS, as written in
5262 [Veers Staats <staatsvr@asc.hpc.mil>,
5263 Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
5265 *) Reformat the FAQ so the different questions and answers can be divided
5266 in sections depending on the subject.
5269 *) Have the zlib compression code load ZLIB.DLL dynamically under
5273 *) New function BN_mod_sqrt for computing square roots modulo a prime
5274 (using the probabilistic Tonelli-Shanks algorithm unless
5275 p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
5276 be handled deterministically).
5277 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
5279 *) Make BN_mod_inverse faster by explicitly handling small quotients
5280 in the Euclid loop. (Speed gain about 20% for small moduli [256 or
5281 512 bits], about 30% for larger ones [1024 or 2048 bits].)
5284 *) New function BN_kronecker.
5287 *) Fix BN_gcd so that it works on negative inputs; the result is
5288 positive unless both parameters are zero.
5289 Previously something reasonably close to an infinite loop was
5290 possible because numbers could be growing instead of shrinking
5291 in the implementation of Euclid's algorithm.
5294 *) Fix BN_is_word() and BN_is_one() macros to take into account the
5295 sign of the number in question.
5297 Fix BN_is_word(a,w) to work correctly for w == 0.
5299 The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
5300 because its test if the absolute value of 'a' equals 'w'.
5301 Note that BN_abs_is_word does *not* handle w == 0 reliably;
5302 it exists mostly for use in the implementations of BN_is_zero(),
5303 BN_is_one(), and BN_is_word().
5306 *) New function BN_swap.
5309 *) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
5310 the exponentiation functions are more likely to produce reasonable
5311 results on negative inputs.
5314 *) Change BN_mod_mul so that the result is always non-negative.
5315 Previously, it could be negative if one of the factors was negative;
5316 I don't think anyone really wanted that behaviour.
5319 *) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
5320 (except for exponentiation, which stays in crypto/bn/bn_exp.c,
5321 and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
5322 and add new functions:
5331 BN_mod_lshift1_quick
5335 These functions always generate non-negative results.
5337 BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
5338 such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
5340 BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
5341 BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
5342 be reduced modulo m.
5343 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
5346 The following entry accidentily appeared in the CHANGES file
5347 distributed with OpenSSL 0.9.7. The modifications described in
5348 it do *not* apply to OpenSSL 0.9.7.
5350 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
5351 was actually never needed) and in BN_mul(). The removal in BN_mul()
5352 required a small change in bn_mul_part_recursive() and the addition
5353 of the functions bn_cmp_part_words(), bn_sub_part_words() and
5354 bn_add_part_words(), which do the same thing as bn_cmp_words(),
5355 bn_sub_words() and bn_add_words() except they take arrays with
5360 *) In 'openssl passwd', verify passwords read from the terminal
5361 unless the '-salt' option is used (which usually means that
5362 verification would just waste user's time since the resulting
5363 hash is going to be compared with some given password hash)
5364 or the new '-noverify' option is used.
5366 This is an incompatible change, but it does not affect
5367 non-interactive use of 'openssl passwd' (passwords on the command
5368 line, '-stdin' option, '-in ...' option) and thus should not
5372 *) Remove all references to RSAref, since there's no more need for it.
5375 *) Make DSO load along a path given through an environment variable
5376 (SHLIB_PATH) with shl_load().
5379 *) Constify the ENGINE code as a result of BIGNUM constification.
5380 Also constify the RSA code and most things related to it. In a
5381 few places, most notable in the depth of the ASN.1 code, ugly
5382 casts back to non-const were required (to be solved at a later
5386 *) Make it so the openssl application has all engines loaded by default.
5389 *) Constify the BIGNUM routines a little more.
5392 *) Add the following functions:
5394 ENGINE_load_cswift()
5396 ENGINE_load_atalla()
5398 ENGINE_load_builtin_engines()
5400 That way, an application can itself choose if external engines that
5401 are built-in in OpenSSL shall ever be used or not. The benefit is
5402 that applications won't have to be linked with libdl or other dso
5403 libraries unless it's really needed.
5405 Changed 'openssl engine' to load all engines on demand.
5406 Changed the engine header files to avoid the duplication of some
5407 declarations (they differed!).
5410 *) 'openssl engine' can now list capabilities.
5413 *) Better error reporting in 'openssl engine'.
5416 *) Never call load_dh_param(NULL) in s_server.
5419 *) Add engine application. It can currently list engines by name and
5420 identity, and test if they are actually available.
5423 *) Improve RPM specification file by forcing symbolic linking and making
5424 sure the installed documentation is also owned by root.root.
5425 [Damien Miller <djm@mindrot.org>]
5427 *) Give the OpenSSL applications more possibilities to make use of
5428 keys (public as well as private) handled by engines.
5431 *) Add OCSP code that comes from CertCo.
5434 *) Add VMS support for the Rijndael code.
5437 *) Added untested support for Nuron crypto accelerator.
5440 *) Add support for external cryptographic devices. This code was
5441 previously distributed separately as the "engine" branch.
5442 [Geoff Thorpe, Richard Levitte]
5444 *) Rework the filename-translation in the DSO code. It is now possible to
5445 have far greater control over how a "name" is turned into a filename
5446 depending on the operating environment and any oddities about the
5447 different shared library filenames on each system.
5450 *) Support threads on FreeBSD-elf in Configure.
5453 *) Fix for SHA1 assembly problem with MASM: it produces
5454 warnings about corrupt line number information when assembling
5455 with debugging information. This is caused by the overlapping
5457 [Bernd Matthes <mainbug@celocom.de>, Steve Henson]
5460 NCONF_get_number() has no error checking at all. As a replacement,
5461 NCONF_get_number_e() is defined (_e for "error checking") and is
5462 promoted strongly. The old NCONF_get_number is kept around for
5463 binary backward compatibility.
5464 Make it possible for methods to load from something other than a BIO,
5465 by providing a function pointer that is given a name instead of a BIO.
5466 For example, this could be used to load configuration data from an
5470 *) Fix for non blocking accept BIOs. Added new I/O special reason
5471 BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
5472 with non blocking I/O was not possible because no retry code was
5473 implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
5477 *) Added the beginnings of Rijndael support.
5480 *) Fix for bug in DirectoryString mask setting. Add support for
5481 X509_NAME_print_ex() in 'req' and X509_print_ex() function
5482 to allow certificate printing to more controllable, additional
5483 'certopt' option to 'x509' to allow new printing options to be
5487 *) Clean old EAY MD5 hack from e_os.h.
5490 Changes between 0.9.6l and 0.9.6m [17 Mar 2004]
5492 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
5493 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
5494 [Joe Orton, Steve Henson]
5496 Changes between 0.9.6k and 0.9.6l [04 Nov 2003]
5498 *) Fix additional bug revealed by the NISCC test suite:
5500 Stop bug triggering large recursion when presented with
5501 certain ASN.1 tags (CVE-2003-0851)
5504 Changes between 0.9.6j and 0.9.6k [30 Sep 2003]
5506 *) Fix various bugs revealed by running the NISCC test suite:
5508 Stop out of bounds reads in the ASN1 code when presented with
5509 invalid tags (CVE-2003-0543 and CVE-2003-0544).
5511 If verify callback ignores invalid public key errors don't try to check
5512 certificate signature with the NULL public key.
5516 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
5517 if the server requested one: as stated in TLS 1.0 and SSL 3.0
5521 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
5522 extra data after the compression methods not only for TLS 1.0
5523 but also for SSL 3.0 (as required by the specification).
5524 [Bodo Moeller; problem pointed out by Matthias Loepfe]
5526 *) Change X509_certificate_type() to mark the key as exported/exportable
5527 when it's 512 *bits* long, not 512 bytes.
5530 Changes between 0.9.6i and 0.9.6j [10 Apr 2003]
5532 *) Countermeasure against the Klima-Pokorny-Rosa extension of
5533 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
5534 a protocol version number mismatch like a decryption error
5535 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
5538 *) Turn on RSA blinding by default in the default implementation
5539 to avoid a timing attack. Applications that don't want it can call
5540 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
5541 They would be ill-advised to do so in most cases.
5542 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
5544 *) Change RSA blinding code so that it works when the PRNG is not
5545 seeded (in this case, the secret RSA exponent is abused as
5546 an unpredictable seed -- if it is not unpredictable, there
5547 is no point in blinding anyway). Make RSA blinding thread-safe
5548 by remembering the creator's thread ID in rsa->blinding and
5549 having all other threads use local one-time blinding factors
5550 (this requires more computation than sharing rsa->blinding, but
5551 avoids excessive locking; and if an RSA object is not shared
5552 between threads, blinding will still be very fast).
5555 Changes between 0.9.6h and 0.9.6i [19 Feb 2003]
5557 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
5558 via timing by performing a MAC computation even if incorrrect
5559 block cipher padding has been found. This is a countermeasure
5560 against active attacks where the attacker has to distinguish
5561 between bad padding and a MAC verification error. (CVE-2003-0078)
5563 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
5564 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
5565 Martin Vuagnoux (EPFL, Ilion)]
5567 Changes between 0.9.6g and 0.9.6h [5 Dec 2002]
5569 *) New function OPENSSL_cleanse(), which is used to cleanse a section of
5570 memory from it's contents. This is done with a counter that will
5571 place alternating values in each byte. This can be used to solve
5572 two issues: 1) the removal of calls to memset() by highly optimizing
5573 compilers, and 2) cleansing with other values than 0, since those can
5574 be read through on certain media, for example a swap space on disk.
5577 *) Bugfix: client side session caching did not work with external caching,
5578 because the session->cipher setting was not restored when reloading
5579 from the external cache. This problem was masked, when
5580 SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
5581 (Found by Steve Haslam <steve@araqnid.ddts.net>.)
5584 *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
5585 length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
5586 [Zeev Lieber <zeev-l@yahoo.com>]
5588 *) Undo an undocumented change introduced in 0.9.6e which caused
5589 repeated calls to OpenSSL_add_all_ciphers() and
5590 OpenSSL_add_all_digests() to be ignored, even after calling
5594 *) Change the default configuration reader to deal with last line not
5595 being properly terminated.
5598 *) Change X509_NAME_cmp() so it applies the special rules on handling
5599 DN values that are of type PrintableString, as well as RDNs of type
5600 emailAddress where the value has the type ia5String.
5601 [stefank@valicert.com via Richard Levitte]
5603 *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
5604 the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
5605 doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
5606 the bitwise-OR of the two for use by the majority of applications
5607 wanting this behaviour, and update the docs. The documented
5608 behaviour and actual behaviour were inconsistent and had been
5609 changing anyway, so this is more a bug-fix than a behavioural
5611 [Geoff Thorpe, diagnosed by Nadav Har'El]
5613 *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
5614 (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
5617 *) Fix initialization code race conditions in
5618 SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
5619 SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
5620 SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
5621 TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
5622 ssl2_get_cipher_by_char(),
5623 ssl3_get_cipher_by_char().
5624 [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
5626 *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
5627 the cached sessions are flushed, as the remove_cb() might use ex_data
5628 contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
5629 (see [openssl.org #212]).
5630 [Geoff Thorpe, Lutz Jaenicke]
5632 *) Fix typo in OBJ_txt2obj which incorrectly passed the content
5633 length, instead of the encoding length to d2i_ASN1_OBJECT.
5636 Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
5638 *) [In 0.9.6g-engine release:]
5639 Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
5640 [Lynn Gazis <lgazis@rainbow.com>]
5642 Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
5644 *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
5645 and get fix the header length calculation.
5646 [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
5647 Alon Kantor <alonk@checkpoint.com> (and others),
5650 *) Use proper error handling instead of 'assertions' in buffer
5651 overflow checks added in 0.9.6e. This prevents DoS (the
5652 assertions could call abort()).
5653 [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
5655 Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
5657 *) Add various sanity checks to asn1_get_length() to reject
5658 the ASN1 length bytes if they exceed sizeof(long), will appear
5659 negative or the content length exceeds the length of the
5661 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
5663 *) Fix cipher selection routines: ciphers without encryption had no flags
5664 for the cipher strength set and where therefore not handled correctly
5665 by the selection routines (PR #130).
5668 *) Fix EVP_dsa_sha macro.
5672 SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
5673 for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
5674 that was added in OpenSSL 0.9.6d.
5676 As the countermeasure turned out to be incompatible with some
5677 broken SSL implementations, the new option is part of SSL_OP_ALL.
5678 SSL_OP_ALL is usually employed when compatibility with weird SSL
5679 implementations is desired (e.g. '-bugs' option to 's_client' and
5680 's_server'), so the new option is automatically set in many
5684 *) Changes in security patch:
5686 Changes marked "(CHATS)" were sponsored by the Defense Advanced
5687 Research Projects Agency (DARPA) and Air Force Research Laboratory,
5688 Air Force Materiel Command, USAF, under agreement number
5691 *) Add various sanity checks to asn1_get_length() to reject
5692 the ASN1 length bytes if they exceed sizeof(long), will appear
5693 negative or the content length exceeds the length of the
5694 supplied buffer. (CVE-2002-0659)
5695 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
5697 *) Assertions for various potential buffer overflows, not known to
5699 [Ben Laurie (CHATS)]
5701 *) Various temporary buffers to hold ASCII versions of integers were
5702 too small for 64 bit platforms. (CVE-2002-0655)
5703 [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
5705 *) Remote buffer overflow in SSL3 protocol - an attacker could
5706 supply an oversized session ID to a client. (CVE-2002-0656)
5707 [Ben Laurie (CHATS)]
5709 *) Remote buffer overflow in SSL2 protocol - an attacker could
5710 supply an oversized client master key. (CVE-2002-0656)
5711 [Ben Laurie (CHATS)]
5713 Changes between 0.9.6c and 0.9.6d [9 May 2002]
5715 *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
5716 encoded as NULL) with id-dsa-with-sha1.
5717 [Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
5719 *) Check various X509_...() return values in apps/req.c.
5720 [Nils Larsch <nla@trustcenter.de>]
5722 *) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
5723 an end-of-file condition would erronously be flagged, when the CRLF
5724 was just at the end of a processed block. The bug was discovered when
5725 processing data through a buffering memory BIO handing the data to a
5726 BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
5727 <ptsekov@syntrex.com> and Nedelcho Stanev.
5730 *) Implement a countermeasure against a vulnerability recently found
5731 in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
5732 before application data chunks to avoid the use of known IVs
5733 with data potentially chosen by the attacker.
5736 *) Fix length checks in ssl3_get_client_hello().
5739 *) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
5740 to prevent ssl3_read_internal() from incorrectly assuming that
5741 ssl3_read_bytes() found application data while handshake
5742 processing was enabled when in fact s->s3->in_read_app_data was
5743 merely automatically cleared during the initial handshake.
5744 [Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
5746 *) Fix object definitions for Private and Enterprise: they were not
5747 recognized in their shortname (=lowercase) representation. Extend
5748 obj_dat.pl to issue an error when using undefined keywords instead
5749 of silently ignoring the problem (Svenning Sorensen
5750 <sss@sss.dnsalias.net>).
5753 *) Fix DH_generate_parameters() so that it works for 'non-standard'
5754 generators, i.e. generators other than 2 and 5. (Previously, the
5755 code did not properly initialise the 'add' and 'rem' values to
5756 BN_generate_prime().)
5758 In the new general case, we do not insist that 'generator' is
5759 actually a primitive root: This requirement is rather pointless;
5760 a generator of the order-q subgroup is just as good, if not
5764 *) Map new X509 verification errors to alerts. Discovered and submitted by
5765 Tom Wu <tom@arcot.com>.
5768 *) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
5769 returning non-zero before the data has been completely received
5770 when using non-blocking I/O.
5771 [Bodo Moeller; problem pointed out by John Hughes]
5773 *) Some of the ciphers missed the strength entry (SSL_LOW etc).
5774 [Ben Laurie, Lutz Jaenicke]
5776 *) Fix bug in SSL_clear(): bad sessions were not removed (found by
5777 Yoram Zahavi <YoramZ@gilian.com>).
5780 *) Add information about CygWin 1.3 and on, and preserve proper
5781 configuration for the versions before that.
5782 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
5784 *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
5785 check whether we deal with a copy of a session and do not delete from
5786 the cache in this case. Problem reported by "Izhar Shoshani Levi"
5787 <izhar@checkpoint.com>.
5790 *) Do not store session data into the internal session cache, if it
5791 is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
5792 flag is set). Proposed by Aslam <aslam@funk.com>.
5795 *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
5799 *) [In 0.9.6d-engine release:]
5800 Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
5801 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
5803 *) Add the configuration target linux-s390x.
5804 [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
5806 *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
5807 ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
5808 variable as an indication that a ClientHello message has been
5809 received. As the flag value will be lost between multiple
5810 invocations of ssl3_accept when using non-blocking I/O, the
5811 function may not be aware that a handshake has actually taken
5812 place, thus preventing a new session from being added to the
5815 To avoid this problem, we now set s->new_session to 2 instead of
5816 using a local variable.
5817 [Lutz Jaenicke, Bodo Moeller]
5819 *) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
5820 if the SSL_R_LENGTH_MISMATCH error is detected.
5821 [Geoff Thorpe, Bodo Moeller]
5823 *) New 'shared_ldflag' column in Configure platform table.
5826 *) Fix EVP_CIPHER_mode macro.
5827 ["Dan S. Camper" <dan@bti.net>]
5829 *) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
5830 type, we must throw them away by setting rr->length to 0.
5831 [D P Chang <dpc@qualys.com>]
5833 Changes between 0.9.6b and 0.9.6c [21 dec 2001]
5835 *) Fix BN_rand_range bug pointed out by Dominikus Scherkl
5836 <Dominikus.Scherkl@biodata.com>. (The previous implementation
5837 worked incorrectly for those cases where range = 10..._2 and
5838 3*range is two bits longer than range.)
5841 *) Only add signing time to PKCS7 structures if it is not already
5845 *) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
5846 OBJ_ld_ce should be OBJ_id_ce.
5847 Also some ip-pda OIDs in crypto/objects/objects.txt were
5848 incorrect (cf. RFC 3039).
5849 [Matt Cooper, Frederic Giudicelli, Bodo Moeller]
5851 *) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
5852 returns early because it has nothing to do.
5853 [Andy Schneider <andy.schneider@bjss.co.uk>]
5855 *) [In 0.9.6c-engine release:]
5856 Fix mutex callback return values in crypto/engine/hw_ncipher.c.
5857 [Andy Schneider <andy.schneider@bjss.co.uk>]
5859 *) [In 0.9.6c-engine release:]
5860 Add support for Cryptographic Appliance's keyserver technology.
5861 (Use engine 'keyclient')
5862 [Cryptographic Appliances and Geoff Thorpe]
5864 *) Add a configuration entry for OS/390 Unix. The C compiler 'c89'
5865 is called via tools/c89.sh because arguments have to be
5866 rearranged (all '-L' options must appear before the first object
5868 [Richard Shapiro <rshapiro@abinitio.com>]
5870 *) [In 0.9.6c-engine release:]
5871 Add support for Broadcom crypto accelerator cards, backported
5873 [Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
5875 *) [In 0.9.6c-engine release:]
5876 Add support for SureWare crypto accelerator cards from
5877 Baltimore Technologies. (Use engine 'sureware')
5878 [Baltimore Technologies and Mark Cox]
5880 *) [In 0.9.6c-engine release:]
5881 Add support for crypto accelerator cards from Accelerated
5882 Encryption Processing, www.aep.ie. (Use engine 'aep')
5883 [AEP Inc. and Mark Cox]
5885 *) Add a configuration entry for gcc on UnixWare.
5886 [Gary Benson <gbenson@redhat.com>]
5888 *) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
5889 messages are stored in a single piece (fixed-length part and
5890 variable-length part combined) and fix various bugs found on the way.
5893 *) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
5894 instead. BIO_gethostbyname() does not know what timeouts are
5895 appropriate, so entries would stay in cache even when they have
5897 [Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
5899 *) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
5900 faced with a pathologically small ClientHello fragment that does
5901 not contain client_version: Instead of aborting with an error,
5902 simply choose the highest available protocol version (i.e.,
5903 TLS 1.0 unless it is disabled). In practice, ClientHello
5904 messages are never sent like this, but this change gives us
5905 strictly correct behaviour at least for TLS.
5908 *) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
5909 never resets s->method to s->ctx->method when called from within
5910 one of the SSL handshake functions.
5911 [Bodo Moeller; problem pointed out by Niko Baric]
5913 *) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
5914 (sent using the client's version number) if client_version is
5915 smaller than the protocol version in use. Also change
5916 ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
5917 the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
5918 the client will at least see that alert.
5921 *) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
5925 *) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
5926 client receives HelloRequest while in a handshake.
5927 [Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
5929 *) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
5930 should end in 'break', not 'goto end' which circuments various
5931 cleanups done in state SSL_ST_OK. But session related stuff
5932 must be disabled for SSL_ST_OK in the case that we just sent a
5935 Also avoid some overhead by not calling ssl_init_wbio_buffer()
5936 before just sending a HelloRequest.
5937 [Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
5939 *) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
5940 reveal whether illegal block cipher padding was found or a MAC
5941 verification error occured. (Neither SSLerr() codes nor alerts
5942 are directly visible to potential attackers, but the information
5943 may leak via logfiles.)
5945 Similar changes are not required for the SSL 2.0 implementation
5946 because the number of padding bytes is sent in clear for SSL 2.0,
5947 and the extra bytes are just ignored. However ssl/s2_pkt.c
5948 failed to verify that the purported number of padding bytes is in
5952 *) Add OpenUNIX-8 support including shared libraries
5953 (Boyd Lynn Gerber <gerberb@zenez.com>).
5956 *) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
5957 'wristwatch attack' using huge encoding parameters (cf.
5958 James H. Manger's CRYPTO 2001 paper). Note that the
5959 RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
5960 encoding parameters and hence was not vulnerable.
5963 *) BN_sqr() bug fix.
5964 [Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
5966 *) Rabin-Miller test analyses assume uniformly distributed witnesses,
5967 so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
5968 followed by modular reduction.
5969 [Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
5971 *) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
5972 equivalent based on BN_pseudo_rand() instead of BN_rand().
5975 *) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
5976 This function was broken, as the check for a new client hello message
5977 to handle SGC did not allow these large messages.
5978 (Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
5981 *) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
5984 *) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
5985 for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
5988 *) Rework the configuration and shared library support for Tru64 Unix.
5989 The configuration part makes use of modern compiler features and
5990 still retains old compiler behavior for those that run older versions
5991 of the OS. The shared library support part includes a variant that
5992 uses the RPATH feature, and is available through the special
5993 configuration target "alpha-cc-rpath", which will never be selected
5995 [Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
5997 *) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
5998 with the same message size as in ssl3_get_certificate_request().
5999 Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
6000 messages might inadvertently be reject as too long.
6001 [Petr Lampa <lampa@fee.vutbr.cz>]
6003 *) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
6006 *) Modified SSL library such that the verify_callback that has been set
6007 specificly for an SSL object with SSL_set_verify() is actually being
6008 used. Before the change, a verify_callback set with this function was
6009 ignored and the verify_callback() set in the SSL_CTX at the time of
6010 the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
6011 to allow the necessary settings.
6014 *) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
6015 explicitly to NULL, as at least on Solaris 8 this seems not always to be
6016 done automatically (in contradiction to the requirements of the C
6017 standard). This made problems when used from OpenSSH.
6020 *) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
6021 dh->length and always used
6023 BN_rand_range(priv_key, dh->p).
6025 BN_rand_range() is not necessary for Diffie-Hellman, and this
6026 specific range makes Diffie-Hellman unnecessarily inefficient if
6027 dh->length (recommended exponent length) is much smaller than the
6028 length of dh->p. We could use BN_rand_range() if the order of
6029 the subgroup was stored in the DH structure, but we only have
6034 BN_rand(priv_key, l, ...)
6036 where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
6042 RSA_eay_public_encrypt
6043 RSA_eay_private_decrypt
6044 RSA_eay_private_encrypt (signing)
6045 RSA_eay_public_decrypt (signature verification)
6047 (default implementations for RSA_public_encrypt,
6048 RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
6049 always reject numbers >= n.
6052 *) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
6053 to synchronize access to 'locking_thread'. This is necessary on
6054 systems where access to 'locking_thread' (an 'unsigned long'
6055 variable) is not atomic.
6058 *) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
6059 *before* setting the 'crypto_lock_rand' flag. The previous code had
6060 a race condition if 0 is a valid thread ID.
6061 [Travis Vitek <vitek@roguewave.com>]
6063 *) Add support for shared libraries under Irix.
6064 [Albert Chin-A-Young <china@thewrittenword.com>]
6066 *) Add configuration option to build on Linux on both big-endian and
6068 [Ralf Baechle <ralf@uni-koblenz.de>]
6070 *) Add the possibility to create shared libraries on HP-UX.
6073 Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
6075 *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
6076 to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
6077 Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
6078 PRNG state recovery was possible based on the output of
6079 one PRNG request appropriately sized to gain knowledge on
6080 'md' followed by enough consecutive 1-byte PRNG requests
6081 to traverse all of 'state'.
6083 1. When updating 'md_local' (the current thread's copy of 'md')
6084 during PRNG output generation, hash all of the previous
6085 'md_local' value, not just the half used for PRNG output.
6087 2. Make the number of bytes from 'state' included into the hash
6088 independent from the number of PRNG bytes requested.
6090 The first measure alone would be sufficient to avoid
6091 Markku-Juhani's attack. (Actually it had never occurred
6092 to me that the half of 'md_local' used for chaining was the
6093 half from which PRNG output bytes were taken -- I had always
6094 assumed that the secret half would be used.) The second
6095 measure makes sure that additional data from 'state' is never
6096 mixed into 'md_local' in small portions; this heuristically
6097 further strengthens the PRNG.
6100 *) Fix crypto/bn/asm/mips3.s.
6103 *) When only the key is given to "enc", the IV is undefined. Print out
6104 an error message in this case.
6107 *) Handle special case when X509_NAME is empty in X509 printing routines.
6110 *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
6111 positive and less than q.
6114 *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
6115 used: it isn't thread safe and the add_lock_callback should handle
6117 [Paul Rose <Paul.Rose@bridge.com>]
6119 *) Verify that incoming data obeys the block size in
6120 ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
6124 [Ulf Möller, Bodo Möller]
6126 *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
6127 RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
6128 when fixing the server behaviour for backwards-compatible 'client
6129 hello' messages. (Note that the attack is impractical against
6130 SSL 3.0 and TLS 1.0 anyway because length and version checking
6131 means that the probability of guessing a valid ciphertext is
6132 around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
6135 Before 0.9.5, the countermeasure (hide the error by generating a
6136 random 'decryption result') did not work properly because
6137 ERR_clear_error() was missing, meaning that SSL_get_error() would
6138 detect the supposedly ignored error.
6140 Both problems are now fixed.
6143 *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
6144 (previously it was 1024).
6147 *) Fix for compatibility mode trust settings: ignore trust settings
6148 unless some valid trust or reject settings are present.
6151 *) Fix for blowfish EVP: its a variable length cipher.
6154 *) Fix various bugs related to DSA S/MIME verification. Handle missing
6155 parameters in DSA public key structures and return an error in the
6156 DSA routines if parameters are absent.
6159 *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
6160 in the current directory if neither $RANDFILE nor $HOME was set.
6161 RAND_file_name() in 0.9.6a returned NULL in this case. This has
6162 caused some confusion to Windows users who haven't defined $HOME.
6163 Thus RAND_file_name() is changed again: e_os.h can define a
6164 DEFAULT_HOME, which will be used if $HOME is not set.
6165 For Windows, we use "C:"; on other platforms, we still require
6166 environment variables.
6168 *) Move 'if (!initialized) RAND_poll()' into regions protected by
6169 CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
6170 having multiple threads call RAND_poll() concurrently.
6173 *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
6174 combination of a flag and a thread ID variable.
6175 Otherwise while one thread is in ssleay_rand_bytes (which sets the
6176 flag), *other* threads can enter ssleay_add_bytes without obeying
6177 the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
6178 that they do not hold after the first thread unsets add_do_not_lock).
6181 *) Change bctest again: '-x' expressions are not available in all
6185 Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
6187 *) Fix a couple of memory leaks in PKCS7_dataDecode()
6188 [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
6190 *) Change Configure and Makefiles to provide EXE_EXT, which will contain
6191 the default extension for executables, if any. Also, make the perl
6192 scripts that use symlink() to test if it really exists and use "cp"
6193 if it doesn't. All this made OpenSSL compilable and installable in
6197 *) Fix for asn1_GetSequence() for indefinite length constructed data.
6198 If SEQUENCE is length is indefinite just set c->slen to the total
6199 amount of data available.
6200 [Steve Henson, reported by shige@FreeBSD.org]
6201 [This change does not apply to 0.9.7.]
6203 *) Change bctest to avoid here-documents inside command substitution
6204 (workaround for FreeBSD /bin/sh bug).
6205 For compatibility with Ultrix, avoid shell functions (introduced
6206 in the bctest version that searches along $PATH).
6209 *) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
6210 with des_encrypt() defined on some operating systems, like Solaris
6214 *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
6215 On the Importance of Eliminating Errors in Cryptographic
6216 Computations, J. Cryptology 14 (2001) 2, 101-119,
6217 http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
6220 *) MIPS assembler BIGNUM division bug fix.
6223 *) Disabled incorrect Alpha assembler code.
6226 *) Fix PKCS#7 decode routines so they correctly update the length
6227 after reading an EOC for the EXPLICIT tag.
6229 [This change does not apply to 0.9.7.]
6231 *) Fix bug in PKCS#12 key generation routines. This was triggered
6232 if a 3DES key was generated with a 0 initial byte. Include
6233 PKCS12_BROKEN_KEYGEN compilation option to retain the old
6234 (but broken) behaviour.
6237 *) Enhance bctest to search for a working bc along $PATH and print
6239 [Tim Rice <tim@multitalents.net> via Richard Levitte]
6241 *) Fix memory leaks in err.c: free err_data string if necessary;
6242 don't write to the wrong index in ERR_set_error_data.
6245 *) Implement ssl23_peek (analogous to ssl23_read), which previously
6249 *) Replace rdtsc with _emit statements for VC++ version 5.
6250 [Jeremy Cooper <jeremy@baymoo.org>]
6252 *) Make it possible to reuse SSLv2 sessions.
6255 *) In copy_email() check for >= 0 as a return value for
6256 X509_NAME_get_index_by_NID() since 0 is a valid index.
6257 [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
6259 *) Avoid coredump with unsupported or invalid public keys by checking if
6260 X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
6261 PKCS7_verify() fails with non detached data.
6264 *) Don't use getenv in library functions when run as setuid/setgid.
6265 New function OPENSSL_issetugid().
6268 *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
6269 due to incorrect handling of multi-threading:
6271 1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
6273 2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
6275 3. Count how many times MemCheck_off() has been called so that
6276 nested use can be treated correctly. This also avoids
6277 inband-signalling in the previous code (which relied on the
6278 assumption that thread ID 0 is impossible).
6281 *) Add "-rand" option also to s_client and s_server.
6284 *) Fix CPU detection on Irix 6.x.
6285 [Kurt Hockenbury <khockenb@stevens-tech.edu> and
6286 "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
6288 *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
6291 [This change does not apply to 0.9.7.]
6293 *) Use the cached encoding of an X509_NAME structure rather than
6294 copying it. This is apparently the reason for the libsafe "errors"
6295 but the code is actually correct.
6298 *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
6299 Bleichenbacher's DSA attack.
6300 Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
6301 to be set and top=0 forces the highest bit to be set; top=-1 is new
6302 and leaves the highest bit random.
6303 [Ulf Moeller, Bodo Moeller]
6305 *) In the NCONF_...-based implementations for CONF_... queries
6306 (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
6307 a temporary CONF structure with the data component set to NULL
6308 (which gives segmentation faults in lh_retrieve).
6309 Instead, use NULL for the CONF pointer in CONF_get_string and
6310 CONF_get_number (which may use environment variables) and directly
6311 return NULL from CONF_get_section.
6314 *) Fix potential buffer overrun for EBCDIC.
6317 *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
6318 keyUsage if basicConstraints absent for a CA.
6321 *) Make SMIME_write_PKCS7() write mail header values with a format that
6322 is more generally accepted (no spaces before the semicolon), since
6323 some programs can't parse those values properly otherwise. Also make
6324 sure BIO's that break lines after each write do not create invalid
6328 *) Make the CRL encoding routines work with empty SEQUENCE OF. The
6329 macros previously used would not encode an empty SEQUENCE OF
6330 and break the signature.
6332 [This change does not apply to 0.9.7.]
6334 *) Zero the premaster secret after deriving the master secret in
6338 *) Add some EVP_add_digest_alias registrations (as found in
6339 OpenSSL_add_all_digests()) to SSL_library_init()
6340 aka OpenSSL_add_ssl_algorithms(). This provides improved
6341 compatibility with peers using X.509 certificates
6342 with unconventional AlgorithmIdentifier OIDs.
6345 *) Fix for Irix with NO_ASM.
6346 ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
6348 *) ./config script fixes.
6349 [Ulf Moeller, Richard Levitte]
6351 *) Fix 'openssl passwd -1'.
6354 *) Change PKCS12_key_gen_asc() so it can cope with non null
6355 terminated strings whose length is passed in the passlen
6356 parameter, for example from PEM callbacks. This was done
6357 by adding an extra length parameter to asc2uni().
6358 [Steve Henson, reported by <oddissey@samsung.co.kr>]
6360 *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
6361 call failed, free the DSA structure.
6364 *) Fix to uni2asc() to cope with zero length Unicode strings.
6365 These are present in some PKCS#12 files.
6368 *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
6369 Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
6370 when writing a 32767 byte record.
6371 [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
6373 *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
6374 obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
6376 (RSA objects have a reference count access to which is protected
6377 by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
6378 so they are meant to be shared between threads.)
6379 [Bodo Moeller, Geoff Thorpe; original patch submitted by
6380 "Reddie, Steven" <Steven.Reddie@ca.com>]
6382 *) Fix a deadlock in CRYPTO_mem_leaks().
6385 *) Use better test patterns in bntest.
6388 *) rand_win.c fix for Borland C.
6391 *) BN_rshift bugfix for n == 0.
6394 *) Add a 'bctest' script that checks for some known 'bc' bugs
6395 so that 'make test' does not abort just because 'bc' is broken.
6398 *) Store verify_result within SSL_SESSION also for client side to
6399 avoid potential security hole. (Re-used sessions on the client side
6400 always resulted in verify_result==X509_V_OK, not using the original
6401 result of the server certificate verification.)
6404 *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
6405 SSL3_RT_APPLICATION_DATA, return 0.
6406 Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
6410 Both ssl2_peek and ssl3_peek, which were totally broken in earlier
6411 releases, have been re-implemented by renaming the previous
6412 implementations of ssl2_read and ssl3_read to ssl2_read_internal
6413 and ssl3_read_internal, respectively, and adding 'peek' parameters
6414 to them. The new ssl[23]_{read,peek} functions are calls to
6415 ssl[23]_read_internal with the 'peek' flag set appropriately.
6416 A 'peek' parameter has also been added to ssl3_read_bytes, which
6417 does the actual work for ssl3_read_internal.
6420 *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
6421 the method-specific "init()" handler. Also clean up ex_data after
6422 calling the method-specific "finish()" handler. Previously, this was
6423 happening the other way round.
6426 *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
6427 The previous value, 12, was not always sufficient for BN_mod_exp().
6430 *) Make sure that shared libraries get the internal name engine with
6431 the full version number and not just 0. This should mark the
6432 shared libraries as not backward compatible. Of course, this should
6433 be changed again when we can guarantee backward binary compatibility.
6436 *) Fix typo in get_cert_by_subject() in by_dir.c
6437 [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
6439 *) Rework the system to generate shared libraries:
6441 - Make note of the expected extension for the shared libraries and
6442 if there is a need for symbolic links from for example libcrypto.so.0
6443 to libcrypto.so.0.9.7. There is extended info in Configure for
6446 - Make as few rebuilds of the shared libraries as possible.
6448 - Still avoid linking the OpenSSL programs with the shared libraries.
6450 - When installing, install the shared libraries separately from the
6454 *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
6456 Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
6457 and not in SSL_clear because the latter is also used by the
6458 accept/connect functions; previously, the settings made by
6459 SSL_set_read_ahead would be lost during the handshake.
6460 [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
6462 *) Correct util/mkdef.pl to be selective about disabled algorithms.
6463 Previously, it would create entries for disableed algorithms no
6467 *) Added several new manual pages for SSL_* function.
6470 Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
6472 *) In ssl23_get_client_hello, generate an error message when faced
6473 with an initial SSL 3.0/TLS record that is too small to contain the
6474 first two bytes of the ClientHello message, i.e. client_version.
6475 (Note that this is a pathologic case that probably has never happened
6476 in real life.) The previous approach was to use the version number
6477 from the record header as a substitute; but our protocol choice
6478 should not depend on that one because it is not authenticated
6479 by the Finished messages.
6482 *) More robust randomness gathering functions for Windows.
6483 [Jeffrey Altman <jaltman@columbia.edu>]
6485 *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
6486 not set then we don't setup the error code for issuer check errors
6487 to avoid possibly overwriting other errors which the callback does
6488 handle. If an application does set the flag then we assume it knows
6489 what it is doing and can handle the new informational codes
6493 *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
6494 a general "ANY" type, as such it should be able to decode anything
6495 including tagged types. However it didn't check the class so it would
6496 wrongly interpret tagged types in the same way as their universal
6497 counterpart and unknown types were just rejected. Changed so that the
6498 tagged and unknown types are handled in the same way as a SEQUENCE:
6499 that is the encoding is stored intact. There is also a new type
6500 "V_ASN1_OTHER" which is used when the class is not universal, in this
6501 case we have no idea what the actual type is so we just lump them all
6505 *) On VMS, stdout may very well lead to a file that is written to
6506 in a record-oriented fashion. That means that every write() will
6507 write a separate record, which will be read separately by the
6508 programs trying to read from it. This can be very confusing.
6510 The solution is to put a BIO filter in the way that will buffer
6511 text until a linefeed is reached, and then write everything a
6512 line at a time, so every record written will be an actual line,
6513 not chunks of lines and not (usually doesn't happen, but I've
6514 seen it once) several lines in one record. BIO_f_linebuffer() is
6517 Currently, it's a VMS-only method, because that's where it has
6518 been tested well enough.
6521 *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
6522 it can return incorrect results.
6523 (Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
6524 but it was in 0.9.6-beta[12].)
6527 *) Disable the check for content being present when verifying detached
6528 signatures in pk7_smime.c. Some versions of Netscape (wrongly)
6529 include zero length content when signing messages.
6532 *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
6533 BIO_ctrl (for BIO pairs).
6536 *) Add DSO method for VMS.
6539 *) Bug fix: Montgomery multiplication could produce results with the
6543 *) Add RPM specification openssl.spec and modify it to build three
6544 packages. The default package contains applications, application
6545 documentation and run-time libraries. The devel package contains
6546 include files, static libraries and function documentation. The
6547 doc package contains the contents of the doc directory. The original
6548 openssl.spec was provided by Damien Miller <djm@mindrot.org>.
6551 *) Add a large number of documentation files for many SSL routines.
6552 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
6554 *) Add a configuration entry for Sony News 4.
6555 [NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
6557 *) Don't set the two most significant bits to one when generating a
6558 random number < q in the DSA library.
6561 *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
6562 behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
6563 the underlying transport is blocking) if a handshake took place.
6564 (The default behaviour is needed by applications such as s_client
6565 and s_server that use select() to determine when to use SSL_read;
6566 but for applications that know in advance when to expect data, it
6567 just makes things more complicated.)
6570 *) Add RAND_egd_bytes(), which gives control over the number of bytes read
6574 *) Add a few more EBCDIC conditionals that make `req' and `x509'
6575 work better on such systems.
6576 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
6578 *) Add two demo programs for PKCS12_parse() and PKCS12_create().
6579 Update PKCS12_parse() so it copies the friendlyName and the
6580 keyid to the certificates aux info.
6583 *) Fix bug in PKCS7_verify() which caused an infinite loop
6584 if there was more than one signature.
6585 [Sven Uszpelkat <su@celocom.de>]
6587 *) Major change in util/mkdef.pl to include extra information
6588 about each symbol, as well as presentig variables as well
6589 as functions. This change means that there's n more need
6590 to rebuild the .num files when some algorithms are excluded.
6593 *) Allow the verify time to be set by an application,
6594 rather than always using the current time.
6597 *) Phase 2 verify code reorganisation. The certificate
6598 verify code now looks up an issuer certificate by a
6599 number of criteria: subject name, authority key id
6600 and key usage. It also verifies self signed certificates
6601 by the same criteria. The main comparison function is
6602 X509_check_issued() which performs these checks.
6604 Lot of changes were necessary in order to support this
6605 without completely rewriting the lookup code.
6607 Authority and subject key identifier are now cached.
6609 The LHASH 'certs' is X509_STORE has now been replaced
6610 by a STACK_OF(X509_OBJECT). This is mainly because an
6611 LHASH can't store or retrieve multiple objects with
6612 the same hash value.
6614 As a result various functions (which were all internal
6615 use only) have changed to handle the new X509_STORE
6616 structure. This will break anything that messed round
6617 with X509_STORE internally.
6619 The functions X509_STORE_add_cert() now checks for an
6620 exact match, rather than just subject name.
6622 The X509_STORE API doesn't directly support the retrieval
6623 of multiple certificates matching a given criteria, however
6624 this can be worked round by performing a lookup first
6625 (which will fill the cache with candidate certificates)
6626 and then examining the cache for matches. This is probably
6627 the best we can do without throwing out X509_LOOKUP
6628 entirely (maybe later...).
6630 The X509_VERIFY_CTX structure has been enhanced considerably.
6632 All certificate lookup operations now go via a get_issuer()
6633 callback. Although this currently uses an X509_STORE it
6634 can be replaced by custom lookups. This is a simple way
6635 to bypass the X509_STORE hackery necessary to make this
6636 work and makes it possible to use more efficient techniques
6637 in future. A very simple version which uses a simple
6638 STACK for its trusted certificate store is also provided
6639 using X509_STORE_CTX_trusted_stack().
6641 The verify_cb() and verify() callbacks now have equivalents
6642 in the X509_STORE_CTX structure.
6644 X509_STORE_CTX also has a 'flags' field which can be used
6645 to customise the verify behaviour.
6648 *) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
6649 excludes S/MIME capabilities.
6652 *) When a certificate request is read in keep a copy of the
6653 original encoding of the signed data and use it when outputing
6654 again. Signatures then use the original encoding rather than
6655 a decoded, encoded version which may cause problems if the
6656 request is improperly encoded.
6659 *) For consistency with other BIO_puts implementations, call
6660 buffer_write(b, ...) directly in buffer_puts instead of calling
6663 In BIO_puts, increment b->num_write as in BIO_write.
6664 [Peter.Sylvester@EdelWeb.fr]
6666 *) Fix BN_mul_word for the case where the word is 0. (We have to use
6667 BN_zero, we may not return a BIGNUM with an array consisting of
6671 *) Avoid calling abort() from within the library when problems are
6672 detected, except if preprocessor symbols have been defined
6673 (such as REF_CHECK, BN_DEBUG etc.).
6676 *) New openssl application 'rsautl'. This utility can be
6677 used for low level RSA operations. DER public key
6678 BIO/fp routines also added.
6681 *) New Configure entry and patches for compiling on QNX 4.
6682 [Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
6684 *) A demo state-machine implementation was sponsored by
6685 Nuron (http://www.nuron.com/) and is now available in
6686 demos/state_machine.
6689 *) New options added to the 'dgst' utility for signature
6690 generation and verification.
6693 *) Unrecognized PKCS#7 content types are now handled via a
6694 catch all ASN1_TYPE structure. This allows unsupported
6695 types to be stored as a "blob" and an application can
6696 encode and decode it manually.
6699 *) Fix various signed/unsigned issues to make a_strex.c
6701 [Oscar Jacobsson <oscar.jacobsson@celocom.com>]
6703 *) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
6704 length if passed a buffer. ASN1_INTEGER_to_BN failed
6705 if passed a NULL BN and its argument was negative.
6706 [Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
6708 *) Modification to PKCS#7 encoding routines to output definite
6709 length encoding. Since currently the whole structures are in
6710 memory there's not real point in using indefinite length
6711 constructed encoding. However if OpenSSL is compiled with
6712 the flag PKCS7_INDEFINITE_ENCODING the old form is used.
6715 *) Added BIO_vprintf() and BIO_vsnprintf().
6718 *) Added more prefixes to parse for in the the strings written
6719 through a logging bio, to cover all the levels that are available
6720 through syslog. The prefixes are now:
6722 PANIC, EMERG, EMR => LOG_EMERG
6723 ALERT, ALR => LOG_ALERT
6724 CRIT, CRI => LOG_CRIT
6725 ERROR, ERR => LOG_ERR
6726 WARNING, WARN, WAR => LOG_WARNING
6727 NOTICE, NOTE, NOT => LOG_NOTICE
6728 INFO, INF => LOG_INFO
6729 DEBUG, DBG => LOG_DEBUG
6731 and as before, if none of those prefixes are present at the
6732 beginning of the string, LOG_ERR is chosen.
6734 On Win32, the LOG_* levels are mapped according to this:
6736 LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
6737 LOG_WARNING => EVENTLOG_WARNING_TYPE
6738 LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
6742 *) Made it possible to reconfigure with just the configuration
6743 argument "reconf" or "reconfigure". The command line arguments
6744 are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
6745 and are retrieved from there when reconfiguring.
6749 [Assar Westerlund <assar@sics.se>, Richard Levitte]
6751 *) Add the arguments -CAfile and -CApath to the pkcs12 utility.
6754 *) The obj_dat.pl script was messing up the sorting of object
6755 names. The reason was that it compared the quoted version
6756 of strings as a result "OCSP" > "OCSP Signing" because
6757 " > SPACE. Changed script to store unquoted versions of
6758 names and add quotes on output. It was also omitting some
6759 names from the lookup table if they were given a default
6760 value (that is if SN is missing it is given the same
6761 value as LN and vice versa), these are now added on the
6762 grounds that if an object has a name we should be able to
6763 look it up. Finally added warning output when duplicate
6764 short or long names are found.
6767 *) Changes needed for Tandem NSK.
6768 [Scott Uroff <scott@xypro.com>]
6770 *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
6771 RSA_padding_check_SSLv23(), special padding was never detected
6772 and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
6773 version rollback attacks was not effective.
6775 In s23_clnt.c, don't use special rollback-attack detection padding
6776 (RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
6777 client; similarly, in s23_srvr.c, don't do the rollback check if
6778 SSL 2.0 is the only protocol enabled in the server.
6781 *) Make it possible to get hexdumps of unprintable data with 'openssl
6782 asn1parse'. By implication, the functions ASN1_parse_dump() and
6783 BIO_dump_indent() are added.
6786 *) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
6787 these print out strings and name structures based on various
6788 flags including RFC2253 support and proper handling of
6789 multibyte characters. Added options to the 'x509' utility
6790 to allow the various flags to be set.
6793 *) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
6794 Also change the functions X509_cmp_current_time() and
6795 X509_gmtime_adj() work with an ASN1_TIME structure,
6796 this will enable certificates using GeneralizedTime in validity
6797 dates to be checked.
6800 *) Make the NEG_PUBKEY_BUG code (which tolerates invalid
6801 negative public key encodings) on by default,
6802 NO_NEG_PUBKEY_BUG can be set to disable it.
6805 *) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
6806 content octets. An i2c_ASN1_OBJECT is unnecessary because
6807 the encoding can be trivially obtained from the structure.
6810 *) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
6811 not read locks (CRYPTO_r_[un]lock).
6814 *) A first attempt at creating official support for shared
6815 libraries through configuration. I've kept it so the
6816 default is static libraries only, and the OpenSSL programs
6817 are always statically linked for now, but there are
6818 preparations for dynamic linking in place.
6819 This has been tested on Linux and Tru64.
6822 *) Randomness polling function for Win9x, as described in:
6823 Peter Gutmann, Software Generation of Practically Strong
6827 *) Fix so PRNG is seeded in req if using an already existing
6831 *) New options to smime application. -inform and -outform
6832 allow alternative formats for the S/MIME message including
6833 PEM and DER. The -content option allows the content to be
6834 specified separately. This should allow things like Netscape
6835 form signing output easier to verify.
6838 *) Fix the ASN1 encoding of tags using the 'long form'.
6841 *) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
6842 STRING types. These convert content octets to and from the
6843 underlying type. The actual tag and length octets are
6844 already assumed to have been read in and checked. These
6845 are needed because all other string types have virtually
6846 identical handling apart from the tag. By having versions
6847 of the ASN1 functions that just operate on content octets
6848 IMPLICIT tagging can be handled properly. It also allows
6849 the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
6850 and ASN1_INTEGER are identical apart from the tag.
6853 *) Change the handling of OID objects as follows:
6855 - New object identifiers are inserted in objects.txt, following
6856 the syntax given in objects.README.
6857 - objects.pl is used to process obj_mac.num and create a new
6859 - obj_dat.pl is used to create a new obj_dat.h, using the data in
6862 This is currently kind of a hack, and the perl code in objects.pl
6863 isn't very elegant, but it works as I intended. The simplest way
6864 to check that it worked correctly is to look in obj_dat.h and
6865 check the array nid_objs and make sure the objects haven't moved
6866 around (this is important!). Additions are OK, as well as
6867 consistent name changes.
6870 *) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
6873 *) Addition of the command line parameter '-rand file' to 'openssl req'.
6874 The given file adds to whatever has already been seeded into the
6875 random pool through the RANDFILE configuration file option or
6876 environment variable, or the default random state file.
6879 *) mkstack.pl now sorts each macro group into lexical order.
6880 Previously the output order depended on the order the files
6881 appeared in the directory, resulting in needless rewriting
6885 *) Patches to make OpenSSL compile under Win32 again. Mostly
6886 work arounds for the VC++ problem that it treats func() as
6887 func(void). Also stripped out the parts of mkdef.pl that
6888 added extra typesafe functions: these no longer exist.
6891 *) Reorganisation of the stack code. The macros are now all
6892 collected in safestack.h . Each macro is defined in terms of
6893 a "stack macro" of the form SKM_<name>(type, a, b). The
6894 DEBUG_SAFESTACK is now handled in terms of function casts,
6895 this has the advantage of retaining type safety without the
6896 use of additional functions. If DEBUG_SAFESTACK is not defined
6897 then the non typesafe macros are used instead. Also modified the
6898 mkstack.pl script to handle the new form. Needs testing to see
6899 if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
6900 the default if no major problems. Similar behaviour for ASN1_SET_OF
6901 and PKCS12_STACK_OF.
6904 *) When some versions of IIS use the 'NET' form of private key the
6905 key derivation algorithm is different. Normally MD5(password) is
6906 used as a 128 bit RC4 key. In the modified case
6907 MD5(MD5(password) + "SGCKEYSALT") is used insted. Added some
6908 new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
6909 as the old Netscape_RSA functions except they have an additional
6910 'sgckey' parameter which uses the modified algorithm. Also added
6911 an -sgckey command line option to the rsa utility. Thanks to
6912 Adrian Peck <bertie@ncipher.com> for posting details of the modified
6913 algorithm to openssl-dev.
6916 *) The evp_local.h macros were using 'c.##kname' which resulted in
6917 invalid expansion on some systems (SCO 5.0.5 for example).
6918 Corrected to 'c.kname'.
6919 [Phillip Porch <root@theporch.com>]
6921 *) New X509_get1_email() and X509_REQ_get1_email() functions that return
6922 a STACK of email addresses from a certificate or request, these look
6923 in the subject name and the subject alternative name extensions and
6924 omit any duplicate addresses.
6927 *) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
6928 This makes DSA verification about 2 % faster.
6931 *) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
6932 (meaning that now 2^5 values will be precomputed, which is only 4 KB
6933 plus overhead for 1024 bit moduli).
6934 This makes exponentiations about 0.5 % faster for 1024 bit
6935 exponents (as measured by "openssl speed rsa2048").
6938 *) Rename memory handling macros to avoid conflicts with other
6940 Malloc => OPENSSL_malloc
6941 Malloc_locked => OPENSSL_malloc_locked
6942 Realloc => OPENSSL_realloc
6943 Free => OPENSSL_free
6946 *) New function BN_mod_exp_mont_word for small bases (roughly 15%
6947 faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
6950 *) CygWin32 support.
6951 [John Jarvie <jjarvie@newsguy.com>]
6953 *) The type-safe stack code has been rejigged. It is now only compiled
6954 in when OpenSSL is configured with the DEBUG_SAFESTACK option and
6955 by default all type-specific stack functions are "#define"d back to
6956 standard stack functions. This results in more streamlined output
6957 but retains the type-safety checking possibilities of the original
6961 *) The STACK code has been cleaned up, and certain type declarations
6962 that didn't make a lot of sense have been brought in line. This has
6963 also involved a cleanup of sorts in safestack.h to more correctly
6964 map type-safe stack functions onto their plain stack counterparts.
6965 This work has also resulted in a variety of "const"ifications of
6966 lots of the code, especially "_cmp" operations which should normally
6967 be prototyped with "const" parameters anyway.
6970 *) When generating bytes for the first time in md_rand.c, 'stir the pool'
6971 by seeding with STATE_SIZE dummy bytes (with zero entropy count).
6972 (The PRNG state consists of two parts, the large pool 'state' and 'md',
6973 where all of 'md' is used each time the PRNG is used, but 'state'
6974 is used only indexed by a cyclic counter. As entropy may not be
6975 well distributed from the beginning, 'md' is important as a
6976 chaining variable. However, the output function chains only half
6977 of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
6978 all of 'md', and seeding with STATE_SIZE dummy bytes will result
6979 in all of 'state' being rewritten, with the new values depending
6980 on virtually all of 'md'. This overcomes the 80 bit limitation.)
6983 *) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
6984 the handshake is continued after ssl_verify_cert_chain();
6985 otherwise, if SSL_VERIFY_NONE is set, remaining error codes
6986 can lead to 'unexplainable' connection aborts later.
6987 [Bodo Moeller; problem tracked down by Lutz Jaenicke]
6989 *) Major EVP API cipher revision.
6990 Add hooks for extra EVP features. This allows various cipher
6991 parameters to be set in the EVP interface. Support added for variable
6992 key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
6993 setting of RC2 and RC5 parameters.
6995 Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
6998 Remove lots of duplicated code from the EVP library. For example *every*
6999 cipher init() function handles the 'iv' in the same way according to the
7000 cipher mode. They also all do nothing if the 'key' parameter is NULL and
7001 for CFB and OFB modes they zero ctx->num.
7003 New functionality allows removal of S/MIME code RC2 hack.
7005 Most of the routines have the same form and so can be declared in terms
7008 By shifting this to the top level EVP_CipherInit() it can be removed from
7009 all individual ciphers. If the cipher wants to handle IVs or keys
7010 differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
7013 Change lots of functions like EVP_EncryptUpdate() to now return a
7014 value: although software versions of the algorithms cannot fail
7015 any installed hardware versions can.
7018 *) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
7019 this option is set, tolerate broken clients that send the negotiated
7020 protocol version number instead of the requested protocol version
7024 *) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
7025 i.e. non-zero for export ciphersuites, zero otherwise.
7026 Previous versions had this flag inverted, inconsistent with
7027 rsa_tmp_cb (..._TMP_RSA_CB).
7028 [Bodo Moeller; problem reported by Amit Chopra]
7030 *) Add missing DSA library text string. Work around for some IIS
7031 key files with invalid SEQUENCE encoding.
7034 *) Add a document (doc/standards.txt) that list all kinds of standards
7035 and so on that are implemented in OpenSSL.
7038 *) Enhance c_rehash script. Old version would mishandle certificates
7039 with the same subject name hash and wouldn't handle CRLs at all.
7040 Added -fingerprint option to crl utility, to support new c_rehash
7044 *) Eliminate non-ANSI declarations in crypto.h and stack.h.
7047 *) Fix for SSL server purpose checking. Server checking was
7048 rejecting certificates which had extended key usage present
7049 but no ssl client purpose.
7050 [Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
7052 *) Make PKCS#12 code work with no password. The PKCS#12 spec
7053 is a little unclear about how a blank password is handled.
7054 Since the password in encoded as a BMPString with terminating
7055 double NULL a zero length password would end up as just the
7056 double NULL. However no password at all is different and is
7057 handled differently in the PKCS#12 key generation code. NS
7058 treats a blank password as zero length. MSIE treats it as no
7059 password on export: but it will try both on import. We now do
7060 the same: PKCS12_parse() tries zero length and no password if
7061 the password is set to "" or NULL (NULL is now a valid password:
7062 it wasn't before) as does the pkcs12 application.
7065 *) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
7066 perror when PEM_read_bio_X509_REQ fails, the error message must
7067 be obtained from the error queue.
7070 *) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
7071 it in ERR_remove_state if appropriate, and change ERR_get_state
7072 accordingly to avoid race conditions (this is necessary because
7073 thread_hash is no longer constant once set).
7076 *) Bugfix for linux-elf makefile.one.
7079 *) RSA_get_default_method() will now cause a default
7080 RSA_METHOD to be chosen if one doesn't exist already.
7081 Previously this was only set during a call to RSA_new()
7082 or RSA_new_method(NULL) meaning it was possible for
7083 RSA_get_default_method() to return NULL.
7086 *) Added native name translation to the existing DSO code
7087 that will convert (if the flag to do so is set) filenames
7088 that are sufficiently small and have no path information
7089 into a canonical native form. Eg. "blah" converted to
7090 "libblah.so" or "blah.dll" etc.
7093 *) New function ERR_error_string_n(e, buf, len) which is like
7094 ERR_error_string(e, buf), but writes at most 'len' bytes
7095 including the 0 terminator. For ERR_error_string_n, 'buf'
7097 [Damien Miller <djm@mindrot.org>, Bodo Moeller]
7099 *) CONF library reworked to become more general. A new CONF
7100 configuration file reader "class" is implemented as well as a
7101 new functions (NCONF_*, for "New CONF") to handle it. The now
7102 old CONF_* functions are still there, but are reimplemented to
7103 work in terms of the new functions. Also, a set of functions
7104 to handle the internal storage of the configuration data is
7105 provided to make it easier to write new configuration file
7106 reader "classes" (I can definitely see something reading a
7107 configuration file in XML format, for example), called _CONF_*,
7108 or "the configuration storage API"...
7110 The new configuration file reading functions are:
7112 NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
7113 NCONF_get_section, NCONF_get_string, NCONF_get_numbre
7115 NCONF_default, NCONF_WIN32
7117 NCONF_dump_fp, NCONF_dump_bio
7119 NCONF_default and NCONF_WIN32 are method (or "class") choosers,
7120 NCONF_new creates a new CONF object. This works in the same way
7121 as other interfaces in OpenSSL, like the BIO interface.
7122 NCONF_dump_* dump the internal storage of the configuration file,
7123 which is useful for debugging. All other functions take the same
7124 arguments as the old CONF_* functions wth the exception of the
7125 first that must be a `CONF *' instead of a `LHASH *'.
7127 To make it easer to use the new classes with the old CONF_* functions,
7128 the function CONF_set_default_method is provided.
7131 *) Add '-tls1' option to 'openssl ciphers', which was already
7132 mentioned in the documentation but had not been implemented.
7133 (This option is not yet really useful because even the additional
7134 experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
7137 *) Initial DSO code added into libcrypto for letting OpenSSL (and
7138 OpenSSL-based applications) load shared libraries and bind to
7139 them in a portable way.
7140 [Geoff Thorpe, with contributions from Richard Levitte]
7142 Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
7144 *) Make sure _lrotl and _lrotr are only used with MSVC.
7146 *) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
7147 (the default implementation of RAND_status).
7149 *) Rename openssl x509 option '-crlext', which was added in 0.9.5,
7150 to '-clrext' (= clear extensions), as intended and documented.
7151 [Bodo Moeller; inconsistency pointed out by Michael Attili
7154 *) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
7155 was larger than the MD block size.
7156 [Steve Henson, pointed out by Yost William <YostW@tce.com>]
7158 *) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
7159 fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
7160 using the passed key: if the passed key was a private key the result
7161 of X509_print(), for example, would be to print out all the private key
7165 *) des_quad_cksum() byte order bug fix.
7166 [Ulf Möller, using the problem description in krb4-0.9.7, where
7167 the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
7169 *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
7171 [Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
7173 *) For easily testing in shell scripts whether some command
7174 'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
7175 returns with exit code 0 iff no command of the given name is available.
7176 'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
7177 the output goes to stdout and nothing is printed to stderr.
7178 Additional arguments are always ignored.
7180 Since for each cipher there is a command of the same name,
7181 the 'no-cipher' compilation switches can be tested this way.
7183 ('openssl no-XXX' is not able to detect pseudo-commands such
7184 as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
7187 *) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
7190 *) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
7191 is set; it will be thrown away anyway because each handshake creates
7193 ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
7194 to parameters -- in previous versions (since OpenSSL 0.9.3) the
7195 'default key' from SSL_CTX_set_tmp_dh would always be lost, meanining
7196 you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
7199 *) New s_client option -ign_eof: EOF at stdin is ignored, and
7200 'Q' and 'R' lose their special meanings (quit/renegotiate).
7201 This is part of what -quiet does; unlike -quiet, -ign_eof
7202 does not suppress any output.
7205 *) Add compatibility options to the purpose and trust code. The
7206 purpose X509_PURPOSE_ANY is "any purpose" which automatically
7207 accepts a certificate or CA, this was the previous behaviour,
7208 with all the associated security issues.
7210 X509_TRUST_COMPAT is the old trust behaviour: only and
7211 automatically trust self signed roots in certificate store. A
7212 new trust setting X509_TRUST_DEFAULT is used to specify that
7213 a purpose has no associated trust setting and it should instead
7214 use the value in the default purpose.
7217 *) Fix the PKCS#8 DSA private key code so it decodes keys again
7218 and fix a memory leak.
7221 *) In util/mkerr.pl (which implements 'make errors'), preserve
7222 reason strings from the previous version of the .c file, as
7223 the default to have only downcase letters (and digits) in
7224 automatically generated reasons codes is not always appropriate.
7227 *) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
7228 using strerror. Previously, ERR_reason_error_string() returned
7229 library names as reason strings for SYSerr; but SYSerr is a special
7230 case where small numbers are errno values, not library numbers.
7233 *) Add '-dsaparam' option to 'openssl dhparam' application. This
7234 converts DSA parameters into DH parameters. (When creating parameters,
7235 DSA_generate_parameters is used.)
7238 *) Include 'length' (recommended exponent length) in C code generated
7239 by 'openssl dhparam -C'.
7242 *) The second argument to set_label in perlasm was already being used
7243 so couldn't be used as a "file scope" flag. Moved to third argument
7247 *) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
7248 instead of RAND_bytes for encryption IVs and salts.
7251 *) Include RAND_status() into RAND_METHOD instead of implementing
7252 it only for md_rand.c Otherwise replacing the PRNG by calling
7253 RAND_set_rand_method would be impossible.
7256 *) Don't let DSA_generate_key() enter an infinite loop if the random
7257 number generation fails.
7260 *) New 'rand' application for creating pseudo-random output.
7263 *) Added configuration support for Linux/IA64
7264 [Rolf Haberrecker <rolf@suse.de>]
7266 *) Assembler module support for Mingw32.
7269 *) Shared library support for HPUX (in shlib/).
7270 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
7272 *) Shared library support for Solaris gcc.
7273 [Lutz Behnke <behnke@trustcenter.de>]
7275 Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
7277 *) PKCS7_encrypt() was adding text MIME headers twice because they
7278 were added manually and by SMIME_crlf_copy().
7281 *) In bntest.c don't call BN_rand with zero bits argument.
7282 [Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
7284 *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
7285 case was implemented. This caused BN_div_recp() to fail occasionally.
7288 *) Add an optional second argument to the set_label() in the perl
7289 assembly language builder. If this argument exists and is set
7290 to 1 it signals that the assembler should use a symbol whose
7291 scope is the entire file, not just the current function. This
7292 is needed with MASM which uses the format label:: for this scope.
7293 [Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
7295 *) Change the ASN1 types so they are typedefs by default. Before
7296 almost all types were #define'd to ASN1_STRING which was causing
7297 STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
7301 *) Change names of new functions to the new get1/get0 naming
7302 convention: After 'get1', the caller owns a reference count
7303 and has to call ..._free; 'get0' returns a pointer to some
7304 data structure without incrementing reference counters.
7305 (Some of the existing 'get' functions increment a reference
7306 counter, some don't.)
7307 Similarly, 'set1' and 'add1' functions increase reference
7308 counters or duplicate objects.
7311 *) Allow for the possibility of temp RSA key generation failure:
7312 the code used to assume it always worked and crashed on failure.
7315 *) Fix potential buffer overrun problem in BIO_printf().
7316 [Ulf Möller, using public domain code by Patrick Powell; problem
7317 pointed out by David Sacerdote <das33@cornell.edu>]
7319 *) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
7320 RAND_egd() and RAND_status(). In the command line application,
7321 the EGD socket can be specified like a seed file using RANDFILE
7325 *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
7326 Some CAs (e.g. Verisign) distribute certificates in this form.
7329 *) Remove the SSL_ALLOW_ADH compile option and set the default cipher
7330 list to exclude them. This means that no special compilation option
7331 is needed to use anonymous DH: it just needs to be included in the
7335 *) Change the EVP_MD_CTX_type macro so its meaning consistent with
7336 EVP_MD_type. The old functionality is available in a new macro called
7337 EVP_MD_md(). Change code that uses it and update docs.
7340 *) ..._ctrl functions now have corresponding ..._callback_ctrl functions
7341 where the 'void *' argument is replaced by a function pointer argument.
7342 Previously 'void *' was abused to point to functions, which works on
7343 many platforms, but is not correct. As these functions are usually
7344 called by macros defined in OpenSSL header files, most source code
7345 should work without changes.
7348 *) <openssl/opensslconf.h> (which is created by Configure) now contains
7349 sections with information on -D... compiler switches used for
7350 compiling the library so that applications can see them. To enable
7351 one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
7352 must be defined. E.g.,
7353 #define OPENSSL_ALGORITHM_DEFINES
7354 #include <openssl/opensslconf.h>
7355 defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
7356 [Richard Levitte, Ulf and Bodo Möller]
7358 *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
7362 *) Change the 'other' type in certificate aux info to a STACK_OF
7363 X509_ALGOR. Although not an AlgorithmIdentifier as such it has
7364 the required ASN1 format: arbitrary types determined by an OID.
7367 *) Add some PEM_write_X509_REQ_NEW() functions and a command line
7368 argument to 'req'. This is not because the function is newer or
7369 better than others it just uses the work 'NEW' in the certificate
7370 request header lines. Some software needs this.
7373 *) Reorganise password command line arguments: now passwords can be
7374 obtained from various sources. Delete the PEM_cb function and make
7375 it the default behaviour: i.e. if the callback is NULL and the
7376 usrdata argument is not NULL interpret it as a null terminated pass
7377 phrase. If usrdata and the callback are NULL then the pass phrase
7378 is prompted for as usual.
7381 *) Add support for the Compaq Atalla crypto accelerator. If it is installed,
7382 the support is automatically enabled. The resulting binaries will
7383 autodetect the card and use it if present.
7384 [Ben Laurie and Compaq Inc.]
7386 *) Work around for Netscape hang bug. This sends certificate request
7387 and server done in one record. Since this is perfectly legal in the
7388 SSL/TLS protocol it isn't a "bug" option and is on by default. See
7389 the bugs/SSLv3 entry for more info.
7392 *) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
7395 *) Add -rand argument to smime and pkcs12 applications and read/write
7399 *) New 'passwd' tool for crypt(3) and apr1 password hashes.
7402 *) Add command line password options to the remaining applications.
7405 *) Bug fix for BN_div_recp() for numerators with an even number of
7409 *) More tests in bntest.c, and changed test_bn output.
7412 *) ./config recognizes MacOS X now.
7415 *) Bug fix for BN_div() when the first words of num and divsor are
7416 equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
7419 *) Add support for various broken PKCS#8 formats, and command line
7420 options to produce them.
7423 *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
7424 get temporary BIGNUMs from a BN_CTX.
7427 *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
7431 *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
7432 include a #define from the old name to the new. The original intent
7433 was that statically linked binaries could for example just call
7434 SSLeay_add_all_ciphers() to just add ciphers to the table and not
7435 link with digests. This never worked becayse SSLeay_add_all_digests()
7436 and SSLeay_add_all_ciphers() were in the same source file so calling
7437 one would link with the other. They are now in separate source files.
7440 *) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
7443 *) Use a less unusual form of the Miller-Rabin primality test (it used
7444 a binary algorithm for exponentiation integrated into the Miller-Rabin
7445 loop, our standard modexp algorithms are faster).
7448 *) Support for the EBCDIC character set completed.
7449 [Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
7451 *) Source code cleanups: use const where appropriate, eliminate casts,
7452 use void * instead of char * in lhash.
7455 *) Bugfix: ssl3_send_server_key_exchange was not restartable
7456 (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
7457 this the server could overwrite ephemeral keys that the client
7461 *) Turn DSA_is_prime into a macro that calls BN_is_prime,
7462 using 50 iterations of the Rabin-Miller test.
7464 DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
7465 iterations of the Rabin-Miller test as required by the appendix
7466 to FIPS PUB 186[-1]) instead of DSA_is_prime.
7467 As BN_is_prime_fasttest includes trial division, DSA parameter
7468 generation becomes much faster.
7470 This implies a change for the callback functions in DSA_is_prime
7471 and DSA_generate_parameters: The callback function is called once
7472 for each positive witness in the Rabin-Miller test, not just
7473 occasionally in the inner loop; and the parameters to the
7474 callback function now provide an iteration count for the outer
7475 loop rather than for the current invocation of the inner loop.
7476 DSA_generate_parameters additionally can call the callback
7477 function with an 'iteration count' of -1, meaning that a
7478 candidate has passed the trial division test (when q is generated
7479 from an application-provided seed, trial division is skipped).
7482 *) New function BN_is_prime_fasttest that optionally does trial
7483 division before starting the Rabin-Miller test and has
7484 an additional BN_CTX * argument (whereas BN_is_prime always
7485 has to allocate at least one BN_CTX).
7486 'callback(1, -1, cb_arg)' is called when a number has passed the
7487 trial division stage.
7490 *) Fix for bug in CRL encoding. The validity dates weren't being handled
7494 *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
7497 *) New function BN_pseudo_rand().
7500 *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
7501 bignum version of BN_from_montgomery() with the working code from
7502 SSLeay 0.9.0 (the word based version is faster anyway), and clean up
7506 *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
7507 made it impossible to use the same SSL_SESSION data structure in
7508 SSL2 clients in multiple threads.
7511 *) The return value of RAND_load_file() no longer counts bytes obtained
7512 by stat(). RAND_load_file(..., -1) is new and uses the complete file
7513 to seed the PRNG (previously an explicit byte count was required).
7514 [Ulf Möller, Bodo Möller]
7516 *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
7517 used (char *) instead of (void *) and had casts all over the place.
7520 *) Make BN_generate_prime() return NULL on error if ret!=NULL.
7523 *) Retain source code compatibility for BN_prime_checks macro:
7524 BN_is_prime(..., BN_prime_checks, ...) now uses
7525 BN_prime_checks_for_size to determine the appropriate number of
7526 Rabin-Miller iterations.
7529 *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
7530 DH_CHECK_P_NOT_SAFE_PRIME.
7531 (Check if this is true? OpenPGP calls them "strong".)
7534 *) Merge the functionality of "dh" and "gendh" programs into a new program
7535 "dhparam". The old programs are retained for now but will handle DH keys
7536 (instead of parameters) in future.
7539 *) Make the ciphers, s_server and s_client programs check the return values
7540 when a new cipher list is set.
7543 *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
7544 ciphers. Before when the 56bit ciphers were enabled the sorting was
7547 The syntax for the cipher sorting has been extended to support sorting by
7548 cipher-strength (using the strength_bits hard coded in the tables).
7549 The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
7551 Fix a bug in the cipher-command parser: when supplying a cipher command
7552 string with an "undefined" symbol (neither command nor alphanumeric
7553 [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
7554 an error is flagged.
7556 Due to the strength-sorting extension, the code of the
7557 ssl_create_cipher_list() function was completely rearranged. I hope that
7558 the readability was also increased :-)
7559 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
7561 *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
7562 for the first serial number and places 2 in the serial number file. This
7563 avoids problems when the root CA is created with serial number zero and
7564 the first user certificate has the same issuer name and serial number
7568 *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
7569 the new code. Add documentation for this stuff.
7572 *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
7573 X509_*() to X509at_*() on the grounds that they don't handle X509
7574 structures and behave in an analagous way to the X509v3 functions:
7575 they shouldn't be called directly but wrapper functions should be used
7578 So we also now have some wrapper functions that call the X509at functions
7579 when passed certificate requests. (TO DO: similar things can be done with
7580 PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
7581 things. Some of these need some d2i or i2d and print functionality
7582 because they handle more complex structures.)
7585 *) Add missing #ifndefs that caused missing symbols when building libssl
7586 as a shared library without RSA. Use #ifndef NO_SSL2 instead of
7587 NO_RSA in ssl/s2*.c.
7588 [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
7590 *) Precautions against using the PRNG uninitialized: RAND_bytes() now
7591 has a return value which indicates the quality of the random data
7592 (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
7593 error queue. New function RAND_pseudo_bytes() generates output that is
7594 guaranteed to be unique but not unpredictable. RAND_add is like
7595 RAND_seed, but takes an extra argument for an entropy estimate
7596 (RAND_seed always assumes full entropy).
7599 *) Do more iterations of Rabin-Miller probable prime test (specifically,
7600 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
7601 instead of only 2 for all lengths; see BN_prime_checks_for_size definition
7602 in crypto/bn/bn_prime.c for the complete table). This guarantees a
7603 false-positive rate of at most 2^-80 for random input.
7606 *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
7609 *) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
7610 in the 0.9.5 release), this returns the chain
7611 from an X509_CTX structure with a dup of the stack and all
7612 the X509 reference counts upped: so the stack will exist
7613 after X509_CTX_cleanup() has been called. Modify pkcs12.c
7616 Also make SSL_SESSION_print() print out the verify return
7620 *) Add manpage for the pkcs12 command. Also change the default
7621 behaviour so MAC iteration counts are used unless the new
7622 -nomaciter option is used. This improves file security and
7623 only older versions of MSIE (4.0 for example) need it.
7626 *) Honor the no-xxx Configure options when creating .DEF files.
7629 *) Add PKCS#10 attributes to field table: challengePassword,
7630 unstructuredName and unstructuredAddress. These are taken from
7631 draft PKCS#9 v2.0 but are compatible with v1.2 provided no
7632 international characters are used.
7634 More changes to X509_ATTRIBUTE code: allow the setting of types
7635 based on strings. Remove the 'loc' parameter when adding
7636 attributes because these will be a SET OF encoding which is sorted
7640 *) Initial changes to the 'req' utility to allow request generation
7641 automation. This will allow an application to just generate a template
7642 file containing all the field values and have req construct the
7645 Initial support for X509_ATTRIBUTE handling. Stacks of these are
7646 used all over the place including certificate requests and PKCS#7
7647 structures. They are currently handled manually where necessary with
7648 some primitive wrappers for PKCS#7. The new functions behave in a
7649 manner analogous to the X509 extension functions: they allow
7650 attributes to be looked up by NID and added.
7652 Later something similar to the X509V3 code would be desirable to
7653 automatically handle the encoding, decoding and printing of the
7654 more complex types. The string types like challengePassword can
7655 be handled by the string table functions.
7657 Also modified the multi byte string table handling. Now there is
7658 a 'global mask' which masks out certain types. The table itself
7659 can use the flag STABLE_NO_MASK to ignore the mask setting: this
7660 is useful when for example there is only one permissible type
7661 (as in countryName) and using the mask might result in no valid
7665 *) Clean up 'Finished' handling, and add functions SSL_get_finished and
7666 SSL_get_peer_finished to allow applications to obtain the latest
7667 Finished messages sent to the peer or expected from the peer,
7668 respectively. (SSL_get_peer_finished is usually the Finished message
7669 actually received from the peer, otherwise the protocol will be aborted.)
7671 As the Finished message are message digests of the complete handshake
7672 (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
7673 be used for external authentication procedures when the authentication
7674 provided by SSL/TLS is not desired or is not enough.
7677 *) Enhanced support for Alpha Linux is added. Now ./config checks if
7678 the host supports BWX extension and if Compaq C is present on the
7679 $PATH. Just exploiting of the BWX extension results in 20-30%
7680 performance kick for some algorithms, e.g. DES and RC4 to mention
7681 a couple. Compaq C in turn generates ~20% faster code for MD5 and
7685 *) Add support for MS "fast SGC". This is arguably a violation of the
7686 SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
7687 weak crypto and after checking the certificate is SGC a second one
7688 with strong crypto. MS SGC stops the first handshake after receiving
7689 the server certificate message and sends a second client hello. Since
7690 a server will typically do all the time consuming operations before
7691 expecting any further messages from the client (server key exchange
7692 is the most expensive) there is little difference between the two.
7694 To get OpenSSL to support MS SGC we have to permit a second client
7695 hello message after we have sent server done. In addition we have to
7696 reset the MAC if we do get this second client hello.
7699 *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
7700 if a DER encoded private key is RSA or DSA traditional format. Changed
7701 d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
7702 format DER encoded private key. Newer code should use PKCS#8 format which
7703 has the key type encoded in the ASN1 structure. Added DER private key
7704 support to pkcs8 application.
7707 *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
7708 ciphersuites has been selected (as required by the SSL 3/TLS 1
7709 specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
7710 is set, we interpret this as a request to violate the specification
7711 (the worst that can happen is a handshake failure, and 'correct'
7712 behaviour would result in a handshake failure anyway).
7715 *) In SSL_CTX_add_session, take into account that there might be multiple
7716 SSL_SESSION structures with the same session ID (e.g. when two threads
7717 concurrently obtain them from an external cache).
7718 The internal cache can handle only one SSL_SESSION with a given ID,
7719 so if there's a conflict, we now throw out the old one to achieve
7723 *) Add OIDs for idea and blowfish in CBC mode. This will allow both
7724 to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
7725 some routines that use cipher OIDs: some ciphers do not have OIDs
7726 defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
7730 *) Simplify the trust setting structure and code. Now we just have
7731 two sequences of OIDs for trusted and rejected settings. These will
7732 typically have values the same as the extended key usage extension
7733 and any application specific purposes.
7735 The trust checking code now has a default behaviour: it will just
7736 check for an object with the same NID as the passed id. Functions can
7737 be provided to override either the default behaviour or the behaviour
7738 for a given id. SSL client, server and email already have functions
7739 in place for compatibility: they check the NID and also return "trusted"
7740 if the certificate is self signed.
7743 *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
7744 traditional format into an EVP_PKEY structure.
7747 *) Add a password callback function PEM_cb() which either prompts for
7748 a password if usr_data is NULL or otherwise assumes it is a null
7749 terminated password. Allow passwords to be passed on command line
7750 environment or config files in a few more utilities.
7753 *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
7754 keys. Add some short names for PKCS#8 PBE algorithms and allow them
7755 to be specified on the command line for the pkcs8 and pkcs12 utilities.
7756 Update documentation.
7759 *) Support for ASN1 "NULL" type. This could be handled before by using
7760 ASN1_TYPE but there wasn't any function that would try to read a NULL
7761 and produce an error if it couldn't. For compatibility we also have
7762 ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
7763 don't allocate anything because they don't need to.
7766 *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
7768 [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
7770 *) Rebuild of the memory allocation routines used by OpenSSL code and
7771 possibly others as well. The purpose is to make an interface that
7772 provide hooks so anyone can build a separate set of allocation and
7773 deallocation routines to be used by OpenSSL, for example memory
7774 pool implementations, or something else, which was previously hard
7775 since Malloc(), Realloc() and Free() were defined as macros having
7776 the values malloc, realloc and free, respectively (except for Win32
7777 compilations). The same is provided for memory debugging code.
7778 OpenSSL already comes with functionality to find memory leaks, but
7779 this gives people a chance to debug other memory problems.
7781 With these changes, a new set of functions and macros have appeared:
7783 CRYPTO_set_mem_debug_functions() [F]
7784 CRYPTO_get_mem_debug_functions() [F]
7785 CRYPTO_dbg_set_options() [F]
7786 CRYPTO_dbg_get_options() [F]
7787 CRYPTO_malloc_debug_init() [M]
7789 The memory debug functions are NULL by default, unless the library
7790 is compiled with CRYPTO_MDEBUG or friends is defined. If someone
7791 wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
7792 gives the standard debugging functions that come with OpenSSL) or
7793 CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
7794 provided by the library user) must be used. When the standard
7795 debugging functions are used, CRYPTO_dbg_set_options can be used to
7796 request additional information:
7797 CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
7798 the CRYPTO_MDEBUG_xxx macro when compiling the library.
7800 Also, things like CRYPTO_set_mem_functions will always give the
7801 expected result (the new set of functions is used for allocation
7802 and deallocation) at all times, regardless of platform and compiler
7805 To finish it up, some functions that were never use in any other
7806 way than through macros have a new API and new semantic:
7809 CRYPTO_dbg_realloc()
7812 All macros of value have retained their old syntax.
7813 [Richard Levitte and Bodo Moeller]
7815 *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
7816 ordering of SMIMECapabilities wasn't in "strength order" and there
7817 was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
7821 *) Some ASN1 types with illegal zero length encoding (INTEGER,
7822 ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
7823 [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
7825 *) Merge in my S/MIME library for OpenSSL. This provides a simple
7826 S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
7827 functionality to handle multipart/signed properly) and a utility
7828 called 'smime' to call all this stuff. This is based on code I
7829 originally wrote for Celo who have kindly allowed it to be
7830 included in OpenSSL.
7833 *) Add variants des_set_key_checked and des_set_key_unchecked of
7834 des_set_key (aka des_key_sched). Global variable des_check_key
7835 decides which of these is called by des_set_key; this way
7836 des_check_key behaves as it always did, but applications and
7837 the library itself, which was buggy for des_check_key == 1,
7838 have a cleaner way to pick the version they need.
7841 *) New function PKCS12_newpass() which changes the password of a
7845 *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
7846 dynamic mix. In both cases the ids can be used as an index into the
7847 table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
7848 functions so they accept a list of the field values and the
7849 application doesn't need to directly manipulate the X509_TRUST
7853 *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
7857 *) Modify the way the V3 extension code looks up extensions. This now
7858 works in a similar way to the object code: we have some "standard"
7859 extensions in a static table which is searched with OBJ_bsearch()
7860 and the application can add dynamic ones if needed. The file
7861 crypto/x509v3/ext_dat.h now has the info: this file needs to be
7862 updated whenever a new extension is added to the core code and kept
7863 in ext_nid order. There is a simple program 'tabtest.c' which checks
7864 this. New extensions are not added too often so this file can readily
7865 be maintained manually.
7867 There are two big advantages in doing things this way. The extensions
7868 can be looked up immediately and no longer need to be "added" using
7869 X509V3_add_standard_extensions(): this function now does nothing.
7870 [Side note: I get *lots* of email saying the extension code doesn't
7871 work because people forget to call this function]
7872 Also no dynamic allocation is done unless new extensions are added:
7873 so if we don't add custom extensions there is no need to call
7874 X509V3_EXT_cleanup().
7877 *) Modify enc utility's salting as follows: make salting the default. Add a
7878 magic header, so unsalted files fail gracefully instead of just decrypting
7879 to garbage. This is because not salting is a big security hole, so people
7880 should be discouraged from doing it.
7883 *) Fixes and enhancements to the 'x509' utility. It allowed a message
7884 digest to be passed on the command line but it only used this
7885 parameter when signing a certificate. Modified so all relevant
7886 operations are affected by the digest parameter including the
7887 -fingerprint and -x509toreq options. Also -x509toreq choked if a
7888 DSA key was used because it didn't fix the digest.
7891 *) Initial certificate chain verify code. Currently tests the untrusted
7892 certificates for consistency with the verify purpose (which is set
7893 when the X509_STORE_CTX structure is set up) and checks the pathlength.
7895 There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
7896 this is because it will reject chains with invalid extensions whereas
7897 every previous version of OpenSSL and SSLeay made no checks at all.
7899 Trust code: checks the root CA for the relevant trust settings. Trust
7900 settings have an initial value consistent with the verify purpose: e.g.
7901 if the verify purpose is for SSL client use it expects the CA to be
7902 trusted for SSL client use. However the default value can be changed to
7903 permit custom trust settings: one example of this would be to only trust
7904 certificates from a specific "secure" set of CAs.
7906 Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
7907 which should be used for version portability: especially since the
7908 verify structure is likely to change more often now.
7910 SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
7911 to set them. If not set then assume SSL clients will verify SSL servers
7914 Two new options to the verify program: -untrusted allows a set of
7915 untrusted certificates to be passed in and -purpose which sets the
7916 intended purpose of the certificate. If a purpose is set then the
7917 new chain verify code is used to check extension consistency.
7920 *) Support for the authority information access extension.
7923 *) Modify RSA and DSA PEM read routines to transparently handle
7924 PKCS#8 format private keys. New *_PUBKEY_* functions that handle
7925 public keys in a format compatible with certificate
7926 SubjectPublicKeyInfo structures. Unfortunately there were already
7927 functions called *_PublicKey_* which used various odd formats so
7928 these are retained for compatibility: however the DSA variants were
7929 never in a public release so they have been deleted. Changed dsa/rsa
7930 utilities to handle the new format: note no releases ever handled public
7931 keys so we should be OK.
7933 The primary motivation for this change is to avoid the same fiasco
7934 that dogs private keys: there are several incompatible private key
7935 formats some of which are standard and some OpenSSL specific and
7936 require various evil hacks to allow partial transparent handling and
7937 even then it doesn't work with DER formats. Given the option anything
7938 other than PKCS#8 should be dumped: but the other formats have to
7939 stay in the name of compatibility.
7941 With public keys and the benefit of hindsight one standard format
7942 is used which works with EVP_PKEY, RSA or DSA structures: though
7943 it clearly returns an error if you try to read the wrong kind of key.
7945 Added a -pubkey option to the 'x509' utility to output the public key.
7946 Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
7947 (renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
7948 EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
7949 that do the same as the EVP_PKEY_assign_*() except they up the
7950 reference count of the added key (they don't "swallow" the
7954 *) Fixes to crypto/x509/by_file.c the code to read in certificates and
7955 CRLs would fail if the file contained no certificates or no CRLs:
7956 added a new function to read in both types and return the number
7957 read: this means that if none are read it will be an error. The
7958 DER versions of the certificate and CRL reader would always fail
7959 because it isn't possible to mix certificates and CRLs in DER format
7960 without choking one or the other routine. Changed this to just read
7961 a certificate: this is the best we can do. Also modified the code
7962 in apps/verify.c to take notice of return codes: it was previously
7963 attempting to read in certificates from NULL pointers and ignoring
7964 any errors: this is one reason why the cert and CRL reader seemed
7965 to work. It doesn't check return codes from the default certificate
7966 routines: these may well fail if the certificates aren't installed.
7969 *) Code to support otherName option in GeneralName.
7972 *) First update to verify code. Change the verify utility
7973 so it warns if it is passed a self signed certificate:
7974 for consistency with the normal behaviour. X509_verify
7975 has been modified to it will now verify a self signed
7976 certificate if *exactly* the same certificate appears
7977 in the store: it was previously impossible to trust a
7978 single self signed certificate. This means that:
7979 openssl verify ss.pem
7980 now gives a warning about a self signed certificate but
7981 openssl verify -CAfile ss.pem ss.pem
7985 *) For servers, store verify_result in SSL_SESSION data structure
7986 (and add it to external session representation).
7987 This is needed when client certificate verifications fails,
7988 but an application-provided verification callback (set by
7989 SSL_CTX_set_cert_verify_callback) allows accepting the session
7990 anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
7991 but returns 1): When the session is reused, we have to set
7992 ssl->verify_result to the appropriate error code to avoid
7994 [Bodo Moeller, problem pointed out by Lutz Jaenicke]
7996 *) Fix a bug in the new PKCS#7 code: it didn't consider the
7997 case in PKCS7_dataInit() where the signed PKCS7 structure
7998 didn't contain any existing data because it was being created.
7999 [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
8001 *) Add a salt to the key derivation routines in enc.c. This
8002 forms the first 8 bytes of the encrypted file. Also add a
8003 -S option to allow a salt to be input on the command line.
8006 *) New function X509_cmp(). Oddly enough there wasn't a function
8007 to compare two certificates. We do this by working out the SHA1
8008 hash and comparing that. X509_cmp() will be needed by the trust
8012 *) SSL_get1_session() is like SSL_get_session(), but increments
8013 the reference count in the SSL_SESSION returned.
8014 [Geoff Thorpe <geoff@eu.c2.net>]
8016 *) Fix for 'req': it was adding a null to request attributes.
8017 Also change the X509_LOOKUP and X509_INFO code to handle
8018 certificate auxiliary information.
8021 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
8025 *) Add the possibility to add extra information to the memory leak
8026 detecting output, to form tracebacks, showing from where each
8027 allocation was originated: CRYPTO_push_info("constant string") adds
8028 the string plus current file name and line number to a per-thread
8029 stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
8030 is like calling CYRPTO_pop_info() until the stack is empty.
8031 Also updated memory leak detection code to be multi-thread-safe.
8034 *) Add options -text and -noout to pkcs7 utility and delete the
8035 encryption options which never did anything. Update docs.
8038 *) Add options to some of the utilities to allow the pass phrase
8039 to be included on either the command line (not recommended on
8040 OSes like Unix) or read from the environment. Update the
8041 manpages and fix a few bugs.
8044 *) Add a few manpages for some of the openssl commands.
8047 *) Fix the -revoke option in ca. It was freeing up memory twice,
8048 leaking and not finding already revoked certificates.
8051 *) Extensive changes to support certificate auxiliary information.
8052 This involves the use of X509_CERT_AUX structure and X509_AUX
8053 functions. An X509_AUX function such as PEM_read_X509_AUX()
8054 can still read in a certificate file in the usual way but it
8055 will also read in any additional "auxiliary information". By
8056 doing things this way a fair degree of compatibility can be
8057 retained: existing certificates can have this information added
8058 using the new 'x509' options.
8060 Current auxiliary information includes an "alias" and some trust
8061 settings. The trust settings will ultimately be used in enhanced
8062 certificate chain verification routines: currently a certificate
8063 can only be trusted if it is self signed and then it is trusted
8067 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
8068 The problem was that one of the replacement routines had not been working
8069 since SSLeay releases. For now the offending routine has been replaced
8070 with non-optimised assembler. Even so, this now gives around 95%
8071 performance improvement for 1024 bit RSA signs.
8074 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
8075 handling. Most clients have the effective key size in bits equal to
8076 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
8077 A few however don't do this and instead use the size of the decrypted key
8078 to determine the RC2 key length and the AlgorithmIdentifier to determine
8079 the effective key length. In this case the effective key length can still
8080 be 40 bits but the key length can be 168 bits for example. This is fixed
8081 by manually forcing an RC2 key into the EVP_PKEY structure because the
8082 EVP code can't currently handle unusual RC2 key sizes: it always assumes
8083 the key length and effective key length are equal.
8086 *) Add a bunch of functions that should simplify the creation of
8087 X509_NAME structures. Now you should be able to do:
8088 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
8089 and have it automatically work out the correct field type and fill in
8090 the structures. The more adventurous can try:
8091 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
8092 and it will (hopefully) work out the correct multibyte encoding.
8095 *) Change the 'req' utility to use the new field handling and multibyte
8096 copy routines. Before the DN field creation was handled in an ad hoc
8097 way in req, ca, and x509 which was rather broken and didn't support
8098 BMPStrings or UTF8Strings. Since some software doesn't implement
8099 BMPStrings or UTF8Strings yet, they can be enabled using the config file
8100 using the dirstring_type option. See the new comment in the default
8101 openssl.cnf for more info.
8104 *) Make crypto/rand/md_rand.c more robust:
8105 - Assure unique random numbers after fork().
8106 - Make sure that concurrent threads access the global counter and
8107 md serializably so that we never lose entropy in them
8108 or use exactly the same state in multiple threads.
8109 Access to the large state is not always serializable because
8110 the additional locking could be a performance killer, and
8111 md should be large enough anyway.
8114 *) New file apps/app_rand.c with commonly needed functionality
8115 for handling the random seed file.
8117 Use the random seed file in some applications that previously did not:
8119 dsaparam -genkey (which also ignored its '-rand' option),
8122 x509 (when signing).
8123 Except on systems with /dev/urandom, it is crucial to have a random
8124 seed file at least for key creation, DSA signing, and for DH exchanges;
8125 for RSA signatures we could do without one.
8127 gendh and gendsa (unlike genrsa) used to read only the first byte
8128 of each file listed in the '-rand' option. The function as previously
8129 found in genrsa is now in app_rand.c and is used by all programs
8130 that support '-rand'.
8133 *) In RAND_write_file, use mode 0600 for creating files;
8134 don't just chmod when it may be too late.
8137 *) Report an error from X509_STORE_load_locations
8138 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
8141 *) New function ASN1_mbstring_copy() this copies a string in either
8142 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
8143 into an ASN1_STRING type. A mask of permissible types is passed
8144 and it chooses the "minimal" type to use or an error if not type
8148 *) Add function equivalents to the various macros in asn1.h. The old
8149 macros are retained with an M_ prefix. Code inside the library can
8150 use the M_ macros. External code (including the openssl utility)
8151 should *NOT* in order to be "shared library friendly".
8154 *) Add various functions that can check a certificate's extensions
8155 to see if it usable for various purposes such as SSL client,
8156 server or S/MIME and CAs of these types. This is currently
8157 VERY EXPERIMENTAL but will ultimately be used for certificate chain
8158 verification. Also added a -purpose flag to x509 utility to
8159 print out all the purposes.
8162 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
8166 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
8167 for, obtain and decode and extension and obtain its critical flag.
8168 This allows all the necessary extension code to be handled in a
8169 single function call.
8172 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
8173 platforms. See crypto/rc4/rc4_enc.c for further details.
8176 *) New -noout option to asn1parse. This causes no output to be produced
8177 its main use is when combined with -strparse and -out to extract data
8178 from a file (which may not be in ASN.1 format).
8181 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
8182 when producing the local key id.
8183 [Richard Levitte <levitte@stacken.kth.se>]
8185 *) New option -dhparam in s_server. This allows a DH parameter file to be
8186 stated explicitly. If it is not stated then it tries the first server
8187 certificate file. The previous behaviour hard coded the filename
8191 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
8192 a public key to be input or output. For example:
8193 openssl rsa -in key.pem -pubout -out pubkey.pem
8194 Also added necessary DSA public key functions to handle this.
8197 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
8198 in the message. This was handled by allowing
8199 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
8200 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
8202 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
8203 to the end of the strings whereas this didn't. This would cause problems
8204 if strings read with d2i_ASN1_bytes() were later modified.
8205 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
8207 *) Fix for base64 decode bug. When a base64 bio reads only one line of
8208 data and it contains EOF it will end up returning an error. This is
8209 caused by input 46 bytes long. The cause is due to the way base64
8210 BIOs find the start of base64 encoded data. They do this by trying a
8211 trial decode on each line until they find one that works. When they
8212 do a flag is set and it starts again knowing it can pass all the
8213 data directly through the decoder. Unfortunately it doesn't reset
8214 the context it uses. This means that if EOF is reached an attempt
8215 is made to pass two EOFs through the context and this causes the
8216 resulting error. This can also cause other problems as well. As is
8217 usual with these problems it takes *ages* to find and the fix is
8218 trivial: move one line.
8219 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
8221 *) Ugly workaround to get s_client and s_server working under Windows. The
8222 old code wouldn't work because it needed to select() on sockets and the
8223 tty (for keypresses and to see if data could be written). Win32 only
8224 supports select() on sockets so we select() with a 1s timeout on the
8225 sockets and then see if any characters are waiting to be read, if none
8226 are present then we retry, we also assume we can always write data to
8227 the tty. This isn't nice because the code then blocks until we've
8228 received a complete line of data and it is effectively polling the
8229 keyboard at 1s intervals: however it's quite a bit better than not
8230 working at all :-) A dedicated Windows application might handle this
8231 with an event loop for example.
8234 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
8235 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
8236 will be called when RSA_sign() and RSA_verify() are used. This is useful
8237 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
8238 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
8239 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
8240 This necessitated the support of an extra signature type NID_md5_sha1
8241 for SSL signatures and modifications to the SSL library to use it instead
8242 of calling RSA_public_decrypt() and RSA_private_encrypt().
8245 *) Add new -verify -CAfile and -CApath options to the crl program, these
8246 will lookup a CRL issuers certificate and verify the signature in a
8247 similar way to the verify program. Tidy up the crl program so it
8248 no longer accesses structures directly. Make the ASN1 CRL parsing a bit
8249 less strict. It will now permit CRL extensions even if it is not
8250 a V2 CRL: this will allow it to tolerate some broken CRLs.
8253 *) Initialize all non-automatic variables each time one of the openssl
8254 sub-programs is started (this is necessary as they may be started
8255 multiple times from the "OpenSSL>" prompt).
8256 [Lennart Bang, Bodo Moeller]
8258 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
8259 removing all other RSA functionality (this is what NO_RSA does). This
8260 is so (for example) those in the US can disable those operations covered
8261 by the RSA patent while allowing storage and parsing of RSA keys and RSA
8265 *) Non-copying interface to BIO pairs.
8266 (still largely untested)
8269 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
8270 ASCII string. This was handled independently in various places before.
8273 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
8274 UTF8 strings a character at a time.
8277 *) Use client_version from client hello to select the protocol
8278 (s23_srvr.c) and for RSA client key exchange verification
8279 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
8282 *) Add various utility functions to handle SPKACs, these were previously
8283 handled by poking round in the structure internals. Added new function
8284 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
8285 print, verify and generate SPKACs. Based on an original idea from
8286 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
8289 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
8292 *) Allow the config file extension section to be overwritten on the
8293 command line. Based on an original idea from Massimiliano Pala
8294 <madwolf@comune.modena.it>. The new option is called -extensions
8295 and can be applied to ca, req and x509. Also -reqexts to override
8296 the request extensions in req and -crlexts to override the crl extensions
8300 *) Add new feature to the SPKAC handling in ca. Now you can include
8301 the same field multiple times by preceding it by "XXXX." for example:
8304 this is the same syntax as used in the req config file.
8307 *) Allow certificate extensions to be added to certificate requests. These
8308 are specified in a 'req_extensions' option of the req section of the
8309 config file. They can be printed out with the -text option to req but
8310 are otherwise ignored at present.
8313 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
8314 data read consists of only the final block it would not decrypted because
8315 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
8316 A misplaced 'break' also meant the decrypted final block might not be
8317 copied until the next read.
8320 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
8321 a few extra parameters to the DH structure: these will be useful if
8322 for example we want the value of 'q' or implement X9.42 DH.
8325 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
8326 provides hooks that allow the default DSA functions or functions on a
8327 "per key" basis to be replaced. This allows hardware acceleration and
8328 hardware key storage to be handled without major modification to the
8329 library. Also added low level modexp hooks and CRYPTO_EX structure and
8330 associated functions.
8333 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
8334 as "read only": it can't be written to and the buffer it points to will
8335 not be freed. Reading from a read only BIO is much more efficient than
8336 a normal memory BIO. This was added because there are several times when
8337 an area of memory needs to be read from a BIO. The previous method was
8338 to create a memory BIO and write the data to it, this results in two
8339 copies of the data and an O(n^2) reading algorithm. There is a new
8340 function BIO_new_mem_buf() which creates a read only memory BIO from
8341 an area of memory. Also modified the PKCS#7 routines to use read only
8345 *) Bugfix: ssl23_get_client_hello did not work properly when called in
8346 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
8347 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
8348 but a retry condition occured while trying to read the rest.
8351 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
8352 NID_pkcs7_encrypted by default: this was wrong since this should almost
8353 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
8354 the encrypted data type: this is a more sensible place to put it and it
8355 allows the PKCS#12 code to be tidied up that duplicated this
8359 *) Changed obj_dat.pl script so it takes its input and output files on
8360 the command line. This should avoid shell escape redirection problems
8364 *) Initial support for certificate extension requests, these are included
8365 in things like Xenroll certificate requests. Included functions to allow
8366 extensions to be obtained and added.
8369 *) -crlf option to s_client and s_server for sending newlines as
8370 CRLF (as required by many protocols).
8373 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
8375 *) Install libRSAglue.a when OpenSSL is built with RSAref.
8376 [Ralf S. Engelschall]
8378 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
8379 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
8381 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
8385 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
8386 DH parameters/keys (q is lost during that conversion, but the resulting
8387 DH parameters contain its length).
8389 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
8390 much faster than DH_generate_parameters (which creates parameters
8391 where p = 2*q + 1), and also the smaller q makes DH computations
8392 much more efficient (160-bit exponentiation instead of 1024-bit
8393 exponentiation); so this provides a convenient way to support DHE
8394 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
8395 utter importance to use
8396 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
8398 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
8399 when such DH parameters are used, because otherwise small subgroup
8400 attacks may become possible!
8403 *) Avoid memory leak in i2d_DHparams.
8406 *) Allow the -k option to be used more than once in the enc program:
8407 this allows the same encrypted message to be read by multiple recipients.
8410 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
8411 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
8412 it will always use the numerical form of the OID, even if it has a short
8416 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
8417 method only got called if p,q,dmp1,dmq1,iqmp components were present,
8418 otherwise bn_mod_exp was called. In the case of hardware keys for example
8419 no private key components need be present and it might store extra data
8420 in the RSA structure, which cannot be accessed from bn_mod_exp.
8421 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
8422 private key operations.
8425 *) Added support for SPARC Linux.
8428 *) pem_password_cb function type incompatibly changed from
8429 typedef int pem_password_cb(char *buf, int size, int rwflag);
8431 ....(char *buf, int size, int rwflag, void *userdata);
8432 so that applications can pass data to their callbacks:
8433 The PEM[_ASN1]_{read,write}... functions and macros now take an
8434 additional void * argument, which is just handed through whenever
8435 the password callback is called.
8436 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
8438 New function SSL_CTX_set_default_passwd_cb_userdata.
8440 Compatibility note: As many C implementations push function arguments
8441 onto the stack in reverse order, the new library version is likely to
8442 interoperate with programs that have been compiled with the old
8443 pem_password_cb definition (PEM_whatever takes some data that
8444 happens to be on the stack as its last argument, and the callback
8445 just ignores this garbage); but there is no guarantee whatsoever that
8448 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
8449 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
8450 problems not only on Windows, but also on some Unix platforms.
8451 To avoid problematic command lines, these definitions are now in an
8452 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
8453 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
8456 *) MIPS III/IV assembler module is reimplemented.
8459 *) More DES library cleanups: remove references to srand/rand and
8460 delete an unused file.
8463 *) Add support for the the free Netwide assembler (NASM) under Win32,
8464 since not many people have MASM (ml) and it can be hard to obtain.
8465 This is currently experimental but it seems to work OK and pass all
8466 the tests. Check out INSTALL.W32 for info.
8469 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
8470 without temporary keys kept an extra copy of the server key,
8471 and connections with temporary keys did not free everything in case
8475 *) New function RSA_check_key and new openssl rsa option -check
8476 for verifying the consistency of RSA keys.
8477 [Ulf Moeller, Bodo Moeller]
8479 *) Various changes to make Win32 compile work:
8480 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
8481 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
8482 comparison" warnings.
8483 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
8486 *) Add a debugging option to PKCS#5 v2 key generation function: when
8487 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
8488 derived keys are printed to stderr.
8491 *) Copy the flags in ASN1_STRING_dup().
8492 [Roman E. Pavlov <pre@mo.msk.ru>]
8494 *) The x509 application mishandled signing requests containing DSA
8495 keys when the signing key was also DSA and the parameters didn't match.
8497 It was supposed to omit the parameters when they matched the signing key:
8498 the verifying software was then supposed to automatically use the CA's
8499 parameters if they were absent from the end user certificate.
8501 Omitting parameters is no longer recommended. The test was also
8502 the wrong way round! This was probably due to unusual behaviour in
8503 EVP_cmp_parameters() which returns 1 if the parameters match.
8504 This meant that parameters were omitted when they *didn't* match and
8505 the certificate was useless. Certificates signed with 'ca' didn't have
8507 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
8509 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
8510 The interface is as follows:
8511 Applications can use
8512 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
8513 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
8514 "off" is now the default.
8515 The library internally uses
8516 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
8517 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
8518 to disable memory-checking temporarily.
8520 Some inconsistent states that previously were possible (and were
8521 even the default) are now avoided.
8523 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
8524 with each memory chunk allocated; this is occasionally more helpful
8525 than just having a counter.
8527 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
8529 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
8533 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
8534 which largely parallels "options", but is for changing API behaviour,
8535 whereas "options" are about protocol behaviour.
8536 Initial "mode" flags are:
8538 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
8539 a single record has been written.
8540 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
8541 retries use the same buffer location.
8542 (But all of the contents must be
8546 *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
8549 *) Fix problems with no-hmac etc.
8550 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
8552 *) New functions RSA_get_default_method(), RSA_set_method() and
8553 RSA_get_method(). These allows replacement of RSA_METHODs without having
8554 to mess around with the internals of an RSA structure.
8557 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
8558 Also really enable memory leak checks in openssl.c and in some
8560 [Chad C. Mulligan, Bodo Moeller]
8562 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
8563 up the length of negative integers. This has now been simplified to just
8564 store the length when it is first determined and use it later, rather
8565 than trying to keep track of where data is copied and updating it to
8567 [Steve Henson, reported by Brien Wheeler
8568 <bwheeler@authentica-security.com>]
8570 *) Add a new function PKCS7_signatureVerify. This allows the verification
8571 of a PKCS#7 signature but with the signing certificate passed to the
8572 function itself. This contrasts with PKCS7_dataVerify which assumes the
8573 certificate is present in the PKCS#7 structure. This isn't always the
8574 case: certificates can be omitted from a PKCS#7 structure and be
8575 distributed by "out of band" means (such as a certificate database).
8578 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
8579 function prototypes in pem.h, also change util/mkdef.pl to add the
8580 necessary function names.
8583 *) mk1mf.pl (used by Windows builds) did not properly read the
8584 options set by Configure in the top level Makefile, and Configure
8585 was not even able to write more than one option correctly.
8586 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
8589 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
8590 file to be loaded from a BIO or FILE pointer. The BIO version will
8591 for example allow memory BIOs to contain config info.
8594 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
8595 Whoever hopes to achieve shared-library compatibility across versions
8596 must use this, not the compile-time macro.
8597 (Exercise 0.9.4: Which is the minimum library version required by
8599 Note: All this applies only to multi-threaded programs, others don't
8603 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
8604 through a BIO pair triggered the default case, i.e.
8605 SSLerr(...,SSL_R_UNKNOWN_STATE).
8608 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
8609 can use the SSL library even if none of the specific BIOs is
8613 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
8614 for the encoded length.
8615 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
8617 *) Add initial documentation of the X509V3 functions.
8620 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
8621 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
8622 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
8623 secure PKCS#8 private key format with a high iteration count.
8626 *) Fix determination of Perl interpreter: A perl or perl5
8627 _directory_ in $PATH was also accepted as the interpreter.
8628 [Ralf S. Engelschall]
8630 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
8631 wrong with it but it was very old and did things like calling
8632 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
8636 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
8637 to use the new extension code.
8640 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
8641 with macros. This should make it easier to change their form, add extra
8642 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
8646 *) Add to configuration table a new entry that can specify an alternative
8647 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
8648 according to Mark Crispin <MRC@Panda.COM>.
8652 *) DES CBC did not update the IV. Weird.
8655 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
8656 Changing the behaviour of the former might break existing programs --
8657 where IV updating is needed, des_ncbc_encrypt can be used.
8660 *) When bntest is run from "make test" it drives bc to check its
8661 calculations, as well as internally checking them. If an internal check
8662 fails, it needs to cause bc to give a non-zero result or make test carries
8663 on without noticing the failure. Fixed.
8666 *) DES library cleanups.
8669 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
8670 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
8671 ciphers. NOTE: although the key derivation function has been verified
8672 against some published test vectors it has not been extensively tested
8673 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
8677 *) Instead of "mkdir -p", which is not fully portable, use new
8678 Perl script "util/mkdir-p.pl".
8681 *) Rewrite the way password based encryption (PBE) is handled. It used to
8682 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
8683 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
8684 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
8685 the 'parameter' field of the AlgorithmIdentifier is passed to the
8686 underlying key generation function so it must do its own ASN1 parsing.
8687 This has also changed the EVP_PBE_CipherInit() function which now has a
8688 'parameter' argument instead of literal salt and iteration count values
8689 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
8692 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
8693 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
8694 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
8695 KEY" because this clashed with PKCS#8 unencrypted string. Since this
8696 value was just used as a "magic string" and not used directly its
8697 value doesn't matter.
8700 *) Introduce some semblance of const correctness to BN. Shame C doesn't
8704 *) "linux-sparc64" configuration (ultrapenguin).
8705 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
8706 "linux-sparc" configuration.
8707 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
8709 *) config now generates no-xxx options for missing ciphers.
8712 *) Support the EBCDIC character set (work in progress).
8713 File ebcdic.c not yet included because it has a different license.
8714 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
8716 *) Support BS2000/OSD-POSIX.
8717 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
8719 *) Make callbacks for key generation use void * instead of char *.
8722 *) Make S/MIME samples compile (not yet tested).
8725 *) Additional typesafe stacks.
8728 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
8732 Changes between 0.9.3 and 0.9.3a [29 May 1999]
8734 *) New configuration variant "sco5-gcc".
8736 *) Updated some demos.
8737 [Sean O Riordain, Wade Scholine]
8739 *) Add missing BIO_free at exit of pkcs12 application.
8742 *) Fix memory leak in conf.c.
8745 *) Updates for Win32 to assembler version of MD5.
8748 *) Set #! path to perl in apps/der_chop to where we found it
8749 instead of using a fixed path.
8752 *) SHA library changes for irix64-mips4-cc.
8755 *) Improvements for VMS support.
8759 Changes between 0.9.2b and 0.9.3 [24 May 1999]
8761 *) Bignum library bug fix. IRIX 6 passes "make test" now!
8762 This also avoids the problems with SC4.2 and unpatched SC5.
8763 [Andy Polyakov <appro@fy.chalmers.se>]
8765 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
8766 These are required because of the typesafe stack would otherwise break
8767 existing code. If old code used a structure member which used to be STACK
8768 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
8769 sk_num or sk_value it would produce an error because the num, data members
8770 are not present in STACK_OF. Now it just produces a warning. sk_set
8771 replaces the old method of assigning a value to sk_value
8772 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
8773 that does this will no longer work (and should use sk_set instead) but
8774 this could be regarded as a "questionable" behaviour anyway.
8777 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
8778 correctly handle encrypted S/MIME data.
8781 *) Change type of various DES function arguments from des_cblock
8782 (which means, in function argument declarations, pointer to char)
8783 to des_cblock * (meaning pointer to array with 8 char elements),
8784 which allows the compiler to do more typechecking; it was like
8785 that back in SSLeay, but with lots of ugly casts.
8787 Introduce new type const_des_cblock.
8790 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
8791 problems: find RecipientInfo structure that matches recipient certificate
8792 and initialise the ASN1 structures properly based on passed cipher.
8795 *) Belatedly make the BN tests actually check the results.
8798 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
8799 to and from BNs: it was completely broken. New compilation option
8800 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
8801 key elements as negative integers.
8804 *) Reorganize and speed up MD5.
8805 [Andy Polyakov <appro@fy.chalmers.se>]
8808 [Richard Levitte <richard@levitte.org>]
8810 *) New option -out to asn1parse to allow the parsed structure to be
8811 output to a file. This is most useful when combined with the -strparse
8812 option to examine the output of things like OCTET STRINGS.
8815 *) Make SSL library a little more fool-proof by not requiring any longer
8816 that SSL_set_{accept,connect}_state be called before
8817 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
8818 in many applications because usually everything *appeared* to work as
8819 intended anyway -- now it really works as intended).
8822 *) Move openssl.cnf out of lib/.
8825 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
8826 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
8827 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
8828 [Ralf S. Engelschall]
8830 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
8831 handle PKCS#7 enveloped data properly.
8832 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
8834 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
8835 copying pointers. The cert_st handling is changed by this in
8836 various ways (and thus what used to be known as ctx->default_cert
8837 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
8838 any longer when s->cert does not give us what we need).
8839 ssl_cert_instantiate becomes obsolete by this change.
8840 As soon as we've got the new code right (possibly it already is?),
8841 we have solved a couple of bugs of the earlier code where s->cert
8842 was used as if it could not have been shared with other SSL structures.
8844 Note that using the SSL API in certain dirty ways now will result
8845 in different behaviour than observed with earlier library versions:
8846 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
8847 does not influence s as it used to.
8849 In order to clean up things more thoroughly, inside SSL_SESSION
8850 we don't use CERT any longer, but a new structure SESS_CERT
8851 that holds per-session data (if available); currently, this is
8852 the peer's certificate chain and, for clients, the server's certificate
8853 and temporary key. CERT holds only those values that can have
8854 meaningful defaults in an SSL_CTX.
8857 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
8858 from the internal representation. Various PKCS#7 fixes: remove some
8859 evil casts and set the enc_dig_alg field properly based on the signing
8863 *) Allow PKCS#12 password to be set from the command line or the
8864 environment. Let 'ca' get its config file name from the environment
8865 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
8869 *) Allow certificate policies extension to use an IA5STRING for the
8870 organization field. This is contrary to the PKIX definition but
8871 VeriSign uses it and IE5 only recognises this form. Document 'x509'
8875 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
8876 without disallowing inline assembler and the like for non-pedantic builds.
8879 *) Support Borland C++ builder.
8880 [Janez Jere <jj@void.si>, modified by Ulf Möller]
8885 *) SHA-1 cleanups and performance enhancements.
8886 [Andy Polyakov <appro@fy.chalmers.se>]
8888 *) Sparc v8plus assembler for the bignum library.
8889 [Andy Polyakov <appro@fy.chalmers.se>]
8891 *) Accept any -xxx and +xxx compiler options in Configure.
8894 *) Update HPUX configuration.
8897 *) Add missing sk_<type>_unshift() function to safestack.h
8898 [Ralf S. Engelschall]
8900 *) New function SSL_CTX_use_certificate_chain_file that sets the
8901 "extra_cert"s in addition to the certificate. (This makes sense
8902 only for "PEM" format files, as chains as a whole are not
8906 *) Support verify_depth from the SSL API.
8907 x509_vfy.c had what can be considered an off-by-one-error:
8908 Its depth (which was not part of the external interface)
8909 was actually counting the number of certificates in a chain;
8910 now it really counts the depth.
8913 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
8914 instead of X509err, which often resulted in confusing error
8915 messages since the error codes are not globally unique
8916 (e.g. an alleged error in ssl3_accept when a certificate
8917 didn't match the private key).
8919 *) New function SSL_CTX_set_session_id_context that allows to set a default
8920 value (so that you don't need SSL_set_session_id_context for each
8921 connection using the SSL_CTX).
8924 *) OAEP decoding bug fix.
8927 *) Support INSTALL_PREFIX for package builders, as proposed by
8931 *) New Configure options "threads" and "no-threads". For systems
8932 where the proper compiler options are known (currently Solaris
8933 and Linux), "threads" is the default.
8936 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
8939 *) Install various scripts to $(OPENSSLDIR)/misc, not to
8940 $(INSTALLTOP)/bin -- they shouldn't clutter directories
8941 such as /usr/local/bin.
8944 *) "make linux-shared" to build shared libraries.
8945 [Niels Poppe <niels@netbox.org>]
8947 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
8950 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
8951 extension adding in x509 utility.
8954 *) Remove NOPROTO sections and error code comments.
8957 *) Partial rewrite of the DEF file generator to now parse the ANSI
8961 *) New Configure options --prefix=DIR and --openssldir=DIR.
8964 *) Complete rewrite of the error code script(s). It is all now handled
8965 by one script at the top level which handles error code gathering,
8966 header rewriting and C source file generation. It should be much better
8967 than the old method: it now uses a modified version of Ulf's parser to
8968 read the ANSI prototypes in all header files (thus the old K&R definitions
8969 aren't needed for error creation any more) and do a better job of
8970 translating function codes into names. The old 'ASN1 error code imbedded
8971 in a comment' is no longer necessary and it doesn't use .err files which
8972 have now been deleted. Also the error code call doesn't have to appear all
8973 on one line (which resulted in some large lines...).
8976 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
8979 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
8980 0 (which usually indicates a closed connection), but continue reading.
8983 *) Fix some race conditions.
8986 *) Add support for CRL distribution points extension. Add Certificate
8987 Policies and CRL distribution points documentation.
8990 *) Move the autogenerated header file parts to crypto/opensslconf.h.
8993 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
8994 8 of keying material. Merlin has also confirmed interop with this fix
8995 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
8996 [Merlin Hughes <merlin@baltimore.ie>]
8998 *) Fix lots of warnings.
8999 [Richard Levitte <levitte@stacken.kth.se>]
9001 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
9002 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
9003 [Richard Levitte <levitte@stacken.kth.se>]
9005 *) Fix problems with sizeof(long) == 8.
9006 [Andy Polyakov <appro@fy.chalmers.se>]
9008 *) Change functions to ANSI C.
9011 *) Fix typos in error codes.
9012 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
9014 *) Remove defunct assembler files from Configure.
9017 *) SPARC v8 assembler BIGNUM implementation.
9018 [Andy Polyakov <appro@fy.chalmers.se>]
9020 *) Support for Certificate Policies extension: both print and set.
9021 Various additions to support the r2i method this uses.
9024 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
9025 return a const string when you are expecting an allocated buffer.
9028 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
9029 types DirectoryString and DisplayText.
9032 *) Add code to allow r2i extensions to access the configuration database,
9033 add an LHASH database driver and add several ctx helper functions.
9036 *) Fix an evil bug in bn_expand2() which caused various BN functions to
9037 fail when they extended the size of a BIGNUM.
9040 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
9041 support typesafe stack.
9044 *) Fix typo in SSL_[gs]et_options().
9045 [Nils Frostberg <nils@medcom.se>]
9047 *) Delete various functions and files that belonged to the (now obsolete)
9048 old X509V3 handling code.
9051 *) New Configure option "rsaref".
9054 *) Don't auto-generate pem.h.
9057 *) Introduce type-safe ASN.1 SETs.
9060 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
9061 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
9063 *) Introduce type-safe STACKs. This will almost certainly break lots of code
9064 that links with OpenSSL (well at least cause lots of warnings), but fear
9065 not: the conversion is trivial, and it eliminates loads of evil casts. A
9066 few STACKed things have been converted already. Feel free to convert more.
9067 In the fullness of time, I'll do away with the STACK type altogether.
9070 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
9071 specified in <certfile> by updating the entry in the index.txt file.
9072 This way one no longer has to edit the index.txt file manually for
9073 revoking a certificate. The -revoke option does the gory details now.
9074 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
9076 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
9077 `-text' option at all and this way the `-noout -text' combination was
9078 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
9079 [Ralf S. Engelschall]
9081 *) Make sure a corresponding plain text error message exists for the
9082 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
9083 verify callback function determined that a certificate was revoked.
9084 [Ralf S. Engelschall]
9086 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
9087 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
9088 all available cipers including rc5, which was forgotten until now.
9089 In order to let the testing shell script know which algorithms
9090 are available, a new (up to now undocumented) command
9091 "openssl list-cipher-commands" is used.
9094 *) Bugfix: s_client occasionally would sleep in select() when
9095 it should have checked SSL_pending() first.
9098 *) New functions DSA_do_sign and DSA_do_verify to provide access to
9099 the raw DSA values prior to ASN.1 encoding.
9102 *) Tweaks to Configure
9103 [Niels Poppe <niels@netbox.org>]
9105 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
9109 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
9112 *) New config option to avoid instructions that are illegal on the 80386.
9113 The default code is faster, but requires at least a 486.
9116 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
9117 SSL2_SERVER_VERSION (not used at all) macros, which are now the
9118 same as SSL2_VERSION anyway.
9121 *) New "-showcerts" option for s_client.
9124 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
9125 application. Various cleanups and fixes.
9128 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
9129 modify error routines to work internally. Add error codes and PBE init
9130 to library startup routines.
9133 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
9134 packing functions to asn1 and evp. Changed function names and error
9135 codes along the way.
9138 *) PKCS12 integration: and so it begins... First of several patches to
9139 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
9140 objects to objects.h
9143 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
9144 and display support for Thawte strong extranet extension.
9147 *) Add LinuxPPC support.
9148 [Jeff Dubrule <igor@pobox.org>]
9150 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
9151 bn_div_words in alpha.s.
9152 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
9154 *) Make sure the RSA OAEP test is skipped under -DRSAref because
9155 OAEP isn't supported when OpenSSL is built with RSAref.
9156 [Ulf Moeller <ulf@fitug.de>]
9158 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
9159 so they no longer are missing under -DNOPROTO.
9160 [Soren S. Jorvang <soren@t.dk>]
9163 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
9165 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
9166 doesn't work when the session is reused. Coming soon!
9169 *) Fix a security hole, that allows sessions to be reused in the wrong
9170 context thus bypassing client cert protection! All software that uses
9171 client certs and session caches in multiple contexts NEEDS PATCHING to
9172 allow session reuse! A fuller solution is in the works.
9173 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
9175 *) Some more source tree cleanups (removed obsolete files
9176 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
9177 permission on "config" script to be executable) and a fix for the INSTALL
9179 [Ulf Moeller <ulf@fitug.de>]
9181 *) Remove some legacy and erroneous uses of malloc, free instead of
9183 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
9185 *) Make rsa_oaep_test return non-zero on error.
9186 [Ulf Moeller <ulf@fitug.de>]
9188 *) Add support for native Solaris shared libraries. Configure
9189 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
9190 if someone would make that last step automatic.
9191 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
9193 *) ctx_size was not built with the right compiler during "make links". Fixed.
9196 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
9197 except NULL ciphers". This means the default cipher list will no longer
9198 enable NULL ciphers. They need to be specifically enabled e.g. with
9199 the string "DEFAULT:eNULL".
9202 *) Fix to RSA private encryption routines: if p < q then it would
9203 occasionally produce an invalid result. This will only happen with
9204 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
9207 *) Be less restrictive and allow also `perl util/perlpath.pl
9208 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
9209 because this way one can also use an interpreter named `perl5' (which is
9210 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
9211 installed as `perl').
9212 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
9214 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
9215 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
9217 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
9218 advapi32.lib to Win32 build and change the pem test comparision
9219 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
9220 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
9221 and crypto/des/ede_cbcm_enc.c.
9224 *) DES quad checksum was broken on big-endian architectures. Fixed.
9227 *) Comment out two functions in bio.h that aren't implemented. Fix up the
9228 Win32 test batch file so it (might) work again. The Win32 test batch file
9229 is horrible: I feel ill....
9232 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
9233 in e_os.h. Audit of header files to check ANSI and non ANSI
9234 sections: 10 functions were absent from non ANSI section and not exported
9235 from Windows DLLs. Fixed up libeay.num for new functions.
9238 *) Make `openssl version' output lines consistent.
9239 [Ralf S. Engelschall]
9241 *) Fix Win32 symbol export lists for BIO functions: Added
9242 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
9243 to ms/libeay{16,32}.def.
9244 [Ralf S. Engelschall]
9246 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
9247 fine under Unix and passes some trivial tests I've now added. But the
9248 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
9249 added to make sure no one expects that this stuff really works in the
9250 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
9251 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
9253 [Ralf S. Engelschall]
9255 *) Fix the generation of two part addresses in perl.
9256 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
9258 *) Add config entry for Linux on MIPS.
9259 [John Tobey <jtobey@channel1.com>]
9261 *) Make links whenever Configure is run, unless we are on Windoze.
9264 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
9265 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
9269 *) Add a useful kludge to allow package maintainers to specify compiler and
9270 other platforms details on the command line without having to patch the
9271 Configure script everytime: One now can use ``perl Configure
9272 <id>:<details>'', i.e. platform ids are allowed to have details appended
9273 to them (seperated by colons). This is treated as there would be a static
9274 pre-configured entry in Configure's %table under key <id> with value
9275 <details> and ``perl Configure <id>'' is called. So, when you want to
9276 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
9277 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
9278 now, which overrides the FreeBSD-elf entry on-the-fly.
9279 [Ralf S. Engelschall]
9281 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
9284 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
9285 on the `perl Configure ...' command line. This way one can compile
9286 OpenSSL libraries with Position Independent Code (PIC) which is needed
9287 for linking it into DSOs.
9288 [Ralf S. Engelschall]
9290 *) Remarkably, export ciphers were totally broken and no-one had noticed!
9294 *) Cleaned up the LICENSE document: The official contact for any license
9295 questions now is the OpenSSL core team under openssl-core@openssl.org.
9296 And add a paragraph about the dual-license situation to make sure people
9297 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
9298 to the OpenSSL toolkit.
9299 [Ralf S. Engelschall]
9301 *) General source tree makefile cleanups: Made `making xxx in yyy...'
9302 display consistent in the source tree and replaced `/bin/rm' by `rm'.
9303 Additonally cleaned up the `make links' target: Remove unnecessary
9304 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
9305 to speed processing and no longer clutter the display with confusing
9306 stuff. Instead only the actually done links are displayed.
9307 [Ralf S. Engelschall]
9309 *) Permit null encryption ciphersuites, used for authentication only. It used
9310 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
9311 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
9315 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
9316 signed attributes when verifying signatures (this would break them),
9317 the detached data encoding was wrong and public keys obtained using
9318 X509_get_pubkey() weren't freed.
9321 *) Add text documentation for the BUFFER functions. Also added a work around
9322 to a Win95 console bug. This was triggered by the password read stuff: the
9323 last character typed gets carried over to the next fread(). If you were
9324 generating a new cert request using 'req' for example then the last
9325 character of the passphrase would be CR which would then enter the first
9329 *) Added the new `Includes OpenSSL Cryptography Software' button as
9330 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
9331 button and can be used by applications based on OpenSSL to show the
9332 relationship to the OpenSSL project.
9333 [Ralf S. Engelschall]
9335 *) Remove confusing variables in function signatures in files
9336 ssl/ssl_lib.c and ssl/ssl.h.
9337 [Lennart Bong <lob@kulthea.stacken.kth.se>]
9339 *) Don't install bss_file.c under PREFIX/include/
9340 [Lennart Bong <lob@kulthea.stacken.kth.se>]
9342 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
9343 functions that return function pointers and has support for NT specific
9344 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
9345 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
9346 unsigned to signed types: this was killing the Win32 compile.
9349 *) Add new certificate file to stack functions,
9350 SSL_add_dir_cert_subjects_to_stack() and
9351 SSL_add_file_cert_subjects_to_stack(). These largely supplant
9352 SSL_load_client_CA_file(), and can be used to add multiple certs easily
9353 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
9354 This means that Apache-SSL and similar packages don't have to mess around
9355 to add as many CAs as they want to the preferred list.
9358 *) Experiment with doxygen documentation. Currently only partially applied to
9360 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
9361 openssl.doxy as the configuration file.
9364 *) Get rid of remaining C++-style comments which strict C compilers hate.
9365 [Ralf S. Engelschall, pointed out by Carlos Amengual]
9367 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
9368 compiled in by default: it has problems with large keys.
9371 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
9372 DH private keys and/or callback functions which directly correspond to
9373 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
9374 is needed for applications which have to configure certificates on a
9375 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
9377 For the RSA certificate situation is makes no difference, but
9378 for the DSA certificate situation this fixes the "no shared cipher"
9379 problem where the OpenSSL cipher selection procedure failed because the
9380 temporary keys were not overtaken from the context and the API provided
9381 no way to reconfigure them.
9382 The new functions now let applications reconfigure the stuff and they
9383 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
9384 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
9385 non-public-API function ssl_cert_instantiate() is used as a helper
9386 function and also to reduce code redundancy inside ssl_rsa.c.
9387 [Ralf S. Engelschall]
9389 *) Move s_server -dcert and -dkey options out of the undocumented feature
9390 area because they are useful for the DSA situation and should be
9391 recognized by the users.
9392 [Ralf S. Engelschall]
9394 *) Fix the cipher decision scheme for export ciphers: the export bits are
9395 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
9396 SSL_EXP_MASK. So, the original variable has to be used instead of the
9397 already masked variable.
9398 [Richard Levitte <levitte@stacken.kth.se>]
9400 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
9401 [Richard Levitte <levitte@stacken.kth.se>]
9403 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
9404 from `int' to `unsigned int' because it's a length and initialized by
9405 EVP_DigestFinal() which expects an `unsigned int *'.
9406 [Richard Levitte <levitte@stacken.kth.se>]
9408 *) Don't hard-code path to Perl interpreter on shebang line of Configure
9409 script. Instead use the usual Shell->Perl transition trick.
9410 [Ralf S. Engelschall]
9412 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
9413 (in addition to RSA certificates) to match the behaviour of `openssl dsa
9414 -noout -modulus' as it's already the case for `openssl rsa -noout
9415 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
9416 currently the public key is printed (a decision which was already done by
9417 `openssl dsa -modulus' in the past) which serves a similar purpose.
9418 Additionally the NO_RSA no longer completely removes the whole -modulus
9419 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
9421 [Ralf S. Engelschall]
9423 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
9424 BIO. See the source (crypto/evp/bio_ok.c) for more info.
9425 [Arne Ansper <arne@ats.cyber.ee>]
9427 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
9428 to be added. Now both 'req' and 'ca' can use new objects defined in the
9432 *) Add cool BIO that does syslog (or event log on NT).
9433 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
9435 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
9436 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
9437 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
9438 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
9441 *) Add preliminary config info for new extension code.
9444 *) Make RSA_NO_PADDING really use no padding.
9445 [Ulf Moeller <ulf@fitug.de>]
9447 *) Generate errors when private/public key check is done.
9450 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
9451 for some CRL extensions and new objects added.
9454 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
9455 key usage extension and fuller support for authority key id.
9458 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
9459 padding method for RSA, which is recommended for new applications in PKCS
9460 #1 v2.0 (RFC 2437, October 1998).
9461 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
9462 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
9463 against Bleichbacher's attack on RSA.
9464 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
9467 *) Updates to the new SSL compression code
9468 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
9470 *) Fix so that the version number in the master secret, when passed
9471 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
9472 (because the server will not accept higher), that the version number
9473 is 0x03,0x01, not 0x03,0x00
9474 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
9476 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
9477 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
9478 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
9481 *) Support for RAW extensions where an arbitrary extension can be
9482 created by including its DER encoding. See apps/openssl.cnf for
9486 *) Make sure latest Perl versions don't interpret some generated C array
9487 code as Perl array code in the crypto/err/err_genc.pl script.
9488 [Lars Weber <3weber@informatik.uni-hamburg.de>]
9490 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
9491 not many people have the assembler. Various Win32 compilation fixes and
9492 update to the INSTALL.W32 file with (hopefully) more accurate Win32
9496 *) Modify configure script 'Configure' to automatically create crypto/date.h
9497 file under Win32 and also build pem.h from pem.org. New script
9498 util/mkfiles.pl to create the MINFO file on environments that can't do a
9499 'make files': perl util/mkfiles.pl >MINFO should work.
9502 *) Major rework of DES function declarations, in the pursuit of correctness
9503 and purity. As a result, many evil casts evaporated, and some weirdness,
9504 too. You may find this causes warnings in your code. Zapping your evil
9505 casts will probably fix them. Mostly.
9508 *) Fix for a typo in asn1.h. Bug fix to object creation script
9509 obj_dat.pl. It considered a zero in an object definition to mean
9510 "end of object": none of the objects in objects.h have any zeros
9511 so it wasn't spotted.
9512 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
9514 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
9515 Masking (CBCM). In the absence of test vectors, the best I have been able
9516 to do is check that the decrypt undoes the encrypt, so far. Send me test
9517 vectors if you have them.
9520 *) Correct calculation of key length for export ciphers (too much space was
9521 allocated for null ciphers). This has not been tested!
9524 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
9525 message is now correct (it understands "crypto" and "ssl" on its
9526 command line). There is also now an "update" option. This will update
9527 the util/ssleay.num and util/libeay.num files with any new functions.
9529 perl util/mkdef.pl crypto ssl update
9530 it will update them.
9533 *) Overhauled the Perl interface (perl/*):
9534 - ported BN stuff to OpenSSL's different BN library
9535 - made the perl/ source tree CVS-aware
9536 - renamed the package from SSLeay to OpenSSL (the files still contain
9537 their history because I've copied them in the repository)
9538 - removed obsolete files (the test scripts will be replaced
9539 by better Test::Harness variants in the future)
9540 [Ralf S. Engelschall]
9542 *) First cut for a very conservative source tree cleanup:
9543 1. merge various obsolete readme texts into doc/ssleay.txt
9544 where we collect the old documents and readme texts.
9545 2. remove the first part of files where I'm already sure that we no
9546 longer need them because of three reasons: either they are just temporary
9547 files which were left by Eric or they are preserved original files where
9548 I've verified that the diff is also available in the CVS via "cvs diff
9549 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
9550 the crypto/md/ stuff).
9551 [Ralf S. Engelschall]
9553 *) More extension code. Incomplete support for subject and issuer alt
9554 name, issuer and authority key id. Change the i2v function parameters
9555 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
9556 what that's for :-) Fix to ASN1 macro which messed up
9557 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
9560 *) Preliminary support for ENUMERATED type. This is largely copied from the
9564 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
9565 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
9567 *) Make sure `make rehash' target really finds the `openssl' program.
9568 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
9570 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
9571 like to hear about it if this slows down other processors.
9574 *) Add CygWin32 platform information to Configure script.
9575 [Alan Batie <batie@aahz.jf.intel.com>]
9577 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
9578 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
9580 *) New program nseq to manipulate netscape certificate sequences
9583 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
9587 *) Fixes to BN code. Previously the default was to define BN_RECURSION
9588 but the BN code had some problems that would cause failures when
9589 doing certificate verification and some other functions.
9590 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
9592 *) Add ASN1 and PEM code to support netscape certificate sequences.
9595 *) Add ASN1 and PEM code to support netscape certificate sequences.
9598 *) Add several PKIX and private extended key usage OIDs.
9601 *) Modify the 'ca' program to handle the new extension code. Modify
9602 openssl.cnf for new extension format, add comments.
9605 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
9606 and add a sample to openssl.cnf so req -x509 now adds appropriate
9610 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
9611 error code, add initial support to X509_print() and x509 application.
9614 *) Takes a deep breath and start addding X509 V3 extension support code. Add
9615 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
9616 stuff is currently isolated and isn't even compiled yet.
9619 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
9620 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
9621 Removed the versions check from X509 routines when loading extensions:
9622 this allows certain broken certificates that don't set the version
9623 properly to be processed.
9626 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
9627 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
9628 can still be regenerated with "make depend".
9631 *) Spelling mistake in C version of CAST-128.
9632 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
9634 *) Changes to the error generation code. The perl script err-code.pl
9635 now reads in the old error codes and retains the old numbers, only
9636 adding new ones if necessary. It also only changes the .err files if new
9637 codes are added. The makefiles have been modified to only insert errors
9638 when needed (to avoid needlessly modifying header files). This is done
9639 by only inserting errors if the .err file is newer than the auto generated
9640 C file. To rebuild all the error codes from scratch (the old behaviour)
9641 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
9642 or delete all the .err files.
9645 *) CAST-128 was incorrectly implemented for short keys. The C version has
9646 been fixed, but is untested. The assembler versions are also fixed, but
9647 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
9648 to regenerate it if needed.
9649 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
9650 Hagino <itojun@kame.net>]
9652 *) File was opened incorrectly in randfile.c.
9653 [Ulf Möller <ulf@fitug.de>]
9655 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
9656 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
9657 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
9658 al: it's just almost always a UTCTime. Note this patch adds new error
9659 codes so do a "make errors" if there are problems.
9662 *) Correct Linux 1 recognition in config.
9663 [Ulf Möller <ulf@fitug.de>]
9665 *) Remove pointless MD5 hash when using DSA keys in ca.
9666 [Anonymous <nobody@replay.com>]
9668 *) Generate an error if given an empty string as a cert directory. Also
9669 generate an error if handed NULL (previously returned 0 to indicate an
9670 error, but didn't set one).
9671 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
9673 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
9676 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
9677 parameters. This was causing a warning which killed off the Win32 compile.
9680 *) Remove C++ style comments from crypto/bn/bn_local.h.
9681 [Neil Costigan <neil.costigan@celocom.com>]
9683 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
9684 based on a text string, looking up short and long names and finally
9685 "dot" format. The "dot" format stuff didn't work. Added new function
9686 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
9687 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
9688 OID is not part of the table.
9691 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
9692 X509_LOOKUP_by_alias().
9695 *) Sort openssl functions by name.
9698 *) Get the gendsa program working (hopefully) and add it to app list. Remove
9699 encryption from sample DSA keys (in case anyone is interested the password
9703 *) Make _all_ *_free functions accept a NULL pointer.
9704 [Frans Heymans <fheymans@isaserver.be>]
9706 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
9708 [Anonymous <nobody@replay.com>]
9710 *) s_server should send the CAfile as acceptable CAs, not its own cert.
9711 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
9713 *) Don't blow it for numeric -newkey arguments to apps/req.
9714 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
9716 *) Temp key "for export" tests were wrong in s3_srvr.c.
9717 [Anonymous <nobody@replay.com>]
9719 *) Add prototype for temp key callback functions
9720 SSL_CTX_set_tmp_{rsa,dh}_callback().
9723 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
9724 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
9727 *) X509_name_add_entry() freed the wrong thing after an error.
9728 [Arne Ansper <arne@ats.cyber.ee>]
9730 *) rsa_eay.c would attempt to free a NULL context.
9731 [Arne Ansper <arne@ats.cyber.ee>]
9733 *) BIO_s_socket() had a broken should_retry() on Windoze.
9734 [Arne Ansper <arne@ats.cyber.ee>]
9736 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
9737 [Arne Ansper <arne@ats.cyber.ee>]
9739 *) Make sure the already existing X509_STORE->depth variable is initialized
9740 in X509_STORE_new(), but document the fact that this variable is still
9741 unused in the certificate verification process.
9742 [Ralf S. Engelschall]
9744 *) Fix the various library and apps files to free up pkeys obtained from
9745 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
9748 *) Fix reference counting in X509_PUBKEY_get(). This makes
9749 demos/maurice/example2.c work, amongst others, probably.
9750 [Steve Henson and Ben Laurie]
9752 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
9753 `openssl' and second, the shortcut symlinks for the `openssl <command>'
9754 are no longer created. This way we have a single and consistent command
9755 line interface `openssl <command>', similar to `cvs <command>'.
9756 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
9758 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
9759 BIT STRING wrapper always have zero unused bits.
9762 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
9765 *) Make the top-level INSTALL documentation easier to understand.
9768 *) Makefiles updated to exit if an error occurs in a sub-directory
9769 make (including if user presses ^C) [Paul Sutton]
9771 *) Make Montgomery context stuff explicit in RSA data structure.
9774 *) Fix build order of pem and err to allow for generated pem.h.
9777 *) Fix renumbering bug in X509_NAME_delete_entry().
9780 *) Enhanced the err-ins.pl script so it makes the error library number
9781 global and can add a library name. This is needed for external ASN1 and
9782 other error libraries.
9785 *) Fixed sk_insert which never worked properly.
9788 *) Fix ASN1 macros so they can handle indefinite length construted
9789 EXPLICIT tags. Some non standard certificates use these: they can now
9793 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
9794 into a single doc/ssleay.txt bundle. This way the information is still
9795 preserved but no longer messes up this directory. Now it's new room for
9796 the new set of documenation files.
9797 [Ralf S. Engelschall]
9799 *) SETs were incorrectly DER encoded. This was a major pain, because they
9800 shared code with SEQUENCEs, which aren't coded the same. This means that
9801 almost everything to do with SETs or SEQUENCEs has either changed name or
9802 number of arguments.
9803 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
9805 *) Fix test data to work with the above.
9808 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
9809 was already fixed by Eric for 0.9.1 it seems.
9810 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
9812 *) Autodetect FreeBSD3.
9815 *) Fix various bugs in Configure. This affects the following platforms:
9819 unixware-2.0-pentium
9823 *) Eliminate generated files from CVS. Reorder tests to regenerate files
9824 before they are needed.
9827 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
9831 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
9833 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
9834 changed SSLeay to OpenSSL in version strings.
9835 [Ralf S. Engelschall]
9837 *) Some fixups to the top-level documents.
9840 *) Fixed the nasty bug where rsaref.h was not found under compile-time
9841 because the symlink to include/ was missing.
9842 [Ralf S. Engelschall]
9844 *) Incorporated the popular no-RSA/DSA-only patches
9845 which allow to compile a RSA-free SSLeay.
9846 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
9848 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
9849 when "ssleay" is still not found.
9850 [Ralf S. Engelschall]
9852 *) Added more platforms to Configure: Cray T3E, HPUX 11,
9853 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
9855 *) Updated the README file.
9856 [Ralf S. Engelschall]
9858 *) Added various .cvsignore files in the CVS repository subdirs
9859 to make a "cvs update" really silent.
9860 [Ralf S. Engelschall]
9862 *) Recompiled the error-definition header files and added
9863 missing symbols to the Win32 linker tables.
9864 [Ralf S. Engelschall]
9866 *) Cleaned up the top-level documents;
9867 o new files: CHANGES and LICENSE
9868 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
9869 o merged COPYRIGHT into LICENSE
9870 o removed obsolete TODO file
9871 o renamed MICROSOFT to INSTALL.W32
9872 [Ralf S. Engelschall]
9874 *) Removed dummy files from the 0.9.1b source tree:
9875 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
9876 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
9877 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
9878 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
9879 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
9880 [Ralf S. Engelschall]
9882 *) Added various platform portability fixes.
9885 *) The Genesis of the OpenSSL rpject:
9886 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
9887 Young and Tim J. Hudson created while they were working for C2Net until
9889 [The OpenSSL Project]
9892 Changes between 0.9.0b and 0.9.1b [not released]
9894 *) Updated a few CA certificates under certs/
9897 *) Changed some BIGNUM api stuff.
9900 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
9901 DGUX x86, Linux Alpha, etc.
9904 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
9905 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
9909 *) Add -strparse option to asn1pars program which parses nested
9911 [Dr Stephen Henson <shenson@bigfoot.com>]
9913 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
9916 *) DSA fix for "ca" program.
9919 *) Added "-genkey" option to "dsaparam" program.
9922 *) Added RIPE MD160 (rmd160) message digest.
9925 *) Added -a (all) option to "ssleay version" command.
9928 *) Added PLATFORM define which is the id given to Configure.
9931 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
9934 *) Extended the ASN.1 parser routines.
9937 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
9940 *) Added a BN_CTX to the BN library.
9943 *) Fixed the weak key values in DES library
9946 *) Changed API in EVP library for cipher aliases.
9949 *) Added support for RC2/64bit cipher.
9952 *) Converted the lhash library to the crypto/mem.c functions.
9955 *) Added more recognized ASN.1 object ids.
9958 *) Added more RSA padding checks for SSL/TLS.
9961 *) Added BIO proxy/filter functionality.
9964 *) Added extra_certs to SSL_CTX which can be used
9965 send extra CA certificates to the client in the CA cert chain sending
9966 process. It can be configured with SSL_CTX_add_extra_chain_cert().
9969 *) Now Fortezza is denied in the authentication phase because
9970 this is key exchange mechanism is not supported by SSLeay at all.
9973 *) Additional PKCS1 checks.
9976 *) Support the string "TLSv1" for all TLS v1 ciphers.
9979 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
9980 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
9983 *) Fixed a few memory leaks.
9986 *) Fixed various code and comment typos.
9989 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
9990 bytes sent in the client random.
9991 [Edward Bishop <ebishop@spyglass.com>]
tuxillo's projects / dragonfly.git / blob