/* * Copyright (c) 1994,1997 John S. Dyson * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice immediately at the beginning of the file, without modification, * this list of conditions, and the following disclaimer. * 2. Absolutely no warranty of function or purpose is made by the author * John S. Dyson. * * $FreeBSD: src/sys/kern/vfs_bio.c,v 1.242.2.20 2003/05/28 18:38:10 alc Exp $ */ /* * this file contains a new buffer I/O scheme implementing a coherent * VM object and buffer cache scheme. Pains have been taken to make * sure that the performance degradation associated with schemes such * as this is not realized. * * Author: John S. Dyson * Significant help during the development and debugging phases * had been provided by David Greenman, also of the FreeBSD core team. * * see man buf(9) for more info. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "opt_ddb.h" #ifdef DDB #include #endif /* * Buffer queues. */ enum bufq_type { BQUEUE_NONE, /* not on any queue */ BQUEUE_LOCKED, /* locked buffers */ BQUEUE_CLEAN, /* non-B_DELWRI buffers */ BQUEUE_DIRTY, /* B_DELWRI buffers */ BQUEUE_DIRTY_HW, /* B_DELWRI buffers - heavy weight */ BQUEUE_EMPTYKVA, /* empty buffer headers with KVA assignment */ BQUEUE_EMPTY, /* empty buffer headers */ BUFFER_QUEUES /* number of buffer queues */ }; typedef enum bufq_type bufq_type_t; #define BD_WAKE_SIZE 16384 #define BD_WAKE_MASK (BD_WAKE_SIZE - 1) TAILQ_HEAD(bqueues, buf); struct bufpcpu { struct spinlock spin; struct bqueues bufqueues[BUFFER_QUEUES]; } __cachealign; struct bufpcpu bufpcpu[MAXCPU]; static MALLOC_DEFINE(M_BIOBUF, "BIO buffer", "BIO buffer"); struct buf *buf; /* buffer header pool */ static void vfs_clean_pages(struct buf *bp); static void vfs_clean_one_page(struct buf *bp, int pageno, vm_page_t m); #if 0 static void vfs_dirty_one_page(struct buf *bp, int pageno, vm_page_t m); #endif static void vfs_vmio_release(struct buf *bp); static int flushbufqueues(struct buf *marker, bufq_type_t q); static vm_page_t bio_page_alloc(struct buf *bp, vm_object_t obj, vm_pindex_t pg, int deficit); static void bd_signal(long totalspace); static void buf_daemon(void); static void buf_daemon_hw(void); /* * bogus page -- for I/O to/from partially complete buffers * this is a temporary solution to the problem, but it is not * really that bad. it would be better to split the buffer * for input in the case of buffers partially already in memory, * but the code is intricate enough already. */ vm_page_t bogus_page; /* * These are all static, but make the ones we export globals so we do * not need to use compiler magic. */ long bufspace; /* locked by buffer_map */ long maxbufspace; static long bufmallocspace; /* atomic ops */ long maxbufmallocspace, lobufspace, hibufspace; static long bufreusecnt, bufdefragcnt, buffreekvacnt; static long lorunningspace; static long hirunningspace; static long dirtykvaspace; /* atomic */ long dirtybufspace; /* atomic (global for systat) */ static long dirtybufcount; /* atomic */ static long dirtybufspacehw; /* atomic */ static long dirtybufcounthw; /* atomic */ static long runningbufspace; /* atomic */ static long runningbufcount; /* atomic */ long lodirtybufspace; long hidirtybufspace; static int getnewbufcalls; static int getnewbufrestarts; static int recoverbufcalls; static int needsbuffer; /* atomic */ static int runningbufreq; /* atomic */ static int bd_request; /* atomic */ static int bd_request_hw; /* atomic */ static u_int bd_wake_ary[BD_WAKE_SIZE]; static u_int bd_wake_index; static u_int vm_cycle_point = 40; /* 23-36 will migrate more act->inact */ static int debug_commit; static int debug_bufbio; static struct thread *bufdaemon_td; static struct thread *bufdaemonhw_td; static u_int lowmempgallocs; static u_int lowmempgfails; /* * Sysctls for operational control of the buffer cache. */ SYSCTL_LONG(_vfs, OID_AUTO, lodirtybufspace, CTLFLAG_RW, &lodirtybufspace, 0, "Number of dirty buffers to flush before bufdaemon becomes inactive"); SYSCTL_LONG(_vfs, OID_AUTO, hidirtybufspace, CTLFLAG_RW, &hidirtybufspace, 0, "High watermark used to trigger explicit flushing of dirty buffers"); SYSCTL_LONG(_vfs, OID_AUTO, lorunningspace, CTLFLAG_RW, &lorunningspace, 0, "Minimum amount of buffer space required for active I/O"); SYSCTL_LONG(_vfs, OID_AUTO, hirunningspace, CTLFLAG_RW, &hirunningspace, 0, "Maximum amount of buffer space to usable for active I/O"); SYSCTL_UINT(_vfs, OID_AUTO, lowmempgallocs, CTLFLAG_RW, &lowmempgallocs, 0, "Page allocations done during periods of very low free memory"); SYSCTL_UINT(_vfs, OID_AUTO, lowmempgfails, CTLFLAG_RW, &lowmempgfails, 0, "Page allocations which failed during periods of very low free memory"); SYSCTL_UINT(_vfs, OID_AUTO, vm_cycle_point, CTLFLAG_RW, &vm_cycle_point, 0, "Recycle pages to active or inactive queue transition pt 0-64"); /* * Sysctls determining current state of the buffer cache. */ SYSCTL_LONG(_vfs, OID_AUTO, nbuf, CTLFLAG_RD, &nbuf, 0, "Total number of buffers in buffer cache"); SYSCTL_LONG(_vfs, OID_AUTO, dirtykvaspace, CTLFLAG_RD, &dirtykvaspace, 0, "KVA reserved by dirty buffers (all)"); SYSCTL_LONG(_vfs, OID_AUTO, dirtybufspace, CTLFLAG_RD, &dirtybufspace, 0, "Pending bytes of dirty buffers (all)"); SYSCTL_LONG(_vfs, OID_AUTO, dirtybufspacehw, CTLFLAG_RD, &dirtybufspacehw, 0, "Pending bytes of dirty buffers (heavy weight)"); SYSCTL_LONG(_vfs, OID_AUTO, dirtybufcount, CTLFLAG_RD, &dirtybufcount, 0, "Pending number of dirty buffers"); SYSCTL_LONG(_vfs, OID_AUTO, dirtybufcounthw, CTLFLAG_RD, &dirtybufcounthw, 0, "Pending number of dirty buffers (heavy weight)"); SYSCTL_LONG(_vfs, OID_AUTO, runningbufspace, CTLFLAG_RD, &runningbufspace, 0, "I/O bytes currently in progress due to asynchronous writes"); SYSCTL_LONG(_vfs, OID_AUTO, runningbufcount, CTLFLAG_RD, &runningbufcount, 0, "I/O buffers currently in progress due to asynchronous writes"); SYSCTL_LONG(_vfs, OID_AUTO, maxbufspace, CTLFLAG_RD, &maxbufspace, 0, "Hard limit on maximum amount of memory usable for buffer space"); SYSCTL_LONG(_vfs, OID_AUTO, hibufspace, CTLFLAG_RD, &hibufspace, 0, "Soft limit on maximum amount of memory usable for buffer space"); SYSCTL_LONG(_vfs, OID_AUTO, lobufspace, CTLFLAG_RD, &lobufspace, 0, "Minimum amount of memory to reserve for system buffer space"); SYSCTL_LONG(_vfs, OID_AUTO, bufspace, CTLFLAG_RD, &bufspace, 0, "Amount of memory available for buffers"); SYSCTL_LONG(_vfs, OID_AUTO, maxmallocbufspace, CTLFLAG_RD, &maxbufmallocspace, 0, "Maximum amount of memory reserved for buffers using malloc"); SYSCTL_LONG(_vfs, OID_AUTO, bufmallocspace, CTLFLAG_RD, &bufmallocspace, 0, "Amount of memory left for buffers using malloc-scheme"); SYSCTL_INT(_vfs, OID_AUTO, getnewbufcalls, CTLFLAG_RD, &getnewbufcalls, 0, "New buffer header acquisition requests"); SYSCTL_INT(_vfs, OID_AUTO, getnewbufrestarts, CTLFLAG_RD, &getnewbufrestarts, 0, "New buffer header acquisition restarts"); SYSCTL_INT(_vfs, OID_AUTO, recoverbufcalls, CTLFLAG_RD, &recoverbufcalls, 0, "Recover VM space in an emergency"); SYSCTL_INT(_vfs, OID_AUTO, bufdefragcnt, CTLFLAG_RD, &bufdefragcnt, 0, "Buffer acquisition restarts due to fragmented buffer map"); SYSCTL_INT(_vfs, OID_AUTO, buffreekvacnt, CTLFLAG_RD, &buffreekvacnt, 0, "Amount of time KVA space was deallocated in an arbitrary buffer"); SYSCTL_INT(_vfs, OID_AUTO, bufreusecnt, CTLFLAG_RD, &bufreusecnt, 0, "Amount of time buffer re-use operations were successful"); SYSCTL_INT(_vfs, OID_AUTO, debug_commit, CTLFLAG_RW, &debug_commit, 0, ""); SYSCTL_INT(_vfs, OID_AUTO, debug_bufbio, CTLFLAG_RW, &debug_bufbio, 0, ""); SYSCTL_INT(_debug_sizeof, OID_AUTO, buf, CTLFLAG_RD, 0, sizeof(struct buf), "sizeof(struct buf)"); char *buf_wmesg = BUF_WMESG; #define VFS_BIO_NEED_ANY 0x01 /* any freeable buffer */ #define VFS_BIO_NEED_UNUSED02 0x02 #define VFS_BIO_NEED_UNUSED04 0x04 #define VFS_BIO_NEED_BUFSPACE 0x08 /* wait for buf space, lo hysteresis */ /* * bufspacewakeup: * * Called when buffer space is potentially available for recovery. * getnewbuf() will block on this flag when it is unable to free * sufficient buffer space. Buffer space becomes recoverable when * bp's get placed back in the queues. */ static __inline void bufspacewakeup(void) { /* * If someone is waiting for BUF space, wake them up. Even * though we haven't freed the kva space yet, the waiting * process will be able to now. */ for (;;) { int flags = needsbuffer; cpu_ccfence(); if ((flags & VFS_BIO_NEED_BUFSPACE) == 0) break; if (atomic_cmpset_int(&needsbuffer, flags, flags & ~VFS_BIO_NEED_BUFSPACE)) { wakeup(&needsbuffer); break; } /* retry */ } } /* * runningbufwakeup: * * Accounting for I/O in progress. * */ static __inline void runningbufwakeup(struct buf *bp) { long totalspace; long limit; long flags; if ((totalspace = bp->b_runningbufspace) != 0) { atomic_add_long(&runningbufspace, -totalspace); atomic_add_long(&runningbufcount, -1); bp->b_runningbufspace = 0; /* * see waitrunningbufspace() for limit test. */ limit = hirunningspace * 3 / 6; for (;;) { flags = runningbufreq; cpu_ccfence(); if (flags == 0) break; if (atomic_cmpset_int(&runningbufreq, flags, 0)) { wakeup(&runningbufreq); break; } /* retry */ } bd_signal(totalspace); } } /* * bufcountwakeup: * * Called when a buffer has been added to one of the free queues to * account for the buffer and to wakeup anyone waiting for free buffers. * This typically occurs when large amounts of metadata are being handled * by the buffer cache ( else buffer space runs out first, usually ). */ static __inline void bufcountwakeup(void) { long flags; for (;;) { flags = needsbuffer; if (flags == 0) break; if (atomic_cmpset_int(&needsbuffer, flags, (flags & ~VFS_BIO_NEED_ANY))) { wakeup(&needsbuffer); break; } /* retry */ } } /* * waitrunningbufspace() * * If runningbufspace exceeds 4/6 hirunningspace we block until * runningbufspace drops to 3/6 hirunningspace. We also block if another * thread blocked here in order to be fair, even if runningbufspace * is now lower than the limit. * * The caller may be using this function to block in a tight loop, we * must block while runningbufspace is greater than at least * hirunningspace * 3 / 6. */ void waitrunningbufspace(void) { long limit = hirunningspace * 4 / 6; long flags; while (runningbufspace > limit || runningbufreq) { tsleep_interlock(&runningbufreq, 0); flags = atomic_fetchadd_int(&runningbufreq, 1); if (runningbufspace > limit || flags) tsleep(&runningbufreq, PINTERLOCKED, "wdrn1", hz); } } /* * buf_dirty_count_severe: * * Return true if we have too many dirty buffers. */ int buf_dirty_count_severe(void) { return (runningbufspace + dirtykvaspace >= hidirtybufspace || dirtybufcount >= nbuf / 2); } /* * Return true if the amount of running I/O is severe and BIOQ should * start bursting. */ int buf_runningbufspace_severe(void) { return (runningbufspace >= hirunningspace * 4 / 6); } /* * vfs_buf_test_cache: * * Called when a buffer is extended. This function clears the B_CACHE * bit if the newly extended portion of the buffer does not contain * valid data. * * NOTE! Dirty VM pages are not processed into dirty (B_DELWRI) buffer * cache buffers. The VM pages remain dirty, as someone had mmap()'d * them while a clean buffer was present. */ static __inline__ void vfs_buf_test_cache(struct buf *bp, vm_ooffset_t foff, vm_offset_t off, vm_offset_t size, vm_page_t m) { if (bp->b_flags & B_CACHE) { int base = (foff + off) & PAGE_MASK; if (vm_page_is_valid(m, base, size) == 0) bp->b_flags &= ~B_CACHE; } } /* * bd_speedup() * * Spank the buf_daemon[_hw] if the total dirty buffer space exceeds the * low water mark. */ static __inline__ void bd_speedup(void) { if (dirtykvaspace < lodirtybufspace && dirtybufcount < nbuf / 2) return; if (bd_request == 0 && (dirtykvaspace > lodirtybufspace / 2 || dirtybufcount - dirtybufcounthw >= nbuf / 2)) { if (atomic_fetchadd_int(&bd_request, 1) == 0) wakeup(&bd_request); } if (bd_request_hw == 0 && (dirtykvaspace > lodirtybufspace / 2 || dirtybufcounthw >= nbuf / 2)) { if (atomic_fetchadd_int(&bd_request_hw, 1) == 0) wakeup(&bd_request_hw); } } /* * bd_heatup() * * Get the buf_daemon heated up when the number of running and dirty * buffers exceeds the mid-point. * * Return the total number of dirty bytes past the second mid point * as a measure of how much excess dirty data there is in the system. */ long bd_heatup(void) { long mid1; long mid2; long totalspace; mid1 = lodirtybufspace + (hidirtybufspace - lodirtybufspace) / 2; totalspace = runningbufspace + dirtykvaspace; if (totalspace >= mid1 || dirtybufcount >= nbuf / 2) { bd_speedup(); mid2 = mid1 + (hidirtybufspace - mid1) / 2; if (totalspace >= mid2) return(totalspace - mid2); } return(0); } /* * bd_wait() * * Wait for the buffer cache to flush (totalspace) bytes worth of * buffers, then return. * * Regardless this function blocks while the number of dirty buffers * exceeds hidirtybufspace. */ void bd_wait(long totalspace) { u_int i; u_int j; u_int mi; int count; if (curthread == bufdaemonhw_td || curthread == bufdaemon_td) return; while (totalspace > 0) { bd_heatup(); /* * Order is important. Suppliers adjust bd_wake_index after * updating runningbufspace/dirtykvaspace. We want to fetch * bd_wake_index before accessing. Any error should thus * be in our favor. */ i = atomic_fetchadd_int(&bd_wake_index, 0); if (totalspace > runningbufspace + dirtykvaspace) totalspace = runningbufspace + dirtykvaspace; count = totalspace / BKVASIZE; if (count >= BD_WAKE_SIZE / 2) count = BD_WAKE_SIZE / 2; i = i + count; mi = i & BD_WAKE_MASK; /* * This is not a strict interlock, so we play a bit loose * with locking access to dirtybufspace*. We have to re-check * bd_wake_index to ensure that it hasn't passed us. */ tsleep_interlock(&bd_wake_ary[mi], 0); atomic_add_int(&bd_wake_ary[mi], 1); j = atomic_fetchadd_int(&bd_wake_index, 0); if ((int)(i - j) >= 0) tsleep(&bd_wake_ary[mi], PINTERLOCKED, "flstik", hz); totalspace = runningbufspace + dirtykvaspace - hidirtybufspace; } } /* * bd_signal() * * This function is called whenever runningbufspace or dirtykvaspace * is reduced. Track threads waiting for run+dirty buffer I/O * complete. */ static void bd_signal(long totalspace) { u_int i; if (totalspace > 0) { if (totalspace > BKVASIZE * BD_WAKE_SIZE) totalspace = BKVASIZE * BD_WAKE_SIZE; while (totalspace > 0) { i = atomic_fetchadd_int(&bd_wake_index, 1); i &= BD_WAKE_MASK; if (atomic_readandclear_int(&bd_wake_ary[i])) wakeup(&bd_wake_ary[i]); totalspace -= BKVASIZE; } } } /* * BIO tracking support routines. * * Release a ref on a bio_track. Wakeup requests are atomically released * along with the last reference so bk_active will never wind up set to * only 0x80000000. */ static void bio_track_rel(struct bio_track *track) { int active; int desired; /* * Shortcut */ active = track->bk_active; if (active == 1 && atomic_cmpset_int(&track->bk_active, 1, 0)) return; /* * Full-on. Note that the wait flag is only atomically released on * the 1->0 count transition. * * We check for a negative count transition using bit 30 since bit 31 * has a different meaning. */ for (;;) { desired = (active & 0x7FFFFFFF) - 1; if (desired) desired |= active & 0x80000000; if (atomic_cmpset_int(&track->bk_active, active, desired)) { if (desired & 0x40000000) panic("bio_track_rel: bad count: %p", track); if (active & 0x80000000) wakeup(track); break; } active = track->bk_active; } } /* * Wait for the tracking count to reach 0. * * Use atomic ops such that the wait flag is only set atomically when * bk_active is non-zero. */ int bio_track_wait(struct bio_track *track, int slp_flags, int slp_timo) { int active; int desired; int error; /* * Shortcut */ if (track->bk_active == 0) return(0); /* * Full-on. Note that the wait flag may only be atomically set if * the active count is non-zero. * * NOTE: We cannot optimize active == desired since a wakeup could * clear active prior to our tsleep_interlock(). */ error = 0; while ((active = track->bk_active) != 0) { cpu_ccfence(); desired = active | 0x80000000; tsleep_interlock(track, slp_flags); if (atomic_cmpset_int(&track->bk_active, active, desired)) { error = tsleep(track, slp_flags | PINTERLOCKED, "trwait", slp_timo); if (error) break; } } return (error); } /* * bufinit: * * Load time initialisation of the buffer cache, called from machine * dependant initialization code. */ static void bufinit(void *dummy __unused) { struct bufpcpu *pcpu; struct buf *bp; vm_offset_t bogus_offset; int i; int j; long n; /* next, make a null set of free lists */ for (i = 0; i < ncpus; ++i) { pcpu = &bufpcpu[i]; spin_init(&pcpu->spin, "bufinit"); for (j = 0; j < BUFFER_QUEUES; j++) TAILQ_INIT(&pcpu->bufqueues[j]); } /* finally, initialize each buffer header and stick on empty q */ i = 0; pcpu = &bufpcpu[i]; for (n = 0; n < nbuf; n++) { bp = &buf[n]; bzero(bp, sizeof *bp); bp->b_flags = B_INVAL; /* we're just an empty header */ bp->b_cmd = BUF_CMD_DONE; bp->b_qindex = BQUEUE_EMPTY; bp->b_qcpu = i; initbufbio(bp); xio_init(&bp->b_xio); buf_dep_init(bp); TAILQ_INSERT_TAIL(&pcpu->bufqueues[bp->b_qindex], bp, b_freelist); i = (i + 1) % ncpus; pcpu = &bufpcpu[i]; } /* * maxbufspace is the absolute maximum amount of buffer space we are * allowed to reserve in KVM and in real terms. The absolute maximum * is nominally used by buf_daemon. hibufspace is the nominal maximum * used by most other processes. The differential is required to * ensure that buf_daemon is able to run when other processes might * be blocked waiting for buffer space. * * maxbufspace is based on BKVASIZE. Allocating buffers larger then * this may result in KVM fragmentation which is not handled optimally * by the system. */ maxbufspace = nbuf * BKVASIZE; hibufspace = lmax(3 * maxbufspace / 4, maxbufspace - MAXBSIZE * 10); lobufspace = hibufspace - MAXBSIZE; lorunningspace = 512 * 1024; /* hirunningspace -- see below */ /* * Limit the amount of malloc memory since it is wired permanently * into the kernel space. Even though this is accounted for in * the buffer allocation, we don't want the malloced region to grow * uncontrolled. The malloc scheme improves memory utilization * significantly on average (small) directories. */ maxbufmallocspace = hibufspace / 20; /* * Reduce the chance of a deadlock occuring by limiting the number * of delayed-write dirty buffers we allow to stack up. * * We don't want too much actually queued to the device at once * (XXX this needs to be per-mount!), because the buffers will * wind up locked for a very long period of time while the I/O * drains. */ hidirtybufspace = hibufspace / 2; /* dirty + running */ hirunningspace = hibufspace / 16; /* locked & queued to device */ if (hirunningspace < 1024 * 1024) hirunningspace = 1024 * 1024; dirtykvaspace = 0; dirtybufspace = 0; dirtybufspacehw = 0; lodirtybufspace = hidirtybufspace / 2; /* * Maximum number of async ops initiated per buf_daemon loop. This is * somewhat of a hack at the moment, we really need to limit ourselves * based on the number of bytes of I/O in-transit that were initiated * from buf_daemon. */ bogus_offset = kmem_alloc_pageable(&kernel_map, PAGE_SIZE); vm_object_hold(&kernel_object); bogus_page = vm_page_alloc(&kernel_object, (bogus_offset >> PAGE_SHIFT), VM_ALLOC_NORMAL); vm_object_drop(&kernel_object); vmstats.v_wire_count++; } SYSINIT(do_bufinit, SI_BOOT2_MACHDEP, SI_ORDER_FIRST, bufinit, NULL); /* * Initialize the embedded bio structures, typically used by * deprecated code which tries to allocate its own struct bufs. */ void initbufbio(struct buf *bp) { bp->b_bio1.bio_buf = bp; bp->b_bio1.bio_prev = NULL; bp->b_bio1.bio_offset = NOOFFSET; bp->b_bio1.bio_next = &bp->b_bio2; bp->b_bio1.bio_done = NULL; bp->b_bio1.bio_flags = 0; bp->b_bio2.bio_buf = bp; bp->b_bio2.bio_prev = &bp->b_bio1; bp->b_bio2.bio_offset = NOOFFSET; bp->b_bio2.bio_next = NULL; bp->b_bio2.bio_done = NULL; bp->b_bio2.bio_flags = 0; BUF_LOCKINIT(bp); } /* * Reinitialize the embedded bio structures as well as any additional * translation cache layers. */ void reinitbufbio(struct buf *bp) { struct bio *bio; for (bio = &bp->b_bio1; bio; bio = bio->bio_next) { bio->bio_done = NULL; bio->bio_offset = NOOFFSET; } } /* * Undo the effects of an initbufbio(). */ void uninitbufbio(struct buf *bp) { dsched_exit_buf(bp); BUF_LOCKFREE(bp); } /* * Push another BIO layer onto an existing BIO and return it. The new * BIO layer may already exist, holding cached translation data. */ struct bio * push_bio(struct bio *bio) { struct bio *nbio; if ((nbio = bio->bio_next) == NULL) { int index = bio - &bio->bio_buf->b_bio_array[0]; if (index >= NBUF_BIO - 1) { panic("push_bio: too many layers bp %p", bio->bio_buf); } nbio = &bio->bio_buf->b_bio_array[index + 1]; bio->bio_next = nbio; nbio->bio_prev = bio; nbio->bio_buf = bio->bio_buf; nbio->bio_offset = NOOFFSET; nbio->bio_done = NULL; nbio->bio_next = NULL; } KKASSERT(nbio->bio_done == NULL); return(nbio); } /* * Pop a BIO translation layer, returning the previous layer. The * must have been previously pushed. */ struct bio * pop_bio(struct bio *bio) { return(bio->bio_prev); } void clearbiocache(struct bio *bio) { while (bio) { bio->bio_offset = NOOFFSET; bio = bio->bio_next; } } /* * bfreekva: * * Free the KVA allocation for buffer 'bp'. * * Must be called from a critical section as this is the only locking for * buffer_map. * * Since this call frees up buffer space, we call bufspacewakeup(). */ static void bfreekva(struct buf *bp) { int count; if (bp->b_kvasize) { ++buffreekvacnt; count = vm_map_entry_reserve(MAP_RESERVE_COUNT); vm_map_lock(&buffer_map); bufspace -= bp->b_kvasize; vm_map_delete(&buffer_map, (vm_offset_t) bp->b_kvabase, (vm_offset_t) bp->b_kvabase + bp->b_kvasize, &count ); vm_map_unlock(&buffer_map); vm_map_entry_release(count); bp->b_kvasize = 0; bp->b_kvabase = NULL; bufspacewakeup(); } } /* * Remove the buffer from the appropriate free list. * (caller must be locked) */ static __inline void _bremfree(struct buf *bp) { struct bufpcpu *pcpu = &bufpcpu[bp->b_qcpu]; if (bp->b_qindex != BQUEUE_NONE) { KASSERT(BUF_REFCNTNB(bp) == 1, ("bremfree: bp %p not locked",bp)); TAILQ_REMOVE(&pcpu->bufqueues[bp->b_qindex], bp, b_freelist); bp->b_qindex = BQUEUE_NONE; } else { if (BUF_REFCNTNB(bp) <= 1) panic("bremfree: removing a buffer not on a queue"); } } /* * bremfree() - must be called with a locked buffer */ void bremfree(struct buf *bp) { struct bufpcpu *pcpu = &bufpcpu[bp->b_qcpu]; spin_lock(&pcpu->spin); _bremfree(bp); spin_unlock(&pcpu->spin); } /* * bremfree_locked - must be called with pcpu->spin locked */ static void bremfree_locked(struct buf *bp) { _bremfree(bp); } /* * This version of bread issues any required I/O asyncnronously and * makes a callback on completion. * * The callback must check whether BIO_DONE is set in the bio and issue * the bpdone(bp, 0) if it isn't. The callback is responsible for clearing * BIO_DONE and disposing of the I/O (bqrelse()ing it). */ void breadcb(struct vnode *vp, off_t loffset, int size, void (*func)(struct bio *), void *arg) { struct buf *bp; bp = getblk(vp, loffset, size, 0, 0); /* if not found in cache, do some I/O */ if ((bp->b_flags & B_CACHE) == 0) { bp->b_flags &= ~(B_ERROR | B_EINTR | B_INVAL); bp->b_cmd = BUF_CMD_READ; bp->b_bio1.bio_done = func; bp->b_bio1.bio_caller_info1.ptr = arg; vfs_busy_pages(vp, bp); BUF_KERNPROC(bp); vn_strategy(vp, &bp->b_bio1); } else if (func) { /* * Since we are issuing the callback synchronously it cannot * race the BIO_DONE, so no need for atomic ops here. */ /*bp->b_bio1.bio_done = func;*/ bp->b_bio1.bio_caller_info1.ptr = arg; bp->b_bio1.bio_flags |= BIO_DONE; func(&bp->b_bio1); } else { bqrelse(bp); } } /* * breadnx() - Terminal function for bread() and breadn(). * * This function will start asynchronous I/O on read-ahead blocks as well * as satisfy the primary request. * * We must clear B_ERROR and B_INVAL prior to initiating I/O. If B_CACHE is * set, the buffer is valid and we do not have to do anything. */ int breadnx(struct vnode *vp, off_t loffset, int size, off_t *raoffset, int *rabsize, int cnt, struct buf **bpp) { struct buf *bp, *rabp; int i; int rv = 0, readwait = 0; if (*bpp) bp = *bpp; else *bpp = bp = getblk(vp, loffset, size, 0, 0); /* if not found in cache, do some I/O */ if ((bp->b_flags & B_CACHE) == 0) { bp->b_flags &= ~(B_ERROR | B_EINTR | B_INVAL); bp->b_cmd = BUF_CMD_READ; bp->b_bio1.bio_done = biodone_sync; bp->b_bio1.bio_flags |= BIO_SYNC; vfs_busy_pages(vp, bp); vn_strategy(vp, &bp->b_bio1); ++readwait; } for (i = 0; i < cnt; i++, raoffset++, rabsize++) { if (inmem(vp, *raoffset)) continue; rabp = getblk(vp, *raoffset, *rabsize, 0, 0); if ((rabp->b_flags & B_CACHE) == 0) { rabp->b_flags &= ~(B_ERROR | B_EINTR | B_INVAL); rabp->b_cmd = BUF_CMD_READ; vfs_busy_pages(vp, rabp); BUF_KERNPROC(rabp); vn_strategy(vp, &rabp->b_bio1); } else { brelse(rabp); } } if (readwait) rv = biowait(&bp->b_bio1, "biord"); return (rv); } /* * bwrite: * * Synchronous write, waits for completion. * * Write, release buffer on completion. (Done by iodone * if async). Do not bother writing anything if the buffer * is invalid. * * Note that we set B_CACHE here, indicating that buffer is * fully valid and thus cacheable. This is true even of NFS * now so we set it generally. This could be set either here * or in biodone() since the I/O is synchronous. We put it * here. */ int bwrite(struct buf *bp) { int error; if (bp->b_flags & B_INVAL) { brelse(bp); return (0); } if (BUF_REFCNTNB(bp) == 0) panic("bwrite: buffer is not busy???"); /* Mark the buffer clean */ bundirty(bp); bp->b_flags &= ~(B_ERROR | B_EINTR); bp->b_flags |= B_CACHE; bp->b_cmd = BUF_CMD_WRITE; bp->b_bio1.bio_done = biodone_sync; bp->b_bio1.bio_flags |= BIO_SYNC; vfs_busy_pages(bp->b_vp, bp); /* * Normal bwrites pipeline writes. NOTE: b_bufsize is only * valid for vnode-backed buffers. */ bsetrunningbufspace(bp, bp->b_bufsize); vn_strategy(bp->b_vp, &bp->b_bio1); error = biowait(&bp->b_bio1, "biows"); brelse(bp); return (error); } /* * bawrite: * * Asynchronous write. Start output on a buffer, but do not wait for * it to complete. The buffer is released when the output completes. * * bwrite() ( or the VOP routine anyway ) is responsible for handling * B_INVAL buffers. Not us. */ void bawrite(struct buf *bp) { if (bp->b_flags & B_INVAL) { brelse(bp); return; } if (BUF_REFCNTNB(bp) == 0) panic("bwrite: buffer is not busy???"); /* Mark the buffer clean */ bundirty(bp); bp->b_flags &= ~(B_ERROR | B_EINTR); bp->b_flags |= B_CACHE; bp->b_cmd = BUF_CMD_WRITE; KKASSERT(bp->b_bio1.bio_done == NULL); vfs_busy_pages(bp->b_vp, bp); /* * Normal bwrites pipeline writes. NOTE: b_bufsize is only * valid for vnode-backed buffers. */ bsetrunningbufspace(bp, bp->b_bufsize); BUF_KERNPROC(bp); vn_strategy(bp->b_vp, &bp->b_bio1); } /* * bowrite: * * Ordered write. Start output on a buffer, and flag it so that the * device will write it in the order it was queued. The buffer is * released when the output completes. bwrite() ( or the VOP routine * anyway ) is responsible for handling B_INVAL buffers. */ int bowrite(struct buf *bp) { bp->b_flags |= B_ORDERED; bawrite(bp); return (0); } /* * bdwrite: * * Delayed write. (Buffer is marked dirty). Do not bother writing * anything if the buffer is marked invalid. * * Note that since the buffer must be completely valid, we can safely * set B_CACHE. In fact, we have to set B_CACHE here rather then in * biodone() in order to prevent getblk from writing the buffer * out synchronously. */ void bdwrite(struct buf *bp) { if (BUF_REFCNTNB(bp) == 0) panic("bdwrite: buffer is not busy"); if (bp->b_flags & B_INVAL) { brelse(bp); return; } bdirty(bp); if (dsched_is_clear_buf_priv(bp)) dsched_new_buf(bp); /* * Set B_CACHE, indicating that the buffer is fully valid. This is * true even of NFS now. */ bp->b_flags |= B_CACHE; /* * This bmap keeps the system from needing to do the bmap later, * perhaps when the system is attempting to do a sync. Since it * is likely that the indirect block -- or whatever other datastructure * that the filesystem needs is still in memory now, it is a good * thing to do this. Note also, that if the pageout daemon is * requesting a sync -- there might not be enough memory to do * the bmap then... So, this is important to do. */ if (bp->b_bio2.bio_offset == NOOFFSET) { VOP_BMAP(bp->b_vp, bp->b_loffset, &bp->b_bio2.bio_offset, NULL, NULL, BUF_CMD_WRITE); } /* * Because the underlying pages may still be mapped and * writable trying to set the dirty buffer (b_dirtyoff/end) * range here will be inaccurate. * * However, we must still clean the pages to satisfy the * vnode_pager and pageout daemon, so theythink the pages * have been "cleaned". What has really occured is that * they've been earmarked for later writing by the buffer * cache. * * So we get the b_dirtyoff/end update but will not actually * depend on it (NFS that is) until the pages are busied for * writing later on. */ vfs_clean_pages(bp); bqrelse(bp); /* * note: we cannot initiate I/O from a bdwrite even if we wanted to, * due to the softdep code. */ } /* * Fake write - return pages to VM system as dirty, leave the buffer clean. * This is used by tmpfs. * * It is important for any VFS using this routine to NOT use it for * IO_SYNC or IO_ASYNC operations which occur when the system really * wants to flush VM pages to backing store. */ void buwrite(struct buf *bp) { vm_page_t m; int i; /* * Only works for VMIO buffers. If the buffer is already * marked for delayed-write we can't avoid the bdwrite(). */ if ((bp->b_flags & B_VMIO) == 0 || (bp->b_flags & B_DELWRI)) { bdwrite(bp); return; } /* * Mark as needing a commit. */ for (i = 0; i < bp->b_xio.xio_npages; i++) { m = bp->b_xio.xio_pages[i]; vm_page_need_commit(m); } bqrelse(bp); } /* * bdirty: * * Turn buffer into delayed write request by marking it B_DELWRI. * B_RELBUF and B_NOCACHE must be cleared. * * We reassign the buffer to itself to properly update it in the * dirty/clean lists. * * Must be called from a critical section. * The buffer must be on BQUEUE_NONE. */ void bdirty(struct buf *bp) { KASSERT(bp->b_qindex == BQUEUE_NONE, ("bdirty: buffer %p still on queue %d", bp, bp->b_qindex)); if (bp->b_flags & B_NOCACHE) { kprintf("bdirty: clearing B_NOCACHE on buf %p\n", bp); bp->b_flags &= ~B_NOCACHE; } if (bp->b_flags & B_INVAL) { kprintf("bdirty: warning, dirtying invalid buffer %p\n", bp); } bp->b_flags &= ~B_RELBUF; if ((bp->b_flags & B_DELWRI) == 0) { lwkt_gettoken(&bp->b_vp->v_token); bp->b_flags |= B_DELWRI; reassignbuf(bp); lwkt_reltoken(&bp->b_vp->v_token); atomic_add_long(&dirtybufcount, 1); atomic_add_long(&dirtykvaspace, bp->b_kvasize); atomic_add_long(&dirtybufspace, bp->b_bufsize); if (bp->b_flags & B_HEAVY) { atomic_add_long(&dirtybufcounthw, 1); atomic_add_long(&dirtybufspacehw, bp->b_bufsize); } bd_heatup(); } } /* * Set B_HEAVY, indicating that this is a heavy-weight buffer that * needs to be flushed with a different buf_daemon thread to avoid * deadlocks. B_HEAVY also imposes restrictions in getnewbuf(). */ void bheavy(struct buf *bp) { if ((bp->b_flags & B_HEAVY) == 0) { bp->b_flags |= B_HEAVY; if (bp->b_flags & B_DELWRI) { atomic_add_long(&dirtybufcounthw, 1); atomic_add_long(&dirtybufspacehw, bp->b_bufsize); } } } /* * bundirty: * * Clear B_DELWRI for buffer. * * Must be called from a critical section. * * The buffer is typically on BQUEUE_NONE but there is one case in * brelse() that calls this function after placing the buffer on * a different queue. */ void bundirty(struct buf *bp) { if (bp->b_flags & B_DELWRI) { lwkt_gettoken(&bp->b_vp->v_token); bp->b_flags &= ~B_DELWRI; reassignbuf(bp); lwkt_reltoken(&bp->b_vp->v_token); atomic_add_long(&dirtybufcount, -1); atomic_add_long(&dirtykvaspace, -bp->b_kvasize); atomic_add_long(&dirtybufspace, -bp->b_bufsize); if (bp->b_flags & B_HEAVY) { atomic_add_long(&dirtybufcounthw, -1); atomic_add_long(&dirtybufspacehw, -bp->b_bufsize); } bd_signal(bp->b_bufsize); } /* * Since it is now being written, we can clear its deferred write flag. */ bp->b_flags &= ~B_DEFERRED; } /* * Set the b_runningbufspace field, used to track how much I/O is * in progress at any given moment. */ void bsetrunningbufspace(struct buf *bp, int bytes) { bp->b_runningbufspace = bytes; if (bytes) { atomic_add_long(&runningbufspace, bytes); atomic_add_long(&runningbufcount, 1); } } /* * brelse: * * Release a busy buffer and, if requested, free its resources. The * buffer will be stashed in the appropriate bufqueue[] allowing it * to be accessed later as a cache entity or reused for other purposes. */ void brelse(struct buf *bp) { struct bufpcpu *pcpu; #ifdef INVARIANTS int saved_flags = bp->b_flags; #endif KASSERT(!(bp->b_flags & (B_CLUSTER|B_PAGING)), ("brelse: inappropriate B_PAGING or B_CLUSTER bp %p", bp)); /* * If B_NOCACHE is set we are being asked to destroy the buffer and * its backing store. Clear B_DELWRI. * * B_NOCACHE is set in two cases: (1) when the caller really wants * to destroy the buffer and backing store and (2) when the caller * wants to destroy the buffer and backing store after a write * completes. */ if ((bp->b_flags & (B_NOCACHE|B_DELWRI)) == (B_NOCACHE|B_DELWRI)) { bundirty(bp); } if ((bp->b_flags & (B_INVAL | B_DELWRI)) == B_DELWRI) { /* * A re-dirtied buffer is only subject to destruction * by B_INVAL. B_ERROR and B_NOCACHE are ignored. */ /* leave buffer intact */ } else if ((bp->b_flags & (B_NOCACHE | B_INVAL | B_ERROR)) || (bp->b_bufsize <= 0)) { /* * Either a failed read or we were asked to free or not * cache the buffer. This path is reached with B_DELWRI * set only if B_INVAL is already set. B_NOCACHE governs * backing store destruction. * * NOTE: HAMMER will set B_LOCKED in buf_deallocate if the * buffer cannot be immediately freed. */ bp->b_flags |= B_INVAL; if (LIST_FIRST(&bp->b_dep) != NULL) buf_deallocate(bp); if (bp->b_flags & B_DELWRI) { atomic_add_long(&dirtybufcount, -1); atomic_add_long(&dirtykvaspace, -bp->b_kvasize); atomic_add_long(&dirtybufspace, -bp->b_bufsize); if (bp->b_flags & B_HEAVY) { atomic_add_long(&dirtybufcounthw, -1); atomic_add_long(&dirtybufspacehw, -bp->b_bufsize); } bd_signal(bp->b_bufsize); } bp->b_flags &= ~(B_DELWRI | B_CACHE); } /* * We must clear B_RELBUF if B_DELWRI or B_LOCKED is set, * or if b_refs is non-zero. * * If vfs_vmio_release() is called with either bit set, the * underlying pages may wind up getting freed causing a previous * write (bdwrite()) to get 'lost' because pages associated with * a B_DELWRI bp are marked clean. Pages associated with a * B_LOCKED buffer may be mapped by the filesystem. * * If we want to release the buffer ourselves (rather then the * originator asking us to release it), give the originator a * chance to countermand the release by setting B_LOCKED. * * We still allow the B_INVAL case to call vfs_vmio_release(), even * if B_DELWRI is set. * * If B_DELWRI is not set we may have to set B_RELBUF if we are low * on pages to return pages to the VM page queues. */ if ((bp->b_flags & (B_DELWRI | B_LOCKED)) || bp->b_refs) { bp->b_flags &= ~B_RELBUF; } else if (vm_page_count_min(0)) { if (LIST_FIRST(&bp->b_dep) != NULL) buf_deallocate(bp); /* can set B_LOCKED */ if (bp->b_flags & (B_DELWRI | B_LOCKED)) bp->b_flags &= ~B_RELBUF; else bp->b_flags |= B_RELBUF; } /* * Make sure b_cmd is clear. It may have already been cleared by * biodone(). * * At this point destroying the buffer is governed by the B_INVAL * or B_RELBUF flags. */ bp->b_cmd = BUF_CMD_DONE; dsched_exit_buf(bp); /* * VMIO buffer rundown. Make sure the VM page array is restored * after an I/O may have replaces some of the pages with bogus pages * in order to not destroy dirty pages in a fill-in read. * * Note that due to the code above, if a buffer is marked B_DELWRI * then the B_RELBUF and B_NOCACHE bits will always be clear. * B_INVAL may still be set, however. * * For clean buffers, B_INVAL or B_RELBUF will destroy the buffer * but not the backing store. B_NOCACHE will destroy the backing * store. * * Note that dirty NFS buffers contain byte-granular write ranges * and should not be destroyed w/ B_INVAL even if the backing store * is left intact. */ if (bp->b_flags & B_VMIO) { /* * Rundown for VMIO buffers which are not dirty NFS buffers. */ int i, j, resid; vm_page_t m; off_t foff; vm_pindex_t poff; vm_object_t obj; struct vnode *vp; vp = bp->b_vp; /* * Get the base offset and length of the buffer. Note that * in the VMIO case if the buffer block size is not * page-aligned then b_data pointer may not be page-aligned. * But our b_xio.xio_pages array *IS* page aligned. * * block sizes less then DEV_BSIZE (usually 512) are not * supported due to the page granularity bits (m->valid, * m->dirty, etc...). * * See man buf(9) for more information */ resid = bp->b_bufsize; foff = bp->b_loffset; for (i = 0; i < bp->b_xio.xio_npages; i++) { m = bp->b_xio.xio_pages[i]; vm_page_flag_clear(m, PG_ZERO); /* * If we hit a bogus page, fixup *all* of them * now. Note that we left these pages wired * when we removed them so they had better exist, * and they cannot be ripped out from under us so * no critical section protection is necessary. */ if (m == bogus_page) { obj = vp->v_object; poff = OFF_TO_IDX(bp->b_loffset); vm_object_hold(obj); for (j = i; j < bp->b_xio.xio_npages; j++) { vm_page_t mtmp; mtmp = bp->b_xio.xio_pages[j]; if (mtmp == bogus_page) { mtmp = vm_page_lookup(obj, poff + j); if (!mtmp) { panic("brelse: page missing"); } bp->b_xio.xio_pages[j] = mtmp; } } bp->b_flags &= ~B_HASBOGUS; vm_object_drop(obj); if ((bp->b_flags & B_INVAL) == 0) { pmap_qenter(trunc_page((vm_offset_t)bp->b_data), bp->b_xio.xio_pages, bp->b_xio.xio_npages); } m = bp->b_xio.xio_pages[i]; } /* * Invalidate the backing store if B_NOCACHE is set * (e.g. used with vinvalbuf()). If this is NFS * we impose a requirement that the block size be * a multiple of PAGE_SIZE and create a temporary * hack to basically invalidate the whole page. The * problem is that NFS uses really odd buffer sizes * especially when tracking piecemeal writes and * it also vinvalbuf()'s a lot, which would result * in only partial page validation and invalidation * here. If the file page is mmap()'d, however, * all the valid bits get set so after we invalidate * here we would end up with weird m->valid values * like 0xfc. nfs_getpages() can't handle this so * we clear all the valid bits for the NFS case * instead of just some of them. * * The real bug is the VM system having to set m->valid * to VM_PAGE_BITS_ALL for faulted-in pages, which * itself is an artifact of the whole 512-byte * granular mess that exists to support odd block * sizes and UFS meta-data block sizes (e.g. 6144). * A complete rewrite is required. * * XXX */ if (bp->b_flags & (B_NOCACHE|B_ERROR)) { int poffset = foff & PAGE_MASK; int presid; presid = PAGE_SIZE - poffset; if (bp->b_vp->v_tag == VT_NFS && bp->b_vp->v_type == VREG) { ; /* entire page */ } else if (presid > resid) { presid = resid; } KASSERT(presid >= 0, ("brelse: extra page")); vm_page_set_invalid(m, poffset, presid); /* * Also make sure any swap cache is removed * as it is now stale (HAMMER in particular * uses B_NOCACHE to deal with buffer * aliasing). */ swap_pager_unswapped(m); } resid -= PAGE_SIZE - (foff & PAGE_MASK); foff = (foff + PAGE_SIZE) & ~(off_t)PAGE_MASK; } if (bp->b_flags & (B_INVAL | B_RELBUF)) vfs_vmio_release(bp); } else { /* * Rundown for non-VMIO buffers. */ if (bp->b_flags & (B_INVAL | B_RELBUF)) { if (bp->b_bufsize) allocbuf(bp, 0); KKASSERT (LIST_FIRST(&bp->b_dep) == NULL); if (bp->b_vp) brelvp(bp); } } if (bp->b_qindex != BQUEUE_NONE) panic("brelse: free buffer onto another queue???"); if (BUF_REFCNTNB(bp) > 1) { /* Temporary panic to verify exclusive locking */ /* This panic goes away when we allow shared refs */ panic("brelse: multiple refs"); /* NOT REACHED */ return; } /* * Figure out the correct queue to place the cleaned up buffer on. * Buffers placed in the EMPTY or EMPTYKVA had better already be * disassociated from their vnode. * * Return the buffer to its original pcpu area */ pcpu = &bufpcpu[bp->b_qcpu]; spin_lock(&pcpu->spin); if (bp->b_flags & B_LOCKED) { /* * Buffers that are locked are placed in the locked queue * immediately, regardless of their state. */ bp->b_qindex = BQUEUE_LOCKED; TAILQ_INSERT_TAIL(&pcpu->bufqueues[bp->b_qindex], bp, b_freelist); } else if (bp->b_bufsize == 0) { /* * Buffers with no memory. Due to conditionals near the top * of brelse() such buffers should probably already be * marked B_INVAL and disassociated from their vnode. */ bp->b_flags |= B_INVAL; KASSERT(bp->b_vp == NULL, ("bp1 %p flags %08x/%08x vnode %p " "unexpectededly still associated!", bp, saved_flags, bp->b_flags, bp->b_vp)); KKASSERT((bp->b_flags & B_HASHED) == 0); if (bp->b_kvasize) { bp->b_qindex = BQUEUE_EMPTYKVA; } else { bp->b_qindex = BQUEUE_EMPTY; } TAILQ_INSERT_HEAD(&pcpu->bufqueues[bp->b_qindex], bp, b_freelist); } else if (bp->b_flags & (B_INVAL | B_NOCACHE | B_RELBUF)) { /* * Buffers with junk contents. Again these buffers had better * already be disassociated from their vnode. */ KASSERT(bp->b_vp == NULL, ("bp2 %p flags %08x/%08x vnode %p unexpectededly " "still associated!", bp, saved_flags, bp->b_flags, bp->b_vp)); KKASSERT((bp->b_flags & B_HASHED) == 0); bp->b_flags |= B_INVAL; bp->b_qindex = BQUEUE_CLEAN; TAILQ_INSERT_HEAD(&pcpu->bufqueues[bp->b_qindex], bp, b_freelist); } else { /* * Remaining buffers. These buffers are still associated with * their vnode. */ switch(bp->b_flags & (B_DELWRI|B_HEAVY)) { case B_DELWRI: bp->b_qindex = BQUEUE_DIRTY; TAILQ_INSERT_TAIL(&pcpu->bufqueues[bp->b_qindex], bp, b_freelist); break; case B_DELWRI | B_HEAVY: bp->b_qindex = BQUEUE_DIRTY_HW; TAILQ_INSERT_TAIL(&pcpu->bufqueues[bp->b_qindex], bp, b_freelist); break; default: /* * NOTE: Buffers are always placed at the end of the * queue. If B_AGE is not set the buffer will cycle * through the queue twice. */ bp->b_qindex = BQUEUE_CLEAN; TAILQ_INSERT_TAIL(&pcpu->bufqueues[bp->b_qindex], bp, b_freelist); break; } } spin_unlock(&pcpu->spin); /* * If B_INVAL, clear B_DELWRI. We've already placed the buffer * on the correct queue but we have not yet unlocked it. */ if ((bp->b_flags & (B_INVAL|B_DELWRI)) == (B_INVAL|B_DELWRI)) bundirty(bp); /* * The bp is on an appropriate queue unless locked. If it is not * locked or dirty we can wakeup threads waiting for buffer space. * * We've already handled the B_INVAL case ( B_DELWRI will be clear * if B_INVAL is set ). */ if ((bp->b_flags & (B_LOCKED|B_DELWRI)) == 0) bufcountwakeup(); /* * Something we can maybe free or reuse */ if (bp->b_bufsize || bp->b_kvasize) bufspacewakeup(); /* * Clean up temporary flags and unlock the buffer. */ bp->b_flags &= ~(B_ORDERED | B_NOCACHE | B_RELBUF | B_DIRECT); BUF_UNLOCK(bp); } /* * bqrelse: * * Release a buffer back to the appropriate queue but do not try to free * it. The buffer is expected to be used again soon. * * bqrelse() is used by bdwrite() to requeue a delayed write, and used by * biodone() to requeue an async I/O on completion. It is also used when * known good buffers need to be requeued but we think we may need the data * again soon. * * XXX we should be able to leave the B_RELBUF hint set on completion. */ void bqrelse(struct buf *bp) { struct bufpcpu *pcpu; KASSERT(!(bp->b_flags & (B_CLUSTER|B_PAGING)), ("bqrelse: inappropriate B_PAGING or B_CLUSTER bp %p", bp)); if (bp->b_qindex != BQUEUE_NONE) panic("bqrelse: free buffer onto another queue???"); if (BUF_REFCNTNB(bp) > 1) { /* do not release to free list */ panic("bqrelse: multiple refs"); return; } buf_act_advance(bp); pcpu = &bufpcpu[bp->b_qcpu]; spin_lock(&pcpu->spin); if (bp->b_flags & B_LOCKED) { /* * Locked buffers are released to the locked queue. However, * if the buffer is dirty it will first go into the dirty * queue and later on after the I/O completes successfully it * will be released to the locked queue. */ bp->b_qindex = BQUEUE_LOCKED; TAILQ_INSERT_TAIL(&pcpu->bufqueues[bp->b_qindex], bp, b_freelist); } else if (bp->b_flags & B_DELWRI) { bp->b_qindex = (bp->b_flags & B_HEAVY) ? BQUEUE_DIRTY_HW : BQUEUE_DIRTY; TAILQ_INSERT_TAIL(&pcpu->bufqueues[bp->b_qindex], bp, b_freelist); } else if (vm_page_count_min(0)) { /* * We are too low on memory, we have to try to free the * buffer (most importantly: the wired pages making up its * backing store) *now*. */ spin_unlock(&pcpu->spin); brelse(bp); return; } else { bp->b_qindex = BQUEUE_CLEAN; TAILQ_INSERT_TAIL(&pcpu->bufqueues[bp->b_qindex], bp, b_freelist); } spin_unlock(&pcpu->spin); /* * We have now placed the buffer on the proper queue, but have yet * to unlock it. */ if ((bp->b_flags & B_LOCKED) == 0 && ((bp->b_flags & B_INVAL) || (bp->b_flags & B_DELWRI) == 0)) { bufcountwakeup(); } /* * Something we can maybe free or reuse. */ if (bp->b_bufsize && !(bp->b_flags & B_DELWRI)) bufspacewakeup(); /* * Final cleanup and unlock. Clear bits that are only used while a * buffer is actively locked. */ bp->b_flags &= ~(B_ORDERED | B_NOCACHE | B_RELBUF); dsched_exit_buf(bp); BUF_UNLOCK(bp); } /* * Hold a buffer, preventing it from being reused. This will prevent * normal B_RELBUF operations on the buffer but will not prevent B_INVAL * operations. If a B_INVAL operation occurs the buffer will remain held * but the underlying pages may get ripped out. * * These functions are typically used in VOP_READ/VOP_WRITE functions * to hold a buffer during a copyin or copyout, preventing deadlocks * or recursive lock panics when read()/write() is used over mmap()'d * space. * * NOTE: bqhold() requires that the buffer be locked at the time of the * hold. bqdrop() has no requirements other than the buffer having * previously been held. */ void bqhold(struct buf *bp) { atomic_add_int(&bp->b_refs, 1); } void bqdrop(struct buf *bp) { KKASSERT(bp->b_refs > 0); atomic_add_int(&bp->b_refs, -1); } /* * Return backing pages held by the buffer 'bp' back to the VM system. * This routine is called when the bp is invalidated, released, or * reused. * * The KVA mapping (b_data) for the underlying pages is removed by * this function. * * WARNING! This routine is integral to the low memory critical path * when a buffer is B_RELBUF'd. If the system has a severe page * deficit we need to get the page(s) onto the PQ_FREE or PQ_CACHE * queues so they can be reused in the current pageout daemon * pass. */ static void vfs_vmio_release(struct buf *bp) { int i; vm_page_t m; for (i = 0; i < bp->b_xio.xio_npages; i++) { m = bp->b_xio.xio_pages[i]; bp->b_xio.xio_pages[i] = NULL; /* * We need to own the page in order to safely unwire it. */ vm_page_busy_wait(m, FALSE, "vmiopg"); /* * The VFS is telling us this is not a meta-data buffer * even if it is backed by a block device. */ if (bp->b_flags & B_NOTMETA) vm_page_flag_set(m, PG_NOTMETA); /* * This is a very important bit of code. We try to track * VM page use whether the pages are wired into the buffer * cache or not. While wired into the buffer cache the * bp tracks the act_count. * * We can choose to place unwired pages on the inactive * queue (0) or active queue (1). If we place too many * on the active queue the queue will cycle the act_count * on pages we'd like to keep, just from single-use pages * (such as when doing a tar-up or file scan). */ if (bp->b_act_count < vm_cycle_point) vm_page_unwire(m, 0); else vm_page_unwire(m, 1); /* * If the wire_count has dropped to 0 we may need to take * further action before unbusying the page. * * WARNING: vm_page_try_*() also checks PG_NEED_COMMIT for us. */ if (m->wire_count == 0) { vm_page_flag_clear(m, PG_ZERO); if (bp->b_flags & B_DIRECT) { /* * Attempt to free the page if B_DIRECT is * set, the caller does not desire the page * to be cached. */ vm_page_wakeup(m); vm_page_try_to_free(m); } else if ((bp->b_flags & B_NOTMETA) || vm_page_count_min(0)) { /* * Attempt to move the page to PQ_CACHE * if B_NOTMETA is set. This flag is set * by HAMMER to remove one of the two pages * present when double buffering is enabled. * * Attempt to move the page to PQ_CACHE * If we have a severe page deficit. This * will cause buffer cache operations related * to pageouts to recycle the related pages * in order to avoid a low memory deadlock. */ m->act_count = bp->b_act_count; vm_page_wakeup(m); vm_page_try_to_cache(m); } else { /* * Nominal case, leave the page on the * queue the original unwiring placed it on * (active or inactive). */ m->act_count = bp->b_act_count; vm_page_wakeup(m); } } else { vm_page_wakeup(m); } } pmap_qremove(trunc_page((vm_offset_t) bp->b_data), bp->b_xio.xio_npages); if (bp->b_bufsize) { bufspacewakeup(); bp->b_bufsize = 0; } bp->b_xio.xio_npages = 0; bp->b_flags &= ~B_VMIO; KKASSERT (LIST_FIRST(&bp->b_dep) == NULL); if (bp->b_vp) brelvp(bp); } /* * Find and initialize a new buffer header, freeing up existing buffers * in the bufqueues as necessary. The new buffer is returned locked. * * Important: B_INVAL is not set. If the caller wishes to throw the * buffer away, the caller must set B_INVAL prior to calling brelse(). * * We block if: * We have insufficient buffer headers * We have insufficient buffer space * buffer_map is too fragmented ( space reservation fails ) * If we have to flush dirty buffers ( but we try to avoid this ) * * To avoid VFS layer recursion we do not flush dirty buffers ourselves. * Instead we ask the buf daemon to do it for us. We attempt to * avoid piecemeal wakeups of the pageout daemon. */ struct buf * getnewbuf(int blkflags, int slptimeo, int size, int maxsize) { struct bufpcpu *pcpu; struct buf *bp; struct buf *nbp; int defrag = 0; int nqindex; int nqcpu; int slpflags = (blkflags & GETBLK_PCATCH) ? PCATCH : 0; int maxloops = 200000; int restart_reason = 0; struct buf *restart_bp = NULL; static int flushingbufs; /* * We can't afford to block since we might be holding a vnode lock, * which may prevent system daemons from running. We deal with * low-memory situations by proactively returning memory and running * async I/O rather then sync I/O. */ ++getnewbufcalls; --getnewbufrestarts; nqcpu = mycpu->gd_cpuid; restart: ++getnewbufrestarts; if (debug_bufbio && --maxloops == 0) panic("getnewbuf, excessive loops on cpu %d restart %d (%p)", mycpu->gd_cpuid, restart_reason, restart_bp); /* * Setup for scan. If we do not have enough free buffers, * we setup a degenerate case that immediately fails. Note * that if we are specially marked process, we are allowed to * dip into our reserves. * * The scanning sequence is nominally: EMPTY->EMPTYKVA->CLEAN * * We start with EMPTYKVA. If the list is empty we backup to EMPTY. * However, there are a number of cases (defragging, reusing, ...) * where we cannot backup. */ pcpu = &bufpcpu[nqcpu]; nqindex = BQUEUE_EMPTYKVA; spin_lock(&pcpu->spin); nbp = TAILQ_FIRST(&pcpu->bufqueues[BQUEUE_EMPTYKVA]); if (nbp == NULL) { /* * If no EMPTYKVA buffers and we are either * defragging or reusing, locate a CLEAN buffer * to free or reuse. If bufspace useage is low * skip this step so we can allocate a new buffer. */ if (defrag || bufspace >= lobufspace) { nqindex = BQUEUE_CLEAN; nbp = TAILQ_FIRST(&pcpu->bufqueues[BQUEUE_CLEAN]); } /* * If we could not find or were not allowed to reuse a * CLEAN buffer, check to see if it is ok to use an EMPTY * buffer. We can only use an EMPTY buffer if allocating * its KVA would not otherwise run us out of buffer space. */ if (nbp == NULL && defrag == 0 && bufspace + maxsize < hibufspace) { nqindex = BQUEUE_EMPTY; nbp = TAILQ_FIRST(&pcpu->bufqueues[BQUEUE_EMPTY]); } } /* * Run scan, possibly freeing data and/or kva mappings on the fly * depending. * * WARNING! spin is held! */ while ((bp = nbp) != NULL) { int qindex = nqindex; nbp = TAILQ_NEXT(bp, b_freelist); /* * BQUEUE_CLEAN - B_AGE special case. If not set the bp * cycles through the queue twice before being selected. */ if (qindex == BQUEUE_CLEAN && (bp->b_flags & B_AGE) == 0 && nbp) { bp->b_flags |= B_AGE; TAILQ_REMOVE(&pcpu->bufqueues[qindex], bp, b_freelist); TAILQ_INSERT_TAIL(&pcpu->bufqueues[qindex], bp, b_freelist); continue; } /* * Calculate next bp ( we can only use it if we do not block * or do other fancy things ). */ if (nbp == NULL) { switch(qindex) { case BQUEUE_EMPTY: nqindex = BQUEUE_EMPTYKVA; if ((nbp = TAILQ_FIRST(&pcpu->bufqueues[BQUEUE_EMPTYKVA]))) break; /* fall through */ case BQUEUE_EMPTYKVA: nqindex = BQUEUE_CLEAN; if ((nbp = TAILQ_FIRST(&pcpu->bufqueues[BQUEUE_CLEAN]))) break; /* fall through */ case BQUEUE_CLEAN: /* * nbp is NULL. */ break; } } /* * Sanity Checks */ KASSERT(bp->b_qindex == qindex, ("getnewbuf: inconsistent queue %d bp %p", qindex, bp)); /* * Note: we no longer distinguish between VMIO and non-VMIO * buffers. */ KASSERT((bp->b_flags & B_DELWRI) == 0, ("delwri buffer %p found in queue %d", bp, qindex)); /* * Do not try to reuse a buffer with a non-zero b_refs. * This is an unsynchronized test. A synchronized test * is also performed after we lock the buffer. */ if (bp->b_refs) continue; /* * If we are defragging then we need a buffer with * b_kvasize != 0. XXX this situation should no longer * occur, if defrag is non-zero the buffer's b_kvasize * should also be non-zero at this point. XXX */ if (defrag && bp->b_kvasize == 0) { kprintf("Warning: defrag empty buffer %p\n", bp); continue; } /* * Start freeing the bp. This is somewhat involved. nbp * remains valid only for BQUEUE_EMPTY[KVA] bp's. Buffers * on the clean list must be disassociated from their * current vnode. Buffers on the empty[kva] lists have * already been disassociated. * * b_refs is checked after locking along with queue changes. * We must check here to deal with zero->nonzero transitions * made by the owner of the buffer lock, which is used by * VFS's to hold the buffer while issuing an unlocked * uiomove()s. We cannot invalidate the buffer's pages * for this case. Once we successfully lock a buffer the * only 0->1 transitions of b_refs will occur via findblk(). * * We must also check for queue changes after successful * locking as the current lock holder may dispose of the * buffer and change its queue. */ if (BUF_LOCK(bp, LK_EXCLUSIVE | LK_NOWAIT) != 0) { spin_unlock(&pcpu->spin); tsleep(&bd_request, 0, "gnbxxx", (hz + 99) / 100); restart_reason = 1; restart_bp = bp; goto restart; } if (bp->b_qindex != qindex || bp->b_refs) { spin_unlock(&pcpu->spin); BUF_UNLOCK(bp); restart_reason = 2; restart_bp = bp; goto restart; } bremfree_locked(bp); spin_unlock(&pcpu->spin); /* * Dependancies must be handled before we disassociate the * vnode. * * NOTE: HAMMER will set B_LOCKED if the buffer cannot * be immediately disassociated. HAMMER then becomes * responsible for releasing the buffer. * * NOTE: spin is UNLOCKED now. */ if (LIST_FIRST(&bp->b_dep) != NULL) { buf_deallocate(bp); if (bp->b_flags & B_LOCKED) { bqrelse(bp); restart_reason = 3; restart_bp = bp; goto restart; } KKASSERT(LIST_FIRST(&bp->b_dep) == NULL); } if (qindex == BQUEUE_CLEAN) { if (bp->b_flags & B_VMIO) vfs_vmio_release(bp); if (bp->b_vp) brelvp(bp); } /* * NOTE: nbp is now entirely invalid. We can only restart * the scan from this point on. * * Get the rest of the buffer freed up. b_kva* is still * valid after this operation. */ KASSERT(bp->b_vp == NULL, ("bp3 %p flags %08x vnode %p qindex %d " "unexpectededly still associated!", bp, bp->b_flags, bp->b_vp, qindex)); KKASSERT((bp->b_flags & B_HASHED) == 0); /* * critical section protection is not required when * scrapping a buffer's contents because it is already * wired. */ if (bp->b_bufsize) allocbuf(bp, 0); if (bp->b_flags & (B_VNDIRTY | B_VNCLEAN | B_HASHED)) { kprintf("getnewbuf: caught bug vp queue " "%p/%08x qidx %d\n", bp, bp->b_flags, qindex); brelvp(bp); } bp->b_flags = B_BNOCLIP; bp->b_cmd = BUF_CMD_DONE; bp->b_vp = NULL; bp->b_error = 0; bp->b_resid = 0; bp->b_bcount = 0; bp->b_xio.xio_npages = 0; bp->b_dirtyoff = bp->b_dirtyend = 0; bp->b_act_count = ACT_INIT; reinitbufbio(bp); KKASSERT(LIST_FIRST(&bp->b_dep) == NULL); buf_dep_init(bp); if (blkflags & GETBLK_BHEAVY) bp->b_flags |= B_HEAVY; /* * If we are defragging then free the buffer. */ if (defrag) { bp->b_flags |= B_INVAL; bfreekva(bp); brelse(bp); defrag = 0; restart_reason = 4; restart_bp = bp; goto restart; } /* * If we are overcomitted then recover the buffer and its * KVM space. This occurs in rare situations when multiple * processes are blocked in getnewbuf() or allocbuf(). * * On 64-bit systems BKVASIZE == MAXBSIZE and overcommit * should not be possible. */ if (bufspace >= hibufspace) flushingbufs = 1; if (BKVASIZE != MAXBSIZE) { if (flushingbufs && bp->b_kvasize != 0) { bp->b_flags |= B_INVAL; bfreekva(bp); brelse(bp); restart_reason = 5; restart_bp = bp; goto restart; } } if (bufspace < lobufspace) flushingbufs = 0; /* * b_refs can transition to a non-zero value while we hold * the buffer locked due to a findblk(). Our brelvp() above * interlocked any future possible transitions due to * findblk()s. * * If we find b_refs to be non-zero we can destroy the * buffer's contents but we cannot yet reuse the buffer. */ if (bp->b_refs) { bp->b_flags |= B_INVAL; if (BKVASIZE != MAXBSIZE) bfreekva(bp); brelse(bp); restart_reason = 6; restart_bp = bp; goto restart; } break; /* NOT REACHED, spin not held */ } /* * If we exhausted our list, iterate other cpus. If that fails, * sleep as appropriate. We may have to wakeup various daemons * and write out some dirty buffers. * * Generally we are sleeping due to insufficient buffer space. * * NOTE: spin is held if bp is NULL, else it is not held. */ if (bp == NULL) { int flags; char *waitmsg; spin_unlock(&pcpu->spin); nqcpu = (nqcpu + 1) % ncpus; if (nqcpu != mycpu->gd_cpuid) { restart_reason = 7; restart_bp = bp; goto restart; } if (defrag) { flags = VFS_BIO_NEED_BUFSPACE; waitmsg = "nbufkv"; } else if (bufspace >= hibufspace) { waitmsg = "nbufbs"; flags = VFS_BIO_NEED_BUFSPACE; } else { waitmsg = "newbuf"; flags = VFS_BIO_NEED_ANY; } bd_speedup(); /* heeeelp */ atomic_set_int(&needsbuffer, flags); while (needsbuffer & flags) { int value; tsleep_interlock(&needsbuffer, 0); value = atomic_fetchadd_int(&needsbuffer, 0); if (value & flags) { if (tsleep(&needsbuffer, PINTERLOCKED|slpflags, waitmsg, slptimeo)) { return (NULL); } } } } else { /* * We finally have a valid bp. We aren't quite out of the * woods, we still have to reserve kva space. In order * to keep fragmentation sane we only allocate kva in * BKVASIZE chunks. * * (spin is not held) */ maxsize = (maxsize + BKVAMASK) & ~BKVAMASK; if (maxsize != bp->b_kvasize) { vm_offset_t addr = 0; int count; bfreekva(bp); count = vm_map_entry_reserve(MAP_RESERVE_COUNT); vm_map_lock(&buffer_map); if (vm_map_findspace(&buffer_map, vm_map_min(&buffer_map), maxsize, maxsize, 0, &addr)) { /* * Uh oh. Buffer map is too fragmented. We * must defragment the map. */ vm_map_unlock(&buffer_map); vm_map_entry_release(count); ++bufdefragcnt; defrag = 1; bp->b_flags |= B_INVAL; brelse(bp); restart_reason = 8; restart_bp = bp; goto restart; } if (addr) { vm_map_insert(&buffer_map, &count, NULL, NULL, 0, addr, addr + maxsize, VM_MAPTYPE_NORMAL, VM_PROT_ALL, VM_PROT_ALL, MAP_NOFAULT); bp->b_kvabase = (caddr_t) addr; bp->b_kvasize = maxsize; bufspace += bp->b_kvasize; ++bufreusecnt; } vm_map_unlock(&buffer_map); vm_map_entry_release(count); } bp->b_data = bp->b_kvabase; } return(bp); } /* * buf_daemon: * * Buffer flushing daemon. Buffers are normally flushed by the * update daemon but if it cannot keep up this process starts to * take the load in an attempt to prevent getnewbuf() from blocking. * * Once a flush is initiated it does not stop until the number * of buffers falls below lodirtybuffers, but we will wake up anyone * waiting at the mid-point. */ static struct kproc_desc buf_kp = { "bufdaemon", buf_daemon, &bufdaemon_td }; SYSINIT(bufdaemon, SI_SUB_KTHREAD_BUF, SI_ORDER_FIRST, kproc_start, &buf_kp) static struct kproc_desc bufhw_kp = { "bufdaemon_hw", buf_daemon_hw, &bufdaemonhw_td }; SYSINIT(bufdaemon_hw, SI_SUB_KTHREAD_BUF, SI_ORDER_FIRST, kproc_start, &bufhw_kp) static void buf_daemon1(struct thread *td, int queue, int (*buf_limit_fn)(long), int *bd_req) { long limit; struct buf *marker; marker = kmalloc(sizeof(*marker), M_BIOBUF, M_WAITOK | M_ZERO); marker->b_flags |= B_MARKER; marker->b_qindex = BQUEUE_NONE; marker->b_qcpu = 0; /* * This process needs to be suspended prior to shutdown sync. */ EVENTHANDLER_REGISTER(shutdown_pre_sync, shutdown_kproc, td, SHUTDOWN_PRI_LAST); curthread->td_flags |= TDF_SYSTHREAD; /* * This process is allowed to take the buffer cache to the limit */ for (;;) { kproc_suspend_loop(); /* * Do the flush as long as the number of dirty buffers * (including those running) exceeds lodirtybufspace. * * When flushing limit running I/O to hirunningspace * Do the flush. Limit the amount of in-transit I/O we * allow to build up, otherwise we would completely saturate * the I/O system. Wakeup any waiting processes before we * normally would so they can run in parallel with our drain. * * Our aggregate normal+HW lo water mark is lodirtybufspace, * but because we split the operation into two threads we * have to cut it in half for each thread. */ waitrunningbufspace(); limit = lodirtybufspace / 2; while (buf_limit_fn(limit)) { if (flushbufqueues(marker, queue) == 0) break; if (runningbufspace < hirunningspace) continue; waitrunningbufspace(); } /* * We reached our low water mark, reset the * request and sleep until we are needed again. * The sleep is just so the suspend code works. */ tsleep_interlock(bd_req, 0); if (atomic_swap_int(bd_req, 0) == 0) tsleep(bd_req, PINTERLOCKED, "psleep", hz); } /* NOT REACHED */ /*kfree(marker, M_BIOBUF);*/ } static int buf_daemon_limit(long limit) { return (runningbufspace + dirtykvaspace > limit || dirtybufcount - dirtybufcounthw >= nbuf / 2); } static int buf_daemon_hw_limit(long limit) { return (runningbufspace + dirtykvaspace > limit || dirtybufcounthw >= nbuf / 2); } static void buf_daemon(void) { buf_daemon1(bufdaemon_td, BQUEUE_DIRTY, buf_daemon_limit, &bd_request); } static void buf_daemon_hw(void) { buf_daemon1(bufdaemonhw_td, BQUEUE_DIRTY_HW, buf_daemon_hw_limit, &bd_request_hw); } /* * flushbufqueues: * * Try to flush a buffer in the dirty queue. We must be careful to * free up B_INVAL buffers instead of write them, which NFS is * particularly sensitive to. * * B_RELBUF may only be set by VFSs. We do set B_AGE to indicate * that we really want to try to get the buffer out and reuse it * due to the write load on the machine. * * We must lock the buffer in order to check its validity before we * can mess with its contents. spin isn't enough. */ static int flushbufqueues(struct buf *marker, bufq_type_t q) { struct bufpcpu *pcpu; struct buf *bp; int r = 0; int lcpu = marker->b_qcpu; KKASSERT(marker->b_qindex == BQUEUE_NONE); KKASSERT(marker->b_flags & B_MARKER); again: /* * Spinlock needed to perform operations on the queue and may be * held through a non-blocking BUF_LOCK(), but cannot be held when * BUF_UNLOCK()ing or through any other major operation. */ pcpu = &bufpcpu[marker->b_qcpu]; spin_lock(&pcpu->spin); marker->b_qindex = q; TAILQ_INSERT_HEAD(&pcpu->bufqueues[q], marker, b_freelist); bp = marker; while ((bp = TAILQ_NEXT(bp, b_freelist)) != NULL) { /* * NOTE: spinlock is always held at the top of the loop */ if (bp->b_flags & B_MARKER) continue; if ((bp->b_flags & B_DELWRI) == 0) { kprintf("Unexpected clean buffer %p\n", bp); continue; } if (BUF_LOCK(bp, LK_EXCLUSIVE | LK_NOWAIT)) continue; KKASSERT(bp->b_qcpu == marker->b_qcpu && bp->b_qindex == q); /* * Once the buffer is locked we will have no choice but to * unlock the spinlock around a later BUF_UNLOCK and re-set * bp = marker when looping. Move the marker now to make * things easier. */ TAILQ_REMOVE(&pcpu->bufqueues[q], marker, b_freelist); TAILQ_INSERT_AFTER(&pcpu->bufqueues[q], bp, marker, b_freelist); /* * Must recheck B_DELWRI after successfully locking * the buffer. */ if ((bp->b_flags & B_DELWRI) == 0) { spin_unlock(&pcpu->spin); BUF_UNLOCK(bp); spin_lock(&pcpu->spin); bp = marker; continue; } /* * Remove the buffer from its queue. We still own the * spinlock here. */ _bremfree(bp); /* * Disposing of an invalid buffer counts as a flush op */ if (bp->b_flags & B_INVAL) { spin_unlock(&pcpu->spin); brelse(bp); spin_lock(&pcpu->spin); ++r; break; } /* * Release the spinlock for the more complex ops we * are now going to do. */ spin_unlock(&pcpu->spin); lwkt_yield(); /* * This is a bit messy */ if (LIST_FIRST(&bp->b_dep) != NULL && (bp->b_flags & B_DEFERRED) == 0 && buf_countdeps(bp, 0)) { spin_lock(&pcpu->spin); TAILQ_INSERT_TAIL(&pcpu->bufqueues[q], bp, b_freelist); bp->b_qindex = q; bp->b_flags |= B_DEFERRED; spin_unlock(&pcpu->spin); BUF_UNLOCK(bp); spin_lock(&pcpu->spin); bp = marker; continue; } /* * spinlock not held here. * * If the buffer has a dependancy, buf_checkwrite() must * also return 0 for us to be able to initate the write. * * If the buffer is flagged B_ERROR it may be requeued * over and over again, we try to avoid a live lock. */ if (LIST_FIRST(&bp->b_dep) != NULL && buf_checkwrite(bp)) { brelse(bp); } else if (bp->b_flags & B_ERROR) { tsleep(bp, 0, "bioer", 1); bp->b_flags &= ~B_AGE; cluster_awrite(bp); } else { bp->b_flags |= B_AGE; cluster_awrite(bp); } spin_lock(&pcpu->spin); ++r; break; } TAILQ_REMOVE(&pcpu->bufqueues[q], marker, b_freelist); marker->b_qindex = BQUEUE_NONE; spin_unlock(&pcpu->spin); /* * Advance the marker to be fair. */ marker->b_qcpu = (marker->b_qcpu + 1) % ncpus; if (bp == NULL) { if (marker->b_qcpu != lcpu) goto again; } return (r); } /* * inmem: * * Returns true if no I/O is needed to access the associated VM object. * This is like findblk except it also hunts around in the VM system for * the data. * * Note that we ignore vm_page_free() races from interrupts against our * lookup, since if the caller is not protected our return value will not * be any more valid then otherwise once we exit the critical section. */ int inmem(struct vnode *vp, off_t loffset) { vm_object_t obj; vm_offset_t toff, tinc, size; vm_page_t m; int res = 1; if (findblk(vp, loffset, FINDBLK_TEST)) return 1; if (vp->v_mount == NULL) return 0; if ((obj = vp->v_object) == NULL) return 0; size = PAGE_SIZE; if (size > vp->v_mount->mnt_stat.f_iosize) size = vp->v_mount->mnt_stat.f_iosize; vm_object_hold(obj); for (toff = 0; toff < vp->v_mount->mnt_stat.f_iosize; toff += tinc) { m = vm_page_lookup(obj, OFF_TO_IDX(loffset + toff)); if (m == NULL) { res = 0; break; } tinc = size; if (tinc > PAGE_SIZE - ((toff + loffset) & PAGE_MASK)) tinc = PAGE_SIZE - ((toff + loffset) & PAGE_MASK); if (vm_page_is_valid(m, (vm_offset_t) ((toff + loffset) & PAGE_MASK), tinc) == 0) { res = 0; break; } } vm_object_drop(obj); return (res); } /* * findblk: * * Locate and return the specified buffer. Unless flagged otherwise, * a locked buffer will be returned if it exists or NULL if it does not. * * findblk()'d buffers are still on the bufqueues and if you intend * to use your (locked NON-TEST) buffer you need to bremfree(bp) * and possibly do other stuff to it. * * FINDBLK_TEST - Do not lock the buffer. The caller is responsible * for locking the buffer and ensuring that it remains * the desired buffer after locking. * * FINDBLK_NBLOCK - Lock the buffer non-blocking. If we are unable * to acquire the lock we return NULL, even if the * buffer exists. * * FINDBLK_REF - Returns the buffer ref'd, which prevents normal * reuse by getnewbuf() but does not prevent * disassociation (B_INVAL). Used to avoid deadlocks * against random (vp,loffset)s due to reassignment. * * (0) - Lock the buffer blocking. */ struct buf * findblk(struct vnode *vp, off_t loffset, int flags) { struct buf *bp; int lkflags; lkflags = LK_EXCLUSIVE; if (flags & FINDBLK_NBLOCK) lkflags |= LK_NOWAIT; for (;;) { /* * Lookup. Ref the buf while holding v_token to prevent * reuse (but does not prevent diassociation). */ lwkt_gettoken_shared(&vp->v_token); bp = buf_rb_hash_RB_LOOKUP(&vp->v_rbhash_tree, loffset); if (bp == NULL) { lwkt_reltoken(&vp->v_token); return(NULL); } bqhold(bp); lwkt_reltoken(&vp->v_token); /* * If testing only break and return bp, do not lock. */ if (flags & FINDBLK_TEST) break; /* * Lock the buffer, return an error if the lock fails. * (only FINDBLK_NBLOCK can cause the lock to fail). */ if (BUF_LOCK(bp, lkflags)) { atomic_subtract_int(&bp->b_refs, 1); /* bp = NULL; not needed */ return(NULL); } /* * Revalidate the locked buf before allowing it to be * returned. */ if (bp->b_vp == vp && bp->b_loffset == loffset) break; atomic_subtract_int(&bp->b_refs, 1); BUF_UNLOCK(bp); } /* * Success */ if ((flags & FINDBLK_REF) == 0) atomic_subtract_int(&bp->b_refs, 1); return(bp); } /* * getcacheblk: * * Similar to getblk() except only returns the buffer if it is * B_CACHE and requires no other manipulation. Otherwise NULL * is returned. NULL is also returned if GETBLK_NOWAIT is set * and the getblk() would block. * * If B_RAM is set the buffer might be just fine, but we return * NULL anyway because we want the code to fall through to the * cluster read. Otherwise read-ahead breaks. * * If blksize is 0 the buffer cache buffer must already be fully * cached. * * If blksize is non-zero getblk() will be used, allowing a buffer * to be reinstantiated from its VM backing store. The buffer must * still be fully cached after reinstantiation to be returned. */ struct buf * getcacheblk(struct vnode *vp, off_t loffset, int blksize, int blkflags) { struct buf *bp; int fndflags = (blkflags & GETBLK_NOWAIT) ? FINDBLK_NBLOCK : 0; if (blksize) { bp = getblk(vp, loffset, blksize, blkflags, 0); if (bp) { if ((bp->b_flags & (B_INVAL | B_CACHE | B_RAM)) == B_CACHE) { bp->b_flags &= ~B_AGE; } else { brelse(bp); bp = NULL; } } } else { bp = findblk(vp, loffset, fndflags); if (bp) { if ((bp->b_flags & (B_INVAL | B_CACHE | B_RAM)) == B_CACHE) { bp->b_flags &= ~B_AGE; bremfree(bp); } else { BUF_UNLOCK(bp); bp = NULL; } } } return (bp); } /* * getblk: * * Get a block given a specified block and offset into a file/device. * B_INVAL may or may not be set on return. The caller should clear * B_INVAL prior to initiating a READ. * * IT IS IMPORTANT TO UNDERSTAND THAT IF YOU CALL GETBLK() AND B_CACHE * IS NOT SET, YOU MUST INITIALIZE THE RETURNED BUFFER, ISSUE A READ, * OR SET B_INVAL BEFORE RETIRING IT. If you retire a getblk'd buffer * without doing any of those things the system will likely believe * the buffer to be valid (especially if it is not B_VMIO), and the * next getblk() will return the buffer with B_CACHE set. * * For a non-VMIO buffer, B_CACHE is set to the opposite of B_INVAL for * an existing buffer. * * For a VMIO buffer, B_CACHE is modified according to the backing VM. * If getblk()ing a previously 0-sized invalid buffer, B_CACHE is set * and then cleared based on the backing VM. If the previous buffer is * non-0-sized but invalid, B_CACHE will be cleared. * * If getblk() must create a new buffer, the new buffer is returned with * both B_INVAL and B_CACHE clear unless it is a VMIO buffer, in which * case it is returned with B_INVAL clear and B_CACHE set based on the * backing VM. * * getblk() also forces a bwrite() for any B_DELWRI buffer whos * B_CACHE bit is clear. * * What this means, basically, is that the caller should use B_CACHE to * determine whether the buffer is fully valid or not and should clear * B_INVAL prior to issuing a read. If the caller intends to validate * the buffer by loading its data area with something, the caller needs * to clear B_INVAL. If the caller does this without issuing an I/O, * the caller should set B_CACHE ( as an optimization ), else the caller * should issue the I/O and biodone() will set B_CACHE if the I/O was * a write attempt or if it was a successfull read. If the caller * intends to issue a READ, the caller must clear B_INVAL and B_ERROR * prior to issuing the READ. biodone() will *not* clear B_INVAL. * * getblk flags: * * GETBLK_PCATCH - catch signal if blocked, can cause NULL return * GETBLK_BHEAVY - heavy-weight buffer cache buffer */ struct buf * getblk(struct vnode *vp, off_t loffset, int size, int blkflags, int slptimeo) { struct buf *bp; int slpflags = (blkflags & GETBLK_PCATCH) ? PCATCH : 0; int error; int lkflags; if (size > MAXBSIZE) panic("getblk: size(%d) > MAXBSIZE(%d)", size, MAXBSIZE); if (vp->v_object == NULL) panic("getblk: vnode %p has no object!", vp); loop: if ((bp = findblk(vp, loffset, FINDBLK_REF | FINDBLK_TEST)) != NULL) { /* * The buffer was found in the cache, but we need to lock it. * We must acquire a ref on the bp to prevent reuse, but * this will not prevent disassociation (brelvp()) so we * must recheck (vp,loffset) after acquiring the lock. * * Without the ref the buffer could potentially be reused * before we acquire the lock and create a deadlock * situation between the thread trying to reuse the buffer * and us due to the fact that we would wind up blocking * on a random (vp,loffset). */ if (BUF_LOCK(bp, LK_EXCLUSIVE | LK_NOWAIT)) { if (blkflags & GETBLK_NOWAIT) { bqdrop(bp); return(NULL); } lkflags = LK_EXCLUSIVE | LK_SLEEPFAIL; if (blkflags & GETBLK_PCATCH) lkflags |= LK_PCATCH; error = BUF_TIMELOCK(bp, lkflags, "getblk", slptimeo); if (error) { bqdrop(bp); if (error == ENOLCK) goto loop; return (NULL); } /* buffer may have changed on us */ } bqdrop(bp); /* * Once the buffer has been locked, make sure we didn't race * a buffer recyclement. Buffers that are no longer hashed * will have b_vp == NULL, so this takes care of that check * as well. */ if (bp->b_vp != vp || bp->b_loffset != loffset) { kprintf("Warning buffer %p (vp %p loffset %lld) " "was recycled\n", bp, vp, (long long)loffset); BUF_UNLOCK(bp); goto loop; } /* * If SZMATCH any pre-existing buffer must be of the requested * size or NULL is returned. The caller absolutely does not * want getblk() to bwrite() the buffer on a size mismatch. */ if ((blkflags & GETBLK_SZMATCH) && size != bp->b_bcount) { BUF_UNLOCK(bp); return(NULL); } /* * All vnode-based buffers must be backed by a VM object. */ KKASSERT(bp->b_flags & B_VMIO); KKASSERT(bp->b_cmd == BUF_CMD_DONE); bp->b_flags &= ~B_AGE; /* * Make sure that B_INVAL buffers do not have a cached * block number translation. */ if ((bp->b_flags & B_INVAL) && (bp->b_bio2.bio_offset != NOOFFSET)) { kprintf("Warning invalid buffer %p (vp %p loffset %lld)" " did not have cleared bio_offset cache\n", bp, vp, (long long)loffset); clearbiocache(&bp->b_bio2); } /* * The buffer is locked. B_CACHE is cleared if the buffer is * invalid. */ if (bp->b_flags & B_INVAL) bp->b_flags &= ~B_CACHE; bremfree(bp); /* * Any size inconsistancy with a dirty buffer or a buffer * with a softupdates dependancy must be resolved. Resizing * the buffer in such circumstances can lead to problems. * * Dirty or dependant buffers are written synchronously. * Other types of buffers are simply released and * reconstituted as they may be backed by valid, dirty VM * pages (but not marked B_DELWRI). * * NFS NOTE: NFS buffers which straddle EOF are oddly-sized * and may be left over from a prior truncation (and thus * no longer represent the actual EOF point), so we * definitely do not want to B_NOCACHE the backing store. */ if (size != bp->b_bcount) { if (bp->b_flags & B_DELWRI) { bp->b_flags |= B_RELBUF; bwrite(bp); } else if (LIST_FIRST(&bp->b_dep)) { bp->b_flags |= B_RELBUF; bwrite(bp); } else { bp->b_flags |= B_RELBUF; brelse(bp); } goto loop; } KKASSERT(size <= bp->b_kvasize); KASSERT(bp->b_loffset != NOOFFSET, ("getblk: no buffer offset")); /* * A buffer with B_DELWRI set and B_CACHE clear must * be committed before we can return the buffer in * order to prevent the caller from issuing a read * ( due to B_CACHE not being set ) and overwriting * it. * * Most callers, including NFS and FFS, need this to * operate properly either because they assume they * can issue a read if B_CACHE is not set, or because * ( for example ) an uncached B_DELWRI might loop due * to softupdates re-dirtying the buffer. In the latter * case, B_CACHE is set after the first write completes, * preventing further loops. * * NOTE! b*write() sets B_CACHE. If we cleared B_CACHE * above while extending the buffer, we cannot allow the * buffer to remain with B_CACHE set after the write * completes or it will represent a corrupt state. To * deal with this we set B_NOCACHE to scrap the buffer * after the write. * * XXX Should this be B_RELBUF instead of B_NOCACHE? * I'm not even sure this state is still possible * now that getblk() writes out any dirty buffers * on size changes. * * We might be able to do something fancy, like setting * B_CACHE in bwrite() except if B_DELWRI is already set, * so the below call doesn't set B_CACHE, but that gets real * confusing. This is much easier. */ if ((bp->b_flags & (B_CACHE|B_DELWRI)) == B_DELWRI) { kprintf("getblk: Warning, bp %p loff=%jx DELWRI set " "and CACHE clear, b_flags %08x\n", bp, (uintmax_t)bp->b_loffset, bp->b_flags); bp->b_flags |= B_NOCACHE; bwrite(bp); goto loop; } } else { /* * Buffer is not in-core, create new buffer. The buffer * returned by getnewbuf() is locked. Note that the returned * buffer is also considered valid (not marked B_INVAL). * * Calculating the offset for the I/O requires figuring out * the block size. We use DEV_BSIZE for VBLK or VCHR and * the mount's f_iosize otherwise. If the vnode does not * have an associated mount we assume that the passed size is * the block size. * * Note that vn_isdisk() cannot be used here since it may * return a failure for numerous reasons. Note that the * buffer size may be larger then the block size (the caller * will use block numbers with the proper multiple). Beware * of using any v_* fields which are part of unions. In * particular, in DragonFly the mount point overloading * mechanism uses the namecache only and the underlying * directory vnode is not a special case. */ int bsize, maxsize; if (vp->v_type == VBLK || vp->v_type == VCHR) bsize = DEV_BSIZE; else if (vp->v_mount) bsize = vp->v_mount->mnt_stat.f_iosize; else bsize = size; maxsize = size + (loffset & PAGE_MASK); maxsize = imax(maxsize, bsize); bp = getnewbuf(blkflags, slptimeo, size, maxsize); if (bp == NULL) { if (slpflags || slptimeo) return NULL; goto loop; } /* * Atomically insert the buffer into the hash, so that it can * be found by findblk(). * * If bgetvp() returns non-zero a collision occured, and the * bp will not be associated with the vnode. * * Make sure the translation layer has been cleared. */ bp->b_loffset = loffset; bp->b_bio2.bio_offset = NOOFFSET; /* bp->b_bio2.bio_next = NULL; */ if (bgetvp(vp, bp, size)) { bp->b_flags |= B_INVAL; brelse(bp); goto loop; } /* * All vnode-based buffers must be backed by a VM object. */ KKASSERT(vp->v_object != NULL); bp->b_flags |= B_VMIO; KKASSERT(bp->b_cmd == BUF_CMD_DONE); allocbuf(bp, size); } KKASSERT(dsched_is_clear_buf_priv(bp)); return (bp); } /* * regetblk(bp) * * Reacquire a buffer that was previously released to the locked queue, * or reacquire a buffer which is interlocked by having bioops->io_deallocate * set B_LOCKED (which handles the acquisition race). * * To this end, either B_LOCKED must be set or the dependancy list must be * non-empty. */ void regetblk(struct buf *bp) { KKASSERT((bp->b_flags & B_LOCKED) || LIST_FIRST(&bp->b_dep) != NULL); BUF_LOCK(bp, LK_EXCLUSIVE | LK_RETRY); bremfree(bp); } /* * geteblk: * * Get an empty, disassociated buffer of given size. The buffer is * initially set to B_INVAL. * * critical section protection is not required for the allocbuf() * call because races are impossible here. */ struct buf * geteblk(int size) { struct buf *bp; int maxsize; maxsize = (size + BKVAMASK) & ~BKVAMASK; while ((bp = getnewbuf(0, 0, size, maxsize)) == NULL) ; allocbuf(bp, size); bp->b_flags |= B_INVAL; /* b_dep cleared by getnewbuf() */ KKASSERT(dsched_is_clear_buf_priv(bp)); return (bp); } /* * allocbuf: * * This code constitutes the buffer memory from either anonymous system * memory (in the case of non-VMIO operations) or from an associated * VM object (in the case of VMIO operations). This code is able to * resize a buffer up or down. * * Note that this code is tricky, and has many complications to resolve * deadlock or inconsistant data situations. Tread lightly!!! * There are B_CACHE and B_DELWRI interactions that must be dealt with by * the caller. Calling this code willy nilly can result in the loss of * data. * * allocbuf() only adjusts B_CACHE for VMIO buffers. getblk() deals with * B_CACHE for the non-VMIO case. * * This routine does not need to be called from a critical section but you * must own the buffer. */ int allocbuf(struct buf *bp, int size) { int newbsize, mbsize; int i; if (BUF_REFCNT(bp) == 0) panic("allocbuf: buffer not busy"); if (bp->b_kvasize < size) panic("allocbuf: buffer too small"); if ((bp->b_flags & B_VMIO) == 0) { caddr_t origbuf; int origbufsize; /* * Just get anonymous memory from the kernel. Don't * mess with B_CACHE. */ mbsize = (size + DEV_BSIZE - 1) & ~(DEV_BSIZE - 1); if (bp->b_flags & B_MALLOC) newbsize = mbsize; else newbsize = round_page(size); if (newbsize < bp->b_bufsize) { /* * Malloced buffers are not shrunk */ if (bp->b_flags & B_MALLOC) { if (newbsize) { bp->b_bcount = size; } else { kfree(bp->b_data, M_BIOBUF); if (bp->b_bufsize) { atomic_subtract_long(&bufmallocspace, bp->b_bufsize); bufspacewakeup(); bp->b_bufsize = 0; } bp->b_data = bp->b_kvabase; bp->b_bcount = 0; bp->b_flags &= ~B_MALLOC; } return 1; } vm_hold_free_pages( bp, (vm_offset_t) bp->b_data + newbsize, (vm_offset_t) bp->b_data + bp->b_bufsize); } else if (newbsize > bp->b_bufsize) { /* * We only use malloced memory on the first allocation. * and revert to page-allocated memory when the buffer * grows. */ if ((bufmallocspace < maxbufmallocspace) && (bp->b_bufsize == 0) && (mbsize <= PAGE_SIZE/2)) { bp->b_data = kmalloc(mbsize, M_BIOBUF, M_WAITOK); bp->b_bufsize = mbsize; bp->b_bcount = size; bp->b_flags |= B_MALLOC; atomic_add_long(&bufmallocspace, mbsize); return 1; } origbuf = NULL; origbufsize = 0; /* * If the buffer is growing on its other-than-first * allocation, then we revert to the page-allocation * scheme. */ if (bp->b_flags & B_MALLOC) { origbuf = bp->b_data; origbufsize = bp->b_bufsize; bp->b_data = bp->b_kvabase; if (bp->b_bufsize) { atomic_subtract_long(&bufmallocspace, bp->b_bufsize); bufspacewakeup(); bp->b_bufsize = 0; } bp->b_flags &= ~B_MALLOC; newbsize = round_page(newbsize); } vm_hold_load_pages( bp, (vm_offset_t) bp->b_data + bp->b_bufsize, (vm_offset_t) bp->b_data + newbsize); if (origbuf) { bcopy(origbuf, bp->b_data, origbufsize); kfree(origbuf, M_BIOBUF); } } } else { vm_page_t m; int desiredpages; newbsize = (size + DEV_BSIZE - 1) & ~(DEV_BSIZE - 1); desiredpages = ((int)(bp->b_loffset & PAGE_MASK) + newbsize + PAGE_MASK) >> PAGE_SHIFT; KKASSERT(desiredpages <= XIO_INTERNAL_PAGES); if (bp->b_flags & B_MALLOC) panic("allocbuf: VMIO buffer can't be malloced"); /* * Set B_CACHE initially if buffer is 0 length or will become * 0-length. */ if (size == 0 || bp->b_bufsize == 0) bp->b_flags |= B_CACHE; if (newbsize < bp->b_bufsize) { /* * DEV_BSIZE aligned new buffer size is less then the * DEV_BSIZE aligned existing buffer size. Figure out * if we have to remove any pages. */ if (desiredpages < bp->b_xio.xio_npages) { for (i = desiredpages; i < bp->b_xio.xio_npages; i++) { /* * the page is not freed here -- it * is the responsibility of * vnode_pager_setsize */ m = bp->b_xio.xio_pages[i]; KASSERT(m != bogus_page, ("allocbuf: bogus page found")); vm_page_busy_wait(m, TRUE, "biodep"); bp->b_xio.xio_pages[i] = NULL; vm_page_unwire(m, 0); vm_page_wakeup(m); } pmap_qremove((vm_offset_t) trunc_page((vm_offset_t)bp->b_data) + (desiredpages << PAGE_SHIFT), (bp->b_xio.xio_npages - desiredpages)); bp->b_xio.xio_npages = desiredpages; } } else if (size > bp->b_bcount) { /* * We are growing the buffer, possibly in a * byte-granular fashion. */ struct vnode *vp; vm_object_t obj; vm_offset_t toff; vm_offset_t tinc; /* * Step 1, bring in the VM pages from the object, * allocating them if necessary. We must clear * B_CACHE if these pages are not valid for the * range covered by the buffer. * * critical section protection is required to protect * against interrupts unbusying and freeing pages * between our vm_page_lookup() and our * busycheck/wiring call. */ vp = bp->b_vp; obj = vp->v_object; vm_object_hold(obj); while (bp->b_xio.xio_npages < desiredpages) { vm_page_t m; vm_pindex_t pi; int error; pi = OFF_TO_IDX(bp->b_loffset) + bp->b_xio.xio_npages; /* * Blocking on m->busy might lead to a * deadlock: * * vm_fault->getpages->cluster_read->allocbuf */ m = vm_page_lookup_busy_try(obj, pi, FALSE, &error); if (error) { vm_page_sleep_busy(m, FALSE, "pgtblk"); continue; } if (m == NULL) { /* * note: must allocate system pages * since blocking here could intefere * with paging I/O, no matter which * process we are. */ m = bio_page_alloc(bp, obj, pi, desiredpages - bp->b_xio.xio_npages); if (m) { vm_page_wire(m); vm_page_flag_clear(m, PG_ZERO); vm_page_wakeup(m); bp->b_flags &= ~B_CACHE; bp->b_xio.xio_pages[bp->b_xio.xio_npages] = m; ++bp->b_xio.xio_npages; } continue; } /* * We found a page and were able to busy it. */ vm_page_flag_clear(m, PG_ZERO); vm_page_wire(m); vm_page_wakeup(m); bp->b_xio.xio_pages[bp->b_xio.xio_npages] = m; ++bp->b_xio.xio_npages; if (bp->b_act_count < m->act_count) bp->b_act_count = m->act_count; } vm_object_drop(obj); /* * Step 2. We've loaded the pages into the buffer, * we have to figure out if we can still have B_CACHE * set. Note that B_CACHE is set according to the * byte-granular range ( bcount and size ), not the * aligned range ( newbsize ). * * The VM test is against m->valid, which is DEV_BSIZE * aligned. Needless to say, the validity of the data * needs to also be DEV_BSIZE aligned. Note that this * fails with NFS if the server or some other client * extends the file's EOF. If our buffer is resized, * B_CACHE may remain set! XXX */ toff = bp->b_bcount; tinc = PAGE_SIZE - ((bp->b_loffset + toff) & PAGE_MASK); while ((bp->b_flags & B_CACHE) && toff < size) { vm_pindex_t pi; if (tinc > (size - toff)) tinc = size - toff; pi = ((bp->b_loffset & PAGE_MASK) + toff) >> PAGE_SHIFT; vfs_buf_test_cache( bp, bp->b_loffset, toff, tinc, bp->b_xio.xio_pages[pi] ); toff += tinc; tinc = PAGE_SIZE; } /* * Step 3, fixup the KVM pmap. Remember that * bp->b_data is relative to bp->b_loffset, but * bp->b_loffset may be offset into the first page. */ bp->b_data = (caddr_t) trunc_page((vm_offset_t)bp->b_data); pmap_qenter( (vm_offset_t)bp->b_data, bp->b_xio.xio_pages, bp->b_xio.xio_npages ); bp->b_data = (caddr_t)((vm_offset_t)bp->b_data | (vm_offset_t)(bp->b_loffset & PAGE_MASK)); } } /* adjust space use on already-dirty buffer */ if (bp->b_flags & B_DELWRI) { /* dirtykvaspace unchanged */ atomic_add_long(&dirtybufspace, newbsize - bp->b_bufsize); if (bp->b_flags & B_HEAVY) { atomic_add_long(&dirtybufspacehw, newbsize - bp->b_bufsize); } } if (newbsize < bp->b_bufsize) bufspacewakeup(); bp->b_bufsize = newbsize; /* actual buffer allocation */ bp->b_bcount = size; /* requested buffer size */ return 1; } /* * biowait: * * Wait for buffer I/O completion, returning error status. B_EINTR * is converted into an EINTR error but not cleared (since a chain * of biowait() calls may occur). * * On return bpdone() will have been called but the buffer will remain * locked and will not have been brelse()'d. * * NOTE! If a timeout is specified and ETIMEDOUT occurs the I/O is * likely still in progress on return. * * NOTE! This operation is on a BIO, not a BUF. * * NOTE! BIO_DONE is cleared by vn_strategy() */ static __inline int _biowait(struct bio *bio, const char *wmesg, int to) { struct buf *bp = bio->bio_buf; u_int32_t flags; u_int32_t nflags; int error; KKASSERT(bio == &bp->b_bio1); for (;;) { flags = bio->bio_flags; if (flags & BIO_DONE) break; nflags = flags | BIO_WANT; tsleep_interlock(bio, 0); if (atomic_cmpset_int(&bio->bio_flags, flags, nflags)) { if (wmesg) error = tsleep(bio, PINTERLOCKED, wmesg, to); else if (bp->b_cmd == BUF_CMD_READ) error = tsleep(bio, PINTERLOCKED, "biord", to); else error = tsleep(bio, PINTERLOCKED, "biowr", to); if (error) { kprintf("tsleep error biowait %d\n", error); return (error); } } } /* * Finish up. */ KKASSERT(bp->b_cmd == BUF_CMD_DONE); bio->bio_flags &= ~(BIO_DONE | BIO_SYNC); if (bp->b_flags & B_EINTR) return (EINTR); if (bp->b_flags & B_ERROR) return (bp->b_error ? bp->b_error : EIO); return (0); } int biowait(struct bio *bio, const char *wmesg) { return(_biowait(bio, wmesg, 0)); } int biowait_timeout(struct bio *bio, const char *wmesg, int to) { return(_biowait(bio, wmesg, to)); } /* * This associates a tracking count with an I/O. vn_strategy() and * dev_dstrategy() do this automatically but there are a few cases * where a vnode or device layer is bypassed when a block translation * is cached. In such cases bio_start_transaction() may be called on * the bypassed layers so the system gets an I/O in progress indication * for those higher layers. */ void bio_start_transaction(struct bio *bio, struct bio_track *track) { bio->bio_track = track; if (dsched_is_clear_buf_priv(bio->bio_buf)) dsched_new_buf(bio->bio_buf); bio_track_ref(track); } /* * Initiate I/O on a vnode. * * SWAPCACHE OPERATION: * * Real buffer cache buffers have a non-NULL bp->b_vp. Unfortunately * devfs also uses b_vp for fake buffers so we also have to check * that B_PAGING is 0. In this case the passed 'vp' is probably the * underlying block device. The swap assignments are related to the * buffer cache buffer's b_vp, not the passed vp. * * The passed vp == bp->b_vp only in the case where the strategy call * is made on the vp itself for its own buffers (a regular file or * block device vp). The filesystem usually then re-calls vn_strategy() * after translating the request to an underlying device. * * Cluster buffers set B_CLUSTER and the passed vp is the vp of the * underlying buffer cache buffers. * * We can only deal with page-aligned buffers at the moment, because * we can't tell what the real dirty state for pages straddling a buffer * are. * * In order to call swap_pager_strategy() we must provide the VM object * and base offset for the underlying buffer cache pages so it can find * the swap blocks. */ void vn_strategy(struct vnode *vp, struct bio *bio) { struct bio_track *track; struct buf *bp = bio->bio_buf; KKASSERT(bp->b_cmd != BUF_CMD_DONE); /* * Set when an I/O is issued on the bp. Cleared by consumers * (aka HAMMER), allowing the consumer to determine if I/O had * actually occurred. */ bp->b_flags |= B_IODEBUG; /* * Handle the swap cache intercept. */ if (vn_cache_strategy(vp, bio)) return; /* * Otherwise do the operation through the filesystem */ if (bp->b_cmd == BUF_CMD_READ) track = &vp->v_track_read; else track = &vp->v_track_write; KKASSERT((bio->bio_flags & BIO_DONE) == 0); bio->bio_track = track; if (dsched_is_clear_buf_priv(bio->bio_buf)) dsched_new_buf(bio->bio_buf); bio_track_ref(track); vop_strategy(*vp->v_ops, vp, bio); } static void vn_cache_strategy_callback(struct bio *bio); int vn_cache_strategy(struct vnode *vp, struct bio *bio) { struct buf *bp = bio->bio_buf; struct bio *nbio; vm_object_t object; vm_page_t m; int i; /* * Is this buffer cache buffer suitable for reading from * the swap cache? */ if (vm_swapcache_read_enable == 0 || bp->b_cmd != BUF_CMD_READ || ((bp->b_flags & B_CLUSTER) == 0 && (bp->b_vp == NULL || (bp->b_flags & B_PAGING))) || ((int)bp->b_loffset & PAGE_MASK) != 0 || (bp->b_bcount & PAGE_MASK) != 0) { return(0); } /* * Figure out the original VM object (it will match the underlying * VM pages). Note that swap cached data uses page indices relative * to that object, not relative to bio->bio_offset. */ if (bp->b_flags & B_CLUSTER) object = vp->v_object; else object = bp->b_vp->v_object; /* * In order to be able to use the swap cache all underlying VM * pages must be marked as such, and we can't have any bogus pages. */ for (i = 0; i < bp->b_xio.xio_npages; ++i) { m = bp->b_xio.xio_pages[i]; if ((m->flags & PG_SWAPPED) == 0) break; if (m == bogus_page) break; } /* * If we are good then issue the I/O using swap_pager_strategy(). * * We can only do this if the buffer actually supports object-backed * I/O. If it doesn't npages will be 0. */ if (i && i == bp->b_xio.xio_npages) { m = bp->b_xio.xio_pages[0]; nbio = push_bio(bio); nbio->bio_done = vn_cache_strategy_callback; nbio->bio_offset = ptoa(m->pindex); KKASSERT(m->object == object); swap_pager_strategy(object, nbio); return(1); } return(0); } /* * This is a bit of a hack but since the vn_cache_strategy() function can * override a VFS's strategy function we must make sure that the bio, which * is probably bio2, doesn't leak an unexpected offset value back to the * filesystem. The filesystem (e.g. UFS) might otherwise assume that the * bio went through its own file strategy function and the the bio2 offset * is a cached disk offset when, in fact, it isn't. */ static void vn_cache_strategy_callback(struct bio *bio) { bio->bio_offset = NOOFFSET; biodone(pop_bio(bio)); } /* * bpdone: * * Finish I/O on a buffer after all BIOs have been processed. * Called when the bio chain is exhausted or by biowait. If called * by biowait, elseit is typically 0. * * bpdone is also responsible for setting B_CACHE in a B_VMIO bp. * In a non-VMIO bp, B_CACHE will be set on the next getblk() * assuming B_INVAL is clear. * * For the VMIO case, we set B_CACHE if the op was a read and no * read error occured, or if the op was a write. B_CACHE is never * set if the buffer is invalid or otherwise uncacheable. * * bpdone does not mess with B_INVAL, allowing the I/O routine or the * initiator to leave B_INVAL set to brelse the buffer out of existance * in the biodone routine. */ void bpdone(struct buf *bp, int elseit) { buf_cmd_t cmd; KASSERT(BUF_REFCNTNB(bp) > 0, ("biodone: bp %p not busy %d", bp, BUF_REFCNTNB(bp))); KASSERT(bp->b_cmd != BUF_CMD_DONE, ("biodone: bp %p already done!", bp)); /* * No more BIOs are left. All completion functions have been dealt * with, now we clean up the buffer. */ cmd = bp->b_cmd; bp->b_cmd = BUF_CMD_DONE; /* * Only reads and writes are processed past this point. */ if (cmd != BUF_CMD_READ && cmd != BUF_CMD_WRITE) { if (cmd == BUF_CMD_FREEBLKS) bp->b_flags |= B_NOCACHE; if (elseit) brelse(bp); return; } /* * Warning: softupdates may re-dirty the buffer, and HAMMER can do * a lot worse. XXX - move this above the clearing of b_cmd */ if (LIST_FIRST(&bp->b_dep) != NULL) buf_complete(bp); /* * A failed write must re-dirty the buffer unless B_INVAL * was set. Only applicable to normal buffers (with VPs). * vinum buffers may not have a vp. */ if (cmd == BUF_CMD_WRITE && (bp->b_flags & (B_ERROR | B_INVAL)) == B_ERROR) { bp->b_flags &= ~B_NOCACHE; if (bp->b_vp) bdirty(bp); } if (bp->b_flags & B_VMIO) { int i; vm_ooffset_t foff; vm_page_t m; vm_object_t obj; int iosize; struct vnode *vp = bp->b_vp; obj = vp->v_object; #if defined(VFS_BIO_DEBUG) if (vp->v_auxrefs == 0) panic("biodone: zero vnode hold count"); if ((vp->v_flag & VOBJBUF) == 0) panic("biodone: vnode is not setup for merged cache"); #endif foff = bp->b_loffset; KASSERT(foff != NOOFFSET, ("biodone: no buffer offset")); KASSERT(obj != NULL, ("biodone: missing VM object")); #if defined(VFS_BIO_DEBUG) if (obj->paging_in_progress < bp->b_xio.xio_npages) { kprintf("biodone: paging in progress(%d) < " "bp->b_xio.xio_npages(%d)\n", obj->paging_in_progress, bp->b_xio.xio_npages); } #endif /* * Set B_CACHE if the op was a normal read and no error * occured. B_CACHE is set for writes in the b*write() * routines. */ iosize = bp->b_bcount - bp->b_resid; if (cmd == BUF_CMD_READ && (bp->b_flags & (B_INVAL|B_NOCACHE|B_ERROR)) == 0) { bp->b_flags |= B_CACHE; } vm_object_hold(obj); for (i = 0; i < bp->b_xio.xio_npages; i++) { int bogusflag = 0; int resid; resid = ((foff + PAGE_SIZE) & ~(off_t)PAGE_MASK) - foff; if (resid > iosize) resid = iosize; /* * cleanup bogus pages, restoring the originals. Since * the originals should still be wired, we don't have * to worry about interrupt/freeing races destroying * the VM object association. */ m = bp->b_xio.xio_pages[i]; if (m == bogus_page) { bogusflag = 1; m = vm_page_lookup(obj, OFF_TO_IDX(foff)); if (m == NULL) panic("biodone: page disappeared"); bp->b_xio.xio_pages[i] = m; pmap_qenter(trunc_page((vm_offset_t)bp->b_data), bp->b_xio.xio_pages, bp->b_xio.xio_npages); } #if defined(VFS_BIO_DEBUG) if (OFF_TO_IDX(foff) != m->pindex) { kprintf("biodone: foff(%lu)/m->pindex(%ld) " "mismatch\n", (unsigned long)foff, (long)m->pindex); } #endif /* * In the write case, the valid and clean bits are * already changed correctly (see bdwrite()), so we * only need to do this here in the read case. */ vm_page_busy_wait(m, FALSE, "bpdpgw"); if (cmd == BUF_CMD_READ && !bogusflag && resid > 0) { vfs_clean_one_page(bp, i, m); } vm_page_flag_clear(m, PG_ZERO); /* * when debugging new filesystems or buffer I/O * methods, this is the most common error that pops * up. if you see this, you have not set the page * busy flag correctly!!! */ if (m->busy == 0) { kprintf("biodone: page busy < 0, " "pindex: %d, foff: 0x(%x,%x), " "resid: %d, index: %d\n", (int) m->pindex, (int)(foff >> 32), (int) foff & 0xffffffff, resid, i); if (!vn_isdisk(vp, NULL)) kprintf(" iosize: %ld, loffset: %lld, " "flags: 0x%08x, npages: %d\n", bp->b_vp->v_mount->mnt_stat.f_iosize, (long long)bp->b_loffset, bp->b_flags, bp->b_xio.xio_npages); else kprintf(" VDEV, loffset: %lld, flags: 0x%08x, npages: %d\n", (long long)bp->b_loffset, bp->b_flags, bp->b_xio.xio_npages); kprintf(" valid: 0x%x, dirty: 0x%x, " "wired: %d\n", m->valid, m->dirty, m->wire_count); panic("biodone: page busy < 0"); } vm_page_io_finish(m); vm_page_wakeup(m); vm_object_pip_wakeup(obj); foff = (foff + PAGE_SIZE) & ~(off_t)PAGE_MASK; iosize -= resid; } bp->b_flags &= ~B_HASBOGUS; vm_object_drop(obj); } /* * Finish up by releasing the buffer. There are no more synchronous * or asynchronous completions, those were handled by bio_done * callbacks. */ if (elseit) { if (bp->b_flags & (B_NOCACHE|B_INVAL|B_ERROR|B_RELBUF)) brelse(bp); else bqrelse(bp); } } /* * Normal biodone. */ void biodone(struct bio *bio) { struct buf *bp = bio->bio_buf; runningbufwakeup(bp); /* * Run up the chain of BIO's. Leave b_cmd intact for the duration. */ while (bio) { biodone_t *done_func; struct bio_track *track; /* * BIO tracking. Most but not all BIOs are tracked. */ if ((track = bio->bio_track) != NULL) { bio_track_rel(track); bio->bio_track = NULL; } /* * A bio_done function terminates the loop. The function * will be responsible for any further chaining and/or * buffer management. * * WARNING! The done function can deallocate the buffer! */ if ((done_func = bio->bio_done) != NULL) { bio->bio_done = NULL; done_func(bio); return; } bio = bio->bio_prev; } /* * If we've run out of bio's do normal [a]synchronous completion. */ bpdone(bp, 1); } /* * Synchronous biodone - this terminates a synchronous BIO. * * bpdone() is called with elseit=FALSE, leaving the buffer completed * but still locked. The caller must brelse() the buffer after waiting * for completion. */ void biodone_sync(struct bio *bio) { struct buf *bp = bio->bio_buf; int flags; int nflags; KKASSERT(bio == &bp->b_bio1); bpdone(bp, 0); for (;;) { flags = bio->bio_flags; nflags = (flags | BIO_DONE) & ~BIO_WANT; if (atomic_cmpset_int(&bio->bio_flags, flags, nflags)) { if (flags & BIO_WANT) wakeup(bio); break; } } } /* * vfs_unbusy_pages: * * This routine is called in lieu of iodone in the case of * incomplete I/O. This keeps the busy status for pages * consistant. */ void vfs_unbusy_pages(struct buf *bp) { int i; runningbufwakeup(bp); if (bp->b_flags & B_VMIO) { struct vnode *vp = bp->b_vp; vm_object_t obj; obj = vp->v_object; vm_object_hold(obj); for (i = 0; i < bp->b_xio.xio_npages; i++) { vm_page_t m = bp->b_xio.xio_pages[i]; /* * When restoring bogus changes the original pages * should still be wired, so we are in no danger of * losing the object association and do not need * critical section protection particularly. */ if (m == bogus_page) { m = vm_page_lookup(obj, OFF_TO_IDX(bp->b_loffset) + i); if (!m) { panic("vfs_unbusy_pages: page missing"); } bp->b_xio.xio_pages[i] = m; pmap_qenter(trunc_page((vm_offset_t)bp->b_data), bp->b_xio.xio_pages, bp->b_xio.xio_npages); } vm_page_busy_wait(m, FALSE, "bpdpgw"); vm_page_flag_clear(m, PG_ZERO); vm_page_io_finish(m); vm_page_wakeup(m); vm_object_pip_wakeup(obj); } bp->b_flags &= ~B_HASBOGUS; vm_object_drop(obj); } } /* * vfs_busy_pages: * * This routine is called before a device strategy routine. * It is used to tell the VM system that paging I/O is in * progress, and treat the pages associated with the buffer * almost as being PG_BUSY. Also the object 'paging_in_progress' * flag is handled to make sure that the object doesn't become * inconsistant. * * Since I/O has not been initiated yet, certain buffer flags * such as B_ERROR or B_INVAL may be in an inconsistant state * and should be ignored. */ void vfs_busy_pages(struct vnode *vp, struct buf *bp) { int i, bogus; struct lwp *lp = curthread->td_lwp; /* * The buffer's I/O command must already be set. If reading, * B_CACHE must be 0 (double check against callers only doing * I/O when B_CACHE is 0). */ KKASSERT(bp->b_cmd != BUF_CMD_DONE); KKASSERT(bp->b_cmd == BUF_CMD_WRITE || (bp->b_flags & B_CACHE) == 0); if (bp->b_flags & B_VMIO) { vm_object_t obj; obj = vp->v_object; KASSERT(bp->b_loffset != NOOFFSET, ("vfs_busy_pages: no buffer offset")); /* * Busy all the pages. We have to busy them all at once * to avoid deadlocks. */ retry: for (i = 0; i < bp->b_xio.xio_npages; i++) { vm_page_t m = bp->b_xio.xio_pages[i]; if (vm_page_busy_try(m, FALSE)) { vm_page_sleep_busy(m, FALSE, "vbpage"); while (--i >= 0) vm_page_wakeup(bp->b_xio.xio_pages[i]); goto retry; } } /* * Setup for I/O, soft-busy the page right now because * the next loop may block. */ for (i = 0; i < bp->b_xio.xio_npages; i++) { vm_page_t m = bp->b_xio.xio_pages[i]; vm_page_flag_clear(m, PG_ZERO); if ((bp->b_flags & B_CLUSTER) == 0) { vm_object_pip_add(obj, 1); vm_page_io_start(m); } } /* * Adjust protections for I/O and do bogus-page mapping. * Assume that vm_page_protect() can block (it can block * if VM_PROT_NONE, don't take any chances regardless). * * In particular note that for writes we must incorporate * page dirtyness from the VM system into the buffer's * dirty range. * * For reads we theoretically must incorporate page dirtyness * from the VM system to determine if the page needs bogus * replacement, but we shortcut the test by simply checking * that all m->valid bits are set, indicating that the page * is fully valid and does not need to be re-read. For any * VM system dirtyness the page will also be fully valid * since it was mapped at one point. */ bogus = 0; for (i = 0; i < bp->b_xio.xio_npages; i++) { vm_page_t m = bp->b_xio.xio_pages[i]; vm_page_flag_clear(m, PG_ZERO); /* XXX */ if (bp->b_cmd == BUF_CMD_WRITE) { /* * When readying a vnode-backed buffer for * a write we must zero-fill any invalid * portions of the backing VM pages, mark * it valid and clear related dirty bits. * * vfs_clean_one_page() incorporates any * VM dirtyness and updates the b_dirtyoff * range (after we've made the page RO). * * It is also expected that the pmap modified * bit has already been cleared by the * vm_page_protect(). We may not be able * to clear all dirty bits for a page if it * was also memory mapped (NFS). * * Finally be sure to unassign any swap-cache * backing store as it is now stale. */ vm_page_protect(m, VM_PROT_READ); vfs_clean_one_page(bp, i, m); swap_pager_unswapped(m); } else if (m->valid == VM_PAGE_BITS_ALL) { /* * When readying a vnode-backed buffer for * read we must replace any dirty pages with * a bogus page so dirty data is not destroyed * when filling gaps. * * To avoid testing whether the page is * dirty we instead test that the page was * at some point mapped (m->valid fully * valid) with the understanding that * this also covers the dirty case. */ bp->b_xio.xio_pages[i] = bogus_page; bp->b_flags |= B_HASBOGUS; bogus++; } else if (m->valid & m->dirty) { /* * This case should not occur as partial * dirtyment can only happen if the buffer * is B_CACHE, and this code is not entered * if the buffer is B_CACHE. */ kprintf("Warning: vfs_busy_pages - page not " "fully valid! loff=%jx bpf=%08x " "idx=%d val=%02x dir=%02x\n", (uintmax_t)bp->b_loffset, bp->b_flags, i, m->valid, m->dirty); vm_page_protect(m, VM_PROT_NONE); } else { /* * The page is not valid and can be made * part of the read. */ vm_page_protect(m, VM_PROT_NONE); } vm_page_wakeup(m); } if (bogus) { pmap_qenter(trunc_page((vm_offset_t)bp->b_data), bp->b_xio.xio_pages, bp->b_xio.xio_npages); } } /* * This is the easiest place to put the process accounting for the I/O * for now. */ if (lp != NULL) { if (bp->b_cmd == BUF_CMD_READ) lp->lwp_ru.ru_inblock++; else lp->lwp_ru.ru_oublock++; } } /* * Tell the VM system that the pages associated with this buffer * are clean. This is used for delayed writes where the data is * going to go to disk eventually without additional VM intevention. * * NOTE: While we only really need to clean through to b_bcount, we * just go ahead and clean through to b_bufsize. */ static void vfs_clean_pages(struct buf *bp) { vm_page_t m; int i; if ((bp->b_flags & B_VMIO) == 0) return; KASSERT(bp->b_loffset != NOOFFSET, ("vfs_clean_pages: no buffer offset")); for (i = 0; i < bp->b_xio.xio_npages; i++) { m = bp->b_xio.xio_pages[i]; vfs_clean_one_page(bp, i, m); } } /* * vfs_clean_one_page: * * Set the valid bits and clear the dirty bits in a page within a * buffer. The range is restricted to the buffer's size and the * buffer's logical offset might index into the first page. * * The caller has busied or soft-busied the page and it is not mapped, * test and incorporate the dirty bits into b_dirtyoff/end before * clearing them. Note that we need to clear the pmap modified bits * after determining the the page was dirty, vm_page_set_validclean() * does not do it for us. * * This routine is typically called after a read completes (dirty should * be zero in that case as we are not called on bogus-replace pages), * or before a write is initiated. */ static void vfs_clean_one_page(struct buf *bp, int pageno, vm_page_t m) { int bcount; int xoff; int soff; int eoff; /* * Calculate offset range within the page but relative to buffer's * loffset. loffset might be offset into the first page. */ xoff = (int)bp->b_loffset & PAGE_MASK; /* loffset offset into pg 0 */ bcount = bp->b_bcount + xoff; /* offset adjusted */ if (pageno == 0) { soff = xoff; eoff = PAGE_SIZE; } else { soff = (pageno << PAGE_SHIFT); eoff = soff + PAGE_SIZE; } if (eoff > bcount) eoff = bcount; if (soff >= eoff) return; /* * Test dirty bits and adjust b_dirtyoff/end. * * If dirty pages are incorporated into the bp any prior * B_NEEDCOMMIT state (NFS) must be cleared because the * caller has not taken into account the new dirty data. * * If the page was memory mapped the dirty bits might go beyond the * end of the buffer, but we can't really make the assumption that * a file EOF straddles the buffer (even though this is the case for * NFS if B_NEEDCOMMIT is also set). So for the purposes of clearing * B_NEEDCOMMIT we only test the dirty bits covered by the buffer. * This also saves some console spam. * * When clearing B_NEEDCOMMIT we must also clear B_CLUSTEROK, * NFS can handle huge commits but not huge writes. */ vm_page_test_dirty(m); if (m->dirty) { if ((bp->b_flags & B_NEEDCOMMIT) && (m->dirty & vm_page_bits(soff & PAGE_MASK, eoff - soff))) { if (debug_commit) kprintf("Warning: vfs_clean_one_page: bp %p " "loff=%jx,%d flgs=%08x clr B_NEEDCOMMIT" " cmd %d vd %02x/%02x x/s/e %d %d %d " "doff/end %d %d\n", bp, (uintmax_t)bp->b_loffset, bp->b_bcount, bp->b_flags, bp->b_cmd, m->valid, m->dirty, xoff, soff, eoff, bp->b_dirtyoff, bp->b_dirtyend); bp->b_flags &= ~(B_NEEDCOMMIT | B_CLUSTEROK); if (debug_commit) print_backtrace(-1); } /* * Only clear the pmap modified bits if ALL the dirty bits * are set, otherwise the system might mis-clear portions * of a page. */ if (m->dirty == VM_PAGE_BITS_ALL && (bp->b_flags & B_NEEDCOMMIT) == 0) { pmap_clear_modify(m); } if (bp->b_dirtyoff > soff - xoff) bp->b_dirtyoff = soff - xoff; if (bp->b_dirtyend < eoff - xoff) bp->b_dirtyend = eoff - xoff; } /* * Set related valid bits, clear related dirty bits. * Does not mess with the pmap modified bit. * * WARNING! We cannot just clear all of m->dirty here as the * buffer cache buffers may use a DEV_BSIZE'd aligned * block size, or have an odd size (e.g. NFS at file EOF). * The putpages code can clear m->dirty to 0. * * If a VOP_WRITE generates a buffer cache buffer which * covers the same space as mapped writable pages the * buffer flush might not be able to clear all the dirty * bits and still require a putpages from the VM system * to finish it off. * * WARNING! vm_page_set_validclean() currently assumes vm_token * is held. The page might not be busied (bdwrite() case). * XXX remove this comment once we've validated that this * is no longer an issue. */ vm_page_set_validclean(m, soff & PAGE_MASK, eoff - soff); } #if 0 /* * Similar to vfs_clean_one_page() but sets the bits to valid and dirty. * The page data is assumed to be valid (there is no zeroing here). */ static void vfs_dirty_one_page(struct buf *bp, int pageno, vm_page_t m) { int bcount; int xoff; int soff; int eoff; /* * Calculate offset range within the page but relative to buffer's * loffset. loffset might be offset into the first page. */ xoff = (int)bp->b_loffset & PAGE_MASK; /* loffset offset into pg 0 */ bcount = bp->b_bcount + xoff; /* offset adjusted */ if (pageno == 0) { soff = xoff; eoff = PAGE_SIZE; } else { soff = (pageno << PAGE_SHIFT); eoff = soff + PAGE_SIZE; } if (eoff > bcount) eoff = bcount; if (soff >= eoff) return; vm_page_set_validdirty(m, soff & PAGE_MASK, eoff - soff); } #endif /* * vfs_bio_clrbuf: * * Clear a buffer. This routine essentially fakes an I/O, so we need * to clear B_ERROR and B_INVAL. * * Note that while we only theoretically need to clear through b_bcount, * we go ahead and clear through b_bufsize. */ void vfs_bio_clrbuf(struct buf *bp) { int i, mask = 0; caddr_t sa, ea; if ((bp->b_flags & (B_VMIO | B_MALLOC)) == B_VMIO) { bp->b_flags &= ~(B_INVAL | B_EINTR | B_ERROR); if ((bp->b_xio.xio_npages == 1) && (bp->b_bufsize < PAGE_SIZE) && (bp->b_loffset & PAGE_MASK) == 0) { mask = (1 << (bp->b_bufsize / DEV_BSIZE)) - 1; if ((bp->b_xio.xio_pages[0]->valid & mask) == mask) { bp->b_resid = 0; return; } if (((bp->b_xio.xio_pages[0]->flags & PG_ZERO) == 0) && ((bp->b_xio.xio_pages[0]->valid & mask) == 0)) { bzero(bp->b_data, bp->b_bufsize); bp->b_xio.xio_pages[0]->valid |= mask; bp->b_resid = 0; return; } } sa = bp->b_data; for(i=0;ib_xio.xio_npages;i++,sa=ea) { int j = ((vm_offset_t)sa & PAGE_MASK) / DEV_BSIZE; ea = (caddr_t)trunc_page((vm_offset_t)sa + PAGE_SIZE); ea = (caddr_t)(vm_offset_t)ulmin( (u_long)(vm_offset_t)ea, (u_long)(vm_offset_t)bp->b_data + bp->b_bufsize); mask = ((1 << ((ea - sa) / DEV_BSIZE)) - 1) << j; if ((bp->b_xio.xio_pages[i]->valid & mask) == mask) continue; if ((bp->b_xio.xio_pages[i]->valid & mask) == 0) { if ((bp->b_xio.xio_pages[i]->flags & PG_ZERO) == 0) { bzero(sa, ea - sa); } } else { for (; sa < ea; sa += DEV_BSIZE, j++) { if (((bp->b_xio.xio_pages[i]->flags & PG_ZERO) == 0) && (bp->b_xio.xio_pages[i]->valid & (1<b_xio.xio_pages[i]->valid |= mask; vm_page_flag_clear(bp->b_xio.xio_pages[i], PG_ZERO); } bp->b_resid = 0; } else { clrbuf(bp); } } /* * vm_hold_load_pages: * * Load pages into the buffer's address space. The pages are * allocated from the kernel object in order to reduce interference * with the any VM paging I/O activity. The range of loaded * pages will be wired. * * If a page cannot be allocated, the 'pagedaemon' is woken up to * retrieve the full range (to - from) of pages. */ void vm_hold_load_pages(struct buf *bp, vm_offset_t from, vm_offset_t to) { vm_offset_t pg; vm_page_t p; int index; to = round_page(to); from = round_page(from); index = (from - trunc_page((vm_offset_t)bp->b_data)) >> PAGE_SHIFT; pg = from; while (pg < to) { /* * Note: must allocate system pages since blocking here * could intefere with paging I/O, no matter which * process we are. */ vm_object_hold(&kernel_object); p = bio_page_alloc(bp, &kernel_object, pg >> PAGE_SHIFT, (vm_pindex_t)((to - pg) >> PAGE_SHIFT)); vm_object_drop(&kernel_object); if (p) { vm_page_wire(p); p->valid = VM_PAGE_BITS_ALL; vm_page_flag_clear(p, PG_ZERO); pmap_kenter(pg, VM_PAGE_TO_PHYS(p)); bp->b_xio.xio_pages[index] = p; vm_page_wakeup(p); pg += PAGE_SIZE; ++index; } } bp->b_xio.xio_npages = index; } /* * Allocate a page for a buffer cache buffer. * * If NULL is returned the caller is expected to retry (typically check if * the page already exists on retry before trying to allocate one). * * NOTE! Low-memory handling is dealt with in b[q]relse(), not here. This * function will use the system reserve with the hope that the page * allocations can be returned to PQ_CACHE/PQ_FREE when the caller * is done with the buffer. * * NOTE! However, TMPFS is a special case because flushing a dirty buffer * to TMPFS doesn't clean the page. For TMPFS, only the pagedaemon * is capable of retiring pages (to swap). For TMPFS we don't dig * into the system reserve because doing so could stall out pretty * much every process running on the system. */ static vm_page_t bio_page_alloc(struct buf *bp, vm_object_t obj, vm_pindex_t pg, int deficit) { int vmflags = VM_ALLOC_NORMAL | VM_ALLOC_NULL_OK; vm_page_t p; ASSERT_LWKT_TOKEN_HELD(vm_object_token(obj)); /* * Try a normal allocation first. */ p = vm_page_alloc(obj, pg, vmflags); if (p) return(p); if (vm_page_lookup(obj, pg)) return(NULL); vm_pageout_deficit += deficit; /* * Try again, digging into the system reserve. * * Trying to recover pages from the buffer cache here can deadlock * against other threads trying to busy underlying pages so we * depend on the code in brelse() and bqrelse() to free/cache the * underlying buffer cache pages when memory is low. */ if (curthread->td_flags & TDF_SYSTHREAD) vmflags |= VM_ALLOC_SYSTEM | VM_ALLOC_INTERRUPT; else if (bp->b_vp && bp->b_vp->v_tag == VT_TMPFS) vmflags |= 0; else vmflags |= VM_ALLOC_SYSTEM; /*recoverbufpages();*/ p = vm_page_alloc(obj, pg, vmflags); if (p) return(p); if (vm_page_lookup(obj, pg)) return(NULL); /* * Wait for memory to free up and try again */ if (vm_page_count_severe()) ++lowmempgallocs; vm_wait(hz / 20 + 1); p = vm_page_alloc(obj, pg, vmflags); if (p) return(p); if (vm_page_lookup(obj, pg)) return(NULL); /* * Ok, now we are really in trouble. */ { static struct krate biokrate = { .freq = 1 }; krateprintf(&biokrate, "Warning: bio_page_alloc: memory exhausted " "during bufcache page allocation from %s\n", curthread->td_comm); } if (curthread->td_flags & TDF_SYSTHREAD) vm_wait(hz / 20 + 1); else vm_wait(hz / 2 + 1); return (NULL); } /* * vm_hold_free_pages: * * Return pages associated with the buffer back to the VM system. * * The range of pages underlying the buffer's address space will * be unmapped and un-wired. */ void vm_hold_free_pages(struct buf *bp, vm_offset_t from, vm_offset_t to) { vm_offset_t pg; vm_page_t p; int index, newnpages; from = round_page(from); to = round_page(to); index = (from - trunc_page((vm_offset_t)bp->b_data)) >> PAGE_SHIFT; newnpages = index; for (pg = from; pg < to; pg += PAGE_SIZE, index++) { p = bp->b_xio.xio_pages[index]; if (p && (index < bp->b_xio.xio_npages)) { if (p->busy) { kprintf("vm_hold_free_pages: doffset: %lld, " "loffset: %lld\n", (long long)bp->b_bio2.bio_offset, (long long)bp->b_loffset); } bp->b_xio.xio_pages[index] = NULL; pmap_kremove(pg); vm_page_busy_wait(p, FALSE, "vmhldpg"); vm_page_unwire(p, 0); vm_page_free(p); } } bp->b_xio.xio_npages = newnpages; } /* * vmapbuf: * * Map a user buffer into KVM via a pbuf. On return the buffer's * b_data, b_bufsize, and b_bcount will be set, and its XIO page array * initialized. */ int vmapbuf(struct buf *bp, caddr_t udata, int bytes) { caddr_t addr; vm_offset_t va; vm_page_t m; int vmprot; int error; int pidx; int i; /* * bp had better have a command and it better be a pbuf. */ KKASSERT(bp->b_cmd != BUF_CMD_DONE); KKASSERT(bp->b_flags & B_PAGING); KKASSERT(bp->b_kvabase); if (bytes < 0) return (-1); /* * Map the user data into KVM. Mappings have to be page-aligned. */ addr = (caddr_t)trunc_page((vm_offset_t)udata); pidx = 0; vmprot = VM_PROT_READ; if (bp->b_cmd == BUF_CMD_READ) vmprot |= VM_PROT_WRITE; while (addr < udata + bytes) { /* * Do the vm_fault if needed; do the copy-on-write thing * when reading stuff off device into memory. * * vm_fault_page*() returns a held VM page. */ va = (addr >= udata) ? (vm_offset_t)addr : (vm_offset_t)udata; va = trunc_page(va); m = vm_fault_page_quick(va, vmprot, &error); if (m == NULL) { for (i = 0; i < pidx; ++i) { vm_page_unhold(bp->b_xio.xio_pages[i]); bp->b_xio.xio_pages[i] = NULL; } return(-1); } bp->b_xio.xio_pages[pidx] = m; addr += PAGE_SIZE; ++pidx; } /* * Map the page array and set the buffer fields to point to * the mapped data buffer. */ if (pidx > btoc(MAXPHYS)) panic("vmapbuf: mapped more than MAXPHYS"); pmap_qenter((vm_offset_t)bp->b_kvabase, bp->b_xio.xio_pages, pidx); bp->b_xio.xio_npages = pidx; bp->b_data = bp->b_kvabase + ((int)(intptr_t)udata & PAGE_MASK); bp->b_bcount = bytes; bp->b_bufsize = bytes; return(0); } /* * vunmapbuf: * * Free the io map PTEs associated with this IO operation. * We also invalidate the TLB entries and restore the original b_addr. */ void vunmapbuf(struct buf *bp) { int pidx; int npages; KKASSERT(bp->b_flags & B_PAGING); npages = bp->b_xio.xio_npages; pmap_qremove(trunc_page((vm_offset_t)bp->b_data), npages); for (pidx = 0; pidx < npages; ++pidx) { vm_page_unhold(bp->b_xio.xio_pages[pidx]); bp->b_xio.xio_pages[pidx] = NULL; } bp->b_xio.xio_npages = 0; bp->b_data = bp->b_kvabase; } /* * Scan all buffers in the system and issue the callback. */ int scan_all_buffers(int (*callback)(struct buf *, void *), void *info) { int count = 0; int error; long n; for (n = 0; n < nbuf; ++n) { if ((error = callback(&buf[n], info)) < 0) { count = error; break; } count += error; } return (count); } /* * nestiobuf_iodone: biodone callback for nested buffers and propagate * completion to the master buffer. */ static void nestiobuf_iodone(struct bio *bio) { struct bio *mbio; struct buf *mbp, *bp; struct devstat *stats; int error; int donebytes; bp = bio->bio_buf; mbio = bio->bio_caller_info1.ptr; stats = bio->bio_caller_info2.ptr; mbp = mbio->bio_buf; KKASSERT(bp->b_bcount <= bp->b_bufsize); KKASSERT(mbp != bp); error = bp->b_error; if (bp->b_error == 0 && (bp->b_bcount < bp->b_bufsize || bp->b_resid > 0)) { /* * Not all got transfered, raise an error. We have no way to * propagate these conditions to mbp. */ error = EIO; } donebytes = bp->b_bufsize; relpbuf(bp, NULL); nestiobuf_done(mbio, donebytes, error, stats); } void nestiobuf_done(struct bio *mbio, int donebytes, int error, struct devstat *stats) { struct buf *mbp; mbp = mbio->bio_buf; KKASSERT((int)(intptr_t)mbio->bio_driver_info > 0); /* * If an error occured, propagate it to the master buffer. * * Several biodone()s may wind up running concurrently so * use an atomic op to adjust b_flags. */ if (error) { mbp->b_error = error; atomic_set_int(&mbp->b_flags, B_ERROR); } /* * Decrement the operations in progress counter and terminate the * I/O if this was the last bit. */ if (atomic_fetchadd_int((int *)&mbio->bio_driver_info, -1) == 1) { mbp->b_resid = 0; if (stats) devstat_end_transaction_buf(stats, mbp); biodone(mbio); } } /* * Initialize a nestiobuf for use. Set an initial count of 1 to prevent * the mbio from being biodone()'d while we are still adding sub-bios to * it. */ void nestiobuf_init(struct bio *bio) { bio->bio_driver_info = (void *)1; } /* * The BIOs added to the nestedio have already been started, remove the * count that placeheld our mbio and biodone() it if the count would * transition to 0. */ void nestiobuf_start(struct bio *mbio) { struct buf *mbp = mbio->bio_buf; /* * Decrement the operations in progress counter and terminate the * I/O if this was the last bit. */ if (atomic_fetchadd_int((int *)&mbio->bio_driver_info, -1) == 1) { if (mbp->b_flags & B_ERROR) mbp->b_resid = mbp->b_bcount; else mbp->b_resid = 0; biodone(mbio); } } /* * Set an intermediate error prior to calling nestiobuf_start() */ void nestiobuf_error(struct bio *mbio, int error) { struct buf *mbp = mbio->bio_buf; if (error) { mbp->b_error = error; atomic_set_int(&mbp->b_flags, B_ERROR); } } /* * nestiobuf_add: setup a "nested" buffer. * * => 'mbp' is a "master" buffer which is being divided into sub pieces. * => 'bp' should be a buffer allocated by getiobuf. * => 'offset' is a byte offset in the master buffer. * => 'size' is a size in bytes of this nested buffer. */ void nestiobuf_add(struct bio *mbio, struct buf *bp, int offset, size_t size, struct devstat *stats) { struct buf *mbp = mbio->bio_buf; struct vnode *vp = mbp->b_vp; KKASSERT(mbp->b_bcount >= offset + size); atomic_add_int((int *)&mbio->bio_driver_info, 1); /* kernel needs to own the lock for it to be released in biodone */ BUF_KERNPROC(bp); bp->b_vp = vp; bp->b_cmd = mbp->b_cmd; bp->b_bio1.bio_done = nestiobuf_iodone; bp->b_data = (char *)mbp->b_data + offset; bp->b_resid = bp->b_bcount = size; bp->b_bufsize = bp->b_bcount; bp->b_bio1.bio_track = NULL; bp->b_bio1.bio_caller_info1.ptr = mbio; bp->b_bio1.bio_caller_info2.ptr = stats; } #ifdef DDB DB_SHOW_COMMAND(buffer, db_show_buffer) { /* get args */ struct buf *bp = (struct buf *)addr; if (!have_addr) { db_printf("usage: show buffer \n"); return; } db_printf("b_flags = 0x%b\n", (u_int)bp->b_flags, PRINT_BUF_FLAGS); db_printf("b_cmd = %d\n", bp->b_cmd); db_printf("b_error = %d, b_bufsize = %d, b_bcount = %d, " "b_resid = %d\n, b_data = %p, " "bio_offset(disk) = %lld, bio_offset(phys) = %lld\n", bp->b_error, bp->b_bufsize, bp->b_bcount, bp->b_resid, bp->b_data, (long long)bp->b_bio2.bio_offset, (long long)(bp->b_bio2.bio_next ? bp->b_bio2.bio_next->bio_offset : (off_t)-1)); if (bp->b_xio.xio_npages) { int i; db_printf("b_xio.xio_npages = %d, pages(OBJ, IDX, PA): ", bp->b_xio.xio_npages); for (i = 0; i < bp->b_xio.xio_npages; i++) { vm_page_t m; m = bp->b_xio.xio_pages[i]; db_printf("(%p, 0x%lx, 0x%lx)", (void *)m->object, (u_long)m->pindex, (u_long)VM_PAGE_TO_PHYS(m)); if ((i + 1) < bp->b_xio.xio_npages) db_printf(","); } db_printf("\n"); } } #endif /* DDB */