/* * Copyright © 2006-2007 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. * * Authors: * Eric Anholt * * $FreeBSD: src/sys/dev/drm2/i915/intel_display.c,v 1.2 2012/05/24 19:13:54 dim Exp $ */ #include #include #include #include #include "intel_drv.h" #include #include "i915_drv.h" #include #include #include #define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) bool intel_pipe_has_type(struct drm_crtc *crtc, int type); static void intel_increase_pllclock(struct drm_crtc *crtc); static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on); typedef struct { /* given values */ int n; int m1, m2; int p1, p2; /* derived values */ int dot; int vco; int m; int p; } intel_clock_t; typedef struct { int min, max; } intel_range_t; typedef struct { int dot_limit; int p2_slow, p2_fast; } intel_p2_t; #define INTEL_P2_NUM 2 typedef struct intel_limit intel_limit_t; struct intel_limit { intel_range_t dot, vco, n, m, m1, m2, p, p1; intel_p2_t p2; bool (* find_pll)(const intel_limit_t *, struct drm_crtc *, int, int, intel_clock_t *, intel_clock_t *); }; /* FDI */ #define IRONLAKE_FDI_FREQ 2700000 /* in kHz for mode->clock */ static bool intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *match_clock, intel_clock_t *best_clock); static bool intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *match_clock, intel_clock_t *best_clock); static bool intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *match_clock, intel_clock_t *best_clock); static bool intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *match_clock, intel_clock_t *best_clock); static inline u32 /* units of 100MHz */ intel_fdi_link_freq(struct drm_device *dev) { if (IS_GEN5(dev)) { struct drm_i915_private *dev_priv = dev->dev_private; return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2; } else return 27; } static const intel_limit_t intel_limits_i8xx_dvo = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 930000, .max = 1400000 }, .n = { .min = 3, .max = 16 }, .m = { .min = 96, .max = 140 }, .m1 = { .min = 18, .max = 26 }, .m2 = { .min = 6, .max = 16 }, .p = { .min = 4, .max = 128 }, .p1 = { .min = 2, .max = 33 }, .p2 = { .dot_limit = 165000, .p2_slow = 4, .p2_fast = 2 }, .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_i8xx_lvds = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 930000, .max = 1400000 }, .n = { .min = 3, .max = 16 }, .m = { .min = 96, .max = 140 }, .m1 = { .min = 18, .max = 26 }, .m2 = { .min = 6, .max = 16 }, .p = { .min = 4, .max = 128 }, .p1 = { .min = 1, .max = 6 }, .p2 = { .dot_limit = 165000, .p2_slow = 14, .p2_fast = 7 }, .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_i9xx_sdvo = { .dot = { .min = 20000, .max = 400000 }, .vco = { .min = 1400000, .max = 2800000 }, .n = { .min = 1, .max = 6 }, .m = { .min = 70, .max = 120 }, .m1 = { .min = 10, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 5, .max = 80 }, .p1 = { .min = 1, .max = 8 }, .p2 = { .dot_limit = 200000, .p2_slow = 10, .p2_fast = 5 }, .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_i9xx_lvds = { .dot = { .min = 20000, .max = 400000 }, .vco = { .min = 1400000, .max = 2800000 }, .n = { .min = 1, .max = 6 }, .m = { .min = 70, .max = 120 }, .m1 = { .min = 10, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 7, .max = 98 }, .p1 = { .min = 1, .max = 8 }, .p2 = { .dot_limit = 112000, .p2_slow = 14, .p2_fast = 7 }, .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_sdvo = { .dot = { .min = 25000, .max = 270000 }, .vco = { .min = 1750000, .max = 3500000}, .n = { .min = 1, .max = 4 }, .m = { .min = 104, .max = 138 }, .m1 = { .min = 17, .max = 23 }, .m2 = { .min = 5, .max = 11 }, .p = { .min = 10, .max = 30 }, .p1 = { .min = 1, .max = 3}, .p2 = { .dot_limit = 270000, .p2_slow = 10, .p2_fast = 10 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_hdmi = { .dot = { .min = 22000, .max = 400000 }, .vco = { .min = 1750000, .max = 3500000}, .n = { .min = 1, .max = 4 }, .m = { .min = 104, .max = 138 }, .m1 = { .min = 16, .max = 23 }, .m2 = { .min = 5, .max = 11 }, .p = { .min = 5, .max = 80 }, .p1 = { .min = 1, .max = 8}, .p2 = { .dot_limit = 165000, .p2_slow = 10, .p2_fast = 5 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_single_channel_lvds = { .dot = { .min = 20000, .max = 115000 }, .vco = { .min = 1750000, .max = 3500000 }, .n = { .min = 1, .max = 3 }, .m = { .min = 104, .max = 138 }, .m1 = { .min = 17, .max = 23 }, .m2 = { .min = 5, .max = 11 }, .p = { .min = 28, .max = 112 }, .p1 = { .min = 2, .max = 8 }, .p2 = { .dot_limit = 0, .p2_slow = 14, .p2_fast = 14 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_dual_channel_lvds = { .dot = { .min = 80000, .max = 224000 }, .vco = { .min = 1750000, .max = 3500000 }, .n = { .min = 1, .max = 3 }, .m = { .min = 104, .max = 138 }, .m1 = { .min = 17, .max = 23 }, .m2 = { .min = 5, .max = 11 }, .p = { .min = 14, .max = 42 }, .p1 = { .min = 2, .max = 6 }, .p2 = { .dot_limit = 0, .p2_slow = 7, .p2_fast = 7 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_display_port = { .dot = { .min = 161670, .max = 227000 }, .vco = { .min = 1750000, .max = 3500000}, .n = { .min = 1, .max = 2 }, .m = { .min = 97, .max = 108 }, .m1 = { .min = 0x10, .max = 0x12 }, .m2 = { .min = 0x05, .max = 0x06 }, .p = { .min = 10, .max = 20 }, .p1 = { .min = 1, .max = 2}, .p2 = { .dot_limit = 0, .p2_slow = 10, .p2_fast = 10 }, .find_pll = intel_find_pll_g4x_dp, }; static const intel_limit_t intel_limits_pineview_sdvo = { .dot = { .min = 20000, .max = 400000}, .vco = { .min = 1700000, .max = 3500000 }, /* Pineview's Ncounter is a ring counter */ .n = { .min = 3, .max = 6 }, .m = { .min = 2, .max = 256 }, /* Pineview only has one combined m divider, which we treat as m2. */ .m1 = { .min = 0, .max = 0 }, .m2 = { .min = 0, .max = 254 }, .p = { .min = 5, .max = 80 }, .p1 = { .min = 1, .max = 8 }, .p2 = { .dot_limit = 200000, .p2_slow = 10, .p2_fast = 5 }, .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_pineview_lvds = { .dot = { .min = 20000, .max = 400000 }, .vco = { .min = 1700000, .max = 3500000 }, .n = { .min = 3, .max = 6 }, .m = { .min = 2, .max = 256 }, .m1 = { .min = 0, .max = 0 }, .m2 = { .min = 0, .max = 254 }, .p = { .min = 7, .max = 112 }, .p1 = { .min = 1, .max = 8 }, .p2 = { .dot_limit = 112000, .p2_slow = 14, .p2_fast = 14 }, .find_pll = intel_find_best_PLL, }; /* Ironlake / Sandybridge * * We calculate clock using (register_value + 2) for N/M1/M2, so here * the range value for them is (actual_value - 2). */ static const intel_limit_t intel_limits_ironlake_dac = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 1760000, .max = 3510000 }, .n = { .min = 1, .max = 5 }, .m = { .min = 79, .max = 127 }, .m1 = { .min = 12, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 5, .max = 80 }, .p1 = { .min = 1, .max = 8 }, .p2 = { .dot_limit = 225000, .p2_slow = 10, .p2_fast = 5 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_single_lvds = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 1760000, .max = 3510000 }, .n = { .min = 1, .max = 3 }, .m = { .min = 79, .max = 118 }, .m1 = { .min = 12, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 28, .max = 112 }, .p1 = { .min = 2, .max = 8 }, .p2 = { .dot_limit = 225000, .p2_slow = 14, .p2_fast = 14 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_dual_lvds = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 1760000, .max = 3510000 }, .n = { .min = 1, .max = 3 }, .m = { .min = 79, .max = 127 }, .m1 = { .min = 12, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 14, .max = 56 }, .p1 = { .min = 2, .max = 8 }, .p2 = { .dot_limit = 225000, .p2_slow = 7, .p2_fast = 7 }, .find_pll = intel_g4x_find_best_PLL, }; /* LVDS 100mhz refclk limits. */ static const intel_limit_t intel_limits_ironlake_single_lvds_100m = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 1760000, .max = 3510000 }, .n = { .min = 1, .max = 2 }, .m = { .min = 79, .max = 126 }, .m1 = { .min = 12, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 28, .max = 112 }, .p1 = { .min = 2, .max = 8 }, .p2 = { .dot_limit = 225000, .p2_slow = 14, .p2_fast = 14 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 1760000, .max = 3510000 }, .n = { .min = 1, .max = 3 }, .m = { .min = 79, .max = 126 }, .m1 = { .min = 12, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 14, .max = 42 }, .p1 = { .min = 2, .max = 6 }, .p2 = { .dot_limit = 225000, .p2_slow = 7, .p2_fast = 7 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_display_port = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 1760000, .max = 3510000}, .n = { .min = 1, .max = 2 }, .m = { .min = 81, .max = 90 }, .m1 = { .min = 12, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 10, .max = 20 }, .p1 = { .min = 1, .max = 2}, .p2 = { .dot_limit = 0, .p2_slow = 10, .p2_fast = 10 }, .find_pll = intel_find_pll_ironlake_dp, }; static void vlv_init_dpio(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; /* Reset the DPIO config */ I915_WRITE(DPIO_CTL, 0); POSTING_READ(DPIO_CTL); I915_WRITE(DPIO_CTL, 1); POSTING_READ(DPIO_CTL); } static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc, int refclk) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; const intel_limit_t *limit; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) { /* LVDS dual channel */ if (refclk == 100000) limit = &intel_limits_ironlake_dual_lvds_100m; else limit = &intel_limits_ironlake_dual_lvds; } else { if (refclk == 100000) limit = &intel_limits_ironlake_single_lvds_100m; else limit = &intel_limits_ironlake_single_lvds; } } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || HAS_eDP) limit = &intel_limits_ironlake_display_port; else limit = &intel_limits_ironlake_dac; return limit; } static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; const intel_limit_t *limit; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) /* LVDS with dual channel */ limit = &intel_limits_g4x_dual_channel_lvds; else /* LVDS with dual channel */ limit = &intel_limits_g4x_single_channel_lvds; } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) || intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) { limit = &intel_limits_g4x_hdmi; } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) { limit = &intel_limits_g4x_sdvo; } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { limit = &intel_limits_g4x_display_port; } else /* The option is for other outputs */ limit = &intel_limits_i9xx_sdvo; return limit; } static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk) { struct drm_device *dev = crtc->dev; const intel_limit_t *limit; if (HAS_PCH_SPLIT(dev)) limit = intel_ironlake_limit(crtc, refclk); else if (IS_G4X(dev)) { limit = intel_g4x_limit(crtc); } else if (IS_PINEVIEW(dev)) { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) limit = &intel_limits_pineview_lvds; else limit = &intel_limits_pineview_sdvo; } else if (!IS_GEN2(dev)) { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) limit = &intel_limits_i9xx_lvds; else limit = &intel_limits_i9xx_sdvo; } else { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) limit = &intel_limits_i8xx_lvds; else limit = &intel_limits_i8xx_dvo; } return limit; } /* m1 is reserved as 0 in Pineview, n is a ring counter */ static void pineview_clock(int refclk, intel_clock_t *clock) { clock->m = clock->m2 + 2; clock->p = clock->p1 * clock->p2; clock->vco = refclk * clock->m / clock->n; clock->dot = clock->vco / clock->p; } static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock) { if (IS_PINEVIEW(dev)) { pineview_clock(refclk, clock); return; } clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); clock->p = clock->p1 * clock->p2; clock->vco = refclk * clock->m / (clock->n + 2); clock->dot = clock->vco / clock->p; } /** * Returns whether any output on the specified pipe is of the specified type */ bool intel_pipe_has_type(struct drm_crtc *crtc, int type) { struct drm_device *dev = crtc->dev; struct drm_mode_config *mode_config = &dev->mode_config; struct intel_encoder *encoder; list_for_each_entry(encoder, &mode_config->encoder_list, base.head) if (encoder->base.crtc == crtc && encoder->type == type) return true; return false; } #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0) /** * Returns whether the given set of divisors are valid for a given refclk with * the given connectors. */ static bool intel_PLL_is_valid(struct drm_device *dev, const intel_limit_t *limit, const intel_clock_t *clock) { if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) INTELPllInvalid("p1 out of range\n"); if (clock->p < limit->p.min || limit->p.max < clock->p) INTELPllInvalid("p out of range\n"); if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) INTELPllInvalid("m2 out of range\n"); if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) INTELPllInvalid("m1 out of range\n"); if (clock->m1 <= clock->m2 && !IS_PINEVIEW(dev)) INTELPllInvalid("m1 <= m2\n"); if (clock->m < limit->m.min || limit->m.max < clock->m) INTELPllInvalid("m out of range\n"); if (clock->n < limit->n.min || limit->n.max < clock->n) INTELPllInvalid("n out of range\n"); if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) INTELPllInvalid("vco out of range\n"); /* XXX: We may need to be checking "Dot clock" depending on the multiplier, * connector, etc., rather than just a single range. */ if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) INTELPllInvalid("dot out of range\n"); return true; } static bool intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *match_clock, intel_clock_t *best_clock) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; intel_clock_t clock; int err = target; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && (I915_READ(LVDS)) != 0) { /* * For LVDS, if the panel is on, just rely on its current * settings for dual-channel. We haven't figured out how to * reliably set up different single/dual channel state, if we * even can. */ if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) clock.p2 = limit->p2.p2_fast; else clock.p2 = limit->p2.p2_slow; } else { if (target < limit->p2.dot_limit) clock.p2 = limit->p2.p2_slow; else clock.p2 = limit->p2.p2_fast; } memset(best_clock, 0, sizeof(*best_clock)); for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max; clock.m2++) { /* m1 is always 0 in Pineview */ if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev)) break; for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) { for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max; clock.p1++) { int this_err; intel_clock(dev, refclk, &clock); if (!intel_PLL_is_valid(dev, limit, &clock)) continue; if (match_clock && clock.p != match_clock->p) continue; this_err = abs(clock.dot - target); if (this_err < err) { *best_clock = clock; err = this_err; } } } } } return (err != target); } static bool intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *match_clock, intel_clock_t *best_clock) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; intel_clock_t clock; int max_n; bool found; /* approximately equals target * 0.00585 */ int err_most = (target >> 8) + (target >> 9); found = false; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { int lvds_reg; if (HAS_PCH_SPLIT(dev)) lvds_reg = PCH_LVDS; else lvds_reg = LVDS; if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) clock.p2 = limit->p2.p2_fast; else clock.p2 = limit->p2.p2_slow; } else { if (target < limit->p2.dot_limit) clock.p2 = limit->p2.p2_slow; else clock.p2 = limit->p2.p2_fast; } memset(best_clock, 0, sizeof(*best_clock)); max_n = limit->n.max; /* based on hardware requirement, prefer smaller n to precision */ for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) { /* based on hardware requirement, prefere larger m1,m2 */ for (clock.m1 = limit->m1.max; clock.m1 >= limit->m1.min; clock.m1--) { for (clock.m2 = limit->m2.max; clock.m2 >= limit->m2.min; clock.m2--) { for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) { int this_err; intel_clock(dev, refclk, &clock); if (!intel_PLL_is_valid(dev, limit, &clock)) continue; if (match_clock && clock.p != match_clock->p) continue; this_err = abs(clock.dot - target); if (this_err < err_most) { *best_clock = clock; err_most = this_err; max_n = clock.n; found = true; } } } } } return found; } static bool intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *match_clock, intel_clock_t *best_clock) { struct drm_device *dev = crtc->dev; intel_clock_t clock; if (target < 200000) { clock.n = 1; clock.p1 = 2; clock.p2 = 10; clock.m1 = 12; clock.m2 = 9; } else { clock.n = 2; clock.p1 = 1; clock.p2 = 10; clock.m1 = 14; clock.m2 = 8; } intel_clock(dev, refclk, &clock); memcpy(best_clock, &clock, sizeof(intel_clock_t)); return true; } /* DisplayPort has only two frequencies, 162MHz and 270MHz */ static bool intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *match_clock, intel_clock_t *best_clock) { intel_clock_t clock; if (target < 200000) { clock.p1 = 2; clock.p2 = 10; clock.n = 2; clock.m1 = 23; clock.m2 = 8; } else { clock.p1 = 1; clock.p2 = 10; clock.n = 1; clock.m1 = 14; clock.m2 = 2; } clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2); clock.p = (clock.p1 * clock.p2); clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p; clock.vco = 0; memcpy(best_clock, &clock, sizeof(intel_clock_t)); return true; } enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv, enum i915_pipe pipe) { struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe]; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); return intel_crtc->cpu_transcoder; } /** * intel_wait_for_vblank - wait for vblank on a given pipe * @dev: drm device * @pipe: pipe to wait for * * Wait for vblank to occur on a given pipe. Needed for various bits of * mode setting code. */ void intel_wait_for_vblank(struct drm_device *dev, int pipe) { struct drm_i915_private *dev_priv = dev->dev_private; int pipestat_reg = PIPESTAT(pipe); /* Clear existing vblank status. Note this will clear any other * sticky status fields as well. * * This races with i915_driver_irq_handler() with the result * that either function could miss a vblank event. Here it is not * fatal, as we will either wait upon the next vblank interrupt or * timeout. Generally speaking intel_wait_for_vblank() is only * called during modeset at which time the GPU should be idle and * should *not* be performing page flips and thus not waiting on * vblanks... * Currently, the result of us stealing a vblank from the irq * handler is that a single frame will be skipped during swapbuffers. */ I915_WRITE(pipestat_reg, I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS); /* Wait for vblank interrupt bit to set */ if (_intel_wait_for(dev, I915_READ(pipestat_reg) & PIPE_VBLANK_INTERRUPT_STATUS, 50, 1, "915vbl")) DRM_DEBUG_KMS("vblank wait timed out\n"); } /* * intel_wait_for_pipe_off - wait for pipe to turn off * @dev: drm device * @pipe: pipe to wait for * * After disabling a pipe, we can't wait for vblank in the usual way, * spinning on the vblank interrupt status bit, since we won't actually * see an interrupt when the pipe is disabled. * * On Gen4 and above: * wait for the pipe register state bit to turn off * * Otherwise: * wait for the display line value to settle (it usually * ends up stopping at the start of the next frame). * */ void intel_wait_for_pipe_off(struct drm_device *dev, int pipe) { struct drm_i915_private *dev_priv = dev->dev_private; if (INTEL_INFO(dev)->gen >= 4) { int reg = PIPECONF(pipe); /* Wait for the Pipe State to go off */ if (_intel_wait_for(dev, (I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0, 100, 1, "915pip")) DRM_DEBUG_KMS("pipe_off wait timed out\n"); } else { u32 last_line, line_mask; int reg = PIPEDSL(pipe); unsigned long timeout = jiffies + msecs_to_jiffies(100); if (IS_GEN2(dev)) line_mask = DSL_LINEMASK_GEN2; else line_mask = DSL_LINEMASK_GEN3; /* Wait for the display line to settle */ do { last_line = I915_READ(reg) & line_mask; DELAY(5000); } while (((I915_READ(reg) & line_mask) != last_line) && time_after(timeout, jiffies)); if (time_after(jiffies, timeout)) DRM_DEBUG_KMS("pipe_off wait timed out\n"); } } static const char *state_string(bool enabled) { return enabled ? "on" : "off"; } /* Only for pre-ILK configs */ static void assert_pll(struct drm_i915_private *dev_priv, enum i915_pipe pipe, bool state) { int reg; u32 val; bool cur_state; reg = DPLL(pipe); val = I915_READ(reg); cur_state = !!(val & DPLL_VCO_ENABLE); if (cur_state != state) kprintf("PLL state assertion failure (expected %s, current %s)\n", state_string(state), state_string(cur_state)); } #define assert_pll_enabled(d, p) assert_pll(d, p, true) #define assert_pll_disabled(d, p) assert_pll(d, p, false) /* For ILK+ */ static void assert_pch_pll(struct drm_i915_private *dev_priv, enum i915_pipe pipe, bool state) { int reg; u32 val; bool cur_state; if (HAS_PCH_CPT(dev_priv->dev)) { u32 pch_dpll; pch_dpll = I915_READ(PCH_DPLL_SEL); /* Make sure the selected PLL is enabled to the transcoder */ KASSERT(((pch_dpll >> (4 * pipe)) & 8) != 0, ("transcoder %d PLL not enabled\n", pipe)); /* Convert the transcoder pipe number to a pll pipe number */ pipe = (pch_dpll >> (4 * pipe)) & 1; } reg = _PCH_DPLL(pipe); val = I915_READ(reg); cur_state = !!(val & DPLL_VCO_ENABLE); if (cur_state != state) kprintf("PCH PLL state assertion failure (expected %s, current %s)\n", state_string(state), state_string(cur_state)); } #define assert_pch_pll_enabled(d, p) assert_pch_pll(d, p, true) #define assert_pch_pll_disabled(d, p) assert_pch_pll(d, p, false) static void assert_fdi_tx(struct drm_i915_private *dev_priv, enum i915_pipe pipe, bool state) { int reg; u32 val; bool cur_state; reg = FDI_TX_CTL(pipe); val = I915_READ(reg); cur_state = !!(val & FDI_TX_ENABLE); if (cur_state != state) kprintf("FDI TX state assertion failure (expected %s, current %s)\n", state_string(state), state_string(cur_state)); } #define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true) #define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false) static void assert_fdi_rx(struct drm_i915_private *dev_priv, enum i915_pipe pipe, bool state) { int reg; u32 val; bool cur_state; reg = FDI_RX_CTL(pipe); val = I915_READ(reg); cur_state = !!(val & FDI_RX_ENABLE); if (cur_state != state) kprintf("FDI RX state assertion failure (expected %s, current %s)\n", state_string(state), state_string(cur_state)); } #define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true) #define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false) static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv, enum i915_pipe pipe) { int reg; u32 val; /* ILK FDI PLL is always enabled */ if (dev_priv->info->gen == 5) return; reg = FDI_TX_CTL(pipe); val = I915_READ(reg); if (!(val & FDI_TX_PLL_ENABLE)) kprintf("FDI TX PLL assertion failure, should be active but is disabled\n"); } static void assert_fdi_rx_pll_enabled(struct drm_i915_private *dev_priv, enum i915_pipe pipe) { int reg; u32 val; reg = FDI_RX_CTL(pipe); val = I915_READ(reg); if (!(val & FDI_RX_PLL_ENABLE)) kprintf("FDI RX PLL assertion failure, should be active but is disabled\n"); } static void assert_panel_unlocked(struct drm_i915_private *dev_priv, enum i915_pipe pipe) { int pp_reg, lvds_reg; u32 val; enum i915_pipe panel_pipe = PIPE_A; bool locked = true; if (HAS_PCH_SPLIT(dev_priv->dev)) { pp_reg = PCH_PP_CONTROL; lvds_reg = PCH_LVDS; } else { pp_reg = PP_CONTROL; lvds_reg = LVDS; } val = I915_READ(pp_reg); if (!(val & PANEL_POWER_ON) || ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS)) locked = false; if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT) panel_pipe = PIPE_B; if (panel_pipe == pipe && locked) kprintf("panel assertion failure, pipe %c regs locked\n", pipe_name(pipe)); } void assert_pipe(struct drm_i915_private *dev_priv, enum i915_pipe pipe, bool state) { int reg; u32 val; bool cur_state; /* if we need the pipe A quirk it must be always on */ if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) state = true; reg = PIPECONF(pipe); val = I915_READ(reg); cur_state = !!(val & PIPECONF_ENABLE); if (cur_state != state) kprintf("pipe %c assertion failure (expected %s, current %s)\n", pipe_name(pipe), state_string(state), state_string(cur_state)); } static void assert_plane(struct drm_i915_private *dev_priv, enum plane plane, bool state) { int reg; u32 val; bool cur_state; reg = DSPCNTR(plane); val = I915_READ(reg); cur_state = !!(val & DISPLAY_PLANE_ENABLE); if (cur_state != state) kprintf("plane %c assertion failure, (expected %s, current %s)\n", plane_name(plane), state_string(state), state_string(cur_state)); } #define assert_plane_enabled(d, p) assert_plane(d, p, true) #define assert_plane_disabled(d, p) assert_plane(d, p, false) static void assert_planes_disabled(struct drm_i915_private *dev_priv, enum i915_pipe pipe) { int reg, i; u32 val; int cur_pipe; /* Planes are fixed to pipes on ILK+ */ if (HAS_PCH_SPLIT(dev_priv->dev)) { reg = DSPCNTR(pipe); val = I915_READ(reg); if ((val & DISPLAY_PLANE_ENABLE) != 0) kprintf("plane %c assertion failure, should be disabled but not\n", plane_name(pipe)); return; } /* Need to check both planes against the pipe */ for (i = 0; i < 2; i++) { reg = DSPCNTR(i); val = I915_READ(reg); cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >> DISPPLANE_SEL_PIPE_SHIFT; if ((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe) kprintf("plane %c assertion failure, should be off on pipe %c but is still active\n", plane_name(i), pipe_name(pipe)); } } static void assert_pch_refclk_enabled(struct drm_i915_private *dev_priv) { u32 val; bool enabled; val = I915_READ(PCH_DREF_CONTROL); enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK | DREF_SUPERSPREAD_SOURCE_MASK)); if (!enabled) kprintf("PCH refclk assertion failure, should be active but is disabled\n"); } static void assert_transcoder_disabled(struct drm_i915_private *dev_priv, enum i915_pipe pipe) { int reg; u32 val; bool enabled; reg = TRANSCONF(pipe); val = I915_READ(reg); enabled = !!(val & TRANS_ENABLE); if (enabled) kprintf("transcoder assertion failed, should be off on pipe %c but is still active\n", pipe_name(pipe)); } static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv, enum i915_pipe pipe, u32 val) { if ((val & PORT_ENABLE) == 0) return false; if (HAS_PCH_CPT(dev_priv->dev)) { if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe)) return false; } else { if ((val & TRANSCODER_MASK) != TRANSCODER(pipe)) return false; } return true; } static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv, enum i915_pipe pipe, u32 val) { if ((val & LVDS_PORT_EN) == 0) return false; if (HAS_PCH_CPT(dev_priv->dev)) { if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe)) return false; } else { if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe)) return false; } return true; } static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv, enum i915_pipe pipe, u32 val) { if ((val & ADPA_DAC_ENABLE) == 0) return false; if (HAS_PCH_CPT(dev_priv->dev)) { if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe)) return false; } else { if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe)) return false; } return true; } static bool dp_pipe_enabled(struct drm_i915_private *dev_priv, enum i915_pipe pipe, u32 port_sel, u32 val) { if ((val & DP_PORT_EN) == 0) return false; if (HAS_PCH_CPT(dev_priv->dev)) { u32 trans_dp_ctl_reg = TRANS_DP_CTL(pipe); u32 trans_dp_ctl = I915_READ(trans_dp_ctl_reg); if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel) return false; } else { if ((val & DP_PIPE_MASK) != (pipe << 30)) return false; } return true; } static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv, enum i915_pipe pipe, int reg, u32 port_sel) { u32 val = I915_READ(reg); if (dp_pipe_enabled(dev_priv, pipe, port_sel, val)) kprintf("PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n", reg, pipe_name(pipe)); } static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv, enum i915_pipe pipe, int reg) { u32 val = I915_READ(reg); if (hdmi_pipe_enabled(dev_priv, val, pipe)) kprintf("PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n", reg, pipe_name(pipe)); } static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv, enum i915_pipe pipe) { int reg; u32 val; assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B); assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C); assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D); reg = PCH_ADPA; val = I915_READ(reg); if (adpa_pipe_enabled(dev_priv, val, pipe)) kprintf("PCH VGA enabled on transcoder %c, should be disabled\n", pipe_name(pipe)); reg = PCH_LVDS; val = I915_READ(reg); if (lvds_pipe_enabled(dev_priv, val, pipe)) kprintf("PCH LVDS enabled on transcoder %c, should be disabled\n", pipe_name(pipe)); assert_pch_hdmi_disabled(dev_priv, pipe, HDMIB); assert_pch_hdmi_disabled(dev_priv, pipe, HDMIC); assert_pch_hdmi_disabled(dev_priv, pipe, HDMID); } /** * intel_enable_pll - enable a PLL * @dev_priv: i915 private structure * @pipe: pipe PLL to enable * * Enable @pipe's PLL so we can start pumping pixels from a plane. Check to * make sure the PLL reg is writable first though, since the panel write * protect mechanism may be enabled. * * Note! This is for pre-ILK only. */ static void intel_enable_pll(struct drm_i915_private *dev_priv, enum i915_pipe pipe) { int reg; u32 val; /* No really, not for ILK+ */ KASSERT(dev_priv->info->gen < 5, ("Wrong device gen")); /* PLL is protected by panel, make sure we can write it */ if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev)) assert_panel_unlocked(dev_priv, pipe); reg = DPLL(pipe); val = I915_READ(reg); val |= DPLL_VCO_ENABLE; /* We do this three times for luck */ I915_WRITE(reg, val); POSTING_READ(reg); DELAY(150); /* wait for warmup */ I915_WRITE(reg, val); POSTING_READ(reg); DELAY(150); /* wait for warmup */ I915_WRITE(reg, val); POSTING_READ(reg); DELAY(150); /* wait for warmup */ } /** * intel_disable_pll - disable a PLL * @dev_priv: i915 private structure * @pipe: pipe PLL to disable * * Disable the PLL for @pipe, making sure the pipe is off first. * * Note! This is for pre-ILK only. */ static void intel_disable_pll(struct drm_i915_private *dev_priv, enum i915_pipe pipe) { int reg; u32 val; /* Don't disable pipe A or pipe A PLLs if needed */ if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE)) return; /* Make sure the pipe isn't still relying on us */ assert_pipe_disabled(dev_priv, pipe); reg = DPLL(pipe); val = I915_READ(reg); val &= ~DPLL_VCO_ENABLE; I915_WRITE(reg, val); POSTING_READ(reg); } /** * intel_enable_pch_pll - enable PCH PLL * @dev_priv: i915 private structure * @pipe: pipe PLL to enable * * The PCH PLL needs to be enabled before the PCH transcoder, since it * drives the transcoder clock. */ static void intel_enable_pch_pll(struct drm_i915_private *dev_priv, enum i915_pipe pipe) { int reg; u32 val; if (pipe > 1) return; /* PCH only available on ILK+ */ KASSERT(dev_priv->info->gen >= 5, ("Wrong device gen")); /* PCH refclock must be enabled first */ assert_pch_refclk_enabled(dev_priv); reg = _PCH_DPLL(pipe); val = I915_READ(reg); val |= DPLL_VCO_ENABLE; I915_WRITE(reg, val); POSTING_READ(reg); DELAY(200); } static void intel_disable_pch_pll(struct drm_i915_private *dev_priv, enum i915_pipe pipe) { int reg; u32 val, pll_mask = TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL, pll_sel = TRANSC_DPLL_ENABLE; if (pipe > 1) return; /* PCH only available on ILK+ */ KASSERT(dev_priv->info->gen >= 5, ("Wrong device gen")); /* Make sure transcoder isn't still depending on us */ assert_transcoder_disabled(dev_priv, pipe); if (pipe == 0) pll_sel |= TRANSC_DPLLA_SEL; else if (pipe == 1) pll_sel |= TRANSC_DPLLB_SEL; if ((I915_READ(PCH_DPLL_SEL) & pll_mask) == pll_sel) return; reg = _PCH_DPLL(pipe); val = I915_READ(reg); val &= ~DPLL_VCO_ENABLE; I915_WRITE(reg, val); POSTING_READ(reg); DELAY(200); } static void intel_enable_transcoder(struct drm_i915_private *dev_priv, enum i915_pipe pipe) { int reg; u32 val, pipeconf_val; struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe]; /* PCH only available on ILK+ */ KASSERT(dev_priv->info->gen >= 5, ("Wrong device gen")); /* Make sure PCH DPLL is enabled */ assert_pch_pll_enabled(dev_priv, pipe); /* FDI must be feeding us bits for PCH ports */ assert_fdi_tx_enabled(dev_priv, pipe); assert_fdi_rx_enabled(dev_priv, pipe); reg = TRANSCONF(pipe); val = I915_READ(reg); pipeconf_val = I915_READ(PIPECONF(pipe)); if (HAS_PCH_IBX(dev_priv->dev)) { /* * make the BPC in transcoder be consistent with * that in pipeconf reg. */ val &= ~PIPE_BPC_MASK; val |= pipeconf_val & PIPE_BPC_MASK; } val &= ~TRANS_INTERLACE_MASK; if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK) if (HAS_PCH_IBX(dev_priv->dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) val |= TRANS_LEGACY_INTERLACED_ILK; else val |= TRANS_INTERLACED; else val |= TRANS_PROGRESSIVE; I915_WRITE(reg, val | TRANS_ENABLE); if (_intel_wait_for(dev_priv->dev, I915_READ(reg) & TRANS_STATE_ENABLE, 100, 1, "915trc")) DRM_ERROR("failed to enable transcoder %d\n", pipe); } static void intel_disable_transcoder(struct drm_i915_private *dev_priv, enum i915_pipe pipe) { int reg; u32 val; /* FDI relies on the transcoder */ assert_fdi_tx_disabled(dev_priv, pipe); assert_fdi_rx_disabled(dev_priv, pipe); /* Ports must be off as well */ assert_pch_ports_disabled(dev_priv, pipe); reg = TRANSCONF(pipe); val = I915_READ(reg); val &= ~TRANS_ENABLE; I915_WRITE(reg, val); /* wait for PCH transcoder off, transcoder state */ if (_intel_wait_for(dev_priv->dev, (I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50, 1, "915trd")) DRM_ERROR("failed to disable transcoder %d\n", pipe); } /** * intel_enable_pipe - enable a pipe, asserting requirements * @dev_priv: i915 private structure * @pipe: pipe to enable * @pch_port: on ILK+, is this pipe driving a PCH port or not * * Enable @pipe, making sure that various hardware specific requirements * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc. * * @pipe should be %PIPE_A or %PIPE_B. * * Will wait until the pipe is actually running (i.e. first vblank) before * returning. */ static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum i915_pipe pipe, bool pch_port) { int reg; u32 val; /* * A pipe without a PLL won't actually be able to drive bits from * a plane. On ILK+ the pipe PLLs are integrated, so we don't * need the check. */ if (!HAS_PCH_SPLIT(dev_priv->dev)) assert_pll_enabled(dev_priv, pipe); else { if (pch_port) { /* if driving the PCH, we need FDI enabled */ assert_fdi_rx_pll_enabled(dev_priv, pipe); assert_fdi_tx_pll_enabled(dev_priv, pipe); } /* FIXME: assert CPU port conditions for SNB+ */ } reg = PIPECONF(pipe); val = I915_READ(reg); if (val & PIPECONF_ENABLE) return; I915_WRITE(reg, val | PIPECONF_ENABLE); intel_wait_for_vblank(dev_priv->dev, pipe); } /** * intel_disable_pipe - disable a pipe, asserting requirements * @dev_priv: i915 private structure * @pipe: pipe to disable * * Disable @pipe, making sure that various hardware specific requirements * are met, if applicable, e.g. plane disabled, panel fitter off, etc. * * @pipe should be %PIPE_A or %PIPE_B. * * Will wait until the pipe has shut down before returning. */ static void intel_disable_pipe(struct drm_i915_private *dev_priv, enum i915_pipe pipe) { int reg; u32 val; /* * Make sure planes won't keep trying to pump pixels to us, * or we might hang the display. */ assert_planes_disabled(dev_priv, pipe); /* Don't disable pipe A or pipe A PLLs if needed */ if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE)) return; reg = PIPECONF(pipe); val = I915_READ(reg); if ((val & PIPECONF_ENABLE) == 0) return; I915_WRITE(reg, val & ~PIPECONF_ENABLE); intel_wait_for_pipe_off(dev_priv->dev, pipe); } /* * Plane regs are double buffered, going from enabled->disabled needs a * trigger in order to latch. The display address reg provides this. */ void intel_flush_display_plane(struct drm_i915_private *dev_priv, enum plane plane) { I915_WRITE(DSPADDR(plane), I915_READ(DSPADDR(plane))); I915_WRITE(DSPSURF(plane), I915_READ(DSPSURF(plane))); } /** * intel_enable_plane - enable a display plane on a given pipe * @dev_priv: i915 private structure * @plane: plane to enable * @pipe: pipe being fed * * Enable @plane on @pipe, making sure that @pipe is running first. */ static void intel_enable_plane(struct drm_i915_private *dev_priv, enum plane plane, enum i915_pipe pipe) { int reg; u32 val; /* If the pipe isn't enabled, we can't pump pixels and may hang */ assert_pipe_enabled(dev_priv, pipe); reg = DSPCNTR(plane); val = I915_READ(reg); if (val & DISPLAY_PLANE_ENABLE) return; I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE); intel_flush_display_plane(dev_priv, plane); intel_wait_for_vblank(dev_priv->dev, pipe); } /** * intel_disable_plane - disable a display plane * @dev_priv: i915 private structure * @plane: plane to disable * @pipe: pipe consuming the data * * Disable @plane; should be an independent operation. */ static void intel_disable_plane(struct drm_i915_private *dev_priv, enum plane plane, enum i915_pipe pipe) { int reg; u32 val; reg = DSPCNTR(plane); val = I915_READ(reg); if ((val & DISPLAY_PLANE_ENABLE) == 0) return; I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE); intel_flush_display_plane(dev_priv, plane); intel_wait_for_vblank(dev_priv->dev, pipe); } static void disable_pch_dp(struct drm_i915_private *dev_priv, enum i915_pipe pipe, int reg, u32 port_sel) { u32 val = I915_READ(reg); if (dp_pipe_enabled(dev_priv, pipe, port_sel, val)) { DRM_DEBUG_KMS("Disabling pch dp %x on pipe %d\n", reg, pipe); I915_WRITE(reg, val & ~DP_PORT_EN); } } static void disable_pch_hdmi(struct drm_i915_private *dev_priv, enum i915_pipe pipe, int reg) { u32 val = I915_READ(reg); if (hdmi_pipe_enabled(dev_priv, val, pipe)) { DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n", reg, pipe); I915_WRITE(reg, val & ~PORT_ENABLE); } } /* Disable any ports connected to this transcoder */ static void intel_disable_pch_ports(struct drm_i915_private *dev_priv, enum i915_pipe pipe) { u32 reg, val; val = I915_READ(PCH_PP_CONTROL); I915_WRITE(PCH_PP_CONTROL, val | PANEL_UNLOCK_REGS); disable_pch_dp(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B); disable_pch_dp(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C); disable_pch_dp(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D); reg = PCH_ADPA; val = I915_READ(reg); if (adpa_pipe_enabled(dev_priv, val, pipe)) I915_WRITE(reg, val & ~ADPA_DAC_ENABLE); reg = PCH_LVDS; val = I915_READ(reg); if (lvds_pipe_enabled(dev_priv, val, pipe)) { DRM_DEBUG_KMS("disable lvds on pipe %d val 0x%08x\n", pipe, val); I915_WRITE(reg, val & ~LVDS_PORT_EN); POSTING_READ(reg); DELAY(100); } disable_pch_hdmi(dev_priv, pipe, HDMIB); disable_pch_hdmi(dev_priv, pipe, HDMIC); disable_pch_hdmi(dev_priv, pipe, HDMID); } int intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_i915_gem_object *obj, struct intel_ring_buffer *pipelined) { struct drm_i915_private *dev_priv = dev->dev_private; u32 alignment; int ret; alignment = 0; /* shut gcc */ switch (obj->tiling_mode) { case I915_TILING_NONE: if (IS_BROADWATER(dev) || IS_CRESTLINE(dev)) alignment = 128 * 1024; else if (INTEL_INFO(dev)->gen >= 4) alignment = 4 * 1024; else alignment = 64 * 1024; break; case I915_TILING_X: /* pin() will align the object as required by fence */ alignment = 0; break; case I915_TILING_Y: /* FIXME: Is this true? */ DRM_ERROR("Y tiled not allowed for scan out buffers\n"); return -EINVAL; default: KASSERT(0, ("Wrong tiling for fb obj")); } dev_priv->mm.interruptible = false; ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined); if (ret) goto err_interruptible; /* Install a fence for tiled scan-out. Pre-i965 always needs a * fence, whereas 965+ only requires a fence if using * framebuffer compression. For simplicity, we always install * a fence as the cost is not that onerous. */ if (obj->tiling_mode != I915_TILING_NONE) { ret = i915_gem_object_get_fence(obj); if (ret) goto err_unpin; i915_gem_object_pin_fence(obj); } dev_priv->mm.interruptible = true; return 0; err_unpin: i915_gem_object_unpin(obj); err_interruptible: dev_priv->mm.interruptible = true; return ret; } void intel_unpin_fb_obj(struct drm_i915_gem_object *obj) { i915_gem_object_unpin_fence(obj); i915_gem_object_unpin(obj); } /* Computes the linear offset to the base tile and adjusts x, y. bytes per pixel * is assumed to be a power-of-two. */ unsigned long intel_gen4_compute_page_offset(int *x, int *y, unsigned int tiling_mode, unsigned int cpp, unsigned int pitch) { if (tiling_mode != I915_TILING_NONE) { unsigned int tile_rows, tiles; tile_rows = *y / 8; *y %= 8; tiles = *x / (512/cpp); *x %= 512/cpp; return tile_rows * pitch * 8 + tiles * 4096; } else { unsigned int offset; offset = *y * pitch + *x * cpp; *y = 0; *x = (offset & 4095) / cpp; return offset & -4096; } } static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb, int x, int y) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_framebuffer *intel_fb; struct drm_i915_gem_object *obj; int plane = intel_crtc->plane; unsigned long Start, Offset; u32 dspcntr; u32 reg; switch (plane) { case 0: case 1: break; default: DRM_ERROR("Can't update plane %d in SAREA\n", plane); return -EINVAL; } intel_fb = to_intel_framebuffer(fb); obj = intel_fb->obj; reg = DSPCNTR(plane); dspcntr = I915_READ(reg); /* Mask out pixel format bits in case we change it */ dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; switch (fb->bits_per_pixel) { case 8: dspcntr |= DISPPLANE_8BPP; break; case 16: if (fb->depth == 15) dspcntr |= DISPPLANE_BGRX555; else dspcntr |= DISPPLANE_BGRX565; break; case 24: case 32: dspcntr |= DISPPLANE_BGRX888; break; default: DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel); return -EINVAL; } if (INTEL_INFO(dev)->gen >= 4) { if (obj->tiling_mode != I915_TILING_NONE) dspcntr |= DISPPLANE_TILED; else dspcntr &= ~DISPPLANE_TILED; } I915_WRITE(reg, dspcntr); Start = obj->gtt_offset; Offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8); DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n", Start, Offset, x, y, fb->pitches[0]); I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]); if (INTEL_INFO(dev)->gen >= 4) { I915_WRITE(DSPSURF(plane), Start); I915_WRITE(DSPTILEOFF(plane), (y << 16) | x); I915_WRITE(DSPADDR(plane), Offset); } else I915_WRITE(DSPADDR(plane), Start + Offset); POSTING_READ(reg); return (0); } static int ironlake_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb, int x, int y) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_framebuffer *intel_fb; struct drm_i915_gem_object *obj; int plane = intel_crtc->plane; unsigned long Start, Offset; u32 dspcntr; u32 reg; switch (plane) { case 0: case 1: case 2: break; default: DRM_ERROR("Can't update plane %d in SAREA\n", plane); return -EINVAL; } intel_fb = to_intel_framebuffer(fb); obj = intel_fb->obj; reg = DSPCNTR(plane); dspcntr = I915_READ(reg); /* Mask out pixel format bits in case we change it */ dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; switch (fb->bits_per_pixel) { case 8: dspcntr |= DISPPLANE_8BPP; break; case 16: if (fb->depth != 16) { DRM_ERROR("bpp 16, depth %d\n", fb->depth); return -EINVAL; } dspcntr |= DISPPLANE_BGRX565; break; case 24: case 32: if (fb->depth == 24) dspcntr |= DISPPLANE_BGRX888; else if (fb->depth == 30) dspcntr |= DISPPLANE_BGRX101010; else { DRM_ERROR("bpp %d depth %d\n", fb->bits_per_pixel, fb->depth); return -EINVAL; } break; default: DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel); return -EINVAL; } if (obj->tiling_mode != I915_TILING_NONE) dspcntr |= DISPPLANE_TILED; else dspcntr &= ~DISPPLANE_TILED; /* must disable */ dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE; I915_WRITE(reg, dspcntr); Start = obj->gtt_offset; Offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8); DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n", Start, Offset, x, y, fb->pitches[0]); I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]); I915_WRITE(DSPSURF(plane), Start); I915_WRITE(DSPTILEOFF(plane), (y << 16) | x); I915_WRITE(DSPADDR(plane), Offset); POSTING_READ(reg); return 0; } /* Assume fb object is pinned & idle & fenced and just update base pointers */ static int intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, int x, int y, enum mode_set_atomic state) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; if (dev_priv->display.disable_fbc) dev_priv->display.disable_fbc(dev); intel_increase_pllclock(crtc); return dev_priv->display.update_plane(crtc, fb, x, y); } static int intel_finish_fb(struct drm_framebuffer *old_fb) { struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj; struct drm_device *dev = obj->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; bool was_interruptible = dev_priv->mm.interruptible; int ret; /* XXX */ lockmgr(&dev->event_lock, LK_EXCLUSIVE); while (!atomic_read(&dev_priv->mm.wedged) && atomic_read(&obj->pending_flip) != 0) { lksleep(&obj->pending_flip, &dev->event_lock, 0, "915flp", 0); } /* XXX */ lockmgr(&dev->event_lock, LK_RELEASE); /* Big Hammer, we also need to ensure that any pending * MI_WAIT_FOR_EVENT inside a user batch buffer on the * current scanout is retired before unpinning the old * framebuffer. * * This should only fail upon a hung GPU, in which case we * can safely continue. */ dev_priv->mm.interruptible = false; ret = i915_gem_object_finish_gpu(obj); dev_priv->mm.interruptible = was_interruptible; return ret; } static int intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) { struct drm_device *dev = crtc->dev; #if 0 struct drm_i915_master_private *master_priv; #else drm_i915_private_t *dev_priv = dev->dev_private; #endif struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int ret; /* no fb bound */ if (!crtc->fb) { DRM_ERROR("No FB bound\n"); return 0; } switch (intel_crtc->plane) { case 0: case 1: break; case 2: if (IS_IVYBRIDGE(dev)) break; /* fall through otherwise */ default: DRM_ERROR("no plane for crtc\n"); return -EINVAL; } DRM_LOCK(dev); ret = intel_pin_and_fence_fb_obj(dev, to_intel_framebuffer(crtc->fb)->obj, NULL); if (ret != 0) { DRM_UNLOCK(dev); DRM_ERROR("pin & fence failed\n"); return ret; } if (old_fb) intel_finish_fb(old_fb); ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y, LEAVE_ATOMIC_MODE_SET); if (ret) { intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj); DRM_UNLOCK(dev); DRM_ERROR("failed to update base address\n"); return ret; } if (old_fb) { intel_wait_for_vblank(dev, intel_crtc->pipe); intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj); } DRM_UNLOCK(dev); #if 0 if (!dev->primary->master) return 0; master_priv = dev->primary->master->driver_priv; if (!master_priv->sarea_priv) return 0; if (intel_crtc->pipe) { master_priv->sarea_priv->pipeB_x = x; master_priv->sarea_priv->pipeB_y = y; } else { master_priv->sarea_priv->pipeA_x = x; master_priv->sarea_priv->pipeA_y = y; } #else if (!dev_priv->sarea_priv) return 0; if (intel_crtc->pipe) { dev_priv->sarea_priv->planeB_x = x; dev_priv->sarea_priv->planeB_y = y; } else { dev_priv->sarea_priv->planeA_x = x; dev_priv->sarea_priv->planeA_y = y; } #endif return 0; } static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; u32 dpa_ctl; DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock); dpa_ctl = I915_READ(DP_A); dpa_ctl &= ~DP_PLL_FREQ_MASK; if (clock < 200000) { u32 temp; dpa_ctl |= DP_PLL_FREQ_160MHZ; /* workaround for 160Mhz: 1) program 0x4600c bits 15:0 = 0x8124 2) program 0x46010 bit 0 = 1 3) program 0x46034 bit 24 = 1 4) program 0x64000 bit 14 = 1 */ temp = I915_READ(0x4600c); temp &= 0xffff0000; I915_WRITE(0x4600c, temp | 0x8124); temp = I915_READ(0x46010); I915_WRITE(0x46010, temp | 1); temp = I915_READ(0x46034); I915_WRITE(0x46034, temp | (1 << 24)); } else { dpa_ctl |= DP_PLL_FREQ_270MHZ; } I915_WRITE(DP_A, dpa_ctl); POSTING_READ(DP_A); DELAY(500); } static void intel_fdi_normal_train(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; u32 reg, temp; /* enable normal train */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); if (IS_IVYBRIDGE(dev)) { temp &= ~FDI_LINK_TRAIN_NONE_IVB; temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE; } else { temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE; } I915_WRITE(reg, temp); reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); if (HAS_PCH_CPT(dev)) { temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; temp |= FDI_LINK_TRAIN_NORMAL_CPT; } else { temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_NONE; } I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE); /* wait one idle pattern time */ POSTING_READ(reg); DELAY(1000); /* IVB wants error correction enabled */ if (IS_IVYBRIDGE(dev)) I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE | FDI_FE_ERRC_ENABLE); } static void cpt_phase_pointer_enable(struct drm_device *dev, int pipe) { struct drm_i915_private *dev_priv = dev->dev_private; u32 flags = I915_READ(SOUTH_CHICKEN1); flags |= FDI_PHASE_SYNC_OVR(pipe); I915_WRITE(SOUTH_CHICKEN1, flags); /* once to unlock... */ flags |= FDI_PHASE_SYNC_EN(pipe); I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to enable */ POSTING_READ(SOUTH_CHICKEN1); } /* The FDI link training functions for ILK/Ibexpeak. */ static void ironlake_fdi_link_train(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; u32 reg, temp, tries; /* FDI needs bits from pipe & plane first */ assert_pipe_enabled(dev_priv, pipe); assert_plane_enabled(dev_priv, plane); /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit for train result */ reg = FDI_RX_IMR(pipe); temp = I915_READ(reg); temp &= ~FDI_RX_SYMBOL_LOCK; temp &= ~FDI_RX_BIT_LOCK; I915_WRITE(reg, temp); I915_READ(reg); DELAY(150); /* enable CPU FDI TX and PCH FDI RX */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~(7 << 19); temp |= (intel_crtc->fdi_lanes - 1) << 19; temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; I915_WRITE(reg, temp | FDI_TX_ENABLE); reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; I915_WRITE(reg, temp | FDI_RX_ENABLE); POSTING_READ(reg); DELAY(150); /* Ironlake workaround, enable clock pointer after FDI enable*/ if (HAS_PCH_IBX(dev)) { I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR); I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR | FDI_RX_PHASE_SYNC_POINTER_EN); } reg = FDI_RX_IIR(pipe); for (tries = 0; tries < 5; tries++) { temp = I915_READ(reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if ((temp & FDI_RX_BIT_LOCK)) { DRM_DEBUG_KMS("FDI train 1 done.\n"); I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); break; } } if (tries == 5) DRM_ERROR("FDI train 1 fail!\n"); /* Train 2 */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_2; I915_WRITE(reg, temp); reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_2; I915_WRITE(reg, temp); POSTING_READ(reg); DELAY(150); reg = FDI_RX_IIR(pipe); for (tries = 0; tries < 5; tries++) { temp = I915_READ(reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if (temp & FDI_RX_SYMBOL_LOCK) { I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); DRM_DEBUG_KMS("FDI train 2 done.\n"); break; } } if (tries == 5) DRM_ERROR("FDI train 2 fail!\n"); DRM_DEBUG_KMS("FDI train done\n"); } static const int snb_b_fdi_train_param[] = { FDI_LINK_TRAIN_400MV_0DB_SNB_B, FDI_LINK_TRAIN_400MV_6DB_SNB_B, FDI_LINK_TRAIN_600MV_3_5DB_SNB_B, FDI_LINK_TRAIN_800MV_0DB_SNB_B, }; /* The FDI link training functions for SNB/Cougarpoint. */ static void gen6_fdi_link_train(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; u32 reg, temp, i; /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit for train result */ reg = FDI_RX_IMR(pipe); temp = I915_READ(reg); temp &= ~FDI_RX_SYMBOL_LOCK; temp &= ~FDI_RX_BIT_LOCK; I915_WRITE(reg, temp); POSTING_READ(reg); DELAY(150); /* enable CPU FDI TX and PCH FDI RX */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~(7 << 19); temp |= (intel_crtc->fdi_lanes - 1) << 19; temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; /* SNB-B */ temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; I915_WRITE(reg, temp | FDI_TX_ENABLE); reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); if (HAS_PCH_CPT(dev)) { temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; } else { temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; } I915_WRITE(reg, temp | FDI_RX_ENABLE); POSTING_READ(reg); DELAY(150); if (HAS_PCH_CPT(dev)) cpt_phase_pointer_enable(dev, pipe); for (i = 0; i < 4; i++) { reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; temp |= snb_b_fdi_train_param[i]; I915_WRITE(reg, temp); POSTING_READ(reg); DELAY(500); reg = FDI_RX_IIR(pipe); temp = I915_READ(reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if (temp & FDI_RX_BIT_LOCK) { I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); DRM_DEBUG_KMS("FDI train 1 done.\n"); break; } } if (i == 4) DRM_ERROR("FDI train 1 fail!\n"); /* Train 2 */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_2; if (IS_GEN6(dev)) { temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; /* SNB-B */ temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; } I915_WRITE(reg, temp); reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); if (HAS_PCH_CPT(dev)) { temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; temp |= FDI_LINK_TRAIN_PATTERN_2_CPT; } else { temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_2; } I915_WRITE(reg, temp); POSTING_READ(reg); DELAY(150); for (i = 0; i < 4; i++) { reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; temp |= snb_b_fdi_train_param[i]; I915_WRITE(reg, temp); POSTING_READ(reg); DELAY(500); reg = FDI_RX_IIR(pipe); temp = I915_READ(reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if (temp & FDI_RX_SYMBOL_LOCK) { I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); DRM_DEBUG_KMS("FDI train 2 done.\n"); break; } } if (i == 4) DRM_ERROR("FDI train 2 fail!\n"); DRM_DEBUG_KMS("FDI train done.\n"); } /* Manual link training for Ivy Bridge A0 parts */ static void ivb_manual_fdi_link_train(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; u32 reg, temp, i; /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit for train result */ reg = FDI_RX_IMR(pipe); temp = I915_READ(reg); temp &= ~FDI_RX_SYMBOL_LOCK; temp &= ~FDI_RX_BIT_LOCK; I915_WRITE(reg, temp); POSTING_READ(reg); DELAY(150); /* enable CPU FDI TX and PCH FDI RX */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~(7 << 19); temp |= (intel_crtc->fdi_lanes - 1) << 19; temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB); temp |= FDI_LINK_TRAIN_PATTERN_1_IVB; temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; temp |= FDI_COMPOSITE_SYNC; I915_WRITE(reg, temp | FDI_TX_ENABLE); reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_AUTO; temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; temp |= FDI_COMPOSITE_SYNC; I915_WRITE(reg, temp | FDI_RX_ENABLE); POSTING_READ(reg); DELAY(150); for (i = 0; i < 4; i++) { reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; temp |= snb_b_fdi_train_param[i]; I915_WRITE(reg, temp); POSTING_READ(reg); DELAY(500); reg = FDI_RX_IIR(pipe); temp = I915_READ(reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if (temp & FDI_RX_BIT_LOCK || (I915_READ(reg) & FDI_RX_BIT_LOCK)) { I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); DRM_DEBUG_KMS("FDI train 1 done.\n"); break; } } if (i == 4) DRM_ERROR("FDI train 1 fail!\n"); /* Train 2 */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE_IVB; temp |= FDI_LINK_TRAIN_PATTERN_2_IVB; temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; I915_WRITE(reg, temp); reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; temp |= FDI_LINK_TRAIN_PATTERN_2_CPT; I915_WRITE(reg, temp); POSTING_READ(reg); DELAY(150); for (i = 0; i < 4; i++ ) { reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; temp |= snb_b_fdi_train_param[i]; I915_WRITE(reg, temp); POSTING_READ(reg); DELAY(500); reg = FDI_RX_IIR(pipe); temp = I915_READ(reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if (temp & FDI_RX_SYMBOL_LOCK) { I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); DRM_DEBUG_KMS("FDI train 2 done.\n"); break; } } if (i == 4) DRM_ERROR("FDI train 2 fail!\n"); DRM_DEBUG_KMS("FDI train done.\n"); } static void ironlake_fdi_pll_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; u32 reg, temp; /* Write the TU size bits so error detection works */ I915_WRITE(FDI_RX_TUSIZE1(pipe), I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK); /* enable PCH FDI RX PLL, wait warmup plus DMI latency */ reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); temp &= ~((0x7 << 19) | (0x7 << 16)); temp |= (intel_crtc->fdi_lanes - 1) << 19; temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE); POSTING_READ(reg); DELAY(200); /* Switch from Rawclk to PCDclk */ temp = I915_READ(reg); I915_WRITE(reg, temp | FDI_PCDCLK); POSTING_READ(reg); DELAY(200); /* Enable CPU FDI TX PLL, always on for Ironlake */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); if ((temp & FDI_TX_PLL_ENABLE) == 0) { I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE); POSTING_READ(reg); DELAY(100); } } static void cpt_phase_pointer_disable(struct drm_device *dev, int pipe) { struct drm_i915_private *dev_priv = dev->dev_private; u32 flags = I915_READ(SOUTH_CHICKEN1); flags &= ~(FDI_PHASE_SYNC_EN(pipe)); I915_WRITE(SOUTH_CHICKEN1, flags); /* once to disable... */ flags &= ~(FDI_PHASE_SYNC_OVR(pipe)); I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to lock */ POSTING_READ(SOUTH_CHICKEN1); } static void ironlake_fdi_disable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; u32 reg, temp; /* disable CPU FDI tx and PCH FDI rx */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); I915_WRITE(reg, temp & ~FDI_TX_ENABLE); POSTING_READ(reg); reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); temp &= ~(0x7 << 16); temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; I915_WRITE(reg, temp & ~FDI_RX_ENABLE); POSTING_READ(reg); DELAY(100); /* Ironlake workaround, disable clock pointer after downing FDI */ if (HAS_PCH_IBX(dev)) { I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR); I915_WRITE(FDI_RX_CHICKEN(pipe), I915_READ(FDI_RX_CHICKEN(pipe) & ~FDI_RX_PHASE_SYNC_POINTER_EN)); } else if (HAS_PCH_CPT(dev)) { cpt_phase_pointer_disable(dev, pipe); } /* still set train pattern 1 */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; I915_WRITE(reg, temp); reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); if (HAS_PCH_CPT(dev)) { temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; } else { temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; } /* BPC in FDI rx is consistent with that in PIPECONF */ temp &= ~(0x07 << 16); temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; I915_WRITE(reg, temp); POSTING_READ(reg); DELAY(100); } /* * When we disable a pipe, we need to clear any pending scanline wait events * to avoid hanging the ring, which we assume we are waiting on. */ static void intel_clear_scanline_wait(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_ring_buffer *ring; u32 tmp; if (IS_GEN2(dev)) /* Can't break the hang on i8xx */ return; ring = LP_RING(dev_priv); tmp = I915_READ_CTL(ring); if (tmp & RING_WAIT) I915_WRITE_CTL(ring, tmp); } static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc) { struct drm_i915_gem_object *obj; struct drm_i915_private *dev_priv; struct drm_device *dev; if (crtc->fb == NULL) return; obj = to_intel_framebuffer(crtc->fb)->obj; dev = crtc->dev; dev_priv = dev->dev_private; lockmgr(&dev->event_lock, LK_EXCLUSIVE); while (atomic_read(&obj->pending_flip) != 0) lksleep(&obj->pending_flip, &dev->event_lock, 0, "915wfl", 0); lockmgr(&dev->event_lock, LK_RELEASE); } static bool intel_crtc_driving_pch(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_mode_config *mode_config = &dev->mode_config; struct intel_encoder *encoder; /* * If there's a non-PCH eDP on this crtc, it must be DP_A, and that * must be driven by its own crtc; no sharing is possible. */ list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { if (encoder->base.crtc != crtc) continue; switch (encoder->type) { case INTEL_OUTPUT_EDP: if (!intel_encoder_is_pch_edp(&encoder->base)) return false; continue; } } return true; } /* * Enable PCH resources required for PCH ports: * - PCH PLLs * - FDI training & RX/TX * - update transcoder timings * - DP transcoding bits * - transcoder */ static void ironlake_pch_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; u32 reg, temp, transc_sel; /* For PCH output, training FDI link */ dev_priv->display.fdi_link_train(crtc); intel_enable_pch_pll(dev_priv, pipe); if (HAS_PCH_CPT(dev)) { transc_sel = intel_crtc->use_pll_a ? TRANSC_DPLLA_SEL : TRANSC_DPLLB_SEL; /* Be sure PCH DPLL SEL is set */ temp = I915_READ(PCH_DPLL_SEL); if (pipe == 0) { temp &= ~(TRANSA_DPLLB_SEL); temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL); } else if (pipe == 1) { temp &= ~(TRANSB_DPLLB_SEL); temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL); } else if (pipe == 2) { temp &= ~(TRANSC_DPLLB_SEL); temp |= (TRANSC_DPLL_ENABLE | transc_sel); } I915_WRITE(PCH_DPLL_SEL, temp); } /* set transcoder timing, panel must allow it */ assert_panel_unlocked(dev_priv, pipe); I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(pipe))); I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(pipe))); I915_WRITE(TRANS_HSYNC(pipe), I915_READ(HSYNC(pipe))); I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(pipe))); I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe))); I915_WRITE(TRANS_VSYNC(pipe), I915_READ(VSYNC(pipe))); I915_WRITE(TRANS_VSYNCSHIFT(pipe), I915_READ(VSYNCSHIFT(pipe))); intel_fdi_normal_train(crtc); /* For PCH DP, enable TRANS_DP_CTL */ if (HAS_PCH_CPT(dev) && (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) { u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5; reg = TRANS_DP_CTL(pipe); temp = I915_READ(reg); temp &= ~(TRANS_DP_PORT_SEL_MASK | TRANS_DP_SYNC_MASK | TRANS_DP_BPC_MASK); temp |= (TRANS_DP_OUTPUT_ENABLE | TRANS_DP_ENH_FRAMING); temp |= bpc << 9; /* same format but at 11:9 */ if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC) temp |= TRANS_DP_HSYNC_ACTIVE_HIGH; if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC) temp |= TRANS_DP_VSYNC_ACTIVE_HIGH; switch (intel_trans_dp_port_sel(crtc)) { case PCH_DP_B: temp |= TRANS_DP_PORT_SEL_B; break; case PCH_DP_C: temp |= TRANS_DP_PORT_SEL_C; break; case PCH_DP_D: temp |= TRANS_DP_PORT_SEL_D; break; default: DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n"); temp |= TRANS_DP_PORT_SEL_B; break; } I915_WRITE(reg, temp); } intel_enable_transcoder(dev_priv, pipe); } void intel_cpt_verify_modeset(struct drm_device *dev, int pipe) { struct drm_i915_private *dev_priv = dev->dev_private; int dslreg = PIPEDSL(pipe); u32 temp; temp = I915_READ(dslreg); udelay(500); if (wait_for(I915_READ(dslreg) != temp, 5)) { if (wait_for(I915_READ(dslreg) != temp, 5)) DRM_ERROR("mode set failed: pipe %d stuck\n", pipe); } } static void ironlake_crtc_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; u32 temp; bool is_pch_port; if (intel_crtc->active) return; intel_crtc->active = true; intel_update_watermarks(dev); if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { temp = I915_READ(PCH_LVDS); if ((temp & LVDS_PORT_EN) == 0) I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN); } is_pch_port = intel_crtc_driving_pch(crtc); if (is_pch_port) ironlake_fdi_pll_enable(crtc); else ironlake_fdi_disable(crtc); /* Enable panel fitting for LVDS */ if (dev_priv->pch_pf_size && (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) || HAS_eDP)) { /* Force use of hard-coded filter coefficients * as some pre-programmed values are broken, * e.g. x201. */ I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3); I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos); I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size); } intel_enable_pipe(dev_priv, pipe, is_pch_port); intel_enable_plane(dev_priv, plane, pipe); if (is_pch_port) ironlake_pch_enable(crtc); intel_crtc_load_lut(crtc); DRM_LOCK(dev); intel_update_fbc(dev); DRM_UNLOCK(dev); intel_crtc_update_cursor(crtc, true); } static void ironlake_crtc_disable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; u32 reg, temp; if (!intel_crtc->active) return; intel_crtc_wait_for_pending_flips(crtc); drm_vblank_off(dev, pipe); intel_crtc_update_cursor(crtc, false); intel_disable_plane(dev_priv, plane, pipe); if (dev_priv->cfb_plane == plane) intel_disable_fbc(dev); intel_disable_pipe(dev_priv, pipe); /* Disable PF */ I915_WRITE(PF_CTL(pipe), 0); I915_WRITE(PF_WIN_SZ(pipe), 0); ironlake_fdi_disable(crtc); /* This is a horrible layering violation; we should be doing this in * the connector/encoder ->prepare instead, but we don't always have * enough information there about the config to know whether it will * actually be necessary or just cause undesired flicker. */ intel_disable_pch_ports(dev_priv, pipe); intel_disable_transcoder(dev_priv, pipe); if (HAS_PCH_CPT(dev)) { /* disable TRANS_DP_CTL */ reg = TRANS_DP_CTL(pipe); temp = I915_READ(reg); temp &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK); temp |= TRANS_DP_PORT_SEL_NONE; I915_WRITE(reg, temp); /* disable DPLL_SEL */ temp = I915_READ(PCH_DPLL_SEL); switch (pipe) { case 0: temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL); break; case 1: temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL); break; case 2: /* C shares PLL A or B */ temp &= ~(TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL); break; default: KASSERT(1, ("Wrong pipe %d", pipe)); /* wtf */ } I915_WRITE(PCH_DPLL_SEL, temp); } /* disable PCH DPLL */ if (!intel_crtc->no_pll) intel_disable_pch_pll(dev_priv, pipe); /* Switch from PCDclk to Rawclk */ reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); I915_WRITE(reg, temp & ~FDI_PCDCLK); /* Disable CPU FDI TX PLL */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE); POSTING_READ(reg); DELAY(100); reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE); /* Wait for the clocks to turn off. */ POSTING_READ(reg); DELAY(100); intel_crtc->active = false; intel_update_watermarks(dev); DRM_LOCK(dev); intel_update_fbc(dev); intel_clear_scanline_wait(dev); DRM_UNLOCK(dev); } static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; /* XXX: When our outputs are all unaware of DPMS modes other than off * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. */ switch (mode) { case DRM_MODE_DPMS_ON: case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane); ironlake_crtc_enable(crtc); break; case DRM_MODE_DPMS_OFF: DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane); ironlake_crtc_disable(crtc); break; } } static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable) { if (!enable && intel_crtc->overlay) { struct drm_device *dev = intel_crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; DRM_LOCK(dev); dev_priv->mm.interruptible = false; (void) intel_overlay_switch_off(intel_crtc->overlay); dev_priv->mm.interruptible = true; DRM_UNLOCK(dev); } /* Let userspace switch the overlay on again. In most cases userspace * has to recompute where to put it anyway. */ } static void i9xx_crtc_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; if (intel_crtc->active) return; intel_crtc->active = true; intel_update_watermarks(dev); intel_enable_pll(dev_priv, pipe); intel_enable_pipe(dev_priv, pipe, false); intel_enable_plane(dev_priv, plane, pipe); intel_crtc_load_lut(crtc); intel_update_fbc(dev); /* Give the overlay scaler a chance to enable if it's on this pipe */ intel_crtc_dpms_overlay(intel_crtc, true); intel_crtc_update_cursor(crtc, true); } static void i9xx_crtc_disable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; if (!intel_crtc->active) return; /* Give the overlay scaler a chance to disable if it's on this pipe */ intel_crtc_wait_for_pending_flips(crtc); drm_vblank_off(dev, pipe); intel_crtc_dpms_overlay(intel_crtc, false); intel_crtc_update_cursor(crtc, false); if (dev_priv->cfb_plane == plane) intel_disable_fbc(dev); intel_disable_plane(dev_priv, plane, pipe); intel_disable_pipe(dev_priv, pipe); intel_disable_pll(dev_priv, pipe); intel_crtc->active = false; intel_update_fbc(dev); intel_update_watermarks(dev); intel_clear_scanline_wait(dev); } static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) { /* XXX: When our outputs are all unaware of DPMS modes other than off * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. */ switch (mode) { case DRM_MODE_DPMS_ON: case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: i9xx_crtc_enable(crtc); break; case DRM_MODE_DPMS_OFF: i9xx_crtc_disable(crtc); break; } } /** * Sets the power management mode of the pipe and plane. */ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; #if 0 struct drm_i915_master_private *master_priv; #endif struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; bool enabled; if (intel_crtc->dpms_mode == mode) return; intel_crtc->dpms_mode = mode; dev_priv->display.dpms(crtc, mode); #if 0 if (!dev->primary->master) return; master_priv = dev->primary->master->driver_priv; if (!master_priv->sarea_priv) return; #else if (!dev_priv->sarea_priv) return; #endif enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF; switch (pipe) { case 0: #if 0 master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0; master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0; #else dev_priv->sarea_priv->planeA_w = enabled ? crtc->mode.hdisplay : 0; dev_priv->sarea_priv->planeA_h = enabled ? crtc->mode.vdisplay : 0; #endif break; case 1: #if 0 master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0; master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0; #else dev_priv->sarea_priv->planeB_w = enabled ? crtc->mode.hdisplay : 0; dev_priv->sarea_priv->planeB_h = enabled ? crtc->mode.vdisplay : 0; #endif break; default: DRM_ERROR("Can't update pipe %c in SAREA\n", pipe_name(pipe)); break; } } static void intel_crtc_disable(struct drm_crtc *crtc) { struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; struct drm_device *dev = crtc->dev; /* Flush any pending WAITs before we disable the pipe. Note that * we need to drop the struct_mutex in order to acquire it again * during the lowlevel dpms routines around a couple of the * operations. It does not look trivial nor desirable to move * that locking higher. So instead we leave a window for the * submission of further commands on the fb before we can actually * disable it. This race with userspace exists anyway, and we can * only rely on the pipe being disabled by userspace after it * receives the hotplug notification and has flushed any pending * batches. */ if (crtc->fb) { DRM_LOCK(dev); intel_finish_fb(crtc->fb); DRM_UNLOCK(dev); } crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane); assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe); if (crtc->fb) { DRM_LOCK(dev); intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj); DRM_UNLOCK(dev); } } /* Prepare for a mode set. * * Note we could be a lot smarter here. We need to figure out which outputs * will be enabled, which disabled (in short, how the config will changes) * and perform the minimum necessary steps to accomplish that, e.g. updating * watermarks, FBC configuration, making sure PLLs are programmed correctly, * panel fitting is in the proper state, etc. */ static void i9xx_crtc_prepare(struct drm_crtc *crtc) { i9xx_crtc_disable(crtc); } static void i9xx_crtc_commit(struct drm_crtc *crtc) { i9xx_crtc_enable(crtc); } static void ironlake_crtc_prepare(struct drm_crtc *crtc) { ironlake_crtc_disable(crtc); } static void ironlake_crtc_commit(struct drm_crtc *crtc) { ironlake_crtc_enable(crtc); } void intel_encoder_prepare(struct drm_encoder *encoder) { struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; /* lvds has its own version of prepare see intel_lvds_prepare */ encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF); } void intel_encoder_commit(struct drm_encoder *encoder) { struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; struct drm_device *dev = encoder->dev; struct intel_encoder *intel_encoder = to_intel_encoder(encoder); struct intel_crtc *intel_crtc = to_intel_crtc(intel_encoder->base.crtc); /* lvds has its own version of commit see intel_lvds_commit */ encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); if (HAS_PCH_CPT(dev)) intel_cpt_verify_modeset(dev, intel_crtc->pipe); } void intel_encoder_destroy(struct drm_encoder *encoder) { struct intel_encoder *intel_encoder = to_intel_encoder(encoder); drm_encoder_cleanup(encoder); drm_free(intel_encoder, DRM_MEM_KMS); } static bool intel_crtc_mode_fixup(struct drm_crtc *crtc, const struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { struct drm_device *dev = crtc->dev; if (HAS_PCH_SPLIT(dev)) { /* FDI link clock is fixed at 2.7G */ if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4) return false; } /* All interlaced capable intel hw wants timings in frames. Note though * that intel_lvds_mode_fixup does some funny tricks with the crtc * timings, so we need to be careful not to clobber these.*/ if (!(adjusted_mode->private_flags & INTEL_MODE_CRTC_TIMINGS_SET)) drm_mode_set_crtcinfo(adjusted_mode, 0); return true; } static int valleyview_get_display_clock_speed(struct drm_device *dev) { return 400000; /* FIXME */ } static int i945_get_display_clock_speed(struct drm_device *dev) { return 400000; } static int i915_get_display_clock_speed(struct drm_device *dev) { return 333000; } static int i9xx_misc_get_display_clock_speed(struct drm_device *dev) { return 200000; } static int i915gm_get_display_clock_speed(struct drm_device *dev) { u16 gcfgc = 0; gcfgc = pci_read_config(dev->dev, GCFGC, 2); if (gcfgc & GC_LOW_FREQUENCY_ENABLE) return 133000; else { switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { case GC_DISPLAY_CLOCK_333_MHZ: return 333000; default: case GC_DISPLAY_CLOCK_190_200_MHZ: return 190000; } } } static int i865_get_display_clock_speed(struct drm_device *dev) { return 266000; } static int i855_get_display_clock_speed(struct drm_device *dev) { u16 hpllcc = 0; /* Assume that the hardware is in the high speed state. This * should be the default. */ switch (hpllcc & GC_CLOCK_CONTROL_MASK) { case GC_CLOCK_133_200: case GC_CLOCK_100_200: return 200000; case GC_CLOCK_166_250: return 250000; case GC_CLOCK_100_133: return 133000; } /* Shouldn't happen */ return 0; } static int i830_get_display_clock_speed(struct drm_device *dev) { return 133000; } struct fdi_m_n { u32 tu; u32 gmch_m; u32 gmch_n; u32 link_m; u32 link_n; }; static void fdi_reduce_ratio(u32 *num, u32 *den) { while (*num > 0xffffff || *den > 0xffffff) { *num >>= 1; *den >>= 1; } } static void ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock, int link_clock, struct fdi_m_n *m_n) { m_n->tu = 64; /* default size */ /* BUG_ON(pixel_clock > INT_MAX / 36); */ m_n->gmch_m = bits_per_pixel * pixel_clock; m_n->gmch_n = link_clock * nlanes * 8; fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); m_n->link_m = pixel_clock; m_n->link_n = link_clock; fdi_reduce_ratio(&m_n->link_m, &m_n->link_n); } static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) { if (i915_panel_use_ssc >= 0) return i915_panel_use_ssc != 0; return dev_priv->lvds_use_ssc && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE); } /** * intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send * @crtc: CRTC structure * @mode: requested mode * * A pipe may be connected to one or more outputs. Based on the depth of the * attached framebuffer, choose a good color depth to use on the pipe. * * If possible, match the pipe depth to the fb depth. In some cases, this * isn't ideal, because the connected output supports a lesser or restricted * set of depths. Resolve that here: * LVDS typically supports only 6bpc, so clamp down in that case * HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc * Displays may support a restricted set as well, check EDID and clamp as * appropriate. * DP may want to dither down to 6bpc to fit larger modes * * RETURNS: * Dithering requirement (i.e. false if display bpc and pipe bpc match, * true if they don't match). */ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, unsigned int *pipe_bpp, struct drm_display_mode *mode) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_encoder *encoder; struct drm_connector *connector; unsigned int display_bpc = UINT_MAX, bpc; /* Walk the encoders & connectors on this crtc, get min bpc */ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { struct intel_encoder *intel_encoder = to_intel_encoder(encoder); if (encoder->crtc != crtc) continue; if (intel_encoder->type == INTEL_OUTPUT_LVDS) { unsigned int lvds_bpc; if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP) lvds_bpc = 8; else lvds_bpc = 6; if (lvds_bpc < display_bpc) { DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc); display_bpc = lvds_bpc; } continue; } if (intel_encoder->type == INTEL_OUTPUT_EDP) { /* Use VBT settings if we have an eDP panel */ unsigned int edp_bpc = dev_priv->edp.bpp / 3; if (edp_bpc < display_bpc) { DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); display_bpc = edp_bpc; } continue; } /* Not one of the known troublemakers, check the EDID */ list_for_each_entry(connector, &dev->mode_config.connector_list, head) { if (connector->encoder != encoder) continue; /* Don't use an invalid EDID bpc value */ if (connector->display_info.bpc && connector->display_info.bpc < display_bpc) { DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc); display_bpc = connector->display_info.bpc; } } /* * HDMI is either 12 or 8, so if the display lets 10bpc sneak * through, clamp it down. (Note: >12bpc will be caught below.) */ if (intel_encoder->type == INTEL_OUTPUT_HDMI) { if (display_bpc > 8 && display_bpc < 12) { DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n"); display_bpc = 12; } else { DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n"); display_bpc = 8; } } } if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) { DRM_DEBUG_KMS("Dithering DP to 6bpc\n"); display_bpc = 6; } /* * We could just drive the pipe at the highest bpc all the time and * enable dithering as needed, but that costs bandwidth. So choose * the minimum value that expresses the full color range of the fb but * also stays within the max display bpc discovered above. */ switch (crtc->fb->depth) { case 8: bpc = 8; /* since we go through a colormap */ break; case 15: case 16: bpc = 6; /* min is 18bpp */ break; case 24: bpc = 8; break; case 30: bpc = 10; break; case 48: bpc = 12; break; default: DRM_DEBUG("unsupported depth, assuming 24 bits\n"); bpc = min((unsigned int)8, display_bpc); break; } display_bpc = min(display_bpc, bpc); DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n", bpc, display_bpc); *pipe_bpp = display_bpc * 3; return display_bpc != bpc; } static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; int refclk; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && intel_panel_use_ssc(dev_priv) && num_connectors < 2) { refclk = dev_priv->lvds_ssc_freq * 1000; DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n", refclk / 1000); } else if (!IS_GEN2(dev)) { refclk = 96000; } else { refclk = 48000; } return refclk; } static void i9xx_adjust_sdvo_tv_clock(struct drm_display_mode *adjusted_mode, intel_clock_t *clock) { /* SDVO TV has fixed PLL values depend on its clock range, this mirrors vbios setting. */ if (adjusted_mode->clock >= 100000 && adjusted_mode->clock < 140500) { clock->p1 = 2; clock->p2 = 10; clock->n = 3; clock->m1 = 16; clock->m2 = 8; } else if (adjusted_mode->clock >= 140500 && adjusted_mode->clock <= 200000) { clock->p1 = 1; clock->p2 = 10; clock->n = 6; clock->m1 = 12; clock->m2 = 8; } } static void i9xx_update_pll_dividers(struct drm_crtc *crtc, intel_clock_t *clock, intel_clock_t *reduced_clock) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; u32 fp, fp2 = 0; if (IS_PINEVIEW(dev)) { fp = (1 << clock->n) << 16 | clock->m1 << 8 | clock->m2; if (reduced_clock) fp2 = (1 << reduced_clock->n) << 16 | reduced_clock->m1 << 8 | reduced_clock->m2; } else { fp = clock->n << 16 | clock->m1 << 8 | clock->m2; if (reduced_clock) fp2 = reduced_clock->n << 16 | reduced_clock->m1 << 8 | reduced_clock->m2; } I915_WRITE(FP0(pipe), fp); intel_crtc->lowfreq_avail = false; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && reduced_clock && i915_powersave) { I915_WRITE(FP1(pipe), fp2); intel_crtc->lowfreq_avail = true; } else { I915_WRITE(FP1(pipe), fp); } } static int i9xx_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, int x, int y, struct drm_framebuffer *old_fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; int refclk, num_connectors = 0; intel_clock_t clock, reduced_clock; u32 dpll, dspcntr, pipeconf, vsyncshift; bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false; bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; struct drm_mode_config *mode_config = &dev->mode_config; struct intel_encoder *encoder; const intel_limit_t *limit; int ret; u32 temp; u32 lvds_sync = 0; list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { if (encoder->base.crtc != crtc) continue; switch (encoder->type) { case INTEL_OUTPUT_LVDS: is_lvds = true; break; case INTEL_OUTPUT_SDVO: case INTEL_OUTPUT_HDMI: is_sdvo = true; if (encoder->needs_tv_clock) is_tv = true; break; case INTEL_OUTPUT_DVO: is_dvo = true; break; case INTEL_OUTPUT_TVOUT: is_tv = true; break; case INTEL_OUTPUT_ANALOG: is_crt = true; break; case INTEL_OUTPUT_DISPLAYPORT: is_dp = true; break; } num_connectors++; } refclk = i9xx_get_refclk(crtc, num_connectors); /* * Returns a set of divisors for the desired target clock with the given * refclk, or false. The returned values represent the clock equation: * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2. */ limit = intel_limit(crtc, refclk); ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL, &clock); if (!ok) { DRM_ERROR("Couldn't find PLL settings for mode!\n"); return -EINVAL; } /* Ensure that the cursor is valid for the new mode before changing... */ intel_crtc_update_cursor(crtc, true); if (is_lvds && dev_priv->lvds_downclock_avail) { /* * Ensure we match the reduced clock's P to the target clock. * If the clocks don't match, we can't switch the display clock * by using the FP0/FP1. In such case we will disable the LVDS * downclock feature. */ has_reduced_clock = limit->find_pll(limit, crtc, dev_priv->lvds_downclock, refclk, &clock, &reduced_clock); } if (is_sdvo && is_tv) i9xx_adjust_sdvo_tv_clock(adjusted_mode, &clock); i9xx_update_pll_dividers(crtc, &clock, has_reduced_clock ? &reduced_clock : NULL); dpll = DPLL_VGA_MODE_DIS; if (!IS_GEN2(dev)) { if (is_lvds) dpll |= DPLLB_MODE_LVDS; else dpll |= DPLLB_MODE_DAC_SERIAL; if (is_sdvo) { int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); if (pixel_multiplier > 1) { if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; } dpll |= DPLL_DVO_HIGH_SPEED; } if (is_dp) dpll |= DPLL_DVO_HIGH_SPEED; /* compute bitmask from p1 value */ if (IS_PINEVIEW(dev)) dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW; else { dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; if (IS_G4X(dev) && has_reduced_clock) dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; } switch (clock.p2) { case 5: dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; break; case 7: dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; break; case 10: dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; break; case 14: dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; break; } if (INTEL_INFO(dev)->gen >= 4) dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); } else { if (is_lvds) { dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; } else { if (clock.p1 == 2) dpll |= PLL_P1_DIVIDE_BY_TWO; else dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT; if (clock.p2 == 4) dpll |= PLL_P2_DIVIDE_BY_4; } } if (is_sdvo && is_tv) dpll |= PLL_REF_INPUT_TVCLKINBC; else if (is_tv) /* XXX: just matching BIOS for now */ /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ dpll |= 3; else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; else dpll |= PLL_REF_INPUT_DREFCLK; /* setup pipeconf */ pipeconf = I915_READ(PIPECONF(pipe)); /* Set up the display plane register */ dspcntr = DISPPLANE_GAMMA_ENABLE; if (pipe == 0) dspcntr &= ~DISPPLANE_SEL_PIPE_MASK; else dspcntr |= DISPPLANE_SEL_PIPE_B; if (pipe == 0 && INTEL_INFO(dev)->gen < 4) { /* Enable pixel doubling when the dot clock is > 90% of the (display) * core speed. * * XXX: No double-wide on 915GM pipe B. Is that the only reason for the * pipe == 0 check? */ if (mode->clock > dev_priv->display.get_display_clock_speed(dev) * 9 / 10) pipeconf |= PIPECONF_DOUBLE_WIDE; else pipeconf &= ~PIPECONF_DOUBLE_WIDE; } /* default to 8bpc */ pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN); if (is_dp) { if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) { pipeconf |= PIPECONF_BPP_6 | PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP; } } dpll |= DPLL_VCO_ENABLE; DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); drm_mode_debug_printmodeline(mode); I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE); POSTING_READ(DPLL(pipe)); DELAY(150); /* The LVDS pin pair needs to be on before the DPLLs are enabled. * This is an exception to the general rule that mode_set doesn't turn * things on. */ if (is_lvds) { temp = I915_READ(LVDS); temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; if (pipe == 1) { temp |= LVDS_PIPEB_SELECT; } else { temp &= ~LVDS_PIPEB_SELECT; } /* set the corresponsding LVDS_BORDER bit */ temp |= dev_priv->lvds_border_bits; /* Set the B0-B3 data pairs corresponding to whether we're going to * set the DPLLs for dual-channel mode or not. */ if (clock.p2 == 7) temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; else temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) * appropriately here, but we need to look more thoroughly into how * panels behave in the two modes. */ /* set the dithering flag on LVDS as needed */ if (INTEL_INFO(dev)->gen >= 4) { if (dev_priv->lvds_dither) temp |= LVDS_ENABLE_DITHER; else temp &= ~LVDS_ENABLE_DITHER; } if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) lvds_sync |= LVDS_HSYNC_POLARITY; if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) lvds_sync |= LVDS_VSYNC_POLARITY; if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY)) != lvds_sync) { char flags[2] = "-+"; DRM_INFO("Changing LVDS panel from " "(%chsync, %cvsync) to (%chsync, %cvsync)\n", flags[!(temp & LVDS_HSYNC_POLARITY)], flags[!(temp & LVDS_VSYNC_POLARITY)], flags[!(lvds_sync & LVDS_HSYNC_POLARITY)], flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]); temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); temp |= lvds_sync; } I915_WRITE(LVDS, temp); } if (is_dp) { intel_dp_set_m_n(crtc, mode, adjusted_mode); } I915_WRITE(DPLL(pipe), dpll); /* Wait for the clocks to stabilize. */ POSTING_READ(DPLL(pipe)); DELAY(150); if (INTEL_INFO(dev)->gen >= 4) { temp = 0; if (is_sdvo) { temp = intel_mode_get_pixel_multiplier(adjusted_mode); if (temp > 1) temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT; else temp = 0; } I915_WRITE(DPLL_MD(pipe), temp); } else { /* The pixel multiplier can only be updated once the * DPLL is enabled and the clocks are stable. * * So write it again. */ I915_WRITE(DPLL(pipe), dpll); } if (HAS_PIPE_CXSR(dev)) { if (intel_crtc->lowfreq_avail) { DRM_DEBUG_KMS("enabling CxSR downclocking\n"); pipeconf |= PIPECONF_CXSR_DOWNCLOCK; } else { DRM_DEBUG_KMS("disabling CxSR downclocking\n"); pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK; } } pipeconf &= ~PIPECONF_INTERLACE_MASK; if (!IS_GEN2(dev) && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION; /* the chip adds 2 halflines automatically */ adjusted_mode->crtc_vtotal -= 1; adjusted_mode->crtc_vblank_end -= 1; vsyncshift = adjusted_mode->crtc_hsync_start - adjusted_mode->crtc_htotal/2; } else { pipeconf |= PIPECONF_PROGRESSIVE; vsyncshift = 0; } if (!IS_GEN3(dev)) I915_WRITE(VSYNCSHIFT(pipe), vsyncshift); I915_WRITE(HTOTAL(pipe), (adjusted_mode->crtc_hdisplay - 1) | ((adjusted_mode->crtc_htotal - 1) << 16)); I915_WRITE(HBLANK(pipe), (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16)); I915_WRITE(HSYNC(pipe), (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16)); I915_WRITE(VTOTAL(pipe), (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16)); I915_WRITE(VBLANK(pipe), (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16)); I915_WRITE(VSYNC(pipe), (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16)); /* pipesrc and dspsize control the size that is scaled from, * which should always be the user's requested size. */ I915_WRITE(DSPSIZE(plane), ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1)); I915_WRITE(DSPPOS(plane), 0); I915_WRITE(PIPESRC(pipe), ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); I915_WRITE(PIPECONF(pipe), pipeconf); POSTING_READ(PIPECONF(pipe)); intel_enable_pipe(dev_priv, pipe, false); intel_wait_for_vblank(dev, pipe); I915_WRITE(DSPCNTR(plane), dspcntr); POSTING_READ(DSPCNTR(plane)); intel_enable_plane(dev_priv, plane, pipe); ret = intel_pipe_set_base(crtc, x, y, old_fb); intel_update_watermarks(dev); return ret; } /* * Initialize reference clocks when the driver loads */ void ironlake_init_pch_refclk(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_mode_config *mode_config = &dev->mode_config; struct intel_encoder *encoder; u32 temp; bool has_lvds = false; bool has_cpu_edp = false; bool has_pch_edp = false; bool has_panel = false; bool has_ck505 = false; bool can_ssc = false; /* We need to take the global config into account */ list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { switch (encoder->type) { case INTEL_OUTPUT_LVDS: has_panel = true; has_lvds = true; break; case INTEL_OUTPUT_EDP: has_panel = true; if (intel_encoder_is_pch_edp(&encoder->base)) has_pch_edp = true; else has_cpu_edp = true; break; } } if (HAS_PCH_IBX(dev)) { has_ck505 = dev_priv->display_clock_mode; can_ssc = has_ck505; } else { has_ck505 = false; can_ssc = true; } DRM_DEBUG_KMS("has_panel %d has_lvds %d has_pch_edp %d has_cpu_edp %d has_ck505 %d\n", has_panel, has_lvds, has_pch_edp, has_cpu_edp, has_ck505); /* Ironlake: try to setup display ref clock before DPLL * enabling. This is only under driver's control after * PCH B stepping, previous chipset stepping should be * ignoring this setting. */ temp = I915_READ(PCH_DREF_CONTROL); /* Always enable nonspread source */ temp &= ~DREF_NONSPREAD_SOURCE_MASK; if (has_ck505) temp |= DREF_NONSPREAD_CK505_ENABLE; else temp |= DREF_NONSPREAD_SOURCE_ENABLE; if (has_panel) { temp &= ~DREF_SSC_SOURCE_MASK; temp |= DREF_SSC_SOURCE_ENABLE; /* SSC must be turned on before enabling the CPU output */ if (intel_panel_use_ssc(dev_priv) && can_ssc) { DRM_DEBUG_KMS("Using SSC on panel\n"); temp |= DREF_SSC1_ENABLE; } else temp &= ~DREF_SSC1_ENABLE; /* Get SSC going before enabling the outputs */ I915_WRITE(PCH_DREF_CONTROL, temp); POSTING_READ(PCH_DREF_CONTROL); DELAY(200); temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK; /* Enable CPU source on CPU attached eDP */ if (has_cpu_edp) { if (intel_panel_use_ssc(dev_priv) && can_ssc) { DRM_DEBUG_KMS("Using SSC on eDP\n"); temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; } else temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; } else temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE; I915_WRITE(PCH_DREF_CONTROL, temp); POSTING_READ(PCH_DREF_CONTROL); DELAY(200); } else { DRM_DEBUG_KMS("Disabling SSC entirely\n"); temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK; /* Turn off CPU output */ temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE; I915_WRITE(PCH_DREF_CONTROL, temp); POSTING_READ(PCH_DREF_CONTROL); DELAY(200); /* Turn off the SSC source */ temp &= ~DREF_SSC_SOURCE_MASK; temp |= DREF_SSC_SOURCE_DISABLE; /* Turn off SSC1 */ temp &= ~ DREF_SSC1_ENABLE; I915_WRITE(PCH_DREF_CONTROL, temp); POSTING_READ(PCH_DREF_CONTROL); DELAY(200); } } static int ironlake_get_refclk(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_encoder *encoder; struct drm_mode_config *mode_config = &dev->mode_config; struct intel_encoder *edp_encoder = NULL; int num_connectors = 0; bool is_lvds = false; list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { if (encoder->base.crtc != crtc) continue; switch (encoder->type) { case INTEL_OUTPUT_LVDS: is_lvds = true; break; case INTEL_OUTPUT_EDP: edp_encoder = encoder; break; } num_connectors++; } if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) { DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n", dev_priv->lvds_ssc_freq); return dev_priv->lvds_ssc_freq * 1000; } return 120000; } static int ironlake_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, int x, int y, struct drm_framebuffer *old_fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; int refclk, num_connectors = 0; intel_clock_t clock, reduced_clock; u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf; bool ok, has_reduced_clock = false, is_sdvo = false; bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; struct intel_encoder *has_edp_encoder = NULL; struct drm_mode_config *mode_config = &dev->mode_config; struct intel_encoder *encoder; const intel_limit_t *limit; int ret; struct fdi_m_n m_n = {0}; u32 temp; u32 lvds_sync = 0; int target_clock, pixel_multiplier, lane, link_bw, factor; unsigned int pipe_bpp; bool dither; list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { if (encoder->base.crtc != crtc) continue; switch (encoder->type) { case INTEL_OUTPUT_LVDS: is_lvds = true; break; case INTEL_OUTPUT_SDVO: case INTEL_OUTPUT_HDMI: is_sdvo = true; if (encoder->needs_tv_clock) is_tv = true; break; case INTEL_OUTPUT_TVOUT: is_tv = true; break; case INTEL_OUTPUT_ANALOG: is_crt = true; break; case INTEL_OUTPUT_DISPLAYPORT: is_dp = true; break; case INTEL_OUTPUT_EDP: has_edp_encoder = encoder; break; } num_connectors++; } refclk = ironlake_get_refclk(crtc); /* * Returns a set of divisors for the desired target clock with the given * refclk, or false. The returned values represent the clock equation: * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2. */ limit = intel_limit(crtc, refclk); ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL, &clock); if (!ok) { DRM_ERROR("Couldn't find PLL settings for mode!\n"); return -EINVAL; } /* Ensure that the cursor is valid for the new mode before changing... */ intel_crtc_update_cursor(crtc, true); if (is_lvds && dev_priv->lvds_downclock_avail) { /* * Ensure we match the reduced clock's P to the target clock. * If the clocks don't match, we can't switch the display clock * by using the FP0/FP1. In such case we will disable the LVDS * downclock feature. */ has_reduced_clock = limit->find_pll(limit, crtc, dev_priv->lvds_downclock, refclk, &clock, &reduced_clock); } /* SDVO TV has fixed PLL values depend on its clock range, this mirrors vbios setting. */ if (is_sdvo && is_tv) { if (adjusted_mode->clock >= 100000 && adjusted_mode->clock < 140500) { clock.p1 = 2; clock.p2 = 10; clock.n = 3; clock.m1 = 16; clock.m2 = 8; } else if (adjusted_mode->clock >= 140500 && adjusted_mode->clock <= 200000) { clock.p1 = 1; clock.p2 = 10; clock.n = 6; clock.m1 = 12; clock.m2 = 8; } } /* FDI link */ pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); lane = 0; /* CPU eDP doesn't require FDI link, so just set DP M/N according to current link config */ if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) { target_clock = mode->clock; intel_edp_link_config(has_edp_encoder, &lane, &link_bw); } else { /* [e]DP over FDI requires target mode clock instead of link clock */ if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) target_clock = mode->clock; else target_clock = adjusted_mode->clock; /* FDI is a binary signal running at ~2.7GHz, encoding * each output octet as 10 bits. The actual frequency * is stored as a divider into a 100MHz clock, and the * mode pixel clock is stored in units of 1KHz. * Hence the bw of each lane in terms of the mode signal * is: */ link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10; } /* determine panel color depth */ temp = I915_READ(PIPECONF(pipe)); temp &= ~PIPE_BPC_MASK; dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, mode); switch (pipe_bpp) { case 18: temp |= PIPE_6BPC; break; case 24: temp |= PIPE_8BPC; break; case 30: temp |= PIPE_10BPC; break; case 36: temp |= PIPE_12BPC; break; default: kprintf("intel_choose_pipe_bpp returned invalid value %d\n", pipe_bpp); temp |= PIPE_8BPC; pipe_bpp = 24; break; } intel_crtc->bpp = pipe_bpp; I915_WRITE(PIPECONF(pipe), temp); if (!lane) { /* * Account for spread spectrum to avoid * oversubscribing the link. Max center spread * is 2.5%; use 5% for safety's sake. */ u32 bps = target_clock * intel_crtc->bpp * 21 / 20; lane = bps / (link_bw * 8) + 1; } intel_crtc->fdi_lanes = lane; if (pixel_multiplier > 1) link_bw *= pixel_multiplier; ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw, &m_n); fp = clock.n << 16 | clock.m1 << 8 | clock.m2; if (has_reduced_clock) fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 | reduced_clock.m2; /* Enable autotuning of the PLL clock (if permissible) */ factor = 21; if (is_lvds) { if ((intel_panel_use_ssc(dev_priv) && dev_priv->lvds_ssc_freq == 100) || (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) factor = 25; } else if (is_sdvo && is_tv) factor = 20; if (clock.m < factor * clock.n) fp |= FP_CB_TUNE; dpll = 0; if (is_lvds) dpll |= DPLLB_MODE_LVDS; else dpll |= DPLLB_MODE_DAC_SERIAL; if (is_sdvo) { int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); if (pixel_multiplier > 1) { dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT; } dpll |= DPLL_DVO_HIGH_SPEED; } if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) dpll |= DPLL_DVO_HIGH_SPEED; /* compute bitmask from p1 value */ dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; /* also FPA1 */ dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; switch (clock.p2) { case 5: dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; break; case 7: dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; break; case 10: dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; break; case 14: dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; break; } if (is_sdvo && is_tv) dpll |= PLL_REF_INPUT_TVCLKINBC; else if (is_tv) /* XXX: just matching BIOS for now */ /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ dpll |= 3; else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; else dpll |= PLL_REF_INPUT_DREFCLK; /* setup pipeconf */ pipeconf = I915_READ(PIPECONF(pipe)); /* Set up the display plane register */ dspcntr = DISPPLANE_GAMMA_ENABLE; DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe); drm_mode_debug_printmodeline(mode); /* PCH eDP needs FDI, but CPU eDP does not */ if (!intel_crtc->no_pll) { if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { I915_WRITE(_PCH_FP0(pipe), fp); I915_WRITE(_PCH_DPLL(pipe), dpll & ~DPLL_VCO_ENABLE); POSTING_READ(_PCH_DPLL(pipe)); DELAY(150); } } else { if (dpll == (I915_READ(_PCH_DPLL(0)) & 0x7fffffff) && fp == I915_READ(_PCH_FP0(0))) { intel_crtc->use_pll_a = true; DRM_DEBUG_KMS("using pipe a dpll\n"); } else if (dpll == (I915_READ(_PCH_DPLL(1)) & 0x7fffffff) && fp == I915_READ(_PCH_FP0(1))) { intel_crtc->use_pll_a = false; DRM_DEBUG_KMS("using pipe b dpll\n"); } else { DRM_DEBUG_KMS("no matching PLL configuration for pipe 2\n"); return -EINVAL; } } /* The LVDS pin pair needs to be on before the DPLLs are enabled. * This is an exception to the general rule that mode_set doesn't turn * things on. */ if (is_lvds) { temp = I915_READ(PCH_LVDS); temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; if (HAS_PCH_CPT(dev)) { temp &= ~PORT_TRANS_SEL_MASK; temp |= PORT_TRANS_SEL_CPT(pipe); } else { if (pipe == 1) temp |= LVDS_PIPEB_SELECT; else temp &= ~LVDS_PIPEB_SELECT; } /* set the corresponsding LVDS_BORDER bit */ temp |= dev_priv->lvds_border_bits; /* Set the B0-B3 data pairs corresponding to whether we're going to * set the DPLLs for dual-channel mode or not. */ if (clock.p2 == 7) temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; else temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) * appropriately here, but we need to look more thoroughly into how * panels behave in the two modes. */ if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) lvds_sync |= LVDS_HSYNC_POLARITY; if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) lvds_sync |= LVDS_VSYNC_POLARITY; if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY)) != lvds_sync) { char flags[2] = "-+"; DRM_INFO("Changing LVDS panel from " "(%chsync, %cvsync) to (%chsync, %cvsync)\n", flags[!(temp & LVDS_HSYNC_POLARITY)], flags[!(temp & LVDS_VSYNC_POLARITY)], flags[!(lvds_sync & LVDS_HSYNC_POLARITY)], flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]); temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); temp |= lvds_sync; } I915_WRITE(PCH_LVDS, temp); } pipeconf &= ~PIPECONF_DITHER_EN; pipeconf &= ~PIPECONF_DITHER_TYPE_MASK; if ((is_lvds && dev_priv->lvds_dither) || dither) { pipeconf |= PIPECONF_DITHER_EN; pipeconf |= PIPECONF_DITHER_TYPE_SP; } if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { intel_dp_set_m_n(crtc, mode, adjusted_mode); } else { /* For non-DP output, clear any trans DP clock recovery setting.*/ I915_WRITE(TRANSDATA_M1(pipe), 0); I915_WRITE(TRANSDATA_N1(pipe), 0); I915_WRITE(TRANSDPLINK_M1(pipe), 0); I915_WRITE(TRANSDPLINK_N1(pipe), 0); } if (!intel_crtc->no_pll && (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base))) { I915_WRITE(_PCH_DPLL(pipe), dpll); /* Wait for the clocks to stabilize. */ POSTING_READ(_PCH_DPLL(pipe)); DELAY(150); /* The pixel multiplier can only be updated once the * DPLL is enabled and the clocks are stable. * * So write it again. */ I915_WRITE(_PCH_DPLL(pipe), dpll); } intel_crtc->lowfreq_avail = false; if (!intel_crtc->no_pll) { if (is_lvds && has_reduced_clock && i915_powersave) { I915_WRITE(_PCH_FP1(pipe), fp2); intel_crtc->lowfreq_avail = true; if (HAS_PIPE_CXSR(dev)) { DRM_DEBUG_KMS("enabling CxSR downclocking\n"); pipeconf |= PIPECONF_CXSR_DOWNCLOCK; } } else { I915_WRITE(_PCH_FP1(pipe), fp); if (HAS_PIPE_CXSR(dev)) { DRM_DEBUG_KMS("disabling CxSR downclocking\n"); pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK; } } } pipeconf &= ~PIPECONF_INTERLACE_MASK; if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { pipeconf |= PIPECONF_INTERLACED_ILK; /* the chip adds 2 halflines automatically */ adjusted_mode->crtc_vtotal -= 1; adjusted_mode->crtc_vblank_end -= 1; I915_WRITE(VSYNCSHIFT(pipe), adjusted_mode->crtc_hsync_start - adjusted_mode->crtc_htotal/2); } else { pipeconf |= PIPECONF_PROGRESSIVE; I915_WRITE(VSYNCSHIFT(pipe), 0); } I915_WRITE(HTOTAL(pipe), (adjusted_mode->crtc_hdisplay - 1) | ((adjusted_mode->crtc_htotal - 1) << 16)); I915_WRITE(HBLANK(pipe), (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16)); I915_WRITE(HSYNC(pipe), (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16)); I915_WRITE(VTOTAL(pipe), (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16)); I915_WRITE(VBLANK(pipe), (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16)); I915_WRITE(VSYNC(pipe), (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16)); /* pipesrc controls the size that is scaled from, which should * always be the user's requested size. */ I915_WRITE(PIPESRC(pipe), ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m); I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n); I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m); I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n); if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) { ironlake_set_pll_edp(crtc, adjusted_mode->clock); } I915_WRITE(PIPECONF(pipe), pipeconf); POSTING_READ(PIPECONF(pipe)); intel_wait_for_vblank(dev, pipe); I915_WRITE(DSPCNTR(plane), dspcntr); POSTING_READ(DSPCNTR(plane)); ret = intel_pipe_set_base(crtc, x, y, old_fb); intel_update_watermarks(dev); return ret; } static int intel_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, int x, int y, struct drm_framebuffer *old_fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int ret; drm_vblank_pre_modeset(dev, pipe); ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode, x, y, old_fb); drm_vblank_post_modeset(dev, pipe); if (ret) intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF; else intel_crtc->dpms_mode = DRM_MODE_DPMS_ON; return ret; } static bool intel_eld_uptodate(struct drm_connector *connector, int reg_eldv, uint32_t bits_eldv, int reg_elda, uint32_t bits_elda, int reg_edid) { struct drm_i915_private *dev_priv = connector->dev->dev_private; uint8_t *eld = connector->eld; uint32_t i; i = I915_READ(reg_eldv); i &= bits_eldv; if (!eld[0]) return !i; if (!i) return false; i = I915_READ(reg_elda); i &= ~bits_elda; I915_WRITE(reg_elda, i); for (i = 0; i < eld[2]; i++) if (I915_READ(reg_edid) != *((uint32_t *)eld + i)) return false; return true; } static void g4x_write_eld(struct drm_connector *connector, struct drm_crtc *crtc) { struct drm_i915_private *dev_priv = connector->dev->dev_private; uint8_t *eld = connector->eld; uint32_t eldv; uint32_t len; uint32_t i; i = I915_READ(G4X_AUD_VID_DID); if (i == INTEL_AUDIO_DEVBLC || i == INTEL_AUDIO_DEVCL) eldv = G4X_ELDV_DEVCL_DEVBLC; else eldv = G4X_ELDV_DEVCTG; if (intel_eld_uptodate(connector, G4X_AUD_CNTL_ST, eldv, G4X_AUD_CNTL_ST, G4X_ELD_ADDR, G4X_HDMIW_HDMIEDID)) return; i = I915_READ(G4X_AUD_CNTL_ST); i &= ~(eldv | G4X_ELD_ADDR); len = (i >> 9) & 0x1f; /* ELD buffer size */ I915_WRITE(G4X_AUD_CNTL_ST, i); if (!eld[0]) return; if (eld[2] < (uint8_t)len) len = eld[2]; DRM_DEBUG_KMS("ELD size %d\n", len); for (i = 0; i < len; i++) I915_WRITE(G4X_HDMIW_HDMIEDID, *((uint32_t *)eld + i)); i = I915_READ(G4X_AUD_CNTL_ST); i |= eldv; I915_WRITE(G4X_AUD_CNTL_ST, i); } static void ironlake_write_eld(struct drm_connector *connector, struct drm_crtc *crtc) { struct drm_i915_private *dev_priv = connector->dev->dev_private; uint8_t *eld = connector->eld; uint32_t eldv; uint32_t i; int len; int hdmiw_hdmiedid; int aud_config; int aud_cntl_st; int aud_cntrl_st2; if (HAS_PCH_IBX(connector->dev)) { hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID_A; aud_config = IBX_AUD_CONFIG_A; aud_cntl_st = IBX_AUD_CNTL_ST_A; aud_cntrl_st2 = IBX_AUD_CNTL_ST2; } else { hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID_A; aud_config = CPT_AUD_CONFIG_A; aud_cntl_st = CPT_AUD_CNTL_ST_A; aud_cntrl_st2 = CPT_AUD_CNTRL_ST2; } i = to_intel_crtc(crtc)->pipe; hdmiw_hdmiedid += i * 0x100; aud_cntl_st += i * 0x100; aud_config += i * 0x100; DRM_DEBUG_KMS("ELD on pipe %c\n", pipe_name(i)); i = I915_READ(aud_cntl_st); i = (i >> 29) & 0x3; /* DIP_Port_Select, 0x1 = PortB */ if (!i) { DRM_DEBUG_KMS("Audio directed to unknown port\n"); /* operate blindly on all ports */ eldv = IBX_ELD_VALIDB; eldv |= IBX_ELD_VALIDB << 4; eldv |= IBX_ELD_VALIDB << 8; } else { DRM_DEBUG_KMS("ELD on port %c\n", 'A' + i); eldv = IBX_ELD_VALIDB << ((i - 1) * 4); } if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n"); eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */ I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */ } else I915_WRITE(aud_config, 0); if (intel_eld_uptodate(connector, aud_cntrl_st2, eldv, aud_cntl_st, IBX_ELD_ADDRESS, hdmiw_hdmiedid)) return; i = I915_READ(aud_cntrl_st2); i &= ~eldv; I915_WRITE(aud_cntrl_st2, i); if (!eld[0]) return; i = I915_READ(aud_cntl_st); i &= ~IBX_ELD_ADDRESS; I915_WRITE(aud_cntl_st, i); /* 84 bytes of hw ELD buffer */ len = 21; if (eld[2] < (uint8_t)len) len = eld[2]; DRM_DEBUG_KMS("ELD size %d\n", len); for (i = 0; i < len; i++) I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i)); i = I915_READ(aud_cntrl_st2); i |= eldv; I915_WRITE(aud_cntrl_st2, i); } void intel_write_eld(struct drm_encoder *encoder, struct drm_display_mode *mode) { struct drm_crtc *crtc = encoder->crtc; struct drm_connector *connector; struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; connector = drm_select_eld(encoder, mode); if (!connector) return; DRM_DEBUG_KMS("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", connector->base.id, drm_get_connector_name(connector), connector->encoder->base.id, drm_get_encoder_name(connector->encoder)); connector->eld[6] = drm_av_sync_delay(connector, mode) / 2; if (dev_priv->display.write_eld) dev_priv->display.write_eld(connector, crtc); } /** Loads the palette/gamma unit for the CRTC with the prepared values */ void intel_crtc_load_lut(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int palreg = PALETTE(intel_crtc->pipe); int i; /* The clocks have to be on to load the palette. */ if (!crtc->enabled || !intel_crtc->active) return; /* use legacy palette for Ironlake */ if (HAS_PCH_SPLIT(dev)) palreg = LGC_PALETTE(intel_crtc->pipe); for (i = 0; i < 256; i++) { I915_WRITE(palreg + 4 * i, (intel_crtc->lut_r[i] << 16) | (intel_crtc->lut_g[i] << 8) | intel_crtc->lut_b[i]); } } static void i845_update_cursor(struct drm_crtc *crtc, u32 base) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); bool visible = base != 0; u32 cntl; if (intel_crtc->cursor_visible == visible) return; cntl = I915_READ(_CURACNTR); if (visible) { /* On these chipsets we can only modify the base whilst * the cursor is disabled. */ I915_WRITE(_CURABASE, base); cntl &= ~(CURSOR_FORMAT_MASK); /* XXX width must be 64, stride 256 => 0x00 << 28 */ cntl |= CURSOR_ENABLE | CURSOR_GAMMA_ENABLE | CURSOR_FORMAT_ARGB; } else cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE); I915_WRITE(_CURACNTR, cntl); intel_crtc->cursor_visible = visible; } static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; bool visible = base != 0; if (intel_crtc->cursor_visible != visible) { uint32_t cntl = I915_READ(CURCNTR(pipe)); if (base) { cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT); cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; cntl |= pipe << 28; /* Connect to correct pipe */ } else { cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE); cntl |= CURSOR_MODE_DISABLE; } I915_WRITE(CURCNTR(pipe), cntl); intel_crtc->cursor_visible = visible; } /* and commit changes on next vblank */ I915_WRITE(CURBASE(pipe), base); } static void ivb_update_cursor(struct drm_crtc *crtc, u32 base) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; bool visible = base != 0; if (intel_crtc->cursor_visible != visible) { uint32_t cntl = I915_READ(CURCNTR_IVB(pipe)); if (base) { cntl &= ~CURSOR_MODE; cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; } else { cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE); cntl |= CURSOR_MODE_DISABLE; } I915_WRITE(CURCNTR_IVB(pipe), cntl); intel_crtc->cursor_visible = visible; } /* and commit changes on next vblank */ I915_WRITE(CURBASE_IVB(pipe), base); } /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */ static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int x = intel_crtc->cursor_x; int y = intel_crtc->cursor_y; u32 base, pos; bool visible; pos = 0; if (on && crtc->enabled && crtc->fb) { base = intel_crtc->cursor_addr; if (x > (int) crtc->fb->width) base = 0; if (y > (int) crtc->fb->height) base = 0; } else base = 0; if (x < 0) { if (x + intel_crtc->cursor_width < 0) base = 0; pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT; x = -x; } pos |= x << CURSOR_X_SHIFT; if (y < 0) { if (y + intel_crtc->cursor_height < 0) base = 0; pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT; y = -y; } pos |= y << CURSOR_Y_SHIFT; visible = base != 0; if (!visible && !intel_crtc->cursor_visible) return; if (IS_IVYBRIDGE(dev)) { I915_WRITE(CURPOS_IVB(pipe), pos); ivb_update_cursor(crtc, base); } else { I915_WRITE(CURPOS(pipe), pos); if (IS_845G(dev) || IS_I865G(dev)) i845_update_cursor(crtc, base); else i9xx_update_cursor(crtc, base); } } static int intel_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file, uint32_t handle, uint32_t width, uint32_t height) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct drm_i915_gem_object *obj; uint32_t addr; int ret; DRM_DEBUG_KMS("\n"); /* if we want to turn off the cursor ignore width and height */ if (!handle) { DRM_DEBUG_KMS("cursor off\n"); addr = 0; obj = NULL; DRM_LOCK(dev); goto finish; } /* Currently we only support 64x64 cursors */ if (width != 64 || height != 64) { DRM_ERROR("we currently only support 64x64 cursors\n"); return -EINVAL; } obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle)); if (&obj->base == NULL) return -ENOENT; if (obj->base.size < width * height * 4) { DRM_ERROR("buffer is to small\n"); ret = -ENOMEM; goto fail; } /* we only need to pin inside GTT if cursor is non-phy */ DRM_LOCK(dev); if (!dev_priv->info->cursor_needs_physical) { if (obj->tiling_mode) { DRM_ERROR("cursor cannot be tiled\n"); ret = -EINVAL; goto fail_locked; } ret = i915_gem_object_pin_to_display_plane(obj, 0, NULL); if (ret) { DRM_ERROR("failed to move cursor bo into the GTT\n"); goto fail_locked; } ret = i915_gem_object_put_fence(obj); if (ret) { DRM_ERROR("failed to release fence for cursor\n"); goto fail_unpin; } addr = obj->gtt_offset; } else { int align = IS_I830(dev) ? 16 * 1024 : 256; ret = i915_gem_attach_phys_object(dev, obj, (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1, align); if (ret) { DRM_ERROR("failed to attach phys object\n"); goto fail_locked; } addr = obj->phys_obj->handle->busaddr; } if (IS_GEN2(dev)) I915_WRITE(CURSIZE, (height << 12) | width); finish: if (intel_crtc->cursor_bo) { if (dev_priv->info->cursor_needs_physical) { if (intel_crtc->cursor_bo != obj) i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo); } else i915_gem_object_unpin(intel_crtc->cursor_bo); drm_gem_object_unreference(&intel_crtc->cursor_bo->base); } DRM_UNLOCK(dev); intel_crtc->cursor_addr = addr; intel_crtc->cursor_bo = obj; intel_crtc->cursor_width = width; intel_crtc->cursor_height = height; intel_crtc_update_cursor(crtc, true); return 0; fail_unpin: i915_gem_object_unpin(obj); fail_locked: DRM_UNLOCK(dev); fail: drm_gem_object_unreference_unlocked(&obj->base); return ret; } static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); intel_crtc->cursor_x = x; intel_crtc->cursor_y = y; intel_crtc_update_cursor(crtc, true); return 0; } /** Sets the color ramps on behalf of RandR */ void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green, u16 blue, int regno) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); intel_crtc->lut_r[regno] = red >> 8; intel_crtc->lut_g[regno] = green >> 8; intel_crtc->lut_b[regno] = blue >> 8; } void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue, int regno) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); *red = intel_crtc->lut_r[regno] << 8; *green = intel_crtc->lut_g[regno] << 8; *blue = intel_crtc->lut_b[regno] << 8; } static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue, uint32_t start, uint32_t size) { int end = (start + size > 256) ? 256 : start + size, i; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); for (i = start; i < end; i++) { intel_crtc->lut_r[i] = red[i] >> 8; intel_crtc->lut_g[i] = green[i] >> 8; intel_crtc->lut_b[i] = blue[i] >> 8; } intel_crtc_load_lut(crtc); } /** * Get a pipe with a simple mode set on it for doing load-based monitor * detection. * * It will be up to the load-detect code to adjust the pipe as appropriate for * its requirements. The pipe will be connected to no other encoders. * * Currently this code will only succeed if there is a pipe with no encoders * configured for it. In the future, it could choose to temporarily disable * some outputs to free up a pipe for its use. * * \return crtc, or NULL if no pipes are available. */ /* VESA 640x480x72Hz mode to set on the pipe */ static struct drm_display_mode load_detect_mode = { DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664, 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), }; static struct drm_framebuffer * intel_framebuffer_create(struct drm_device *dev, struct drm_mode_fb_cmd2 *mode_cmd, struct drm_i915_gem_object *obj) { struct intel_framebuffer *intel_fb; int ret; intel_fb = kmalloc(sizeof(*intel_fb), DRM_MEM_KMS, M_WAITOK | M_ZERO); if (!intel_fb) { drm_gem_object_unreference_unlocked(&obj->base); return ERR_PTR(-ENOMEM); } ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj); if (ret) { drm_gem_object_unreference_unlocked(&obj->base); kfree(intel_fb, DRM_MEM_KMS); return ERR_PTR(ret); } return &intel_fb->base; } static u32 intel_framebuffer_pitch_for_width(int width, int bpp) { u32 pitch = howmany(width * bpp, 8); return roundup2(pitch, 64); } static u32 intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp) { u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp); return roundup2(pitch * mode->vdisplay, PAGE_SIZE); } static struct drm_framebuffer * intel_framebuffer_create_for_mode(struct drm_device *dev, struct drm_display_mode *mode, int depth, int bpp) { struct drm_i915_gem_object *obj; struct drm_mode_fb_cmd2 mode_cmd = { 0 }; obj = i915_gem_alloc_object(dev, intel_framebuffer_size_for_mode(mode, bpp)); if (obj == NULL) return ERR_PTR(-ENOMEM); mode_cmd.width = mode->hdisplay; mode_cmd.height = mode->vdisplay; mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width, bpp); mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth); return intel_framebuffer_create(dev, &mode_cmd, obj); } static int mode_fits_in_fbdev(struct drm_device *dev, struct drm_display_mode *mode, struct drm_framebuffer **res) { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj; struct drm_framebuffer *fb; if (dev_priv->fbdev == NULL) { *res = NULL; return (0); } obj = dev_priv->fbdev->ifb.obj; if (obj == NULL) { *res = NULL; return (0); } fb = &dev_priv->fbdev->ifb.base; if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay, fb->bits_per_pixel)) { *res = NULL; return (0); } if (obj->base.size < mode->vdisplay * fb->pitches[0]) { *res = NULL; return (0); } *res = fb; return (0); } bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder, struct drm_connector *connector, struct drm_display_mode *mode, struct intel_load_detect_pipe *old) { struct intel_crtc *intel_crtc; struct drm_crtc *possible_crtc; struct drm_encoder *encoder = &intel_encoder->base; struct drm_crtc *crtc = NULL; struct drm_device *dev = encoder->dev; struct drm_framebuffer *old_fb; int i = -1, r; DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", connector->base.id, drm_get_connector_name(connector), encoder->base.id, drm_get_encoder_name(encoder)); /* * Algorithm gets a little messy: * * - if the connector already has an assigned crtc, use it (but make * sure it's on first) * * - try to find the first unused crtc that can drive this connector, * and use that if we find one */ /* See if we already have a CRTC for this connector */ if (encoder->crtc) { crtc = encoder->crtc; intel_crtc = to_intel_crtc(crtc); old->dpms_mode = intel_crtc->dpms_mode; old->load_detect_temp = false; /* Make sure the crtc and connector are running */ if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) { struct drm_encoder_helper_funcs *encoder_funcs; struct drm_crtc_helper_funcs *crtc_funcs; crtc_funcs = crtc->helper_private; crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); encoder_funcs = encoder->helper_private; encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); } return true; } /* Find an unused one (if possible) */ list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) { i++; if (!(encoder->possible_crtcs & (1 << i))) continue; if (!possible_crtc->enabled) { crtc = possible_crtc; break; } } /* * If we didn't find an unused CRTC, don't use any. */ if (!crtc) { DRM_DEBUG_KMS("no pipe available for load-detect\n"); return false; } encoder->crtc = crtc; connector->encoder = encoder; intel_crtc = to_intel_crtc(crtc); old->dpms_mode = intel_crtc->dpms_mode; old->load_detect_temp = true; old->release_fb = NULL; if (!mode) mode = &load_detect_mode; old_fb = crtc->fb; /* We need a framebuffer large enough to accommodate all accesses * that the plane may generate whilst we perform load detection. * We can not rely on the fbcon either being present (we get called * during its initialisation to detect all boot displays, or it may * not even exist) or that it is large enough to satisfy the * requested mode. */ r = mode_fits_in_fbdev(dev, mode, &crtc->fb); if (crtc->fb == NULL) { DRM_DEBUG_KMS("creating tmp fb for load-detection\n"); crtc->fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32); old->release_fb = crtc->fb; } else DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n"); if (IS_ERR(crtc->fb)) { DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n"); return false; } if (!drm_crtc_helper_set_mode(crtc, mode, 0, 0, old_fb)) { DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n"); if (old->release_fb) old->release_fb->funcs->destroy(old->release_fb); crtc->fb = old_fb; return false; } /* let the connector get through one full cycle before testing */ intel_wait_for_vblank(dev, intel_crtc->pipe); return true; } void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder, struct drm_connector *connector, struct intel_load_detect_pipe *old) { struct drm_encoder *encoder = &intel_encoder->base; struct drm_device *dev = encoder->dev; struct drm_crtc *crtc = encoder->crtc; struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", connector->base.id, drm_get_connector_name(connector), encoder->base.id, drm_get_encoder_name(encoder)); if (old->load_detect_temp) { connector->encoder = NULL; drm_helper_disable_unused_functions(dev); if (old->release_fb) old->release_fb->funcs->destroy(old->release_fb); return; } /* Switch crtc and encoder back off if necessary */ if (old->dpms_mode != DRM_MODE_DPMS_ON) { encoder_funcs->dpms(encoder, old->dpms_mode); crtc_funcs->dpms(crtc, old->dpms_mode); } } /* Returns the clock of the currently programmed mode of the given pipe. */ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; u32 dpll = I915_READ(DPLL(pipe)); u32 fp; intel_clock_t clock; if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) fp = I915_READ(FP0(pipe)); else fp = I915_READ(FP1(pipe)); clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT; if (IS_PINEVIEW(dev)) { clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1; clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT; } else { clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT; clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT; } if (!IS_GEN2(dev)) { if (IS_PINEVIEW(dev)) clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >> DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW); else clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >> DPLL_FPA01_P1_POST_DIV_SHIFT); switch (dpll & DPLL_MODE_MASK) { case DPLLB_MODE_DAC_SERIAL: clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ? 5 : 10; break; case DPLLB_MODE_LVDS: clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ? 7 : 14; break; default: DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed " "mode\n", (int)(dpll & DPLL_MODE_MASK)); return 0; } /* XXX: Handle the 100Mhz refclk */ intel_clock(dev, 96000, &clock); } else { bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN); if (is_lvds) { clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >> DPLL_FPA01_P1_POST_DIV_SHIFT); clock.p2 = 14; if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN) { /* XXX: might not be 66MHz */ intel_clock(dev, 66000, &clock); } else intel_clock(dev, 48000, &clock); } else { if (dpll & PLL_P1_DIVIDE_BY_TWO) clock.p1 = 2; else { clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >> DPLL_FPA01_P1_POST_DIV_SHIFT) + 2; } if (dpll & PLL_P2_DIVIDE_BY_4) clock.p2 = 4; else clock.p2 = 2; intel_clock(dev, 48000, &clock); } } /* XXX: It would be nice to validate the clocks, but we can't reuse * i830PllIsValid() because it relies on the xf86_config connector * configuration being accurate, which it isn't necessarily. */ return clock.dot; } /** Returns the currently programmed mode of the given pipe. */ struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev, struct drm_crtc *crtc) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; struct drm_display_mode *mode; int htot = I915_READ(HTOTAL(pipe)); int hsync = I915_READ(HSYNC(pipe)); int vtot = I915_READ(VTOTAL(pipe)); int vsync = I915_READ(VSYNC(pipe)); mode = kmalloc(sizeof(*mode), DRM_MEM_KMS, M_WAITOK | M_ZERO); mode->clock = intel_crtc_clock_get(dev, crtc); mode->hdisplay = (htot & 0xffff) + 1; mode->htotal = ((htot & 0xffff0000) >> 16) + 1; mode->hsync_start = (hsync & 0xffff) + 1; mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1; mode->vdisplay = (vtot & 0xffff) + 1; mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1; mode->vsync_start = (vsync & 0xffff) + 1; mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1; drm_mode_set_name(mode); drm_mode_set_crtcinfo(mode, 0); return mode; } static void intel_increase_pllclock(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int dpll_reg = DPLL(pipe); int dpll; if (HAS_PCH_SPLIT(dev)) return; if (!dev_priv->lvds_downclock_avail) return; dpll = I915_READ(dpll_reg); if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) { DRM_DEBUG_DRIVER("upclocking LVDS\n"); assert_panel_unlocked(dev_priv, pipe); dpll &= ~DISPLAY_RATE_SELECT_FPA1; I915_WRITE(dpll_reg, dpll); intel_wait_for_vblank(dev, pipe); dpll = I915_READ(dpll_reg); if (dpll & DISPLAY_RATE_SELECT_FPA1) DRM_DEBUG_DRIVER("failed to upclock LVDS!\n"); } } static void intel_decrease_pllclock(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); if (HAS_PCH_SPLIT(dev)) return; if (!dev_priv->lvds_downclock_avail) return; /* * Since this is called by a timer, we should never get here in * the manual case. */ if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) { int pipe = intel_crtc->pipe; int dpll_reg = DPLL(pipe); u32 dpll; DRM_DEBUG_DRIVER("downclocking LVDS\n"); assert_panel_unlocked(dev_priv, pipe); dpll = I915_READ(dpll_reg); dpll |= DISPLAY_RATE_SELECT_FPA1; I915_WRITE(dpll_reg, dpll); intel_wait_for_vblank(dev, pipe); dpll = I915_READ(dpll_reg); if (!(dpll & DISPLAY_RATE_SELECT_FPA1)) DRM_DEBUG_DRIVER("failed to downclock LVDS!\n"); } } void intel_mark_busy(struct drm_device *dev) { i915_update_gfx_val(dev->dev_private); } void intel_mark_idle(struct drm_device *dev) { struct drm_crtc *crtc; if (!i915_powersave) return; list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { if (!crtc->fb) continue; intel_decrease_pllclock(crtc); } } static void intel_crtc_destroy(struct drm_crtc *crtc) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct drm_device *dev = crtc->dev; struct intel_unpin_work *work; lockmgr(&dev->event_lock, LK_EXCLUSIVE); work = intel_crtc->unpin_work; intel_crtc->unpin_work = NULL; lockmgr(&dev->event_lock, LK_RELEASE); if (work) { cancel_work_sync(&work->work); kfree(work, DRM_MEM_KMS); } drm_crtc_cleanup(crtc); drm_free(intel_crtc, DRM_MEM_KMS); } static void intel_unpin_work_fn(struct work_struct *__work) { struct intel_unpin_work *work = container_of(__work, struct intel_unpin_work, work); struct drm_device *dev; dev = work->dev; DRM_LOCK(dev); intel_unpin_fb_obj(work->old_fb_obj); drm_gem_object_unreference(&work->pending_flip_obj->base); drm_gem_object_unreference(&work->old_fb_obj->base); intel_update_fbc(work->dev); DRM_UNLOCK(dev); drm_free(work, DRM_MEM_KMS); } static void do_intel_finish_page_flip(struct drm_device *dev, struct drm_crtc *crtc) { drm_i915_private_t *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_unpin_work *work; struct drm_i915_gem_object *obj; /* Ignore early vblank irqs */ if (intel_crtc == NULL) return; lockmgr(&dev->event_lock, LK_EXCLUSIVE); work = intel_crtc->unpin_work; if (work == NULL || !atomic_read(&work->pending)) { lockmgr(&dev->event_lock, LK_RELEASE); return; } intel_crtc->unpin_work = NULL; if (work->event) drm_send_vblank_event(dev, intel_crtc->pipe, work->event); drm_vblank_put(dev, intel_crtc->pipe); lockmgr(&dev->event_lock, LK_RELEASE); obj = work->old_fb_obj; atomic_clear_mask(1 << intel_crtc->plane, &obj->pending_flip.counter); wakeup(&obj->pending_flip); queue_work(dev_priv->wq, &work->work); } void intel_finish_page_flip(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe]; do_intel_finish_page_flip(dev, crtc); } void intel_finish_page_flip_plane(struct drm_device *dev, int plane) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane]; do_intel_finish_page_flip(dev, crtc); } void intel_prepare_page_flip(struct drm_device *dev, int plane) { drm_i915_private_t *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]); lockmgr(&dev->event_lock, LK_EXCLUSIVE); if (intel_crtc->unpin_work) atomic_inc_not_zero(&intel_crtc->unpin_work->pending); lockmgr(&dev->event_lock, LK_RELEASE); } static int intel_gen2_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); unsigned long offset; u32 flip_mask; int ret; ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); if (ret) goto out; /* Offset into the new buffer for cases of shared fbs between CRTCs */ offset = crtc->y * fb->pitches[0] + crtc->x * fb->bits_per_pixel/8; ret = BEGIN_LP_RING(6); if (ret) goto out; /* Can't queue multiple flips, so wait for the previous * one to finish before executing the next. */ if (intel_crtc->plane) flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; else flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; OUT_RING(MI_WAIT_FOR_EVENT | flip_mask); OUT_RING(MI_NOOP); OUT_RING(MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); OUT_RING(fb->pitches[0]); OUT_RING(obj->gtt_offset + offset); OUT_RING(0); /* aux display base address, unused */ ADVANCE_LP_RING(); out: return ret; } static int intel_gen3_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); unsigned long offset; u32 flip_mask; int ret; ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); if (ret) goto out; /* Offset into the new buffer for cases of shared fbs between CRTCs */ offset = crtc->y * fb->pitches[0] + crtc->x * fb->bits_per_pixel/8; ret = BEGIN_LP_RING(6); if (ret) goto out; if (intel_crtc->plane) flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; else flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; OUT_RING(MI_WAIT_FOR_EVENT | flip_mask); OUT_RING(MI_NOOP); OUT_RING(MI_DISPLAY_FLIP_I915 | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); OUT_RING(fb->pitches[0]); OUT_RING(obj->gtt_offset + offset); OUT_RING(MI_NOOP); ADVANCE_LP_RING(); out: return ret; } static int intel_gen4_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); uint32_t pf, pipesrc; int ret; ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); if (ret) goto out; ret = BEGIN_LP_RING(4); if (ret) goto out; /* i965+ uses the linear or tiled offsets from the * Display Registers (which do not change across a page-flip) * so we need only reprogram the base address. */ OUT_RING(MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); OUT_RING(fb->pitches[0]); OUT_RING(obj->gtt_offset | obj->tiling_mode); /* XXX Enabling the panel-fitter across page-flip is so far * untested on non-native modes, so ignore it for now. * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE; */ pf = 0; pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff; OUT_RING(pf | pipesrc); ADVANCE_LP_RING(); out: return ret; } static int intel_gen6_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); uint32_t pf, pipesrc; int ret; ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); if (ret) goto out; ret = BEGIN_LP_RING(4); if (ret) goto out; OUT_RING(MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); OUT_RING(fb->pitches[0] | obj->tiling_mode); OUT_RING(obj->gtt_offset); /* Contrary to the suggestions in the documentation, * "Enable Panel Fitter" does not seem to be required when page * flipping with a non-native mode, and worse causes a normal * modeset to fail. * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE; */ pf = 0; pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff; OUT_RING(pf | pipesrc); ADVANCE_LP_RING(); out: return ret; } /* * On gen7 we currently use the blit ring because (in early silicon at least) * the render ring doesn't give us interrpts for page flip completion, which * means clients will hang after the first flip is queued. Fortunately the * blit ring generates interrupts properly, so use it instead. */ static int intel_gen7_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_ring_buffer *ring = &dev_priv->ring[BCS]; int ret; ret = intel_pin_and_fence_fb_obj(dev, obj, ring); if (ret) goto out; ret = intel_ring_begin(ring, 4); if (ret) goto out; intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | (intel_crtc->plane << 19)); intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode)); intel_ring_emit(ring, (obj->gtt_offset)); intel_ring_emit(ring, (MI_NOOP)); intel_ring_advance(ring); out: return ret; } static int intel_default_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj) { return -ENODEV; } static int intel_crtc_page_flip(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_pending_vblank_event *event) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_framebuffer *intel_fb; struct drm_i915_gem_object *obj; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_unpin_work *work; int ret; work = kmalloc(sizeof *work, DRM_MEM_KMS, M_WAITOK | M_ZERO); work->event = event; work->dev = crtc->dev; intel_fb = to_intel_framebuffer(crtc->fb); work->old_fb_obj = intel_fb->obj; INIT_WORK(&work->work, intel_unpin_work_fn); ret = drm_vblank_get(dev, intel_crtc->pipe); if (ret) goto free_work; /* We borrow the event spin lock for protecting unpin_work */ lockmgr(&dev->event_lock, LK_EXCLUSIVE); if (intel_crtc->unpin_work) { lockmgr(&dev->event_lock, LK_RELEASE); drm_free(work, DRM_MEM_KMS); drm_vblank_put(dev, intel_crtc->pipe); DRM_DEBUG("flip queue: crtc already busy\n"); return -EBUSY; } intel_crtc->unpin_work = work; lockmgr(&dev->event_lock, LK_RELEASE); intel_fb = to_intel_framebuffer(fb); obj = intel_fb->obj; DRM_LOCK(dev); /* Reference the objects for the scheduled work. */ drm_gem_object_reference(&work->old_fb_obj->base); drm_gem_object_reference(&obj->base); crtc->fb = fb; work->pending_flip_obj = obj; work->enable_stall_check = true; /* Block clients from rendering to the new back buffer until * the flip occurs and the object is no longer visible. */ atomic_add(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip); ret = dev_priv->display.queue_flip(dev, crtc, fb, obj); if (ret) goto cleanup_pending; intel_disable_fbc(dev); DRM_UNLOCK(dev); return 0; cleanup_pending: atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip); drm_gem_object_unreference(&work->old_fb_obj->base); drm_gem_object_unreference(&obj->base); DRM_UNLOCK(dev); lockmgr(&dev->event_lock, LK_EXCLUSIVE); intel_crtc->unpin_work = NULL; lockmgr(&dev->event_lock, LK_RELEASE); drm_vblank_put(dev, intel_crtc->pipe); free_work: drm_free(work, DRM_MEM_KMS); return ret; } static void intel_sanitize_modesetting(struct drm_device *dev, int pipe, int plane) { struct drm_i915_private *dev_priv = dev->dev_private; u32 reg, val; /* Clear any frame start delays used for debugging left by the BIOS */ for_each_pipe(pipe) { reg = PIPECONF(pipe); I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK); } if (HAS_PCH_SPLIT(dev)) return; /* Who knows what state these registers were left in by the BIOS or * grub? * * If we leave the registers in a conflicting state (e.g. with the * display plane reading from the other pipe than the one we intend * to use) then when we attempt to teardown the active mode, we will * not disable the pipes and planes in the correct order -- leaving * a plane reading from a disabled pipe and possibly leading to * undefined behaviour. */ reg = DSPCNTR(plane); val = I915_READ(reg); if ((val & DISPLAY_PLANE_ENABLE) == 0) return; if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe) return; /* This display plane is active and attached to the other CPU pipe. */ pipe = !pipe; /* Disable the plane and wait for it to stop reading from the pipe. */ intel_disable_plane(dev_priv, plane, pipe); intel_disable_pipe(dev_priv, pipe); } static void intel_crtc_reset(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); /* Reset flags back to the 'unknown' status so that they * will be correctly set on the initial modeset. */ intel_crtc->dpms_mode = -1; /* We need to fix up any BIOS configuration that conflicts with * our expectations. */ intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane); } static struct drm_crtc_helper_funcs intel_helper_funcs = { .dpms = intel_crtc_dpms, .mode_fixup = intel_crtc_mode_fixup, .mode_set = intel_crtc_mode_set, .mode_set_base = intel_pipe_set_base, .mode_set_base_atomic = intel_pipe_set_base_atomic, .load_lut = intel_crtc_load_lut, .disable = intel_crtc_disable, }; static const struct drm_crtc_funcs intel_crtc_funcs = { .reset = intel_crtc_reset, .cursor_set = intel_crtc_cursor_set, .cursor_move = intel_crtc_cursor_move, .gamma_set = intel_crtc_gamma_set, .set_config = drm_crtc_helper_set_config, .destroy = intel_crtc_destroy, .page_flip = intel_crtc_page_flip, }; static void intel_cpu_pll_init(struct drm_device *dev) { #if 0 if (IS_HASWELL(dev)) intel_ddi_pll_init(dev); #endif } static void intel_pch_pll_init(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; int i; if (dev_priv->num_pch_pll == 0) { DRM_DEBUG_KMS("No PCH PLLs on this hardware, skipping initialisation\n"); return; } for (i = 0; i < dev_priv->num_pch_pll; i++) { dev_priv->pch_plls[i].pll_reg = _PCH_DPLL(i); dev_priv->pch_plls[i].fp0_reg = _PCH_FP0(i); dev_priv->pch_plls[i].fp1_reg = _PCH_FP1(i); } } static void intel_crtc_init(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc; int i; intel_crtc = kmalloc(sizeof(struct intel_crtc) + (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), DRM_MEM_KMS, M_WAITOK | M_ZERO); drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs); drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256); for (i = 0; i < 256; i++) { intel_crtc->lut_r[i] = i; intel_crtc->lut_g[i] = i; intel_crtc->lut_b[i] = i; } /* Swap pipes & planes for FBC on pre-965 */ intel_crtc->pipe = pipe; intel_crtc->plane = pipe; intel_crtc->cpu_transcoder = pipe; if (IS_MOBILE(dev) && IS_GEN3(dev)) { DRM_DEBUG_KMS("swapping pipes & planes for FBC\n"); intel_crtc->plane = !pipe; } KASSERT(pipe < DRM_ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) && dev_priv->plane_to_crtc_mapping[intel_crtc->plane] == NULL, ("plane_to_crtc is already initialized")); dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base; dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base; intel_crtc_reset(&intel_crtc->base); intel_crtc->active = true; /* force the pipe off on setup_init_config */ intel_crtc->bpp = 24; /* default for pre-Ironlake */ if (HAS_PCH_SPLIT(dev)) { if (pipe == 2 && IS_IVYBRIDGE(dev)) intel_crtc->no_pll = true; intel_helper_funcs.prepare = ironlake_crtc_prepare; intel_helper_funcs.commit = ironlake_crtc_commit; } else { intel_helper_funcs.prepare = i9xx_crtc_prepare; intel_helper_funcs.commit = i9xx_crtc_commit; } drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs); intel_crtc->busy = false; callout_init_mp(&intel_crtc->idle_callout); } int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, struct drm_file *file) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data; struct drm_mode_object *drmmode_obj; struct intel_crtc *crtc; if (!dev_priv) { DRM_ERROR("called with no initialization\n"); return -EINVAL; } drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id, DRM_MODE_OBJECT_CRTC); if (!drmmode_obj) { DRM_ERROR("no such CRTC id\n"); return -EINVAL; } crtc = to_intel_crtc(obj_to_crtc(drmmode_obj)); pipe_from_crtc_id->pipe = crtc->pipe; return 0; } static int intel_encoder_clones(struct drm_device *dev, int type_mask) { struct intel_encoder *encoder; int index_mask = 0; int entry = 0; list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { if (type_mask & encoder->clone_mask) index_mask |= (1 << entry); entry++; } return index_mask; } static bool has_edp_a(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; if (!IS_MOBILE(dev)) return false; if ((I915_READ(DP_A) & DP_DETECTED) == 0) return false; if (IS_GEN5(dev) && (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE)) return false; return true; } static void intel_setup_outputs(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_encoder *encoder; bool dpd_is_edp = false; bool has_lvds; has_lvds = intel_lvds_init(dev); if (!has_lvds && !HAS_PCH_SPLIT(dev)) { /* disable the panel fitter on everything but LVDS */ I915_WRITE(PFIT_CONTROL, 0); } if (HAS_PCH_SPLIT(dev)) { dpd_is_edp = intel_dpd_is_edp(dev); if (has_edp_a(dev)) intel_dp_init(dev, DP_A); if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED)) intel_dp_init(dev, PCH_DP_D); } intel_crt_init(dev); if (HAS_PCH_SPLIT(dev)) { int found; DRM_DEBUG_KMS( "HDMIB %d PCH_DP_B %d HDMIC %d HDMID %d PCH_DP_C %d PCH_DP_D %d LVDS %d\n", (I915_READ(HDMIB) & PORT_DETECTED) != 0, (I915_READ(PCH_DP_B) & DP_DETECTED) != 0, (I915_READ(HDMIC) & PORT_DETECTED) != 0, (I915_READ(HDMID) & PORT_DETECTED) != 0, (I915_READ(PCH_DP_C) & DP_DETECTED) != 0, (I915_READ(PCH_DP_D) & DP_DETECTED) != 0, (I915_READ(PCH_LVDS) & LVDS_DETECTED) != 0); if (I915_READ(HDMIB) & PORT_DETECTED) { /* PCH SDVOB multiplex with HDMIB */ found = intel_sdvo_init(dev, PCH_SDVOB); if (!found) intel_hdmi_init(dev, HDMIB); if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED)) intel_dp_init(dev, PCH_DP_B); } if (I915_READ(HDMIC) & PORT_DETECTED) intel_hdmi_init(dev, HDMIC); if (I915_READ(HDMID) & PORT_DETECTED) intel_hdmi_init(dev, HDMID); if (I915_READ(PCH_DP_C) & DP_DETECTED) intel_dp_init(dev, PCH_DP_C); if (!dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED)) intel_dp_init(dev, PCH_DP_D); } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) { bool found = false; if (I915_READ(SDVOB) & SDVO_DETECTED) { DRM_DEBUG_KMS("probing SDVOB\n"); found = intel_sdvo_init(dev, SDVOB); if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) { DRM_DEBUG_KMS("probing HDMI on SDVOB\n"); intel_hdmi_init(dev, SDVOB); } if (!found && SUPPORTS_INTEGRATED_DP(dev)) { DRM_DEBUG_KMS("probing DP_B\n"); intel_dp_init(dev, DP_B); } } /* Before G4X SDVOC doesn't have its own detect register */ if (I915_READ(SDVOB) & SDVO_DETECTED) { DRM_DEBUG_KMS("probing SDVOC\n"); found = intel_sdvo_init(dev, SDVOC); } if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) { if (SUPPORTS_INTEGRATED_HDMI(dev)) { DRM_DEBUG_KMS("probing HDMI on SDVOC\n"); intel_hdmi_init(dev, SDVOC); } if (SUPPORTS_INTEGRATED_DP(dev)) { DRM_DEBUG_KMS("probing DP_C\n"); intel_dp_init(dev, DP_C); } } if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED)) { DRM_DEBUG_KMS("probing DP_D\n"); intel_dp_init(dev, DP_D); } } else if (IS_GEN2(dev)) { #if 1 KIB_NOTYET(); #else intel_dvo_init(dev); #endif } if (SUPPORTS_TV(dev)) intel_tv_init(dev); list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { encoder->base.possible_crtcs = encoder->crtc_mask; encoder->base.possible_clones = intel_encoder_clones(dev, encoder->clone_mask); } /* disable all the possible outputs/crtcs before entering KMS mode */ drm_helper_disable_unused_functions(dev); if (HAS_PCH_SPLIT(dev)) ironlake_init_pch_refclk(dev); } static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb) { struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); drm_framebuffer_cleanup(fb); drm_gem_object_unreference_unlocked(&intel_fb->obj->base); drm_free(intel_fb, DRM_MEM_KMS); } static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb, struct drm_file *file, unsigned int *handle) { struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); struct drm_i915_gem_object *obj = intel_fb->obj; return drm_gem_handle_create(file, &obj->base, handle); } static const struct drm_framebuffer_funcs intel_fb_funcs = { .destroy = intel_user_framebuffer_destroy, .create_handle = intel_user_framebuffer_create_handle, }; int intel_framebuffer_init(struct drm_device *dev, struct intel_framebuffer *intel_fb, struct drm_mode_fb_cmd2 *mode_cmd, struct drm_i915_gem_object *obj) { int ret; if (obj->tiling_mode == I915_TILING_Y) return -EINVAL; if (mode_cmd->pitches[0] & 63) return -EINVAL; switch (mode_cmd->pixel_format) { case DRM_FORMAT_RGB332: case DRM_FORMAT_RGB565: case DRM_FORMAT_XRGB8888: case DRM_FORMAT_XBGR8888: case DRM_FORMAT_ARGB8888: case DRM_FORMAT_XRGB2101010: case DRM_FORMAT_ARGB2101010: /* RGB formats are common across chipsets */ break; case DRM_FORMAT_YUYV: case DRM_FORMAT_UYVY: case DRM_FORMAT_YVYU: case DRM_FORMAT_VYUY: break; default: DRM_DEBUG_KMS("unsupported pixel format %u\n", mode_cmd->pixel_format); return -EINVAL; } ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs); if (ret) { DRM_ERROR("framebuffer init failed %d\n", ret); return ret; } drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd); intel_fb->obj = obj; return 0; } static struct drm_framebuffer * intel_user_framebuffer_create(struct drm_device *dev, struct drm_file *filp, struct drm_mode_fb_cmd2 *mode_cmd) { struct drm_i915_gem_object *obj; obj = to_intel_bo(drm_gem_object_lookup(dev, filp, mode_cmd->handles[0])); if (&obj->base == NULL) return ERR_PTR(-ENOENT); return intel_framebuffer_create(dev, mode_cmd, obj); } static const struct drm_mode_config_funcs intel_mode_funcs = { .fb_create = intel_user_framebuffer_create, .output_poll_changed = intel_fb_output_poll_changed, }; /* Set up chip specific display functions */ static void intel_init_display(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; /* We always want a DPMS function */ if (HAS_PCH_SPLIT(dev)) { dev_priv->display.dpms = ironlake_crtc_dpms; dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set; dev_priv->display.update_plane = ironlake_update_plane; } else { dev_priv->display.dpms = i9xx_crtc_dpms; dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set; dev_priv->display.update_plane = i9xx_update_plane; } /* Returns the core display clock speed */ if (IS_VALLEYVIEW(dev)) dev_priv->display.get_display_clock_speed = valleyview_get_display_clock_speed; else if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev))) dev_priv->display.get_display_clock_speed = i945_get_display_clock_speed; else if (IS_I915G(dev)) dev_priv->display.get_display_clock_speed = i915_get_display_clock_speed; else if (IS_I945GM(dev) || IS_845G(dev) || IS_PINEVIEW_M(dev)) dev_priv->display.get_display_clock_speed = i9xx_misc_get_display_clock_speed; else if (IS_I915GM(dev)) dev_priv->display.get_display_clock_speed = i915gm_get_display_clock_speed; else if (IS_I865G(dev)) dev_priv->display.get_display_clock_speed = i865_get_display_clock_speed; else if (IS_I85X(dev)) dev_priv->display.get_display_clock_speed = i855_get_display_clock_speed; else /* 852, 830 */ dev_priv->display.get_display_clock_speed = i830_get_display_clock_speed; if (HAS_PCH_SPLIT(dev)) { if (IS_GEN5(dev)) { dev_priv->display.fdi_link_train = ironlake_fdi_link_train; dev_priv->display.write_eld = ironlake_write_eld; } else if (IS_GEN6(dev)) { dev_priv->display.fdi_link_train = gen6_fdi_link_train; dev_priv->display.write_eld = ironlake_write_eld; } else if (IS_IVYBRIDGE(dev)) { /* FIXME: detect B0+ stepping and use auto training */ dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train; dev_priv->display.write_eld = ironlake_write_eld; } else dev_priv->display.update_wm = NULL; } else if (IS_G4X(dev)) { dev_priv->display.write_eld = g4x_write_eld; } /* Default just returns -ENODEV to indicate unsupported */ dev_priv->display.queue_flip = intel_default_queue_flip; switch (INTEL_INFO(dev)->gen) { case 2: dev_priv->display.queue_flip = intel_gen2_queue_flip; break; case 3: dev_priv->display.queue_flip = intel_gen3_queue_flip; break; case 4: case 5: dev_priv->display.queue_flip = intel_gen4_queue_flip; break; case 6: dev_priv->display.queue_flip = intel_gen6_queue_flip; break; case 7: dev_priv->display.queue_flip = intel_gen7_queue_flip; break; } } /* * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend, * resume, or other times. This quirk makes sure that's the case for * affected systems. */ static void quirk_pipea_force(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; dev_priv->quirks |= QUIRK_PIPEA_FORCE; DRM_DEBUG("applying pipe a force quirk\n"); } /* * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason */ static void quirk_ssc_force_disable(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE; } struct intel_quirk { int device; int subsystem_vendor; int subsystem_device; void (*hook)(struct drm_device *dev); }; #define PCI_ANY_ID (~0u) struct intel_quirk intel_quirks[] = { /* HP Mini needs pipe A force quirk (LP: #322104) */ { 0x27ae, 0x103c, 0x361a, quirk_pipea_force }, /* Thinkpad R31 needs pipe A force quirk */ { 0x3577, 0x1014, 0x0505, quirk_pipea_force }, /* Toshiba Protege R-205, S-209 needs pipe A force quirk */ { 0x2592, 0x1179, 0x0001, quirk_pipea_force }, /* ThinkPad X30 needs pipe A force quirk (LP: #304614) */ { 0x3577, 0x1014, 0x0513, quirk_pipea_force }, /* ThinkPad X40 needs pipe A force quirk */ /* ThinkPad T60 needs pipe A force quirk (bug #16494) */ { 0x2782, 0x17aa, 0x201a, quirk_pipea_force }, /* 855 & before need to leave pipe A & dpll A up */ { 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force }, { 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force }, /* Lenovo U160 cannot use SSC on LVDS */ { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable }, /* Sony Vaio Y cannot use SSC on LVDS */ { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable }, }; static void intel_init_quirks(struct drm_device *dev) { struct intel_quirk *q; device_t d; int i; d = dev->dev; for (i = 0; i < DRM_ARRAY_SIZE(intel_quirks); i++) { q = &intel_quirks[i]; if (pci_get_device(d) == q->device && (pci_get_subvendor(d) == q->subsystem_vendor || q->subsystem_vendor == PCI_ANY_ID) && (pci_get_subdevice(d) == q->subsystem_device || q->subsystem_device == PCI_ANY_ID)) q->hook(dev); } } /* Disable the VGA plane that we never use */ static void i915_disable_vga(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u8 sr1; u32 vga_reg; if (HAS_PCH_SPLIT(dev)) vga_reg = CPU_VGACNTRL; else vga_reg = VGACNTRL; #if 0 vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO); #endif outb(VGA_SR_INDEX, 1); sr1 = inb(VGA_SR_DATA); outb(VGA_SR_DATA, sr1 | 1 << 5); #if 0 vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); #endif DELAY(300); I915_WRITE(vga_reg, VGA_DISP_DISABLE); POSTING_READ(vga_reg); } void intel_modeset_init_hw(struct drm_device *dev) { /* We attempt to init the necessary power wells early in the initialization * time, so the subsystems that expect power to be enabled can work. */ intel_init_power_wells(dev); #if 0 intel_prepare_ddi(dev); #endif intel_init_clock_gating(dev); DRM_LOCK(dev); intel_enable_gt_powersave(dev); DRM_UNLOCK(dev); } void intel_modeset_init(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; int i, ret; drm_mode_config_init(dev); dev->mode_config.min_width = 0; dev->mode_config.min_height = 0; dev->mode_config.preferred_depth = 24; dev->mode_config.prefer_shadow = 1; dev->mode_config.funcs = &intel_mode_funcs; intel_init_quirks(dev); intel_init_pm(dev); intel_init_display(dev); if (IS_GEN2(dev)) { dev->mode_config.max_width = 2048; dev->mode_config.max_height = 2048; } else if (IS_GEN3(dev)) { dev->mode_config.max_width = 4096; dev->mode_config.max_height = 4096; } else { dev->mode_config.max_width = 8192; dev->mode_config.max_height = 8192; } dev->mode_config.fb_base = dev->agp->base; DRM_DEBUG_KMS("%d display pipe%s available.\n", dev_priv->num_pipe, dev_priv->num_pipe > 1 ? "s" : ""); for (i = 0; i < dev_priv->num_pipe; i++) { intel_crtc_init(dev, i); ret = intel_plane_init(dev, i); if (ret) DRM_DEBUG_KMS("plane %d init failed: %d\n", i, ret); } intel_cpu_pll_init(dev); intel_pch_pll_init(dev); /* Just disable it once at startup */ i915_disable_vga(dev); intel_setup_outputs(dev); } void intel_modeset_gem_init(struct drm_device *dev) { intel_modeset_init_hw(dev); intel_setup_overlay(dev); } void intel_modeset_cleanup(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_crtc *crtc; struct intel_crtc *intel_crtc; drm_kms_helper_poll_fini(dev); DRM_LOCK(dev); #if 0 intel_unregister_dsm_handler(); #endif list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { /* Skip inactive CRTCs */ if (!crtc->fb) continue; intel_crtc = to_intel_crtc(crtc); intel_increase_pllclock(crtc); } intel_disable_fbc(dev); intel_disable_gt_powersave(dev); ironlake_teardown_rc6(dev); if (IS_VALLEYVIEW(dev)) vlv_init_dpio(dev); DRM_UNLOCK(dev); /* Disable the irq before mode object teardown, for the irq might * enqueue unpin/hotplug work. */ drm_irq_uninstall(dev); cancel_work_sync(&dev_priv->hotplug_work); cancel_work_sync(&dev_priv->rps.work); /* flush any delayed tasks or pending work */ flush_scheduled_work(); /* destroy backlight, if any, before the connectors */ intel_panel_destroy_backlight(dev); drm_mode_config_cleanup(dev); } /* * Return which encoder is currently attached for connector. */ struct drm_encoder *intel_best_encoder(struct drm_connector *connector) { return &intel_attached_encoder(connector)->base; } void intel_connector_attach_encoder(struct intel_connector *connector, struct intel_encoder *encoder) { connector->encoder = encoder; drm_mode_connector_attach_encoder(&connector->base, &encoder->base); } /* * set vga decode state - true == enable VGA decode */ int intel_modeset_vga_set_state(struct drm_device *dev, bool state) { struct drm_i915_private *dev_priv; device_t bridge_dev; u16 gmch_ctrl; dev_priv = dev->dev_private; bridge_dev = intel_gtt_get_bridge_device(); gmch_ctrl = pci_read_config(bridge_dev, INTEL_GMCH_CTRL, 2); if (state) gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE; else gmch_ctrl |= INTEL_GMCH_VGA_DISABLE; pci_write_config(bridge_dev, INTEL_GMCH_CTRL, gmch_ctrl, 2); return (0); } struct intel_display_error_state { struct intel_cursor_error_state { u32 control; u32 position; u32 base; u32 size; } cursor[2]; struct intel_pipe_error_state { u32 conf; u32 source; u32 htotal; u32 hblank; u32 hsync; u32 vtotal; u32 vblank; u32 vsync; } pipe[2]; struct intel_plane_error_state { u32 control; u32 stride; u32 size; u32 pos; u32 addr; u32 surface; u32 tile_offset; } plane[2]; }; struct intel_display_error_state * intel_display_capture_error_state(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; struct intel_display_error_state *error; int i; error = kmalloc(sizeof(*error), DRM_MEM_KMS, M_NOWAIT); if (error == NULL) return NULL; for (i = 0; i < 2; i++) { error->cursor[i].control = I915_READ(CURCNTR(i)); error->cursor[i].position = I915_READ(CURPOS(i)); error->cursor[i].base = I915_READ(CURBASE(i)); error->plane[i].control = I915_READ(DSPCNTR(i)); error->plane[i].stride = I915_READ(DSPSTRIDE(i)); error->plane[i].size = I915_READ(DSPSIZE(i)); error->plane[i].pos = I915_READ(DSPPOS(i)); error->plane[i].addr = I915_READ(DSPADDR(i)); if (INTEL_INFO(dev)->gen >= 4) { error->plane[i].surface = I915_READ(DSPSURF(i)); error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i)); } error->pipe[i].conf = I915_READ(PIPECONF(i)); error->pipe[i].source = I915_READ(PIPESRC(i)); error->pipe[i].htotal = I915_READ(HTOTAL(i)); error->pipe[i].hblank = I915_READ(HBLANK(i)); error->pipe[i].hsync = I915_READ(HSYNC(i)); error->pipe[i].vtotal = I915_READ(VTOTAL(i)); error->pipe[i].vblank = I915_READ(VBLANK(i)); error->pipe[i].vsync = I915_READ(VSYNC(i)); } return error; } void intel_display_print_error_state(struct sbuf *m, struct drm_device *dev, struct intel_display_error_state *error) { int i; for (i = 0; i < 2; i++) { sbuf_printf(m, "Pipe [%d]:\n", i); sbuf_printf(m, " CONF: %08x\n", error->pipe[i].conf); sbuf_printf(m, " SRC: %08x\n", error->pipe[i].source); sbuf_printf(m, " HTOTAL: %08x\n", error->pipe[i].htotal); sbuf_printf(m, " HBLANK: %08x\n", error->pipe[i].hblank); sbuf_printf(m, " HSYNC: %08x\n", error->pipe[i].hsync); sbuf_printf(m, " VTOTAL: %08x\n", error->pipe[i].vtotal); sbuf_printf(m, " VBLANK: %08x\n", error->pipe[i].vblank); sbuf_printf(m, " VSYNC: %08x\n", error->pipe[i].vsync); sbuf_printf(m, "Plane [%d]:\n", i); sbuf_printf(m, " CNTR: %08x\n", error->plane[i].control); sbuf_printf(m, " STRIDE: %08x\n", error->plane[i].stride); sbuf_printf(m, " SIZE: %08x\n", error->plane[i].size); sbuf_printf(m, " POS: %08x\n", error->plane[i].pos); sbuf_printf(m, " ADDR: %08x\n", error->plane[i].addr); if (INTEL_INFO(dev)->gen >= 4) { sbuf_printf(m, " SURF: %08x\n", error->plane[i].surface); sbuf_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset); } sbuf_printf(m, "Cursor [%d]:\n", i); sbuf_printf(m, " CNTR: %08x\n", error->cursor[i].control); sbuf_printf(m, " POS: %08x\n", error->cursor[i].position); sbuf_printf(m, " BASE: %08x\n", error->cursor[i].base); } }