1 /* $NetBSD: uplcom.c,v 1.20 2001/07/31 12:33:11 ichiro Exp $ */
2 /* $FreeBSD: src/sys/dev/usb/uplcom.c,v 1.8.2.1 2002/08/08 18:45:04 joe Exp $ */
5 * Copyright (c) 2001-2002, Shunsuke Akiyama <akiyama@jp.FreeBSD.org>.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 * Copyright (c) 2001 The NetBSD Foundation, Inc.
32 * All rights reserved.
34 * This code is derived from software contributed to The NetBSD Foundation
35 * by Ichiro FUKUHARA (ichiro@ichiro.org).
37 * Redistribution and use in source and binary forms, with or without
38 * modification, are permitted provided that the following conditions
40 * 1. Redistributions of source code must retain the above copyright
41 * notice, this list of conditions and the following disclaimer.
42 * 2. Redistributions in binary form must reproduce the above copyright
43 * notice, this list of conditions and the following disclaimer in the
44 * documentation and/or other materials provided with the distribution.
45 * 3. All advertising materials mentioning features or use of this software
46 * must display the following acknowledgement:
47 * This product includes software developed by the NetBSD
48 * Foundation, Inc. and its contributors.
49 * 4. Neither the name of The NetBSD Foundation nor the names of its
50 * contributors may be used to endorse or promote products derived
51 * from this software without specific prior written permission.
53 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
54 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
55 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
56 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
57 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
58 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
59 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
60 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
61 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
62 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
63 * POSSIBILITY OF SUCH DAMAGE.
68 * http://www.prolific.com.tw/download/DataSheet/pl2303_ds11.PDF
69 * http://www.nisseisg.co.jp/jyouhou/_cp/@gif/2303.pdf
74 #include <sys/param.h>
75 #include <sys/systm.h>
76 #include <sys/kernel.h>
77 #include <sys/malloc.h>
79 #include <sys/ioccom.h>
80 #include <sys/fcntl.h>
84 #if __FreeBSD_version >= 500014
85 #include <sys/selinfo.h>
87 #include <sys/select.h>
90 #include <sys/vnode.h>
92 #include <sys/sysctl.h>
94 #include <dev/usb/usb.h>
95 #include <dev/usb/usbcdc.h>
97 #include <dev/usb/usbdi.h>
98 #include <dev/usb/usbdi_util.h>
99 #include <dev/usb/usbdevs.h>
100 #include <dev/usb/usb_quirks.h>
102 #include <dev/usb/ucomvar.h>
105 static int uplcomdebug = 0;
106 SYSCTL_NODE(_hw_usb, OID_AUTO, uplcom, CTLFLAG_RW, 0, "USB uplcom");
107 SYSCTL_INT(_hw_usb_uplcom, OID_AUTO, debug, CTLFLAG_RW,
108 &uplcomdebug, 0, "uplcom debug level");
110 #define DPRINTFN(n, x) do { \
111 if (uplcomdebug > (n)) \
115 #define DPRINTFN(n, x)
117 #define DPRINTF(x) DPRINTFN(0, x)
119 #define UPLCOM_MODVER 1 /* module version */
121 #define UPLCOM_CONFIG_INDEX 0
122 #define UPLCOM_IFACE_INDEX 0
123 #define UPLCOM_SECOND_IFACE_INDEX 1
125 #define UPLCOM_INTR_INTERVAL 100 /* ms */
127 #define UPLCOM_SET_REQUEST 0x01
128 #define UPLCOM_SET_CRTSCTS 0x41
129 #define RSAQ_STATUS_DSR 0x02
130 #define RSAQ_STATUS_DCD 0x01
132 struct uplcom_softc {
133 struct ucom_softc sc_ucom;
135 int sc_iface_number; /* interface number */
137 usbd_interface_handle sc_intr_iface; /* interrupt interface */
138 int sc_intr_number; /* interrupt number */
139 usbd_pipe_handle sc_intr_pipe; /* interrupt pipe */
140 u_char *sc_intr_buf; /* interrupt buffer */
143 usb_cdc_line_state_t sc_line_state; /* current line state */
144 u_char sc_dtr; /* current DTR state */
145 u_char sc_rts; /* current RTS state */
148 u_char sc_lsr; /* Local status register */
149 u_char sc_msr; /* uplcom status register */
153 * These are the maximum number of bytes transferred per frame.
154 * The output buffer size cannot be increased due to the size encoding.
156 #define UPLCOMIBUFSIZE 256
157 #define UPLCOMOBUFSIZE 256
159 Static usbd_status uplcom_reset(struct uplcom_softc *);
160 Static usbd_status uplcom_set_line_coding(struct uplcom_softc *,
161 usb_cdc_line_state_t *);
162 Static usbd_status uplcom_set_crtscts(struct uplcom_softc *);
163 Static void uplcom_intr(usbd_xfer_handle, usbd_private_handle, usbd_status);
165 Static void uplcom_set(void *, int, int, int);
166 Static void uplcom_dtr(struct uplcom_softc *, int);
167 Static void uplcom_rts(struct uplcom_softc *, int);
168 Static void uplcom_break(struct uplcom_softc *, int);
169 Static void uplcom_set_line_state(struct uplcom_softc *);
170 Static void uplcom_get_status(void *, int, u_char *, u_char *);
172 Static int uplcom_ioctl(void *, int, u_long, caddr_t, int, usb_proc_ptr);
174 Static int uplcom_param(void *, int, struct termios *);
175 Static int uplcom_open(void *, int);
176 Static void uplcom_close(void *, int);
178 struct ucom_callback uplcom_callback = {
182 NULL, /* uplcom_ioctl, TODO */
189 static const struct uplcom_product {
192 } uplcom_products [] = {
193 /* I/O DATA USB-RSAQ */
194 { USB_VENDOR_IODATA, USB_PRODUCT_IODATA_USBRSAQ },
195 /* I/O DATA USB-RSAQ2 */
196 { USB_VENDOR_PROLIFIC, USB_PRODUCT_PROLIFIC_RSAQ2 },
197 /* PLANEX USB-RS232 URS-03 */
198 { USB_VENDOR_ATEN, USB_PRODUCT_ATEN_UC232A },
199 /* IOGEAR/ATEN UC-232A */
200 { USB_VENDOR_PROLIFIC, USB_PRODUCT_PROLIFIC_PL2303 },
201 /* TDK USB-PHS Adapter UHA6400 */
202 { USB_VENDOR_TDK, USB_PRODUCT_TDK_UHA6400 },
203 /* RATOC REX-USB60 */
204 { USB_VENDOR_RATOC, USB_PRODUCT_RATOC_REXUSB60 },
206 { USB_VENDOR_ELECOM, USB_PRODUCT_ELECOM_UCSGT },
210 Static device_probe_t uplcom_match;
211 Static device_attach_t uplcom_attach;
212 Static device_detach_t uplcom_detach;
214 Static device_method_t uplcom_methods[] = {
215 /* Device interface */
216 DEVMETHOD(device_probe, uplcom_match),
217 DEVMETHOD(device_attach, uplcom_attach),
218 DEVMETHOD(device_detach, uplcom_detach),
222 Static driver_t uplcom_driver = {
225 sizeof (struct uplcom_softc)
228 DRIVER_MODULE(uplcom, uhub, uplcom_driver, ucom_devclass, usbd_driver_load, 0);
229 MODULE_DEPEND(uplcom, usb, 1, 1, 1);
230 MODULE_DEPEND(uplcom, ucom, UCOM_MINVER, UCOM_PREFVER, UCOM_MAXVER);
231 MODULE_VERSION(uplcom, UPLCOM_MODVER);
235 USB_MATCH_START(uplcom, uaa);
238 if (uaa->iface != NULL)
239 return (UMATCH_NONE);
241 for (i = 0; uplcom_products[i].vendor != 0; i++) {
242 if (uplcom_products[i].vendor == uaa->vendor &&
243 uplcom_products[i].product == uaa->product) {
244 return (UMATCH_VENDOR_PRODUCT);
247 return (UMATCH_NONE);
252 USB_ATTACH_START(uplcom, sc, uaa);
253 usbd_device_handle dev = uaa->device;
254 struct ucom_softc *ucom;
255 usb_config_descriptor_t *cdesc;
256 usb_interface_descriptor_t *id;
257 usb_endpoint_descriptor_t *ed;
263 devinfo = malloc(1024, M_USBDEV, M_WAITOK);
266 bzero(sc, sizeof (struct uplcom_softc));
268 usbd_devinfo(dev, 0, devinfo);
269 /* USB_ATTACH_SETUP; */
271 device_set_desc_copy(self, devinfo);
272 /* USB_ATTACH_SETUP; */
275 ucom->sc_iface = uaa->iface;
277 devname = USBDEVNAME(ucom->sc_dev);
278 printf("%s: %s\n", devname, devinfo);
280 DPRINTF(("uplcom attach: sc = %p\n", sc));
282 /* initialize endpoints */
283 ucom->sc_bulkin_no = ucom->sc_bulkout_no = -1;
284 sc->sc_intr_number = -1;
285 sc->sc_intr_pipe = NULL;
287 /* Move the device into the configured state. */
288 err = usbd_set_config_index(dev, UPLCOM_CONFIG_INDEX, 1);
290 printf("%s: failed to set configuration: %s\n",
291 devname, usbd_errstr(err));
296 /* get the config descriptor */
297 cdesc = usbd_get_config_descriptor(ucom->sc_udev);
300 printf("%s: failed to get configuration descriptor\n",
301 USBDEVNAME(ucom->sc_dev));
306 /* get the (first/common) interface */
307 err = usbd_device2interface_handle(dev, UPLCOM_IFACE_INDEX,
310 printf("%s: failed to get interface: %s\n",
311 devname, usbd_errstr(err));
316 /* Find the interrupt endpoints */
318 id = usbd_get_interface_descriptor(ucom->sc_iface);
319 sc->sc_iface_number = id->bInterfaceNumber;
321 for (i = 0; i < id->bNumEndpoints; i++) {
322 ed = usbd_interface2endpoint_descriptor(ucom->sc_iface, i);
324 printf("%s: no endpoint descriptor for %d\n",
325 USBDEVNAME(ucom->sc_dev), i);
330 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
331 UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
332 sc->sc_intr_number = ed->bEndpointAddress;
333 sc->sc_isize = UGETW(ed->wMaxPacketSize);
337 if (sc->sc_intr_number == -1) {
338 printf("%s: Could not find interrupt in\n",
339 USBDEVNAME(ucom->sc_dev));
344 /* keep interface for interrupt */
345 sc->sc_intr_iface = ucom->sc_iface;
348 * USB-RSAQ1 has two interface
350 * USB-RSAQ1 | USB-RSAQ2
351 * -----------------+-----------------
352 * Interface 0 |Interface 0
353 * Interrupt(0x81) | Interrupt(0x81)
354 * -----------------+ BulkIN(0x02)
355 * Interface 1 | BulkOUT(0x83)
359 if (cdesc->bNumInterface == 2) {
360 err = usbd_device2interface_handle(dev,
361 UPLCOM_SECOND_IFACE_INDEX,
364 printf("%s: failed to get second interface: %s\n",
365 devname, usbd_errstr(err));
371 /* Find the bulk{in,out} endpoints */
373 id = usbd_get_interface_descriptor(ucom->sc_iface);
374 sc->sc_iface_number = id->bInterfaceNumber;
376 for (i = 0; i < id->bNumEndpoints; i++) {
377 ed = usbd_interface2endpoint_descriptor(ucom->sc_iface, i);
379 printf("%s: no endpoint descriptor for %d\n",
380 USBDEVNAME(ucom->sc_dev), i);
385 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
386 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
387 ucom->sc_bulkin_no = ed->bEndpointAddress;
388 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
389 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
390 ucom->sc_bulkout_no = ed->bEndpointAddress;
394 if (ucom->sc_bulkin_no == -1) {
395 printf("%s: Could not find data bulk in\n",
396 USBDEVNAME(ucom->sc_dev));
401 if (ucom->sc_bulkout_no == -1) {
402 printf("%s: Could not find data bulk out\n",
403 USBDEVNAME(ucom->sc_dev));
408 sc->sc_dtr = sc->sc_rts = -1;
409 ucom->sc_parent = sc;
410 ucom->sc_portno = UCOM_UNK_PORTNO;
411 /* bulkin, bulkout set above */
412 ucom->sc_ibufsize = UPLCOMIBUFSIZE;
413 ucom->sc_obufsize = UPLCOMOBUFSIZE;
414 ucom->sc_ibufsizepad = UPLCOMIBUFSIZE;
415 ucom->sc_opkthdrlen = 0;
416 ucom->sc_callback = &uplcom_callback;
418 err = uplcom_reset(sc);
421 printf("%s: reset failed: %s\n",
422 USBDEVNAME(ucom->sc_dev), usbd_errstr(err));
427 DPRINTF(("uplcom: in = 0x%x, out = 0x%x, intr = 0x%x\n",
428 ucom->sc_bulkin_no, ucom->sc_bulkout_no, sc->sc_intr_number));
430 ucom_attach(&sc->sc_ucom);
432 free(devinfo, M_USBDEV);
433 USB_ATTACH_SUCCESS_RETURN;
436 free(devinfo, M_USBDEV);
437 USB_ATTACH_ERROR_RETURN;
442 USB_DETACH_START(uplcom, sc);
445 DPRINTF(("uplcom_detach: sc = %p\n", sc));
447 if (sc->sc_intr_pipe != NULL) {
448 usbd_abort_pipe(sc->sc_intr_pipe);
449 usbd_close_pipe(sc->sc_intr_pipe);
450 free(sc->sc_intr_buf, M_USBDEV);
451 sc->sc_intr_pipe = NULL;
454 sc->sc_ucom.sc_dying = 1;
456 rv = ucom_detach(&sc->sc_ucom);
462 uplcom_reset(struct uplcom_softc *sc)
464 usb_device_request_t req;
467 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
468 req.bRequest = UPLCOM_SET_REQUEST;
469 USETW(req.wValue, 0);
470 USETW(req.wIndex, sc->sc_iface_number);
471 USETW(req.wLength, 0);
473 err = usbd_do_request(sc->sc_ucom.sc_udev, &req, 0);
475 printf("%s: uplcom_reset: %s\n",
476 USBDEVNAME(sc->sc_ucom.sc_dev), usbd_errstr(err));
484 uplcom_set_line_state(struct uplcom_softc *sc)
486 usb_device_request_t req;
490 ls = (sc->sc_dtr ? UCDC_LINE_DTR : 0) |
491 (sc->sc_rts ? UCDC_LINE_RTS : 0);
492 req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
493 req.bRequest = UCDC_SET_CONTROL_LINE_STATE;
494 USETW(req.wValue, ls);
495 USETW(req.wIndex, sc->sc_iface_number);
496 USETW(req.wLength, 0);
498 err = usbd_do_request(sc->sc_ucom.sc_udev, &req, 0);
500 printf("%s: uplcom_set_line_status: %s\n",
501 USBDEVNAME(sc->sc_ucom.sc_dev), usbd_errstr(err));
505 uplcom_set(void *addr, int portno, int reg, int onoff)
507 struct uplcom_softc *sc = addr;
511 uplcom_dtr(sc, onoff);
514 uplcom_rts(sc, onoff);
517 uplcom_break(sc, onoff);
525 uplcom_dtr(struct uplcom_softc *sc, int onoff)
527 DPRINTF(("uplcom_dtr: onoff = %d\n", onoff));
529 if (sc->sc_dtr == onoff)
533 uplcom_set_line_state(sc);
537 uplcom_rts(struct uplcom_softc *sc, int onoff)
539 DPRINTF(("uplcom_rts: onoff = %d\n", onoff));
541 if (sc->sc_rts == onoff)
545 uplcom_set_line_state(sc);
549 uplcom_break(struct uplcom_softc *sc, int onoff)
551 usb_device_request_t req;
554 DPRINTF(("uplcom_break: onoff = %d\n", onoff));
556 req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
557 req.bRequest = UCDC_SEND_BREAK;
558 USETW(req.wValue, onoff ? UCDC_BREAK_ON : UCDC_BREAK_OFF);
559 USETW(req.wIndex, sc->sc_iface_number);
560 USETW(req.wLength, 0);
562 err = usbd_do_request(sc->sc_ucom.sc_udev, &req, 0);
564 printf("%s: uplcom_break: %s\n",
565 USBDEVNAME(sc->sc_ucom.sc_dev), usbd_errstr(err));
569 uplcom_set_crtscts(struct uplcom_softc *sc)
571 usb_device_request_t req;
574 DPRINTF(("uplcom_set_crtscts: on\n"));
576 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
577 req.bRequest = UPLCOM_SET_REQUEST;
578 USETW(req.wValue, 0);
579 USETW(req.wIndex, UPLCOM_SET_CRTSCTS);
580 USETW(req.wLength, 0);
582 err = usbd_do_request(sc->sc_ucom.sc_udev, &req, 0);
584 printf("%s: uplcom_set_crtscts: %s\n",
585 USBDEVNAME(sc->sc_ucom.sc_dev), usbd_errstr(err));
589 return (USBD_NORMAL_COMPLETION);
593 uplcom_set_line_coding(struct uplcom_softc *sc, usb_cdc_line_state_t *state)
595 usb_device_request_t req;
599 "uplcom_set_line_coding: rate = %d, fmt = %d, parity = %d bits = %d\n",
600 UGETDW(state->dwDTERate), state->bCharFormat,
601 state->bParityType, state->bDataBits));
603 if (memcmp(state, &sc->sc_line_state, UCDC_LINE_STATE_LENGTH) == 0) {
604 DPRINTF(("uplcom_set_line_coding: already set\n"));
605 return (USBD_NORMAL_COMPLETION);
608 req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
609 req.bRequest = UCDC_SET_LINE_CODING;
610 USETW(req.wValue, 0);
611 USETW(req.wIndex, sc->sc_iface_number);
612 USETW(req.wLength, UCDC_LINE_STATE_LENGTH);
614 err = usbd_do_request(sc->sc_ucom.sc_udev, &req, state);
616 printf("%s: uplcom_set_line_coding: %s\n",
617 USBDEVNAME(sc->sc_ucom.sc_dev), usbd_errstr(err));
621 sc->sc_line_state = *state;
623 return (USBD_NORMAL_COMPLETION);
627 uplcom_param(void *addr, int portno, struct termios *t)
629 struct uplcom_softc *sc = addr;
631 usb_cdc_line_state_t ls;
633 DPRINTF(("uplcom_param: sc = %p\n", sc));
635 USETDW(ls.dwDTERate, t->c_ospeed);
636 if (ISSET(t->c_cflag, CSTOPB))
637 ls.bCharFormat = UCDC_STOP_BIT_2;
639 ls.bCharFormat = UCDC_STOP_BIT_1;
640 if (ISSET(t->c_cflag, PARENB)) {
641 if (ISSET(t->c_cflag, PARODD))
642 ls.bParityType = UCDC_PARITY_ODD;
644 ls.bParityType = UCDC_PARITY_EVEN;
646 ls.bParityType = UCDC_PARITY_NONE;
647 switch (ISSET(t->c_cflag, CSIZE)) {
662 err = uplcom_set_line_coding(sc, &ls);
666 if (ISSET(t->c_cflag, CRTSCTS)) {
667 err = uplcom_set_crtscts(sc);
676 uplcom_open(void *addr, int portno)
678 struct uplcom_softc *sc = addr;
681 if (sc->sc_ucom.sc_dying)
684 DPRINTF(("uplcom_open: sc = %p\n", sc));
686 if (sc->sc_intr_number != -1 && sc->sc_intr_pipe == NULL) {
687 sc->sc_status = 0; /* clear status bit */
688 sc->sc_intr_buf = malloc(sc->sc_isize, M_USBDEV, M_WAITOK);
689 err = usbd_open_pipe_intr(sc->sc_intr_iface,
697 UPLCOM_INTR_INTERVAL);
699 printf("%s: cannot open interrupt pipe (addr %d)\n",
700 USBDEVNAME(sc->sc_ucom.sc_dev),
710 uplcom_close(void *addr, int portno)
712 struct uplcom_softc *sc = addr;
715 if (sc->sc_ucom.sc_dying)
718 DPRINTF(("uplcom_close: close\n"));
720 if (sc->sc_intr_pipe != NULL) {
721 err = usbd_abort_pipe(sc->sc_intr_pipe);
723 printf("%s: abort interrupt pipe failed: %s\n",
724 USBDEVNAME(sc->sc_ucom.sc_dev),
726 err = usbd_close_pipe(sc->sc_intr_pipe);
728 printf("%s: close interrupt pipe failed: %s\n",
729 USBDEVNAME(sc->sc_ucom.sc_dev),
731 free(sc->sc_intr_buf, M_USBDEV);
732 sc->sc_intr_pipe = NULL;
737 uplcom_intr(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status)
739 struct uplcom_softc *sc = priv;
740 u_char *buf = sc->sc_intr_buf;
743 if (sc->sc_ucom.sc_dying)
746 if (status != USBD_NORMAL_COMPLETION) {
747 if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
750 DPRINTF(("%s: uplcom_intr: abnormal status: %s\n",
751 USBDEVNAME(sc->sc_ucom.sc_dev),
752 usbd_errstr(status)));
753 usbd_clear_endpoint_stall_async(sc->sc_intr_pipe);
757 DPRINTF(("%s: uplcom status = %02x\n",
758 USBDEVNAME(sc->sc_ucom.sc_dev), buf[8]));
760 sc->sc_lsr = sc->sc_msr = 0;
762 if (ISSET(pstatus, RSAQ_STATUS_DSR))
763 sc->sc_msr |= UMSR_DSR;
764 if (ISSET(pstatus, RSAQ_STATUS_DCD))
765 sc->sc_msr |= UMSR_DCD;
766 ucom_status_change(&sc->sc_ucom);
770 uplcom_get_status(void *addr, int portno, u_char *lsr, u_char *msr)
772 struct uplcom_softc *sc = addr;
774 DPRINTF(("uplcom_get_status:\n"));
784 uplcom_ioctl(void *addr, int portno, u_long cmd, caddr_t data, int flag,
787 struct uplcom_softc *sc = addr;
790 if (sc->sc_ucom.sc_dying)
793 DPRINTF(("uplcom_ioctl: cmd = 0x%08lx\n", cmd));
799 case USB_GET_CM_OVER_DATA:
800 case USB_SET_CM_OVER_DATA:
804 DPRINTF(("uplcom_ioctl: unknown\n"));